909 files changed, 11 insertions, 287223 deletions

diff --git a/tmk_core/protocol/lufa.mk b/tmk_core/protocol/lufa.mk
index b0f8919007..cd9450755d 100644
--- a/tmk_core/protocol/lufa.mk
+++ b/tmk_core/protocol/lufa.mk
@@ -18,11 +18,7 @@ LUFA_SRC = lufa.c \
 	   $(LUFA_SRC_USB)
 
 ifeq ($(strip $(MIDI_ENABLE)), yes)
-	LUFA_SRC += midi/midi.c \
-	   midi/midi_device.c \
-	   midi/bytequeue/bytequeue.c \
-	   midi/bytequeue/interrupt_setting.c \
-	   $(LUFA_SRC_USBCLASS)
+	include $(TMK_PATH)/protocol/midi.mk
 endif
 
 ifeq ($(strip $(BLUETOOTH_ENABLE)), yes)
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/AudioInput.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/AudioInput.c
deleted file mode 100644
index 7c1cf46076..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/AudioInput.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the AudioInput demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "AudioInput.h"
-
-/** LUFA Audio Class driver interface configuration and state information. This structure is
- *  passed to all Audio Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_Audio_Device_t Microphone_Audio_Interface =
-	{
-		.Config =
-			{
-				.ControlInterfaceNumber   = INTERFACE_ID_AudioControl,
-				.StreamingInterfaceNumber = INTERFACE_ID_AudioStream,
-				.DataINEndpoint           =
-					{
-						.Address          = AUDIO_STREAM_EPADDR,
-						.Size             = AUDIO_STREAM_EPSIZE,
-						.Banks            = 2,
-					},
-			},
-	};
-
-/** Current audio sampling frequency of the streaming audio endpoint. */
-static uint32_t CurrentAudioSampleFrequency = 48000;
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		Audio_Device_USBTask(&Microphone_Audio_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	Buttons_Init();
-	ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
-	ADC_SetupChannel(MIC_IN_ADC_CHANNEL);
-	USB_Init();
-
-	/* Start the ADC conversion in free running mode */
-	ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
-}
-
-/** ISR to handle the reloading of the data endpoint with the next sample. */
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)
-{
-	uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
-
-	/* Check that the USB bus is ready for the next sample to write */
-	if (Audio_Device_IsReadyForNextSample(&Microphone_Audio_Interface))
-	{
-		int16_t AudioSample;
-
-		#if defined(USE_TEST_TONE)
-			static uint8_t SquareWaveSampleCount;
-			static int16_t CurrentWaveValue;
-
-			/* In test tone mode, generate a square wave at 1/256 of the sample rate */
-			if (SquareWaveSampleCount++ == 0xFF)
-			  CurrentWaveValue ^= 0x8000;
-
-			/* Only generate audio if the board button is being pressed */
-			AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;
-		#else
-			/* Audio sample is ADC value scaled to fit the entire range */
-			AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());
-
-			#if defined(MICROPHONE_BIASED_TO_HALF_RAIL)
-			/* Microphone is biased to half rail voltage, subtract the bias from the sample value */
-			AudioSample -= (SAMPLE_MAX_RANGE / 2);
-			#endif
-		#endif
-
-		Audio_Device_WriteSample16(&Microphone_Audio_Interface, AudioSample);
-	}
-
-	Endpoint_SelectEndpoint(PrevEndpoint);
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	/* Sample reload timer initialization */
-	TIMSK0  = (1 << OCIE0A);
-	OCR0A   = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
-	TCCR0A  = (1 << WGM01);  // CTC mode
-	TCCR0B  = (1 << CS01);   // Fcpu/8 speed
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Stop the sample reload timer */
-	TCCR0B = 0;
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= Audio_Device_ConfigureEndpoints(&Microphone_Audio_Interface);
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	Audio_Device_ProcessControlRequest(&Microphone_Audio_Interface);
-}
-
-/** Audio class driver callback for the setting and retrieval of streaming endpoint properties. This callback must be implemented
- *  in the user application to handle property manipulations on streaming audio endpoints.
- *
- *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
- *  the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
- *  to indicate the size of the retrieved data.
- *
- *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
- *        of the \c DataLength parameter.
- *
- *  \param[in,out] AudioInterfaceInfo  Pointer to a structure containing an Audio Class configuration and state.
- *  \param[in]     EndpointProperty    Property of the endpoint to get or set, a value from Audio_ClassRequests_t.
- *  \param[in]     EndpointAddress     Address of the streaming endpoint whose property is being referenced.
- *  \param[in]     EndpointControl     Parameter of the endpoint to get or set, a value from Audio_EndpointControls_t.
- *  \param[in,out] DataLength          For SET operations, the length of the parameter data to set. For GET operations, the maximum
- *                                     length of the retrieved data. When NULL, the function should return whether the given property
- *                                     and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
- *  \param[in,out] Data                Pointer to a location where the parameter data is stored for SET operations, or where
- *                                     the retrieved data is to be stored for GET operations.
- *
- *  \return Boolean \c true if the property get/set was successful, \c false otherwise
- */
-bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
-                                                  const uint8_t EndpointProperty,
-                                                  const uint8_t EndpointAddress,
-                                                  const uint8_t EndpointControl,
-                                                  uint16_t* const DataLength,
-                                                  uint8_t* Data)
-{
-	/* Check the requested endpoint to see if a supported endpoint is being manipulated */
-	if (EndpointAddress == Microphone_Audio_Interface.Config.DataINEndpoint.Address)
-	{
-		/* Check the requested control to see if a supported control is being manipulated */
-		if (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)
-		{
-			switch (EndpointProperty)
-			{
-				case AUDIO_REQ_SetCurrent:
-					/* Check if we are just testing for a valid property, or actually adjusting it */
-					if (DataLength != NULL)
-					{
-						/* Set the new sampling frequency to the value given by the host */
-						CurrentAudioSampleFrequency = (((uint32_t)Data[2] << 16) | ((uint32_t)Data[1] << 8) | (uint32_t)Data[0]);
-
-						/* Adjust sample reload timer to the new frequency */
-						OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
-					}
-
-					return true;
-				case AUDIO_REQ_GetCurrent:
-					/* Check if we are just testing for a valid property, or actually reading it */
-					if (DataLength != NULL)
-					{
-						*DataLength = 3;
-
-						Data[2] = (CurrentAudioSampleFrequency >> 16);
-						Data[1] = (CurrentAudioSampleFrequency >> 8);
-						Data[0] = (CurrentAudioSampleFrequency &  0xFF);
-					}
-
-					return true;
-			}
-		}
-	}
-
-	return false;
-}
-
-/** Audio class driver callback for the setting and retrieval of streaming interface properties. This callback must be implemented
- *  in the user application to handle property manipulations on streaming audio interfaces.
- *
- *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
- *  the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations
- *  to indicate the size of the retrieved data.
- *
- *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
- *        of the \c DataLength parameter.
- *
- *  \param[in,out] AudioInterfaceInfo  Pointer to a structure containing an Audio Class configuration and state.
- *  \param[in]     Property            Property of the interface to get or set, a value from Audio_ClassRequests_t.
- *  \param[in]     EntityAddress       Address of the audio entity whose property is being referenced.
- *  \param[in]     Parameter           Parameter of the entity to get or set, specific to each type of entity (see USB Audio specification).
- *  \param[in,out] DataLength          For SET operations, the length of the parameter data to set. For GET operations, the maximum
- *                                     length of the retrieved data. When NULL, the function should return whether the given property
- *                                     and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
- *  \param[in,out] Data                Pointer to a location where the parameter data is stored for SET operations, or where
- *                                     the retrieved data is to be stored for GET operations.
- *
- *  \return Boolean \c true if the property GET/SET was successful, \c false otherwise
- */
-bool CALLBACK_Audio_Device_GetSetInterfaceProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
-                                                   const uint8_t Property,
-                                                   const uint8_t EntityAddress,
-                                                   const uint16_t Parameter,
-                                                   uint16_t* const DataLength,
-                                                   uint8_t* Data)
-{
-	/* No audio interface entities in the device descriptor, thus no properties to get or set. */
-	return false;
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/AudioInput.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/AudioInput.h
deleted file mode 100644
index 0090f2a0f2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/AudioInput.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for AudioInput.c.
- */
-
-#ifndef _AUDIO_INPUT_H_
-#define _AUDIO_INPUT_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/Peripheral/ADC.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "Descriptors.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Maximum audio sample value for the microphone input. */
-		#define SAMPLE_MAX_RANGE          0xFFFF
-
-		/** Maximum ADC range for the microphone input. */
-		#define ADC_MAX_RANGE             0x3FF
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-		bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
-		                                                  const uint8_t EndpointProperty,
-		                                                  const uint8_t EndpointAddress,
-		                                                  const uint8_t EndpointControl,
-		                                                  uint16_t* const DataLength,
-		                                                  uint8_t* Data) ATTR_NON_NULL_PTR_ARG(1);
-		bool CALLBACK_Audio_Device_GetSetInterfaceProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
-		                                                   const uint8_t Property,
-		                                                   const uint8_t EntityAddress,
-		                                                   const uint16_t Parameter,
-		                                                   uint16_t* const DataLength,
-		                                                   uint8_t* Data);
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/AudioInput.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
deleted file mode 100644
index 4b0594244d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/AudioInput.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Audio Input Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Standard Audio Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Audio 1.0 Class Specification \n
- *        USBIF Audio 1.0 Class Terminal Types Specification \n
- *        USBIF Audio 1.0 Data Formats Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Audio demonstration application. This gives a simple reference
- *  application for implementing a USB Audio Input device using the
- *  basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers
- *  required).
- *
- *  On start-up the system will automatically enumerate and function as a
- *  USB microphone. By default, the demo will produce a square wave test tone
- *  when the board button is pressed. If USE_TEST_TONE is not defined in the
- *  project makefile, incoming audio from the ADC channel 1 will be sampled
- *  and sent to the host computer instead.
- *
- *  When in microphone mode, connect a microphone to the ADC channel 2.
- *
- *  Under Windows, if a driver request dialogue pops up, select the option
- *  to automatically install the appropriate drivers.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>MIC_IN_ADC_CHANNEL</td>
- *    <td>AppConfig.h</td>
- *    <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
- *   </tr>
- *   <tr>
- *    <td>USE_TEST_TONE</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
- *        instead of sampling the board microphone.</td>
- *   </tr>
- *   <tr>
- *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h
deleted file mode 100644
index 8360102f64..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define MIC_IN_ADC_CHANNEL               2
-
-	#define MICROPHONE_BIASED_TO_HALF_RAIL
-	#define USE_TEST_TONE
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/Config/LUFAConfig.h
deleted file mode 100644
index 796221604d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/Descriptors.c
deleted file mode 100644
index f87ed9761d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/Descriptors.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(2,0,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2047,
-	.ReleaseNumber          = VERSION_BCD(0,0,2),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces          = 2,
-
-			.ConfigurationNumber      = 1,
-			.ConfigurationStrIndex    = NO_DESCRIPTOR,
-
-			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
-		},
-
-	.Audio_ControlInterface =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioControl,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 0,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_ControlSubclass,
-			.Protocol                 = AUDIO_CSCP_ControlProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_ControlInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
-
-			.ACSpecification          = VERSION_BCD(1,0,0),
-			.TotalLength              = (sizeof(USB_Audio_Descriptor_Interface_AC_t) +
-			                             sizeof(USB_Audio_Descriptor_InputTerminal_t) +
-			                             sizeof(USB_Audio_Descriptor_OutputTerminal_t)),
-
-			.InCollection             = 1,
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-		},
-
-	.Audio_InputTerminal =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
-
-			.TerminalID               = 0x01,
-			.TerminalType             = AUDIO_TERMINAL_IN_MIC,
-			.AssociatedOutputTerminal = 0x00,
-
-			.TotalChannels            = 1,
-			.ChannelConfig            = 0,
-
-			.ChannelStrIndex          = NO_DESCRIPTOR,
-			.TerminalStrIndex         = NO_DESCRIPTOR
-		},
-
-	.Audio_OutputTerminal =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
-
-			.TerminalID               = 0x02,
-			.TerminalType             = AUDIO_TERMINAL_STREAMING,
-			.AssociatedInputTerminal  = 0x00,
-
-			.SourceID                 = 0x01,
-
-			.TerminalStrIndex         = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_Alt0 =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 0,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
-			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_Alt1 =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-			.AlternateSetting         = 1,
-
-			.TotalEndpoints           = 1,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
-			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
-
-			.TerminalLink             = 0x02,
-
-			.FrameDelay               = 1,
-			.AudioFormat              = 0x0001
-		},
-
-	.Audio_AudioFormat =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Format_t) +
-			                                     sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates),
-			                             .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_FormatType,
-
-			.FormatType               = 0x01,
-			.Channels                 = 0x01,
-
-			.SubFrameSize             = 0x02,
-			.BitResolution            = 16,
-
-			.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t))
-		},
-
-	.Audio_AudioFormatSampleRates =
-		{
-			AUDIO_SAMPLE_FREQ(8000),
-			AUDIO_SAMPLE_FREQ(11025),
-			AUDIO_SAMPLE_FREQ(22050),
-			AUDIO_SAMPLE_FREQ(44100),
-			AUDIO_SAMPLE_FREQ(48000),
-		},
-
-	.Audio_StreamEndpoint =
-		{
-			.Endpoint =
-				{
-					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
-
-					.EndpointAddress     = AUDIO_STREAM_EPADDR,
-					.Attributes          = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
-					.EndpointSize        = AUDIO_STREAM_EPSIZE,
-					.PollingIntervalMS   = 0x01
-				},
-
-			.Refresh                  = 0,
-			.SyncEndpointNumber       = 0
-		},
-
-	.Audio_StreamEndpoint_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint},
-			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
-
-			.Attributes               = (AUDIO_EP_ACCEPTS_SMALL_PACKETS | AUDIO_EP_SAMPLE_FREQ_CONTROL),
-
-			.LockDelayUnits           = 0x00,
-			.LockDelay                = 0x0000
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Audio In Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/Descriptors.h
deleted file mode 100644
index 1cecf5d846..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/Descriptors.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the Audio isochronous streaming data IN endpoint. */
-		#define AUDIO_STREAM_EPADDR           (ENDPOINT_DIR_IN | 1)
-
-		/** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */
-		#define AUDIO_STREAM_EPSIZE           256
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t     Config;
-
-			// Audio Control Interface
-			USB_Descriptor_Interface_t                Audio_ControlInterface;
-			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
-			USB_Audio_Descriptor_InputTerminal_t      Audio_InputTerminal;
-			USB_Audio_Descriptor_OutputTerminal_t     Audio_OutputTerminal;
-
-			// Audio Streaming Interface
-			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt0;
-			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt1;
-			USB_Audio_Descriptor_Interface_AS_t       Audio_StreamInterface_SPC;
-			USB_Audio_Descriptor_Format_t             Audio_AudioFormat;
-			USB_Audio_SampleFreq_t                    Audio_AudioFormatSampleRates[5];
-			USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint;
-			USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
-			INTERFACE_ID_AudioStream  = 1, /**< Audio stream interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/asf.xml
deleted file mode 100644
index 466de73033..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/asf.xml
+++ /dev/null
@@ -1,52 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Audio Input Device Demo (Class Driver APIs)" id="lufa.demos.device.class.audio_input.example.avr8">

-		<require idref="lufa.demos.device.class.audio_input"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.audio_input" caption="Audio Input Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Audio 1.0 Input device demo, implementing a basic USB microphone. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="Audio Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="AudioInput.txt"/>

-

-		<build type="c-source" value="AudioInput.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="AudioInput.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.adc"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/doxyfile
deleted file mode 100644
index a3181cf7ed..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Audio Input Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/makefile
deleted file mode 100644
index 3ad52565ff..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioInput/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = AudioInput
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
deleted file mode 100644
index dddcf67bd2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the AudioOutput demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "AudioOutput.h"
-
-/** LUFA Audio Class driver interface configuration and state information. This structure is
- *  passed to all Audio Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_Audio_Device_t Speaker_Audio_Interface =
-	{
-		.Config =
-			{
-				.ControlInterfaceNumber   = INTERFACE_ID_AudioControl,
-				.StreamingInterfaceNumber = INTERFACE_ID_AudioStream,
-				.DataOUTEndpoint          =
-					{
-						.Address          = AUDIO_STREAM_EPADDR,
-						.Size             = AUDIO_STREAM_EPSIZE,
-						.Banks            = 2,
-					},
-			},
-	};
-
-/** Current audio sampling frequency of the streaming audio endpoint. */
-static uint32_t CurrentAudioSampleFrequency = 48000;
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		Audio_Device_USBTask(&Speaker_Audio_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	USB_Init();
-}
-
-/** ISR to handle the reloading of the PWM timer with the next sample. */
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)
-{
-	uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
-
-	/* Check that the USB bus is ready for the next sample to read */
-	if (Audio_Device_IsSampleReceived(&Speaker_Audio_Interface))
-	{
-		/* Retrieve the signed 16-bit left and right audio samples, convert to 8-bit */
-		int8_t LeftSample_8Bit  = (Audio_Device_ReadSample16(&Speaker_Audio_Interface) >> 8);
-		int8_t RightSample_8Bit = (Audio_Device_ReadSample16(&Speaker_Audio_Interface) >> 8);
-
-		/* Mix the two channels together to produce a mono, 8-bit sample */
-		int8_t MixedSample_8Bit = (((int16_t)LeftSample_8Bit + (int16_t)RightSample_8Bit) >> 1);
-
-		#if defined(AUDIO_OUT_MONO)
-		/* Load the sample into the PWM timer channel */
-		OCR3A = (MixedSample_8Bit ^ (1 << 7));
-		#elif defined(AUDIO_OUT_STEREO)
-		/* Load the dual 8-bit samples into the PWM timer channels */
-		OCR3A = (LeftSample_8Bit  ^ (1 << 7));
-		OCR3B = (RightSample_8Bit ^ (1 << 7));
-		#elif defined(AUDIO_OUT_PORTC)
-		/* Load the 8-bit mixed sample into PORTC */
-		PORTC = MixedSample_8Bit;
-		#endif
-
-		uint8_t LEDMask = LEDS_NO_LEDS;
-
-		/* Turn on LEDs as the sample amplitude increases */
-		if (MixedSample_8Bit > 16)
-		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4);
-		else if (MixedSample_8Bit > 8)
-		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3);
-		else if (MixedSample_8Bit > 4)
-		  LEDMask = (LEDS_LED1 | LEDS_LED2);
-		else if (MixedSample_8Bit > 2)
-		  LEDMask = (LEDS_LED1);
-
-		LEDs_SetAllLEDs(LEDMask);
-	}
-
-	Endpoint_SelectEndpoint(PrevEndpoint);
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	/* Sample reload timer initialization */
-	TIMSK0  = (1 << OCIE0A);
-	OCR0A   = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
-	TCCR0A  = (1 << WGM01);  // CTC mode
-	TCCR0B  = (1 << CS01);   // Fcpu/8 speed
-
-	#if defined(AUDIO_OUT_MONO)
-	/* Set speaker as output */
-	DDRC   |= (1 << 6);
-	#elif defined(AUDIO_OUT_STEREO)
-	/* Set speakers as outputs */
-	DDRC   |= ((1 << 6) | (1 << 5));
-	#elif defined(AUDIO_OUT_PORTC)
-	/* Set PORTC as outputs */
-	DDRC   |= 0xFF;
-	#endif
-
-	#if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO))
-	/* PWM speaker timer initialization */
-	TCCR3A  = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)
-	        | (1 << COM3B1) | (1 << COM3B0)); // Set on match, clear on TOP
-	TCCR3B  = ((1 << WGM32) | (1 << CS30));  // Fast 8-Bit PWM, F_CPU speed
-	#endif
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-
-	/* Stop the sample reload timer */
-	TCCR0B = 0;
-
-	#if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO))
-	/* Stop the PWM generation timer */
-	TCCR3B = 0;
-	#endif
-
-	#if defined(AUDIO_OUT_MONO)
-	/* Set speaker as input to reduce current draw */
-	DDRC  &= ~(1 << 6);
-	#elif defined(AUDIO_OUT_STEREO)
-	/* Set speakers as inputs to reduce current draw */
-	DDRC  &= ~((1 << 6) | (1 << 5));
-	#elif defined(AUDIO_OUT_PORTC)
-	/* Set PORTC low */
-	PORTC = 0x00;
-	#endif
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= Audio_Device_ConfigureEndpoints(&Speaker_Audio_Interface);
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	Audio_Device_ProcessControlRequest(&Speaker_Audio_Interface);
-}
-
-/** Audio class driver callback for the setting and retrieval of streaming endpoint properties. This callback must be implemented
- *  in the user application to handle property manipulations on streaming audio endpoints.
- *
- *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
- *  the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
- *  to indicate the size of the retrieved data.
- *
- *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
- *        of the \c DataLength parameter.
- *
- *  \param[in,out] AudioInterfaceInfo  Pointer to a structure containing an Audio Class configuration and state.
- *  \param[in]     EndpointProperty    Property of the endpoint to get or set, a value from Audio_ClassRequests_t.
- *  \param[in]     EndpointAddress     Address of the streaming endpoint whose property is being referenced.
- *  \param[in]     EndpointControl     Parameter of the endpoint to get or set, a value from Audio_EndpointControls_t.
- *  \param[in,out] DataLength          For SET operations, the length of the parameter data to set. For GET operations, the maximum
- *                                     length of the retrieved data. When NULL, the function should return whether the given property
- *                                     and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
- *  \param[in,out] Data                Pointer to a location where the parameter data is stored for SET operations, or where
- *                                     the retrieved data is to be stored for GET operations.
- *
- *  \return Boolean \c true if the property get/set was successful, \c false otherwise
- */
-bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
-                                                  const uint8_t EndpointProperty,
-                                                  const uint8_t EndpointAddress,
-                                                  const uint8_t EndpointControl,
-                                                  uint16_t* const DataLength,
-                                                  uint8_t* Data)
-{
-	/* Check the requested endpoint to see if a supported endpoint is being manipulated */
-	if (EndpointAddress == Speaker_Audio_Interface.Config.DataOUTEndpoint.Address)
-	{
-		/* Check the requested control to see if a supported control is being manipulated */
-		if (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)
-		{
-			switch (EndpointProperty)
-			{
-				case AUDIO_REQ_SetCurrent:
-					/* Check if we are just testing for a valid property, or actually adjusting it */
-					if (DataLength != NULL)
-					{
-						/* Set the new sampling frequency to the value given by the host */
-						CurrentAudioSampleFrequency = (((uint32_t)Data[2] << 16) | ((uint32_t)Data[1] << 8) | (uint32_t)Data[0]);
-
-						/* Adjust sample reload timer to the new frequency */
-						OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
-					}
-
-					return true;
-				case AUDIO_REQ_GetCurrent:
-					/* Check if we are just testing for a valid property, or actually reading it */
-					if (DataLength != NULL)
-					{
-						*DataLength = 3;
-
-						Data[2] = (CurrentAudioSampleFrequency >> 16);
-						Data[1] = (CurrentAudioSampleFrequency >> 8);
-						Data[0] = (CurrentAudioSampleFrequency &  0xFF);
-					}
-
-					return true;
-			}
-		}
-	}
-
-	return false;
-}
-
-/** Audio class driver callback for the setting and retrieval of streaming interface properties. This callback must be implemented
- *  in the user application to handle property manipulations on streaming audio interfaces.
- *
- *  When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
- *  the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations
- *  to indicate the size of the retrieved data.
- *
- *  \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
- *        of the \c DataLength parameter.
- *
- *  \param[in,out] AudioInterfaceInfo  Pointer to a structure containing an Audio Class configuration and state.
- *  \param[in]     Property            Property of the interface to get or set, a value from Audio_ClassRequests_t.
- *  \param[in]     EntityAddress       Address of the audio entity whose property is being referenced.
- *  \param[in]     Parameter           Parameter of the entity to get or set, specific to each type of entity (see USB Audio specification).
- *  \param[in,out] DataLength          For SET operations, the length of the parameter data to set. For GET operations, the maximum
- *                                     length of the retrieved data. When NULL, the function should return whether the given property
- *                                     and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
- *  \param[in,out] Data                Pointer to a location where the parameter data is stored for SET operations, or where
- *                                     the retrieved data is to be stored for GET operations.
- *
- *  \return Boolean \c true if the property GET/SET was successful, \c false otherwise
- */
-bool CALLBACK_Audio_Device_GetSetInterfaceProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
-                                                   const uint8_t Property,
-                                                   const uint8_t EntityAddress,
-                                                   const uint16_t Parameter,
-                                                   uint16_t* const DataLength,
-                                                   uint8_t* Data)
-{
-	/* No audio interface entities in the device descriptor, thus no properties to get or set. */
-	return false;
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h
deleted file mode 100644
index 671552f49d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for AudioOutput.c.
- */
-
-#ifndef _AUDIO_OUTPUT_H_
-#define _AUDIO_OUTPUT_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdlib.h>
-
-		#include "Descriptors.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-		bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
-		                                                  const uint8_t EndpointProperty,
-		                                                  const uint8_t EndpointAddress,
-		                                                  const uint8_t EndpointControl,
-		                                                  uint16_t* const DataLength,
-		                                                  uint8_t* Data) ATTR_NON_NULL_PTR_ARG(1);
-		bool CALLBACK_Audio_Device_GetSetInterfaceProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
-		                                                   const uint8_t Property,
-		                                                   const uint8_t EntityAddress,
-		                                                   const uint16_t Parameter,
-		                                                   uint16_t* const DataLength,
-		                                                   uint8_t* Data);
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt
deleted file mode 100644
index 8f0c7d656c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Audio Output Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Standard Audio Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Audio 1.0 Class Specification \n
- *        USBIF Audio 1.0 Class Terminal Types Specification \n
- *        USBIF Audio 1.0 Data Formats Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Audio demonstration application. This gives a simple reference
- *  application for implementing a USB Audio Output device using the
- *  basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers
- *  required).
- *
- *  On start-up the system will automatically enumerate and function
- *  as a USB speaker. Outgoing audio will output in 8-bit PWM onto
- *  the timer 3 output compare channel A for AUDIO_OUT_MONO mode, on
- *  timer 3 channels A and B for AUDIO_OUT_STEREO and on PORTC as a signed
- *  mono sample for AUDIO_OUT_PORTC. Audio output will also be indicated on
- *  the board LEDs in all modes. Decouple audio outputs with a capacitor and
- *  attach to a speaker to hear the audio.
- *
- *  Under Windows, if a driver request dialogue pops up, select the option
- *  to automatically install the appropriate drivers.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>AUDIO_OUT_STEREO</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller.</td>
- *   </tr>
- *   <tr>
- *    <td>AUDIO_OUT_MONO</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller.</td>
- *   </tr>
- *   <tr>
- *    <td>AUDIO_OUT_PORTC</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an
- *        external DAC.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/Config/AppConfig.h
deleted file mode 100644
index e6684a611d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/Config/AppConfig.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define AUDIO_OUT_STEREO
-//	#define AUDIO_OUT_MONO
-//	#define AUDIO_OUT_PORTC
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/Config/LUFAConfig.h
deleted file mode 100644
index 796221604d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/Descriptors.c
deleted file mode 100644
index 4d68e89de8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/Descriptors.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(2,0,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2046,
-	.ReleaseNumber          = VERSION_BCD(0,0,2),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces          = 2,
-
-			.ConfigurationNumber      = 1,
-			.ConfigurationStrIndex    = NO_DESCRIPTOR,
-
-			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
-		},
-
-	.Audio_ControlInterface =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioControl,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 0,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_ControlSubclass,
-			.Protocol                 = AUDIO_CSCP_ControlProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_ControlInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
-
-			.ACSpecification          = VERSION_BCD(1,0,0),
-			.TotalLength              = (sizeof(USB_Audio_Descriptor_Interface_AC_t) +
-			                             sizeof(USB_Audio_Descriptor_InputTerminal_t) +
-			                             sizeof(USB_Audio_Descriptor_OutputTerminal_t)),
-
-			.InCollection             = 1,
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-		},
-
-	.Audio_InputTerminal =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
-
-			.TerminalID               = 0x01,
-			.TerminalType             = AUDIO_TERMINAL_STREAMING,
-			.AssociatedOutputTerminal = 0x00,
-
-			.TotalChannels            = 2,
-			.ChannelConfig            = (AUDIO_CHANNEL_LEFT_FRONT | AUDIO_CHANNEL_RIGHT_FRONT),
-
-			.ChannelStrIndex          = NO_DESCRIPTOR,
-			.TerminalStrIndex         = NO_DESCRIPTOR
-		},
-
-	.Audio_OutputTerminal =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
-
-			.TerminalID               = 0x02,
-			.TerminalType             = AUDIO_TERMINAL_OUT_SPEAKER,
-			.AssociatedInputTerminal  = 0x00,
-
-			.SourceID                 = 0x01,
-
-			.TerminalStrIndex         = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_Alt0 =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 0,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
-			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_Alt1 =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-			.AlternateSetting         = 1,
-
-			.TotalEndpoints           = 1,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
-			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
-
-			.TerminalLink             = 0x01,
-
-			.FrameDelay               = 1,
-			.AudioFormat              = 0x0001
-		},
-
-	.Audio_AudioFormat =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Format_t) +
-			                                     sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates),
-			                             .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_FormatType,
-
-			.FormatType               = 0x01,
-			.Channels                 = 0x02,
-
-			.SubFrameSize             = 0x02,
-			.BitResolution            = 16,
-
-			.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t)),
-		},
-
-	.Audio_AudioFormatSampleRates =
-		{
-			AUDIO_SAMPLE_FREQ(8000),
-			AUDIO_SAMPLE_FREQ(11025),
-			AUDIO_SAMPLE_FREQ(22050),
-			AUDIO_SAMPLE_FREQ(44100),
-			AUDIO_SAMPLE_FREQ(48000),
-		},
-
-	.Audio_StreamEndpoint =
-		{
-			.Endpoint =
-				{
-					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
-
-					.EndpointAddress     = AUDIO_STREAM_EPADDR,
-					.Attributes          = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
-					.EndpointSize        = AUDIO_STREAM_EPSIZE,
-					.PollingIntervalMS   = 0x01
-				},
-
-			.Refresh                  = 0,
-			.SyncEndpointNumber       = 0
-		},
-
-	.Audio_StreamEndpoint_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint},
-			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
-
-			.Attributes               = (AUDIO_EP_ACCEPTS_SMALL_PACKETS | AUDIO_EP_SAMPLE_FREQ_CONTROL),
-
-			.LockDelayUnits           = 0x00,
-			.LockDelay                = 0x0000
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Audio Out Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/Descriptors.h
deleted file mode 100644
index 58cf0c55c8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/Descriptors.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the Audio isochronous streaming data OUT endpoint. */
-		#define AUDIO_STREAM_EPADDR           (ENDPOINT_DIR_OUT | 1)
-
-		/** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */
-		#define AUDIO_STREAM_EPSIZE           256
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t     Config;
-
-			// Audio Control Interface
-			USB_Descriptor_Interface_t                Audio_ControlInterface;
-			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
-			USB_Audio_Descriptor_InputTerminal_t      Audio_InputTerminal;
-			USB_Audio_Descriptor_OutputTerminal_t     Audio_OutputTerminal;
-
-			// Audio Streaming Interface
-			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt0;
-			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt1;
-			USB_Audio_Descriptor_Interface_AS_t       Audio_StreamInterface_SPC;
-			USB_Audio_Descriptor_Format_t             Audio_AudioFormat;
-			USB_Audio_SampleFreq_t                    Audio_AudioFormatSampleRates[5];
-			USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint;
-			USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
-			INTERFACE_ID_AudioStream  = 1, /**< Audio stream interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/asf.xml
deleted file mode 100644
index f46f3a0f19..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/asf.xml
+++ /dev/null
@@ -1,50 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Audio Output Device Demo (Class Driver APIs)" id="lufa.demos.device.class.audio_output.example.avr8">

-		<require idref="lufa.demos.device.class.audio_output"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.audio_output" caption="Audio Output Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Audio 1.0 Output device demo, implementing a basic USB speaker. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="Audio Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="AudioOutput.txt"/>

-

-		<build type="c-source" value="AudioOutput.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="AudioOutput.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/doxyfile
deleted file mode 100644
index 03c33a2d4f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Audio Output Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = YES
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/makefile
deleted file mode 100644
index 32d73c9d26..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/AudioOutput/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = AudioOutput
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/Config/LUFAConfig.h
deleted file mode 100644
index a06b60275c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               2
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/Descriptors.c
deleted file mode 100644
index 27bd67cddd..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/Descriptors.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x206D,
-	.ReleaseNumber          = VERSION_BCD(0,0,2),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces          = 2,
-
-			.ConfigurationNumber      = 1,
-			.ConfigurationStrIndex    = NO_DESCRIPTOR,
-
-			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
-		},
-
-	.Audio_ControlInterface =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioControl,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 0,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_ControlSubclass,
-			.Protocol                 = AUDIO_CSCP_ControlProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_ControlInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
-
-			.ACSpecification          = VERSION_BCD(1,0,0),
-			.TotalLength              = sizeof(USB_Audio_Descriptor_Interface_AC_t),
-
-			.InCollection             = 1,
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-		},
-
-	.Audio_StreamInterface =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 2,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_MIDIStreamingSubclass,
-			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_AudioInterface_AS_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
-
-			.AudioSpecification       = VERSION_BCD(1,0,0),
-
-			.TotalLength              = (sizeof(USB_Descriptor_Configuration_t) -
-			                             offsetof(USB_Descriptor_Configuration_t, Audio_StreamInterface_SPC))
-		},
-
-	.MIDI_In_Jack_Emb =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_Embedded,
-			.JackID                   = 0x01,
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_In_Jack_Emb2 =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_Embedded,
-			.JackID                   = 0x02,
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_In_Jack_Ext =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_External,
-			.JackID                   = 0x03,
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_In_Jack_Ext2 =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_External,
-			.JackID                   = 0x04,
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_Out_Jack_Emb =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_Embedded,
-			.JackID                   = 0x05,
-
-			.NumberOfPins             = 1,
-			.SourceJackID             = {0x03},
-			.SourcePinID              = {0x01},
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_Out_Jack_Emb2 =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_Embedded,
-			.JackID                   = 0x06,
-
-			.NumberOfPins             = 1,
-			.SourceJackID             = {0x04},
-			.SourcePinID              = {0x01},
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_Out_Jack_Ext =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_External,
-			.JackID                   = 0x07,
-
-			.NumberOfPins             = 1,
-			.SourceJackID             = {0x01},
-			.SourcePinID              = {0x01},
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_Out_Jack_Ext2 =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_External,
-			.JackID                   = 0x08,
-
-			.NumberOfPins             = 1,
-			.SourceJackID             = {0x02},
-			.SourcePinID              = {0x01},
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_In_Jack_Endpoint =
-		{
-			.Endpoint =
-				{
-					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
-
-					.EndpointAddress     = MIDI_STREAM_OUT_EPADDR,
-					.Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-					.EndpointSize        = MIDI_STREAM_EPSIZE,
-					.PollingIntervalMS   = 0x05
-				},
-
-			.Refresh                  = 0,
-			.SyncEndpointNumber       = 0
-		},
-
-	.MIDI_In_Jack_Endpoint_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_DualJack_Endpoint_t), .Type = DTYPE_CSEndpoint},
-			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
-
-			.TotalEmbeddedJacks       = 0x02,
-			.AssociatedJackID         = {0x01, 0x02}
-		},
-
-	.MIDI_Out_Jack_Endpoint =
-		{
-			.Endpoint =
-				{
-					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
-
-					.EndpointAddress     = MIDI_STREAM_IN_EPADDR,
-					.Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-					.EndpointSize        = MIDI_STREAM_EPSIZE,
-					.PollingIntervalMS   = 0x05
-				},
-
-			.Refresh                  = 0,
-			.SyncEndpointNumber       = 0
-		},
-
-	.MIDI_Out_Jack_Endpoint_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_DualJack_Endpoint_t), .Type = DTYPE_CSEndpoint},
-			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
-
-			.TotalEmbeddedJacks       = 0x02,
-			.AssociatedJackID         = {0x05, 0x06}
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Dual MIDI Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/Descriptors.h
deleted file mode 100644
index 8164bfc930..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/Descriptors.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-	/* Macros: */
-		/** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */
-		#define MIDI_STREAM_IN_EPADDR       (ENDPOINT_DIR_IN  | 2)
-
-		/** Endpoint address of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */
-		#define MIDI_STREAM_OUT_EPADDR      (ENDPOINT_DIR_OUT | 1)
-
-		/** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */
-		#define MIDI_STREAM_EPSIZE          64
-
-	/* Type Defines: */
- 		/** Type define for a dual jack endpoint descriptor. This is identical to the LUFA MIDI class driver's
- 		 *  USB_MIDI_Descriptor_Jack_Endpoint_t, except that it contains two jack association entries.
- 		 */
-		typedef struct
-		{
-			USB_Descriptor_Header_t   Header; /**< Regular descriptor header containing the descriptor's type and length. */
-			uint8_t                   Subtype; /**< Sub type value used to distinguish between audio class-specific descriptors. */
-
-			uint8_t                   TotalEmbeddedJacks; /**< Total number of jacks inside this endpoint. */
-			uint8_t                   AssociatedJackID[2]; /**< IDs of each jack inside the endpoint. */
-		} ATTR_PACKED USB_MIDI_Descriptor_DualJack_Endpoint_t;
-
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t     Config;
-
-			// MIDI Audio Control Interface
-			USB_Descriptor_Interface_t                Audio_ControlInterface;
-			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
-
-			// MIDI Audio Streaming Interface
-			USB_Descriptor_Interface_t                Audio_StreamInterface;
-			USB_MIDI_Descriptor_AudioInterface_AS_t   Audio_StreamInterface_SPC;
-			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Emb;
-			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Emb2;
-			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Ext;
-			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Ext2;
-			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Emb;
-			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Emb2;
-			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Ext;
-			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Ext2;
-			USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_In_Jack_Endpoint;
-			USB_MIDI_Descriptor_DualJack_Endpoint_t   MIDI_In_Jack_Endpoint_SPC;
-			USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_Out_Jack_Endpoint;
-			USB_MIDI_Descriptor_DualJack_Endpoint_t   MIDI_Out_Jack_Endpoint_SPC;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
-			INTERFACE_ID_AudioStream  = 1, /**< Audio streaming interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/DualMIDI.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/DualMIDI.c
deleted file mode 100644
index 96d5433ee1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/DualMIDI.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the Dual MIDI demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "DualMIDI.h"
-
-/** LUFA MIDI Class driver interface configuration and state information. This structure is
- *  passed to all MIDI Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_MIDI_Device_t Keyboard_MIDI_Interface =
-	{
-		.Config =
-			{
-				.StreamingInterfaceNumber = INTERFACE_ID_AudioStream,
-				.DataINEndpoint           =
-					{
-						.Address          = MIDI_STREAM_IN_EPADDR,
-						.Size             = MIDI_STREAM_EPSIZE,
-						.Banks            = 1,
-					},
-				.DataOUTEndpoint          =
-					{
-						.Address          = MIDI_STREAM_OUT_EPADDR,
-						.Size             = MIDI_STREAM_EPSIZE,
-						.Banks            = 1,
-					},
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		CheckJoystickMovement();
-
-		MIDI_EventPacket_t ReceivedMIDIEvent;
-		while (MIDI_Device_ReceiveEventPacket(&Keyboard_MIDI_Interface, &ReceivedMIDIEvent))
-		{
-			if ((ReceivedMIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)) && (ReceivedMIDIEvent.Data3 > 0))
-			  LEDs_SetAllLEDs(ReceivedMIDIEvent.Data2 > 64 ? LEDS_LED1 : LEDS_LED2);
-			else
-			  LEDs_SetAllLEDs(LEDS_NO_LEDS);
-		}
-
-		MIDI_Device_USBTask(&Keyboard_MIDI_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	Buttons_Init();
-	USB_Init();
-}
-
-/** Checks for changes in the position of the board joystick, sending MIDI events to the host upon each change. */
-void CheckJoystickMovement(void)
-{
-	static uint8_t PrevJoystickStatus;
-
-	uint8_t MIDICommand = 0;
-	uint8_t MIDIPitch;
-
-	/* Get current joystick mask, XOR with previous to detect joystick changes */
-	uint8_t JoystickStatus  = Joystick_GetStatus();
-	uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);
-
-	/* Get board button status - if pressed use second virtual cable, otherwise use the first */
-	uint8_t VirtualCable = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? 1 : 0;
-
-	if (JoystickChanges & JOY_LEFT)
-	{
-		MIDICommand = ((JoystickStatus & JOY_LEFT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3C;
-	}
-
-	if (JoystickChanges & JOY_UP)
-	{
-		MIDICommand = ((JoystickStatus & JOY_UP)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3D;
-	}
-
-	if (JoystickChanges & JOY_RIGHT)
-	{
-		MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3E;
-	}
-
-	if (JoystickChanges & JOY_DOWN)
-	{
-		MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3F;
-	}
-
-	if (JoystickChanges & JOY_PRESS)
-	{
-		MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3B;
-	}
-
-	if (MIDICommand)
-	{
-		MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
-			{
-				.Event       = MIDI_EVENT(VirtualCable, MIDICommand),
-
-				.Data1       = MIDICommand | MIDI_CHANNEL(1),
-				.Data2       = MIDIPitch,
-				.Data3       = MIDI_STANDARD_VELOCITY,
-			};
-
-		MIDI_Device_SendEventPacket(&Keyboard_MIDI_Interface, &MIDIEvent);
-		MIDI_Device_Flush(&Keyboard_MIDI_Interface);
-	}
-
-	PrevJoystickStatus = JoystickStatus;
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= MIDI_Device_ConfigureEndpoints(&Keyboard_MIDI_Interface);
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	MIDI_Device_ProcessControlRequest(&Keyboard_MIDI_Interface);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/DualMIDI.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/DualMIDI.h
deleted file mode 100644
index a4a1d6221d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/DualMIDI.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DualMIDI.c.
- */
-
-#ifndef _DUAL_MIDI_H_
-#define _DUAL_MIDI_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void CheckJoystickMovement(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/DualMIDI.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/DualMIDI.txt
deleted file mode 100644
index e5d8c26be0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/DualMIDI.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage MIDI Dual Input Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Standard Audio Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Audio Class Specification \n
- *        USB-MIDI Audio Class Extension Specification \n
- *        General MIDI Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Dual MIDI demonstration application. This gives a simple reference
- *  application for implementing the USB-MIDI class in USB devices.
- *  It is built upon the USB Audio class.
- *
- *  Joystick movements are translated into note on/off messages and
- *  are sent to the host PC as MIDI streams which can be read by any
- *  MIDI program supporting MIDI IN devices.
- *
- *  If the HWB is not pressed, the first virtual MIDI cable to the host is
- *  used. If the HWB is pressed, then the second virtual cable is selected.
- *
- *  This device implements MIDI-THRU mode, with the IN MIDI data being
- *  generated by the device itself. OUT MIDI data is discarded.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/asf.xml
deleted file mode 100644
index ba85a3b56b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/asf.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<asf xmlversion="1.0">
-	<project caption="Dual MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_midi.example.avr8">
-		<require idref="lufa.demos.device.class.dual_midi"/>
-		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
-
-		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
-
-		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
-
-	<project caption="MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_midi.example.xmega">
-		<require idref="lufa.demos.device.class.dual_midi"/>
-		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
-
-		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
-
-		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
-
-	<module type="application" id="lufa.demos.device.class.dual_midi" caption="Dual MIDI Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
-		Dual MIDI device demo, implementing a basic USB MIDI device with two virtual cables that can send messages to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
-
- 		<info type="gui-flag" value="move-to-root"/>
-
-		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
-			<keyword value="MIDI Class"/>
-		</info>
-
-		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
-
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="DualMIDI.txt"/>
-
-		<build type="c-source" value="DualMIDI.c"/>
-		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="DualMIDI.h"/>
-		<build type="header-file" value="Descriptors.h"/>
-
-		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
-
-		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
-		<require idref="lufa.drivers.board.joystick"/>
-	</module>
-</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/doxyfile
deleted file mode 100644
index adf3fbd8de..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Dual MIDI Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/makefile
deleted file mode 100644
index c7534be4ba..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualMIDI/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = DualMIDI
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/Config/LUFAConfig.h
deleted file mode 100644
index 39b5236fec..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               6
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c
deleted file mode 100644
index 9952ed92cf..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_IADDeviceClass,
-	.SubClass               = USB_CSCP_IADDeviceSubclass,
-	.Protocol               = USB_CSCP_IADDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x204E,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 4,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.CDC1_IAD =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
-
-			.FirstInterfaceIndex    = INTERFACE_ID_CDC1_CCI,
-			.TotalInterfaces        = 2,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.IADStrIndex            = NO_DESCRIPTOR
-		},
-
-	.CDC1_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC1_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC1_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC1_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x06,
-		},
-
-	.CDC1_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC1_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC1_DCI,
-		},
-
-	.CDC1_ManagementEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC1_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC1_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC1_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC1_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC1_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC1_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC1_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC2_IAD =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
-
-			.FirstInterfaceIndex    = INTERFACE_ID_CDC2_CCI,
-			.TotalInterfaces        = 2,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.IADStrIndex            = NO_DESCRIPTOR
-		},
-
-	.CDC2_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC2_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC2_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC2_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x06,
-		},
-
-	.CDC2_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC2_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC2_DCI,
-		},
-
-	.CDC2_ManagementEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC2_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC2_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC2_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC2_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC2_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC2_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC2_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Dual CDC Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h
deleted file mode 100644
index 53f66ae414..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Macros: */
-		/** Endpoint address of the first CDC interface's device-to-host data IN endpoint. */
-		#define CDC1_TX_EPADDR                 (ENDPOINT_DIR_IN  | 1)
-
-		/** Endpoint address of the first CDC interface's host-to-device data OUT endpoint. */
-		#define CDC1_RX_EPADDR                 (ENDPOINT_DIR_OUT | 2)
-
-		/** Endpoint address of the first CDC interface's device-to-host notification IN endpoint. */
-		#define CDC1_NOTIFICATION_EPADDR       (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the second CDC interface's device-to-host data IN endpoint. */
-		#define CDC2_TX_EPADDR                 (ENDPOINT_DIR_IN  | 4)
-
-		/** Endpoint address of the second CDC interface's host-to-device data OUT endpoint. */
-		#define CDC2_RX_EPADDR                 (ENDPOINT_DIR_OUT | 5)
-
-		/** Endpoint address of the second CDC interface's device-to-host notification IN endpoint. */
-		#define CDC2_NOTIFICATION_EPADDR       (ENDPOINT_DIR_IN  | 6)
-
-		/** Size in bytes of the CDC device-to-host notification IN endpoints. */
-		#define CDC_NOTIFICATION_EPSIZE        8
-
-		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                16
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t    Config;
-
-			// First CDC Control Interface
-			USB_Descriptor_Interface_Association_t   CDC1_IAD;
-			USB_Descriptor_Interface_t               CDC1_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t    CDC1_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t       CDC1_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t     CDC1_Functional_Union;
-			USB_Descriptor_Endpoint_t                CDC1_ManagementEndpoint;
-
-			// First CDC Data Interface
-			USB_Descriptor_Interface_t               CDC1_DCI_Interface;
-			USB_Descriptor_Endpoint_t                CDC1_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t                CDC1_DataInEndpoint;
-
-			// Second CDC Control Interface
-			USB_Descriptor_Interface_Association_t   CDC2_IAD;
-			USB_Descriptor_Interface_t               CDC2_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t    CDC2_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t       CDC2_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t     CDC2_Functional_Union;
-			USB_Descriptor_Endpoint_t                CDC2_ManagementEndpoint;
-
-			// Second CDC Data Interface
-			USB_Descriptor_Interface_t               CDC2_DCI_Interface;
-			USB_Descriptor_Endpoint_t                CDC2_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t                CDC2_DataInEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_CDC1_CCI = 0, /**< CDC1 CCI interface descriptor ID */
-			INTERFACE_ID_CDC1_DCI = 1, /**< CDC1 DCI interface descriptor ID */
-			INTERFACE_ID_CDC2_CCI = 2, /**< CDC2 CCI interface descriptor ID */
-			INTERFACE_ID_CDC2_DCI = 3, /**< CDC2 DCI interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c
deleted file mode 100644
index e486538971..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the DualVirtualSerial demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "DualVirtualSerial.h"
-
-/** LUFA CDC Class driver interface configuration and state information. This structure is
- *  passed to all CDC Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another. This is for the first CDC interface,
- *  which sends strings to the host for each joystick movement.
- */
-USB_ClassInfo_CDC_Device_t VirtualSerial1_CDC_Interface =
-	{
-		.Config =
-			{
-				.ControlInterfaceNumber   = INTERFACE_ID_CDC1_CCI,
-				.DataINEndpoint           =
-					{
-						.Address          = CDC1_TX_EPADDR,
-						.Size             = CDC_TXRX_EPSIZE,
-						.Banks            = 1,
-					},
-				.DataOUTEndpoint =
-					{
-						.Address          = CDC1_RX_EPADDR,
-						.Size             = CDC_TXRX_EPSIZE,
-						.Banks            = 1,
-					},
-				.NotificationEndpoint =
-					{
-						.Address          = CDC1_NOTIFICATION_EPADDR,
-						.Size             = CDC_NOTIFICATION_EPSIZE,
-						.Banks            = 1,
-					},
-			},
-	};
-
-/** LUFA CDC Class driver interface configuration and state information. This structure is
- *  passed to all CDC Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another. This is for the second CDC interface,
- *  which echos back all received data from the host.
- */
-USB_ClassInfo_CDC_Device_t VirtualSerial2_CDC_Interface =
-	{
-		.Config =
-			{
-				.ControlInterfaceNumber   = INTERFACE_ID_CDC2_CCI,
-				.DataINEndpoint           =
-					{
-						.Address          = CDC2_TX_EPADDR,
-						.Size             = CDC_TXRX_EPSIZE,
-						.Banks            = 1,
-					},
-				.DataOUTEndpoint =
-					{
-						.Address          = CDC2_RX_EPADDR,
-						.Size             = CDC_TXRX_EPSIZE,
-						.Banks            = 1,
-					},
-				.NotificationEndpoint =
-					{
-						.Address          = CDC2_NOTIFICATION_EPADDR,
-						.Size             = CDC_NOTIFICATION_EPSIZE,
-						.Banks            = 1,
-					},
-
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		CheckJoystickMovement();
-
-		/* Discard all received data on the first CDC interface */
-		CDC_Device_ReceiveByte(&VirtualSerial1_CDC_Interface);
-
-		/* Echo all received data on the second CDC interface */
-		int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial2_CDC_Interface);
-		if (!(ReceivedByte < 0))
-		  CDC_Device_SendByte(&VirtualSerial2_CDC_Interface, (uint8_t)ReceivedByte);
-
-		CDC_Device_USBTask(&VirtualSerial1_CDC_Interface);
-		CDC_Device_USBTask(&VirtualSerial2_CDC_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Checks for changes in the position of the board joystick, sending strings to the host upon each change
- *  through the first of the CDC interfaces.
- */
-void CheckJoystickMovement(void)
-{
-	uint8_t     JoyStatus_LCL = Joystick_GetStatus();
-	char*       ReportString  = NULL;
-	static bool ActionSent = false;
-
-	if (JoyStatus_LCL & JOY_UP)
-	  ReportString = "Joystick Up\r\n";
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  ReportString = "Joystick Down\r\n";
-	else if (JoyStatus_LCL & JOY_LEFT)
-	  ReportString = "Joystick Left\r\n";
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  ReportString = "Joystick Right\r\n";
-	else if (JoyStatus_LCL & JOY_PRESS)
-	  ReportString = "Joystick Pressed\r\n";
-	else
-	  ActionSent = false;
-
-	if ((ReportString != NULL) && (ActionSent == false))
-	{
-		ActionSent = true;
-
-		CDC_Device_SendString(&VirtualSerial1_CDC_Interface, ReportString);
-	}
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial1_CDC_Interface);
-	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial2_CDC_Interface);
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	CDC_Device_ProcessControlRequest(&VirtualSerial1_CDC_Interface);
-	CDC_Device_ProcessControlRequest(&VirtualSerial2_CDC_Interface);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h
deleted file mode 100644
index e4f5f22b18..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DualVirtualSerial.c.
- */
-
-#ifndef _DUAL_VIRTUALSERIAL_H_
-#define _DUAL_VIRTUALSERIAL_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void CheckJoystickMovement(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt
deleted file mode 100644
index 1e8d3c5317..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Dual Communications Device Class (Dual Virtual Serial Port) Device
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Interface Association Descriptor ECN \n
- *        USBIF CDC Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Dual Communications Device Class demonstration application.
- *  This gives a simple reference application for implementing
- *  a composite device with dual CDC functions acting as a pair
- *  of virtual serial ports. This demo uses Interface Association
- *  Descriptors to link together the pair of related CDC
- *  descriptors for each virtual serial port, which may not be
- *  supported in all OSes - Windows Vista is supported, as is
- *  XP (although the latter may need a hotfix to function).
- *
- *  Joystick actions are transmitted to the host as strings
- *  through the first serial port. The device does not respond to
- *  serial data sent from the host in the first serial port.
- *
- *  The second serial port echoes back data sent from the host.
- *
- *  After running this demo for the first time on a new computer,
- *  you will need to supply the .INF file located in this demo
- *  project's directory as the device's driver when running under
- *  Windows. This will enable Windows to use its inbuilt CDC drivers,
- *  negating the need for custom drivers for the device. Other
- *  Operating Systems should automatically use their own inbuilt
- *  CDC-ACM drivers.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/LUFA DualVirtualSerial.inf b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/LUFA DualVirtualSerial.inf
deleted file mode 100644
index 1a0e0248af..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/LUFA DualVirtualSerial.inf
+++ /dev/null
@@ -1,66 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-;************************************************************
-
-[DefaultInstall]
-CopyINF="LUFA DualVirtualSerial.inf"
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-DriverVer=7/1/2012,10.0.0.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
-
-[SourceDisksNames]
-
-[SourceDisksFiles]
-
-[DestinationDirs]
-DefaultDestDir=12
-
-[DriverInstall]
-Include=mdmcpq.inf
-CopyFiles=FakeModemCopyFileSection
-AddReg=DriverInstall.AddReg
-
-[DriverInstall.Services]
-Include=mdmcpq.inf
-AddService=usbser, 0x00000002, LowerFilter_Service_Inst
-
-[DriverInstall.AddReg]
-HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
-
-[DeviceList.NTx86]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
-
-[DeviceList.NTia64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGNAME="http://www.lufa-lib.org"
-DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/asf.xml
deleted file mode 100644
index e00f339954..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/asf.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Dual Virtual Serial Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_cdc.example.avr8">

-		<require idref="lufa.demos.device.class.dual_cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Dual Virtual Serial Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_cdc.example.xmega">

-		<require idref="lufa.demos.device.class.dual_cdc"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.dual_cdc" caption="Dual Virtual Serial Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Dual Virtual Serial (CDC) demo, implementing a pair of virtual serial port interfaces. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="CDC Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="DualVirtualSerial.txt"/>

-		<build type="distribute" subtype="user-file" value="LUFA DualVirtualSerial.inf"/>

-

-		<build type="c-source" value="DualVirtualSerial.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="DualVirtualSerial.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.joystick"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/doxyfile
deleted file mode 100644
index 4ed8962f9c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Dual Virtual Serial Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/makefile
deleted file mode 100644
index 41da0e940f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/DualVirtualSerial/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = DualVirtualSerial
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/Config/AppConfig.h
deleted file mode 100644
index 47b8ffef8b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/Config/AppConfig.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define GENERIC_REPORT_SIZE       8
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/Config/LUFAConfig.h
deleted file mode 100644
index c6542445da..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               1
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/Descriptors.c
deleted file mode 100644
index b070a5db3b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/Descriptors.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] =
-{
-	/* Use the HID class driver's standard Vendor HID report.
-	 *  Vendor Usage Page: 0
-	 *  Vendor Collection Usage: 1
-	 *  Vendor Report IN Usage: 2
-	 *  Vendor Report OUT Usage: 3
-	 *  Vendor Report Size: GENERIC_REPORT_SIZE
-	 */
-	HID_DESCRIPTOR_VENDOR(0x00, 0x01, 0x02, 0x03, GENERIC_REPORT_SIZE)
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x204F,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.HID_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_GenericHID,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_NonBootSubclass,
-			.Protocol               = HID_CSCP_NonBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_GenericHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(GenericReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = GENERIC_IN_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = GENERIC_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Generic HID Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_GenericHID;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case HID_DTYPE_Report:
-			Address = &GenericReport;
-			Size    = sizeof(GenericReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/Descriptors.h
deleted file mode 100644
index a4426e8ff0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/Descriptors.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Generic HID Interface
-			USB_Descriptor_Interface_t            HID_Interface;
-			USB_HID_Descriptor_HID_t              HID_GenericHID;
-			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_GenericHID = 0, /**< GenericHID interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Macros: */
-		/** Endpoint address of the Generic HID reporting IN endpoint. */
-		#define GENERIC_IN_EPADDR         (ENDPOINT_DIR_IN | 1)
-
-		/** Size in bytes of the Generic HID reporting endpoint. */
-		#define GENERIC_EPSIZE            8
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/GenericHID.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/GenericHID.c
deleted file mode 100644
index 1fb6044135..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/GenericHID.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the GenericHID demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "GenericHID.h"
-
-/** Buffer to hold the previously generated HID report, for comparison purposes inside the HID class driver. */
-static uint8_t PrevHIDReportBuffer[GENERIC_REPORT_SIZE];
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Device_t Generic_HID_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber              = INTERFACE_ID_GenericHID,
-				.ReportINEndpoint             =
-					{
-						.Address              = GENERIC_IN_EPADDR,
-						.Size                 = GENERIC_EPSIZE,
-						.Banks                = 1,
-					},
-				.PrevReportINBuffer           = PrevHIDReportBuffer,
-				.PrevReportINBufferSize       = sizeof(PrevHIDReportBuffer),
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		HID_Device_USBTask(&Generic_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Generic_HID_Interface);
-
-	USB_Device_EnableSOFEvents();
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	HID_Device_ProcessControlRequest(&Generic_HID_Interface);
-}
-
-/** Event handler for the USB device Start Of Frame event. */
-void EVENT_USB_Device_StartOfFrame(void)
-{
-	HID_Device_MillisecondElapsed(&Generic_HID_Interface);
-}
-
-/** HID class driver callback function for the creation of HID reports to the host.
- *
- *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
- *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
- *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
- *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
- *
- *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
- */
-bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                         uint8_t* const ReportID,
-                                         const uint8_t ReportType,
-                                         void* ReportData,
-                                         uint16_t* const ReportSize)
-{
-	uint8_t* Data        = (uint8_t*)ReportData;
-	uint8_t  CurrLEDMask = LEDs_GetLEDs();
-
-	Data[0] = ((CurrLEDMask & LEDS_LED1) ? 1 : 0);
-	Data[1] = ((CurrLEDMask & LEDS_LED2) ? 1 : 0);
-	Data[2] = ((CurrLEDMask & LEDS_LED3) ? 1 : 0);
-	Data[3] = ((CurrLEDMask & LEDS_LED4) ? 1 : 0);
-
-	*ReportSize = GENERIC_REPORT_SIZE;
-	return false;
-}
-
-/** HID class driver callback function for the processing of HID reports from the host.
- *
- *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in] ReportID    Report ID of the received report from the host
- *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
- *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
- *  \param[in] ReportSize  Size in bytes of the received HID report
- */
-void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                          const uint8_t ReportID,
-                                          const uint8_t ReportType,
-                                          const void* ReportData,
-                                          const uint16_t ReportSize)
-{
-	uint8_t* Data       = (uint8_t*)ReportData;
-	uint8_t  NewLEDMask = LEDS_NO_LEDS;
-
-	if (Data[0])
-	  NewLEDMask |= LEDS_LED1;
-
-	if (Data[1])
-	  NewLEDMask |= LEDS_LED2;
-
-	if (Data[2])
-	  NewLEDMask |= LEDS_LED3;
-
-	if (Data[3])
-	  NewLEDMask |= LEDS_LED4;
-
-	LEDs_SetAllLEDs(NewLEDMask);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/GenericHID.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/GenericHID.h
deleted file mode 100644
index 8e290cd3d6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/GenericHID.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for GenericHID.c.
- */
-
-#ifndef _GENERICHID_H_
-#define _GENERICHID_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                         uint8_t* const ReportID,
-		                                         const uint8_t ReportType,
-		                                         void* ReportData,
-		                                         uint16_t* const ReportSize);
-		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                          const uint8_t ReportID,
-		                                          const uint8_t ReportType,
-		                                          const void* ReportData,
-		                                          const uint16_t ReportSize);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/GenericHID.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/GenericHID.txt
deleted file mode 100644
index 649fc62ce4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/GenericHID.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Generic HID Device
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Generic HID device demonstration application. This gives a simple reference application
- *  for implementing a generic HID device, using the basic USB HID drivers in all modern
- *  OSes (i.e. no special drivers required). By default it accepts and sends up to 8 byte reports
- *  to and from a USB Host, and transmits the last sent report back to the host.
- *
- *  On start-up the system will automatically enumerate and function as a vendor HID device.
- *  When controlled by a custom HID class application, reports can be sent and received by
- *  both the standard data endpoint and control request methods defined in the HID specification.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>GENERIC_REPORT_SIZE</td>
- *    <td>AppConfig.h</td>
- *    <td>This token defines the size of the device reports, both sent and received (including report ID byte). The value
- *        must be an integer ranging from 1 to 255.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_libusb.js b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_libusb.js
deleted file mode 100755
index 4203a08e47..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_libusb.js
+++ /dev/null
@@ -1,143 +0,0 @@
-#!/usr/bin/env node
-
-//             LUFA Library
-//     Copyright (C) Dean Camera, 2014.
-//
-//  dean [at] fourwalledcubicle [dot] com
-//           www.lufa-lib.org
-
-// LUFA Generic HID device demo host test script. This script will send a
-// continuous stream of generic reports to the device, to show a variable LED
-// pattern on the target board. Send and received report data is printed to
-// the terminal.
-//
-// You have to install the usb and async modules prior to executing this script:
-// apt-get install libusb-1.0-0-dev
-// npm install usb async sprintf
-
-var usb = require('usb');
-var async = require('async');
-var sprintf = require('sprintf');
-
-var deviceVid = 0x03EB;
-var devicePid = 0x204F;
-var reportLength = 8;
-
-function getAndInitHidDeviceAndInterface()
-{
-    device = usb.findByIds(deviceVid, devicePid);
-    if (!device) {
-        console.log('No device found');
-        process.exit(1);
-    }
-    device.open();
-
-    var hidInterface = device.interface(0);
-    if (hidInterface.isKernelDriverActive()) {
-        hidInterface.detachKernelDriver();
-    }
-    hidInterface.claim();
-
-    async.series([
-        function(callback) {
-            setConfiguration(0, function(error, data) {
-                callback();
-            });
-        }
-    ]);
-
-    return {hidDevice:device, hidInterface:hidInterface};
-}
-
-function read(hidInterface, callback)
-{
-    endpoint = hidInterface.endpoints[0];
-    endpoint.transfer(reportLength, function(error, data) {
-        if (error) {
-            console.log(error)
-        } else {
-            console.log("Received LED Pattern:", data.slice(0, 4));
-        }
-        callback();
-    });
-}
-
-function write(hidDevice, message, callback)
-{
-    hidDevice.controlTransfer(    // Send a Set Report control request
-        parseInt('00100001', 2),  // bmRequestType (constant for this control request)
-        0x09,                     // bmRequest (constant for this control request)
-        0x0809,                   // wValue (MSB is report type, LSB is report number)
-        0,                        // wIndex (interface number)
-        message,                  // message to be sent
-        function(error, data) {   // callback to be executed upon finishing the transfer
-            console.log("Sent LED Pattern:", message.slice(1, 5))
-            callback();
-        }
-    );
-}
-
-function setConfiguration(configurationNumber, callback)
-{
-    device.controlTransfer(                 // Send a Set Configuration control request
-        parseInt('00000000', 2),            // bmRequestType
-        0x09,                               // bmRequest
-        0,                                  // wValue (Configuration value)
-        0,                                  // wIndex
-        new Buffer(0),                      // message to be sent
-        callback                            // callback to be executed upon finishing the transfer
-    );
-}
-
-// @TODO: Fix this function because apparently it doesn't work for some reason.
-function getStringDescriptor(stringId, languageId, callback)
-{
-    var STRING_DESCRIPTOR_TYPE = 0x03;
-    var wValue = (STRING_DESCRIPTOR_TYPE << 8) | stringId;
-
-    device.controlTransfer(       // Send a Get Descriptor control request
-        parseInt('10000000', 2),  // bmRequestType
-        0x06,                     // bmRequest
-        wValue,                   // wValue
-        languageId,               // wIndex
-        64,                       // response length
-        callback                  // callback to be executed upon finishing the transfer
-    );
-}
-
-function setNextPattern()
-{
-    var pattern = [
-        hidInterface.interface,
-        (p >> 3) & 1,
-        (p >> 2) & 1,
-        (p >> 1) & 1,
-        (p >> 0) & 1
-    ];
-
-    async.series([
-        function(callback) {
-            write(hidDevice, new Buffer(pattern), callback);
-        },
-        function(callback) {
-            read(hidInterface, callback);
-        },
-        function(callback) {
-            p = (p + 1) % 16
-            setTimeout(setNextPattern, 200);
-            callback();
-        }]);
-}
-
-var hidDeviceAndInterface = getAndInitHidDeviceAndInterface();
-var hidDevice = hidDeviceAndInterface.hidDevice
-var hidInterface = hidDeviceAndInterface.hidInterface;
-
-console.log(sprintf("Connected to device 0x%04X/0x%04X - %s [%s]",
-            hidDevice.deviceDescriptor.idVendor,
-            hidDevice.deviceDescriptor.idProduct,
-            hidDevice.deviceDescriptor.iProduct,
-            hidDevice.deviceDescriptor.iManufacturer));
-
-p = 0
-setNextPattern();
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_libusb.py b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_libusb.py
deleted file mode 100755
index b61970d7a4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_libusb.py
+++ /dev/null
@@ -1,98 +0,0 @@
-#!/usr/bin/env python
-
-"""
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-"""
-
-"""
-    LUFA Generic HID device demo host test script. This script will send a
-    continuous stream of generic reports to the device, to show a variable LED
-    pattern on the target board. Send and received report data is printed to
-    the terminal.
-
-    Requires the PyUSB library (http://sourceforge.net/apps/trac/pyusb/).
-"""
-
-import sys
-from time import sleep
-import usb.core
-import usb.util
-
-# Generic HID device VID, PID and report payload length (length is increased
-# by one to account for the Report ID byte that must be pre-pended)
-device_vid = 0x03EB
-device_pid = 0x204F
-
-def get_and_init_hid_device():
-    device = usb.core.find(idVendor=device_vid, idProduct=device_pid)
-
-    if device is None:
-        sys.exit("Could not find USB device.")
-
-    if device.is_kernel_driver_active(0):
-        try:
-            device.detach_kernel_driver(0)
-        except usb.core.USBError as exception:
-            sys.exit("Could not detatch kernel driver: %s" % str(exception))
-
-    try:
-        device.set_configuration()
-    except usb.core.USBError as exception:
-        sys.exit("Could not set configuration: %s" % str(exception))
-
-    return device
-
-def send_led_pattern(device, led1, led2, led3, led4):
-    # Report data for the demo is LED on/off data
-    report_data = [led1, led2, led3, led4]
-
-    # Send the generated report to the device
-    number_of_bytes_written = device.ctrl_transfer(  # Set Report control request
-        0b00100001,  # bmRequestType (constant for this control request)
-        0x09,        # bmRequest (constant for this control request)
-        0,           # wValue (MSB is report type, LSB is report number)
-        0,           # wIndex (interface number)
-        report_data  # report data to be sent
-    );
-    assert number_of_bytes_written == len(report_data)
-
-    print("Sent LED Pattern: {0}".format(report_data))
-
-def receive_led_pattern(hid_device):
-    endpoint = hid_device[0][(0,0)][0]
-    report_data = hid_device.read(endpoint.bEndpointAddress, endpoint.wMaxPacketSize)
-    return list(report_data)
-
-def main():
-    hid_device = get_and_init_hid_device()
-
-    print("Connected to device 0x%04X/0x%04X - %s [%s]" %
-          (hid_device.idVendor, hid_device.idProduct,
-           usb.util.get_string(hid_device, 256, hid_device.iProduct),
-           usb.util.get_string(hid_device, 256, hid_device.iManufacturer)))
-
-    p = 0
-    while (True):
-        # Convert the current pattern index to a bit-mask and send
-        send_led_pattern(hid_device,
-                         (p >> 3) & 1,
-                         (p >> 2) & 1,
-                         (p >> 1) & 1,
-                         (p >> 0) & 1)
-
-        # Receive and print the current LED pattern
-        led_pattern = receive_led_pattern(hid_device)[0:4]
-        print("Received LED Pattern: {0}".format(led_pattern))
-
-        # Compute next LED pattern in sequence
-        p = (p + 1) % 16
-
-        # Delay a bit for visual effect
-        sleep(.2)
-
-if __name__ == '__main__':
-    main()
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_winusb.py b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_winusb.py
deleted file mode 100644
index 2865772804..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/HostTestApp/test_generic_hid_winusb.py
+++ /dev/null
@@ -1,96 +0,0 @@
-"""
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-"""
-
-"""
-    LUFA Generic HID device demo host test script. This script will send a
-    continuous stream of generic reports to the device, to show a variable LED
-    pattern on the target board. Send and received report data is printed to
-    the terminal.
-
-    Requires the pywinusb library (https://pypi.python.org/pypi/pywinusb/).
-"""
-
-import sys
-from time import sleep
-import pywinusb.hid as hid
-
-# Generic HID device VID, PID and report payload length (length is increased
-# by one to account for the Report ID byte that must be pre-pended)
-device_vid = 0x03EB
-device_pid = 0x204F
-report_length = 1 + 8
-
-
-def get_hid_device_handle():
-    hid_device_filter = hid.HidDeviceFilter(vendor_id=device_vid,
-                                            product_id=device_pid)
-
-    valid_hid_devices = hid_device_filter.get_devices()
-
-    if len(valid_hid_devices) is 0:
-        return None
-    else:
-        return valid_hid_devices[0]
-
-
-def send_led_pattern(device, led1, led2, led3, led4):
-    # Report data for the demo is the report ID (always zero) followed by the
-    # LED on/off data
-    report_data = [0, led1, led2, led3, led4]
-
-    # Zero-extend the array to the length the report should be
-    report_data.extend([0] * (report_length - len(report_data)))
-
-    # Send the generated report to the device
-    device.send_output_report(report_data)
-
-    print("Sent LED Pattern: {0}".format(report_data[1:5]))
-
-
-def received_led_pattern(report_data):
-    print("Received LED Pattern: {0}".format(report_data[1:5]))
-
-
-def main():
-    hid_device = get_hid_device_handle()
-
-    if hid_device is None:
-        print("No valid HID device found.")
-        sys.exit(1)
-
-    try:
-        hid_device.open()
-
-        print("Connected to device 0x%04X/0x%04X - %s [%s]" %
-              (hid_device.vendor_id, hid_device.product_id,
-               hid_device.product_name, hid_device.vendor_name))
-
-        # Set up the HID input report handler to receive reports
-        hid_device.set_raw_data_handler(received_led_pattern)
-
-        p = 0
-        while (hid_device.is_plugged()):
-            # Convert the current pattern index to a bit-mask and send
-            send_led_pattern(hid_device,
-                             (p >> 3) & 1,
-                             (p >> 2) & 1,
-                             (p >> 1) & 1,
-                             (p >> 0) & 1)
-
-            # Compute next LED pattern in sequence
-            p = (p + 1) % 16
-
-            # Delay a bit for visual effect
-            sleep(.2)
-
-    finally:
-        hid_device.close()
-
-
-if __name__ == '__main__':
-    main()
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/asf.xml
deleted file mode 100644
index 710f7c719d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/asf.xml
+++ /dev/null
@@ -1,63 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Generic HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.generic_hid.example.avr8">

-		<require idref="lufa.demos.device.class.generic_hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Generic HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.generic_hid.example.xmega">

-		<require idref="lufa.demos.device.class.generic_hid"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.generic_hid" caption="Generic HID Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Generic HID device demo, implementing a device whose LEDs can be controlled via HID messages from the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="GenericHID.txt"/>

-		<build type="distribute" subtype="directory" value="HostTestApp"/>

-

-		<build type="c-source" value="GenericHID.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="GenericHID.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/doxyfile
deleted file mode 100644
index e8808812e5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/doxyfile
+++ /dev/null
@@ -1,2365 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Generic HID Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/ \
-                         HostTestApp/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/makefile
deleted file mode 100644
index 58e817644a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/GenericHID/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = GenericHID
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Config/LUFAConfig.h
deleted file mode 100644
index c6542445da..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               1
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Descriptors.c
deleted file mode 100644
index b257b7101d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Descriptors.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM JoystickReport[] =
-{
-	/* Use the HID class driver's standard Joystick report.
-	 *   Min X/Y/Z Axis values: -100
-	 *   Max X/Y/Z Axis values:  100
-	 *   Min physical X/Y/Z Axis values (used to determine resolution): -1
-	 *   Max physical X/Y/Z Axis values (used to determine resolution):  1
-	 *   Buttons: 2
-	 */
-	HID_DESCRIPTOR_JOYSTICK(-100, 100, -1, 1, 2)
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2043,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.HID_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Joystick,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_NonBootSubclass,
-			.Protocol               = HID_CSCP_NonBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_JoystickHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(JoystickReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = JOYSTICK_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = JOYSTICK_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Joystick Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_JoystickHID;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case HID_DTYPE_Report:
-			Address = &JoystickReport;
-			Size    = sizeof(JoystickReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Descriptors.h
deleted file mode 100644
index 47fe46c9af..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Descriptors.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Joystick HID Interface
-			USB_Descriptor_Interface_t            HID_Interface;
-			USB_HID_Descriptor_HID_t              HID_JoystickHID;
-	        USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_Joystick = 0, /**< Joystick interface desciptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Macros: */
-		/** Endpoint address of the Joystick HID reporting IN endpoint. */
-		#define JOYSTICK_EPADDR              (ENDPOINT_DIR_IN | 1)
-
-		/** Size in bytes of the Joystick HID reporting IN endpoint. */
-		#define JOYSTICK_EPSIZE              8
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Joystick.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Joystick.c
deleted file mode 100644
index 32cd4d9bc2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Joystick.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the Joystick demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "Joystick.h"
-
-/** Buffer to hold the previously generated HID report, for comparison purposes inside the HID class driver. */
-static uint8_t PrevJoystickHIDReportBuffer[sizeof(USB_JoystickReport_Data_t)];
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Device_t Joystick_HID_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber              = INTERFACE_ID_Joystick,
-				.ReportINEndpoint             =
-					{
-						.Address              = JOYSTICK_EPADDR,
-						.Size                 = JOYSTICK_EPSIZE,
-						.Banks                = 1,
-					},
-				.PrevReportINBuffer           = PrevJoystickHIDReportBuffer,
-				.PrevReportINBufferSize       = sizeof(PrevJoystickHIDReportBuffer),
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		HID_Device_USBTask(&Joystick_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	Buttons_Init();
-	USB_Init();
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Joystick_HID_Interface);
-
-	USB_Device_EnableSOFEvents();
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	HID_Device_ProcessControlRequest(&Joystick_HID_Interface);
-}
-
-/** Event handler for the USB device Start Of Frame event. */
-void EVENT_USB_Device_StartOfFrame(void)
-{
-	HID_Device_MillisecondElapsed(&Joystick_HID_Interface);
-}
-
-/** HID class driver callback function for the creation of HID reports to the host.
- *
- *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
- *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
- *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
- *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
- *
- *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
- */
-bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                         uint8_t* const ReportID,
-                                         const uint8_t ReportType,
-                                         void* ReportData,
-                                         uint16_t* const ReportSize)
-{
-	USB_JoystickReport_Data_t* JoystickReport = (USB_JoystickReport_Data_t*)ReportData;
-
-	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
-	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
-
-	if (JoyStatus_LCL & JOY_UP)
-	  JoystickReport->Y = -100;
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  JoystickReport->Y =  100;
-
-	if (JoyStatus_LCL & JOY_LEFT)
-	  JoystickReport->X = -100;
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  JoystickReport->X =  100;
-
-	if (JoyStatus_LCL & JOY_PRESS)
-	  JoystickReport->Button |= (1 << 1);
-
-	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
-	  JoystickReport->Button |= (1 << 0);
-
-	*ReportSize = sizeof(USB_JoystickReport_Data_t);
-	return false;
-}
-
-/** HID class driver callback function for the processing of HID reports from the host.
- *
- *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in] ReportID    Report ID of the received report from the host
- *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
- *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
- *  \param[in] ReportSize  Size in bytes of the received HID report
- */
-void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                          const uint8_t ReportID,
-                                          const uint8_t ReportType,
-                                          const void* ReportData,
-                                          const uint16_t ReportSize)
-{
-	// Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Joystick.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Joystick.h
deleted file mode 100644
index 8c8b33fa59..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Joystick.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Joystick.c.
- */
-
-#ifndef _JOYSTICK_H_
-#define _JOYSTICK_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Type Defines: */
-		/** Type define for the joystick HID report structure, for creating and sending HID reports to the host PC.
-		 *  This mirrors the layout described to the host in the HID report descriptor, in Descriptors.c.
-		 */
-		typedef struct
-		{
-			int8_t  X; /**< Current absolute joystick X position, as a signed 8-bit integer */
-			int8_t  Y; /**< Current absolute joystick Y position, as a signed 8-bit integer */
-			int8_t  Z; /**< Current absolute joystick Z position, as a signed 8-bit integer */
-			uint8_t Button; /**< Bit mask of the currently pressed joystick buttons */
-		} USB_JoystickReport_Data_t;
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                         uint8_t* const ReportID,
-		                                         const uint8_t ReportType,
-		                                         void* ReportData,
-		                                         uint16_t* const ReportSize);
-		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                          const uint8_t ReportID,
-		                                          const uint8_t ReportType,
-		                                          const void* ReportData,
-		                                          const uint16_t ReportSize);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Joystick.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Joystick.txt
deleted file mode 100644
index e3aec3d703..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/Joystick.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Joystick Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Joystick demonstration application. This gives a simple reference
- *  application for implementing a USB Keyboard device, for USB Joysticks
- *  using the standard Keyboard HID profile.
- *
- *  This device will show up as a generic joystick device, with two buttons.
- *  Pressing the joystick inwards is the first button, and the HWB button
- *  is the second.
- *
- *  Moving the joystick on the selected board moves the joystick location on
- *  the host computer.
- *
- *  Currently only single interface joysticks are supported.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/asf.xml
deleted file mode 100644
index 97d37a5aaf..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/asf.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Joystick HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.joystick.example.avr8">

-		<require idref="lufa.demos.device.class.joystick"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Joystick HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.joystick.example.xmega">

-		<require idref="lufa.demos.device.class.joystick"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.joystick" caption="Joystick HID Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Joystick HID device demo, implementing a basic USB joystick that can send movement information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="Joystick.txt"/>

-

-		<build type="c-source" value="Joystick.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Joystick.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-		<require idref="lufa.drivers.board.joystick"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/doxyfile
deleted file mode 100644
index a48265c0c7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Joystick Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/makefile
deleted file mode 100644
index 9df157b744..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Joystick/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = Joystick
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Config/LUFAConfig.h
deleted file mode 100644
index c6542445da..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               1
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Descriptors.c
deleted file mode 100644
index d45c1098fc..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Descriptors.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
-{
-	/* Use the HID class driver's standard Keyboard report.
-	 *   Max simultaneous keys: 6
-	 */
-	HID_DESCRIPTOR_KEYBOARD(6)
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2042,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.HID_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Keyboard,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_BootSubclass,
-			.Protocol               = HID_CSCP_KeyboardBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_KeyboardHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(KeyboardReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = KEYBOARD_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = KEYBOARD_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Keyboard Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_KeyboardHID;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case HID_DTYPE_Report:
-			Address = &KeyboardReport;
-			Size    = sizeof(KeyboardReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Descriptors.h
deleted file mode 100644
index 8bdb50ff36..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Descriptors.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Keyboard HID Interface
-			USB_Descriptor_Interface_t            HID_Interface;
-			USB_HID_Descriptor_HID_t              HID_KeyboardHID;
-			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_Keyboard = 0, /**< Keyboard interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Macros: */
-		/** Endpoint address of the Keyboard HID reporting IN endpoint. */
-		#define KEYBOARD_EPADDR              (ENDPOINT_DIR_IN | 1)
-
-		/** Size in bytes of the Keyboard HID reporting IN endpoint. */
-		#define KEYBOARD_EPSIZE              8
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Keyboard.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Keyboard.c
deleted file mode 100644
index df606cd25b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Keyboard.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the Keyboard demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "Keyboard.h"
-
-/** Buffer to hold the previously generated Keyboard HID report, for comparison purposes inside the HID class driver. */
-static uint8_t PrevKeyboardHIDReportBuffer[sizeof(USB_KeyboardReport_Data_t)];
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Device_t Keyboard_HID_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber              = INTERFACE_ID_Keyboard,
-				.ReportINEndpoint             =
-					{
-						.Address              = KEYBOARD_EPADDR,
-						.Size                 = KEYBOARD_EPSIZE,
-						.Banks                = 1,
-					},
-				.PrevReportINBuffer           = PrevKeyboardHIDReportBuffer,
-				.PrevReportINBufferSize       = sizeof(PrevKeyboardHIDReportBuffer),
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		HID_Device_USBTask(&Keyboard_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware()
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	Buttons_Init();
-	USB_Init();
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Keyboard_HID_Interface);
-
-	USB_Device_EnableSOFEvents();
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	HID_Device_ProcessControlRequest(&Keyboard_HID_Interface);
-}
-
-/** Event handler for the USB device Start Of Frame event. */
-void EVENT_USB_Device_StartOfFrame(void)
-{
-	HID_Device_MillisecondElapsed(&Keyboard_HID_Interface);
-}
-
-/** HID class driver callback function for the creation of HID reports to the host.
- *
- *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
- *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
- *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
- *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
- *
- *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
- */
-bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                         uint8_t* const ReportID,
-                                         const uint8_t ReportType,
-                                         void* ReportData,
-                                         uint16_t* const ReportSize)
-{
-	USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData;
-
-	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
-	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
-
-	uint8_t UsedKeyCodes = 0;
-
-	if (JoyStatus_LCL & JOY_UP)
-	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_A;
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_B;
-
-	if (JoyStatus_LCL & JOY_LEFT)
-	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_C;
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_D;
-
-	if (JoyStatus_LCL & JOY_PRESS)
-	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_E;
-
-	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
-	  KeyboardReport->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_F;
-
-	if (UsedKeyCodes)
-	  KeyboardReport->Modifier = HID_KEYBOARD_MODIFIER_LEFTSHIFT;
-
-	*ReportSize = sizeof(USB_KeyboardReport_Data_t);
-	return false;
-}
-
-/** HID class driver callback function for the processing of HID reports from the host.
- *
- *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in] ReportID    Report ID of the received report from the host
- *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
- *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
- *  \param[in] ReportSize  Size in bytes of the received HID report
- */
-void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                          const uint8_t ReportID,
-                                          const uint8_t ReportType,
-                                          const void* ReportData,
-                                          const uint16_t ReportSize)
-{
-	uint8_t  LEDMask   = LEDS_NO_LEDS;
-	uint8_t* LEDReport = (uint8_t*)ReportData;
-
-	if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK)
-	  LEDMask |= LEDS_LED1;
-
-	if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK)
-	  LEDMask |= LEDS_LED3;
-
-	if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK)
-	  LEDMask |= LEDS_LED4;
-
-	LEDs_SetAllLEDs(LEDMask);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Keyboard.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Keyboard.h
deleted file mode 100644
index 9e192a6651..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Keyboard.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Keyboard.c.
- */
-
-#ifndef _KEYBOARD_H_
-#define _KEYBOARD_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                         uint8_t* const ReportID,
-		                                         const uint8_t ReportType,
-		                                         void* ReportData,
-		                                         uint16_t* const ReportSize);
-		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                          const uint8_t ReportID,
-		                                          const uint8_t ReportType,
-		                                          const void* ReportData,
-		                                          const uint16_t ReportSize);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Keyboard.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Keyboard.txt
deleted file mode 100644
index 9b4375b2e3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/Keyboard.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Keyboard Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Keyboard Subclass</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Keyboard demonstration application. This gives a simple reference application
- *  for implementing a USB Keyboard using the basic USB HID drivers in all modern
- *  OSes (i.e. no special drivers required). It is boot protocol compatible, and thus
- *  works under compatible BIOS as if it was a native keyboard (e.g. PS/2).
- *
- *  On start-up the system will automatically enumerate and function as a keyboard
- *  when the USB connection to a host is present. To use the keyboard example,
- *  manipulate the joystick to send the letters a, b, c, d and e. See the USB HID
- *  documentation for more information on sending keyboard event and key presses. Unlike
- *  other LUFA Keyboard demos, this example shows explicitly how to send multiple key presses
- *  inside the same report to the host.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/asf.xml
deleted file mode 100644
index d7cdc17bcc..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/asf.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Keyboard HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard.example.avr8">

-		<require idref="lufa.demos.device.class.keyboard"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Keyboard HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard.example.xmega">

-		<require idref="lufa.demos.device.class.keyboard"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.keyboard" caption="Keyboard HID Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Keyboard HID device demo, implementing a basic USB keyboard that can send key press information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="Keyboard.txt"/>

-

-		<build type="c-source" value="Keyboard.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Keyboard.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.joystick"/>

-		<require idref="lufa.drivers.board.buttons"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/doxyfile
deleted file mode 100644
index 9962d7c796..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Keyboard Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/makefile
deleted file mode 100644
index 3b93655490..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Keyboard/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = Keyboard
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/Config/LUFAConfig.h
deleted file mode 100644
index fa03979109..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               3
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c
deleted file mode 100644
index 663e425dae..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- *
- *  This descriptor describes the mouse HID interface's report structure.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
-{
-	/* Use the HID class driver's standard Mouse report.
-	 *   Min X/Y Axis values: -1
-	 *   Max X/Y Axis values:  1
-	 *   Min physical X/Y Axis values (used to determine resolution): -1
-	 *   Max physical X/Y Axis values (used to determine resolution):  1
-	 *   Buttons: 3
-	 *   Absolute screen coordinates: false
-	 */
-	HID_DESCRIPTOR_MOUSE(-1, 1, -1, 1, 3, false)
-};
-
-/** Same as the MouseReport structure, but defines the keyboard HID interface's report structure. */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
-{
-	/* Use the HID class driver's standard Keyboard report.
-	 *   Max simultaneous keys: 6
-	 */
-	HID_DESCRIPTOR_KEYBOARD(6)
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x204D,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 2,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.HID1_KeyboardInterface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Keyboard,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_BootSubclass,
-			.Protocol               = HID_CSCP_KeyboardBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID1_KeyboardHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(KeyboardReport)
-		},
-
-	.HID1_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = KEYBOARD_IN_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = HID_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.HID2_MouseInterface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Mouse,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_BootSubclass,
-			.Protocol               = HID_CSCP_MouseBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID2_MouseHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(MouseReport)
-		},
-
-	.HID2_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MOUSE_IN_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = HID_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mouse and Keyboard Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			switch (wIndex)
-			{
-				case INTERFACE_ID_Keyboard:
-					Address = &ConfigurationDescriptor.HID1_KeyboardHID;
-					Size    = sizeof(USB_HID_Descriptor_HID_t);
-					break;
-				case INTERFACE_ID_Mouse:
-					Address = &ConfigurationDescriptor.HID2_MouseHID;
-					Size    = sizeof(USB_HID_Descriptor_HID_t);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_Report:
-			switch (wIndex)
-			{
-				case INTERFACE_ID_Keyboard:
-					Address = &KeyboardReport;
-					Size    = sizeof(KeyboardReport);
-					break;
-				case INTERFACE_ID_Mouse:
-					Address = &MouseReport;
-					Size    = sizeof(MouseReport);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h
deleted file mode 100644
index 70ee795dbc..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Keyboard HID Interface
-			USB_Descriptor_Interface_t            HID1_KeyboardInterface;
-			USB_HID_Descriptor_HID_t              HID1_KeyboardHID;
-			USB_Descriptor_Endpoint_t             HID1_ReportINEndpoint;
-
-			// Mouse HID Interface
-			USB_Descriptor_Interface_t            HID2_MouseInterface;
-			USB_HID_Descriptor_HID_t              HID2_MouseHID;
-			USB_Descriptor_Endpoint_t             HID2_ReportINEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_Keyboard = 0, /**< Keyboard interface descriptor ID */
-			INTERFACE_ID_Mouse    = 1, /**< Mouse interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Macros: */
-		/** Endpoint address of the Keyboard HID reporting IN endpoint. */
-		#define KEYBOARD_IN_EPADDR        (ENDPOINT_DIR_IN | 1)
-
-		/** Endpoint address of the Mouse HID reporting IN endpoint. */
-		#define MOUSE_IN_EPADDR           (ENDPOINT_DIR_IN | 3)
-
-		/** Size in bytes of each of the HID reporting IN endpoints. */
-		#define HID_EPSIZE                8
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c
deleted file mode 100644
index 7dacbbbe95..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the KeyboardMouse demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "KeyboardMouse.h"
-
-/** Buffer to hold the previously generated Keyboard HID report, for comparison purposes inside the HID class driver. */
-static uint8_t PrevKeyboardHIDReportBuffer[sizeof(USB_KeyboardReport_Data_t)];
-
-/** Buffer to hold the previously generated Mouse HID report, for comparison purposes inside the HID class driver. */
-static uint8_t PrevMouseHIDReportBuffer[sizeof(USB_MouseReport_Data_t)];
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another. This is for the keyboard HID
- *  interface within the device.
- */
-USB_ClassInfo_HID_Device_t Keyboard_HID_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber              = INTERFACE_ID_Keyboard,
-				.ReportINEndpoint             =
-					{
-						.Address              = KEYBOARD_IN_EPADDR,
-						.Size                 = HID_EPSIZE,
-						.Banks                = 1,
-					},
-				.PrevReportINBuffer           = PrevKeyboardHIDReportBuffer,
-				.PrevReportINBufferSize       = sizeof(PrevKeyboardHIDReportBuffer),
-			},
-	};
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another. This is for the mouse HID
- *  interface within the device.
- */
-USB_ClassInfo_HID_Device_t Mouse_HID_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber              = INTERFACE_ID_Mouse,
-				.ReportINEndpoint             =
-					{
-						.Address              = MOUSE_IN_EPADDR,
-						.Size                 = HID_EPSIZE,
-						.Banks                = 1,
-					},
-				.PrevReportINBuffer           = PrevMouseHIDReportBuffer,
-				.PrevReportINBufferSize       = sizeof(PrevMouseHIDReportBuffer),
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		HID_Device_USBTask(&Keyboard_HID_Interface);
-		HID_Device_USBTask(&Mouse_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware()
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-    LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-    LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Keyboard_HID_Interface);
-	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Mouse_HID_Interface);
-
-	USB_Device_EnableSOFEvents();
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	HID_Device_ProcessControlRequest(&Keyboard_HID_Interface);
-	HID_Device_ProcessControlRequest(&Mouse_HID_Interface);
-}
-
-/** Event handler for the USB device Start Of Frame event. */
-void EVENT_USB_Device_StartOfFrame(void)
-{
-	HID_Device_MillisecondElapsed(&Keyboard_HID_Interface);
-	HID_Device_MillisecondElapsed(&Mouse_HID_Interface);
-}
-
-/** HID class driver callback function for the creation of HID reports to the host.
- *
- *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
- *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
- *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
- *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
- *
- *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
- */
-bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                         uint8_t* const ReportID,
-                                         const uint8_t ReportType,
-                                         void* ReportData,
-                                         uint16_t* const ReportSize)
-{
-	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
-	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
-
-	/* Determine which interface must have its report generated */
-	if (HIDInterfaceInfo == &Keyboard_HID_Interface)
-	{
-		USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData;
-
-		/* If first board button not being held down, no keyboard report */
-		if (!(ButtonStatus_LCL & BUTTONS_BUTTON1))
-		  return 0;
-
-		KeyboardReport->Modifier = HID_KEYBOARD_MODIFIER_LEFTSHIFT;
-
-		if (JoyStatus_LCL & JOY_UP)
-		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_A;
-		else if (JoyStatus_LCL & JOY_DOWN)
-		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_B;
-
-		if (JoyStatus_LCL & JOY_LEFT)
-		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_C;
-		else if (JoyStatus_LCL & JOY_RIGHT)
-		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_D;
-
-		if (JoyStatus_LCL & JOY_PRESS)
-		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_E;
-
-		*ReportSize = sizeof(USB_KeyboardReport_Data_t);
-		return false;
-	}
-	else
-	{
-		USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData;
-
-		/* If first board button being held down, no mouse report */
-		if (ButtonStatus_LCL & BUTTONS_BUTTON1)
-		  return 0;
-
-		if (JoyStatus_LCL & JOY_UP)
-		  MouseReport->Y = -1;
-		else if (JoyStatus_LCL & JOY_DOWN)
-		  MouseReport->Y =  1;
-
-		if (JoyStatus_LCL & JOY_LEFT)
-		  MouseReport->X = -1;
-		else if (JoyStatus_LCL & JOY_RIGHT)
-		  MouseReport->X =  1;
-
-		if (JoyStatus_LCL & JOY_PRESS)
-		  MouseReport->Button |= (1 << 0);
-
-		*ReportSize = sizeof(USB_MouseReport_Data_t);
-		return true;
-	}
-}
-
-/** HID class driver callback function for the processing of HID reports from the host.
- *
- *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in] ReportID    Report ID of the received report from the host
- *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
- *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
- *  \param[in] ReportSize  Size in bytes of the received HID report
- */
-void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                          const uint8_t ReportID,
-                                          const uint8_t ReportType,
-                                          const void* ReportData,
-                                          const uint16_t ReportSize)
-{
-	if (HIDInterfaceInfo == &Keyboard_HID_Interface)
-	{
-		uint8_t  LEDMask   = LEDS_NO_LEDS;
-		uint8_t* LEDReport = (uint8_t*)ReportData;
-
-		if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK)
-		  LEDMask |= LEDS_LED1;
-
-		if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK)
-		  LEDMask |= LEDS_LED3;
-
-		if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK)
-		  LEDMask |= LEDS_LED4;
-
-		LEDs_SetAllLEDs(LEDMask);
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h
deleted file mode 100644
index e40d106d9c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-#ifndef _KEYBOARD_MOUSE_H_
-#define _KEYBOARD_MOUSE_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                         uint8_t* const ReportID,
-		                                         const uint8_t ReportType,
-		                                         void* ReportData,
-		                                         uint16_t* const ReportSize);
-		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                          const uint8_t ReportID,
-		                                          const uint8_t ReportType,
-		                                          const void* ReportData,
-		                                          const uint16_t ReportSize);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt
deleted file mode 100644
index 20c89cc80c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Dual HID Keyboard and Mouse Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Keyboard/Mouse demonstration application. This gives a simple reference
- *  application for implementing a composite device containing both USB Keyboard
- *  and USB Mouse functionality using the basic USB HID drivers in all modern OSes
- *  (i.e. no special drivers required). This example uses two separate HID
- *  interfaces for each function. It is boot protocol compatible, and thus works under
- *  compatible BIOS as if it was a native keyboard and mouse (e.g. PS/2).
- *
- *  On start-up the system will automatically enumerate and function
- *  as a keyboard when the USB connection to a host is present and the HWB is not
- *  pressed. When enabled, manipulate the joystick to send the letters
- *  a, b, c, d and e. See the USB HID documentation for more information
- *  on sending keyboard event and key presses.
- *
- *  When the HWB is pressed, the mouse mode is enabled. When enabled, move the
- *  joystick to move the pointer, and push the joystick inwards to simulate a
- *  left-button click.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/asf.xml
deleted file mode 100644
index 4b5ca01214..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/asf.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse.example.avr8">

-		<require idref="lufa.demos.device.class.keyboard_mouse"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse.example.xmega">

-		<require idref="lufa.demos.device.class.keyboard_mouse"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.keyboard_mouse" caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a pair of HID interfaces. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="KeyboardMouse.txt"/>

-

-		<build type="c-source" value="KeyboardMouse.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="KeyboardMouse.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.joystick"/>

-		<require idref="lufa.drivers.board.buttons"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/doxyfile
deleted file mode 100644
index 7428ae1cf9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Combined Keyboard/Mouse Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/makefile
deleted file mode 100644
index a0805d76ad..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouse/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = KeyboardMouse
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Config/LUFAConfig.h
deleted file mode 100644
index c6542445da..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               1
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c
deleted file mode 100644
index 6d9c3c250c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- *
- *  This descriptor describes the multiple possible reports of the HID interface's report structure.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM HIDReport[] =
-{
-	/* Mouse Report */
-	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
-	HID_RI_USAGE(8, 0x02), /* Mouse */
-	HID_RI_COLLECTION(8, 0x01), /* Application */
-		HID_RI_REPORT_ID(8, HID_REPORTID_MouseReport),
-		HID_RI_USAGE(8, 0x01), /* Pointer */
-		HID_RI_COLLECTION(8, 0x00), /* Physical */
-			HID_RI_USAGE_PAGE(8, 0x09), /* Button */
-			HID_RI_USAGE_MINIMUM(8, 0x01),
-			HID_RI_USAGE_MAXIMUM(8, 0x03),
-			HID_RI_LOGICAL_MINIMUM(8, 0x00),
-			HID_RI_LOGICAL_MAXIMUM(8, 0x01),
-			HID_RI_REPORT_COUNT(8, 0x03),
-			HID_RI_REPORT_SIZE(8, 0x01),
-			HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
-			HID_RI_REPORT_COUNT(8, 0x01),
-			HID_RI_REPORT_SIZE(8, 0x05),
-			HID_RI_INPUT(8, HID_IOF_CONSTANT),
-			HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
-			HID_RI_USAGE(8, 0x30), /* Usage X */
-			HID_RI_USAGE(8, 0x31), /* Usage Y */
-			HID_RI_LOGICAL_MINIMUM(8, -1),
-			HID_RI_LOGICAL_MAXIMUM(8, 1),
-			HID_RI_PHYSICAL_MINIMUM(8, -1),
-			HID_RI_PHYSICAL_MAXIMUM(8, 1),
-			HID_RI_REPORT_COUNT(8, 0x02),
-			HID_RI_REPORT_SIZE(8, 0x08),
-			HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
-		HID_RI_END_COLLECTION(0),
-	HID_RI_END_COLLECTION(0),
-
-	/* Keyboard Report */
-	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
-	HID_RI_USAGE(8, 0x06), /* Keyboard */
-	HID_RI_COLLECTION(8, 0x01), /* Application */
-		HID_RI_REPORT_ID(8, HID_REPORTID_KeyboardReport),
-		HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */
-		HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */
-		HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */
-		HID_RI_LOGICAL_MINIMUM(8, 0x00),
-		HID_RI_LOGICAL_MAXIMUM(8, 0x01),
-		HID_RI_REPORT_SIZE(8, 0x01),
-		HID_RI_REPORT_COUNT(8, 0x08),
-		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
-		HID_RI_REPORT_COUNT(8, 0x01),
-		HID_RI_REPORT_SIZE(8, 0x08),
-		HID_RI_INPUT(8, HID_IOF_CONSTANT),
-		HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */
-		HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */
-		HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */
-		HID_RI_REPORT_COUNT(8, 0x05),
-		HID_RI_REPORT_SIZE(8, 0x01),
-		HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
-		HID_RI_REPORT_COUNT(8, 0x01),
-		HID_RI_REPORT_SIZE(8, 0x03),
-		HID_RI_OUTPUT(8, HID_IOF_CONSTANT),
-		HID_RI_LOGICAL_MINIMUM(8, 0x00),
-		HID_RI_LOGICAL_MAXIMUM(8, 0x65),
-		HID_RI_USAGE_PAGE(8, 0x07), /* Keyboard */
-		HID_RI_USAGE_MINIMUM(8, 0x00), /* Reserved (no event indicated) */
-		HID_RI_USAGE_MAXIMUM(8, 0x65), /* Keyboard Application */
-		HID_RI_REPORT_COUNT(8, 0x06),
-		HID_RI_REPORT_SIZE(8, 0x08),
-		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
-	HID_RI_END_COLLECTION(0),
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2066,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.HID_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_KeyboardAndMouse,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_NonBootSubclass,
-			.Protocol               = HID_CSCP_NonBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_HIDData =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(HIDReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = HID_IN_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = HID_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Multi HID Report Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_HIDData;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case HID_DTYPE_Report:
-			Address = &HIDReport;
-			Size    = sizeof(HIDReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h
deleted file mode 100644
index 09a2b495c9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Combined Keyboard/Mouse HID Interface
-			USB_Descriptor_Interface_t            HID_Interface;
-			USB_HID_Descriptor_HID_t              HID_HIDData;
-			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_KeyboardAndMouse = 0, /**< Combined keyboard and mouse interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Macros: */
-		/** Endpoint address of the HID reporting IN endpoint. */
-		#define HID_IN_EPADDR             (ENDPOINT_DIR_IN | 1)
-
-		/** Size in bytes of each of the HID reporting IN endpoint. */
-		#define HID_EPSIZE                8
-
-	/* Enums: */
-		/** Enum for the HID report IDs used in the device. */
-		enum
-		{
-			HID_REPORTID_MouseReport    = 0x01, /**< Report ID for the Mouse report within the device. */
-			HID_REPORTID_KeyboardReport = 0x02, /**< Report ID for the Keyboard report within the device. */
-		} HID_Report_IDs;
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c
deleted file mode 100644
index 256216c868..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the KeyboardMouseMultiReport demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "KeyboardMouseMultiReport.h"
-
-/** Buffer to hold the previously generated HID report, for comparison purposes inside the HID class driver. */
-static uint8_t PrevHIDReportBuffer[MAX(sizeof(USB_KeyboardReport_Data_t), sizeof(USB_MouseReport_Data_t))];
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Device_t Device_HID_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber              = INTERFACE_ID_KeyboardAndMouse,
-				.ReportINEndpoint             =
-					{
-						.Address              = HID_IN_EPADDR,
-						.Size                 = HID_EPSIZE,
-						.Banks                = 1,
-					},
-				.PrevReportINBuffer           = PrevHIDReportBuffer,
-				.PrevReportINBufferSize       = sizeof(PrevHIDReportBuffer),
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		HID_Device_USBTask(&Device_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware()
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Device_HID_Interface);
-
-	USB_Device_EnableSOFEvents();
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	HID_Device_ProcessControlRequest(&Device_HID_Interface);
-}
-
-/** Event handler for the USB device Start Of Frame event. */
-void EVENT_USB_Device_StartOfFrame(void)
-{
-	HID_Device_MillisecondElapsed(&Device_HID_Interface);
-}
-
-/** HID class driver callback function for the creation of HID reports to the host.
- *
- *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
- *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
- *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
- *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
- *
- *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
- */
-bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                         uint8_t* const ReportID,
-                                         const uint8_t ReportType,
-                                         void* ReportData,
-                                         uint16_t* const ReportSize)
-{
-	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
-	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
-
-	if (!(ButtonStatus_LCL & BUTTONS_BUTTON1))
-	{
-		USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData;
-
-		KeyboardReport->Modifier = HID_KEYBOARD_MODIFIER_LEFTSHIFT;
-
-		if (JoyStatus_LCL & JOY_UP)
-		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_A;
-		else if (JoyStatus_LCL & JOY_DOWN)
-		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_B;
-
-		if (JoyStatus_LCL & JOY_LEFT)
-		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_C;
-		else if (JoyStatus_LCL & JOY_RIGHT)
-		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_D;
-
-		if (JoyStatus_LCL & JOY_PRESS)
-		  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_E;
-
-		*ReportID   = HID_REPORTID_KeyboardReport;
-		*ReportSize = sizeof(USB_KeyboardReport_Data_t);
-		return false;
-	}
-	else
-	{
-		USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData;
-
-		if (JoyStatus_LCL & JOY_UP)
-		  MouseReport->Y = -1;
-		else if (JoyStatus_LCL & JOY_DOWN)
-		  MouseReport->Y =  1;
-
-		if (JoyStatus_LCL & JOY_LEFT)
-		  MouseReport->X = -1;
-		else if (JoyStatus_LCL & JOY_RIGHT)
-		  MouseReport->X =  1;
-
-		if (JoyStatus_LCL & JOY_PRESS)
-		  MouseReport->Button |= (1 << 0);
-
-		*ReportID   = HID_REPORTID_MouseReport;
-		*ReportSize = sizeof(USB_MouseReport_Data_t);
-		return true;
-	}
-}
-
-/** HID class driver callback function for the processing of HID reports from the host.
- *
- *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in] ReportID    Report ID of the received report from the host
- *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
- *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
- *  \param[in] ReportSize  Size in bytes of the received HID report
- */
-void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                          const uint8_t ReportID,
-                                          const uint8_t ReportType,
-                                          const void* ReportData,
-                                          const uint16_t ReportSize)
-{
-	uint8_t  LEDMask   = LEDS_NO_LEDS;
-	uint8_t* LEDReport = (uint8_t*)ReportData;
-
-	if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK)
-	  LEDMask |= LEDS_LED1;
-
-	if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK)
-	  LEDMask |= LEDS_LED3;
-
-	if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK)
-	  LEDMask |= LEDS_LED4;
-
-	LEDs_SetAllLEDs(LEDMask);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.h
deleted file mode 100644
index e40d106d9c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-#ifndef _KEYBOARD_MOUSE_H_
-#define _KEYBOARD_MOUSE_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                         uint8_t* const ReportID,
-		                                         const uint8_t ReportType,
-		                                         void* ReportData,
-		                                         uint16_t* const ReportSize);
-		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                          const uint8_t ReportID,
-		                                          const uint8_t ReportType,
-		                                          const void* ReportData,
-		                                          const uint16_t ReportSize);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt
deleted file mode 100644
index 6ff910e167..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Multiple Report HID Keyboard and Mouse Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Keyboard/Mouse demonstration application, using a single HID interface. This gives
- *  a simple reference application for implementing a multiple HID report device
- *  containing both USB Keyboard and USB Mouse functionality using the basic USB HID
- *  drivers in all modern OSes (i.e. no special drivers required). This example uses a
- *  single HID interface that is shared between the two functions.
- *
- *  On start-up the system will automatically enumerate and function as a keyboard when
- *  the USB connection to a host is present and the HWB is not pressed. When enabled,
- *  manipulate the joystick to send the letters a, b, c, d and e. See the USB HID
- *  documentation for more information on sending keyboard event and key presses.
- *
- *  When the HWB is pressed, the mouse mode is enabled. When enabled, move the joystick
- *  to move the pointer, and push the joystick inwards to simulate a left-button click.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/asf.xml
deleted file mode 100644
index 39487fd8a7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/asf.xml
+++ /dev/null
@@ -1,61 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse_mr.example.avr8">

-		<require idref="lufa.demos.device.class.keyboard_mouse_mr"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse_mr.example.xmega">

-		<require idref="lufa.demos.device.class.keyboard_mouse_mr"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.keyboard_mouse_mr" caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a single HID interface and multiple logical reports. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="KeyboardMouseMultiReport.txt"/>

-

-		<build type="c-source" value="KeyboardMouseMultiReport.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="KeyboardMouseMultiReport.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.joystick"/>

-		<require idref="lufa.drivers.board.buttons"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/doxyfile
deleted file mode 100644
index 138ef6b6aa..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Combined Keyboard/Mouse (Multiple HID Report) Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile
deleted file mode 100644
index 8f55b3ee7e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = KeyboardMouseMultiReport
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/Config/LUFAConfig.h
deleted file mode 100644
index a06b60275c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               2
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/Descriptors.c
deleted file mode 100644
index f7138ca59c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/Descriptors.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2048,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces          = 2,
-
-			.ConfigurationNumber      = 1,
-			.ConfigurationStrIndex    = NO_DESCRIPTOR,
-
-			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
-		},
-
-	.Audio_ControlInterface =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioControl,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 0,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_ControlSubclass,
-			.Protocol                 = AUDIO_CSCP_ControlProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_ControlInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
-
-			.ACSpecification          = VERSION_BCD(1,0,0),
-			.TotalLength              = sizeof(USB_Audio_Descriptor_Interface_AC_t),
-
-			.InCollection             = 1,
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-		},
-
-	.Audio_StreamInterface =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 2,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_MIDIStreamingSubclass,
-			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_AudioInterface_AS_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
-
-			.AudioSpecification       = VERSION_BCD(1,0,0),
-
-			.TotalLength              = (sizeof(USB_Descriptor_Configuration_t) -
-			                             offsetof(USB_Descriptor_Configuration_t, Audio_StreamInterface_SPC))
-		},
-
-	.MIDI_In_Jack_Emb =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_Embedded,
-			.JackID                   = 0x01,
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_In_Jack_Ext =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_External,
-			.JackID                   = 0x02,
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_Out_Jack_Emb =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_Embedded,
-			.JackID                   = 0x03,
-
-			.NumberOfPins             = 1,
-			.SourceJackID             = {0x02},
-			.SourcePinID              = {0x01},
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_Out_Jack_Ext =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_External,
-			.JackID                   = 0x04,
-
-			.NumberOfPins             = 1,
-			.SourceJackID             = {0x01},
-			.SourcePinID              = {0x01},
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_In_Jack_Endpoint =
-		{
-			.Endpoint =
-				{
-					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
-
-					.EndpointAddress     = MIDI_STREAM_OUT_EPADDR,
-					.Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-					.EndpointSize        = MIDI_STREAM_EPSIZE,
-					.PollingIntervalMS   = 0x05
-				},
-
-			.Refresh                  = 0,
-			.SyncEndpointNumber       = 0
-		},
-
-	.MIDI_In_Jack_Endpoint_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint},
-			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
-
-			.TotalEmbeddedJacks       = 0x01,
-			.AssociatedJackID         = {0x01}
-		},
-
-	.MIDI_Out_Jack_Endpoint =
-		{
-			.Endpoint =
-				{
-					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
-
-					.EndpointAddress     = MIDI_STREAM_IN_EPADDR,
-					.Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-					.EndpointSize        = MIDI_STREAM_EPSIZE,
-					.PollingIntervalMS   = 0x05
-				},
-
-			.Refresh                  = 0,
-			.SyncEndpointNumber       = 0
-		},
-
-	.MIDI_Out_Jack_Endpoint_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint},
-			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
-
-			.TotalEmbeddedJacks       = 0x01,
-			.AssociatedJackID         = {0x03}
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA MIDI Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/Descriptors.h
deleted file mode 100644
index 677b3e1cae..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/Descriptors.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-	/* Macros: */
-		/** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */
-		#define MIDI_STREAM_IN_EPADDR       (ENDPOINT_DIR_IN  | 2)
-
-		/** Endpoint address of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */
-		#define MIDI_STREAM_OUT_EPADDR      (ENDPOINT_DIR_OUT | 1)
-
-		/** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */
-		#define MIDI_STREAM_EPSIZE          64
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t     Config;
-
-			// MIDI Audio Control Interface
-			USB_Descriptor_Interface_t                Audio_ControlInterface;
-			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
-
-			// MIDI Audio Streaming Interface
-			USB_Descriptor_Interface_t                Audio_StreamInterface;
-			USB_MIDI_Descriptor_AudioInterface_AS_t   Audio_StreamInterface_SPC;
-			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Emb;
-			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Ext;
-			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Emb;
-			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Ext;
-			USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_In_Jack_Endpoint;
-			USB_MIDI_Descriptor_Jack_Endpoint_t       MIDI_In_Jack_Endpoint_SPC;
-			USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_Out_Jack_Endpoint;
-			USB_MIDI_Descriptor_Jack_Endpoint_t       MIDI_Out_Jack_Endpoint_SPC;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
-			INTERFACE_ID_AudioStream  = 1, /**< Audio streaming interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/MIDI.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/MIDI.c
deleted file mode 100644
index 46260c0908..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/MIDI.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MIDI demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "MIDI.h"
-
-/** LUFA MIDI Class driver interface configuration and state information. This structure is
- *  passed to all MIDI Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_MIDI_Device_t Keyboard_MIDI_Interface =
-	{
-		.Config =
-			{
-				.StreamingInterfaceNumber = INTERFACE_ID_AudioStream,
-				.DataINEndpoint           =
-					{
-						.Address          = MIDI_STREAM_IN_EPADDR,
-						.Size             = MIDI_STREAM_EPSIZE,
-						.Banks            = 1,
-					},
-				.DataOUTEndpoint          =
-					{
-						.Address          = MIDI_STREAM_OUT_EPADDR,
-						.Size             = MIDI_STREAM_EPSIZE,
-						.Banks            = 1,
-					},
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		CheckJoystickMovement();
-
-		MIDI_EventPacket_t ReceivedMIDIEvent;
-		while (MIDI_Device_ReceiveEventPacket(&Keyboard_MIDI_Interface, &ReceivedMIDIEvent))
-		{
-			if ((ReceivedMIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)) && (ReceivedMIDIEvent.Data3 > 0))
-			  LEDs_SetAllLEDs(ReceivedMIDIEvent.Data2 > 64 ? LEDS_LED1 : LEDS_LED2);
-			else
-			  LEDs_SetAllLEDs(LEDS_NO_LEDS);
-		}
-
-		MIDI_Device_USBTask(&Keyboard_MIDI_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	Buttons_Init();
-	USB_Init();
-}
-
-/** Checks for changes in the position of the board joystick, sending MIDI events to the host upon each change. */
-void CheckJoystickMovement(void)
-{
-	static uint8_t PrevJoystickStatus;
-
-	uint8_t MIDICommand = 0;
-	uint8_t MIDIPitch;
-
-	/* Get current joystick mask, XOR with previous to detect joystick changes */
-	uint8_t JoystickStatus  = Joystick_GetStatus();
-	uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);
-
-	/* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */
-	uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1));
-
-	if (JoystickChanges & JOY_LEFT)
-	{
-		MIDICommand = ((JoystickStatus & JOY_LEFT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3C;
-	}
-
-	if (JoystickChanges & JOY_UP)
-	{
-		MIDICommand = ((JoystickStatus & JOY_UP)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3D;
-	}
-
-	if (JoystickChanges & JOY_RIGHT)
-	{
-		MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3E;
-	}
-
-	if (JoystickChanges & JOY_DOWN)
-	{
-		MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3F;
-	}
-
-	if (JoystickChanges & JOY_PRESS)
-	{
-		MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3B;
-	}
-
-	if (MIDICommand)
-	{
-		MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
-			{
-				.Event       = MIDI_EVENT(0, MIDICommand),
-
-				.Data1       = MIDICommand | Channel,
-				.Data2       = MIDIPitch,
-				.Data3       = MIDI_STANDARD_VELOCITY,
-			};
-
-		MIDI_Device_SendEventPacket(&Keyboard_MIDI_Interface, &MIDIEvent);
-		MIDI_Device_Flush(&Keyboard_MIDI_Interface);
-	}
-
-	PrevJoystickStatus = JoystickStatus;
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= MIDI_Device_ConfigureEndpoints(&Keyboard_MIDI_Interface);
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	MIDI_Device_ProcessControlRequest(&Keyboard_MIDI_Interface);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/MIDI.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/MIDI.h
deleted file mode 100644
index 93ed6b8889..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/MIDI.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MIDI.c.
- */
-
-#ifndef _MIDI_H_
-#define _MIDI_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void CheckJoystickMovement(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/MIDI.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/MIDI.txt
deleted file mode 100644
index c076be3bc1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/MIDI.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage MIDI Input Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Standard Audio Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Audio Class Specification \n
- *        USB-MIDI Audio Class Extension Specification \n
- *        General MIDI Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  MIDI demonstration application. This gives a simple reference
- *  application for implementing the USB-MIDI class in USB devices.
- *  It is built upon the USB Audio class.
- *
- *  Joystick movements are translated into note on/off messages and
- *  are sent to the host PC as MIDI streams which can be read by any
- *  MIDI program supporting MIDI IN devices.
- *
- *  If the HWB is not pressed, channel 1 (default piano) is used. If
- *  the HWB is pressed, then channel 10 (default percussion) is selected.
- *
- *  This device implements MIDI-THRU mode, with the IN MIDI data being
- *  generated by the device itself. OUT MIDI data is discarded.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/asf.xml
deleted file mode 100644
index 33a4fd5830..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/asf.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.midi.example.avr8">

-		<require idref="lufa.demos.device.class.midi"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.midi.example.xmega">

-		<require idref="lufa.demos.device.class.midi"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.midi" caption="MIDI Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		MIDI device demo, implementing a basic USB MIDI device that can send messages to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="MIDI Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MIDI.txt"/>

-

-		<build type="c-source" value="MIDI.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="MIDI.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-		<require idref="lufa.drivers.board.joystick"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/doxyfile
deleted file mode 100644
index b7b1862f74..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - MIDI Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/makefile
deleted file mode 100644
index 4d868dcb0d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MIDI/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MIDI
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Config/AppConfig.h
deleted file mode 100644
index 4be9d2b6b1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Config/AppConfig.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define TOTAL_LUNS                1
-
-	#define DISK_READ_ONLY            false
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Config/LUFAConfig.h
deleted file mode 100644
index 3c3b68bb1a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               4
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Descriptors.c
deleted file mode 100644
index 598155a45a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Descriptors.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2045,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = USB_CONFIG_ATTR_RESERVED,
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.MS_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_MassStorage,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = MS_CSCP_MassStorageClass,
-			.SubClass               = MS_CSCP_SCSITransparentSubclass,
-			.Protocol               = MS_CSCP_BulkOnlyTransportProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.MS_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MASS_STORAGE_IN_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.MS_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MASS_STORAGE_OUT_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mass Storage Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Descriptors.h
deleted file mode 100644
index 067bda8bd6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Descriptors.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
-		#define MASS_STORAGE_IN_EPADDR         (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */
-		#define MASS_STORAGE_OUT_EPADDR        (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the Mass Storage data endpoints. */
-		#define MASS_STORAGE_IO_EPSIZE         64
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Mass Storage Interface
-			USB_Descriptor_Interface_t            MS_Interface;
-			USB_Descriptor_Endpoint_t             MS_DataInEndpoint;
-			USB_Descriptor_Endpoint_t             MS_DataOutEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_MassStorage = 0, /**< Mass storage interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c
deleted file mode 100644
index d28eff298b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c
+++ /dev/null
@@ -1,534 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Functions to manage the physical Dataflash media, including reading and writing of
- *  blocks of data. These functions are called by the SCSI layer when data must be stored
- *  or retrieved to/from the physical storage media. If a different media is used (such
- *  as a SD card or EEPROM), functions similar to these will need to be generated.
- */
-
-#define  INCLUDE_FROM_DATAFLASHMANAGER_C
-#include "DataflashManager.h"
-
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
- *  the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes
- *  them to the Dataflash in Dataflash page sized blocks.
- *
- *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
- *  \param[in] BlockAddress  Data block starting address for the write sequence
- *  \param[in] TotalBlocks   Number of blocks of data to write
- */
-void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                  const uint32_t BlockAddress,
-                                  uint16_t TotalBlocks)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-	bool     UsingSecondBuffer   = false;
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the Dataflash buffer */
-	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
-	Dataflash_SendAddressBytes(CurrDFPage, 0);
-	Dataflash_WaitWhileBusy();
-#endif
-
-	/* Send the Dataflash buffer write command */
-	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
-	Dataflash_SendAddressBytes(0, CurrDFPageByte);
-
-	/* Wait until endpoint is ready before continuing */
-	if (Endpoint_WaitUntilReady())
-	  return;
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if the endpoint is currently empty */
-			if (!(Endpoint_IsReadWriteAllowed()))
-			{
-				/* Clear the current endpoint bank */
-				Endpoint_ClearOUT();
-
-				/* Wait until the host has sent another packet */
-				if (Endpoint_WaitUntilReady())
-				  return;
-			}
-
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Write the Dataflash buffer contents back to the Dataflash page */
-				Dataflash_WaitWhileBusy();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
-				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
-				  UsingSecondBuffer = !(UsingSecondBuffer);
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
-				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
-				{
-					/* Copy selected dataflash's current page contents to the Dataflash buffer */
-					Dataflash_WaitWhileBusy();
-					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
-					Dataflash_SendAddressBytes(CurrDFPage, 0);
-					Dataflash_WaitWhileBusy();
-				}
-#endif
-
-				/* Send the Dataflash buffer write command */
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
-				Dataflash_SendAddressBytes(0, 0);
-			}
-
-			/* Write one 16-byte chunk of data to the Dataflash */
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-
-			/* Check if the current command is being aborted by the host */
-			if (MSInterfaceInfo->State.IsMassStoreReset)
-			  return;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Write the Dataflash buffer contents back to the Dataflash page */
-	Dataflash_WaitWhileBusy();
-	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
-	Dataflash_WaitWhileBusy();
-
-	/* If the endpoint is empty, clear it ready for the next packet from the host */
-	if (!(Endpoint_IsReadWriteAllowed()))
-	  Endpoint_ClearOUT();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
- *  the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash
- *  and writes them in OS sized blocks to the endpoint.
- *
- *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
- *  \param[in] BlockAddress  Data block starting address for the read sequence
- *  \param[in] TotalBlocks   Number of blocks of data to read
- */
-void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                 const uint32_t BlockAddress,
-                                 uint16_t TotalBlocks)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-	/* Send the Dataflash main memory page read command */
-	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-
-	/* Wait until endpoint is ready before continuing */
-	if (Endpoint_WaitUntilReady())
-	  return;
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if the endpoint is currently full */
-			if (!(Endpoint_IsReadWriteAllowed()))
-			{
-				/* Clear the endpoint bank to send its contents to the host */
-				Endpoint_ClearIN();
-
-				/* Wait until the endpoint is ready for more data */
-				if (Endpoint_WaitUntilReady())
-				  return;
-			}
-
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-				/* Send the Dataflash main memory page read command */
-				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-			}
-
-			/* Read one 16-byte chunk of data from the Dataflash */
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-
-			/* Check if the current command is being aborted by the host */
-			if (MSInterfaceInfo->State.IsMassStoreReset)
-			  return;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* If the endpoint is full, send its contents to the host */
-	if (!(Endpoint_IsReadWriteAllowed()))
-	  Endpoint_ClearIN();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
- *  the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the
- *  Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
- *  Dataflash.
- *
- *  \param[in] BlockAddress  Data block starting address for the write sequence
- *  \param[in] TotalBlocks   Number of blocks of data to write
- *  \param[in] BufferPtr     Pointer to the data source RAM buffer
- */
-void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
-                                      uint16_t TotalBlocks,
-                                      uint8_t* BufferPtr)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-	bool     UsingSecondBuffer   = false;
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the Dataflash buffer */
-	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
-	Dataflash_SendAddressBytes(CurrDFPage, 0);
-	Dataflash_WaitWhileBusy();
-#endif
-
-	/* Send the Dataflash buffer write command */
-	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
-	Dataflash_SendAddressBytes(0, CurrDFPageByte);
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Write the Dataflash buffer contents back to the Dataflash page */
-				Dataflash_WaitWhileBusy();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
-				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
-				  UsingSecondBuffer = !(UsingSecondBuffer);
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
-				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
-				{
-					/* Copy selected dataflash's current page contents to the Dataflash buffer */
-					Dataflash_WaitWhileBusy();
-					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
-					Dataflash_SendAddressBytes(CurrDFPage, 0);
-					Dataflash_WaitWhileBusy();
-				}
-#endif
-
-				/* Send the Dataflash buffer write command */
-				Dataflash_ToggleSelectedChipCS();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
-				Dataflash_SendAddressBytes(0, 0);
-			}
-
-			/* Write one 16-byte chunk of data to the Dataflash */
-			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
-			  Dataflash_SendByte(*(BufferPtr++));
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Write the Dataflash buffer contents back to the Dataflash page */
-	Dataflash_WaitWhileBusy();
-	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
-	Dataflash_WaitWhileBusy();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
- *  the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash
- *  and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read
- *  the files stored on the Dataflash.
- *
- *  \param[in] BlockAddress  Data block starting address for the read sequence
- *  \param[in] TotalBlocks   Number of blocks of data to read
- *  \param[out] BufferPtr    Pointer to the data destination RAM buffer
- */
-void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
-                                     uint16_t TotalBlocks,
-                                     uint8_t* BufferPtr)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-	/* Send the Dataflash main memory page read command */
-	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-				/* Send the Dataflash main memory page read command */
-				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-			}
-
-			/* Read one 16-byte chunk of data from the Dataflash */
-			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
-			  *(BufferPtr++) = Dataflash_ReceiveByte();
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
-void DataflashManager_ResetDataflashProtections(void)
-{
-	/* Select first Dataflash chip, send the read status register command */
-	Dataflash_SelectChip(DATAFLASH_CHIP1);
-	Dataflash_SendByte(DF_CMD_GETSTATUS);
-
-	/* Check if sector protection is enabled */
-	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
-	{
-		Dataflash_ToggleSelectedChipCS();
-
-		/* Send the commands to disable sector protection */
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
-	}
-
-	/* Select second Dataflash chip (if present on selected board), send read status register command */
-	#if (DATAFLASH_TOTALCHIPS == 2)
-	Dataflash_SelectChip(DATAFLASH_CHIP2);
-	Dataflash_SendByte(DF_CMD_GETSTATUS);
-
-	/* Check if sector protection is enabled */
-	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
-	{
-		Dataflash_ToggleSelectedChipCS();
-
-		/* Send the commands to disable sector protection */
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
-	}
-	#endif
-
-	/* Deselect current Dataflash chip */
-	Dataflash_DeselectChip();
-}
-
-/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working.
- *
- *  \return Boolean \c true if all media chips are working, \c false otherwise
- */
-bool DataflashManager_CheckDataflashOperation(void)
-{
-	uint8_t ReturnByte;
-
-	/* Test first Dataflash IC is present and responding to commands */
-	Dataflash_SelectChip(DATAFLASH_CHIP1);
-	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
-	ReturnByte = Dataflash_ReceiveByte();
-	Dataflash_DeselectChip();
-
-	/* If returned data is invalid, fail the command */
-	if (ReturnByte != DF_MANUFACTURER_ATMEL)
-	  return false;
-
-	#if (DATAFLASH_TOTALCHIPS == 2)
-	/* Test second Dataflash IC is present and responding to commands */
-	Dataflash_SelectChip(DATAFLASH_CHIP2);
-	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
-	ReturnByte = Dataflash_ReceiveByte();
-	Dataflash_DeselectChip();
-
-	/* If returned data is invalid, fail the command */
-	if (ReturnByte != DF_MANUFACTURER_ATMEL)
-	  return false;
-	#endif
-
-	return true;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h
deleted file mode 100644
index 9f0cc4f3ef..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DataflashManager.c.
- */
-
-#ifndef _DATAFLASH_MANAGER_H_
-#define _DATAFLASH_MANAGER_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-
-		#include "../MassStorage.h"
-		#include "../Descriptors.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Common/Common.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/Dataflash.h>
-
-	/* Preprocessor Checks: */
-		#if (DATAFLASH_PAGE_SIZE % 16)
-			#error Dataflash page size must be a multiple of 16 bytes.
-		#endif
-
-	/* Defines: */
-		/** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */
-		#define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
-
-		/** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
-		 *  storage media (Dataflash) using a different native block size. Do not change this value.
-		 */
-		#define VIRTUAL_MEMORY_BLOCK_SIZE           512
-
-		/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not
-		 *  change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size.
-		 */
-		#define VIRTUAL_MEMORY_BLOCKS               (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
-
-		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
-		#define LUN_MEDIA_BLOCKS                    (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
-
-	/* Function Prototypes: */
-		void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-		                                  const uint32_t BlockAddress,
-		                                  uint16_t TotalBlocks);
-		void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-		                                 const uint32_t BlockAddress,
-		                                 uint16_t TotalBlocks);
-		void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
-		                                      uint16_t TotalBlocks,
-		                                      uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
-		void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
-		                                     uint16_t TotalBlocks,
-		                                     uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
-		void DataflashManager_ResetDataflashProtections(void);
-		bool DataflashManager_CheckDataflashOperation(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c
deleted file mode 100644
index 122e388722..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  SCSI command processing routines, for SCSI commands issued by the host. Mass Storage
- *  devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information,
- *  which wrap around standard SCSI device commands for controlling the actual storage medium.
- */
-
-#define  INCLUDE_FROM_SCSI_C
-#include "SCSI.h"
-
-/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
- *  features and capabilities.
- */
-static const SCSI_Inquiry_Response_t InquiryData =
-	{
-		.DeviceType          = DEVICE_TYPE_BLOCK,
-		.PeripheralQualifier = 0,
-
-		.Removable           = true,
-
-		.Version             = 0,
-
-		.ResponseDataFormat  = 2,
-		.NormACA             = false,
-		.TrmTsk              = false,
-		.AERC                = false,
-
-		.AdditionalLength    = 0x1F,
-
-		.SoftReset           = false,
-		.CmdQue              = false,
-		.Linked              = false,
-		.Sync                = false,
-		.WideBus16Bit        = false,
-		.WideBus32Bit        = false,
-		.RelAddr             = false,
-
-		.VendorID            = "LUFA",
-		.ProductID           = "Dataflash Disk",
-		.RevisionID          = {'0','.','0','0'},
-	};
-
-/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE
- *  command is issued. This gives information on exactly why the last command failed to complete.
- */
-static SCSI_Request_Sense_Response_t SenseData =
-	{
-		.ResponseCode        = 0x70,
-		.AdditionalLength    = 0x0A,
-	};
-
-
-/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches
- *  to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns
- *  a command failure due to a ILLEGAL REQUEST.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise
- */
-bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	bool CommandSuccess = false;
-
-	/* Run the appropriate SCSI command hander function based on the passed command */
-	switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0])
-	{
-		case SCSI_CMD_INQUIRY:
-			CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_REQUEST_SENSE:
-			CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_READ_CAPACITY_10:
-			CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_SEND_DIAGNOSTIC:
-			CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_WRITE_10:
-			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE);
-			break;
-		case SCSI_CMD_READ_10:
-			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ);
-			break;
-		case SCSI_CMD_MODE_SENSE_6:
-			CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_START_STOP_UNIT:
-		case SCSI_CMD_TEST_UNIT_READY:
-		case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-		case SCSI_CMD_VERIFY_10:
-			/* These commands should just succeed, no handling required */
-			CommandSuccess = true;
-			MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
-			break;
-		default:
-			/* Update the SENSE key to reflect the invalid command */
-			SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		                   SCSI_ASENSE_INVALID_COMMAND,
-		                   SCSI_ASENSEQ_NO_QUALIFIER);
-			break;
-	}
-
-	/* Check if command was successfully processed */
-	if (CommandSuccess)
-	{
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD,
-		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return true;
-	}
-
-	return false;
-}
-
-/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features
- *  and capabilities to the host.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint16_t AllocationLength  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]);
-	uint16_t BytesTransferred  = MIN(AllocationLength, sizeof(InquiryData));
-
-	/* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */
-	if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||
-	     MSInterfaceInfo->State.CommandBlock.SCSICommandData[2])
-	{
-		/* Optional but unsupported bits set - update the SENSE key and fail the request */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL);
-
-	/* Pad out remaining bytes with 0x00 */
-	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
-
-	/* Finalize the stream transfer to send the last packet */
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command,
- *  including the error code and additional error information so that the host can determine why a command failed to complete.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint8_t  AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];
-	uint8_t  BytesTransferred = MIN(AllocationLength, sizeof(SenseData));
-
-	Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL);
-	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity
- *  on the selected Logical Unit (drive), as a number of OS-sized blocks.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint32_t LastBlockAddressInLUN = (LUN_MEDIA_BLOCKS - 1);
-	uint32_t MediaBlockSize        = VIRTUAL_MEMORY_BLOCK_SIZE;
-
-	Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL);
-	Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL);
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the
- *  board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is
- *  supported.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	/* Check to see if the SELF TEST bit is not set */
-	if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2)))
-	{
-		/* Only self-test supported - update SENSE key and fail the command */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Check to see if all attached Dataflash ICs are functional */
-	if (!(DataflashManager_CheckDataflashOperation()))
-	{
-		/* Update SENSE key with a hardware error condition and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR,
-		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address
- *  and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual
- *  reading and writing of the data.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *  \param[in] IsDataRead  Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                      const bool IsDataRead)
-{
-	uint32_t BlockAddress;
-	uint16_t TotalBlocks;
-
-	/* Check if the disk is write protected or not */
-	if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY)
-	{
-		/* Block address is invalid, update SENSE key and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT,
-		               SCSI_ASENSE_WRITE_PROTECTED,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
-	BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);
-
-	/* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */
-	TotalBlocks  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]);
-
-	/* Check if the block address is outside the maximum allowable value for the LUN */
-	if (BlockAddress >= LUN_MEDIA_BLOCKS)
-	{
-		/* Block address is invalid, update SENSE key and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	#if (TOTAL_LUNS > 1)
-	/* Adjust the given block address to the real media address based on the selected LUN */
-	BlockAddress += ((uint32_t)MSInterfaceInfo->State.CommandBlock.LUN * LUN_MEDIA_BLOCKS);
-	#endif
-
-	/* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
-	if (IsDataRead == DATA_READ)
-	  DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
-	else
-	  DataflashManager_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
-
-	/* Update the bytes transferred counter and succeed the command */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);
-
-	return true;
-}
-
-/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about
- *  the SCSI device, as well as the device's Write Protect status.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	/* Send an empty header response with the Write Protect flag status */
-	Endpoint_Write_8(0x00);
-	Endpoint_Write_8(0x00);
-	Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00);
-	Endpoint_Write_8(0x00);
-	Endpoint_ClearIN();
-
-	/* Update the bytes transferred counter and succeed the command */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4;
-
-	return true;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h
deleted file mode 100644
index f663baa5c4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for SCSI.c.
- */
-
-#ifndef _SCSI_H_
-#define _SCSI_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "../MassStorage.h"
-		#include "../Descriptors.h"
-		#include "DataflashManager.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
-		 *  is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
-		 *  the last command failure) in a quick and easy manner.
-		 *
-		 *  \param[in] Key    New SCSI sense key to set the sense code to
-		 *  \param[in] Acode  New SCSI additional sense key to set the additional sense code to
-		 *  \param[in] Aqual  New SCSI additional sense key qualifier to set the additional sense qualifier code to
-		 */
-		#define SCSI_SET_SENSE(Key, Acode, Aqual)  do { SenseData.SenseKey                 = (Key);   \
-		                                                SenseData.AdditionalSenseCode      = (Acode); \
-		                                                SenseData.AdditionalSenseQualifier = (Aqual); } while (0)
-
-		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */
-		#define DATA_READ           true
-
-		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */
-		#define DATA_WRITE          false
-
-		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */
-		#define DEVICE_TYPE_BLOCK   0x00
-
-		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */
-		#define DEVICE_TYPE_CDROM   0x05
-
-	/* Function Prototypes: */
-		bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-
-		#if defined(INCLUDE_FROM_SCSI_C)
-			static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-			                                      const bool IsDataRead);
-			static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/MassStorage.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/MassStorage.c
deleted file mode 100644
index 750101d88e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/MassStorage.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MassStorage demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "MassStorage.h"
-
-/** LUFA Mass Storage Class driver interface configuration and state information. This structure is
- *  passed to all Mass Storage Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_MS_Device_t Disk_MS_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber           = INTERFACE_ID_MassStorage,
-				.DataINEndpoint            =
-					{
-						.Address           = MASS_STORAGE_IN_EPADDR,
-						.Size              = MASS_STORAGE_IO_EPSIZE,
-						.Banks             = 1,
-					},
-				.DataOUTEndpoint           =
-					{
-						.Address           = MASS_STORAGE_OUT_EPADDR,
-						.Size              = MASS_STORAGE_IO_EPSIZE,
-						.Banks             = 1,
-					},
-				.TotalLUNs                 = TOTAL_LUNS,
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		MS_Device_USBTask(&Disk_MS_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	Dataflash_Init();
-	USB_Init();
-
-	/* Check if the Dataflash is working, abort if not */
-	if (!(DataflashManager_CheckDataflashOperation()))
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		for(;;);
-	}
-
-	/* Clear Dataflash sector protections, if enabled */
-	DataflashManager_ResetDataflashProtections();
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= MS_Device_ConfigureEndpoints(&Disk_MS_Interface);
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	MS_Device_ProcessControlRequest(&Disk_MS_Interface);
-}
-
-/** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface configuration structure being referenced
- */
-bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	bool CommandSuccess;
-
-	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-	CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo);
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-
-	return CommandSuccess;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/MassStorage.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/MassStorage.h
deleted file mode 100644
index 76474729db..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/MassStorage.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MassStorage.c.
- */
-
-#ifndef _MASS_STORAGE_H_
-#define _MASS_STORAGE_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include "Lib/SCSI.h"
-		#include "Lib/DataflashManager.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY          LEDS_LED2
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-		bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/MassStorage.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/MassStorage.txt
deleted file mode 100644
index 31779e9c02..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/MassStorage.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Mass Storage Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Mass Storage Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Bulk-Only Transport</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Mass Storage Standard \n
- *        USB Bulk-Only Transport Standard \n
- *        SCSI Primary Commands Specification \n
- *        SCSI Block Commands Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Mass Storage device demonstration application. This gives a simple
- *  reference application for implementing a USB Mass Storage device using
- *  the basic USB UFI drivers in all modern OSes (i.e. no special drivers
- *  required).
- *
- *  On start-up the system will automatically enumerate and function as an
- *  external mass storage device which may be formatted and used in the same
- *  manner as commercial USB Mass Storage devices.
- *
- *  You will need to format the mass storage drive upon first run of this
- *  demonstration - as the device acts only as a data block transport between
- *  the host and the storage media, it does not matter what file system is used,
- *  as the data interpretation is performed by the host and not the USB device.
- *
- *  This demo is not restricted to only a single LUN (logical disk); by changing
- *  the TOTAL_LUNS value in DataflashManager.h, any number of LUNs can be used
- *  (from 1 to 255), with each LUN being allocated an equal portion of the available
- *  Dataflash memory.
- *
- *  The USB control endpoint is managed entirely by the library using endpoint
- *  interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for
- *  the host to reset the Mass Storage device state during long transfers without
- *  the need for complicated polling logic.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>TOTAL_LUNS</td>
- *    <td>AppConfig.h</td>
- *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
- *        this can be set to any positive non-zero amount.</td>
- *   </tr>
- *   <tr>
- *    <td>DISK_READ_ONLY</td>
- *    <td>AppConfig.h</td>
- *    <td>Configuration define, indicating if the disk should be write protected or not.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/asf.xml
deleted file mode 100644
index 6f5a8dc03e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/asf.xml
+++ /dev/null
@@ -1,67 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage.example.avr8">

-		<require idref="lufa.demos.device.class.mass_storage"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage.example.xmega">

-		<require idref="lufa.demos.device.class.mass_storage"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.mass_storage" caption="Mass Storage Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Mass Storage device demo, implementing a basic USB storage disk using a Dataflash memory IC. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="Mass Storage Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MassStorage.txt"/>

-

-		<build type="c-source" value="MassStorage.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="c-source" value="Lib/DataflashManager.c"/>

-		<build type="c-source" value="Lib/SCSI.c"/>

-		<build type="header-file" value="MassStorage.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="header-file" value="Lib/DataflashManager.h"/>

-		<build type="header-file" value="Lib/SCSI.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.dataflash"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/doxyfile
deleted file mode 100644
index 9629ccb8a2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Mass Storage Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/makefile
deleted file mode 100644
index c242c2602f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorage/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MassStorage
-SRC          = $(TARGET).c Descriptors.c Lib/DataflashManager.c Lib/SCSI.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Config/AppConfig.h
deleted file mode 100644
index 4be9d2b6b1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Config/AppConfig.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define TOTAL_LUNS                1
-
-	#define DISK_READ_ONLY            false
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Config/LUFAConfig.h
deleted file mode 100644
index 58fd4bb5a6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               5
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c
deleted file mode 100644
index 90187c1e4c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
-{
-	/* Use the HID class driver's standard Keyboard report.
-	 *   Max simultaneous keys: 6
-	 */
-	HID_DESCRIPTOR_KEYBOARD(6)
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2061,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 2,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = USB_CONFIG_ATTR_RESERVED,
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.MS_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_MassStorage,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = MS_CSCP_MassStorageClass,
-			.SubClass               = MS_CSCP_SCSITransparentSubclass,
-			.Protocol               = MS_CSCP_BulkOnlyTransportProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.MS_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MASS_STORAGE_IN_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.MS_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MASS_STORAGE_OUT_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.HID_KeyboardInterface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Keyboard,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_BootSubclass,
-			.Protocol               = HID_CSCP_KeyboardBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_KeyboardHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(KeyboardReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = KEYBOARD_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = KEYBOARD_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mass Storage and Keyboard Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_KeyboardHID;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case HID_DTYPE_Report:
-			Address = &KeyboardReport;
-			Size    = sizeof(KeyboardReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h
deleted file mode 100644
index e12dfa20d5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the Keyboard HID reporting IN endpoint. */
-		#define KEYBOARD_EPADDR              (ENDPOINT_DIR_IN  | 1)
-
-		/** Size in bytes of the Keyboard HID reporting IN endpoint. */
-		#define KEYBOARD_EPSIZE              8
-
-		/** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
-		#define MASS_STORAGE_IN_EPADDR       (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */
-		#define MASS_STORAGE_OUT_EPADDR      (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the Mass Storage data endpoints. */
-		#define MASS_STORAGE_IO_EPSIZE       64
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Mass Storage Interface
-			USB_Descriptor_Interface_t            MS_Interface;
-			USB_Descriptor_Endpoint_t             MS_DataInEndpoint;
-			USB_Descriptor_Endpoint_t             MS_DataOutEndpoint;
-
-			// Generic HID Interface
-			USB_Descriptor_Interface_t            HID_KeyboardInterface;
-			USB_HID_Descriptor_HID_t              HID_KeyboardHID;
-	        USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_MassStorage = 0, /**< Mass storage interface descriptor ID */
-			INTERFACE_ID_Keyboard    = 1, /**< Keyboard interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c
deleted file mode 100644
index d28eff298b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c
+++ /dev/null
@@ -1,534 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Functions to manage the physical Dataflash media, including reading and writing of
- *  blocks of data. These functions are called by the SCSI layer when data must be stored
- *  or retrieved to/from the physical storage media. If a different media is used (such
- *  as a SD card or EEPROM), functions similar to these will need to be generated.
- */
-
-#define  INCLUDE_FROM_DATAFLASHMANAGER_C
-#include "DataflashManager.h"
-
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
- *  the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes
- *  them to the Dataflash in Dataflash page sized blocks.
- *
- *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
- *  \param[in] BlockAddress  Data block starting address for the write sequence
- *  \param[in] TotalBlocks   Number of blocks of data to write
- */
-void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                  const uint32_t BlockAddress,
-                                  uint16_t TotalBlocks)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-	bool     UsingSecondBuffer   = false;
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the Dataflash buffer */
-	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
-	Dataflash_SendAddressBytes(CurrDFPage, 0);
-	Dataflash_WaitWhileBusy();
-#endif
-
-	/* Send the Dataflash buffer write command */
-	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
-	Dataflash_SendAddressBytes(0, CurrDFPageByte);
-
-	/* Wait until endpoint is ready before continuing */
-	if (Endpoint_WaitUntilReady())
-	  return;
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if the endpoint is currently empty */
-			if (!(Endpoint_IsReadWriteAllowed()))
-			{
-				/* Clear the current endpoint bank */
-				Endpoint_ClearOUT();
-
-				/* Wait until the host has sent another packet */
-				if (Endpoint_WaitUntilReady())
-				  return;
-			}
-
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Write the Dataflash buffer contents back to the Dataflash page */
-				Dataflash_WaitWhileBusy();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
-				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
-				  UsingSecondBuffer = !(UsingSecondBuffer);
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
-				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
-				{
-					/* Copy selected dataflash's current page contents to the Dataflash buffer */
-					Dataflash_WaitWhileBusy();
-					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
-					Dataflash_SendAddressBytes(CurrDFPage, 0);
-					Dataflash_WaitWhileBusy();
-				}
-#endif
-
-				/* Send the Dataflash buffer write command */
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
-				Dataflash_SendAddressBytes(0, 0);
-			}
-
-			/* Write one 16-byte chunk of data to the Dataflash */
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-
-			/* Check if the current command is being aborted by the host */
-			if (MSInterfaceInfo->State.IsMassStoreReset)
-			  return;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Write the Dataflash buffer contents back to the Dataflash page */
-	Dataflash_WaitWhileBusy();
-	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
-	Dataflash_WaitWhileBusy();
-
-	/* If the endpoint is empty, clear it ready for the next packet from the host */
-	if (!(Endpoint_IsReadWriteAllowed()))
-	  Endpoint_ClearOUT();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
- *  the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash
- *  and writes them in OS sized blocks to the endpoint.
- *
- *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
- *  \param[in] BlockAddress  Data block starting address for the read sequence
- *  \param[in] TotalBlocks   Number of blocks of data to read
- */
-void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                 const uint32_t BlockAddress,
-                                 uint16_t TotalBlocks)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-	/* Send the Dataflash main memory page read command */
-	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-
-	/* Wait until endpoint is ready before continuing */
-	if (Endpoint_WaitUntilReady())
-	  return;
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if the endpoint is currently full */
-			if (!(Endpoint_IsReadWriteAllowed()))
-			{
-				/* Clear the endpoint bank to send its contents to the host */
-				Endpoint_ClearIN();
-
-				/* Wait until the endpoint is ready for more data */
-				if (Endpoint_WaitUntilReady())
-				  return;
-			}
-
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-				/* Send the Dataflash main memory page read command */
-				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-			}
-
-			/* Read one 16-byte chunk of data from the Dataflash */
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-
-			/* Check if the current command is being aborted by the host */
-			if (MSInterfaceInfo->State.IsMassStoreReset)
-			  return;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* If the endpoint is full, send its contents to the host */
-	if (!(Endpoint_IsReadWriteAllowed()))
-	  Endpoint_ClearIN();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
- *  the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the
- *  Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
- *  Dataflash.
- *
- *  \param[in] BlockAddress  Data block starting address for the write sequence
- *  \param[in] TotalBlocks   Number of blocks of data to write
- *  \param[in] BufferPtr     Pointer to the data source RAM buffer
- */
-void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
-                                      uint16_t TotalBlocks,
-                                      uint8_t* BufferPtr)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-	bool     UsingSecondBuffer   = false;
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the Dataflash buffer */
-	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
-	Dataflash_SendAddressBytes(CurrDFPage, 0);
-	Dataflash_WaitWhileBusy();
-#endif
-
-	/* Send the Dataflash buffer write command */
-	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
-	Dataflash_SendAddressBytes(0, CurrDFPageByte);
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Write the Dataflash buffer contents back to the Dataflash page */
-				Dataflash_WaitWhileBusy();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
-				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
-				  UsingSecondBuffer = !(UsingSecondBuffer);
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
-				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
-				{
-					/* Copy selected dataflash's current page contents to the Dataflash buffer */
-					Dataflash_WaitWhileBusy();
-					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
-					Dataflash_SendAddressBytes(CurrDFPage, 0);
-					Dataflash_WaitWhileBusy();
-				}
-#endif
-
-				/* Send the Dataflash buffer write command */
-				Dataflash_ToggleSelectedChipCS();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
-				Dataflash_SendAddressBytes(0, 0);
-			}
-
-			/* Write one 16-byte chunk of data to the Dataflash */
-			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
-			  Dataflash_SendByte(*(BufferPtr++));
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Write the Dataflash buffer contents back to the Dataflash page */
-	Dataflash_WaitWhileBusy();
-	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
-	Dataflash_WaitWhileBusy();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
- *  the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash
- *  and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read
- *  the files stored on the Dataflash.
- *
- *  \param[in] BlockAddress  Data block starting address for the read sequence
- *  \param[in] TotalBlocks   Number of blocks of data to read
- *  \param[out] BufferPtr    Pointer to the data destination RAM buffer
- */
-void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
-                                     uint16_t TotalBlocks,
-                                     uint8_t* BufferPtr)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-	/* Send the Dataflash main memory page read command */
-	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-				/* Send the Dataflash main memory page read command */
-				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-			}
-
-			/* Read one 16-byte chunk of data from the Dataflash */
-			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
-			  *(BufferPtr++) = Dataflash_ReceiveByte();
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
-void DataflashManager_ResetDataflashProtections(void)
-{
-	/* Select first Dataflash chip, send the read status register command */
-	Dataflash_SelectChip(DATAFLASH_CHIP1);
-	Dataflash_SendByte(DF_CMD_GETSTATUS);
-
-	/* Check if sector protection is enabled */
-	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
-	{
-		Dataflash_ToggleSelectedChipCS();
-
-		/* Send the commands to disable sector protection */
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
-	}
-
-	/* Select second Dataflash chip (if present on selected board), send read status register command */
-	#if (DATAFLASH_TOTALCHIPS == 2)
-	Dataflash_SelectChip(DATAFLASH_CHIP2);
-	Dataflash_SendByte(DF_CMD_GETSTATUS);
-
-	/* Check if sector protection is enabled */
-	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
-	{
-		Dataflash_ToggleSelectedChipCS();
-
-		/* Send the commands to disable sector protection */
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
-	}
-	#endif
-
-	/* Deselect current Dataflash chip */
-	Dataflash_DeselectChip();
-}
-
-/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working.
- *
- *  \return Boolean \c true if all media chips are working, \c false otherwise
- */
-bool DataflashManager_CheckDataflashOperation(void)
-{
-	uint8_t ReturnByte;
-
-	/* Test first Dataflash IC is present and responding to commands */
-	Dataflash_SelectChip(DATAFLASH_CHIP1);
-	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
-	ReturnByte = Dataflash_ReceiveByte();
-	Dataflash_DeselectChip();
-
-	/* If returned data is invalid, fail the command */
-	if (ReturnByte != DF_MANUFACTURER_ATMEL)
-	  return false;
-
-	#if (DATAFLASH_TOTALCHIPS == 2)
-	/* Test second Dataflash IC is present and responding to commands */
-	Dataflash_SelectChip(DATAFLASH_CHIP2);
-	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
-	ReturnByte = Dataflash_ReceiveByte();
-	Dataflash_DeselectChip();
-
-	/* If returned data is invalid, fail the command */
-	if (ReturnByte != DF_MANUFACTURER_ATMEL)
-	  return false;
-	#endif
-
-	return true;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h
deleted file mode 100644
index b48b3e851e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DataflashManager.c.
- */
-
-#ifndef _DATAFLASH_MANAGER_H_
-#define _DATAFLASH_MANAGER_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-
-		#include "../MassStorageKeyboard.h"
-		#include "../Descriptors.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Common/Common.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/Dataflash.h>
-
-	/* Preprocessor Checks: */
-		#if (DATAFLASH_PAGE_SIZE % 16)
-			#error Dataflash page size must be a multiple of 16 bytes.
-		#endif
-
-	/* Defines: */
-		/** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */
-		#define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
-
-		/** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
-		 *  storage media (Dataflash) using a different native block size.
-		 */
-		#define VIRTUAL_MEMORY_BLOCK_SIZE           512
-
-		/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. */
-		#define VIRTUAL_MEMORY_BLOCKS              (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
-
-		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
-		#define LUN_MEDIA_BLOCKS         (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
-
-	/* Function Prototypes: */
-		void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-		                                  const uint32_t BlockAddress,
-		                                  uint16_t TotalBlocks);
-		void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-		                                 const uint32_t BlockAddress,
-		                                 uint16_t TotalBlocks);
-		void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
-		                                      uint16_t TotalBlocks,
-		                                      uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
-		void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
-		                                     uint16_t TotalBlocks,
-		                                     uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
-		void DataflashManager_ResetDataflashProtections(void);
-		bool DataflashManager_CheckDataflashOperation(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c
deleted file mode 100644
index 122e388722..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  SCSI command processing routines, for SCSI commands issued by the host. Mass Storage
- *  devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information,
- *  which wrap around standard SCSI device commands for controlling the actual storage medium.
- */
-
-#define  INCLUDE_FROM_SCSI_C
-#include "SCSI.h"
-
-/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
- *  features and capabilities.
- */
-static const SCSI_Inquiry_Response_t InquiryData =
-	{
-		.DeviceType          = DEVICE_TYPE_BLOCK,
-		.PeripheralQualifier = 0,
-
-		.Removable           = true,
-
-		.Version             = 0,
-
-		.ResponseDataFormat  = 2,
-		.NormACA             = false,
-		.TrmTsk              = false,
-		.AERC                = false,
-
-		.AdditionalLength    = 0x1F,
-
-		.SoftReset           = false,
-		.CmdQue              = false,
-		.Linked              = false,
-		.Sync                = false,
-		.WideBus16Bit        = false,
-		.WideBus32Bit        = false,
-		.RelAddr             = false,
-
-		.VendorID            = "LUFA",
-		.ProductID           = "Dataflash Disk",
-		.RevisionID          = {'0','.','0','0'},
-	};
-
-/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE
- *  command is issued. This gives information on exactly why the last command failed to complete.
- */
-static SCSI_Request_Sense_Response_t SenseData =
-	{
-		.ResponseCode        = 0x70,
-		.AdditionalLength    = 0x0A,
-	};
-
-
-/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches
- *  to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns
- *  a command failure due to a ILLEGAL REQUEST.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise
- */
-bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	bool CommandSuccess = false;
-
-	/* Run the appropriate SCSI command hander function based on the passed command */
-	switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0])
-	{
-		case SCSI_CMD_INQUIRY:
-			CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_REQUEST_SENSE:
-			CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_READ_CAPACITY_10:
-			CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_SEND_DIAGNOSTIC:
-			CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_WRITE_10:
-			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE);
-			break;
-		case SCSI_CMD_READ_10:
-			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ);
-			break;
-		case SCSI_CMD_MODE_SENSE_6:
-			CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_START_STOP_UNIT:
-		case SCSI_CMD_TEST_UNIT_READY:
-		case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-		case SCSI_CMD_VERIFY_10:
-			/* These commands should just succeed, no handling required */
-			CommandSuccess = true;
-			MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
-			break;
-		default:
-			/* Update the SENSE key to reflect the invalid command */
-			SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		                   SCSI_ASENSE_INVALID_COMMAND,
-		                   SCSI_ASENSEQ_NO_QUALIFIER);
-			break;
-	}
-
-	/* Check if command was successfully processed */
-	if (CommandSuccess)
-	{
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD,
-		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return true;
-	}
-
-	return false;
-}
-
-/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features
- *  and capabilities to the host.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint16_t AllocationLength  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]);
-	uint16_t BytesTransferred  = MIN(AllocationLength, sizeof(InquiryData));
-
-	/* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */
-	if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||
-	     MSInterfaceInfo->State.CommandBlock.SCSICommandData[2])
-	{
-		/* Optional but unsupported bits set - update the SENSE key and fail the request */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL);
-
-	/* Pad out remaining bytes with 0x00 */
-	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
-
-	/* Finalize the stream transfer to send the last packet */
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command,
- *  including the error code and additional error information so that the host can determine why a command failed to complete.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint8_t  AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];
-	uint8_t  BytesTransferred = MIN(AllocationLength, sizeof(SenseData));
-
-	Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL);
-	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity
- *  on the selected Logical Unit (drive), as a number of OS-sized blocks.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint32_t LastBlockAddressInLUN = (LUN_MEDIA_BLOCKS - 1);
-	uint32_t MediaBlockSize        = VIRTUAL_MEMORY_BLOCK_SIZE;
-
-	Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL);
-	Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL);
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the
- *  board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is
- *  supported.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	/* Check to see if the SELF TEST bit is not set */
-	if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2)))
-	{
-		/* Only self-test supported - update SENSE key and fail the command */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Check to see if all attached Dataflash ICs are functional */
-	if (!(DataflashManager_CheckDataflashOperation()))
-	{
-		/* Update SENSE key with a hardware error condition and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR,
-		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address
- *  and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual
- *  reading and writing of the data.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *  \param[in] IsDataRead  Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                      const bool IsDataRead)
-{
-	uint32_t BlockAddress;
-	uint16_t TotalBlocks;
-
-	/* Check if the disk is write protected or not */
-	if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY)
-	{
-		/* Block address is invalid, update SENSE key and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT,
-		               SCSI_ASENSE_WRITE_PROTECTED,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
-	BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);
-
-	/* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */
-	TotalBlocks  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]);
-
-	/* Check if the block address is outside the maximum allowable value for the LUN */
-	if (BlockAddress >= LUN_MEDIA_BLOCKS)
-	{
-		/* Block address is invalid, update SENSE key and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	#if (TOTAL_LUNS > 1)
-	/* Adjust the given block address to the real media address based on the selected LUN */
-	BlockAddress += ((uint32_t)MSInterfaceInfo->State.CommandBlock.LUN * LUN_MEDIA_BLOCKS);
-	#endif
-
-	/* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
-	if (IsDataRead == DATA_READ)
-	  DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
-	else
-	  DataflashManager_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
-
-	/* Update the bytes transferred counter and succeed the command */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);
-
-	return true;
-}
-
-/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about
- *  the SCSI device, as well as the device's Write Protect status.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	/* Send an empty header response with the Write Protect flag status */
-	Endpoint_Write_8(0x00);
-	Endpoint_Write_8(0x00);
-	Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00);
-	Endpoint_Write_8(0x00);
-	Endpoint_ClearIN();
-
-	/* Update the bytes transferred counter and succeed the command */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4;
-
-	return true;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h
deleted file mode 100644
index 8ccc146ca2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for SCSI.c.
- */
-
-#ifndef _SCSI_H_
-#define _SCSI_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "../MassStorageKeyboard.h"
-		#include "../Descriptors.h"
-		#include "DataflashManager.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
-		 *  is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
-		 *  the last command failure) in a quick and easy manner.
-		 *
-		 *  \param[in] Key    New SCSI sense key to set the sense code to
-		 *  \param[in] Acode  New SCSI additional sense key to set the additional sense code to
-		 *  \param[in] Aqual  New SCSI additional sense key qualifier to set the additional sense qualifier code to
-		 */
-		#define SCSI_SET_SENSE(Key, Acode, Aqual)  do { SenseData.SenseKey                 = (Key);   \
-		                                                SenseData.AdditionalSenseCode      = (Acode); \
-		                                                SenseData.AdditionalSenseQualifier = (Aqual); } while (0)
-
-		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */
-		#define DATA_READ           true
-
-		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */
-		#define DATA_WRITE          false
-
-		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */
-		#define DEVICE_TYPE_BLOCK   0x00
-
-		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */
-		#define DEVICE_TYPE_CDROM   0x05
-
-	/* Function Prototypes: */
-		bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-
-		#if defined(INCLUDE_FROM_SCSI_C)
-			static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-			                                      const bool IsDataRead);
-			static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c
deleted file mode 100644
index a6ecb6bde0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MassStorageKeyboard demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "MassStorageKeyboard.h"
-
-/** LUFA Mass Storage Class driver interface configuration and state information. This structure is
- *  passed to all Mass Storage Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_MS_Device_t Disk_MS_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber           = INTERFACE_ID_MassStorage,
-				.DataINEndpoint            =
-					{
-						.Address           = MASS_STORAGE_IN_EPADDR,
-						.Size              = MASS_STORAGE_IO_EPSIZE,
-						.Banks             = 1,
-					},
-				.DataOUTEndpoint            =
-					{
-						.Address           = MASS_STORAGE_OUT_EPADDR,
-						.Size              = MASS_STORAGE_IO_EPSIZE,
-						.Banks             = 1,
-					},
-				.TotalLUNs                 = TOTAL_LUNS,
-			},
-	};
-
-/** Buffer to hold the previously generated Keyboard HID report, for comparison purposes inside the HID class driver. */
-static uint8_t PrevKeyboardHIDReportBuffer[sizeof(USB_KeyboardReport_Data_t)];
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Device_t Keyboard_HID_Interface =
- 	{
-		.Config =
-			{
-				.InterfaceNumber              = INTERFACE_ID_Keyboard,
-				.ReportINEndpoint             =
-					{
-						.Address              = KEYBOARD_EPADDR,
-						.Size                 = KEYBOARD_EPSIZE,
-						.Banks                = 1,
-					},
-				.PrevReportINBuffer           = PrevKeyboardHIDReportBuffer,
-				.PrevReportINBufferSize       = sizeof(PrevKeyboardHIDReportBuffer),
-			},
-    };
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		MS_Device_USBTask(&Disk_MS_Interface);
-		HID_Device_USBTask(&Keyboard_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	Joystick_Init();
-	Buttons_Init();
-	Dataflash_Init();
-	USB_Init();
-
-	/* Check if the Dataflash is working, abort if not */
-	if (!(DataflashManager_CheckDataflashOperation()))
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		for(;;);
-	}
-
-	/* Clear Dataflash sector protections, if enabled */
-	DataflashManager_ResetDataflashProtections();
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Keyboard_HID_Interface);
-	ConfigSuccess &= MS_Device_ConfigureEndpoints(&Disk_MS_Interface);
-
-	USB_Device_EnableSOFEvents();
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	MS_Device_ProcessControlRequest(&Disk_MS_Interface);
-	HID_Device_ProcessControlRequest(&Keyboard_HID_Interface);
-}
-
-/** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface configuration structure being referenced
- */
-bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	bool CommandSuccess;
-
-	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-	CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo);
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-
-	return CommandSuccess;
-}
-
-/** Event handler for the USB device Start Of Frame event. */
-void EVENT_USB_Device_StartOfFrame(void)
-{
-    HID_Device_MillisecondElapsed(&Keyboard_HID_Interface);
-}
-
-/** HID class driver callback function for the creation of HID reports to the host.
- *
- *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
- *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
- *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
- *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
- *
- *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
- */
-bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                         uint8_t* const ReportID,
-                                         const uint8_t ReportType,
-                                         void* ReportData,
-                                         uint16_t* const ReportSize)
-{
-	USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData;
-
-	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
-	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
-
-	KeyboardReport->Modifier = HID_KEYBOARD_MODIFIER_LEFTSHIFT;
-
-	if (JoyStatus_LCL & JOY_UP)
-	  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_A;
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_B;
-
-	if (JoyStatus_LCL & JOY_LEFT)
-	  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_C;
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_D;
-
-	if (JoyStatus_LCL & JOY_PRESS)
-	  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_E;
-
-	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
-	  KeyboardReport->KeyCode[0] = HID_KEYBOARD_SC_F;
-
-	*ReportSize = sizeof(USB_KeyboardReport_Data_t);
-	return false;
-}
-
-/** HID class driver callback function for the processing of HID reports from the host.
- *
- *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in] ReportID    Report ID of the received report from the host
- *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
- *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
- *  \param[in] ReportSize  Size in bytes of the received HID report
- */
-void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                          const uint8_t ReportID,
-                                          const uint8_t ReportType,
-                                          const void* ReportData,
-                                          const uint16_t ReportSize)
-{
-	uint8_t  LEDMask   = LEDS_NO_LEDS;
-	uint8_t* LEDReport = (uint8_t*)ReportData;
-
-	if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK)
-	  LEDMask |= LEDS_LED1;
-
-	if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK)
-	  LEDMask |= LEDS_LED3;
-
-	if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK)
-	  LEDMask |= LEDS_LED4;
-
-	LEDs_SetAllLEDs(LEDMask);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h
deleted file mode 100644
index 0494b46c38..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MassStorageKeyboard.c.
- */
-
-#ifndef _MASS_STORAGE_KEYBOARD_H_
-#define _MASS_STORAGE_KEYBOARD_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include "Lib/SCSI.h"
-		#include "Lib/DataflashManager.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY         LEDS_LED2
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-		bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-
-		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                         uint8_t* const ReportID,
-		                                         const uint8_t ReportType,
-		                                         void* ReportData,
-		                                         uint16_t* const ReportSize);
-		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                          const uint8_t ReportID,
-		                                          const uint8_t ReportType,
-		                                          const void* ReportData,
-		                                          const uint16_t ReportSize);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
deleted file mode 100644
index c84769ade1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Combined Mass Storage and Keyboard Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Classes:</b></td>
- *    <td>Mass Storage Device \n
- *        Human Interface Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclasses:</b></td>
- *    <td>Bulk-Only Transport \n
- *        Keyboard Subclass</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Mass Storage Standard \n
- *        USB Bulk-Only Transport Standard \n
- *        SCSI Primary Commands Specification \n
- *        SCSI Block Commands Specification \n
- *        USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Combined Mass Storage and Keyboard demonstration application. This gives a
- *  simple reference application for implementing a dual class USB Mass Storage
- *  and USB HID Keyboard device using the basic USB UFI and HID drivers in all
- *  modern OSes (i.e. no special drivers required).
- *
- *  On start-up the system will automatically enumerate and function as an
- *  external mass storage device (which may be formatted and used in the same
- *  manner as commercial USB Mass Storage devices) and a USB keyboard.
- *
- *  You will need to format the mass storage drive upon first run of this
- *  demonstration - as the device acts only as a data block transport between
- *  the host and the storage media, it does not matter what file system is used,
- *  as the data interpretation is performed by the host and not the USB device.
- *
- *  Keys on the USB keyboard can be pressed by moving the board's Joystick.
- *
- *  The USB control endpoint is managed entirely by the library using endpoint
- *  interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for
- *  the host to reset the Mass Storage device state during long transfers without
- *  the need for complicated polling logic.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>TOTAL_LUNS</td>
- *    <td>AppConfig.h</td>
- *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
- *        this can be set to any positive non-zero amount.</td>
- *   </tr>
- *   <tr>
- *    <td>DISK_READ_ONLY</td>
- *    <td>AppConfig.h</td>
- *    <td>Configuration define, indicating if the disk should be write protected or not.</td>
- *   </tr>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/asf.xml
deleted file mode 100644
index 3cdb476b28..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/asf.xml
+++ /dev/null
@@ -1,70 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage_keyboard.example.avr8">

-		<require idref="lufa.demos.device.class.mass_storage_keyboard"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage_keyboard.example.xmega">

-		<require idref="lufa.demos.device.class.mass_storage_keyboard"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.mass_storage_keyboard" caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Mass Storage and Keyboard device demo, implementing a basic USB storage disk using a Dataflash memory IC, and a basic HID keyboard. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-			<keyword value="Mass Storage Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MassStorageKeyboard.txt"/>

-

-		<build type="c-source" value="MassStorageKeyboard.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="c-source" value="Lib/DataflashManager.c"/>

-		<build type="c-source" value="Lib/SCSI.c"/>

-		<build type="header-file" value="MassStorageKeyboard.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="header-file" value="Lib/DataflashManager.h"/>

-		<build type="header-file" value="Lib/SCSI.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-		<require idref="lufa.drivers.board.joystick"/>

-		<require idref="lufa.drivers.board.dataflash"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/doxyfile
deleted file mode 100644
index 6259b2f88b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Combined Mass Storage and Keyboard Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
deleted file mode 100644
index d5885d44bd..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MassStorageKeyboard
-SRC          = $(TARGET).c Descriptors.c Lib/DataflashManager.c Lib/SCSI.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Config/LUFAConfig.h
deleted file mode 100644
index c6542445da..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               1
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Descriptors.c
deleted file mode 100644
index c810ab5273..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Descriptors.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
-{
-	/* Use the HID class driver's standard Mouse report.
-	 *   Min X/Y Axis values: -1
-	 *   Max X/Y Axis values:  1
-	 *   Min physical X/Y Axis values (used to determine resolution): -1
-	 *   Max physical X/Y Axis values (used to determine resolution):  1
-	 *   Buttons: 3
-	 *   Absolute screen coordinates: false
-	 */
-	HID_DESCRIPTOR_MOUSE(-1, 1, -1, 1, 3, false)
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2041,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.HID_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Mouse,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_BootSubclass,
-			.Protocol               = HID_CSCP_MouseBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_MouseHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(MouseReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MOUSE_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MOUSE_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mouse Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_MouseHID;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case HID_DTYPE_Report:
-			Address = &MouseReport;
-			Size    = sizeof(MouseReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Descriptors.h
deleted file mode 100644
index 40646b1047..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Descriptors.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-	/* Macros: */
-		/** Endpoint address of the Mouse HID reporting IN endpoint. */
-		#define MOUSE_EPADDR              (ENDPOINT_DIR_IN | 1)
-
-		/** Size in bytes of the Mouse HID reporting IN endpoint. */
-		#define MOUSE_EPSIZE              8
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Mouse HID Interface
-			USB_Descriptor_Interface_t            HID_Interface;
-			USB_HID_Descriptor_HID_t              HID_MouseHID;
-			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_Mouse = 0, /**< Mouse interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Mouse.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Mouse.c
deleted file mode 100644
index f326423bc3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Mouse.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the Mouse demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "Mouse.h"
-
-/** Buffer to hold the previously generated Mouse HID report, for comparison purposes inside the HID class driver. */
-static uint8_t PrevMouseHIDReportBuffer[sizeof(USB_MouseReport_Data_t)];
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Device_t Mouse_HID_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber              = INTERFACE_ID_Mouse,
-				.ReportINEndpoint             =
-					{
-						.Address              = MOUSE_EPADDR,
-						.Size                 = MOUSE_EPSIZE,
-						.Banks                = 1,
-					},
-				.PrevReportINBuffer           = PrevMouseHIDReportBuffer,
-				.PrevReportINBufferSize       = sizeof(PrevMouseHIDReportBuffer),
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		HID_Device_USBTask(&Mouse_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	Buttons_Init();
-	USB_Init();
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Mouse_HID_Interface);
-
-	USB_Device_EnableSOFEvents();
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	HID_Device_ProcessControlRequest(&Mouse_HID_Interface);
-}
-
-/** Event handler for the USB device Start Of Frame event. */
-void EVENT_USB_Device_StartOfFrame(void)
-{
-	HID_Device_MillisecondElapsed(&Mouse_HID_Interface);
-}
-
-/** HID class driver callback function for the creation of HID reports to the host.
- *
- *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
- *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
- *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
- *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
- *
- *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
- */
-bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                         uint8_t* const ReportID,
-                                         const uint8_t ReportType,
-                                         void* ReportData,
-                                         uint16_t* const ReportSize)
-{
-	USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData;
-
-	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
-	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
-
-	if (JoyStatus_LCL & JOY_UP)
-	  MouseReport->Y = -1;
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  MouseReport->Y =  1;
-
-	if (JoyStatus_LCL & JOY_LEFT)
-	  MouseReport->X = -1;
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  MouseReport->X =  1;
-
-	if (JoyStatus_LCL & JOY_PRESS)
-	  MouseReport->Button |= (1 << 0);
-
-	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
-	  MouseReport->Button |= (1 << 1);
-
-	*ReportSize = sizeof(USB_MouseReport_Data_t);
-	return true;
-}
-
-/** HID class driver callback function for the processing of HID reports from the host.
- *
- *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in] ReportID    Report ID of the received report from the host
- *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
- *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
- *  \param[in] ReportSize  Size in bytes of the received HID report
- */
-void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                          const uint8_t ReportID,
-                                          const uint8_t ReportType,
-                                          const void* ReportData,
-                                          const uint16_t ReportSize)
-{
-	// Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Mouse.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Mouse.h
deleted file mode 100644
index 32fd46cd90..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Mouse.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Mouse.c.
- */
-
-#ifndef _MOUSE_H_
-#define _MOUSE_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/interrupt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                         uint8_t* const ReportID,
-		                                         const uint8_t ReportType,
-		                                         void* ReportData,
-		                                         uint16_t* const ReportSize);
-		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                          const uint8_t ReportID,
-		                                          const uint8_t ReportType,
-		                                          const void* ReportData,
-		                                          const uint16_t ReportSize);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Mouse.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Mouse.txt
deleted file mode 100644
index e4673aeaa9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/Mouse.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Mouse Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Mouse Subclass</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Mouse demonstration application. This gives a simple reference
- *  application for implementing a USB Mouse using the basic USB HID
- *  drivers in all modern OSes (i.e. no special drivers required). It is
- *  boot protocol compatible, and thus works under compatible BIOS as if
- *  it was a native mouse (e.g. PS/2).
- *
- *  On start-up the system will automatically enumerate and function
- *  as a mouse when the USB connection to a host is present. To use
- *  the mouse, move the joystick to move the pointer, and push the
- *  joystick inwards to simulate a left-button click. The HWB serves as
- *  the right mouse button.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/asf.xml
deleted file mode 100644
index 1af0d76671..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/asf.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mouse.example.avr8">

-		<require idref="lufa.demos.device.class.mouse"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mouse.example.xmega">

-		<require idref="lufa.demos.device.class.mouse"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.mouse" caption="Mouse HID Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Mouse device demo, implementing a basic USB mouse device that can send movement information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="Mouse.txt"/>

-

-		<build type="c-source" value="Mouse.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Mouse.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-		<require idref="lufa.drivers.board.joystick"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/doxyfile
deleted file mode 100644
index 150171c065..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Mouse Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/makefile
deleted file mode 100644
index 6d9df2a610..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/Mouse/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = Mouse
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Config/AppConfig.h
deleted file mode 100644
index 92a4f818e7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Config/AppConfig.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define CLIENT_IP_ADDRESS                { 10,     0,    0,    1}
-	#define SERVER_IP_ADDRESS                { 10,     0,    0,    2}
-
-	#define ADAPTER_MAC_ADDRESS              {0x02, 0x00, 0x02, 0x00, 0x02, 0x00}
-	#define SERVER_MAC_ADDRESS               {0x00, 0x01, 0x00, 0x01, 0x00, 0x01}
-
-	#define NO_DECODE_ETHERNET
-	#define NO_DECODE_ARP
-	#define NO_DECODE_IP
-	#define NO_DECODE_ICMP
-	#define NO_DECODE_TCP
-	#define NO_DECODE_UDP
-	#define NO_DECODE_DHCP
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Config/LUFAConfig.h
deleted file mode 100644
index fa03979109..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               3
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c
deleted file mode 100644
index cab6717f9c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = CDC_CSCP_CDCClass,
-	.SubClass               = CDC_CSCP_NoSpecificSubclass,
-	.Protocol               = CDC_CSCP_NoSpecificProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x204C,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 2,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.CDC_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_VendorSpecificProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x00,
-		},
-
-	.CDC_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
-		},
-
-	.CDC_NotificationEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.RNDIS_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.RNDIS_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA RNDIS CDC Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h
deleted file mode 100644
index 4ac270fc87..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the CDC device-to-host data IN endpoint. */
-		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 1)
-
-		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
-		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 2)
-
-		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPSIZE        8
-
-		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                64
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// RNDIS CDC Control Interface
-			USB_Descriptor_Interface_t            CDC_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t CDC_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t    CDC_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t  CDC_Functional_Union;
-			USB_Descriptor_Endpoint_t             CDC_NotificationEndpoint;
-
-			// RNDIS CDC Data Interface
-			USB_Descriptor_Interface_t            CDC_DCI_Interface;
-			USB_Descriptor_Endpoint_t             RNDIS_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t             RNDIS_DataInEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
-			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/LUFA RNDIS.inf b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/LUFA RNDIS.inf
deleted file mode 100644
index f34e55f995..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/LUFA RNDIS.inf
+++ /dev/null
@@ -1,59 +0,0 @@
-;     Windows LUFA RNDIS Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-[DefaultInstall]
-CopyINF="LUFA RNDIS.inf"
-
-[Version]
-Signature="$Windows NT$"
-Class=Net
-ClassGuid={4d36e972-e325-11ce-bfc1-08002be10318}
-Provider=%MFGNAME%
-DriverVer=7/1/2012,10.0.0.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
-
-[ControlFlags]
-ExcludeFromSelect=*
-
-[DriverInstall]
-Characteristics=0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType=15
-include=netrndis.inf
-needs=Usb_Rndis.ndi
-AddReg=Rndis_AddReg_Vista
-
-[DriverInstall.Services]
-include=netrndis.inf
-needs=Usb_Rndis.ndi.Services
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
-
-[DeviceList.NTx86]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
-
-[DeviceList.NTia64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGNAME="http://www.lufa-lib.org"
-DESCRIPTION="LUFA USB RNDIS Demo"
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c
deleted file mode 100644
index 6aaf0edd46..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Address Resolution Protocol (ARP) packet handling routines. This protocol handles the
- *  conversion of physical MAC addresses to protocol IP addresses between the host and the
- *  device.
- */
-
-#include "ARP.h"
-
-/** Processes an ARP packet inside an Ethernet frame, and writes the appropriate response
- *  to the output Ethernet frame if the host is requesting the IP or MAC address of the
- *  virtual server device on the network.
- *
- *  \param[in] InDataStart   Pointer to the start of the incoming packet's ARP header
- *  \param[out] OutDataStart  Pointer to the start of the outgoing packet's ARP header
- *
- *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
- */
-int16_t ARP_ProcessARPPacket(void* InDataStart,
-                             void* OutDataStart)
-{
-	DecodeARPHeader(InDataStart);
-
-	ARP_Header_t* ARPHeaderIN  = (ARP_Header_t*)InDataStart;
-	ARP_Header_t* ARPHeaderOUT = (ARP_Header_t*)OutDataStart;
-
-	/* Ensure that the ARP request is a IPv4 request packet */
-	if ((SwapEndian_16(ARPHeaderIN->ProtocolType) == ETHERTYPE_IPV4) &&
-	    (SwapEndian_16(ARPHeaderIN->Operation) == ARP_OPERATION_REQUEST))
-	{
-		/* If the ARP packet is requesting the MAC or IP of the virtual webserver, return the response */
-		if (IP_COMPARE(&ARPHeaderIN->TPA, &ServerIPAddress) ||
-		    MAC_COMPARE(&ARPHeaderIN->THA, &ServerMACAddress))
-		{
-			/* Fill out the ARP response header */
-			ARPHeaderOUT->HardwareType = ARPHeaderIN->HardwareType;
-			ARPHeaderOUT->ProtocolType = ARPHeaderIN->ProtocolType;
-			ARPHeaderOUT->HLEN         = ARPHeaderIN->HLEN;
-			ARPHeaderOUT->PLEN         = ARPHeaderIN->PLEN;
-			ARPHeaderOUT->Operation    = SwapEndian_16(ARP_OPERATION_REPLY);
-
-			/* Copy over the sender MAC/IP to the target fields for the response */
-			ARPHeaderOUT->THA = ARPHeaderIN->SHA;
-			ARPHeaderOUT->TPA = ARPHeaderIN->SPA;
-
-			/* Copy over the new sender MAC/IP - MAC and IP addresses of the virtual webserver */
-			ARPHeaderOUT->SHA = ServerMACAddress;
-			ARPHeaderOUT->SPA = ServerIPAddress;
-
-			/* Return the size of the response so far */
-			return sizeof(ARP_Header_t);
-		}
-	}
-
-	return NO_RESPONSE;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h
deleted file mode 100644
index 8535b85454..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ARP.c.
- */
-
-#ifndef _ARP_H_
-#define _ARP_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <string.h>
-
-		#include "EthernetProtocols.h"
-		#include "Ethernet.h"
-		#include "ProtocolDecoders.h"
-
-	/* Macros: */
-		/** ARP header operation constant, indicating a request from a host for an address translation. */
-		#define ARP_OPERATION_REQUEST            1
-
-		/** ARP header operation constant, indicating a reply from a host giving an address translation. */
-		#define ARP_OPERATION_REPLY              2
-
-	/* Type Defines: */
-		/** Type define for an ARP packet inside an Ethernet frame. */
-		typedef struct
-		{
-			uint16_t      HardwareType; /**< Hardware type constant, indicating the hardware used */
-			uint16_t      ProtocolType; /**< Protocol being resolved, usually ETHERTYPE_IPV4 */
-
-			uint8_t       HLEN; /**< Length in bytes of the source/destination hardware addresses */
-			uint8_t       PLEN; /**< Length in bytes of the source/destination protocol addresses */
-			uint16_t      Operation; /**< Type of operation, either ARP_OPERATION_REQUEST or ARP_OPERATION_REPLY */
-
-			MAC_Address_t SHA; /**< Sender's hardware address */
-			IP_Address_t  SPA; /**< Sender's protocol address */
-			MAC_Address_t THA; /**< Target's hardware address */
-			IP_Address_t  TPA; /**< Target's protocol address */
-		} ARP_Header_t;
-
-	/* Function Prototypes: */
-		int16_t ARP_ProcessARPPacket(void* InDataStart,
-		                             void* OutDataStart);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c
deleted file mode 100644
index b3b5d6943b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Dynamic Host Configuration Protocol (DHCP) packet handling routines. This protocol
- *  handles the automatic IP negotiation to the host, so that the host will use the provided
- *  IP address given to it by the device.
- */
-
-#include "DHCP.h"
-
-/** Processes a DHCP packet inside an Ethernet frame, and writes the appropriate response
- *  to the output Ethernet frame if the host is requesting or accepting an IP address.
- *
- *  \param[in] IPHeaderInStart     Pointer to the start of the incoming packet's IP header
- *  \param[in] DHCPHeaderInStart   Pointer to the start of the incoming packet's DHCP header
- *  \param[out] DHCPHeaderOutStart  Pointer to the start of the outgoing packet's DHCP header
- *
- *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
- */
-int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart,
-                               void* DHCPHeaderInStart,
-                               void* DHCPHeaderOutStart)
-{
-	IP_Header_t*   IPHeaderIN    = (IP_Header_t*)IPHeaderInStart;
-	DHCP_Header_t* DHCPHeaderIN  = (DHCP_Header_t*)DHCPHeaderInStart;
-	DHCP_Header_t* DHCPHeaderOUT = (DHCP_Header_t*)DHCPHeaderOutStart;
-
-	uint8_t* DHCPOptionsINStart  = ((uint8_t*)DHCPHeaderInStart  + sizeof(DHCP_Header_t));
-	uint8_t* DHCPOptionsOUTStart = ((uint8_t*)DHCPHeaderOutStart + sizeof(DHCP_Header_t));
-
-	DecodeDHCPHeader(DHCPHeaderInStart);
-
-	/* Zero out the response DHCP packet, as much of it is legacy and left at 0 */
-	memset(DHCPHeaderOUT, 0, sizeof(DHCP_Header_t));
-
-	/* Fill out the response DHCP packet */
-	DHCPHeaderOUT->HardwareType          = DHCPHeaderIN->HardwareType;
-	DHCPHeaderOUT->Operation             = DHCP_OP_BOOTREPLY;
-	DHCPHeaderOUT->HardwareAddressLength = DHCPHeaderIN->HardwareAddressLength;
-	DHCPHeaderOUT->Hops                  = 0;
-	DHCPHeaderOUT->TransactionID         = DHCPHeaderIN->TransactionID;
-	DHCPHeaderOUT->ElapsedSeconds        = 0;
-	DHCPHeaderOUT->Flags                 = DHCPHeaderIN->Flags;
-	DHCPHeaderOUT->YourIP                = ClientIPAddress;
-	memmove(&DHCPHeaderOUT->ClientHardwareAddress, &DHCPHeaderIN->ClientHardwareAddress, sizeof(MAC_Address_t));
-	DHCPHeaderOUT->Cookie                = SwapEndian_32(DHCP_MAGIC_COOKIE);
-
-	/* Alter the incoming IP packet header so that the corrected IP source and destinations are used - this means that
-	   when the response IP header is generated, it will use the corrected addresses and not the null/broatcast addresses */
-	IPHeaderIN->SourceAddress      = ClientIPAddress;
-	IPHeaderIN->DestinationAddress = ServerIPAddress;
-
-	/* Process the incoming DHCP packet options */
-	while (DHCPOptionsINStart[0] != DHCP_OPTION_END)
-	{
-		/* Find the Message Type DHCP option, to determine the type of DHCP packet */
-		if (DHCPOptionsINStart[0] == DHCP_OPTION_MESSAGETYPE)
-		{
-			if ((DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_DISCOVER) || (DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_REQUEST))
-			{
-				/* Fill out the response DHCP packet options for a DHCP OFFER or ACK response */
-
-				*(DHCPOptionsOUTStart++) = DHCP_OPTION_MESSAGETYPE;
-				*(DHCPOptionsOUTStart++) = 1;
-				*(DHCPOptionsOUTStart++) = (DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_DISCOVER) ? DHCP_MESSAGETYPE_OFFER
-																								: DHCP_MESSAGETYPE_ACK;
-
-				*(DHCPOptionsOUTStart++) = DHCP_OPTION_SUBNETMASK;
-				*(DHCPOptionsOUTStart++) = 4;
-				*(DHCPOptionsOUTStart++) = 0xFF;
-				*(DHCPOptionsOUTStart++) = 0xFF;
-				*(DHCPOptionsOUTStart++) = 0xFF;
-				*(DHCPOptionsOUTStart++) = 0x00;
-
-				*(DHCPOptionsOUTStart++) = DHCP_OPTION_DHCPSERVER;
-				*(DHCPOptionsOUTStart++) = sizeof(IP_Address_t);
-				memcpy(DHCPOptionsOUTStart, &ServerIPAddress, sizeof(IP_Address_t));
-				DHCPOptionsOUTStart     += sizeof(IP_Address_t);
-
-				*(DHCPOptionsOUTStart++) = DHCP_OPTION_END;
-
-				return (sizeof(DHCP_Header_t) + 12 + sizeof(IP_Address_t));
-			}
-		}
-
-		/* Go to the next DHCP option - skip one byte if option is a padding byte, else skip the complete option's size */
-		DHCPOptionsINStart += ((DHCPOptionsINStart[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptionsINStart[1] + 2));
-	}
-
-	return NO_RESPONSE;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h
deleted file mode 100644
index 2d57397de9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DHCP.c.
- */
-
-#ifndef _DHCP_H_
-#define _DHCP_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <string.h>
-
-		#include "EthernetProtocols.h"
-		#include "Ethernet.h"
-		#include "ProtocolDecoders.h"
-
-	/* Macros: */
-		/** DHCP operation constant, indicating a request from a host to a DHCP server. */
-		#define DHCP_OP_BOOTREQUEST       0x01
-
-		/** DHCP operation constant, indicating a reply from a DHCP server to a host. */
-		#define DHCP_OP_BOOTREPLY         0x02
-
-		/** Hardware type constant, indicating Ethernet as a carrier. */
-		#define DHCP_HTYPE_ETHERNET       0x01
-
-		/** Magic boot protocol "cookie", inserted into all BOOTP packets (BOOTP is the carrier of DHCP). */
-		#define DHCP_MAGIC_COOKIE         0x63825363
-
-		/** DHCP option list entry header, indicating that a subnet mask will follow. */
-		#define DHCP_OPTION_SUBNETMASK    1
-
-		/** DHCP option list entry header, indicating that the DHCP message type constant will follow. */
-		#define DHCP_OPTION_MESSAGETYPE   53
-
-		/** DHCP option list entry header, indicating that the IP address of the DHCP server will follow. */
-		#define DHCP_OPTION_DHCPSERVER    54
-
-		/** DHCP option list entry header, used to pad out option data. */
-		#define DHCP_OPTION_PAD           0
-
-		/** DHCP option list entry header, indicating the end of option data. */
-		#define DHCP_OPTION_END           255
-
-		/** Message type constant, used in the DHCP option data field, requesting that a DHCP server offer an IP address. */
-		#define DHCP_MESSAGETYPE_DISCOVER 1
-
-		/** Message type constant, used in the DHCP option data field, indicating that a DHCP server is offering an IP address. */
-		#define DHCP_MESSAGETYPE_OFFER    2
-
-		/** Message type constant, used in the DHCP option data field, requesting that a DHCP server lease a given IP address. */
-		#define DHCP_MESSAGETYPE_REQUEST  3
-
-		/** Message type constant, used in the DHCP option data field, declining an offered DHCP server IP address lease. */
-		#define DHCP_MESSAGETYPE_DECLINE  4
-
-		/** Message type constant, used in the DHCP option data field, ACKing a host IP lease request. */
-		#define DHCP_MESSAGETYPE_ACK      5
-
-		/** Message type constant, used in the DHCP option data field, NACKing a host IP lease request. */
-		#define DHCP_MESSAGETYPE_NACK     6
-
-		/** Message type constant, used in the DHCP option data field, indicating that a host is releasing a leased IP address. */
-		#define DHCP_MESSAGETYPE_RELEASE  7
-
-	/* Type Defines: */
-		/** Type define for a DHCP packet inside an Ethernet frame. */
-		typedef struct
-		{
-			uint8_t  Operation; /**< DHCP operation, either DHCP_OP_BOOTREQUEST or DHCP_OP_BOOTREPLY */
-			uint8_t  HardwareType; /**< Hardware carrier type constant */
-			uint8_t  HardwareAddressLength;  /**< Length in bytes of a hardware (MAC) address on the network */
-			uint8_t  Hops; /**< Number of hops required to reach the server, unused */
-
-			uint32_t TransactionID; /**< Unique ID of the DHCP packet, for positive matching between sent and received packets */
-
-			uint16_t ElapsedSeconds; /**< Elapsed seconds since the request was made */
-			uint16_t Flags; /**< BOOTP packet flags */
-
-			IP_Address_t ClientIP; /**< Client IP address, if already leased an IP */
-			IP_Address_t YourIP; /**< Client IP address */
-			IP_Address_t NextServerIP; /**< Legacy BOOTP protocol field, unused for DHCP */
-			IP_Address_t RelayAgentIP; /**< Legacy BOOTP protocol field, unused for DHCP */
-
-			uint8_t ClientHardwareAddress[16]; /**< Hardware (MAC) address of the client making a request to the DHCP server */
-			uint8_t ServerHostnameString[64]; /**< Legacy BOOTP protocol field, unused for DHCP */
-			uint8_t BootFileName[128]; /**< Legacy BOOTP protocol field, unused for DHCP */
-
-			uint32_t Cookie; /**< Magic BOOTP protocol cookie to indicate a valid packet */
-		} DHCP_Header_t;
-
-	/* Function Prototypes: */
-		int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart,
-		                               void* DHCPHeaderInStart,
-		                               void* DHCPHeaderOutStart);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c
deleted file mode 100644
index 6760395374..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Ethernet frame packet handling routines. This protocol handles the processing of raw Ethernet
- *  frames sent and received, deferring the processing of sub-packet protocols to the appropriate
- *  protocol handlers, such as DHCP or ARP.
- */
-
-#include "Ethernet.h"
-
-/** Constant for convenience when checking against or setting a MAC address to the virtual server MAC address. */
-const MAC_Address_t ServerMACAddress    = {SERVER_MAC_ADDRESS};
-
-/** Constant for convenience when checking against or setting an IP address to the virtual server IP address. */
-const IP_Address_t  ServerIPAddress     = {SERVER_IP_ADDRESS};
-
-/** Constant for convenience when checking against or setting a MAC address to the broadcast MAC address. */
-const MAC_Address_t BroadcastMACAddress = {BROADCAST_MAC_ADDRESS};
-
-/** Constant for convenience when checking against or setting a IP address to the broadcast IP address. */
-const IP_Address_t  BroadcastIPAddress  = {BROADCAST_IP_ADDRESS};
-
-/** Constant for convenience when checking against or setting an IP address to the client (host) IP address. */
-const IP_Address_t  ClientIPAddress     = {CLIENT_IP_ADDRESS};
-
-
-/** Processes an incoming Ethernet frame, and writes the appropriate response to the output Ethernet
- *  frame buffer if the sub protocol handlers create a valid response.
- */
-void Ethernet_ProcessPacket(Ethernet_Frame_Info_t* const FrameIN,
-                            Ethernet_Frame_Info_t* const FrameOUT)
-{
-	DecodeEthernetFrameHeader(FrameIN->FrameData);
-
-	/* Cast the incoming Ethernet frame to the Ethernet header type */
-	Ethernet_Frame_Header_t* FrameINHeader  = (Ethernet_Frame_Header_t*)&FrameIN->FrameData;
-	Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT->FrameData;
-
-	int16_t                  RetSize        = NO_RESPONSE;
-
-	/* Ensure frame is addressed to either all (broadcast) or the virtual webserver, and is a type II frame */
-	if ((MAC_COMPARE(&FrameINHeader->Destination, &ServerMACAddress) ||
-	     MAC_COMPARE(&FrameINHeader->Destination, &BroadcastMACAddress)) &&
-		 (SwapEndian_16(FrameIN->FrameLength) > ETHERNET_VER2_MINSIZE))
-	{
-		/* Process the packet depending on its protocol */
-		switch (SwapEndian_16(FrameINHeader->EtherType))
-		{
-			case ETHERTYPE_ARP:
-				RetSize = ARP_ProcessARPPacket(&FrameIN->FrameData[sizeof(Ethernet_Frame_Header_t)],
-				                               &FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t)]);
-				break;
-			case ETHERTYPE_IPV4:
-				RetSize = IP_ProcessIPPacket(FrameIN,
-				                             &FrameIN->FrameData[sizeof(Ethernet_Frame_Header_t)],
-				                             &FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t)]);
-				break;
-		}
-
-		/* Protocol processing routine has filled a response, complete the ethernet frame header */
-		if (RetSize > 0)
-		{
-			/* Fill out the response Ethernet frame header */
-			FrameOUTHeader->Source          = ServerMACAddress;
-			FrameOUTHeader->Destination     = FrameINHeader->Source;
-			FrameOUTHeader->EtherType       = FrameINHeader->EtherType;
-
-			/* Set the response length in the buffer and indicate that a response is ready to be sent */
-			FrameOUT->FrameLength           = (sizeof(Ethernet_Frame_Header_t) + RetSize);
-		}
-	}
-
-	/* Check if the packet was processed */
-	if (RetSize != NO_PROCESS)
-	{
-		/* Clear the frame buffer */
-		FrameIN->FrameLength = 0;
-	}
-}
-
-/** Calculates the appropriate ethernet checksum, consisting of the addition of the one's
- *  compliment of each word, complimented.
- *
- *  \param[in] Data   Pointer to the packet buffer data whose checksum must be calculated
- *  \param[in] Bytes  Number of bytes in the data buffer to process
- *
- *  \return A 16-bit Ethernet checksum value
- */
-uint16_t Ethernet_Checksum16(void* Data,
-                             uint16_t Bytes)
-{
-	uint16_t* Words    = (uint16_t*)Data;
-	uint32_t  Checksum = 0;
-
-	for (uint16_t CurrWord = 0; CurrWord < (Bytes >> 1); CurrWord++)
-	  Checksum += Words[CurrWord];
-
-	while (Checksum & 0xFFFF0000)
-	  Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16));
-
-	return ~Checksum;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h
deleted file mode 100644
index 6de4a90cb7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Ethernet.c.
- */
-
-#ifndef _ETHERNET_H_
-#define _ETHERNET_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <string.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "Config/AppConfig.h"
-
-		#include "EthernetProtocols.h"
-		#include "ProtocolDecoders.h"
-		#include "ICMP.h"
-		#include "TCP.h"
-		#include "UDP.h"
-		#include "DHCP.h"
-		#include "ARP.h"
-		#include "IP.h"
-
-	/* Macros: */
-		/** Physical MAC address of the network broadcast address. */
-		#define BROADCAST_MAC_ADDRESS            {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}
-
-		/** Performs a comparison between two MAC addresses, indicating if they are identical.
-		 *
-		 *  \param[in] MAC1  First MAC address
-		 *  \param[in] MAC2  Second MAC address
-		 *
-		 *  \return True if the addresses match, \c false otherwise
-		 */
-		#define MAC_COMPARE(MAC1, MAC2)          (memcmp(MAC1, MAC2, sizeof(MAC_Address_t)) == 0)
-
-		/** Minimum size of an Ethernet packet in bytes, to conform to the Ethernet V2 packet standard. */
-		#define ETHERNET_VER2_MINSIZE            0x0600
-
-		/** Return value for all sub protocol handling routines, indicating that no response packet has been generated. */
-		#define NO_RESPONSE                      0
-
-		/** Return value for all sub protocol handling routines, indicating that the packet has not yet been handled. */
-		#define NO_PROCESS                       -1
-
-	/* Type Defines: */
-		/** Type define for an Ethernet frame header. */
-		typedef struct
-		{
-			MAC_Address_t Destination; /**< Physical MAC address of the packet recipient */
-			MAC_Address_t Source; /**< Physics MAC address of the packet source */
-			uint16_t      EtherType; /**< Ethernet packet sub-protocol type, for Ethernet V2 packets */
-		} Ethernet_Frame_Header_t;
-
-	/* External Variables: */
-		extern const MAC_Address_t ServerMACAddress;
-		extern const IP_Address_t  ServerIPAddress;
-		extern const MAC_Address_t BroadcastMACAddress;
-		extern const IP_Address_t  BroadcastIPAddress;
-		extern const IP_Address_t  ClientIPAddress;
-
-	/* Function Prototypes: */
-		void     Ethernet_ProcessPacket(Ethernet_Frame_Info_t* const FrameIN,
-		                                Ethernet_Frame_Info_t* const FrameOUT);
-		uint16_t Ethernet_Checksum16(void* Data,
-		                             uint16_t Bytes);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h
deleted file mode 100644
index 9db58d5de7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  General Ethernet protocol constants and type defines, for use by
- *  all network protocol portions of the TCP/IP stack.
- */
-
-#ifndef _ETHERNET_PROTOCOLS_H_
-#define _ETHERNET_PROTOCOLS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Macros: */
-		#define ETHERTYPE_IPV4                   0x0800
-		#define ETHERTYPE_ARP                    0x0806
-		#define ETHERTYPE_RARP                   0x8035
-		#define ETHERTYPE_APPLETALK              0x809b
-		#define ETHERTYPE_APPLETALKARP           0x80f3
-		#define ETHERTYPE_IEEE8021Q              0x8100
-		#define ETHERTYPE_NOVELLIPX              0x8137
-		#define ETHERTYPE_NOVELL                 0x8138
-		#define ETHERTYPE_IPV6                   0x86DD
-		#define ETHERTYPE_COBRANET               0x8819
-		#define ETHERTYPE_PROVIDERBRIDGING       0x88a8
-		#define ETHERTYPE_MPLSUNICAST            0x8847
-		#define ETHERTYPE_MPLSMULTICAST          0x8848
-		#define ETHERTYPE_PPPoEDISCOVERY         0x8863
-		#define ETHERTYPE_PPPoESESSION           0x8864
-		#define ETHERTYPE_EAPOVERLAN             0x888E
-		#define ETHERTYPE_HYPERSCSI              0x889A
-		#define ETHERTYPE_ATAOVERETHERNET        0x88A2
-		#define ETHERTYPE_ETHERCAT               0x88A4
-		#define ETHERTYPE_SERCOSIII              0x88CD
-		#define ETHERTYPE_CESoE                  0x88D8
-		#define ETHERTYPE_MACSECURITY            0x88E5
-		#define ETHERTYPE_FIBRECHANNEL           0x8906
-		#define ETHERTYPE_QINQ                   0x9100
-		#define ETHERTYPE_VLLT                   0xCAFE
-
-		#define PROTOCOL_ICMP                    1
-		#define PROTOCOL_IGMP                    2
-		#define PROTOCOL_TCP                     6
-		#define PROTOCOL_UDP                     17
-		#define PROTOCOL_OSPF                    89
-		#define PROTOCOL_SCTP                    132
-
-	/* Type Defines: */
-		/** Type define for an Ethernet frame buffer data and information structure. */
-		typedef struct
-		{
-			uint8_t  FrameData[ETHERNET_FRAME_SIZE_MAX]; /**< Ethernet frame contents. */
-			uint16_t FrameLength; /**< Length in bytes of the Ethernet frame stored in the buffer. */
-		} Ethernet_Frame_Info_t;
-
-		/** Type define for a protocol IP address of a device on a network. */
-		typedef struct
-		{
-			uint8_t  Octets[4]; /**< Individual bytes of an IP address */
-		} IP_Address_t;
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c
deleted file mode 100644
index 20a7b709dc..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Internet Control Message Protocol (ICMP) packet handling routines. This protocol handles
- *  Echo requests from the host, to indicate a successful network connection between the host
- *  and the virtual server.
- */
-
-#include "ICMP.h"
-
-/** Processes an ICMP packet inside an Ethernet frame, and writes the appropriate response
- *  to the output Ethernet frame if the host is issuing a ICMP ECHO request.
- *
- *  \param[in] FrameIN        Pointer to the incoming Ethernet frame information structure
- *  \param[in] InDataStart    Pointer to the start of the incoming packet's ICMP header
- *  \param[out] OutDataStart  Pointer to the start of the outgoing packet's ICMP header
- *
- *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
- */
-int16_t ICMP_ProcessICMPPacket(Ethernet_Frame_Info_t* const FrameIN,
-                               void* InDataStart,
-                               void* OutDataStart)
-{
-	ICMP_Header_t* ICMPHeaderIN  = (ICMP_Header_t*)InDataStart;
-	ICMP_Header_t* ICMPHeaderOUT = (ICMP_Header_t*)OutDataStart;
-
-	DecodeICMPHeader(InDataStart);
-
-	/* Determine if the ICMP packet is an echo request (ping) */
-	if (ICMPHeaderIN->Type == ICMP_TYPE_ECHOREQUEST)
-	{
-		/* Fill out the ICMP response packet */
-		ICMPHeaderOUT->Type     = ICMP_TYPE_ECHOREPLY;
-		ICMPHeaderOUT->Code     = 0;
-		ICMPHeaderOUT->Checksum = 0;
-		ICMPHeaderOUT->Id       = ICMPHeaderIN->Id;
-		ICMPHeaderOUT->Sequence = ICMPHeaderIN->Sequence;
-
-		intptr_t DataSize = FrameIN->FrameLength - ((((intptr_t)InDataStart + sizeof(ICMP_Header_t)) - (intptr_t)FrameIN->FrameData));
-
-		/* Copy the remaining payload to the response - echo requests should echo back any sent data */
-		memmove(&((uint8_t*)OutDataStart)[sizeof(ICMP_Header_t)],
-		        &((uint8_t*)InDataStart)[sizeof(ICMP_Header_t)],
-			    DataSize);
-
-		ICMPHeaderOUT->Checksum = Ethernet_Checksum16(ICMPHeaderOUT, (DataSize + sizeof(ICMP_Header_t)));
-
-		/* Return the size of the response so far */
-		return (DataSize + sizeof(ICMP_Header_t));
-	}
-
-	return NO_RESPONSE;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h
deleted file mode 100644
index 0226d35ca2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ICMP.c.
- */
-
-#ifndef _ICMP_H_
-#define _ICMP_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <string.h>
-
-		#include "EthernetProtocols.h"
-		#include "Ethernet.h"
-		#include "ProtocolDecoders.h"
-
-	/* Macros: */
-		/** ICMP message type constant, indicating an ICMP ECHO Reply message. */
-		#define ICMP_TYPE_ECHOREPLY              0
-
-		/** ICMP message type constant, indicating a packet destination is unreachable. */
-		#define ICMP_TYPE_DESTINATIONUNREACHABLE 3
-
-		/** ICMP message type constant, indicating an ICMP Source Quench message. */
-		#define ICMP_TYPE_SOURCEQUENCH           4
-
-		/** ICMP message type constant, indicating an ICMP Redirect message. */
-		#define ICMP_TYPE_REDIRECTMESSAGE        5
-
-		/** ICMP message type constant, indicating an ICMP ECHO Request message. */
-		#define ICMP_TYPE_ECHOREQUEST            8
-
-		/** ICMP message type constant, indicating an ICMP Time Exceeded message. */
-		#define ICMP_TYPE_TIMEEXCEEDED           11
-
-	/* Type Defines: */
-		/** Type define for an ICMP message header. */
-		typedef struct
-		{
-			uint8_t       Type; /**< ICMP message type, an \c ICMP_TYPE_* constant */
-			uint8_t       Code; /**< ICMP message code, indicating the message value */
-			uint16_t      Checksum; /**< Ethernet checksum of the ICMP message */
-			uint16_t      Id; /**< Id of the ICMP message */
-			uint16_t      Sequence; /**< Sequence number of the ICMP message, to link together message responses */
-		} ICMP_Header_t;
-
-	/* Function Prototypes: */
-		int16_t ICMP_ProcessICMPPacket(Ethernet_Frame_Info_t* const FrameIN,
-		                               void* InDataStart,
-		                               void* OutDataStart);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c
deleted file mode 100644
index 15013ce9dc..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Internet Protocol (IP) packet handling routines. This protocol handles IP packets from the
- *  host which typically encapsulate other protocols such as ICMP, UDP and TCP.
- */
-
-#include "IP.h"
-
-/** Processes an IP packet inside an Ethernet frame, and writes the appropriate response
- *  to the output Ethernet frame if one is created by a sub-protocol handler.
- *
- *  \param[in] FrameIN        Pointer to the incoming Ethernet frame information structure
- *  \param[in] InDataStart    Pointer to the start of the incoming packet's IP header
- *  \param[out] OutDataStart  Pointer to the start of the outgoing packet's IP header
- *
- *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE if no
- *           response was generated, NO_PROCESS if the packet processing was deferred until the
- *           next Ethernet packet handler iteration
- */
-int16_t IP_ProcessIPPacket(Ethernet_Frame_Info_t* const FrameIN,
-                           void* InDataStart,
-                           void* OutDataStart)
-{
-	DecodeIPHeader(InDataStart);
-
-	IP_Header_t* IPHeaderIN  = (IP_Header_t*)InDataStart;
-	IP_Header_t* IPHeaderOUT = (IP_Header_t*)OutDataStart;
-
-	/* Header length is specified in number of longs in the packet header, convert to bytes */
-	uint16_t HeaderLengthBytes = (IPHeaderIN->HeaderLength * sizeof(uint32_t));
-
-	int16_t  RetSize = NO_RESPONSE;
-
-	/* Check to ensure the IP packet is addressed to the virtual webserver's IP or the broadcast IP address */
-	if (!(IP_COMPARE(&IPHeaderIN->DestinationAddress, &ServerIPAddress)) &&
-	    !(IP_COMPARE(&IPHeaderIN->DestinationAddress, &BroadcastIPAddress)))
-	{
-		return NO_RESPONSE;
-	}
-
-	/* Pass off the IP payload to the appropriate protocol processing routine */
-	switch (IPHeaderIN->Protocol)
-	{
-		case PROTOCOL_ICMP:
-			RetSize = ICMP_ProcessICMPPacket(FrameIN,
-			                                 &((uint8_t*)InDataStart)[HeaderLengthBytes],
-			                                 &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]);
-			break;
-		case PROTOCOL_TCP:
-			RetSize = TCP_ProcessTCPPacket(InDataStart,
-			                               &((uint8_t*)InDataStart)[HeaderLengthBytes],
-			                               &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]);
-			break;
-		case PROTOCOL_UDP:
-			RetSize = UDP_ProcessUDPPacket(InDataStart,
-			                               &((uint8_t*)InDataStart)[HeaderLengthBytes],
-			                               &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]);
-			break;
-	}
-
-	/* Check to see if the protocol processing routine has filled out a response */
-	if (RetSize > 0)
-	{
-		/* Fill out the response IP packet header */
-		IPHeaderOUT->TotalLength        = SwapEndian_16(sizeof(IP_Header_t) + RetSize);
-		IPHeaderOUT->TypeOfService      = 0;
-		IPHeaderOUT->HeaderLength       = (sizeof(IP_Header_t) / sizeof(uint32_t));
-		IPHeaderOUT->Version            = 4;
-		IPHeaderOUT->Flags              = 0;
-		IPHeaderOUT->FragmentOffset     = 0;
-		IPHeaderOUT->Identification     = 0;
-		IPHeaderOUT->HeaderChecksum     = 0;
-		IPHeaderOUT->Protocol           = IPHeaderIN->Protocol;
-		IPHeaderOUT->TTL                = DEFAULT_TTL;
-		IPHeaderOUT->SourceAddress      = IPHeaderIN->DestinationAddress;
-		IPHeaderOUT->DestinationAddress = IPHeaderIN->SourceAddress;
-
-		IPHeaderOUT->HeaderChecksum     = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t));
-
-		/* Return the size of the response so far */
-		return (sizeof(IP_Header_t) + RetSize);
-	}
-
-	return RetSize;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h
deleted file mode 100644
index 645d7a9da5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for IP.c.
- */
-
-#ifndef _IP_H_
-#define _IP_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <string.h>
-
-		#include "EthernetProtocols.h"
-		#include "Ethernet.h"
-		#include "ProtocolDecoders.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Protocol IP address of the broadcast address. */
-		#define BROADCAST_IP_ADDRESS             {0xFF, 0xFF, 0xFF, 0xFF}
-
-		/** Default Time To Live (TTL) value for sent packets, indicating the maximum allowable hops until their destination
-		 *  is reached.
-		 */
-		#define DEFAULT_TTL                      128
-
-		/** Performs a comparison between two IP addresses, indicating if they are identical.
-		 *
-		 *  \param[in] IP1  First IP address
-		 *  \param[in] IP2  Second IP address
-		 *
-		 *  \return True if the addresses match, \c false otherwise
-		 */
-		#define IP_COMPARE(IP1, IP2)             (memcmp(IP1, IP2, sizeof(IP_Address_t)) == 0)
-
-	/* Type Defines: */
-		/** Type define of an IP packet header. */
-		typedef struct
-		{
-			unsigned     HeaderLength   : 4; /**< Total length of the packet header, in 4-byte blocks */
-			unsigned     Version        : 4; /**< IP protocol version */
-			uint8_t      TypeOfService; /**< Special service type identifier, indicating delay/throughput/reliability levels */
-			uint16_t     TotalLength; /**< Total length of the IP packet, in bytes */
-
-			uint16_t     Identification; /**< Identification value for identifying fragmented packets */
-			unsigned     FragmentOffset : 13; /**< Offset of this IP fragment */
-			unsigned     Flags          : 3; /**< Fragment flags, to indicate if a packet is fragmented */
-
-			uint8_t      TTL; /**< Maximum allowable number of hops to reach the packet destination */
-			uint8_t      Protocol; /**< Encapsulated protocol type */
-			uint16_t     HeaderChecksum; /**< Ethernet checksum of the IP header */
-
-			IP_Address_t SourceAddress; /**< Source protocol IP address of the packet */
-			IP_Address_t DestinationAddress; /**< Destination protocol IP address of the packet */
-		} IP_Header_t;
-
-	/* Function Prototypes: */
-		int16_t IP_ProcessIPPacket(Ethernet_Frame_Info_t* const FrameIN,
-		                           void* InDataStart,
-		                           void* OutDataStart);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c
deleted file mode 100644
index 47e00a146d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/* Protocol decoders for Ethernet, TCP, IP, ICMP and ARP. Each of these routines
-   accepts a header to the appropriate protocol and prints out pertinent information
-   on the packet through the serial port.
-
-   To disable printing of a specific protocol, define the token NO_DECODE_{Protocol}
-   in the project makefile, and pass it to the compiler using the -D switch.
-*/
-
-/** \file
- *
- *  Protocol decoding routines, for the plain-text decoding of Ethernet frames for debugging purposes.
- *  Enabled protocol decoders will print incoming Ethernet frame contents through the USART in a human
- *  readable format.
- *
- *  Note that the USART is a slow transmission medium, and will slow down packet processing considerably.
- *  Packet decoding routines can be disabled by defining NO_DECODE_{Protocol Name} in the project makefile
- *  and passing it to the compiler via the -D switch.
- */
-
-#include "ProtocolDecoders.h"
-
-/** Decodes an Ethernet frame header and prints its contents to through the USART in a human readable format.
- *
- *  \param[in] InDataStart  Pointer to the start of an Ethernet frame of data
- */
-void DecodeEthernetFrameHeader(void* InDataStart)
-{
-	#if !defined(NO_DECODE_ETHERNET)
-	Ethernet_Frame_Header_t* FrameHeader = (Ethernet_Frame_Header_t*)InDataStart;
-
-	printf_P(PSTR("\r\n"));
-
-	printf_P(PSTR("  ETHERNET\r\n"));
-
-	if (!(MAC_COMPARE(&FrameHeader->Destination, &ServerMACAddress)) &&
-	    !(MAC_COMPARE(&FrameHeader->Destination, &BroadcastMACAddress)))
-	{
-		printf_P(PSTR("  + NOT ADDRESSED TO DEVICE\r\n"));
-		return;
-	}
-
-	printf_P(PSTR("  + MAC Source : %02X:%02X:%02X:%02X:%02X:%02X\r\n"), FrameHeader->Source.Octets[0],
-	                                                                     FrameHeader->Source.Octets[1],
-	                                                                     FrameHeader->Source.Octets[2],
-	                                                                     FrameHeader->Source.Octets[3],
-	                                                                     FrameHeader->Source.Octets[4],
-	                                                                     FrameHeader->Source.Octets[5]);
-
-	printf_P(PSTR("  + MAC Dest: %02X:%02X:%02X:%02X:%02X:%02X\r\n"),    FrameHeader->Destination.Octets[0],
-	                                                                     FrameHeader->Destination.Octets[1],
-	                                                                     FrameHeader->Destination.Octets[2],
-	                                                                     FrameHeader->Destination.Octets[3],
-	                                                                     FrameHeader->Destination.Octets[4],
-	                                                                     FrameHeader->Destination.Octets[5]);
-
-	printf_P(PSTR("  + Protocol: 0x%04x\r\n"), SwapEndian_16(FrameHeader->EtherType));
-	#endif
-}
-
-/** Decodes an ARP header and prints its contents to through the USART in a human readable format.
- *
- *  \param[in] InDataStart  Pointer to the start of an ARP packet header
- */
-void DecodeARPHeader(void* InDataStart)
-{
-	#if !defined(NO_DECODE_ARP)
-	ARP_Header_t* ARPHeader = (ARP_Header_t*)InDataStart;
-
-	printf_P(PSTR("   \\\r\n    ARP\r\n"));
-
-	if (!(IP_COMPARE(&ARPHeader->TPA, &ServerIPAddress)) &&
-	    !(MAC_COMPARE(&ARPHeader->THA, &ServerMACAddress)))
-	{
-		printf_P(PSTR("    + NOT ADDRESSED TO DEVICE\r\n"));
-		return;
-	}
-
-	printf_P(PSTR("    + Protocol: %x\r\n"), SwapEndian_16(ARPHeader->ProtocolType));
-	printf_P(PSTR("    + Operation: %u\r\n"), SwapEndian_16(ARPHeader->Operation));
-
-	if (SwapEndian_16(ARPHeader->ProtocolType) == ETHERTYPE_IPV4)
-	{
-		printf_P(PSTR("    + SHA MAC: %02X:%02X:%02X:%02X:%02X:%02X\r\n"), ARPHeader->SHA.Octets[0],
-		                                                                   ARPHeader->SHA.Octets[1],
-		                                                                   ARPHeader->SHA.Octets[2],
-		                                                                   ARPHeader->SHA.Octets[3],
-		                                                                   ARPHeader->SHA.Octets[4],
-		                                                                   ARPHeader->SHA.Octets[5]);
-
-		printf_P(PSTR("    + SPA IP: %u.%u.%u.%u\r\n"), ARPHeader->SPA.Octets[0],
-		                                                ARPHeader->SPA.Octets[1],
-		                                                ARPHeader->SPA.Octets[2],
-		                                                ARPHeader->SPA.Octets[3]);
-
-		printf_P(PSTR("    + THA MAC: %02X:%02X:%02X:%02X:%02X:%02X\r\n"), ARPHeader->THA.Octets[0],
-		                                                                   ARPHeader->THA.Octets[1],
-		                                                                   ARPHeader->THA.Octets[2],
-		                                                                   ARPHeader->THA.Octets[3],
-		                                                                   ARPHeader->THA.Octets[4],
-		                                                                   ARPHeader->THA.Octets[5]);
-
-		printf_P(PSTR("    + TPA IP: %u.%u.%u.%u\r\n"), ARPHeader->TPA.Octets[0],
-		                                                ARPHeader->TPA.Octets[1],
-		                                                ARPHeader->TPA.Octets[2],
-		                                                ARPHeader->TPA.Octets[3]);
-	}
-	#endif
-}
-
-/** Decodes an IP header and prints its contents to through the USART in a human readable format.
- *
- *  \param[in] InDataStart  Pointer to the start of an IP packet header
- */
-void DecodeIPHeader(void* InDataStart)
-{
-	#if !defined(NO_DECODE_IP)
-	IP_Header_t* IPHeader  = (IP_Header_t*)InDataStart;
-
-	uint16_t HeaderLengthBytes = (IPHeader->HeaderLength * sizeof(uint32_t));
-
-	printf_P(PSTR("   \\\r\n    IP\r\n"));
-
-	if (!(IP_COMPARE(&IPHeader->DestinationAddress, &ServerIPAddress)))
-	{
-		printf_P(PSTR("    + NOT ADDRESSED TO DEVICE\r\n"));
-		return;
-	}
-
-	printf_P(PSTR("    + Header Length: %u Bytes\r\n"), HeaderLengthBytes);
-	printf_P(PSTR("    + Packet Version: %u\r\n"), IPHeader->Version);
-	printf_P(PSTR("    + Total Length: %u\r\n"), SwapEndian_16(IPHeader->TotalLength));
-
-	printf_P(PSTR("    + Protocol: %u\r\n"), IPHeader->Protocol);
-	printf_P(PSTR("    + TTL: %u\r\n"), IPHeader->TTL);
-
-	printf_P(PSTR("    + IP Src: %u.%u.%u.%u\r\n"), IPHeader->SourceAddress.Octets[0],
-	                                                IPHeader->SourceAddress.Octets[1],
-	                                                IPHeader->SourceAddress.Octets[2],
-	                                                IPHeader->SourceAddress.Octets[3]);
-
-	printf_P(PSTR("    + IP Dst: %u.%u.%u.%u\r\n"), IPHeader->DestinationAddress.Octets[0],
-	                                                IPHeader->DestinationAddress.Octets[1],
-	                                                IPHeader->DestinationAddress.Octets[2],
-	                                                IPHeader->DestinationAddress.Octets[3]);
-	#endif
-}
-
-/** Decodes an ICMP header and prints its contents to through the USART in a human readable format.
- *
- *  \param[in] InDataStart  Pointer to the start of an ICMP packet header
- */
-void DecodeICMPHeader(void* InDataStart)
-{
-	#if !defined(NO_DECODE_ICMP)
-	ICMP_Header_t* ICMPHeader  = (ICMP_Header_t*)InDataStart;
-
-	printf_P(PSTR("    \\\r\n     ICMP\r\n"));
-
-	printf_P(PSTR("     + Type: %u\r\n"), ICMPHeader->Type);
-	printf_P(PSTR("     + Code: %u\r\n"), ICMPHeader->Code);
-	#endif
-}
-
-/** Decodes a TCP header and prints its contents to through the USART in a human readable format.
- *
- *  \param[in] InDataStart  Pointer to the start of a TCP packet header
- */
-void DecodeTCPHeader(void* InDataStart)
-{
-	#if !defined(NO_DECODE_TCP)
-	TCP_Header_t* TCPHeader  = (TCP_Header_t*)InDataStart;
-
-	uint16_t               HeaderLengthBytes = (TCPHeader->DataOffset * sizeof(uint32_t));
-
-	printf_P(PSTR("    \\\r\n     TCP\r\n"));
-
-	printf_P(PSTR("     + Header Length: %u Bytes\r\n"), HeaderLengthBytes);
-
-	printf_P(PSTR("     + Source Port: %u\r\n"), SwapEndian_16(TCPHeader->SourcePort));
-	printf_P(PSTR("     + Destination Port: %u\r\n"), SwapEndian_16(TCPHeader->DestinationPort));
-
-	printf_P(PSTR("     + Sequence Number: %lu\r\n"), SwapEndian_32(TCPHeader->SequenceNumber));
-	printf_P(PSTR("     + Acknowledgment Number: %lu\r\n"), SwapEndian_32(TCPHeader->AcknowledgmentNumber));
-
-	printf_P(PSTR("     + Flags: 0x%02X\r\n"), TCPHeader->Flags);
-
-	if (TCP_GetPortState(TCPHeader->DestinationPort) == TCP_Port_Closed)
-	  printf_P(PSTR("     + NOT LISTENING ON DESTINATION PORT\r\n"));
-	#endif
-}
-
-/** Decodes an UDP header and prints its contents to through the USART in a human readable format.
- *
- *  \param[in] InDataStart  Pointer to the start of a UDP packet header
- */
-void DecodeUDPHeader(void* InDataStart)
-{
-	#if !defined(NO_DECODE_UDP)
-	UDP_Header_t* UDPHeader = (UDP_Header_t*)InDataStart;
-
-	printf_P(PSTR("    \\\r\n     UDP\r\n"));
-
-	printf_P(PSTR("     + Source Port: %u\r\n"), SwapEndian_16(UDPHeader->SourcePort));
-	printf_P(PSTR("     + Destination Port: %u\r\n"), SwapEndian_16(UDPHeader->DestinationPort));
-
-	printf_P(PSTR("     + Data Length: %d\r\n"), SwapEndian_16(UDPHeader->Length));
-	#endif
-}
-
-/** Decodes an DHCP header and prints its contents to through the USART in a human readable format.
- *
- *  \param[in] InDataStart  Pointer to the start of a DHCP packet header
- */
-void DecodeDHCPHeader(void* InDataStart)
-{
-	#if !defined(NO_DECODE_DHCP)
-	uint8_t* DHCPOptions = (InDataStart + sizeof(DHCP_Header_t));
-
-	printf_P(PSTR("     \\\r\n      DHCP\r\n"));
-
-	while (DHCPOptions[0] != DHCP_OPTION_END)
-	{
-		if (DHCPOptions[0] == DHCP_OPTION_MESSAGETYPE)
-		{
-			switch (DHCPOptions[2])
-			{
-				case DHCP_MESSAGETYPE_DISCOVER:
-					printf_P(PSTR("      + DISCOVER\r\n"));
-					break;
-				case DHCP_MESSAGETYPE_REQUEST:
-					printf_P(PSTR("      + REQUEST\r\n"));
-					break;
-				case DHCP_MESSAGETYPE_RELEASE:
-					printf_P(PSTR("      + RELEASE\r\n"));
-					break;
-				case DHCP_MESSAGETYPE_DECLINE:
-					printf_P(PSTR("      + DECLINE\r\n"));
-					break;
-			}
-		}
-
-		DHCPOptions += ((DHCPOptions[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptions[1] + 2));
-	}
-
-	#endif
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h
deleted file mode 100644
index 6a7d201953..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ProtocolDecoders.c.
- */
-
-#ifndef _PROTOCOL_DECODERS_H_
-#define _PROTOCOL_DECODERS_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/pgmspace.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-
-		#include "EthernetProtocols.h"
-		#include "Ethernet.h"
-		#include "Config/AppConfig.h"
-
-	/* Function Prototypes: */
-		void DecodeEthernetFrameHeader(void* InDataStart);
-		void DecodeARPHeader(void* InDataStart);
-		void DecodeIPHeader(void* InDataStart);
-		void DecodeICMPHeader(void* InDataStart);
-		void DecodeTCPHeader(void* InDataStart);
-		void DecodeUDPHeader(void* InDataStart);
-		void DecodeDHCPHeader(void* InDataStart);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c
deleted file mode 100644
index 892c5030bd..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c
+++ /dev/null
@@ -1,632 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Transmission Control Protocol (TCP) packet handling routines. This protocol handles the reliable in-order transmission
- *  and reception of packets to and from devices on a network, to "ports" on the device. It is used in situations where data
- *  delivery must be reliable and correct, e.g. HTTP, TELNET and most other non-streaming protocols.
- */
-
-#define  INCLUDE_FROM_TCP_C
-#include "TCP.h"
-
-/** Port state table array. This contains the current status of TCP ports in the device. To save on space, only open ports are
- *  stored - closed ports may be overwritten at any time, and the system will assume any ports not present in the array are closed. This
- *  allows for MAX_OPEN_TCP_PORTS to be less than the number of ports used by the application if desired.
- */
-TCP_PortState_t        PortStateTable[MAX_OPEN_TCP_PORTS];
-
-/** Connection state table array. This contains the current status of TCP connections in the device. To save on space, only active
- *  (non-closed) connections are stored - closed connections may be overwritten at any time, and the system will assume any connections
- *  not present in the array are closed.
- */
-TCP_ConnectionState_t  ConnectionStateTable[MAX_TCP_CONNECTIONS];
-
-
-/** Task to handle the calling of each registered application's callback function, to process and generate TCP packets at the application
- *  level. If an application produces a response, this task constructs the appropriate Ethernet frame and places it into the Ethernet OUT
- *  buffer for later transmission.
- */
-void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo,
-		         Ethernet_Frame_Info_t* const FrameOUT)
-{
-	/* Run each application in sequence, to process incoming and generate outgoing packets */
-	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
-	{
-		/* Find the corresponding port entry in the port table */
-		for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
-		{
-			/* Run the application handler for the port */
-			if ((PortStateTable[PTableEntry].Port  == ConnectionStateTable[CSTableEntry].Port) &&
-			    (PortStateTable[PTableEntry].State == TCP_Port_Open))
-			{
-				PortStateTable[PTableEntry].ApplicationHandler(&ConnectionStateTable[CSTableEntry],
-				                                               &ConnectionStateTable[CSTableEntry].Info.Buffer);
-			}
-		}
-	}
-
-	/* Bail out early if there is already a frame waiting to be sent in the Ethernet OUT buffer */
-	if (FrameOUT->FrameLength)
-	  return;
-
-	/* Send response packets from each application as the TCP packet buffers are filled by the applications */
-	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
-	{
-		/* For each completely received packet, pass it along to the listening application */
-		if ((ConnectionStateTable[CSTableEntry].Info.Buffer.Direction == TCP_PACKETDIR_OUT) &&
-		    (ConnectionStateTable[CSTableEntry].Info.Buffer.Ready))
-		{
-			Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT->FrameData;
-			IP_Header_t*             IPHeaderOUT    = (IP_Header_t*)&FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t)];
-			TCP_Header_t*            TCPHeaderOUT   = (TCP_Header_t*)&FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t) +
-			                                                                              sizeof(IP_Header_t)];
-			void*                    TCPDataOUT     = &FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t) +
-			                                                               sizeof(IP_Header_t) +
-			                                                               sizeof(TCP_Header_t)];
-
-			uint16_t PacketSize = ConnectionStateTable[CSTableEntry].Info.Buffer.Length;
-
-			/* Fill out the TCP data */
-			TCPHeaderOUT->SourcePort           = ConnectionStateTable[CSTableEntry].Port;
-			TCPHeaderOUT->DestinationPort      = ConnectionStateTable[CSTableEntry].RemotePort;
-			TCPHeaderOUT->SequenceNumber       = SwapEndian_32(ConnectionStateTable[CSTableEntry].Info.SequenceNumberOut);
-			TCPHeaderOUT->AcknowledgmentNumber = SwapEndian_32(ConnectionStateTable[CSTableEntry].Info.SequenceNumberIn);
-			TCPHeaderOUT->DataOffset           = (sizeof(TCP_Header_t) / sizeof(uint32_t));
-			TCPHeaderOUT->WindowSize           = SwapEndian_16(TCP_WINDOW_SIZE);
-
-			TCPHeaderOUT->Flags                = TCP_FLAG_ACK;
-			TCPHeaderOUT->UrgentPointer        = 0;
-			TCPHeaderOUT->Checksum             = 0;
-			TCPHeaderOUT->Reserved             = 0;
-
-			memcpy(TCPDataOUT, ConnectionStateTable[CSTableEntry].Info.Buffer.Data, PacketSize);
-
-			ConnectionStateTable[CSTableEntry].Info.SequenceNumberOut += PacketSize;
-
-			TCPHeaderOUT->Checksum             = TCP_Checksum16(TCPHeaderOUT, &ServerIPAddress,
-			                                                    &ConnectionStateTable[CSTableEntry].RemoteAddress,
-			                                                    (sizeof(TCP_Header_t) + PacketSize));
-
-			PacketSize += sizeof(TCP_Header_t);
-
-			/* Fill out the response IP header */
-			IPHeaderOUT->TotalLength        = SwapEndian_16(sizeof(IP_Header_t) + PacketSize);
-			IPHeaderOUT->TypeOfService      = 0;
-			IPHeaderOUT->HeaderLength       = (sizeof(IP_Header_t) / sizeof(uint32_t));
-			IPHeaderOUT->Version            = 4;
-			IPHeaderOUT->Flags              = 0;
-			IPHeaderOUT->FragmentOffset     = 0;
-			IPHeaderOUT->Identification     = 0;
-			IPHeaderOUT->HeaderChecksum     = 0;
-			IPHeaderOUT->Protocol           = PROTOCOL_TCP;
-			IPHeaderOUT->TTL                = DEFAULT_TTL;
-			IPHeaderOUT->SourceAddress      = ServerIPAddress;
-			IPHeaderOUT->DestinationAddress = ConnectionStateTable[CSTableEntry].RemoteAddress;
-
-			IPHeaderOUT->HeaderChecksum     = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t));
-
-			PacketSize += sizeof(IP_Header_t);
-
-			/* Fill out the response Ethernet frame header */
-			FrameOUTHeader->Source          = ServerMACAddress;
-			FrameOUTHeader->Destination     = (MAC_Address_t){{0x02, 0x00, 0x02, 0x00, 0x02, 0x00}};
-			FrameOUTHeader->EtherType       = SwapEndian_16(ETHERTYPE_IPV4);
-
-			PacketSize += sizeof(Ethernet_Frame_Header_t);
-
-			/* Set the response length in the buffer and indicate that a response is ready to be sent */
-			FrameOUT->FrameLength           = PacketSize;
-
-			ConnectionStateTable[CSTableEntry].Info.Buffer.Ready = false;
-
-			break;
-		}
-	}
-}
-
-/** Initializes the TCP protocol handler, clearing the port and connection state tables. This must be called before TCP packets are
- *  processed.
- */
-void TCP_Init(void)
-{
-	/* Initialize the port state table with all CLOSED entries */
-	for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
-	  PortStateTable[PTableEntry].State = TCP_Port_Closed;
-
-	/* Initialize the connection table with all CLOSED entries */
-	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
-	  ConnectionStateTable[CSTableEntry].State = TCP_Connection_Closed;
-}
-
-/** Sets the state and callback handler of the given port, specified in big endian to the given state.
- *
- *  \param[in] Port     Port whose state and callback function to set, specified in big endian
- *  \param[in] State    New state of the port, a value from the \ref TCP_PortStates_t enum
- *  \param[in] Handler  Application callback handler for the port
- *
- *  \return Boolean \c true if the port state was set, \c false otherwise (no more space in the port state table)
- */
-bool TCP_SetPortState(const uint16_t Port,
-                      const uint8_t State,
-                      void (*Handler)(TCP_ConnectionState_t*, TCP_ConnectionBuffer_t*))
-{
-	/* Note, Port number should be specified in BIG endian to simplify network code */
-
-	/* Check to see if the port entry is already in the port state table */
-	for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
-	{
-		/* Find existing entry for the port in the table, update it if found */
-		if (PortStateTable[PTableEntry].Port == Port)
-		{
-			PortStateTable[PTableEntry].State = State;
-			PortStateTable[PTableEntry].ApplicationHandler = Handler;
-			return true;
-		}
-	}
-
-	/* Check if trying to open the port -- if so we need to find an unused (closed) entry and replace it */
-	if (State == TCP_Port_Open)
-	{
-		for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
-		{
-			/* Find a closed port entry in the table, change it to the given port and state */
-			if (PortStateTable[PTableEntry].State == TCP_Port_Closed)
-			{
-				PortStateTable[PTableEntry].Port  = Port;
-				PortStateTable[PTableEntry].State = State;
-				PortStateTable[PTableEntry].ApplicationHandler = Handler;
-				return true;
-			}
-		}
-
-		/* Port not in table and no room to add it, return failure */
-		return false;
-	}
-	else
-	{
-		/* Port not in table but trying to close it, so operation successful */
-		return true;
-	}
-}
-
-/** Retrieves the current state of a given TCP port, specified in big endian.
- *
- *  \param[in] Port  TCP port whose state is to be retrieved, given in big-endian
- *
- *  \return A value from the \ref TCP_PortStates_t enum
- */
-uint8_t TCP_GetPortState(const uint16_t Port)
-{
-	/* Note, Port number should be specified in BIG endian to simplify network code */
-
-	for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
-	{
-		/* Find existing entry for the port in the table, return the port status if found */
-		if (PortStateTable[PTableEntry].Port == Port)
-		  return PortStateTable[PTableEntry].State;
-	}
-
-	/* Port not in table, assume closed */
-	return TCP_Port_Closed;
-}
-
-/** Sets the connection state of the given port, remote address and remote port to the given TCP connection state. If the
- *  connection exists in the connection state table it is updated, otherwise it is created if possible.
- *
- *  \param[in] Port           TCP port of the connection on the device, specified in big endian
- *  \param[in] RemoteAddress  Remote protocol IP address of the connected device
- *  \param[in] RemotePort     TCP port of the remote device in the connection, specified in big endian
- *  \param[in] State          TCP connection state, a value from the \ref TCP_ConnectionStates_t enum
- *
- *  \return Boolean \c true if the connection was updated or created, \c false otherwise (no more space in the connection state table)
- */
-bool TCP_SetConnectionState(const uint16_t Port,
-                            const IP_Address_t* RemoteAddress,
-                            const uint16_t RemotePort,
-                            const uint8_t State)
-{
-	/* Note, Port number should be specified in BIG endian to simplify network code */
-
-	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
-	{
-		/* Find port entry in the table */
-		if ((ConnectionStateTable[CSTableEntry].Port == Port) &&
-		     IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) &&
-			 ConnectionStateTable[CSTableEntry].RemotePort == RemotePort)
-		{
-			ConnectionStateTable[CSTableEntry].State = State;
-			return true;
-		}
-	}
-
-	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
-	{
-		/* Find empty entry in the table */
-		if (ConnectionStateTable[CSTableEntry].State == TCP_Connection_Closed)
-		{
-			ConnectionStateTable[CSTableEntry].Port          = Port;
-			ConnectionStateTable[CSTableEntry].RemoteAddress = *RemoteAddress;
-			ConnectionStateTable[CSTableEntry].RemotePort    = RemotePort;
-			ConnectionStateTable[CSTableEntry].State         = State;
-			return true;
-		}
-	}
-
-	return false;
-}
-
-/** Retrieves the current state of a given TCP connection to a host.
- *
- *  \param[in] Port           TCP port on the device in the connection, specified in big endian
- *  \param[in] RemoteAddress  Remote protocol IP address of the connected host
- *  \param[in] RemotePort     Remote TCP port of the connected host, specified in big endian
- *
- *  \return A value from the \ref TCP_ConnectionStates_t enum
- */
-uint8_t TCP_GetConnectionState(const uint16_t Port,
-                               const IP_Address_t* RemoteAddress,
-                               const uint16_t RemotePort)
-{
-	/* Note, Port number should be specified in BIG endian to simplify network code */
-
-	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
-	{
-		/* Find port entry in the table */
-		if ((ConnectionStateTable[CSTableEntry].Port == Port) &&
-		     IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) &&
-			 ConnectionStateTable[CSTableEntry].RemotePort == RemotePort)
-
-		{
-			return ConnectionStateTable[CSTableEntry].State;
-		}
-	}
-
-	return TCP_Connection_Closed;
-}
-
-/** Retrieves the connection info structure of a given connection to a host.
- *
- *  \param[in] Port           TCP port on the device in the connection, specified in big endian
- *  \param[in] RemoteAddress  Remote protocol IP address of the connected host
- *  \param[in] RemotePort     Remote TCP port of the connected host, specified in big endian
- *
- *  \return ConnectionInfo structure of the connection if found, NULL otherwise
- */
-TCP_ConnectionInfo_t* TCP_GetConnectionInfo(const uint16_t Port,
-                                            const IP_Address_t* RemoteAddress,
-                                            const uint16_t RemotePort)
-{
-	/* Note, Port number should be specified in BIG endian to simplify network code */
-
-	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
-	{
-		/* Find port entry in the table */
-		if ((ConnectionStateTable[CSTableEntry].Port == Port) &&
-		     IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) &&
-			 ConnectionStateTable[CSTableEntry].RemotePort == RemotePort)
-		{
-			return &ConnectionStateTable[CSTableEntry].Info;
-		}
-	}
-
-	return NULL;
-}
-
-/** Processes a TCP packet inside an Ethernet frame, and writes the appropriate response
- *  to the output Ethernet frame if one is created by a application handler.
- *
- *  \param[in] IPHeaderInStart     Pointer to the start of the incoming packet's IP header
- *  \param[in] TCPHeaderInStart    Pointer to the start of the incoming packet's TCP header
- *  \param[out] TCPHeaderOutStart  Pointer to the start of the outgoing packet's TCP header
- *
- *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE if no
- *           response was generated, NO_PROCESS if the packet processing was deferred until the
- *           next Ethernet packet handler iteration
- */
-int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart,
-                             void* TCPHeaderInStart,
-                             void* TCPHeaderOutStart)
-{
-	IP_Header_t*  IPHeaderIN   = (IP_Header_t*)IPHeaderInStart;
-	TCP_Header_t* TCPHeaderIN  = (TCP_Header_t*)TCPHeaderInStart;
-	TCP_Header_t* TCPHeaderOUT = (TCP_Header_t*)TCPHeaderOutStart;
-
-	TCP_ConnectionInfo_t* ConnectionInfo;
-
-	DecodeTCPHeader(TCPHeaderInStart);
-
-	bool PacketResponse = false;
-
-	/* Check if the destination port is open and allows incoming connections */
-	if (TCP_GetPortState(TCPHeaderIN->DestinationPort) == TCP_Port_Open)
-	{
-		/* Detect SYN from host to start a connection */
-		if (TCPHeaderIN->Flags & TCP_FLAG_SYN)
-		  TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Listen);
-
-		/* Detect RST from host to abort existing connection */
-		if (TCPHeaderIN->Flags & TCP_FLAG_RST)
-		{
-			if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-			                           TCPHeaderIN->SourcePort, TCP_Connection_Closed))
-			{
-				TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK);
-				PacketResponse = true;
-			}
-		}
-		else
-		{
-			/* Process the incoming TCP packet based on the current connection state for the sender and port */
-			switch (TCP_GetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort))
-			{
-				case TCP_Connection_Listen:
-					if (TCPHeaderIN->Flags == TCP_FLAG_SYN)
-					{
-						/* SYN connection starts a connection with a peer */
-						if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-						                           TCPHeaderIN->SourcePort, TCP_Connection_SYNReceived))
-						{
-							TCPHeaderOUT->Flags = (TCP_FLAG_SYN | TCP_FLAG_ACK);
-
-							ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort);
-
-							ConnectionInfo->SequenceNumberIn  = (SwapEndian_32(TCPHeaderIN->SequenceNumber) + 1);
-							ConnectionInfo->SequenceNumberOut = 0;
-							ConnectionInfo->Buffer.InUse      = false;
-						}
-						else
-						{
-							TCPHeaderOUT->Flags = TCP_FLAG_RST;
-						}
-
-						PacketResponse      = true;
-					}
-
-					break;
-				case TCP_Connection_SYNReceived:
-					if (TCPHeaderIN->Flags == TCP_FLAG_ACK)
-					{
-						/* ACK during the connection process completes the connection to a peer */
-
-						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-											   TCPHeaderIN->SourcePort, TCP_Connection_Established);
-
-						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-															   TCPHeaderIN->SourcePort);
-
-						ConnectionInfo->SequenceNumberOut++;
-					}
-
-					break;
-				case TCP_Connection_Established:
-					if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK))
-					{
-						/* FIN ACK when connected to a peer starts the finalization process */
-
-						TCPHeaderOUT->Flags = (TCP_FLAG_FIN | TCP_FLAG_ACK);
-						PacketResponse      = true;
-
-						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-											   TCPHeaderIN->SourcePort, TCP_Connection_CloseWait);
-
-						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-															   TCPHeaderIN->SourcePort);
-
-						ConnectionInfo->SequenceNumberIn++;
-						ConnectionInfo->SequenceNumberOut++;
-					}
-					else if ((TCPHeaderIN->Flags == TCP_FLAG_ACK) || (TCPHeaderIN->Flags == (TCP_FLAG_ACK | TCP_FLAG_PSH)))
-					{
-						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-															   TCPHeaderIN->SourcePort);
-
-						/* Check if the buffer is currently in use either by a buffered data to send, or receive */
-						if ((ConnectionInfo->Buffer.InUse == false) && (ConnectionInfo->Buffer.Ready == false))
-						{
-							ConnectionInfo->Buffer.Direction = TCP_PACKETDIR_IN;
-							ConnectionInfo->Buffer.InUse     = true;
-							ConnectionInfo->Buffer.Length    = 0;
-						}
-
-						/* Check if the buffer has been claimed by us to read in data from the peer */
-						if ((ConnectionInfo->Buffer.Direction == TCP_PACKETDIR_IN) &&
-							(ConnectionInfo->Buffer.Length != TCP_WINDOW_SIZE))
-						{
-							uint16_t IPOffset   = (IPHeaderIN->HeaderLength * sizeof(uint32_t));
-							uint16_t TCPOffset  = (TCPHeaderIN->DataOffset * sizeof(uint32_t));
-							uint16_t DataLength = (SwapEndian_16(IPHeaderIN->TotalLength) - IPOffset - TCPOffset);
-
-							/* Copy the packet data into the buffer */
-							memcpy(&ConnectionInfo->Buffer.Data[ConnectionInfo->Buffer.Length],
-								   &((uint8_t*)TCPHeaderInStart)[TCPOffset],
-								   DataLength);
-
-							ConnectionInfo->SequenceNumberIn += DataLength;
-							ConnectionInfo->Buffer.Length    += DataLength;
-
-							/* Check if the buffer is full or if the PSH flag is set, if so indicate buffer ready */
-							if ((!(TCP_WINDOW_SIZE - ConnectionInfo->Buffer.Length)) || (TCPHeaderIN->Flags & TCP_FLAG_PSH))
-							{
-								ConnectionInfo->Buffer.InUse = false;
-								ConnectionInfo->Buffer.Ready = true;
-
-								TCPHeaderOUT->Flags = TCP_FLAG_ACK;
-								PacketResponse      = true;
-							}
-						}
-						else
-						{
-							/* Buffer is currently in use by the application, defer processing of the incoming packet */
-							return NO_PROCESS;
-						}
-					}
-
-					break;
-				case TCP_Connection_Closing:
-						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-															   TCPHeaderIN->SourcePort);
-
-						TCPHeaderOUT->Flags = (TCP_FLAG_ACK | TCP_FLAG_FIN);
-						PacketResponse      = true;
-
-						ConnectionInfo->Buffer.InUse = false;
-
-						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-											   TCPHeaderIN->SourcePort, TCP_Connection_FINWait1);
-
-					break;
-				case TCP_Connection_FINWait1:
-					if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK))
-					{
-						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-															   TCPHeaderIN->SourcePort);
-
-						TCPHeaderOUT->Flags = TCP_FLAG_ACK;
-						PacketResponse      = true;
-
-						ConnectionInfo->SequenceNumberIn++;
-						ConnectionInfo->SequenceNumberOut++;
-
-						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-											   TCPHeaderIN->SourcePort, TCP_Connection_Closed);
-					}
-					else if (TCPHeaderIN->Flags == TCP_FLAG_ACK)
-					{
-						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-											   TCPHeaderIN->SourcePort, TCP_Connection_FINWait2);
-					}
-
-					break;
-				case TCP_Connection_FINWait2:
-					if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK))
-					{
-						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-															   TCPHeaderIN->SourcePort);
-
-						TCPHeaderOUT->Flags = TCP_FLAG_ACK;
-						PacketResponse      = true;
-
-						ConnectionInfo->SequenceNumberIn++;
-						ConnectionInfo->SequenceNumberOut++;
-
-						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-											   TCPHeaderIN->SourcePort, TCP_Connection_Closed);
-					}
-
-					break;
-				case TCP_Connection_CloseWait:
-					if (TCPHeaderIN->Flags == TCP_FLAG_ACK)
-					{
-						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-											   TCPHeaderIN->SourcePort, TCP_Connection_Closed);
-					}
-
-					break;
-			}
-		}
-	}
-	else
-	{
-		/* Port is not open, indicate via a RST/ACK response to the sender */
-		TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK);
-		PacketResponse      = true;
-	}
-
-	/* Check if we need to respond to the sent packet */
-	if (PacketResponse)
-	{
-		ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-		                                       TCPHeaderIN->SourcePort);
-
-		TCPHeaderOUT->SourcePort           = TCPHeaderIN->DestinationPort;
-		TCPHeaderOUT->DestinationPort      = TCPHeaderIN->SourcePort;
-		TCPHeaderOUT->SequenceNumber       = SwapEndian_32(ConnectionInfo->SequenceNumberOut);
-		TCPHeaderOUT->AcknowledgmentNumber = SwapEndian_32(ConnectionInfo->SequenceNumberIn);
-		TCPHeaderOUT->DataOffset           = (sizeof(TCP_Header_t) / sizeof(uint32_t));
-
-		if (!(ConnectionInfo->Buffer.InUse))
-		  TCPHeaderOUT->WindowSize         = SwapEndian_16(TCP_WINDOW_SIZE);
-		else
-		  TCPHeaderOUT->WindowSize         = SwapEndian_16(TCP_WINDOW_SIZE - ConnectionInfo->Buffer.Length);
-
-		TCPHeaderOUT->UrgentPointer        = 0;
-		TCPHeaderOUT->Checksum             = 0;
-		TCPHeaderOUT->Reserved             = 0;
-
-		TCPHeaderOUT->Checksum             = TCP_Checksum16(TCPHeaderOUT, &IPHeaderIN->DestinationAddress,
-		                                                    &IPHeaderIN->SourceAddress, sizeof(TCP_Header_t));
-
-		return sizeof(TCP_Header_t);
-	}
-
-	return NO_RESPONSE;
-}
-
-/** Calculates the appropriate TCP checksum, consisting of the addition of the one's compliment of each word,
- *  complimented.
- *
- *  \param[in] TCPHeaderOutStart   Pointer to the start of the packet's outgoing TCP header
- *  \param[in] SourceAddress       Source protocol IP address of the outgoing IP header
- *  \param[in] DestinationAddress  Destination protocol IP address of the outgoing IP header
- *  \param[in] TCPOutSize          Size in bytes of the TCP data header and payload
- *
- *  \return A 16-bit TCP checksum value
- */
-static uint16_t TCP_Checksum16(void* TCPHeaderOutStart,
-                               const IP_Address_t* SourceAddress,
-                               const IP_Address_t* DestinationAddress,
-                               uint16_t TCPOutSize)
-{
-	uint32_t Checksum = 0;
-
-	/* TCP/IP checksums are the addition of the one's compliment of each word including the IP pseudo-header,
-	   complimented */
-
-	Checksum += ((uint16_t*)SourceAddress)[0];
-	Checksum += ((uint16_t*)SourceAddress)[1];
-	Checksum += ((uint16_t*)DestinationAddress)[0];
-	Checksum += ((uint16_t*)DestinationAddress)[1];
-	Checksum += SwapEndian_16(PROTOCOL_TCP);
-	Checksum += SwapEndian_16(TCPOutSize);
-
-	for (uint16_t CurrWord = 0; CurrWord < (TCPOutSize >> 1); CurrWord++)
-	  Checksum += ((uint16_t*)TCPHeaderOutStart)[CurrWord];
-
-	if (TCPOutSize & 0x01)
-	  Checksum += (((uint16_t*)TCPHeaderOutStart)[TCPOutSize >> 1] & 0x00FF);
-
-	while (Checksum & 0xFFFF0000)
-	  Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16));
-
-	return ~Checksum;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h
deleted file mode 100644
index 92fbdf3620..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for TCP.c.
- */
-
-#ifndef _TCP_H_
-#define _TCP_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <stdbool.h>
-
-		#include "EthernetProtocols.h"
-		#include "Ethernet.h"
-		#include "ProtocolDecoders.h"
-
-	/* Macros: */
-		/** Maximum number of TCP ports which can be open at the one time. */
-		#define MAX_OPEN_TCP_PORTS              1
-
-		/** Maximum number of TCP connections which can be sustained at the one time. */
-		#define MAX_TCP_CONNECTIONS             3
-
-		/** TCP window size, giving the maximum number of bytes which can be buffered at the one time. */
-		#define TCP_WINDOW_SIZE                 512
-
-		/** Port number for HTTP transmissions. */
-		#define TCP_PORT_HTTP                   SwapEndian_16(80)
-
-		/** Data direction indicator for a TCP application buffer, indicating data from host-to-device. */
-		#define TCP_PACKETDIR_IN                false
-
-		/** Data direction indicator for a TCP application buffer, indicating data from device-to-host. */
-		#define TCP_PACKETDIR_OUT               true
-
-		/** Congestion Window Reduced TCP flag mask. */
-		#define TCP_FLAG_CWR                    (1 << 7)
-
-		/** Explicit Congestion Notification TCP flag mask. */
-		#define TCP_FLAG_ECE                    (1 << 6)
-
-		/** Urgent TCP flag mask. */
-		#define TCP_FLAG_URG                    (1 << 5)
-
-		/** Data Acknowledge TCP flag mask. */
-		#define TCP_FLAG_ACK                    (1 << 4)
-
-		/** Data Push TCP flag mask. */
-		#define TCP_FLAG_PSH                    (1 << 3)
-
-		/** Reset TCP flag mask. */
-		#define TCP_FLAG_RST                    (1 << 2)
-
-		/** Synchronize TCP flag mask. */
-		#define TCP_FLAG_SYN                    (1 << 1)
-
-		/** Connection Finalize TCP flag mask. */
-		#define TCP_FLAG_FIN                    (1 << 0)
-
-		/** Application macro: Determines if the given application buffer contains a packet received from the host
-		 *
-		 *  \param[in] Buffer  Application buffer to check
-		 *
-		 *  \return Boolean \c true if the buffer contains a packet from the host, \c false otherwise
-		 */
-		#define TCP_APP_HAS_RECEIVED_PACKET(Buffer)  (Buffer->Ready && (Buffer->Direction == TCP_PACKETDIR_IN))
-
-		/** Application macro: Indicates if the application buffer is currently locked by the application for device-to-host transfers.
-		 *
-		 *  \param[in] Buffer  Application buffer to check
-		 *
-		 *  \return Boolean \c true if the buffer has been captured by the application for device-to-host transmissions, \c false otherwise
-		 */
-		#define TCP_APP_HAVE_CAPTURED_BUFFER(Buffer) (!(Buffer->Ready) && Buffer->InUse && (Buffer->Direction == TCP_PACKETDIR_OUT))
-
-		/** Application macro: Indicates if the application can lock the buffer for multiple continued device-to-host transmissions.
-		 *
-		 *  \param[in] Buffer  Application buffer to check
-		 *
-		 *  \return Boolean \c true if the buffer may be captured by the application for device-to-host transmissions, \c false otherwise
-		 */
-		#define TCP_APP_CAN_CAPTURE_BUFFER(Buffer)   Buffer->InUse
-
-		/** Application macro: Captures the application buffer, locking it for device-to-host transmissions only. This should be
-		 *  performed when the application needs to transmit several packets worth of data in succession with no interruptions from the host.
-		 *
-		 *  \pre The application must check that the buffer can be locked first using TCP_APP_CAN_CAPTURE_BUFFER().
-		 *
-		 *  \param[in] Buffer  Application buffer to lock
-		 */
-		#define TCP_APP_CAPTURE_BUFFER(Buffer)       do { Buffer->Direction = TCP_PACKETDIR_OUT; Buffer->InUse = true; } while (0)
-
-		/** Application macro: Releases a captured application buffer, allowing for host-to-device packets to be received.
-		 *
-		 *  \param[in] Buffer  Application buffer to release
-		 */
-		#define TCP_APP_RELEASE_BUFFER(Buffer)       do { Buffer->InUse = false; } while (0)
-
-		/** Application macro: Sends the contents of the given application buffer to the host.
-		 *
-		 *  \param[in] Buffer  Application buffer to send
-		 *  \param[in] Len     Length of data contained in the buffer
-		 */
-		#define TCP_APP_SEND_BUFFER(Buffer, Len)     do { Buffer->Direction = TCP_PACKETDIR_OUT; Buffer->Length = Len; Buffer->Ready = true; } while (0)
-
-		/** Application macro: Clears the application buffer, ready for a packet to be written to it.
-		 *
-		 *  \param[in] Buffer  Application buffer to clear
-		 */
-		#define TCP_APP_CLEAR_BUFFER(Buffer)         do { Buffer->Ready = false; Buffer->Length = 0; } while (0)
-
-		/** Application macro: Closes an open connection to a host.
-		 *
-		 *  \param[in] Connection  Open TCP connection to close
-		 */
-		#define TCP_APP_CLOSECONNECTION(Connection)  do { Connection->State = TCP_Connection_Closing;  } while (0)
-
-	/* Enums: */
-		/** Enum for possible TCP port states. */
-		enum TCP_PortStates_t
-		{
-			TCP_Port_Closed            = 0, /**< TCP port closed, no connections to a host may be made on this port. */
-			TCP_Port_Open              = 1, /**< TCP port open, connections to a host may be made on this port. */
-		};
-
-		/** Enum for possible TCP connection states. */
-		enum TCP_ConnectionStates_t
-		{
-			TCP_Connection_Listen      = 0, /**< Listening for a connection from a host */
-			TCP_Connection_SYNSent     = 1, /**< Unused */
-			TCP_Connection_SYNReceived = 2, /**< SYN received, waiting for ACK */
-			TCP_Connection_Established = 3, /**< Connection established in both directions */
-			TCP_Connection_FINWait1    = 4, /**< Closing, waiting for ACK */
-			TCP_Connection_FINWait2    = 5, /**< Closing, waiting for FIN ACK */
-			TCP_Connection_CloseWait   = 6, /**< Closing, waiting for ACK */
-			TCP_Connection_Closing     = 7, /**< Unused */
-			TCP_Connection_LastACK     = 8, /**< Unused */
-			TCP_Connection_TimeWait    = 9, /**< Unused */
-			TCP_Connection_Closed      = 10, /**< Connection closed in both directions */
-		};
-
-	/* Type Defines: */
-		/** Type define for a TCP connection buffer structure, including size, data and direction. */
-		typedef struct
-		{
-			uint16_t               Length; /**< Length of data in the TCP application buffer */
-			uint8_t                Data[TCP_WINDOW_SIZE]; /**< TCP application data buffer */
-			bool                   Direction; /**< Buffer transmission direction, either TCP_PACKETDIR_IN  or TCP_PACKETDIR_OUT */
-			bool                   Ready; /**< If data from host, indicates buffer ready to be read, otherwise indicates
-			                               *   buffer ready to be sent to the host
-			                               */
-			bool                   InUse; /**< Indicates if the buffer is locked to to the current direction, and cannot be changed */
-		} TCP_ConnectionBuffer_t;
-
-		/** Type define for a TCP connection information structure. */
-		typedef struct
-		{
-			uint32_t               SequenceNumberIn; /**< Current TCP sequence number for host-to-device */
-			uint32_t               SequenceNumberOut; /**< Current TCP sequence number for device-to-host */
-			TCP_ConnectionBuffer_t Buffer; /**< Connection application data buffer */
-		} TCP_ConnectionInfo_t;
-
-		/** Type define for a complete TCP connection state. */
-		typedef struct
-		{
-			uint16_t               Port; /**< Connection port number on the device */
-			uint16_t               RemotePort; /**< Connection port number on the host */
-			IP_Address_t           RemoteAddress; /**< Connection protocol IP address of the host */
-			TCP_ConnectionInfo_t   Info; /**< Connection information, including application buffer */
-			uint8_t                State; /**< Current connection state, a value from the \ref TCP_ConnectionStates_t enum */
-		} TCP_ConnectionState_t;
-
-		/** Type define for a TCP port state. */
-		typedef struct
-		{
-			uint16_t               Port; /**< TCP port number on the device */
-			uint8_t                State; /**< Current port state, a value from the \ref TCP_PortStates_t enum */
-			void                   (*ApplicationHandler) (TCP_ConnectionState_t* ConnectionState,
-			                                              TCP_ConnectionBuffer_t* Buffer); /**< Port application handler */
-		} TCP_PortState_t;
-
-		/** Type define for a TCP packet header. */
-		typedef struct
-		{
-			uint16_t               SourcePort; /**< Source port of the TCP packet */
-			uint16_t               DestinationPort; /**< Destination port of the TCP packet */
-
-			uint32_t               SequenceNumber; /**< Data sequence number of the packet */
-			uint32_t               AcknowledgmentNumber; /**< Data acknowledgment number of the packet */
-
-			unsigned               Reserved : 4; /**< Reserved, must be all 0 */
-			unsigned               DataOffset : 4; /**< Offset of the data from the start of the header, in 4 byte chunks */
-			uint8_t                Flags; /**< TCP packet flags */
-			uint16_t               WindowSize; /**< Current data window size (bytes remaining in reception buffer) */
-
-			uint16_t               Checksum; /**< TCP checksum */
-			uint16_t               UrgentPointer; /**< Urgent data pointer */
-		} TCP_Header_t;
-
-	/* Function Prototypes: */
-		void                  TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo,
-		                                  Ethernet_Frame_Info_t* const FrameOUT);
-		void                  TCP_Init(void);
-		bool                  TCP_SetPortState(const uint16_t Port,
-		                                       const uint8_t State,
-		                                       void (*Handler)(TCP_ConnectionState_t*, TCP_ConnectionBuffer_t*));
-		uint8_t               TCP_GetPortState(const uint16_t Port);
-		bool                  TCP_SetConnectionState(const uint16_t Port,
-		                                             const IP_Address_t* RemoteAddress,
-		                                             const uint16_t RemotePort,
-		                                             const uint8_t State);
-		uint8_t               TCP_GetConnectionState(const uint16_t Port,
-		                                             const IP_Address_t* RemoteAddress,
-		                                             const uint16_t RemotePort);
-		TCP_ConnectionInfo_t* TCP_GetConnectionInfo(const uint16_t Port,
-		                                            const IP_Address_t* RemoteAddress,
-		                                            const uint16_t RemotePort);
-		int16_t               TCP_ProcessTCPPacket(void* IPHeaderInStart,
-		                                           void* TCPHeaderInStart,
-		                                           void* TCPHeaderOutStart);
-
-		#if defined(INCLUDE_FROM_TCP_C)
-			static uint16_t TCP_Checksum16(void* TCPHeaderOutStart,
-			                               const IP_Address_t* SourceAddress,
-			                               const IP_Address_t* DestinationAddress,
-			                               uint16_t TCPOutSize);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c
deleted file mode 100644
index 95911fc5d3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  User Datagram Protocol (UDP) packet handling routines. This protocol handles high throughput, low
- *  reliability packets which are typically used to encapsulate streaming data.
- */
-
-#define  INCLUDE_FROM_UDP_C
-#include "UDP.h"
-
-/** Processes a UDP packet inside an Ethernet frame, and writes the appropriate response
- *  to the output Ethernet frame if a sub-protocol handler has created a response packet.
- *
- *  \param[in] IPHeaderInStart     Pointer to the start of the incoming packet's IP header
- *  \param[in] UDPHeaderInStart    Pointer to the start of the incoming packet's UDP header
- *  \param[out] UDPHeaderOutStart  Pointer to the start of the outgoing packet's UDP header
- *
- *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
- */
-int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart,
-                             void* UDPHeaderInStart,
-                             void* UDPHeaderOutStart)
-{
-	UDP_Header_t* UDPHeaderIN  = (UDP_Header_t*)UDPHeaderInStart;
-	UDP_Header_t* UDPHeaderOUT = (UDP_Header_t*)UDPHeaderOutStart;
-
-	int16_t RetSize = NO_RESPONSE;
-
-	DecodeUDPHeader(UDPHeaderInStart);
-
-	switch (SwapEndian_16(UDPHeaderIN->DestinationPort))
-	{
-		case UDP_PORT_DHCP_REQUEST:
-			RetSize = DHCP_ProcessDHCPPacket(IPHeaderInStart,
-			                                 &((uint8_t*)UDPHeaderInStart)[sizeof(UDP_Header_t)],
-		                                     &((uint8_t*)UDPHeaderOutStart)[sizeof(UDP_Header_t)]);
-			break;
-	}
-
-	/* Check to see if the protocol processing routine has filled out a response */
-	if (RetSize > 0)
-	{
-		/* Fill out the response UDP packet header */
-		UDPHeaderOUT->SourcePort      = UDPHeaderIN->DestinationPort;
-		UDPHeaderOUT->DestinationPort = UDPHeaderIN->SourcePort;
-		UDPHeaderOUT->Checksum        = 0;
-		UDPHeaderOUT->Length          = SwapEndian_16(sizeof(UDP_Header_t) + RetSize);
-
-		/* Return the size of the response so far */
-		return (sizeof(UDP_Header_t) + RetSize);
-	}
-
-	return NO_RESPONSE;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h
deleted file mode 100644
index 2a66977804..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for UDP.c.
- */
-
-#ifndef _UDP_H_
-#define _UDP_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-
-		#include "EthernetProtocols.h"
-		#include "Ethernet.h"
-		#include "ProtocolDecoders.h"
-		#include "DHCP.h"
-
-	/* Macros: */
-		/** Source UDP port for a DHCP request. */
-		#define UDP_PORT_DHCP_REQUEST 67
-
-		/** Destination UDP port for a DHCP reply. */
-		#define UDP_PORT_DHCP_REPLY   68
-
-	/* Type Defines: */
-		/** Type define for a UDP packet header. */
-		typedef struct
-		{
-			uint16_t SourcePort; /**< Packet source port */
-			uint16_t DestinationPort; /**< Packet destination port */
-			uint16_t Length; /**< Total packet length, in bytes */
-			uint16_t Checksum; /**< Optional UDP packet checksum */
-		} UDP_Header_t;
-
-	/* Function Prototypes: */
-		int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart,
-		                             void* UDPHeaderInStart,
-		                             void* UDPHeaderOutStart);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c
deleted file mode 100644
index 43558c2f5c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Simple webserver application for demonstrating the RNDIS demo and TCP/IP stack. This
- *  application will serve up a static HTTP web page when requested by the host.
- */
-
-#include "Webserver.h"
-
-/** HTTP server response header, for transmission before the page contents. This indicates to the host that a page exists at the
- *  given location, and gives extra connection information.
- */
-const char HTTP200Header[] PROGMEM = "HTTP/1.1 200 OK\r\n"
-                                     "Server: LUFA RNDIS\r\n"
-                                     "Content-type: text/html\r\n"
-                                     "Connection: close\r\n\r\n";
-
-/** HTTP server response header, for transmission before a resource not found error. This indicates to the host that the given
- *  given URL is invalid, and gives extra error information.
- */
-const char HTTP404Header[] PROGMEM = "HTTP/1.1 404 Not Found\r\n"
-                                     "Server: LUFA RNDIS\r\n"
-                                     "Connection: close\r\n\r\n";
-
-/** HTTP page to serve to the host when a HTTP request is made. This page is too long for a single response, thus it is automatically
- *  broken up into smaller blocks and sent as a series of packets each time the webserver application callback is run.
- */
-const char HTTPPage[] PROGMEM =
-		"<html>"
-		"	<head>"
-		"		<title>"
-		"			LUFA Webserver Demo"
-		"		</title>"
-		"	</head>"
-		"	<body>"
-		"		<h1>Hello from your USB AVR!</h1>"
-		"		<p>"
-		"			Hello! Welcome to the LUFA RNDIS Demo Webserver test page, running on your USB AVR via the LUFA library. This demonstrates the HTTP webserver, TCP/IP stack and RNDIS demo all running atop the LUFA USB stack."
-		"			<br /><br />"
-		"			<small>Project Information: <a href=\"http://www.lufa-lib.org\">http://www.lufa-lib.org</a>.</small>"
-		"			<hr />"
-		"			<i>LUFA Version: </i>" LUFA_VERSION_STRING
-		"		</p>"
-		"	</body>"
-		"</html>";
-
-
-/** Initializes the Webserver application, opening the appropriate HTTP port in the TCP handler and registering the application
- *  callback routine for packets sent to the HTTP protocol port.
- */
-void Webserver_Init(void)
-{
-	/* Open the HTTP port in the TCP protocol so that HTTP connections to the device can be established */
-	TCP_SetPortState(TCP_PORT_HTTP, TCP_Port_Open, Webserver_ApplicationCallback);
-}
-
-/** Indicates if a given request equals the given HTTP command.
- *
- *  \param[in] RequestHeader  HTTP request made by the host
- *  \param[in] Command        HTTP command to compare the request to
- *
- *  \return Boolean \c true if the command matches the request, \c false otherwise
- */
-static bool IsHTTPCommand(uint8_t* RequestHeader,
-                          char* Command)
-{
-	/* Returns true if the non null terminated string in RequestHeader matches the null terminated string Command */
-	return (strncmp((char*)RequestHeader, Command, strlen(Command)) == 0);
-}
-
-/** Application callback routine, executed each time the TCP processing task runs. This callback determines what request
- *  has been made (if any), and serves up appropriate responses.
- *
- *  \param[in] ConnectionState  Pointer to a TCP Connection State structure giving connection information
- *  \param[in,out] Buffer       Pointer to the application's send/receive packet buffer
- */
-void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState,
-                                   TCP_ConnectionBuffer_t* const Buffer)
-{
-	char*          BufferDataStr = (char*)Buffer->Data;
-	static uint8_t PageBlock     = 0;
-
-	/* Check to see if a packet has been received on the HTTP port from a remote host */
-	if (TCP_APP_HAS_RECEIVED_PACKET(Buffer))
-	{
-		if (IsHTTPCommand(Buffer->Data, "GET"))
-		{
-			if (IsHTTPCommand(Buffer->Data, "GET / "))
-			{
-				PageBlock = 0;
-
-				/* Copy the HTTP 200 response header into the packet buffer */
-				strcpy_P(BufferDataStr, HTTP200Header);
-
-				/* Send the buffer contents to the host */
-				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
-
-				/* Lock the buffer to Device->Host transmissions only while we send the page contents */
-				TCP_APP_CAPTURE_BUFFER(Buffer);
-			}
-			else
-			{
-				/* Copy the HTTP 404 response header into the packet buffer */
-				strcpy_P(BufferDataStr, HTTP404Header);
-
-				/* Send the buffer contents to the host */
-				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
-
-				/* All data sent, close the connection */
-				TCP_APP_CLOSECONNECTION(ConnectionState);
-			}
-		}
-		else if (IsHTTPCommand(Buffer->Data, "HEAD"))
-		{
-			if (IsHTTPCommand(Buffer->Data, "HEAD / "))
-			{
-				/* Copy the HTTP response header into the packet buffer */
-				strcpy_P(BufferDataStr, HTTP200Header);
-
-				/* Send the buffer contents to the host */
-				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
-			}
-			else
-			{
-				/* Copy the HTTP response header into the packet buffer */
-				strcpy_P(BufferDataStr, HTTP404Header);
-
-				/* Send the buffer contents to the host */
-				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
-			}
-
-			/* All data sent, close the connection */
-			TCP_APP_CLOSECONNECTION(ConnectionState);
-		}
-		else if (IsHTTPCommand(Buffer->Data, "TRACE"))
-		{
-			/* Echo the host's query back to the host */
-			TCP_APP_SEND_BUFFER(Buffer, Buffer->Length);
-
-			/* All data sent, close the connection */
-			TCP_APP_CLOSECONNECTION(ConnectionState);
-		}
-		else
-		{
-			/* Unknown request, just clear the buffer (drop the packet) */
-			TCP_APP_CLEAR_BUFFER(Buffer);
-		}
-	}
-	else if (TCP_APP_HAVE_CAPTURED_BUFFER(Buffer))
-	{
-		uint16_t RemLength = strlen_P(&HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE]);
-		uint16_t Length;
-
-		/* Determine the length of the loaded block */
-		Length = ((RemLength > HTTP_REPLY_BLOCK_SIZE) ? HTTP_REPLY_BLOCK_SIZE : RemLength);
-
-		/* Copy the next buffer sized block of the page to the packet buffer */
-		strncpy_P(BufferDataStr, &HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE], Length);
-
-		/* Send the buffer contents to the host */
-		TCP_APP_SEND_BUFFER(Buffer, Length);
-
-		/* Check to see if the entire page has been sent */
-		if (PageBlock++ == (sizeof(HTTPPage) / HTTP_REPLY_BLOCK_SIZE))
-		{
-			/* Unlock the buffer so that the host can fill it with future packets */
-			TCP_APP_RELEASE_BUFFER(Buffer);
-
-			/* Close the connection to the host */
-			TCP_APP_CLOSECONNECTION(ConnectionState);
-		}
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h
deleted file mode 100644
index 142dc7a039..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Webserver.c.
- */
-
-#ifndef _WEBSERVER_H_
-#define _WEBSERVER_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Version.h>
-
-		#include "TCP.h"
-
-	/* Macros: */
-		/** Maximum size of a HTTP response per transmission */
-		#define HTTP_REPLY_BLOCK_SIZE     128
-
-	/* Function Prototypes: */
-		void Webserver_Init(void);
-		void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState,
-		                                   TCP_ConnectionBuffer_t* const Buffer);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c
deleted file mode 100644
index bdb5061178..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the RNDISEthernet demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "RNDISEthernet.h"
-
-/** Message buffer for RNDIS messages processed by the RNDIS device class driver. */
-static uint8_t RNDIS_Message_Buffer[192];
-
-/** Global to store the incoming frame from the host before it is processed by the device. */
-static Ethernet_Frame_Info_t FrameIN;
-
-/** Global to store the outgoing frame created in the device before it is sent to the host. */
-static Ethernet_Frame_Info_t FrameOUT;
-
-/** LUFA RNDIS Class driver interface configuration and state information. This structure is
- *  passed to all RNDIS Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface =
-	{
-		.Config =
-			{
-				.ControlInterfaceNumber         = INTERFACE_ID_CDC_CCI,
-				.DataINEndpoint                 =
-					{
-						.Address                = CDC_TX_EPADDR,
-						.Size                   = CDC_TXRX_EPSIZE,
-						.Banks                  = 1,
-					},
-				.DataOUTEndpoint                =
-					{
-						.Address                = CDC_RX_EPADDR,
-						.Size                   = CDC_TXRX_EPSIZE,
-						.Banks                  = 1,
-					},
-				.NotificationEndpoint           =
-					{
-						.Address                = CDC_NOTIFICATION_EPADDR,
-						.Size                   = CDC_NOTIFICATION_EPSIZE,
-						.Banks                  = 1,
-					},
-				.AdapterVendorDescription       = "LUFA RNDIS Demo Adapter",
-				.AdapterMACAddress              = {ADAPTER_MAC_ADDRESS},
-				.MessageBuffer                  = RNDIS_Message_Buffer,
-				.MessageBufferLength            = sizeof(RNDIS_Message_Buffer),
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	TCP_Init();
-	Webserver_Init();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		if (RNDIS_Device_IsPacketReceived(&Ethernet_RNDIS_Interface))
-		{
-			LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-			RNDIS_Device_ReadPacket(&Ethernet_RNDIS_Interface, &FrameIN.FrameData, &FrameIN.FrameLength);
-			Ethernet_ProcessPacket(&FrameIN, &FrameOUT);
-
-			if (FrameOUT.FrameLength)
-			{
-				RNDIS_Device_SendPacket(&Ethernet_RNDIS_Interface, &FrameOUT.FrameData, FrameOUT.FrameLength);
-				FrameOUT.FrameLength = 0;
-			}
-
-			LEDs_SetAllLEDs(LEDMASK_USB_READY);
-		}
-
-		TCP_TCPTask(&Ethernet_RNDIS_Interface, &FrameOUT);
-
-		RNDIS_Device_USBTask(&Ethernet_RNDIS_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	Serial_Init(9600, false);
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= RNDIS_Device_ConfigureEndpoints(&Ethernet_RNDIS_Interface);
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	RNDIS_Device_ProcessControlRequest(&Ethernet_RNDIS_Interface);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h
deleted file mode 100644
index 56000547f6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for RNDISEthernet.c.
- */
-
-#ifndef _RNDISETHERNET_H_
-#define _RNDISETHERNET_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include "Lib/Ethernet.h"
-		#include "Lib/TCP.h"
-		#include "Lib/ARP.h"
-		#include "Lib/Webserver.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY          LEDS_LED2
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt
deleted file mode 100644
index 496ab07a1d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt
+++ /dev/null
@@ -1,146 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage RNDIS Class Ethernet Demo (with Webserver/Telnet)
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>Microsoft RNDIS Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Remote Network Driver Interface demonstration application.
- *  This gives a simple reference application for implementing
- *  a CDC RNDIS device acting as a simple network interface for
- *  ethernet packet exchange. RNDIS is a proprietary Microsoft
- *  standard; this demo will only work on Windows 2000 (manually
- *  patched with the Microsoft RNDIS hotfix) and above (with no
- *  manual patches), or on the latest Linux kernels.
- *
- *  Before running, you will need to install the INF file that
- *  is located in the RNDISEthernet project directory. This will
- *  enable Windows to use its inbuilt RNDIS drivers, negating the
- *  need for special Windows drivers for the device. To install,
- *  right-click the .INF file and choose the Install option. If
- *  Windows 2000 is used, the Microsoft INF file in the hotfix
- *  will need to be altered to use the VID/PID of the demo and
- *  then chosen instead of the LUFA RNDIS INF file when prompted.
- *
- *  When enumerated, this demo will install as a new network
- *  adapter which ethernet packets can be sent to and received
- *  from. Running on top of the adapter is a very simple TCP/IP
- *  stack with a HTTP webserver and TELNET host which can be
- *  accessed through a web browser at IP address 10.0.0.2:80 or
- *  through a TELNET client at 10.0.0.2:25. This device also supports
- *  ping echos via the ICMP protocol.
- *
- *  \note The TCP/IP stack in this demo has a number of limitations
- *  and should serve as an example only - it is not fully featured nor
- *  compliant to the TCP/IP specification. For complete projects, it is
- *  recommended that it be replaced with an external open source TCP/IP
- *  stack that is feature complete, such as the uIP stack.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>CLIENT_IP_ADDRESS</td>
- *    <td>AppConfig.h</td>
- *    <td>Configures the IP address given to the client (PC) via the DHCP server.</td>
- *   </tr>
- *   <tr>
- *    <td>SERVER_IP_ADDRESS</td>
- *    <td>AppConfig.h</td>
- *    <td>Configures the IP address of the virtual server.</td>
- *   </tr>
- *   <tr>
- *    <td>ADAPTER_MAC_ADDRESS</td>
- *    <td>AppConfig.h</td>
- *    <td>Configures the MAC address of the RNDIS adapter on the host (PC) side.</td>
- *   </tr>
- *   <tr>
- *    <td>SERVER_MAC_ADDRESS</td>
- *    <td>AppConfig.h</td>
- *    <td>Configures the MAC address of the virtual server on the network.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_ETHERNET</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_ARP</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_IP</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_ICMP</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_TCP</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_UDP</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_DHCP</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/asf.xml
deleted file mode 100644
index 8a85bf948b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/asf.xml
+++ /dev/null
@@ -1,80 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="RNDIS Ethernet Device Demo (Class Driver APIs)" id="lufa.demos.device.class.rndis.example.avr8">

-		<require idref="lufa.demos.device.class.rndis"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="RNDIS Ethernet Device Demo (Class Driver APIs)" id="lufa.demos.device.class.rndis.example.xmega">

-		<require idref="lufa.demos.device.class.rndis"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.rndis" caption="RNDIS Ethernet Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Microsoft RNDIS Ethernet networking device demo, implementing a basic HTTP webserver. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="RNDIS Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="c-source" value="RNDISEthernet.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="c-source" value="Lib/ARP.c"/>

-		<build type="c-source" value="Lib/DHCP.c"/>

-		<build type="c-source" value="Lib/Ethernet.c"/>

-		<build type="c-source" value="Lib/ICMP.c"/>

-		<build type="c-source" value="Lib/IP.c"/>

-		<build type="c-source" value="Lib/ProtocolDecoders.c"/>

-		<build type="c-source" value="Lib/TCP.c"/>

-		<build type="c-source" value="Lib/UDP.c"/>

-		<build type="c-source" value="Lib/Webserver.c"/>

-		<build type="header-file" value="RNDISEthernet.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="header-file" value="Lib/ARP.h"/>

-		<build type="header-file" value="Lib/DHCP.h"/>

-		<build type="header-file" value="Lib/Ethernet.h"/>

-		<build type="header-file" value="Lib/ICMP.h"/>

-		<build type="header-file" value="Lib/IP.h"/>

-		<build type="header-file" value="Lib/ProtocolDecoders.h"/>

-		<build type="header-file" value="Lib/TCP.h"/>

-		<build type="header-file" value="Lib/UDP.h"/>

-		<build type="header-file" value="Lib/Webserver.h"/>

-		<build type="header-file" value="Lib/EthernetProtocols.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/doxyfile
deleted file mode 100644
index 9147230ecc..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - RNDIS Ethernet Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/makefile
deleted file mode 100644
index 7d16d42684..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/RNDISEthernet/makefile
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = RNDISEthernet
-SRC          = $(TARGET).c Descriptors.c Lib/Ethernet.c Lib/ProtocolDecoders.c Lib/ICMP.c Lib/TCP.c Lib/UDP.c Lib/DHCP.c Lib/ARP.c \
-               Lib/IP.c Lib/Webserver.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/Config/LUFAConfig.h
deleted file mode 100644
index 3c3b68bb1a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               4
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c
deleted file mode 100644
index 3141512268..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = CDC_CSCP_CDCClass,
-	.SubClass               = CDC_CSCP_NoSpecificSubclass,
-	.Protocol               = CDC_CSCP_NoSpecificProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2044,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 2,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.CDC_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x06,
-		},
-
-	.CDC_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
-		},
-
-	.CDC_NotificationEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA CDC Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h
deleted file mode 100644
index 733d08dc25..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Macros: */
-		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 2)
-
-		/** Endpoint address of the CDC device-to-host data IN endpoint. */
-		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
-		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPSIZE        8
-
-		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                16
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t    Config;
-
-			// CDC Control Interface
-			USB_Descriptor_Interface_t               CDC_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
-			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
-
-			// CDC Data Interface
-			USB_Descriptor_Interface_t               CDC_DCI_Interface;
-			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
-			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/LUFA VirtualSerial.inf b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/LUFA VirtualSerial.inf
deleted file mode 100644
index 21d2d12b6e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/LUFA VirtualSerial.inf
+++ /dev/null
@@ -1,66 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-;************************************************************
-
-[DefaultInstall]
-CopyINF="LUFA VirtualSerial.inf"
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-DriverVer=7/1/2012,10.0.0.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
-
-[SourceDisksNames]
-
-[SourceDisksFiles]
-
-[DestinationDirs]
-DefaultDestDir=12
-
-[DriverInstall]
-Include=mdmcpq.inf
-CopyFiles=FakeModemCopyFileSection
-AddReg=DriverInstall.AddReg
-
-[DriverInstall.Services]
-Include=mdmcpq.inf
-AddService=usbser, 0x00000002, LowerFilter_Service_Inst
-
-[DriverInstall.AddReg]
-HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
-
-[DeviceList.NTx86]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
-
-[DeviceList.NTia64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGNAME="http://www.lufa-lib.org"
-DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c
deleted file mode 100644
index 2d98df7607..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the VirtualSerial demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "VirtualSerial.h"
-
-/** LUFA CDC Class driver interface configuration and state information. This structure is
- *  passed to all CDC Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
-	{
-		.Config =
-			{
-				.ControlInterfaceNumber   = INTERFACE_ID_CDC_CCI,
-				.DataINEndpoint           =
-					{
-						.Address          = CDC_TX_EPADDR,
-						.Size             = CDC_TXRX_EPSIZE,
-						.Banks            = 1,
-					},
-				.DataOUTEndpoint =
-					{
-						.Address          = CDC_RX_EPADDR,
-						.Size             = CDC_TXRX_EPSIZE,
-						.Banks            = 1,
-					},
-				.NotificationEndpoint =
-					{
-						.Address          = CDC_NOTIFICATION_EPADDR,
-						.Size             = CDC_NOTIFICATION_EPSIZE,
-						.Banks            = 1,
-					},
-			},
-	};
-
-/** Standard file stream for the CDC interface when set up, so that the virtual CDC COM port can be
- *  used like any regular character stream in the C APIs.
- */
-static FILE USBSerialStream;
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	/* Create a regular character stream for the interface so that it can be used with the stdio.h functions */
-	CDC_Device_CreateStream(&VirtualSerial_CDC_Interface, &USBSerialStream);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		CheckJoystickMovement();
-
-		/* Must throw away unused bytes from the host, or it will lock up while waiting for the device */
-		CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
-
-		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Checks for changes in the position of the board joystick, sending strings to the host upon each change. */
-void CheckJoystickMovement(void)
-{
-	uint8_t     JoyStatus_LCL = Joystick_GetStatus();
-	char*       ReportString  = NULL;
-	static bool ActionSent    = false;
-
-	if (JoyStatus_LCL & JOY_UP)
-	  ReportString = "Joystick Up\r\n";
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  ReportString = "Joystick Down\r\n";
-	else if (JoyStatus_LCL & JOY_LEFT)
-	  ReportString = "Joystick Left\r\n";
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  ReportString = "Joystick Right\r\n";
-	else if (JoyStatus_LCL & JOY_PRESS)
-	  ReportString = "Joystick Pressed\r\n";
-	else
-	  ActionSent = false;
-
-	if ((ReportString != NULL) && (ActionSent == false))
-	{
-		ActionSent = true;
-
-		/* Write the string to the virtual COM port via the created character stream */
-		fputs(ReportString, &USBSerialStream);
-
-		/* Alternatively, without the stream: */
-		// CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString);
-	}
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h
deleted file mode 100644
index ad4f74f31a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for VirtualSerial.c.
- */
-
-#ifndef _VIRTUALSERIAL_H_
-#define _VIRTUALSERIAL_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <string.h>
-		#include <stdio.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void CheckJoystickMovement(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt
deleted file mode 100644
index 61b665674f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Communications Device Class (Virtual Serial Port) Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Communications Device Class demonstration application.
- *  This gives a simple reference application for implementing
- *  a CDC device acting as a virtual serial port. Joystick
- *  actions are transmitted to the host as strings. The device
- *  does not respond to serial data sent from the host.
- *
- *  After running this demo for the first time on a new computer,
- *  you will need to supply the .INF file located in this demo
- *  project's directory as the device's driver when running under
- *  Windows. This will enable Windows to use its inbuilt CDC drivers,
- *  negating the need for custom drivers for the device. Other
- *  Operating Systems should automatically use their own inbuilt
- *  CDC-ACM drivers.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/asf.xml
deleted file mode 100644
index 4839b7c5f8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/asf.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Virtual Serial CDC Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc.example.avr8">

-		<require idref="lufa.demos.device.class.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Virtual Serial CDC Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc.example.xmega">

-		<require idref="lufa.demos.device.class.cdc"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.cdc" caption="Virtual Serial CDC Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Virtual Serial device demo, implementing a virtual serial channel between the host PC and the device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="CDC Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="VirtualSerial.txt"/>

-		<build type="distribute" subtype="user-file" value="LUFA VirtualSerial.inf"/>

-

-		<build type="c-source" value="VirtualSerial.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="VirtualSerial.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.joystick"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/doxyfile
deleted file mode 100644
index 0d0ae156c2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Virtual Serial Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/makefile
deleted file mode 100644
index d476b575c3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerial/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = VirtualSerial
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/AppConfig.h
deleted file mode 100644
index 4be9d2b6b1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/AppConfig.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define TOTAL_LUNS                1
-
-	#define DISK_READ_ONLY            false
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/LUFAConfig.h
deleted file mode 100644
index 58fd4bb5a6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               5
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c
deleted file mode 100644
index 18533fda2d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_IADDeviceClass,
-	.SubClass               = USB_CSCP_IADDeviceSubclass,
-	.Protocol               = USB_CSCP_IADDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2068,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 3,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.CDC_IAD =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
-
-			.FirstInterfaceIndex    = INTERFACE_ID_CDC_CCI,
-			.TotalInterfaces        = 2,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.IADStrIndex            = NO_DESCRIPTOR
-		},
-
-	.CDC_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x06,
-		},
-
-	.CDC_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
-		},
-
-	.CDC_NotificationEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.MS_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_MassStorage,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = MS_CSCP_MassStorageClass,
-			.SubClass               = MS_CSCP_SCSITransparentSubclass,
-			.Protocol               = MS_CSCP_BulkOnlyTransportProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.MS_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MASS_STORAGE_IN_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.MS_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MASS_STORAGE_OUT_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA CDC and Mass Storage Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h
deleted file mode 100644
index d764bf45fe..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 1)
-
-		/** Endpoint address of the CDC device-to-host data IN endpoint. */
-		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 2)
-
-		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
-		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 3)
-
-		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPSIZE        8
-
-		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                16
-
-		/** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
-		#define MASS_STORAGE_IN_EPADDR         (ENDPOINT_DIR_IN  | 4)
-
-		/** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */
-		#define MASS_STORAGE_OUT_EPADDR        (ENDPOINT_DIR_OUT | 5)
-
-		/** Size in bytes of the Mass Storage data endpoints. */
-		#define MASS_STORAGE_IO_EPSIZE         64
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t    Config;
-
-			// CDC Control Interface
-			USB_Descriptor_Interface_Association_t   CDC_IAD;
-			USB_Descriptor_Interface_t               CDC_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
-			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
-
-			// CDC Data Interface
-			USB_Descriptor_Interface_t               CDC_DCI_Interface;
-			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
-
-			// Mass Storage Interface
-			USB_Descriptor_Interface_t               MS_Interface;
-			USB_Descriptor_Endpoint_t                MS_DataInEndpoint;
-			USB_Descriptor_Endpoint_t                MS_DataOutEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_CDC_CCI     = 0, /**< CDC CCI interface descriptor ID */
-			INTERFACE_ID_CDC_DCI     = 1, /**< CDC DCI interface descriptor ID */
-			INTERFACE_ID_MassStorage = 2, /**< Mass storage interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/LUFA VirtualSerialMassStorage.inf b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/LUFA VirtualSerialMassStorage.inf
deleted file mode 100644
index e5d8da5e38..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/LUFA VirtualSerialMassStorage.inf
+++ /dev/null
@@ -1,66 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-;************************************************************
-
-[DefaultInstall]
-CopyINF="LUFA VirtualSerialMassStorage.inf"
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-DriverVer=7/1/2012,10.0.0.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
-
-[SourceDisksNames]
-
-[SourceDisksFiles]
-
-[DestinationDirs]
-DefaultDestDir=12
-
-[DriverInstall]
-Include=mdmcpq.inf
-CopyFiles=FakeModemCopyFileSection
-AddReg=DriverInstall.AddReg
-
-[DriverInstall.Services]
-Include=mdmcpq.inf
-AddService=usbser, 0x00000002, LowerFilter_Service_Inst
-
-[DriverInstall.AddReg]
-HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2068&MI_00
-
-[DeviceList.NTx86]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2068&MI_00
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2068&MI_00
-
-[DeviceList.NTia64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2068&MI_00
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGNAME="http://www.lufa-lib.org"
-DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.c
deleted file mode 100644
index d28eff298b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.c
+++ /dev/null
@@ -1,534 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Functions to manage the physical Dataflash media, including reading and writing of
- *  blocks of data. These functions are called by the SCSI layer when data must be stored
- *  or retrieved to/from the physical storage media. If a different media is used (such
- *  as a SD card or EEPROM), functions similar to these will need to be generated.
- */
-
-#define  INCLUDE_FROM_DATAFLASHMANAGER_C
-#include "DataflashManager.h"
-
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
- *  the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes
- *  them to the Dataflash in Dataflash page sized blocks.
- *
- *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
- *  \param[in] BlockAddress  Data block starting address for the write sequence
- *  \param[in] TotalBlocks   Number of blocks of data to write
- */
-void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                  const uint32_t BlockAddress,
-                                  uint16_t TotalBlocks)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-	bool     UsingSecondBuffer   = false;
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the Dataflash buffer */
-	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
-	Dataflash_SendAddressBytes(CurrDFPage, 0);
-	Dataflash_WaitWhileBusy();
-#endif
-
-	/* Send the Dataflash buffer write command */
-	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
-	Dataflash_SendAddressBytes(0, CurrDFPageByte);
-
-	/* Wait until endpoint is ready before continuing */
-	if (Endpoint_WaitUntilReady())
-	  return;
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if the endpoint is currently empty */
-			if (!(Endpoint_IsReadWriteAllowed()))
-			{
-				/* Clear the current endpoint bank */
-				Endpoint_ClearOUT();
-
-				/* Wait until the host has sent another packet */
-				if (Endpoint_WaitUntilReady())
-				  return;
-			}
-
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Write the Dataflash buffer contents back to the Dataflash page */
-				Dataflash_WaitWhileBusy();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
-				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
-				  UsingSecondBuffer = !(UsingSecondBuffer);
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
-				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
-				{
-					/* Copy selected dataflash's current page contents to the Dataflash buffer */
-					Dataflash_WaitWhileBusy();
-					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
-					Dataflash_SendAddressBytes(CurrDFPage, 0);
-					Dataflash_WaitWhileBusy();
-				}
-#endif
-
-				/* Send the Dataflash buffer write command */
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
-				Dataflash_SendAddressBytes(0, 0);
-			}
-
-			/* Write one 16-byte chunk of data to the Dataflash */
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-
-			/* Check if the current command is being aborted by the host */
-			if (MSInterfaceInfo->State.IsMassStoreReset)
-			  return;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Write the Dataflash buffer contents back to the Dataflash page */
-	Dataflash_WaitWhileBusy();
-	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
-	Dataflash_WaitWhileBusy();
-
-	/* If the endpoint is empty, clear it ready for the next packet from the host */
-	if (!(Endpoint_IsReadWriteAllowed()))
-	  Endpoint_ClearOUT();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
- *  the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash
- *  and writes them in OS sized blocks to the endpoint.
- *
- *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
- *  \param[in] BlockAddress  Data block starting address for the read sequence
- *  \param[in] TotalBlocks   Number of blocks of data to read
- */
-void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                 const uint32_t BlockAddress,
-                                 uint16_t TotalBlocks)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-	/* Send the Dataflash main memory page read command */
-	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-
-	/* Wait until endpoint is ready before continuing */
-	if (Endpoint_WaitUntilReady())
-	  return;
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if the endpoint is currently full */
-			if (!(Endpoint_IsReadWriteAllowed()))
-			{
-				/* Clear the endpoint bank to send its contents to the host */
-				Endpoint_ClearIN();
-
-				/* Wait until the endpoint is ready for more data */
-				if (Endpoint_WaitUntilReady())
-				  return;
-			}
-
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-				/* Send the Dataflash main memory page read command */
-				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-			}
-
-			/* Read one 16-byte chunk of data from the Dataflash */
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-
-			/* Check if the current command is being aborted by the host */
-			if (MSInterfaceInfo->State.IsMassStoreReset)
-			  return;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* If the endpoint is full, send its contents to the host */
-	if (!(Endpoint_IsReadWriteAllowed()))
-	  Endpoint_ClearIN();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
- *  the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the
- *  Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
- *  Dataflash.
- *
- *  \param[in] BlockAddress  Data block starting address for the write sequence
- *  \param[in] TotalBlocks   Number of blocks of data to write
- *  \param[in] BufferPtr     Pointer to the data source RAM buffer
- */
-void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
-                                      uint16_t TotalBlocks,
-                                      uint8_t* BufferPtr)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-	bool     UsingSecondBuffer   = false;
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the Dataflash buffer */
-	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
-	Dataflash_SendAddressBytes(CurrDFPage, 0);
-	Dataflash_WaitWhileBusy();
-#endif
-
-	/* Send the Dataflash buffer write command */
-	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
-	Dataflash_SendAddressBytes(0, CurrDFPageByte);
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Write the Dataflash buffer contents back to the Dataflash page */
-				Dataflash_WaitWhileBusy();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
-				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
-				  UsingSecondBuffer = !(UsingSecondBuffer);
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
-				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
-				{
-					/* Copy selected dataflash's current page contents to the Dataflash buffer */
-					Dataflash_WaitWhileBusy();
-					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
-					Dataflash_SendAddressBytes(CurrDFPage, 0);
-					Dataflash_WaitWhileBusy();
-				}
-#endif
-
-				/* Send the Dataflash buffer write command */
-				Dataflash_ToggleSelectedChipCS();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
-				Dataflash_SendAddressBytes(0, 0);
-			}
-
-			/* Write one 16-byte chunk of data to the Dataflash */
-			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
-			  Dataflash_SendByte(*(BufferPtr++));
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Write the Dataflash buffer contents back to the Dataflash page */
-	Dataflash_WaitWhileBusy();
-	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
-	Dataflash_WaitWhileBusy();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
- *  the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash
- *  and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read
- *  the files stored on the Dataflash.
- *
- *  \param[in] BlockAddress  Data block starting address for the read sequence
- *  \param[in] TotalBlocks   Number of blocks of data to read
- *  \param[out] BufferPtr    Pointer to the data destination RAM buffer
- */
-void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
-                                     uint16_t TotalBlocks,
-                                     uint8_t* BufferPtr)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-	/* Send the Dataflash main memory page read command */
-	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-				/* Send the Dataflash main memory page read command */
-				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-			}
-
-			/* Read one 16-byte chunk of data from the Dataflash */
-			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
-			  *(BufferPtr++) = Dataflash_ReceiveByte();
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
-void DataflashManager_ResetDataflashProtections(void)
-{
-	/* Select first Dataflash chip, send the read status register command */
-	Dataflash_SelectChip(DATAFLASH_CHIP1);
-	Dataflash_SendByte(DF_CMD_GETSTATUS);
-
-	/* Check if sector protection is enabled */
-	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
-	{
-		Dataflash_ToggleSelectedChipCS();
-
-		/* Send the commands to disable sector protection */
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
-	}
-
-	/* Select second Dataflash chip (if present on selected board), send read status register command */
-	#if (DATAFLASH_TOTALCHIPS == 2)
-	Dataflash_SelectChip(DATAFLASH_CHIP2);
-	Dataflash_SendByte(DF_CMD_GETSTATUS);
-
-	/* Check if sector protection is enabled */
-	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
-	{
-		Dataflash_ToggleSelectedChipCS();
-
-		/* Send the commands to disable sector protection */
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
-	}
-	#endif
-
-	/* Deselect current Dataflash chip */
-	Dataflash_DeselectChip();
-}
-
-/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working.
- *
- *  \return Boolean \c true if all media chips are working, \c false otherwise
- */
-bool DataflashManager_CheckDataflashOperation(void)
-{
-	uint8_t ReturnByte;
-
-	/* Test first Dataflash IC is present and responding to commands */
-	Dataflash_SelectChip(DATAFLASH_CHIP1);
-	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
-	ReturnByte = Dataflash_ReceiveByte();
-	Dataflash_DeselectChip();
-
-	/* If returned data is invalid, fail the command */
-	if (ReturnByte != DF_MANUFACTURER_ATMEL)
-	  return false;
-
-	#if (DATAFLASH_TOTALCHIPS == 2)
-	/* Test second Dataflash IC is present and responding to commands */
-	Dataflash_SelectChip(DATAFLASH_CHIP2);
-	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
-	ReturnByte = Dataflash_ReceiveByte();
-	Dataflash_DeselectChip();
-
-	/* If returned data is invalid, fail the command */
-	if (ReturnByte != DF_MANUFACTURER_ATMEL)
-	  return false;
-	#endif
-
-	return true;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h
deleted file mode 100644
index 4737245a1d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DataflashManager.c.
- */
-
-#ifndef _DATAFLASH_MANAGER_H_
-#define _DATAFLASH_MANAGER_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-
-		#include "../VirtualSerialMassStorage.h"
-		#include "../Descriptors.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Common/Common.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/Dataflash.h>
-
-	/* Preprocessor Checks: */
-		#if (DATAFLASH_PAGE_SIZE % 16)
-			#error Dataflash page size must be a multiple of 16 bytes.
-		#endif
-
-	/* Defines: */
-		/** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */
-		#define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
-
-		/** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
-		 *  storage media (Dataflash) using a different native block size. Do not change this value.
-		 */
-		#define VIRTUAL_MEMORY_BLOCK_SIZE           512
-
-		/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not
-		 *  change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size.
-		 */
-		#define VIRTUAL_MEMORY_BLOCKS               (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
-
-		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
-		#define LUN_MEDIA_BLOCKS         (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
-
-	/* Function Prototypes: */
-		void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-		                                  const uint32_t BlockAddress,
-		                                  uint16_t TotalBlocks);
-		void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-		                                 const uint32_t BlockAddress,
-		                                 uint16_t TotalBlocks);
-		void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
-		                                      uint16_t TotalBlocks,
-		                                      uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
-		void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
-		                                     uint16_t TotalBlocks,
-		                                     uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
-		void DataflashManager_ResetDataflashProtections(void);
-		bool DataflashManager_CheckDataflashOperation(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.c
deleted file mode 100644
index 122e388722..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  SCSI command processing routines, for SCSI commands issued by the host. Mass Storage
- *  devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information,
- *  which wrap around standard SCSI device commands for controlling the actual storage medium.
- */
-
-#define  INCLUDE_FROM_SCSI_C
-#include "SCSI.h"
-
-/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
- *  features and capabilities.
- */
-static const SCSI_Inquiry_Response_t InquiryData =
-	{
-		.DeviceType          = DEVICE_TYPE_BLOCK,
-		.PeripheralQualifier = 0,
-
-		.Removable           = true,
-
-		.Version             = 0,
-
-		.ResponseDataFormat  = 2,
-		.NormACA             = false,
-		.TrmTsk              = false,
-		.AERC                = false,
-
-		.AdditionalLength    = 0x1F,
-
-		.SoftReset           = false,
-		.CmdQue              = false,
-		.Linked              = false,
-		.Sync                = false,
-		.WideBus16Bit        = false,
-		.WideBus32Bit        = false,
-		.RelAddr             = false,
-
-		.VendorID            = "LUFA",
-		.ProductID           = "Dataflash Disk",
-		.RevisionID          = {'0','.','0','0'},
-	};
-
-/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE
- *  command is issued. This gives information on exactly why the last command failed to complete.
- */
-static SCSI_Request_Sense_Response_t SenseData =
-	{
-		.ResponseCode        = 0x70,
-		.AdditionalLength    = 0x0A,
-	};
-
-
-/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches
- *  to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns
- *  a command failure due to a ILLEGAL REQUEST.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise
- */
-bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	bool CommandSuccess = false;
-
-	/* Run the appropriate SCSI command hander function based on the passed command */
-	switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0])
-	{
-		case SCSI_CMD_INQUIRY:
-			CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_REQUEST_SENSE:
-			CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_READ_CAPACITY_10:
-			CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_SEND_DIAGNOSTIC:
-			CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_WRITE_10:
-			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE);
-			break;
-		case SCSI_CMD_READ_10:
-			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ);
-			break;
-		case SCSI_CMD_MODE_SENSE_6:
-			CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_START_STOP_UNIT:
-		case SCSI_CMD_TEST_UNIT_READY:
-		case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-		case SCSI_CMD_VERIFY_10:
-			/* These commands should just succeed, no handling required */
-			CommandSuccess = true;
-			MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
-			break;
-		default:
-			/* Update the SENSE key to reflect the invalid command */
-			SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		                   SCSI_ASENSE_INVALID_COMMAND,
-		                   SCSI_ASENSEQ_NO_QUALIFIER);
-			break;
-	}
-
-	/* Check if command was successfully processed */
-	if (CommandSuccess)
-	{
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD,
-		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return true;
-	}
-
-	return false;
-}
-
-/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features
- *  and capabilities to the host.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint16_t AllocationLength  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]);
-	uint16_t BytesTransferred  = MIN(AllocationLength, sizeof(InquiryData));
-
-	/* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */
-	if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||
-	     MSInterfaceInfo->State.CommandBlock.SCSICommandData[2])
-	{
-		/* Optional but unsupported bits set - update the SENSE key and fail the request */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL);
-
-	/* Pad out remaining bytes with 0x00 */
-	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
-
-	/* Finalize the stream transfer to send the last packet */
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command,
- *  including the error code and additional error information so that the host can determine why a command failed to complete.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint8_t  AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];
-	uint8_t  BytesTransferred = MIN(AllocationLength, sizeof(SenseData));
-
-	Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL);
-	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity
- *  on the selected Logical Unit (drive), as a number of OS-sized blocks.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint32_t LastBlockAddressInLUN = (LUN_MEDIA_BLOCKS - 1);
-	uint32_t MediaBlockSize        = VIRTUAL_MEMORY_BLOCK_SIZE;
-
-	Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL);
-	Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL);
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the
- *  board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is
- *  supported.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	/* Check to see if the SELF TEST bit is not set */
-	if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2)))
-	{
-		/* Only self-test supported - update SENSE key and fail the command */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Check to see if all attached Dataflash ICs are functional */
-	if (!(DataflashManager_CheckDataflashOperation()))
-	{
-		/* Update SENSE key with a hardware error condition and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR,
-		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address
- *  and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual
- *  reading and writing of the data.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *  \param[in] IsDataRead  Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                      const bool IsDataRead)
-{
-	uint32_t BlockAddress;
-	uint16_t TotalBlocks;
-
-	/* Check if the disk is write protected or not */
-	if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY)
-	{
-		/* Block address is invalid, update SENSE key and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT,
-		               SCSI_ASENSE_WRITE_PROTECTED,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
-	BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);
-
-	/* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */
-	TotalBlocks  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]);
-
-	/* Check if the block address is outside the maximum allowable value for the LUN */
-	if (BlockAddress >= LUN_MEDIA_BLOCKS)
-	{
-		/* Block address is invalid, update SENSE key and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	#if (TOTAL_LUNS > 1)
-	/* Adjust the given block address to the real media address based on the selected LUN */
-	BlockAddress += ((uint32_t)MSInterfaceInfo->State.CommandBlock.LUN * LUN_MEDIA_BLOCKS);
-	#endif
-
-	/* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
-	if (IsDataRead == DATA_READ)
-	  DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
-	else
-	  DataflashManager_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
-
-	/* Update the bytes transferred counter and succeed the command */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);
-
-	return true;
-}
-
-/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about
- *  the SCSI device, as well as the device's Write Protect status.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	/* Send an empty header response with the Write Protect flag status */
-	Endpoint_Write_8(0x00);
-	Endpoint_Write_8(0x00);
-	Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00);
-	Endpoint_Write_8(0x00);
-	Endpoint_ClearIN();
-
-	/* Update the bytes transferred counter and succeed the command */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4;
-
-	return true;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.h
deleted file mode 100644
index d26a82bdeb..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for SCSI.c.
- */
-
-#ifndef _SCSI_H_
-#define _SCSI_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "../VirtualSerialMassStorage.h"
-		#include "../Descriptors.h"
-		#include "DataflashManager.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
-		 *  is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
-		 *  the last command failure) in a quick and easy manner.
-		 *
-		 *  \param[in] Key    New SCSI sense key to set the sense code to
-		 *  \param[in] Acode  New SCSI additional sense key to set the additional sense code to
-		 *  \param[in] Aqual  New SCSI additional sense key qualifier to set the additional sense qualifier code to
-		 */
-		#define SCSI_SET_SENSE(Key, Acode, Aqual)  do { SenseData.SenseKey                 = (Key);   \
-		                                                SenseData.AdditionalSenseCode      = (Acode); \
-		                                                SenseData.AdditionalSenseQualifier = (Aqual); } while (0)
-
-		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */
-		#define DATA_READ           true
-
-		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */
-		#define DATA_WRITE          false
-
-		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */
-		#define DEVICE_TYPE_BLOCK   0x00
-
-		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */
-		#define DEVICE_TYPE_CDROM   0x05
-
-	/* Function Prototypes: */
-		bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-
-		#if defined(INCLUDE_FROM_SCSI_C)
-			static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-			                                      const bool IsDataRead);
-			static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c
deleted file mode 100644
index 1d20283164..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the VirtualSerialMassStorage demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "VirtualSerialMassStorage.h"
-
-/** LUFA CDC Class driver interface configuration and state information. This structure is
- *  passed to all CDC Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
-	{
-		.Config =
-			{
-				.ControlInterfaceNumber         = INTERFACE_ID_CDC_CCI,
-				.DataINEndpoint                 =
-					{
-						.Address                = CDC_TX_EPADDR,
-						.Size                   = CDC_TXRX_EPSIZE,
-						.Banks                  = 1,
-					},
-				.DataOUTEndpoint                =
-					{
-						.Address                = CDC_RX_EPADDR,
-						.Size                   = CDC_TXRX_EPSIZE,
-						.Banks                  = 1,
-					},
-				.NotificationEndpoint           =
-					{
-						.Address                = CDC_NOTIFICATION_EPADDR,
-						.Size                   = CDC_NOTIFICATION_EPSIZE,
-						.Banks                  = 1,
-					},
-			},
-	};
-
-/** LUFA Mass Storage Class driver interface configuration and state information. This structure is
- *  passed to all Mass Storage Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_MS_Device_t Disk_MS_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber                = INTERFACE_ID_MassStorage,
-				.DataINEndpoint                 =
-					{
-						.Address                = MASS_STORAGE_IN_EPADDR,
-						.Size                   = MASS_STORAGE_IO_EPSIZE,
-						.Banks                  = 1,
-					},
-				.DataOUTEndpoint                =
-					{
-						.Address                = MASS_STORAGE_OUT_EPADDR,
-						.Size                   = MASS_STORAGE_IO_EPSIZE,
-						.Banks                  = 1,
-					},
-				.TotalLUNs                      = TOTAL_LUNS,
-			},
-	};
-
-/** Standard file stream for the CDC interface when set up, so that the virtual CDC COM port can be
- *  used like any regular character stream in the C APIs.
- */
-static FILE USBSerialStream;
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	/* Create a regular character stream for the interface so that it can be used with the stdio.h functions */
-	CDC_Device_CreateStream(&VirtualSerial_CDC_Interface, &USBSerialStream);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		CheckJoystickMovement();
-
-		/* Must throw away unused bytes from the host, or it will lock up while waiting for the device */
-		CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
-
-		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
-		MS_Device_USBTask(&Disk_MS_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	Joystick_Init();
-	Dataflash_Init();
-	USB_Init();
-
-	/* Check if the Dataflash is working, abort if not */
-	if (!(DataflashManager_CheckDataflashOperation()))
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		for(;;);
-	}
-
-	/* Clear Dataflash sector protections, if enabled */
-	DataflashManager_ResetDataflashProtections();
-}
-
-/** Checks for changes in the position of the board joystick, sending strings to the host upon each change. */
-void CheckJoystickMovement(void)
-{
-	uint8_t     JoyStatus_LCL = Joystick_GetStatus();
-	char*       ReportString  = NULL;
-	static bool ActionSent    = false;
-
-	if (JoyStatus_LCL & JOY_UP)
-	  ReportString = "Joystick Up\r\n";
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  ReportString = "Joystick Down\r\n";
-	else if (JoyStatus_LCL & JOY_LEFT)
-	  ReportString = "Joystick Left\r\n";
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  ReportString = "Joystick Right\r\n";
-	else if (JoyStatus_LCL & JOY_PRESS)
-	  ReportString = "Joystick Pressed\r\n";
-	else
-	  ActionSent = false;
-
-	if ((ReportString != NULL) && (ActionSent == false))
-	{
-		ActionSent = true;
-
-		/* Write the string to the virtual COM port via the created character stream */
-		fputs(ReportString, &USBSerialStream);
-
-		/* Alternatively, without the stream: */
-		// CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString);
-	}
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
-	ConfigSuccess &= MS_Device_ConfigureEndpoints(&Disk_MS_Interface);
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
-	MS_Device_ProcessControlRequest(&Disk_MS_Interface);
-}
-
-/** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface configuration structure being referenced
- */
-bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	bool CommandSuccess;
-
-	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-	CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo);
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-
-	return CommandSuccess;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h
deleted file mode 100644
index d60e8aa5a4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for VirtualSerial.c.
- */
-
-#ifndef _VIRTUALSERIAL_H_
-#define _VIRTUALSERIAL_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include "Lib/SCSI.h"
-		#include "Lib/DataflashManager.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY          LEDS_LED2
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void CheckJoystickMovement(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt
deleted file mode 100644
index caf83e499d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Communications Device Class (Virtual Serial Port) and Mass Storage Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC) \n
- *        Mass Storage Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM) \n
- *        Bulk-Only Transport</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard \n
- *        USBIF Mass Storage Standard \n
- *        USB Bulk-Only Transport Standard \n
- *        SCSI Primary Commands Specification \n
- *        SCSI Block Commands Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Combined Communications Device Class/Mass Storage demonstration application.
- *  This gives a simple reference application for implementing a combined
- *  CDC and Mass Storage device acting as a both a virtual serial port and a flash
- *  drive. Joystick actions are transmitted to the host as strings, and data can be
- *  written to or read from the exposed flash drive interface in the same manner as
- *  other USB flash drives. The device does not respond to serial data sent from the
- *  host.
- *
- *  After running this demo for the first time on a new computer,
- *  you will need to supply the .INF file located in this demo
- *  project's directory as the device's driver when running under
- *  Windows. This will enable Windows to use its inbuilt CDC drivers,
- *  negating the need for custom drivers for the device. Other
- *  Operating Systems should automatically use their own inbuilt
- *  CDC-ACM drivers.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>TOTAL_LUNS</td>
- *    <td>AppConfig.h</td>
- *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
- *        this can be set to any positive non-zero amount.</td>
- *   </tr>
- *   <tr>
- *    <td>DISK_READ_ONLY</td>
- *    <td>AppConfig.h</td>
- *    <td>Configuration define, indicating if the disk should be write protected or not.</td>
- *   </tr>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/asf.xml
deleted file mode 100644
index a73bcc21c6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/asf.xml
+++ /dev/null
@@ -1,70 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_ms.example.avr8">

-		<require idref="lufa.demos.device.class.cdc_ms"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_ms.example.xmega">

-		<require idref="lufa.demos.device.class.cdc_ms"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.cdc_ms" caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Virtual Serial and Mass Storage device demo, implementing a virtual serial channel between the host PC and the device, and a basic USB storage disk using a Dataflash memory IC. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="CDC Class"/>

-			<keyword value="Mass Storage Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="VirtualSerialMassStorage.txt"/>

-		<build type="distribute" subtype="user-file" value="LUFA VirtualSerialMassStorage.inf"/>

-

-		<build type="c-source" value="VirtualSerialMassStorage.c"/>

-		<build type="c-source" value="Lib/DataflashManager.c"/>

-		<build type="c-source" value="Lib/SCSI.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="VirtualSerialMassStorage.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="header-file" value="Lib/DataflashManager.h"/>

-		<build type="header-file" value="Lib/SCSI.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.joystick"/>

-		<require idref="lufa.drivers.board.dataflash"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/doxyfile
deleted file mode 100644
index c57c1fcaec..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Virtual Serial/Mass Storage Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile
deleted file mode 100644
index 1329aeba99..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = VirtualSerialMassStorage
-SRC          = $(TARGET).c Descriptors.c Lib/DataflashManager.c Lib/SCSI.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/Config/LUFAConfig.h
deleted file mode 100644
index 3c3b68bb1a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               4
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c
deleted file mode 100644
index 029c80f0b8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
-{
-	/* Use the HID class driver's standard Mouse report.
-	 *   Min X/Y Axis values: -1
-	 *   Max X/Y Axis values:  1
-	 *   Min physical X/Y Axis values (used to determine resolution): -1
-	 *   Max physical X/Y Axis values (used to determine resolution):  1
-	 *   Buttons: 3
-	 *   Absolute screen coordinates: false
-	 */
-	HID_DESCRIPTOR_MOUSE(-1, 1, -1, 1, 3, false)
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_IADDeviceClass,
-	.SubClass               = USB_CSCP_IADDeviceSubclass,
-	.Protocol               = USB_CSCP_IADDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2062,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 3,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.CDC_IAD =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
-
-			.FirstInterfaceIndex    = INTERFACE_ID_CDC_CCI,
-			.TotalInterfaces        = 2,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.IADStrIndex            = NO_DESCRIPTOR
-		},
-
-	.CDC_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x06,
-		},
-
-	.CDC_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
-		},
-
-	.CDC_NotificationEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.HID_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Mouse,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_BootSubclass,
-			.Protocol               = HID_CSCP_MouseBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_MouseHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(MouseReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MOUSE_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MOUSE_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA CDC and Mouse Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_MouseHID;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case HID_DTYPE_Report:
-			Address = &MouseReport;
-			Size    = sizeof(MouseReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h
deleted file mode 100644
index ab64f42ddc..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Macros: */
-		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 2)
-
-		/** Endpoint address of the CDC device-to-host data IN endpoint. */
-		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
-		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPSIZE        8
-
-		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                16
-
-		/** Endpoint address of the Mouse HID reporting IN endpoint. */
-		#define MOUSE_EPADDR                   (ENDPOINT_DIR_IN  | 1)
-
-		/** Size in bytes of the Mouse HID reporting IN endpoint. */
-		#define MOUSE_EPSIZE                   8
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t    Config;
-
-			// CDC Control Interface
-			USB_Descriptor_Interface_Association_t   CDC_IAD;
-			USB_Descriptor_Interface_t               CDC_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
-			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
-
-			// CDC Data Interface
-			USB_Descriptor_Interface_t               CDC_DCI_Interface;
-			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
-
-			// Mouse HID Interface
-			USB_Descriptor_Interface_t               HID_Interface;
-			USB_HID_Descriptor_HID_t                 HID_MouseHID;
-	        USB_Descriptor_Endpoint_t                HID_ReportINEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
-			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
-			INTERFACE_ID_Mouse   = 2, /**< Mouse interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/LUFA VirtualSerialMouse.inf b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/LUFA VirtualSerialMouse.inf
deleted file mode 100644
index ac47e066b5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/LUFA VirtualSerialMouse.inf
+++ /dev/null
@@ -1,66 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-;************************************************************
-
-[DefaultInstall]
-CopyINF="LUFA VirtualSerialMouse.inf"
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-DriverVer=7/1/2012,10.0.0.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
-
-[SourceDisksNames]
-
-[SourceDisksFiles]
-
-[DestinationDirs]
-DefaultDestDir=12
-
-[DriverInstall]
-Include=mdmcpq.inf
-CopyFiles=FakeModemCopyFileSection
-AddReg=DriverInstall.AddReg
-
-[DriverInstall.Services]
-Include=mdmcpq.inf
-AddService=usbser, 0x00000002, LowerFilter_Service_Inst
-
-[DriverInstall.AddReg]
-HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2062&MI_00
-
-[DeviceList.NTx86]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2062&MI_00
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2062&MI_00
-
-[DeviceList.NTia64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2062&MI_00
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGNAME="http://www.lufa-lib.org"
-DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c
deleted file mode 100644
index 02eb4875d8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the VirtualSerialMouse demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "VirtualSerialMouse.h"
-
-/** LUFA CDC Class driver interface configuration and state information. This structure is
- *  passed to all CDC Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
-	{
-		.Config =
-			{
-				.ControlInterfaceNumber         = INTERFACE_ID_CDC_CCI,
-				.DataINEndpoint                 =
-					{
-						.Address                = CDC_TX_EPADDR,
-						.Size                   = CDC_TXRX_EPSIZE,
-						.Banks                  = 1,
-					},
-				.DataOUTEndpoint                =
-					{
-						.Address                = CDC_RX_EPADDR,
-						.Size                   = CDC_TXRX_EPSIZE,
-						.Banks                  = 1,
-					},
-				.NotificationEndpoint           =
-					{
-						.Address                = CDC_NOTIFICATION_EPADDR,
-						.Size                   = CDC_NOTIFICATION_EPSIZE,
-						.Banks                  = 1,
-					},
-			},
-	};
-
-/** Buffer to hold the previously generated Mouse HID report, for comparison purposes inside the HID class driver. */
-static uint8_t PrevMouseHIDReportBuffer[sizeof(USB_MouseReport_Data_t)];
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Device_t Mouse_HID_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber                = INTERFACE_ID_Mouse,
-				.ReportINEndpoint               =
-					{
-						.Address                = MOUSE_EPADDR,
-						.Size                   = MOUSE_EPSIZE,
-						.Banks                  = 1,
-					},
-				.PrevReportINBuffer             = PrevMouseHIDReportBuffer,
-				.PrevReportINBufferSize         = sizeof(PrevMouseHIDReportBuffer),
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		CheckJoystickMovement();
-
-		/* Must throw away unused bytes from the host, or it will lock up while waiting for the device */
-		CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
-
-		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
-		HID_Device_USBTask(&Mouse_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Checks for changes in the position of the board joystick, sending strings to the host upon each change. */
-void CheckJoystickMovement(void)
-{
-	uint8_t     JoyStatus_LCL = Joystick_GetStatus();
-	char*       ReportString  = NULL;
-	static bool ActionSent    = false;
-
-	if (JoyStatus_LCL & JOY_UP)
-	  ReportString = "Joystick Up\r\n";
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  ReportString = "Joystick Down\r\n";
-	else if (JoyStatus_LCL & JOY_LEFT)
-	  ReportString = "Joystick Left\r\n";
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  ReportString = "Joystick Right\r\n";
-	else if (JoyStatus_LCL & JOY_PRESS)
-	  ReportString = "Joystick Pressed\r\n";
-	else
-	  ActionSent = false;
-
-	if ((ReportString != NULL) && (ActionSent == false))
-	{
-		ActionSent = true;
-
-		CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString);
-	}
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Mouse_HID_Interface);
-	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
-
-	USB_Device_EnableSOFEvents();
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
-	HID_Device_ProcessControlRequest(&Mouse_HID_Interface);
-}
-
-/** Event handler for the USB device Start Of Frame event. */
-void EVENT_USB_Device_StartOfFrame(void)
-{
-	HID_Device_MillisecondElapsed(&Mouse_HID_Interface);
-}
-
-/** HID class driver callback function for the creation of HID reports to the host.
- *
- *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
- *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
- *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
- *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
- *
- *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
- */
-bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                         uint8_t* const ReportID,
-                                         const uint8_t ReportType,
-                                         void* ReportData,
-                                         uint16_t* const ReportSize)
-{
-	USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData;
-
-	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
-	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
-
-	if (JoyStatus_LCL & JOY_UP)
-	  MouseReport->Y = -1;
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  MouseReport->Y =  1;
-
-	if (JoyStatus_LCL & JOY_LEFT)
-	  MouseReport->X = -1;
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  MouseReport->X =  1;
-
-	if (JoyStatus_LCL & JOY_PRESS)
-	  MouseReport->Button |= (1 << 0);
-
-	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
-	  MouseReport->Button |= (1 << 1);
-
-	*ReportSize = sizeof(USB_MouseReport_Data_t);
-	return true;
-}
-
-/** HID class driver callback function for the processing of HID reports from the host.
- *
- *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in] ReportID    Report ID of the received report from the host
- *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
- *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
- *  \param[in] ReportSize  Size in bytes of the received HID report
- */
-void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                          const uint8_t ReportID,
-                                          const uint8_t ReportType,
-                                          const void* ReportData,
-                                          const uint16_t ReportSize)
-{
-	// Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h
deleted file mode 100644
index c1b9cea0db..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for VirtualSerialMouse.c.
- */
-
-#ifndef _VIRTUALSERIAL_MOUSE_H_
-#define _VIRTUALSERIAL_MOUSE_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void CheckJoystickMovement(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                         uint8_t* const ReportID,
-		                                         const uint8_t ReportType,
-		                                         void* ReportData,
-		                                         uint16_t* const ReportSize);
-		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                          const uint8_t ReportID,
-		                                          const uint8_t ReportType,
-		                                          const void* ReportData,
-		                                          const uint16_t ReportSize);
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt
deleted file mode 100644
index b8b32ed735..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Combined Communications Device Class (Virtual Serial Port) and Mouse Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC) \n
- *        Human Interface Device Class (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM) \n
- *        Mouse Subclass</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard</td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Combined Communications Device Class/Mouse demonstration application.
- *  This gives a simple reference application for implementing a combined
- *  CDC and HID device acting as a both a virtual serial port and a mouse.
- *  Joystick actions are transmitted to the host as strings and as mouse
- *  movements. The device does not respond to serial data sent from the host.
- *
- *  After running this demo for the first time on a new computer,
- *  you will need to supply the .INF file located in this demo
- *  project's directory as the device's driver when running under
- *  Windows. This will enable Windows to use its inbuilt CDC drivers,
- *  negating the need for custom drivers for the device. Other
- *  Operating Systems should automatically use their own inbuilt
- *  CDC-ACM drivers.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/asf.xml
deleted file mode 100644
index 40d13050b8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/asf.xml
+++ /dev/null
@@ -1,64 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_mouse.example.avr8">

-		<require idref="lufa.demos.device.class.cdc_mouse"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_mouse.example.xmega">

-		<require idref="lufa.demos.device.class.cdc_mouse"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.class.cdc_mouse" caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Virtual Serial and Mouse device demo, implementing a virtual serial channel between the host PC and the device, and a USB mouse. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="CDC Class"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="VirtualSerialMouse.txt"/>

-		<build type="distribute" subtype="user-file" value="LUFA VirtualSerialMouse.inf"/>

-

-		<build type="c-source" value="VirtualSerialMouse.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="VirtualSerialMouse.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-		<require idref="lufa.drivers.board.joystick"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/doxyfile
deleted file mode 100644
index 7621a8789c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Combined Virtual Serial and Mouse Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
deleted file mode 100644
index 6e861dcf61..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = VirtualSerialMouse
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/makefile
deleted file mode 100644
index 1450df5e20..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/ClassDriver/makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-
-# Makefile to build all the LUFA Device Demos. Call with "make all" to
-# rebuild all Device demos.
-
-# Projects are pre-cleaned before each one is built, to ensure any
-# custom LUFA library build options are reflected in the compiled
-# code.
-
-PROJECT_DIRECTORIES := $(shell ls -d */)
-
-# This makefile is potentially infinitely recursive if something really bad
-# happens when determining the set of project directories - hard-abort if
-# more than 10 levels deep to avoid angry emails.
-ifeq ($(MAKELEVEL), 10)
-   $(error EMERGENCY ABORT: INFINITE RECURSION DETECTED)
-endif
-
-# Need to special-case building without a per-project object directory
-ifeq ($(OBJDIR),)
-   # If no target specified, force "clean all" and disallow parallel build
-   ifeq ($(MAKECMDGOALS),)
-      MAKECMDGOALS := clean all
-      .NOTPARALLEL:
-   endif
-
-   # If one of the targets is to build, force "clean" beforehand and disallow parallel build
-   ifneq ($(findstring all, $(MAKECMDGOALS)),)
-      MAKECMDGOALS := clean $(MAKECMDGOALS)
-      .NOTPARALLEL:
-   endif
-endif
-
-%: $(PROJECT_DIRECTORIES)
-	@echo . > /dev/null
-
-$(PROJECT_DIRECTORIES):
-	@$(MAKE) -C $@ $(MAKECMDGOALS)
-
-.PHONY: $(PROJECT_DIRECTORIES)
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h
deleted file mode 100644
index 3c3b68bb1a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               4
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c
deleted file mode 100644
index bfb0ee5f31..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Peter Lawrence (majbthrd [at] gmail [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = 0x00,
-	.SubClass               = 0x00,
-	.Protocol               = 0x00,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2065,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.TM_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_TestAndMeasurement,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 3,
-
-			.Class                  = 0xFE,
-			.SubClass               = 0x03,
-			.Protocol               = 0x01,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.TM_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = TMC_OUT_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = TMC_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.TM_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = TMC_IN_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = TMC_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.TM_NotificationEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = TMC_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = TMC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA TMC Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h
deleted file mode 100644
index c1e6688557..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Peter Lawrence (majbthrd [at] gmail [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Macros: */
-		/** Endpoint address of the TMC notification IN endpoint. */
-		#define TMC_NOTIFICATION_EPADDR  (ENDPOINT_DIR_IN  | 2)
-
-		/** Endpoint address of the TMC device-to-host data IN endpoint. */
-		#define TMC_IN_EPADDR            (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the TMC host-to-device data OUT endpoint. */
-		#define TMC_OUT_EPADDR           (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the TMC data endpoints. */
-		#define TMC_IO_EPSIZE            64
-
-		/** Size in bytes of the TMC notification endpoint. */
-		#define TMC_NOTIFICATION_EPSIZE  8
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Test and Measurement Interface
-			USB_Descriptor_Interface_t            TM_Interface;
-			USB_Descriptor_Endpoint_t             TM_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t             TM_DataInEndpoint;
-			USB_Descriptor_Endpoint_t             TM_NotificationEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_TestAndMeasurement = 0, /**< Test and measurement interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
deleted file mode 100644
index b0e52308c2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
+++ /dev/null
@@ -1,476 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-#include "TestAndMeasurement.h"
-
-/** Contains the (usually static) capabilities of the TMC device. This table is requested by the
- *  host upon enumeration to give it information on what features of the Test and Measurement USB
- *  Class the device supports.
- */
-TMC_Capabilities_t Capabilities =
-	{
-		.Status     = TMC_STATUS_SUCCESS,
-		.TMCVersion = VERSION_BCD(1.00),
-
-		.Interface  =
-			{
-				.ListenOnly             = false,
-				.TalkOnly               = false,
-				.PulseIndicateSupported = false,
-			},
-
-		.Device     =
-			{
-				.SupportsAbortINOnMatch = false,
-			},
-	};
-
-/** Current TMC control request that is being processed */
-static uint8_t RequestInProgress = 0;
-
-/** Stream callback abort flag for bulk IN data */
-static bool IsTMCBulkINReset = false;
-
-/** Stream callback abort flag for bulk OUT data */
-static bool IsTMCBulkOUTReset = false;
-
-/** Last used tag value for data transfers */
-static uint8_t CurrentTransferTag = 0;
-
-/** Length of last data transfer, for reporting to the host in case an in-progress transfer is aborted */
-static uint16_t LastTransferLength = 0;
-
-/** Buffer to hold the next message to sent to the TMC host */
-static uint8_t NextResponseBuffer[64];
-
-/** Indicates the length of the next response to send */
-static uint8_t NextResponseLen;
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		TMC_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs and stops the USB management and CDC management tasks.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
- *  of the USB device after enumeration - the device endpoints are configured and the CDC management task started.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup TMC In, Out and Notification Endpoints */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, TMC_IO_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_IN_EPADDR,  EP_TYPE_BULK, TMC_IO_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_OUT_EPADDR, EP_TYPE_BULK, TMC_IO_EPSIZE, 1);
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- *  the device from the USB host before passing along unhandled control requests to the library for processing
- *  internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	uint8_t TMCRequestStatus = TMC_STATUS_SUCCESS;
-
-	/* Process TMC specific control requests */
-	switch (USB_ControlRequest.bRequest)
-	{
-		case Req_InitiateAbortBulkOut:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
-			{
-				/* Check that no split transaction is already in progress and the data transfer tag is valid */
-				if (RequestInProgress != 0)
-				{
-					TMCRequestStatus = TMC_STATUS_SPLIT_IN_PROGRESS;
-				}
-				else if (USB_ControlRequest.wValue != CurrentTransferTag)
-				{
-					TMCRequestStatus = TMC_STATUS_TRANSFER_NOT_IN_PROGRESS;
-				}
-				else
-				{
-					/* Indicate that all in-progress/pending data OUT requests should be aborted */
-					IsTMCBulkOUTReset = true;
-
-					/* Save the split request for later checking when a new request is received */
-					RequestInProgress = Req_InitiateAbortBulkOut;
-				}
-
-				Endpoint_ClearSETUP();
-
-				/* Write the request response byte */
-				Endpoint_Write_8(TMCRequestStatus);
-
-				Endpoint_ClearIN();
-				Endpoint_ClearStatusStage();
-			}
-
-			break;
-		case Req_CheckAbortBulkOutStatus:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
-			{
-				/* Check that an ABORT BULK OUT transaction has been requested and that the request has completed */
-				if (RequestInProgress != Req_InitiateAbortBulkOut)
-				  TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS;
-				else if (IsTMCBulkOUTReset)
-				  TMCRequestStatus = TMC_STATUS_PENDING;
-				else
-				  RequestInProgress = 0;
-
-				Endpoint_ClearSETUP();
-
-				/* Write the request response bytes */
-				Endpoint_Write_8(TMCRequestStatus);
-				Endpoint_Write_16_LE(0);
-				Endpoint_Write_32_LE(LastTransferLength);
-
-				Endpoint_ClearIN();
-				Endpoint_ClearStatusStage();
-			}
-
-			break;
-		case Req_InitiateAbortBulkIn:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
-			{
-				/* Check that no split transaction is already in progress and the data transfer tag is valid */
-				if (RequestInProgress != 0)
-				{
-					TMCRequestStatus = TMC_STATUS_SPLIT_IN_PROGRESS;
-				}
-				else if (USB_ControlRequest.wValue != CurrentTransferTag)
-				{
-					TMCRequestStatus = TMC_STATUS_TRANSFER_NOT_IN_PROGRESS;
-				}
-				else
-				{
-					/* Indicate that all in-progress/pending data IN requests should be aborted */
-					IsTMCBulkINReset = true;
-
-					/* Save the split request for later checking when a new request is received */
-					RequestInProgress = Req_InitiateAbortBulkIn;
-				}
-
-				Endpoint_ClearSETUP();
-
-				/* Write the request response bytes */
-				Endpoint_Write_8(TMCRequestStatus);
-				Endpoint_Write_8(CurrentTransferTag);
-
-				Endpoint_ClearIN();
-				Endpoint_ClearStatusStage();
-			}
-
-			break;
-		case Req_CheckAbortBulkInStatus:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
-			{
-				/* Check that an ABORT BULK IN transaction has been requested and that the request has completed */
-				if (RequestInProgress != Req_InitiateAbortBulkIn)
-				  TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS;
-				else if (IsTMCBulkINReset)
-				  TMCRequestStatus = TMC_STATUS_PENDING;
-				else
-				  RequestInProgress = 0;
-
-				Endpoint_ClearSETUP();
-
-				/* Write the request response bytes */
-				Endpoint_Write_8(TMCRequestStatus);
-				Endpoint_Write_16_LE(0);
-				Endpoint_Write_32_LE(LastTransferLength);
-
-				Endpoint_ClearIN();
-				Endpoint_ClearStatusStage();
-			}
-
-			break;
-		case Req_InitiateClear:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				/* Check that no split transaction is already in progress */
-				if (RequestInProgress != 0)
-				{
-					Endpoint_Write_8(TMC_STATUS_SPLIT_IN_PROGRESS);
-				}
-				else
-				{
-					/* Indicate that all in-progress/pending data IN and OUT requests should be aborted */
-					IsTMCBulkINReset  = true;
-					IsTMCBulkOUTReset = true;
-
-					/* Save the split request for later checking when a new request is received */
-					RequestInProgress = Req_InitiateClear;
-				}
-
-				Endpoint_ClearSETUP();
-
-				/* Write the request response byte */
-				Endpoint_Write_8(TMCRequestStatus);
-
-				Endpoint_ClearIN();
-				Endpoint_ClearStatusStage();
-			}
-
-			break;
-		case Req_CheckClearStatus:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				/* Check that a CLEAR transaction has been requested and that the request has completed */
-				if (RequestInProgress != Req_InitiateClear)
-				  TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS;
-				else if (IsTMCBulkINReset || IsTMCBulkOUTReset)
-				  TMCRequestStatus = TMC_STATUS_PENDING;
-				else
-				  RequestInProgress = 0;
-
-				Endpoint_ClearSETUP();
-
-				/* Write the request response bytes */
-				Endpoint_Write_8(TMCRequestStatus);
-				Endpoint_Write_8(0);
-
-				Endpoint_ClearIN();
-				Endpoint_ClearStatusStage();
-			}
-
-			break;
-		case Req_GetCapabilities:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-
-				/* Write the device capabilities to the control endpoint */
-				Endpoint_Write_Control_Stream_LE(&Capabilities, sizeof(TMC_Capabilities_t));
-				Endpoint_ClearOUT();
-			}
-
-			break;
-	}
-}
-
-void ProcessSentMessage(uint8_t* const Data, const uint8_t Length)
-{
-	if (strncmp((char*)Data, "*IDN?", 5) == 0)
-	  strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO");
-
-	NextResponseLen = strlen((char*)NextResponseBuffer);
-}
-
-uint8_t GetNextMessage(uint8_t* const Data)
-{
-	  strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO");
-
-	NextResponseLen = strlen((char*)NextResponseBuffer);
-// ---
-	uint8_t DataLen = MIN(NextResponseLen, 64);
-
-	strlcpy((char*)Data, (char*)NextResponseBuffer, DataLen);
-
-	return DataLen;
-}
-
-/** Function to manage TMC data transmission and reception to and from the host. */
-void TMC_Task(void)
-{
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	TMC_MessageHeader_t MessageHeader;
-	uint8_t             MessagePayload[128];
-
-	/* Try to read in a TMC message from the interface, process if one is available */
-	if (ReadTMCHeader(&MessageHeader))
-	{
-		/* Indicate busy */
-		LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-		switch (MessageHeader.MessageID)
-		{
-			case TMC_MESSAGEID_DEV_DEP_MSG_OUT:
-				LastTransferLength = 0;
-				while (Endpoint_Read_Stream_LE(MessagePayload, MIN(MessageHeader.TransferSize, sizeof(MessagePayload)), &LastTransferLength) ==
-				       ENDPOINT_RWSTREAM_IncompleteTransfer)
-				{
-					if (IsTMCBulkOUTReset)
-					  break;
-				}
-
-				Endpoint_ClearOUT();
-
-				ProcessSentMessage(MessagePayload, LastTransferLength);
-				break;
-			case TMC_MESSAGEID_DEV_DEP_MSG_IN:
-				Endpoint_ClearOUT();
-
-				MessageHeader.TransferSize = GetNextMessage(MessagePayload);
-				MessageHeader.MessageIDSpecific.DeviceOUT.LastMessageTransaction = true;
-				WriteTMCHeader(&MessageHeader);
-
-				LastTransferLength = 0;
-				while (Endpoint_Write_Stream_LE(MessagePayload, MessageHeader.TransferSize, &LastTransferLength) ==
-				       ENDPOINT_RWSTREAM_IncompleteTransfer)
-				{
-					if (IsTMCBulkINReset)
-					  break;
-				}
-
-				Endpoint_ClearIN();
-				break;
-			default:
-				Endpoint_StallTransaction();
-				break;
-		}
-
-		LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	}
-
-	/* All pending data has been processed - reset the data abort flags */
-	IsTMCBulkINReset  = false;
-	IsTMCBulkOUTReset = false;
-}
-
-/** Attempts to read in the TMC message header from the TMC interface.
- *
- *  \param[out] MessageHeader  Pointer to a location where the read header (if any) should be stored
- *
- *  \return Boolean \c true if a header was read, \c false otherwise
- */
-bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader)
-{
-	uint16_t BytesTransferred;
-	uint8_t  ErrorCode;
-
-	/* Select the Data Out endpoint */
-	Endpoint_SelectEndpoint(TMC_OUT_EPADDR);
-
-	/* Abort if no command has been sent from the host */
-	if (!(Endpoint_IsOUTReceived()))
-	  return false;
-
-	/* Read in the header of the command from the host */
-	BytesTransferred = 0;
-	while ((ErrorCode = Endpoint_Read_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), &BytesTransferred)) ==
-	       ENDPOINT_RWSTREAM_IncompleteTransfer)
-	{
-		if (IsTMCBulkOUTReset)
-		  break;
-	}
-
-	/* Store the new command tag value for later use */
-	CurrentTransferTag = MessageHeader->Tag;
-
-	/* Indicate if the command has been aborted or not */
-	return (!(IsTMCBulkOUTReset) && (ErrorCode == ENDPOINT_RWSTREAM_NoError));
-}
-
-bool WriteTMCHeader(TMC_MessageHeader_t* const MessageHeader)
-{
-	uint16_t BytesTransferred;
-	uint8_t  ErrorCode;
-
-	/* Set the message tag of the command header */
-	MessageHeader->Tag        =  CurrentTransferTag;
-	MessageHeader->InverseTag = ~CurrentTransferTag;
-
-	/* Select the Data In endpoint */
-	Endpoint_SelectEndpoint(TMC_IN_EPADDR);
-
-	/* Send the command header to the host */
-	BytesTransferred = 0;
-	while ((ErrorCode = Endpoint_Write_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), &BytesTransferred)) ==
-	       ENDPOINT_RWSTREAM_IncompleteTransfer)
-	{
-		if (IsTMCBulkINReset)
-		  break;
-	}
-
-	/* Indicate if the command has been aborted or not */
-	return (!(IsTMCBulkINReset) && (ErrorCode == ENDPOINT_RWSTREAM_NoError));
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h
deleted file mode 100644
index ef050bd61a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-#ifndef _TESTANDMEASUREMENT_H_
-#define _TESTANDMEASUREMENT_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY                  LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING              (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY                    (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR                    (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY                      LEDS_LED2
-
-		#define Req_InitiateAbortBulkOut              0x01
-		#define Req_CheckAbortBulkOutStatus           0x02
-		#define Req_InitiateAbortBulkIn               0x03
-		#define Req_CheckAbortBulkInStatus            0x04
-		#define Req_InitiateClear                     0x05
-		#define Req_CheckClearStatus                  0x06
-		#define Req_GetCapabilities                   0x07
-		#define Req_IndicatorPulse                    0x40
-
-		#define TMC_STATUS_SUCCESS                    0x01
-		#define TMC_STATUS_PENDING                    0x02
-		#define TMC_STATUS_FAILED                     0x80
-		#define TMC_STATUS_TRANSFER_NOT_IN_PROGRESS   0x81
-		#define TMC_STATUS_SPLIT_NOT_IN_PROGRESS      0x82
-		#define TMC_STATUS_SPLIT_IN_PROGRESS          0x83
-
-		#define TMC_MESSAGEID_DEV_DEP_MSG_OUT         0x01
-		#define TMC_MESSAGEID_DEV_DEP_MSG_IN          0x02
-		#define TMC_MESSAGEID_DEV_VENDOR_OUT          0x7E
-		#define TMC_MESSAGEID_DEV_VENDOR_IN           0x7F
-
-	/* Type Defines */
-		typedef struct
-		{
-			uint8_t  Status;
-			uint8_t  Reserved;
-
-			uint16_t TMCVersion;
-
-			struct
-			{
-				unsigned ListenOnly             : 1;
-				unsigned TalkOnly               : 1;
-				unsigned PulseIndicateSupported : 1;
-				unsigned Reserved               : 5;
-			} Interface;
-
-			struct
-			{
-				unsigned SupportsAbortINOnMatch : 1;
-				unsigned Reserved               : 7;
-			} Device;
-
-			uint8_t Reserved2[6];
-			uint8_t Reserved3[12];
-		} TMC_Capabilities_t;
-
-		typedef struct
-		{
-			uint8_t LastMessageTransaction;
-			uint8_t TermChar;
-			uint8_t Reserved[2];
-		} TMC_DevOUTMessageHeader_t;
-
-		typedef struct
-		{
-			uint8_t LastMessageTransaction;
-			uint8_t Reserved[3];
-		} TMC_DevINMessageHeader_t;
-
-		typedef struct
-		{
-			uint8_t  MessageID;
-			uint8_t  Tag;
-			uint8_t  InverseTag;
-			uint8_t  Reserved;
-			uint32_t TransferSize;
-
-			union
-			{
-				TMC_DevOUTMessageHeader_t DeviceOUT;
-				TMC_DevINMessageHeader_t  DeviceIN;
-				uint32_t                  VendorSpecific;
-			} MessageIDSpecific;
-		} TMC_MessageHeader_t;
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void TMC_Task(void);
-		bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader);
-		bool WriteTMCHeader(TMC_MessageHeader_t* const MessageHeader);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/makefile
deleted file mode 100644
index c7dda069d5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/Incomplete/TestAndMeasurement/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = TestAndMeasurement
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/AudioInput.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/AudioInput.c
deleted file mode 100644
index 2937d8f861..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/AudioInput.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the Audio Input demo. This file contains the main tasks of the demo and
- *  is responsible for the initial application hardware configuration.
- */
-
-#include "AudioInput.h"
-
-/** Flag to indicate if the streaming audio alternative interface has been selected by the host. */
-static bool StreamingAudioInterfaceSelected = false;
-
-/** Current audio sampling frequency of the streaming audio endpoint. */
-static uint32_t CurrentAudioSampleFrequency = 48000;
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	Buttons_Init();
-	ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
-	ADC_SetupChannel(MIC_IN_ADC_CHANNEL);
-	USB_Init();
-
-	/* Start the ADC conversion in free running mode */
-	ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs, and
- *  configures the sample update and PWM timers.
- */
-void EVENT_USB_Device_Connect(void)
-{
-	/* Indicate USB enumerating */
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	/* Sample reload timer initialization */
-	TIMSK0  = (1 << OCIE0A);
-	OCR0A   = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
-	TCCR0A  = (1 << WGM01);  // CTC mode
-	TCCR0B  = (1 << CS01);   // Fcpu/8 speed
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs, disables the sample update and PWM output timers and stops the USB and Audio management tasks.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Stop the sample reload timer */
-	TCCR0B = 0;
-
-	/* Indicate streaming audio interface not selected */
-	StreamingAudioInterfaceSelected = false;
-
-	/* Indicate USB not ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
- *  of the USB device after enumeration - the device endpoints are configured.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup Audio Stream Endpoint */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPADDR, EP_TYPE_ISOCHRONOUS, AUDIO_STREAM_EPSIZE, 2);
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- *  the device from the USB host before passing along unhandled control requests to the library for processing
- *  internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	/* Process General and Audio specific control requests */
-	switch (USB_ControlRequest.bRequest)
-	{
-		case REQ_SetInterface:
-			/* Set Interface is not handled by the library, as its function is application-specific */
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-				Endpoint_ClearStatusStage();
-
-				/* Check if the host is enabling the audio interface (setting AlternateSetting to 1) */
-				StreamingAudioInterfaceSelected = ((USB_ControlRequest.wValue) != 0);
-			}
-
-			break;
-		case AUDIO_REQ_GetStatus:
-			/* Get Status request can be directed at either the interface or endpoint, neither is currently used
-			 * according to the latest USB Audio 1.0 standard, but must be ACKed with no data when requested */
-			if ((USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) ||
-			    (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT)))
-			{
-				Endpoint_ClearSETUP();
-				Endpoint_ClearStatusStage();
-			}
-
-			break;
-		case AUDIO_REQ_SetCurrent:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT))
-			{
-				/* Extract out the relevant request information to get the target Endpoint address and control being set */
-				uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex;
-				uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
-
-				/* Only handle SET CURRENT requests to the audio endpoint's sample frequency property */
-				if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
-				{
-					uint8_t SampleRate[3];
-
-					Endpoint_ClearSETUP();
-					Endpoint_Read_Control_Stream_LE(SampleRate, sizeof(SampleRate));
-					Endpoint_ClearIN();
-
-					/* Set the new sampling frequency to the value given by the host */
-					CurrentAudioSampleFrequency = (((uint32_t)SampleRate[2] << 16) | ((uint32_t)SampleRate[1] << 8) | (uint32_t)SampleRate[0]);
-
-					/* Adjust sample reload timer to the new frequency */
-					OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
-				}
-			}
-
-			break;
-		case AUDIO_REQ_GetCurrent:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
-			{
-				/* Extract out the relevant request information to get the target Endpoint address and control being retrieved */
-				uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex;
-				uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
-
-				/* Only handle GET CURRENT requests to the audio endpoint's sample frequency property */
-				if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
-				{
-					uint8_t SampleRate[3];
-
-					/* Convert the sampling rate value into the 24-bit format the host expects for the property */
-					SampleRate[2] = (CurrentAudioSampleFrequency >> 16);
-					SampleRate[1] = (CurrentAudioSampleFrequency >> 8);
-					SampleRate[0] = (CurrentAudioSampleFrequency &  0xFF);
-
-					Endpoint_ClearSETUP();
-					Endpoint_Write_Control_Stream_LE(SampleRate, sizeof(SampleRate));
-					Endpoint_ClearOUT();
-				}
-			}
-
-			break;
-	}
-}
-
-/** ISR to handle the reloading of the data endpoint with the next sample. */
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)
-{
-	uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
-
-	/* Select the audio stream endpoint */
-	Endpoint_SelectEndpoint(AUDIO_STREAM_EPADDR);
-
-	/* Check if the current endpoint can be written to and that the audio interface is enabled */
-	if (Endpoint_IsINReady() && StreamingAudioInterfaceSelected)
-	{
-		int16_t AudioSample;
-
-		#if defined(USE_TEST_TONE)
-			static uint8_t SquareWaveSampleCount;
-			static int16_t CurrentWaveValue;
-
-			/* In test tone mode, generate a square wave at 1/256 of the sample rate */
-			if (SquareWaveSampleCount++ == 0xFF)
-			  CurrentWaveValue ^= 0x8000;
-
-			/* Only generate audio if the board button is being pressed */
-			AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;
-		#else
-			/* Audio sample is ADC value scaled to fit the entire range */
-			AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());
-
-			#if defined(MICROPHONE_BIASED_TO_HALF_RAIL)
-			/* Microphone is biased to half rail voltage, subtract the bias from the sample value */
-			AudioSample -= (SAMPLE_MAX_RANGE / 2);
-			#endif
-		#endif
-
-		/* Write the sample to the buffer */
-		Endpoint_Write_16_LE(AudioSample);
-
-		/* Check to see if the bank is now full */
-		if (!(Endpoint_IsReadWriteAllowed()))
-		{
-			/* Send the full packet to the host */
-			Endpoint_ClearIN();
-		}
-	}
-
-	Endpoint_SelectEndpoint(PrevEndpoint);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/AudioInput.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/AudioInput.h
deleted file mode 100644
index a5c5946b78..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/AudioInput.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for AudioInput.c.
- */
-
-#ifndef _AUDIO_INPUT_H_
-#define _AUDIO_INPUT_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-
-		#include "Descriptors.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/Peripheral/ADC.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** Maximum audio sample value for the microphone input. */
-		#define SAMPLE_MAX_RANGE          0xFFFF
-
-		/** Maximum ADC range for the microphone input. */
-		#define ADC_MAX_RANGE             0x3FF
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/AudioInput.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/AudioInput.txt
deleted file mode 100644
index 9dc6c36b88..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/AudioInput.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Audio Input Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Standard Audio Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Audio 1.0 Class Specification \n
- *        USBIF Audio 1.0 Class Terminal Types Specification \n
- *        USBIF Audio 1.0 Data Formats Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Audio demonstration application. This gives a simple reference
- *  application for implementing a USB Audio Input device using the
- *  basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers
- *  required).
- *
- *  On start-up the system will automatically enumerate and function as a
- *  USB microphone. By default, the demo will produce a square wave test tone
- *  when the board button is pressed. If USE_TEST_TONE is not defined in the
- *  project makefile, incoming audio from the ADC channel 1 will be sampled
- *  and sent to the host computer instead.
- *
- *  When in microphone mode, connect a microphone to the ADC channel 2.
- *
- *  Under Windows, if a driver request dialogue pops up, select the option
- *  to automatically install the appropriate drivers.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>USE_TEST_TONE</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
- *        instead of sampling the board microphone.</td>
- *   </tr>
- *   <tr>
- *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h
deleted file mode 100644
index 8360102f64..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define MIC_IN_ADC_CHANNEL               2
-
-	#define MICROPHONE_BIASED_TO_HALF_RAIL
-	#define USE_TEST_TONE
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/Config/LUFAConfig.h
deleted file mode 100644
index 796221604d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/Descriptors.c
deleted file mode 100644
index ac84eb67e7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/Descriptors.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2047,
-	.ReleaseNumber          = VERSION_BCD(0,0,2),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces          = 2,
-
-			.ConfigurationNumber      = 1,
-			.ConfigurationStrIndex    = NO_DESCRIPTOR,
-
-			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
-		},
-
-	.Audio_ControlInterface =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioControl,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 0,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_ControlSubclass,
-			.Protocol                 = AUDIO_CSCP_ControlProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_ControlInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
-
-			.ACSpecification          = VERSION_BCD(1,0,0),
-			.TotalLength              = (sizeof(USB_Audio_Descriptor_Interface_AC_t) +
-			                             sizeof(USB_Audio_Descriptor_InputTerminal_t) +
-			                             sizeof(USB_Audio_Descriptor_OutputTerminal_t)),
-
-			.InCollection             = 1,
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-		},
-
-	.Audio_InputTerminal =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
-
-			.TerminalID               = 0x01,
-			.TerminalType             = AUDIO_TERMINAL_IN_MIC,
-			.AssociatedOutputTerminal = 0x00,
-
-			.TotalChannels            = 1,
-			.ChannelConfig            = 0,
-
-			.ChannelStrIndex          = NO_DESCRIPTOR,
-			.TerminalStrIndex         = NO_DESCRIPTOR
-		},
-
-	.Audio_OutputTerminal =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
-
-			.TerminalID               = 0x02,
-			.TerminalType             = AUDIO_TERMINAL_STREAMING,
-			.AssociatedInputTerminal  = 0x00,
-
-			.SourceID                 = 0x01,
-
-			.TerminalStrIndex         = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_Alt0 =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 0,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
-			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_Alt1 =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-			.AlternateSetting         = 1,
-
-			.TotalEndpoints           = 1,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
-			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
-
-			.TerminalLink             = 0x02,
-
-			.FrameDelay               = 1,
-			.AudioFormat              = 0x0001
-		},
-
-	.Audio_AudioFormat =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Format_t) +
-			                                     sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates),
-			                             .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_FormatType,
-
-			.FormatType               = 0x01,
-			.Channels                 = 0x01,
-
-			.SubFrameSize             = 0x02,
-			.BitResolution            = 16,
-
-			.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t)),
-		},
-
-	.Audio_AudioFormatSampleRates =
-		{
-			AUDIO_SAMPLE_FREQ(8000),
-			AUDIO_SAMPLE_FREQ(11025),
-			AUDIO_SAMPLE_FREQ(22050),
-			AUDIO_SAMPLE_FREQ(44100),
-			AUDIO_SAMPLE_FREQ(48000),
-		},
-
-	.Audio_StreamEndpoint =
-		{
-			.Endpoint =
-				{
-					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
-
-					.EndpointAddress     = AUDIO_STREAM_EPADDR,
-					.Attributes          = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
-					.EndpointSize        = AUDIO_STREAM_EPSIZE,
-					.PollingIntervalMS   = 0x01
-				},
-
-			.Refresh                  = 0,
-			.SyncEndpointNumber       = 0
-		},
-
-	.Audio_StreamEndpoint_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint},
-			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
-
-			.Attributes               = (AUDIO_EP_ACCEPTS_SMALL_PACKETS | AUDIO_EP_SAMPLE_FREQ_CONTROL),
-
-			.LockDelayUnits           = 0x00,
-			.LockDelay                = 0x0000
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Audio In Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/Descriptors.h
deleted file mode 100644
index 6ab6c0e527..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/Descriptors.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the Audio isochronous streaming data IN endpoint. */
-		#define AUDIO_STREAM_EPADDR          (ENDPOINT_DIR_IN | 1)
-
-		/** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */
-		#define AUDIO_STREAM_EPSIZE           256
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t     Config;
-
-			// Audio Control Interface
-			USB_Descriptor_Interface_t                Audio_ControlInterface;
-			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
-			USB_Audio_Descriptor_InputTerminal_t      Audio_InputTerminal;
-			USB_Audio_Descriptor_OutputTerminal_t     Audio_OutputTerminal;
-
-			// Audio Streaming Interface
-			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt0;
-			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt1;
-			USB_Audio_Descriptor_Interface_AS_t       Audio_StreamInterface_SPC;
-			USB_Audio_Descriptor_Format_t             Audio_AudioFormat;
-			USB_Audio_SampleFreq_t                    Audio_AudioFormatSampleRates[5];
-			USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint;
-			USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
-			INTERFACE_ID_AudioStream  = 1, /**< Audio stream interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/asf.xml
deleted file mode 100644
index dab549a75c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/asf.xml
+++ /dev/null
@@ -1,52 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Audio Input Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_input.example.avr8">

-		<require idref="lufa.demos.device.lowlevel.audio_input"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.lowlevel.audio_input" caption="Audio Input Device Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Audio 1.0 Input device demo, implementing a basic USB microphone. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="Audio Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="AudioInput.txt"/>

-

-		<build type="c-source" value="AudioInput.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="AudioInput.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.adc"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/doxyfile
deleted file mode 100644
index a3181cf7ed..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Audio Input Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/makefile
deleted file mode 100644
index 1acf3b9569..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioInput/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = AudioInput
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/AudioOutput.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/AudioOutput.c
deleted file mode 100644
index 2bccfdee87..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/AudioOutput.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the AudioOutput demo. This file contains the main tasks of the demo and
- *  is responsible for the initial application hardware configuration.
- */
-
-#include "AudioOutput.h"
-
-/** Flag to indicate if the streaming audio alternative interface has been selected by the host. */
-static bool StreamingAudioInterfaceSelected = false;
-
-/** Current audio sampling frequency of the streaming audio endpoint. */
-static uint32_t CurrentAudioSampleFrequency = 48000;
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs, and
- *  configures the sample update and PWM timers.
- */
-void EVENT_USB_Device_Connect(void)
-{
-	/* Indicate USB enumerating */
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	/* Sample reload timer initialization */
-	TIMSK0 = (1 << OCIE0A);
-	OCR0A  = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
-	TCCR0A = (1 << WGM01);  // CTC mode
-	TCCR0B = (1 << CS01);   // Fcpu/8 speed
-
-	#if defined(AUDIO_OUT_MONO)
-	/* Set speaker as output */
-	DDRC  |= (1 << 6);
-	#elif defined(AUDIO_OUT_STEREO)
-	/* Set speakers as outputs */
-	DDRC  |= ((1 << 6) | (1 << 5));
-	#elif defined(AUDIO_OUT_PORTC)
-	/* Set PORTC as outputs */
-	DDRC  |= 0xFF;
-	#endif
-
-	#if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO))
-	/* PWM speaker timer initialization */
-	TCCR3A = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)
-	                       | (1 << COM3B1) | (1 << COM3B0)); // Set on match, clear on TOP
-	TCCR3B = ((1 << WGM32) | (1 << CS30));  // Fast 8-Bit PWM, F_CPU speed
-	#endif
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs, disables the sample update and PWM output timers and stops the USB and Audio management tasks.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Stop the timers */
-	TCCR0B = 0;
-	#if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO))
-	TCCR3B = 0;
-	#endif
-
-	#if defined(AUDIO_OUT_MONO)
-	/* Set speaker as input to reduce current draw */
-	DDRC  &= ~(1 << 6);
-	#elif defined(AUDIO_OUT_STEREO)
-	/* Set speakers as inputs to reduce current draw */
-	DDRC  &= ~((1 << 6) | (1 << 5));
-	#elif defined(AUDIO_OUT_PORTC)
-	/* Set PORTC low */
-	PORTC = 0x00;
-	#endif
-
-	/* Indicate streaming audio interface not selected */
-	StreamingAudioInterfaceSelected = false;
-
-	/* Indicate USB not ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
- *  of the USB device after enumeration - the device endpoints are configured.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup Audio Stream Endpoint */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPADDR, EP_TYPE_ISOCHRONOUS, AUDIO_STREAM_EPSIZE, 2);
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- *  the device from the USB host before passing along unhandled control requests to the library for processing
- *  internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	/* Process General and Audio specific control requests */
-	switch (USB_ControlRequest.bRequest)
-	{
-		case REQ_SetInterface:
-			/* Set Interface is not handled by the library, as its function is application-specific */
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-				Endpoint_ClearStatusStage();
-
-				/* Check if the host is enabling the audio interface (setting AlternateSetting to 1) */
-				StreamingAudioInterfaceSelected = ((USB_ControlRequest.wValue) != 0);
-			}
-
-			break;
-		case AUDIO_REQ_GetStatus:
-			/* Get Status request can be directed at either the interface or endpoint, neither is currently used
-			 * according to the latest USB Audio 1.0 standard, but must be ACKed with no data when requested */
-			if ((USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) ||
-			    (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT)))
-			{
-				Endpoint_ClearSETUP();
-				Endpoint_ClearStatusStage();
-			}
-
-			break;
-		case AUDIO_REQ_SetCurrent:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT))
-			{
-				/* Extract out the relevant request information to get the target Endpoint address and control being set */
-				uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex;
-				uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
-
-				/* Only handle SET CURRENT requests to the audio endpoint's sample frequency property */
-				if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
-				{
-					uint8_t SampleRate[3];
-
-					Endpoint_ClearSETUP();
-					Endpoint_Read_Control_Stream_LE(SampleRate, sizeof(SampleRate));
-					Endpoint_ClearIN();
-
-					/* Set the new sampling frequency to the value given by the host */
-					CurrentAudioSampleFrequency = (((uint32_t)SampleRate[2] << 16) | ((uint32_t)SampleRate[1] << 8) | (uint32_t)SampleRate[0]);
-
-					/* Adjust sample reload timer to the new frequency */
-					OCR0A = ((F_CPU / 8 / CurrentAudioSampleFrequency) - 1);
-				}
-			}
-
-			break;
-		case AUDIO_REQ_GetCurrent:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
-			{
-				/* Extract out the relevant request information to get the target Endpoint address and control being retrieved */
-				uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex;
-				uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
-
-				/* Only handle GET CURRENT requests to the audio endpoint's sample frequency property */
-				if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq))
-				{
-					uint8_t SampleRate[3];
-
-					/* Convert the sampling rate value into the 24-bit format the host expects for the property */
-					SampleRate[2] = (CurrentAudioSampleFrequency >> 16);
-					SampleRate[1] = (CurrentAudioSampleFrequency >> 8);
-					SampleRate[0] = (CurrentAudioSampleFrequency &  0xFF);
-
-					Endpoint_ClearSETUP();
-					Endpoint_Write_Control_Stream_LE(SampleRate, sizeof(SampleRate));
-					Endpoint_ClearOUT();
-				}
-			}
-
-			break;
-	}
-}
-
-/** ISR to handle the reloading of the PWM timer with the next sample. */
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)
-{
-	uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
-
-	/* Select the audio stream endpoint */
-	Endpoint_SelectEndpoint(AUDIO_STREAM_EPADDR);
-
-	/* Check if the current endpoint can be read from (contains a packet) and the host is sending data */
-	if (Endpoint_IsOUTReceived() && StreamingAudioInterfaceSelected)
-	{
-		/* Retrieve the signed 16-bit left and right audio samples, convert to 8-bit */
-		int8_t LeftSample_8Bit   = ((int16_t)Endpoint_Read_16_LE() >> 8);
-		int8_t RightSample_8Bit  = ((int16_t)Endpoint_Read_16_LE() >> 8);
-
-		/* Mix the two channels together to produce a mono, 8-bit sample */
-		int8_t MixedSample_8Bit  = (((int16_t)LeftSample_8Bit + (int16_t)RightSample_8Bit) >> 1);
-
-		/* Check to see if the bank is now empty */
-		if (!(Endpoint_IsReadWriteAllowed()))
-		{
-			/* Acknowledge the packet, clear the bank ready for the next packet */
-			Endpoint_ClearOUT();
-		}
-
-		#if defined(AUDIO_OUT_MONO)
-		/* Load the sample into the PWM timer channel */
-		OCR3A = (MixedSample_8Bit ^ (1 << 7));
-		#elif defined(AUDIO_OUT_STEREO)
-		/* Load the dual 8-bit samples into the PWM timer channels */
-		OCR3A = (LeftSample_8Bit  ^ (1 << 7));
-		OCR3B = (RightSample_8Bit ^ (1 << 7));
-		#elif defined(AUDIO_OUT_PORTC)
-		/* Load the 8-bit mixed sample into PORTC */
-		PORTC = MixedSample_8Bit;
-		#endif
-
-		uint8_t LEDMask = LEDS_NO_LEDS;
-
-		/* Turn on LEDs as the sample amplitude increases */
-		if (MixedSample_8Bit > 16)
-		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4);
-		else if (MixedSample_8Bit > 8)
-		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3);
-		else if (MixedSample_8Bit > 4)
-		  LEDMask = (LEDS_LED1 | LEDS_LED2);
-		else if (MixedSample_8Bit > 2)
-		  LEDMask = (LEDS_LED1);
-
-		LEDs_SetAllLEDs(LEDMask);
-	}
-
-	Endpoint_SelectEndpoint(PrevEndpoint);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/AudioOutput.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/AudioOutput.h
deleted file mode 100644
index bbac4dff66..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/AudioOutput.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for AudioOutput.c.
- */
-
-#ifndef _AUDIO_OUTPUT_H_
-#define _AUDIO_OUTPUT_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-
-		#include "Descriptors.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt
deleted file mode 100644
index 8f0c7d656c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Audio Output Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Standard Audio Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Audio 1.0 Class Specification \n
- *        USBIF Audio 1.0 Class Terminal Types Specification \n
- *        USBIF Audio 1.0 Data Formats Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Audio demonstration application. This gives a simple reference
- *  application for implementing a USB Audio Output device using the
- *  basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers
- *  required).
- *
- *  On start-up the system will automatically enumerate and function
- *  as a USB speaker. Outgoing audio will output in 8-bit PWM onto
- *  the timer 3 output compare channel A for AUDIO_OUT_MONO mode, on
- *  timer 3 channels A and B for AUDIO_OUT_STEREO and on PORTC as a signed
- *  mono sample for AUDIO_OUT_PORTC. Audio output will also be indicated on
- *  the board LEDs in all modes. Decouple audio outputs with a capacitor and
- *  attach to a speaker to hear the audio.
- *
- *  Under Windows, if a driver request dialogue pops up, select the option
- *  to automatically install the appropriate drivers.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>AUDIO_OUT_STEREO</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller.</td>
- *   </tr>
- *   <tr>
- *    <td>AUDIO_OUT_MONO</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller.</td>
- *   </tr>
- *   <tr>
- *    <td>AUDIO_OUT_PORTC</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an
- *        external DAC.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/Config/AppConfig.h
deleted file mode 100644
index e6684a611d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/Config/AppConfig.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define AUDIO_OUT_STEREO
-//	#define AUDIO_OUT_MONO
-//	#define AUDIO_OUT_PORTC
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/Config/LUFAConfig.h
deleted file mode 100644
index 796221604d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/Descriptors.c
deleted file mode 100644
index dc5c420a99..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/Descriptors.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2046,
-	.ReleaseNumber          = VERSION_BCD(0,0,2),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces          = 2,
-
-			.ConfigurationNumber      = 1,
-			.ConfigurationStrIndex    = NO_DESCRIPTOR,
-
-			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
-		},
-
-	.Audio_ControlInterface =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioControl,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 0,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_ControlSubclass,
-			.Protocol                 = AUDIO_CSCP_ControlProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_ControlInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
-
-			.ACSpecification          = VERSION_BCD(1,0,0),
-			.TotalLength              = (sizeof(USB_Audio_Descriptor_Interface_AC_t) +
-			                             sizeof(USB_Audio_Descriptor_InputTerminal_t) +
-			                             sizeof(USB_Audio_Descriptor_OutputTerminal_t)),
-
-			.InCollection             = 1,
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-		},
-
-	.Audio_InputTerminal =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
-
-			.TerminalID               = 0x01,
-			.TerminalType             = AUDIO_TERMINAL_STREAMING,
-			.AssociatedOutputTerminal = 0x00,
-
-			.TotalChannels            = 2,
-			.ChannelConfig            = (AUDIO_CHANNEL_LEFT_FRONT | AUDIO_CHANNEL_RIGHT_FRONT),
-
-			.ChannelStrIndex          = NO_DESCRIPTOR,
-			.TerminalStrIndex         = NO_DESCRIPTOR
-		},
-
-	.Audio_OutputTerminal =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
-
-			.TerminalID               = 0x02,
-			.TerminalType             = AUDIO_TERMINAL_OUT_SPEAKER,
-			.AssociatedInputTerminal  = 0x00,
-
-			.SourceID                 = 0x01,
-
-			.TerminalStrIndex         = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_Alt0 =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 0,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
-			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_Alt1 =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-			.AlternateSetting         = 1,
-
-			.TotalEndpoints           = 1,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_AudioStreamingSubclass,
-			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
-
-			.TerminalLink             = 0x01,
-
-			.FrameDelay               = 1,
-			.AudioFormat              = 0x0001
-		},
-
-	.Audio_AudioFormat =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Format_t) +
-			                                     sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates),
-			                             .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_FormatType,
-
-			.FormatType               = 0x01,
-			.Channels                 = 0x02,
-
-			.SubFrameSize             = 0x02,
-			.BitResolution            = 16,
-
-			.TotalDiscreteSampleRates = (sizeof(ConfigurationDescriptor.Audio_AudioFormatSampleRates) / sizeof(USB_Audio_SampleFreq_t)),
-		},
-
-	.Audio_AudioFormatSampleRates =
-		{
-			AUDIO_SAMPLE_FREQ(8000),
-			AUDIO_SAMPLE_FREQ(11025),
-			AUDIO_SAMPLE_FREQ(22050),
-			AUDIO_SAMPLE_FREQ(44100),
-			AUDIO_SAMPLE_FREQ(48000),
-		},
-
-	.Audio_StreamEndpoint =
-		{
-			.Endpoint =
-				{
-					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
-
-					.EndpointAddress     = AUDIO_STREAM_EPADDR,
-					.Attributes          = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA),
-					.EndpointSize        = AUDIO_STREAM_EPSIZE,
-					.PollingIntervalMS   = 0x01
-				},
-
-			.Refresh                  = 0,
-			.SyncEndpointNumber       = 0
-		},
-
-	.Audio_StreamEndpoint_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint},
-			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
-
-			.Attributes               = (AUDIO_EP_ACCEPTS_SMALL_PACKETS | AUDIO_EP_SAMPLE_FREQ_CONTROL),
-
-			.LockDelayUnits           = 0x00,
-			.LockDelay                = 0x0000
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Audio Out Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/Descriptors.h
deleted file mode 100644
index 8219112839..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/Descriptors.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the Audio isochronous streaming data OUT endpoint. */
-		#define AUDIO_STREAM_EPADDR          (ENDPOINT_DIR_OUT | 1)
-
-		/** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */
-		#define AUDIO_STREAM_EPSIZE           256
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t     Config;
-
-			// Audio Control Interface
-			USB_Descriptor_Interface_t                Audio_ControlInterface;
-			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
-			USB_Audio_Descriptor_InputTerminal_t      Audio_InputTerminal;
-			USB_Audio_Descriptor_OutputTerminal_t     Audio_OutputTerminal;
-
-			// Audio Streaming Interface
-			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt0;
-			USB_Descriptor_Interface_t                Audio_StreamInterface_Alt1;
-			USB_Audio_Descriptor_Interface_AS_t       Audio_StreamInterface_SPC;
-			USB_Audio_Descriptor_Format_t             Audio_AudioFormat;
-			USB_Audio_SampleFreq_t                    Audio_AudioFormatSampleRates[5];
-			USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint;
-			USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
-			INTERFACE_ID_AudioStream  = 1, /**< Audio stream interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/asf.xml
deleted file mode 100644
index cddfb85438..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/asf.xml
+++ /dev/null
@@ -1,51 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Audio Output Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_output.example.avr8">

-		<require idref="lufa.demos.device.lowlevel.audio_output"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.lowlevel.audio_output" caption="Audio Output Device Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Audio 1.0 Output device demo, implementing a basic USB speaker. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="Audio Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="AudioOutput.txt"/>

-

-		<build type="c-source" value="AudioOutput.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="AudioOutput.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/doxyfile
deleted file mode 100644
index 03c33a2d4f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Audio Output Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = YES
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/makefile
deleted file mode 100644
index c4c9441725..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/AudioOutput/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = AudioOutput
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/BulkVendor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/BulkVendor.c
deleted file mode 100644
index 14d0982859..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/BulkVendor.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the Bulk Vendor demo. This file contains the main tasks of the demo and
- *  is responsible for the initial application hardware configuration.
- */
-
-#define  INCLUDE_FROM_BULKVENDOR_C
-#include "BulkVendor.h"
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		USB_USBTask();
-
-		uint8_t ReceivedData[VENDOR_IO_EPSIZE];
-		memset(ReceivedData, 0x00, sizeof(ReceivedData));
-
-		Endpoint_SelectEndpoint(VENDOR_OUT_EPADDR);
-		if (Endpoint_IsOUTReceived())
-		{
-			Endpoint_Read_Stream_LE(ReceivedData, VENDOR_IO_EPSIZE, NULL);
-			Endpoint_ClearOUT();
-
-			Endpoint_SelectEndpoint(VENDOR_IN_EPADDR);
-			Endpoint_Write_Stream_LE(ReceivedData, VENDOR_IO_EPSIZE, NULL);
-			Endpoint_ClearIN();
-		}
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
-void EVENT_USB_Device_Connect(void)
-{
-	/* Indicate USB enumerating */
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Indicate USB not ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
- *  of the USB device after enumeration - the device endpoints are configured.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup Vendor Data Endpoints */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(VENDOR_IN_EPADDR,  EP_TYPE_BULK, VENDOR_IO_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(VENDOR_OUT_EPADDR, EP_TYPE_BULK, VENDOR_IO_EPSIZE, 1);
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- *  the device from the USB host before passing along unhandled control requests to the library for processing
- *  internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	// Process vendor specific control requests here
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/BulkVendor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/BulkVendor.h
deleted file mode 100644
index 3350e0e27c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/BulkVendor.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for BulkVendor.c.
- */
-
-#ifndef _BULK_VENDOR_H_
-#define _BULK_VENDOR_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY       LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING   (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY         (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR         (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY           LEDS_LED2
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/BulkVendor.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/BulkVendor.txt
deleted file mode 100644
index 0fe7cb950f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/BulkVendor.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Bulk Vendor Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Vendor (no official class)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Vendor (no official subclass)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>None</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Bulk Vendor demonstration application. This gives a simple reference
- *  application for implementing a USB device that contains read/write bulk type
- *  endpoints, for implementing custom USB protocols.
- *
- *  On start-up the system will automatically enumerate and echo back packets
- *  sent from the host.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/Config/LUFAConfig.h
deleted file mode 100644
index 3c3b68bb1a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               4
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/Descriptors.c
deleted file mode 100644
index 5eaff96e27..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/Descriptors.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x206C,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = USB_CONFIG_ATTR_RESERVED,
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.Vendor_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Vendor,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = 0xFF,
-			.SubClass               = 0xFF,
-			.Protocol               = 0xFF,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.Vendor_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = VENDOR_IN_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = VENDOR_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.Vendor_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = VENDOR_OUT_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = VENDOR_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Bulk Vendor Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/Descriptors.h
deleted file mode 100644
index 6fe1d79175..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/Descriptors.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-	/* Macros: */
-		/** Endpoint address of the Bulk Vendor device-to-host data IN endpoint. */
-		#define VENDOR_IN_EPADDR               (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the Bulk Vendor host-to-device data OUT endpoint. */
-		#define VENDOR_OUT_EPADDR              (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the Bulk Vendor data endpoints. */
-		#define VENDOR_IO_EPSIZE               64
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Vendor Interface
-			USB_Descriptor_Interface_t            Vendor_Interface;
-			USB_Descriptor_Endpoint_t             Vendor_DataInEndpoint;
-			USB_Descriptor_Endpoint_t             Vendor_DataOutEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_Vendor = 0, /**< Vendor interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/HostTestApp/test_bulk_vendor.py b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/HostTestApp/test_bulk_vendor.py
deleted file mode 100644
index 882bd284d0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/HostTestApp/test_bulk_vendor.py
+++ /dev/null
@@ -1,67 +0,0 @@
-"""
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-"""
-
-"""
-    LUFA Bulk Vendor device demo host test script. This script will send and
-    receive a continuous stream of packets to/from to the device, to show
-    bidirectional communications.
-
-    Requires the pyUSB library (http://sourceforge.net/projects/pyusb/).
-"""
-
-import sys
-from time import sleep
-import usb.core
-import usb.util
-
-# Bulk Vendor HID device VID and PID
-device_vid = 0x03EB
-device_pid = 0x206C
-device_in_ep  = 3
-device_out_ep = 4
-
-
-def get_vendor_device_handle():
-	dev_handle = usb.core.find(idVendor=device_vid, idProduct=device_pid)
-	return dev_handle
-
-
-def write(device, packet):
-    device.write(usb.util.ENDPOINT_OUT | device_out_ep, packet, 0, 1000)
-    print("Sent Packet: {0}".format(packet))
-
-
-def read(device):
-    packet = device.read(usb.util.ENDPOINT_IN | device_in_ep, 64, 0, 1000)
-    print("Received Packet: {0}".format(''.join([chr(x) for x in packet])))
-    return packet
-
-
-def main():
-    vendor_device = get_vendor_device_handle()
-
-    if vendor_device is None:
-        print("No valid Vendor device found.")
-        sys.exit(1)
-
-    vendor_device.set_configuration()
-
-    print("Connected to device 0x%04X/0x%04X - %s [%s]" %
-          (vendor_device.idVendor, vendor_device.idProduct,
-           usb.util.get_string(vendor_device, 255, vendor_device.iProduct),
-           usb.util.get_string(vendor_device, 255, vendor_device.iManufacturer)))
-
-    x = 0
-    while 1:
-    	x = x + 1 % 255
-    	write(vendor_device, "TEST PACKET %d" % x)
-    	read(vendor_device)
-    	sleep(1)
-
-if __name__ == '__main__':
-    main()
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/LUFA_Bulk_Vendor_Demo.inf b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/LUFA_Bulk_Vendor_Demo.inf
deleted file mode 100644
index 32a29fdc50..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/LUFA_Bulk_Vendor_Demo.inf
+++ /dev/null
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.dll b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.dll
deleted file mode 100644
index f916b08986..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.dll
+++ /dev/null
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.sys b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.sys
deleted file mode 100644
index 0718dfb7c0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/amd64/libusb0.sys
+++ /dev/null
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.dll b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.dll
deleted file mode 100644
index 292df27857..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.dll
+++ /dev/null
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.sys b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.sys
deleted file mode 100644
index f17914b8c4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/ia64/libusb0.sys
+++ /dev/null
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x64.exe b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x64.exe
deleted file mode 100644
index c38919ee50..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x64.exe
+++ /dev/null
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x86.exe b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x86.exe
deleted file mode 100644
index 030ec300c2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/installer_x86.exe
+++ /dev/null
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/license/libusb0/installer_license.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/license/libusb0/installer_license.txt
deleted file mode 100644
index 56bb2cda25..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/license/libusb0/installer_license.txt
+++ /dev/null
@@ -1,851 +0,0 @@
-Copyright (c) 2002-2004 Stephan Meyer, <ste_meyer@web.de>
-Copyright (c) 2000-2004 Johannes Erdfelt, <johannes@erdfelt.com>
-Copyright (c) 2000-2004 Thomas Sailer, <sailer@ife.ee.ethz.ch>
-Copyright (c) 2010 Travis Robinson, <libusbdotnet@gmail.com>
-
-This software is distributed under the following licenses:
-Driver:      GNU General Public License (GPL)
-Library, Test Files, Installer:    GNU Lesser General Public License (LGPL)
-
-***********************************************************************
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
-
-  The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works.  By contrast,
-the GNU General Public License is intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users.  We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors.  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
-  To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights.  Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received.  You must make sure that they, too, receive
-or can get the source code.  And you must show them these terms so they
-know their rights.
-
-  Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
-
-  For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software.  For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
-
-  Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so.  This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software.  The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable.  Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products.  If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
-  Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary.  To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                       TERMS AND CONDITIONS
-
-  0. Definitions.
-
-  "This License" refers to version 3 of the GNU General Public License.
-
-  "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
-  "The Program" refers to any copyrightable work licensed under this
-License.  Each licensee is addressed as "you".  "Licensees" and
-"recipients" may be individuals or organizations.
-
-  To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy.  The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
-  A "covered work" means either the unmodified Program or a work based
-on the Program.
-
-  To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy.  Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
-  To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies.  Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
-  An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License.  If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
-  1. Source Code.
-
-  The "source code" for a work means the preferred form of the work
-for making modifications to it.  "Object code" means any non-source
-form of a work.
-
-  A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
-  The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form.  A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
-  The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities.  However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work.  For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
-  The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
-  The Corresponding Source for a work in source code form is that
-same work.
-
-  2. Basic Permissions.
-
-  All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met.  This License explicitly affirms your unlimited
-permission to run the unmodified Program.  The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work.  This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
-  You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force.  You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright.  Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
-  Conveying under any other circumstances is permitted solely under
-the conditions stated below.  Sublicensing is not allowed; section 10
-makes it unnecessary.
-
-  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
-  No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
-  When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
-  4. Conveying Verbatim Copies.
-
-  You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
-  You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
-  5. Conveying Modified Source Versions.
-
-  You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
-    a) The work must carry prominent notices stating that you modified
-    it, and giving a relevant date.
-
-    b) The work must carry prominent notices stating that it is
-    released under this License and any conditions added under section
-    7.  This requirement modifies the requirement in section 4 to
-    "keep intact all notices".
-
-    c) You must license the entire work, as a whole, under this
-    License to anyone who comes into possession of a copy.  This
-    License will therefore apply, along with any applicable section 7
-    additional terms, to the whole of the work, and all its parts,
-    regardless of how they are packaged.  This License gives no
-    permission to license the work in any other way, but it does not
-    invalidate such permission if you have separately received it.
-
-    d) If the work has interactive user interfaces, each must display
-    Appropriate Legal Notices; however, if the Program has interactive
-    interfaces that do not display Appropriate Legal Notices, your
-    work need not make them do so.
-
-  A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit.  Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
-  6. Conveying Non-Source Forms.
-
-  You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
-    a) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by the
-    Corresponding Source fixed on a durable physical medium
-    customarily used for software interchange.
-
-    b) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by a
-    written offer, valid for at least three years and valid for as
-    long as you offer spare parts or customer support for that product
-    model, to give anyone who possesses the object code either (1) a
-    copy of the Corresponding Source for all the software in the
-    product that is covered by this License, on a durable physical
-    medium customarily used for software interchange, for a price no
-    more than your reasonable cost of physically performing this
-    conveying of source, or (2) access to copy the
-    Corresponding Source from a network server at no charge.
-
-    c) Convey individual copies of the object code with a copy of the
-    written offer to provide the Corresponding Source.  This
-    alternative is allowed only occasionally and noncommercially, and
-    only if you received the object code with such an offer, in accord
-    with subsection 6b.
-
-    d) Convey the object code by offering access from a designated
-    place (gratis or for a charge), and offer equivalent access to the
-    Corresponding Source in the same way through the same place at no
-    further charge.  You need not require recipients to copy the
-    Corresponding Source along with the object code.  If the place to
-    copy the object code is a network server, the Corresponding Source
-    may be on a different server (operated by you or a third party)
-    that supports equivalent copying facilities, provided you maintain
-    clear directions next to the object code saying where to find the
-    Corresponding Source.  Regardless of what server hosts the
-    Corresponding Source, you remain obligated to ensure that it is
-    available for as long as needed to satisfy these requirements.
-
-    e) Convey the object code using peer-to-peer transmission, provided
-    you inform other peers where the object code and Corresponding
-    Source of the work are being offered to the general public at no
-    charge under subsection 6d.
-
-  A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
-  A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling.  In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage.  For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product.  A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
-  "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source.  The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
-  If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information.  But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
-  The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed.  Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
-  Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
-  7. Additional Terms.
-
-  "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law.  If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
-  When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it.  (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.)  You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
-  Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
-    a) Disclaiming warranty or limiting liability differently from the
-    terms of sections 15 and 16 of this License; or
-
-    b) Requiring preservation of specified reasonable legal notices or
-    author attributions in that material or in the Appropriate Legal
-    Notices displayed by works containing it; or
-
-    c) Prohibiting misrepresentation of the origin of that material, or
-    requiring that modified versions of such material be marked in
-    reasonable ways as different from the original version; or
-
-    d) Limiting the use for publicity purposes of names of licensors or
-    authors of the material; or
-
-    e) Declining to grant rights under trademark law for use of some
-    trade names, trademarks, or service marks; or
-
-    f) Requiring indemnification of licensors and authors of that
-    material by anyone who conveys the material (or modified versions of
-    it) with contractual assumptions of liability to the recipient, for
-    any liability that these contractual assumptions directly impose on
-    those licensors and authors.
-
-  All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10.  If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term.  If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
-  If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
-  Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
-  8. Termination.
-
-  You may not propagate or modify a covered work except as expressly
-provided under this License.  Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
-  However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
-  Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
-  Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License.  If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
-  9. Acceptance Not Required for Having Copies.
-
-  You are not required to accept this License in order to receive or
-run a copy of the Program.  Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance.  However,
-nothing other than this License grants you permission to propagate or
-modify any covered work.  These actions infringe copyright if you do
-not accept this License.  Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
-  10. Automatic Licensing of Downstream Recipients.
-
-  Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License.  You are not responsible
-for enforcing compliance by third parties with this License.
-
-  An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations.  If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
-  You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License.  For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
-  11. Patents.
-
-  A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based.  The
-work thus licensed is called the contributor's "contributor version".
-
-  A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version.  For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
-  Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
-  In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement).  To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
-  If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients.  "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
-  If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
-  A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License.  You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
-  Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
-  12. No Surrender of Others' Freedom.
-
-  If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all.  For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
-  13. Use with the GNU Affero General Public License.
-
-  Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
-combined work, and to convey the resulting work.  The terms of this
-License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
-
-  14. Revised Versions of this License.
-
-  The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-  Each version is given a distinguishing version number.  If the
-Program specifies that a certain numbered version of the GNU General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation.  If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
-  If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
-  Later license versions may give you additional or different
-permissions.  However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
-  15. Disclaimer of Warranty.
-
-  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. Limitation of Liability.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
-  17. Interpretation of Sections 15 and 16.
-
-  If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
-  If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
-    <program>  Copyright (C) <year>  <name of author>
-    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
-
-  You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<http://www.gnu.org/licenses/>.
-
-  The GNU General Public License does not permit incorporating your program
-into proprietary programs.  If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.  But first, please read
-<http://www.gnu.org/philosophy/why-not-lgpl.html>.
-
-                   GNU LESSER GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-
-  This version of the GNU Lesser General Public License incorporates
-the terms and conditions of version 3 of the GNU General Public
-License, supplemented by the additional permissions listed below.
-
-  0. Additional Definitions.
-
-  As used herein, "this License" refers to version 3 of the GNU Lesser
-General Public License, and the "GNU GPL" refers to version 3 of the GNU
-General Public License.
-
-  "The Library" refers to a covered work governed by this License,
-other than an Application or a Combined Work as defined below.
-
-  An "Application" is any work that makes use of an interface provided
-by the Library, but which is not otherwise based on the Library.
-Defining a subclass of a class defined by the Library is deemed a mode
-of using an interface provided by the Library.
-
-  A "Combined Work" is a work produced by combining or linking an
-Application with the Library.  The particular version of the Library
-with which the Combined Work was made is also called the "Linked
-Version".
-
-  The "Minimal Corresponding Source" for a Combined Work means the
-Corresponding Source for the Combined Work, excluding any source code
-for portions of the Combined Work that, considered in isolation, are
-based on the Application, and not on the Linked Version.
-
-  The "Corresponding Application Code" for a Combined Work means the
-object code and/or source code for the Application, including any data
-and utility programs needed for reproducing the Combined Work from the
-Application, but excluding the System Libraries of the Combined Work.
-
-  1. Exception to Section 3 of the GNU GPL.
-
-  You may convey a covered work under sections 3 and 4 of this License
-without being bound by section 3 of the GNU GPL.
-
-  2. Conveying Modified Versions.
-
-  If you modify a copy of the Library, and, in your modifications, a
-facility refers to a function or data to be supplied by an Application
-that uses the facility (other than as an argument passed when the
-facility is invoked), then you may convey a copy of the modified
-version:
-
-   a) under this License, provided that you make a good faith effort to
-   ensure that, in the event an Application does not supply the
-   function or data, the facility still operates, and performs
-   whatever part of its purpose remains meaningful, or
-
-   b) under the GNU GPL, with none of the additional permissions of
-   this License applicable to that copy.
-
-  3. Object Code Incorporating Material from Library Header Files.
-
-  The object code form of an Application may incorporate material from
-a header file that is part of the Library.  You may convey such object
-code under terms of your choice, provided that, if the incorporated
-material is not limited to numerical parameters, data structure
-layouts and accessors, or small macros, inline functions and templates
-(ten or fewer lines in length), you do both of the following:
-
-   a) Give prominent notice with each copy of the object code that the
-   Library is used in it and that the Library and its use are
-   covered by this License.
-
-   b) Accompany the object code with a copy of the GNU GPL and this license
-   document.
-
-  4. Combined Works.
-
-  You may convey a Combined Work under terms of your choice that,
-taken together, effectively do not restrict modification of the
-portions of the Library contained in the Combined Work and reverse
-engineering for debugging such modifications, if you also do each of
-the following:
-
-   a) Give prominent notice with each copy of the Combined Work that
-   the Library is used in it and that the Library and its use are
-   covered by this License.
-
-   b) Accompany the Combined Work with a copy of the GNU GPL and this license
-   document.
-
-   c) For a Combined Work that displays copyright notices during
-   execution, include the copyright notice for the Library among
-   these notices, as well as a reference directing the user to the
-   copies of the GNU GPL and this license document.
-
-   d) Do one of the following:
-
-       0) Convey the Minimal Corresponding Source under the terms of this
-       License, and the Corresponding Application Code in a form
-       suitable for, and under terms that permit, the user to
-       recombine or relink the Application with a modified version of
-       the Linked Version to produce a modified Combined Work, in the
-       manner specified by section 6 of the GNU GPL for conveying
-       Corresponding Source.
-
-       1) Use a suitable shared library mechanism for linking with the
-       Library.  A suitable mechanism is one that (a) uses at run time
-       a copy of the Library already present on the user's computer
-       system, and (b) will operate properly with a modified version
-       of the Library that is interface-compatible with the Linked
-       Version.
-
-   e) Provide Installation Information, but only if you would otherwise
-   be required to provide such information under section 6 of the
-   GNU GPL, and only to the extent that such information is
-   necessary to install and execute a modified version of the
-   Combined Work produced by recombining or relinking the
-   Application with a modified version of the Linked Version. (If
-   you use option 4d0, the Installation Information must accompany
-   the Minimal Corresponding Source and Corresponding Application
-   Code. If you use option 4d1, you must provide the Installation
-   Information in the manner specified by section 6 of the GNU GPL
-   for conveying Corresponding Source.)
-
-  5. Combined Libraries.
-
-  You may place library facilities that are a work based on the
-Library side by side in a single library together with other library
-facilities that are not Applications and are not covered by this
-License, and convey such a combined library under terms of your
-choice, if you do both of the following:
-
-   a) Accompany the combined library with a copy of the same work based
-   on the Library, uncombined with any other library facilities,
-   conveyed under the terms of this License.
-
-   b) Give prominent notice with the combined library that part of it
-   is a work based on the Library, and explaining where to find the
-   accompanying uncombined form of the same work.
-
-  6. Revised Versions of the GNU Lesser General Public License.
-
-  The Free Software Foundation may publish revised and/or new versions
-of the GNU Lesser General Public License from time to time. Such new
-versions will be similar in spirit to the present version, but may
-differ in detail to address new problems or concerns.
-
-  Each version is given a distinguishing version number. If the
-Library as you received it specifies that a certain numbered version
-of the GNU Lesser General Public License "or any later version"
-applies to it, you have the option of following the terms and
-conditions either of that published version or of any later version
-published by the Free Software Foundation. If the Library as you
-received it does not specify a version number of the GNU Lesser
-General Public License, you may choose any version of the GNU Lesser
-General Public License ever published by the Free Software Foundation.
-
-  If the Library as you received it specifies that a proxy can decide
-whether future versions of the GNU Lesser General Public License shall
-apply, that proxy's public statement of acceptance of any version is
-permanent authorization for you to choose that version for the
-Library.
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/x86/libusb0.sys b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/x86/libusb0.sys
deleted file mode 100644
index 5322e5b978..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/x86/libusb0.sys
+++ /dev/null
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/x86/libusb0_x86.dll b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/x86/libusb0_x86.dll
deleted file mode 100644
index 6e475b90ac..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/WindowsDriver/x86/libusb0_x86.dll
+++ /dev/null
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/asf.xml
deleted file mode 100644
index e87f33eb01..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/asf.xml
+++ /dev/null
@@ -1,61 +0,0 @@
-<asf xmlversion="1.0">
-	<project caption="Bulk Vendor Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.vendor.example.avr8">
-		<require idref="lufa.demos.device.lowlevel.vendor"/>
-		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
-
-		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
-
-		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
-
-	<project caption="Bulk Vendor Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.vendor.example.xmega">
-		<require idref="lufa.demos.device.lowlevel.vendor"/>
-		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
-
-		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
-
-		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
-
-	<module type="application" id="lufa.demos.device.lowlevel.vendor" caption="Bulk Vendor Device Demo (Low Level APIs)">
-		<info type="description" value="summary">
-		Bulk Vendor Device demo, implementing a basic USB device with vendor-specific endpoints for custom protocol implementations. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
-
- 		<info type="gui-flag" value="move-to-root"/>
-
-		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
-			<keyword value="USB Device"/>
-		</info>
-
-		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
-
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="BulkVendor.txt"/>
-		<build type="distribute" subtype="directory" value="HostTestApp"/>
-		<build type="distribute" subtype="directory" value="WindowsDriver"/>
-
-		<build type="c-source" value="BulkVendor.c"/>
-		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="BulkVendor.h"/>
-		<build type="header-file" value="Descriptors.h"/>
-
-		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
-
-		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
-	</module>
-</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/doxyfile
deleted file mode 100644
index 0d711a935e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/doxyfile
+++ /dev/null
@@ -1,2366 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Bulk Vendor Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/ \
-                         HostTestApp/ \
-                         WindowsDriver/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/makefile
deleted file mode 100644
index b2ecfc9c60..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/BulkVendor/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = BulkVendor
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/Config/LUFAConfig.h
deleted file mode 100644
index 39b5236fec..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               6
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c
deleted file mode 100644
index 9952ed92cf..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_IADDeviceClass,
-	.SubClass               = USB_CSCP_IADDeviceSubclass,
-	.Protocol               = USB_CSCP_IADDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x204E,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 4,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.CDC1_IAD =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
-
-			.FirstInterfaceIndex    = INTERFACE_ID_CDC1_CCI,
-			.TotalInterfaces        = 2,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.IADStrIndex            = NO_DESCRIPTOR
-		},
-
-	.CDC1_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC1_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC1_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC1_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x06,
-		},
-
-	.CDC1_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC1_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC1_DCI,
-		},
-
-	.CDC1_ManagementEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC1_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC1_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC1_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC1_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC1_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC1_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC1_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC2_IAD =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
-
-			.FirstInterfaceIndex    = INTERFACE_ID_CDC2_CCI,
-			.TotalInterfaces        = 2,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.IADStrIndex            = NO_DESCRIPTOR
-		},
-
-	.CDC2_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC2_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC2_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC2_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x06,
-		},
-
-	.CDC2_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC2_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC2_DCI,
-		},
-
-	.CDC2_ManagementEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC2_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC2_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC2_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC2_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC2_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC2_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC2_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Dual CDC Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h
deleted file mode 100644
index e0842a4986..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-	/* Macros: */
-		/** Endpoint address of the first CDC interface's device-to-host data IN endpoint. */
-		#define CDC1_TX_EPADDR                 (ENDPOINT_DIR_IN  | 1)
-
-		/** Endpoint address of the first CDC interface's host-to-device data OUT endpoint. */
-		#define CDC1_RX_EPADDR                 (ENDPOINT_DIR_OUT | 2)
-
-		/** Endpoint address of the first CDC interface's device-to-host notification IN endpoint. */
-		#define CDC1_NOTIFICATION_EPADDR       (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the second CDC interface's device-to-host data IN endpoint. */
-		#define CDC2_TX_EPADDR                 (ENDPOINT_DIR_IN  | 4)
-
-		/** Endpoint address of the second CDC interface's host-to-device data OUT endpoint. */
-		#define CDC2_RX_EPADDR                 (ENDPOINT_DIR_OUT | 5)
-
-		/** Endpoint address of the second CDC interface's device-to-host notification IN endpoint. */
-		#define CDC2_NOTIFICATION_EPADDR       (ENDPOINT_DIR_IN  | 6)
-
-		/** Size in bytes of the CDC device-to-host notification IN endpoints. */
-		#define CDC_NOTIFICATION_EPSIZE        8
-
-		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                16
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t    Config;
-
-			// First CDC Control Interface
-			USB_Descriptor_Interface_Association_t   CDC1_IAD;
-			USB_Descriptor_Interface_t               CDC1_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t    CDC1_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t       CDC1_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t     CDC1_Functional_Union;
-			USB_Descriptor_Endpoint_t                CDC1_ManagementEndpoint;
-
-			// First CDC Data Interface
-			USB_Descriptor_Interface_t               CDC1_DCI_Interface;
-			USB_Descriptor_Endpoint_t                CDC1_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t                CDC1_DataInEndpoint;
-
-			// Second CDC Control Interface
-			USB_Descriptor_Interface_Association_t   CDC2_IAD;
-			USB_Descriptor_Interface_t               CDC2_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t    CDC2_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t       CDC2_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t     CDC2_Functional_Union;
-			USB_Descriptor_Endpoint_t                CDC2_ManagementEndpoint;
-
-			// Second CDC Data Interface
-			USB_Descriptor_Interface_t               CDC2_DCI_Interface;
-			USB_Descriptor_Endpoint_t                CDC2_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t                CDC2_DataInEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_CDC1_CCI = 0, /**< CDC1 CCI interface descriptor ID */
-			INTERFACE_ID_CDC1_DCI = 1, /**< CDC1 DCI interface descriptor ID */
-			INTERFACE_ID_CDC2_CCI = 2, /**< CDC2 CCI interface descriptor ID */
-			INTERFACE_ID_CDC2_DCI = 3, /**< CDC2 DCI interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c
deleted file mode 100644
index 233ae750eb..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the DualVirtualSerial demo. This file contains the main tasks of the demo and
- *  is responsible for the initial application hardware configuration.
- */
-
-#include "DualVirtualSerial.h"
-
-/** Contains the current baud rate and other settings of the first virtual serial port. While this demo does not use
- *  the physical USART and thus does not use these settings, they must still be retained and returned to the host
- *  upon request or the host will assume the device is non-functional.
- *
- *  These values are set by the host via a class-specific request, however they are not required to be used accurately.
- *  It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
- *  serial link characteristics and instead sends and receives data in endpoint streams.
- */
-static CDC_LineEncoding_t LineEncoding1 = { .BaudRateBPS = 0,
-                                            .CharFormat  = CDC_LINEENCODING_OneStopBit,
-                                            .ParityType  = CDC_PARITY_None,
-                                            .DataBits    = 8                            };
-
-/** Contains the current baud rate and other settings of the second virtual serial port. While this demo does not use
- *  the physical USART and thus does not use these settings, they must still be retained and returned to the host
- *  upon request or the host will assume the device is non-functional.
- *
- *  These values are set by the host via a class-specific request, however they are not required to be used accurately.
- *  It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
- *  serial link characteristics and instead sends and receives data in endpoint streams.
- */
-static CDC_LineEncoding_t LineEncoding2 = { .BaudRateBPS = 0,
-                                            .CharFormat  = CDC_LINEENCODING_OneStopBit,
-                                            .ParityType  = CDC_PARITY_None,
-                                            .DataBits    = 8                            };
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		CDC1_Task();
-		CDC2_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Device_Connect(void)
-{
-	/* Indicate USB enumerating */
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs and stops the USB management and CDC management tasks.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Indicate USB not ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
- *  of the USB device after enumeration - the device endpoints are configured and the CDC management tasks are started.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup first CDC Interface's Endpoints */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1);
-
-	/* Setup second CDC Interface's Endpoints */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1);
-
-	/* Reset line encoding baud rates so that the host knows to send new values */
-	LineEncoding1.BaudRateBPS = 0;
-	LineEncoding2.BaudRateBPS = 0;
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- *  the device from the USB host before passing along unhandled control requests to the library for processing
- *  internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	/* Determine which interface's Line Coding data is being set from the wIndex parameter */
-	void* LineEncodingData = (USB_ControlRequest.wIndex == 0) ? &LineEncoding1 : &LineEncoding2;
-
-	/* Process CDC specific control requests */
-	switch (USB_ControlRequest.bRequest)
-	{
-		case CDC_REQ_GetLineEncoding:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-
-				/* Write the line coding data to the control endpoint */
-				Endpoint_Write_Control_Stream_LE(LineEncodingData, sizeof(CDC_LineEncoding_t));
-				Endpoint_ClearOUT();
-			}
-
-			break;
-		case CDC_REQ_SetLineEncoding:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-
-				/* Read the line coding data in from the host into the global struct */
-				Endpoint_Read_Control_Stream_LE(LineEncodingData, sizeof(CDC_LineEncoding_t));
-				Endpoint_ClearIN();
-			}
-
-			break;
-		case CDC_REQ_SetControlLineState:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-				Endpoint_ClearStatusStage();
-			}
-
-			break;
-	}
-}
-
-/** Function to manage CDC data transmission and reception to and from the host for the first CDC interface, which sends joystick
- *  movements to the host as ASCII strings.
- */
-void CDC1_Task(void)
-{
-	char*       ReportString    = NULL;
-	uint8_t     JoyStatus_LCL   = Joystick_GetStatus();
-	static bool ActionSent      = false;
-
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	/* Determine if a joystick action has occurred */
-	if (JoyStatus_LCL & JOY_UP)
-	  ReportString = "Joystick Up\r\n";
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  ReportString = "Joystick Down\r\n";
-	else if (JoyStatus_LCL & JOY_LEFT)
-	  ReportString = "Joystick Left\r\n";
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  ReportString = "Joystick Right\r\n";
-	else if (JoyStatus_LCL & JOY_PRESS)
-	  ReportString = "Joystick Pressed\r\n";
-	else
-	  ActionSent = false;
-
-	/* Flag management - Only allow one string to be sent per action */
-	if ((ReportString != NULL) && (ActionSent == false) && LineEncoding1.BaudRateBPS)
-	{
-		ActionSent = true;
-
-		/* Select the Serial Tx Endpoint */
-		Endpoint_SelectEndpoint(CDC1_TX_EPADDR);
-
-		/* Write the String to the Endpoint */
-		Endpoint_Write_Stream_LE(ReportString, strlen(ReportString), NULL);
-
-		/* Finalize the stream transfer to send the last packet */
-		Endpoint_ClearIN();
-
-		/* Wait until the endpoint is ready for another packet */
-		Endpoint_WaitUntilReady();
-
-		/* Send an empty packet to ensure that the host does not buffer data sent to it */
-		Endpoint_ClearIN();
-	}
-
-	/* Select the Serial Rx Endpoint */
-	Endpoint_SelectEndpoint(CDC1_RX_EPADDR);
-
-	/* Throw away any received data from the host */
-	if (Endpoint_IsOUTReceived())
-	  Endpoint_ClearOUT();
-}
-
-/** Function to manage CDC data transmission and reception to and from the host for the second CDC interface, which echoes back
- *  all data sent to it from the host.
- */
-void CDC2_Task(void)
-{
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	/* Select the Serial Rx Endpoint */
-	Endpoint_SelectEndpoint(CDC2_RX_EPADDR);
-
-	/* Check to see if any data has been received */
-	if (Endpoint_IsOUTReceived())
-	{
-		/* Create a temp buffer big enough to hold the incoming endpoint packet */
-		uint8_t  Buffer[Endpoint_BytesInEndpoint()];
-
-		/* Remember how large the incoming packet is */
-		uint16_t DataLength = Endpoint_BytesInEndpoint();
-
-		/* Read in the incoming packet into the buffer */
-		Endpoint_Read_Stream_LE(&Buffer, DataLength, NULL);
-
-		/* Finalize the stream transfer to send the last packet */
-		Endpoint_ClearOUT();
-
-		/* Select the Serial Tx Endpoint */
-		Endpoint_SelectEndpoint(CDC2_TX_EPADDR);
-
-		/* Write the received data to the endpoint */
-		Endpoint_Write_Stream_LE(&Buffer, DataLength, NULL);
-
-		/* Finalize the stream transfer to send the last packet */
-		Endpoint_ClearIN();
-
-		/* Wait until the endpoint is ready for the next packet */
-		Endpoint_WaitUntilReady();
-
-		/* Send an empty packet to prevent host buffering */
-		Endpoint_ClearIN();
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h
deleted file mode 100644
index a8bc4ec4ea..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DualVirtualSerial.c.
- */
-
-#ifndef _DUAL_VIRTUALSERIAL_H_
-#define _DUAL_VIRTUALSERIAL_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void CDC1_Task(void);
-		void CDC2_Task(void);
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt
deleted file mode 100644
index af263cc751..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Dual Communications Device Class (Dual Virtual Serial Port) Device
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Interface Association Descriptor ECN \n
- *        USBIF CDC Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Dual Communications Device Class demonstration application.
- *  This gives a simple reference application for implementing
- *  a compound device with dual CDC functions acting as a pair
- *  of virtual serial ports. This demo uses Interface Association
- *  Descriptors to link together the pair of related CDC
- *  descriptors for each virtual serial port, which may not be
- *  supported in all OSes - Windows Vista is supported, as is
- *  XP (although the latter may need a hotfix to function).
- *
- *  Joystick actions are transmitted to the host as strings
- *  through the first serial port. The device does not respond to
- *  serial data sent from the host in the first serial port.
- *
- *  The second serial port echoes back data sent from the host.
- *
- *  After running this demo for the first time on a new computer,
- *  you will need to supply the .INF file located in this demo
- *  project's directory as the device's driver when running under
- *  Windows. This will enable Windows to use its inbuilt CDC drivers,
- *  negating the need for custom drivers for the device. Other
- *  Operating Systems should automatically use their own inbuilt
- *  CDC-ACM drivers.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/LUFA DualVirtualSerial.inf b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/LUFA DualVirtualSerial.inf
deleted file mode 100644
index 1a0e0248af..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/LUFA DualVirtualSerial.inf
+++ /dev/null
@@ -1,66 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-;************************************************************
-
-[DefaultInstall]
-CopyINF="LUFA DualVirtualSerial.inf"
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-DriverVer=7/1/2012,10.0.0.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
-
-[SourceDisksNames]
-
-[SourceDisksFiles]
-
-[DestinationDirs]
-DefaultDestDir=12
-
-[DriverInstall]
-Include=mdmcpq.inf
-CopyFiles=FakeModemCopyFileSection
-AddReg=DriverInstall.AddReg
-
-[DriverInstall.Services]
-Include=mdmcpq.inf
-AddService=usbser, 0x00000002, LowerFilter_Service_Inst
-
-[DriverInstall.AddReg]
-HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
-
-[DeviceList.NTx86]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
-
-[DeviceList.NTia64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204E&MI_00, USB\VID_03EB&PID_204E&MI_02
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGNAME="http://www.lufa-lib.org"
-DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/asf.xml
deleted file mode 100644
index 133d1b4f82..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/asf.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.avr8">

-		<require idref="lufa.demos.device.lowlevel.dual_cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.xmega">

-		<require idref="lufa.demos.device.lowlevel.dual_cdc"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.lowlevel.dual_cdc" caption="Dual Virtual Serial Device Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Dual Virtual Serial (CDC) demo, implementing a pair of virtual serial port interfaces. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="CDC Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="DualVirtualSerial.txt"/>

-		<build type="distribute" subtype="user-file" value="LUFA DualVirtualSerial.inf"/>

-

-		<build type="c-source" value="DualVirtualSerial.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="DualVirtualSerial.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.joystick"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/doxyfile
deleted file mode 100644
index 4ed8962f9c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Dual Virtual Serial Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/makefile
deleted file mode 100644
index 7b140fedb0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/DualVirtualSerial/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = DualVirtualSerial
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/Config/AppConfig.h
deleted file mode 100644
index 47b8ffef8b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/Config/AppConfig.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define GENERIC_REPORT_SIZE       8
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/Config/LUFAConfig.h
deleted file mode 100644
index a06b60275c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               2
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/Descriptors.c
deleted file mode 100644
index f104d1fd28..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/Descriptors.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] =
-{
-	HID_RI_USAGE_PAGE(16, 0xFF00), /* Vendor Page 0 */
-	HID_RI_USAGE(8, 0x01), /* Vendor Usage 1 */
-	HID_RI_COLLECTION(8, 0x01), /* Vendor Usage 1 */
-	    HID_RI_USAGE(8, 0x02), /* Vendor Usage 2 */
-	    HID_RI_LOGICAL_MINIMUM(8, 0x00),
-	    HID_RI_LOGICAL_MAXIMUM(8, 0xFF),
-	    HID_RI_REPORT_SIZE(8, 0x08),
-	    HID_RI_REPORT_COUNT(8, GENERIC_REPORT_SIZE),
-	    HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
-	    HID_RI_USAGE(8, 0x03), /* Vendor Usage 3 */
-	    HID_RI_LOGICAL_MINIMUM(8, 0x00),
-	    HID_RI_LOGICAL_MAXIMUM(8, 0xFF),
-	    HID_RI_REPORT_SIZE(8, 0x08),
-	    HID_RI_REPORT_COUNT(8, GENERIC_REPORT_SIZE),
-	    HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
-	HID_RI_END_COLLECTION(0),
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x204F,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.HID_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_GenericHID,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_NonBootSubclass,
-			.Protocol               = HID_CSCP_NonBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_GenericHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(GenericReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = GENERIC_IN_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = GENERIC_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.HID_ReportOUTEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = GENERIC_OUT_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = GENERIC_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Generic HID Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_GenericHID;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case HID_DTYPE_Report:
-			Address = &GenericReport;
-			Size    = sizeof(GenericReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/Descriptors.h
deleted file mode 100644
index 8e359682b6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/Descriptors.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Generic HID Interface
-			USB_Descriptor_Interface_t            HID_Interface;
-			USB_HID_Descriptor_HID_t              HID_GenericHID;
-			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
-			USB_Descriptor_Endpoint_t             HID_ReportOUTEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_GenericHID = 0, /**< GenericHID interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Macros: */
-		/** Endpoint address of the Generic HID reporting IN endpoint. */
-		#define GENERIC_IN_EPADDR         (ENDPOINT_DIR_IN  | 1)
-
-		/** Endpoint address of the Generic HID reporting OUT endpoint. */
-		#define GENERIC_OUT_EPADDR        (ENDPOINT_DIR_OUT | 2)
-
-		/** Size in bytes of the Generic HID reporting endpoint. */
-		#define GENERIC_EPSIZE            8
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/GenericHID.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/GenericHID.c
deleted file mode 100644
index 8a8f2c0f31..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/GenericHID.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the GenericHID demo. This file contains the main tasks of the demo and
- *  is responsible for the initial application hardware configuration.
- */
-
-#include "GenericHID.h"
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		HID_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Device_Connect(void)
-{
-	/* Indicate USB enumerating */
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs and stops the USB management task.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Indicate USB not ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
- *  of the USB device after enumeration, and configures the generic HID device endpoints.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup HID Report Endpoints */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(GENERIC_IN_EPADDR, EP_TYPE_INTERRUPT, GENERIC_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(GENERIC_OUT_EPADDR, EP_TYPE_INTERRUPT, GENERIC_EPSIZE, 1);
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- *  the device from the USB host before passing along unhandled control requests to the library for processing
- *  internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	/* Handle HID Class specific requests */
-	switch (USB_ControlRequest.bRequest)
-	{
-		case HID_REQ_GetReport:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				uint8_t GenericData[GENERIC_REPORT_SIZE];
-				CreateGenericHIDReport(GenericData);
-
-				Endpoint_ClearSETUP();
-
-				/* Write the report data to the control endpoint */
-				Endpoint_Write_Control_Stream_LE(&GenericData, sizeof(GenericData));
-				Endpoint_ClearOUT();
-			}
-
-			break;
-		case HID_REQ_SetReport:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				uint8_t GenericData[GENERIC_REPORT_SIZE];
-
-				Endpoint_ClearSETUP();
-
-				/* Read the report data from the control endpoint */
-				Endpoint_Read_Control_Stream_LE(&GenericData, sizeof(GenericData));
-				Endpoint_ClearIN();
-
-				ProcessGenericHIDReport(GenericData);
-			}
-
-			break;
-	}
-}
-
-/** Function to process the last received report from the host.
- *
- *  \param[in] DataArray  Pointer to a buffer where the last received report has been stored
- */
-void ProcessGenericHIDReport(uint8_t* DataArray)
-{
-	/*
-		This is where you need to process reports sent from the host to the device. This
-		function is called each time the host has sent a new report. DataArray is an array
-		holding the report sent from the host.
-	*/
-
-	uint8_t NewLEDMask = LEDS_NO_LEDS;
-
-	if (DataArray[0])
-	  NewLEDMask |= LEDS_LED1;
-
-	if (DataArray[1])
-	  NewLEDMask |= LEDS_LED2;
-
-	if (DataArray[2])
-	  NewLEDMask |= LEDS_LED3;
-
-	if (DataArray[3])
-	  NewLEDMask |= LEDS_LED4;
-
-	LEDs_SetAllLEDs(NewLEDMask);
-}
-
-/** Function to create the next report to send back to the host at the next reporting interval.
- *
- *  \param[out] DataArray  Pointer to a buffer where the next report data should be stored
- */
-void CreateGenericHIDReport(uint8_t* DataArray)
-{
-	/*
-		This is where you need to create reports to be sent to the host from the device. This
-		function is called each time the host is ready to accept a new report. DataArray is
-		an array to hold the report to the host.
-	*/
-
-	uint8_t CurrLEDMask = LEDs_GetLEDs();
-
-	DataArray[0] = ((CurrLEDMask & LEDS_LED1) ? 1 : 0);
-	DataArray[1] = ((CurrLEDMask & LEDS_LED2) ? 1 : 0);
-	DataArray[2] = ((CurrLEDMask & LEDS_LED3) ? 1 : 0);
-	DataArray[3] = ((CurrLEDMask & LEDS_LED4) ? 1 : 0);
-}
-
-void HID_Task(void)
-{
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	Endpoint_SelectEndpoint(GENERIC_OUT_EPADDR);
-
-	/* Check to see if a packet has been sent from the host */
-	if (Endpoint_IsOUTReceived())
-	{
-		/* Check to see if the packet contains data */
-		if (Endpoint_IsReadWriteAllowed())
-		{
-			/* Create a temporary buffer to hold the read in report from the host */
-			uint8_t GenericData[GENERIC_REPORT_SIZE];
-
-			/* Read Generic Report Data */
-			Endpoint_Read_Stream_LE(&GenericData, sizeof(GenericData), NULL);
-
-			/* Process Generic Report Data */
-			ProcessGenericHIDReport(GenericData);
-		}
-
-		/* Finalize the stream transfer to send the last packet */
-		Endpoint_ClearOUT();
-	}
-
-	Endpoint_SelectEndpoint(GENERIC_IN_EPADDR);
-
-	/* Check to see if the host is ready to accept another packet */
-	if (Endpoint_IsINReady())
-	{
-		/* Create a temporary buffer to hold the report to send to the host */
-		uint8_t GenericData[GENERIC_REPORT_SIZE];
-
-		/* Create Generic Report Data */
-		CreateGenericHIDReport(GenericData);
-
-		/* Write Generic Report Data */
-		Endpoint_Write_Stream_LE(&GenericData, sizeof(GenericData), NULL);
-
-		/* Finalize the stream transfer to send the last packet */
-		Endpoint_ClearIN();
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/GenericHID.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/GenericHID.h
deleted file mode 100644
index 6c76643461..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/GenericHID.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for GenericHID.c.
- */
-
-#ifndef _GENERICHID_H_
-#define _GENERICHID_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void HID_Task(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-		void ProcessGenericHIDReport(uint8_t* DataArray);
-		void CreateGenericHIDReport(uint8_t* DataArray);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/GenericHID.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/GenericHID.txt
deleted file mode 100644
index 649fc62ce4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/GenericHID.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Generic HID Device
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Generic HID device demonstration application. This gives a simple reference application
- *  for implementing a generic HID device, using the basic USB HID drivers in all modern
- *  OSes (i.e. no special drivers required). By default it accepts and sends up to 8 byte reports
- *  to and from a USB Host, and transmits the last sent report back to the host.
- *
- *  On start-up the system will automatically enumerate and function as a vendor HID device.
- *  When controlled by a custom HID class application, reports can be sent and received by
- *  both the standard data endpoint and control request methods defined in the HID specification.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>GENERIC_REPORT_SIZE</td>
- *    <td>AppConfig.h</td>
- *    <td>This token defines the size of the device reports, both sent and received (including report ID byte). The value
- *        must be an integer ranging from 1 to 255.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/HostTestApp/test_generic_hid.py b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/HostTestApp/test_generic_hid.py
deleted file mode 100644
index 2865772804..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/HostTestApp/test_generic_hid.py
+++ /dev/null
@@ -1,96 +0,0 @@
-"""
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-"""
-
-"""
-    LUFA Generic HID device demo host test script. This script will send a
-    continuous stream of generic reports to the device, to show a variable LED
-    pattern on the target board. Send and received report data is printed to
-    the terminal.
-
-    Requires the pywinusb library (https://pypi.python.org/pypi/pywinusb/).
-"""
-
-import sys
-from time import sleep
-import pywinusb.hid as hid
-
-# Generic HID device VID, PID and report payload length (length is increased
-# by one to account for the Report ID byte that must be pre-pended)
-device_vid = 0x03EB
-device_pid = 0x204F
-report_length = 1 + 8
-
-
-def get_hid_device_handle():
-    hid_device_filter = hid.HidDeviceFilter(vendor_id=device_vid,
-                                            product_id=device_pid)
-
-    valid_hid_devices = hid_device_filter.get_devices()
-
-    if len(valid_hid_devices) is 0:
-        return None
-    else:
-        return valid_hid_devices[0]
-
-
-def send_led_pattern(device, led1, led2, led3, led4):
-    # Report data for the demo is the report ID (always zero) followed by the
-    # LED on/off data
-    report_data = [0, led1, led2, led3, led4]
-
-    # Zero-extend the array to the length the report should be
-    report_data.extend([0] * (report_length - len(report_data)))
-
-    # Send the generated report to the device
-    device.send_output_report(report_data)
-
-    print("Sent LED Pattern: {0}".format(report_data[1:5]))
-
-
-def received_led_pattern(report_data):
-    print("Received LED Pattern: {0}".format(report_data[1:5]))
-
-
-def main():
-    hid_device = get_hid_device_handle()
-
-    if hid_device is None:
-        print("No valid HID device found.")
-        sys.exit(1)
-
-    try:
-        hid_device.open()
-
-        print("Connected to device 0x%04X/0x%04X - %s [%s]" %
-              (hid_device.vendor_id, hid_device.product_id,
-               hid_device.product_name, hid_device.vendor_name))
-
-        # Set up the HID input report handler to receive reports
-        hid_device.set_raw_data_handler(received_led_pattern)
-
-        p = 0
-        while (hid_device.is_plugged()):
-            # Convert the current pattern index to a bit-mask and send
-            send_led_pattern(hid_device,
-                             (p >> 3) & 1,
-                             (p >> 2) & 1,
-                             (p >> 1) & 1,
-                             (p >> 0) & 1)
-
-            # Compute next LED pattern in sequence
-            p = (p + 1) % 16
-
-            # Delay a bit for visual effect
-            sleep(.2)
-
-    finally:
-        hid_device.close()
-
-
-if __name__ == '__main__':
-    main()
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/asf.xml
deleted file mode 100644
index cf1fb80090..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/asf.xml
+++ /dev/null
@@ -1,63 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.avr8">

-		<require idref="lufa.demos.device.lowlevel.generic_hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.xmega">

-		<require idref="lufa.demos.device.lowlevel.generic_hid"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.lowlevel.generic_hid" caption="Generic HID Device Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Generic HID device demo, implementing a device whose LEDs can be controlled via HID messages from the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="GenericHID.txt"/>

-		<build type="distribute" subtype="directory" value="HostTestApp"/>

-

-		<build type="c-source" value="GenericHID.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="GenericHID.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/doxyfile
deleted file mode 100644
index e8808812e5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/doxyfile
+++ /dev/null
@@ -1,2365 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Generic HID Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/ \
-                         HostTestApp/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/makefile
deleted file mode 100644
index 48c47d901b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/GenericHID/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = GenericHID
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Config/LUFAConfig.h
deleted file mode 100644
index c6542445da..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               1
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Descriptors.c
deleted file mode 100644
index ec0ef595c6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Descriptors.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM JoystickReport[] =
-{
-	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
-	HID_RI_USAGE(8, 0x04), /* Joystick */
-	HID_RI_COLLECTION(8, 0x01), /* Application */
-		HID_RI_USAGE(8, 0x01), /* Pointer */
-		HID_RI_COLLECTION(8, 0x00), /* Physical */
-			HID_RI_USAGE(8, 0x30), /* Usage X */
-			HID_RI_USAGE(8, 0x31), /* Usage Y */
-			HID_RI_USAGE(8, 0x32), /* Usage Z */
-			HID_RI_LOGICAL_MINIMUM(8, -100),
-			HID_RI_LOGICAL_MAXIMUM(8, 100),
-			HID_RI_PHYSICAL_MINIMUM(8, -1),
-			HID_RI_PHYSICAL_MAXIMUM(8, 1),
-			HID_RI_REPORT_COUNT(8, 0x03),
-			HID_RI_REPORT_SIZE(8, 0x08),
-			HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
-		HID_RI_END_COLLECTION(0),
-		HID_RI_USAGE_PAGE(8, 0x09), /* Button */
-		HID_RI_USAGE_MINIMUM(8, 0x01),
-		HID_RI_USAGE_MAXIMUM(8, 0x02),
-		HID_RI_LOGICAL_MINIMUM(8, 0x00),
-		HID_RI_LOGICAL_MAXIMUM(8, 0x01),
-		HID_RI_REPORT_SIZE(8, 0x01),
-		HID_RI_REPORT_COUNT(8, 0x02),
-		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
-		HID_RI_REPORT_SIZE(8, 0x06),
-		HID_RI_REPORT_COUNT(8, 0x01),
-		HID_RI_INPUT(8, HID_IOF_CONSTANT),
-	HID_RI_END_COLLECTION(0),
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2043,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.HID_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Joystick,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_NonBootSubclass,
-			.Protocol               = HID_CSCP_NonBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_JoystickHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(JoystickReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = JOYSTICK_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = JOYSTICK_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Joystick Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_JoystickHID;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case DTYPE_Report:
-			Address = &JoystickReport;
-			Size    = sizeof(JoystickReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Descriptors.h
deleted file mode 100644
index d4d1487233..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Descriptors.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Joystick HID Interface
-			USB_Descriptor_Interface_t            HID_Interface;
-			USB_HID_Descriptor_HID_t              HID_JoystickHID;
-			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_Joystick = 0, /**< Joystick interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Macros: */
-		/** Endpoint address of the Joystick HID reporting IN endpoint. */
-		#define JOYSTICK_EPADDR           (ENDPOINT_DIR_IN | 1)
-
-		/** Size in bytes of the Joystick HID reporting IN endpoint. */
-		#define JOYSTICK_EPSIZE           8
-
-		/** Descriptor header type value, to indicate a HID class HID descriptor. */
-		#define DTYPE_HID                 0x21
-
-		/** Descriptor header type value, to indicate a HID class HID report descriptor. */
-		#define DTYPE_Report              0x22
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Joystick.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Joystick.c
deleted file mode 100644
index cabb6d6a36..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Joystick.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the Joystick demo. This file contains the main tasks of the demo and
- *  is responsible for the initial application hardware configuration.
- */
-
-#include "Joystick.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		HID_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	Buttons_Init();
-	USB_Init();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Device_Connect(void)
-{
-	/* Indicate USB enumerating */
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs and stops the USB management and joystick reporting tasks.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Indicate USB not ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
- *  of the USB device after enumeration - the device endpoints are configured and the joystick reporting task started.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup HID Report Endpoint */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(JOYSTICK_EPADDR, EP_TYPE_INTERRUPT, JOYSTICK_EPSIZE, 1);
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- *  the device from the USB host before passing along unhandled control requests to the library for processing
- *  internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	/* Handle HID Class specific requests */
-	switch (USB_ControlRequest.bRequest)
-	{
-		case HID_REQ_GetReport:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				USB_JoystickReport_Data_t JoystickReportData;
-
-				/* Create the next HID report to send to the host */
-				GetNextReport(&JoystickReportData);
-
-				Endpoint_ClearSETUP();
-
-				/* Write the report data to the control endpoint */
-				Endpoint_Write_Control_Stream_LE(&JoystickReportData, sizeof(JoystickReportData));
-				Endpoint_ClearOUT();
-			}
-
-			break;
-	}
-}
-
-/** Fills the given HID report data structure with the next HID report to send to the host.
- *
- *  \param[out] ReportData  Pointer to a HID report data structure to be filled
- *
- *  \return Boolean \c true if the new report differs from the last report, \c false otherwise
- */
-bool GetNextReport(USB_JoystickReport_Data_t* const ReportData)
-{
-	static uint8_t PrevJoyStatus    = 0;
-	static uint8_t PrevButtonStatus = 0;
-	uint8_t        JoyStatus_LCL    = Joystick_GetStatus();
-	uint8_t        ButtonStatus_LCL = Buttons_GetStatus();
-	bool           InputChanged     = false;
-
-	/* Clear the report contents */
-	memset(ReportData, 0, sizeof(USB_JoystickReport_Data_t));
-
-	if (JoyStatus_LCL & JOY_UP)
-	  ReportData->Y = -100;
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  ReportData->Y =  100;
-
-	if (JoyStatus_LCL & JOY_LEFT)
-	  ReportData->X = -100;
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  ReportData->X =  100;
-
-	if (JoyStatus_LCL & JOY_PRESS)
-	  ReportData->Button |= (1 << 1);
-
-	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
-	  ReportData->Button |= (1 << 0);
-
-	/* Check if the new report is different to the previous report */
-	InputChanged = (uint8_t)(PrevJoyStatus ^ JoyStatus_LCL) | (uint8_t)(PrevButtonStatus ^ ButtonStatus_LCL);
-
-	/* Save the current joystick status for later comparison */
-	PrevJoyStatus    = JoyStatus_LCL;
-	PrevButtonStatus = ButtonStatus_LCL;
-
-	/* Return whether the new report is different to the previous report or not */
-	return InputChanged;
-}
-
-/** Function to manage HID report generation and transmission to the host. */
-void HID_Task(void)
-{
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	/* Select the Joystick Report Endpoint */
-	Endpoint_SelectEndpoint(JOYSTICK_EPADDR);
-
-	/* Check to see if the host is ready for another packet */
-	if (Endpoint_IsINReady())
-	{
-		USB_JoystickReport_Data_t JoystickReportData;
-
-		/* Create the next HID report to send to the host */
-		GetNextReport(&JoystickReportData);
-
-		/* Write Joystick Report Data */
-		Endpoint_Write_Stream_LE(&JoystickReportData, sizeof(JoystickReportData), NULL);
-
-		/* Finalize the stream transfer to send the last packet */
-		Endpoint_ClearIN();
-
-		/* Clear the report data afterwards */
-		memset(&JoystickReportData, 0, sizeof(JoystickReportData));
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Joystick.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Joystick.h
deleted file mode 100644
index 154819801d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Joystick.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Joystick.c.
- */
-
-#ifndef _JOYSTICK_H_
-#define _JOYSTICK_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Type Defines: */
-		/** Type define for the joystick HID report structure, for creating and sending HID reports to the host PC.
-		 *  This mirrors the layout described to the host in the HID report descriptor, in Descriptors.c.
-		 */
-		typedef struct
-		{
-			int8_t  X; /**< Current absolute joystick X position, as a signed 8-bit integer */
-			int8_t  Y; /**< Current absolute joystick Y position, as a signed 8-bit integer */
-			int8_t  Z; /**< Current absolute joystick Z position, as a signed 8-bit integer */
-			uint8_t Button; /**< Bit mask of the currently pressed joystick buttons */
-		} USB_JoystickReport_Data_t;
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void HID_Task(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-		bool GetNextReport(USB_JoystickReport_Data_t* const ReportData);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Joystick.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Joystick.txt
deleted file mode 100644
index e3aec3d703..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/Joystick.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Joystick Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Joystick demonstration application. This gives a simple reference
- *  application for implementing a USB Keyboard device, for USB Joysticks
- *  using the standard Keyboard HID profile.
- *
- *  This device will show up as a generic joystick device, with two buttons.
- *  Pressing the joystick inwards is the first button, and the HWB button
- *  is the second.
- *
- *  Moving the joystick on the selected board moves the joystick location on
- *  the host computer.
- *
- *  Currently only single interface joysticks are supported.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/asf.xml
deleted file mode 100644
index d37741bace..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/asf.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.avr8">

-		<require idref="lufa.demos.device.lowlevel.joystick"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.xmega">

-		<require idref="lufa.demos.device.lowlevel.joystick"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.lowlevel.joystick" caption="Joystick HID Device Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Joystick HID device demo, implementing a basic USB joystick that can send movement information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="Joystick.txt"/>

-

-		<build type="c-source" value="Joystick.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Joystick.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-		<require idref="lufa.drivers.board.joystick"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/doxyfile
deleted file mode 100644
index a48265c0c7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Joystick Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/makefile
deleted file mode 100644
index b26b0317b6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Joystick/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = Joystick
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Config/LUFAConfig.h
deleted file mode 100644
index a06b60275c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               2
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Descriptors.c
deleted file mode 100644
index 23384d407c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Descriptors.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
-{
-	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
-	HID_RI_USAGE(8, 0x06), /* Keyboard */
-	HID_RI_COLLECTION(8, 0x01), /* Application */
-		HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */
-		HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */
-		HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */
-		HID_RI_LOGICAL_MINIMUM(8, 0x00),
-		HID_RI_LOGICAL_MAXIMUM(8, 0x01),
-		HID_RI_REPORT_SIZE(8, 0x01),
-		HID_RI_REPORT_COUNT(8, 0x08),
-		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
-		HID_RI_REPORT_COUNT(8, 0x01),
-		HID_RI_REPORT_SIZE(8, 0x08),
-		HID_RI_INPUT(8, HID_IOF_CONSTANT),
-		HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */
-		HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */
-		HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */
-		HID_RI_REPORT_COUNT(8, 0x05),
-		HID_RI_REPORT_SIZE(8, 0x01),
-		HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
-		HID_RI_REPORT_COUNT(8, 0x01),
-		HID_RI_REPORT_SIZE(8, 0x03),
-		HID_RI_OUTPUT(8, HID_IOF_CONSTANT),
-		HID_RI_LOGICAL_MINIMUM(8, 0x00),
-		HID_RI_LOGICAL_MAXIMUM(8, 0x65),
-		HID_RI_USAGE_PAGE(8, 0x07), /* Keyboard */
-		HID_RI_USAGE_MINIMUM(8, 0x00), /* Reserved (no event indicated) */
-		HID_RI_USAGE_MAXIMUM(8, 0x65), /* Keyboard Application */
-		HID_RI_REPORT_COUNT(8, 0x06),
-		HID_RI_REPORT_SIZE(8, 0x08),
-		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
-	HID_RI_END_COLLECTION(0),
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2042,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.HID_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Keyboard,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_BootSubclass,
-			.Protocol               = HID_CSCP_KeyboardBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_KeyboardHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(KeyboardReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = KEYBOARD_IN_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = KEYBOARD_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.HID_ReportOUTEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = KEYBOARD_OUT_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = KEYBOARD_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Keyboard Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_KeyboardHID;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case HID_DTYPE_Report:
-			Address = &KeyboardReport;
-			Size    = sizeof(KeyboardReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Descriptors.h
deleted file mode 100644
index 82b316b7e8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Descriptors.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Keyboard HID Interface
-			USB_Descriptor_Interface_t            HID_Interface;
-			USB_HID_Descriptor_HID_t              HID_KeyboardHID;
-			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
-			USB_Descriptor_Endpoint_t             HID_ReportOUTEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_Keyboard = 0, /**< Keyboard interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Macros: */
-		/** Endpoint address of the Keyboard HID reporting IN endpoint. */
-		#define KEYBOARD_IN_EPADDR        (ENDPOINT_DIR_IN  | 1)
-
-		/** Endpoint address of the Keyboard HID reporting OUT endpoint. */
-		#define KEYBOARD_OUT_EPADDR       (ENDPOINT_DIR_OUT | 2)
-
-		/** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */
-		#define KEYBOARD_EPSIZE           8
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Keyboard.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Keyboard.c
deleted file mode 100644
index 7902493d6a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Keyboard.c
+++ /dev/null
@@ -1,383 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the Keyboard demo. This file contains the main tasks of the demo and
- *  is responsible for the initial application hardware configuration.
- */
-
-#include "Keyboard.h"
-
-/** Indicates what report mode the host has requested, true for normal HID reporting mode, \c false for special boot
- *  protocol reporting mode.
- */
-static bool UsingReportProtocol = true;
-
-/** Current Idle period. This is set by the host via a Set Idle HID class request to silence the device's reports
- *  for either the entire idle duration, or until the report status changes (e.g. the user presses a key).
- */
-static uint16_t IdleCount = 500;
-
-/** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle
- *  milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request
- *  the current idle period via a Get Idle HID class request, thus its value must be preserved.
- */
-static uint16_t IdleMSRemaining = 0;
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		HID_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	USB_Init();
-	Buttons_Init();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Device_Connect(void)
-{
-	/* Indicate USB enumerating */
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	/* Default to report protocol on connect */
-	UsingReportProtocol = true;
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Indicate USB not ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
- *  of the USB device after enumeration, and configures the keyboard device endpoints.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup HID Report Endpoints */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPADDR, EP_TYPE_INTERRUPT, KEYBOARD_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPADDR, EP_TYPE_INTERRUPT, KEYBOARD_EPSIZE, 1);
-
-	/* Turn on Start-of-Frame events for tracking HID report period expiry */
-	USB_Device_EnableSOFEvents();
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- *  the device from the USB host before passing along unhandled control requests to the library for processing
- *  internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	/* Handle HID Class specific requests */
-	switch (USB_ControlRequest.bRequest)
-	{
-		case HID_REQ_GetReport:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				USB_KeyboardReport_Data_t KeyboardReportData;
-
-				/* Create the next keyboard report for transmission to the host */
-				CreateKeyboardReport(&KeyboardReportData);
-
-				Endpoint_ClearSETUP();
-
-				/* Write the report data to the control endpoint */
-				Endpoint_Write_Control_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData));
-				Endpoint_ClearOUT();
-			}
-
-			break;
-		case HID_REQ_SetReport:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-
-				/* Wait until the LED report has been sent by the host */
-				while (!(Endpoint_IsOUTReceived()))
-				{
-					if (USB_DeviceState == DEVICE_STATE_Unattached)
-					  return;
-				}
-
-				/* Read in the LED report from the host */
-				uint8_t LEDStatus = Endpoint_Read_8();
-
-				Endpoint_ClearOUT();
-				Endpoint_ClearStatusStage();
-
-				/* Process the incoming LED report */
-				ProcessLEDReport(LEDStatus);
-			}
-
-			break;
-		case HID_REQ_GetProtocol:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-
-				/* Write the current protocol flag to the host */
-				Endpoint_Write_8(UsingReportProtocol);
-
-				Endpoint_ClearIN();
-				Endpoint_ClearStatusStage();
-			}
-
-			break;
-		case HID_REQ_SetProtocol:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-				Endpoint_ClearStatusStage();
-
-				/* Set or clear the flag depending on what the host indicates that the current Protocol should be */
-				UsingReportProtocol = (USB_ControlRequest.wValue != 0);
-			}
-
-			break;
-		case HID_REQ_SetIdle:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-				Endpoint_ClearStatusStage();
-
-				/* Get idle period in MSB, IdleCount must be multiplied by 4 to get number of milliseconds */
-				IdleCount = ((USB_ControlRequest.wValue & 0xFF00) >> 6);
-			}
-
-			break;
-		case HID_REQ_GetIdle:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-
-				/* Write the current idle duration to the host, must be divided by 4 before sent to host */
-				Endpoint_Write_8(IdleCount >> 2);
-
-				Endpoint_ClearIN();
-				Endpoint_ClearStatusStage();
-			}
-
-			break;
-	}
-}
-
-/** Event handler for the USB device Start Of Frame event. */
-void EVENT_USB_Device_StartOfFrame(void)
-{
-	/* One millisecond has elapsed, decrement the idle time remaining counter if it has not already elapsed */
-	if (IdleMSRemaining)
-	  IdleMSRemaining--;
-}
-
-/** Fills the given HID report data structure with the next HID report to send to the host.
- *
- *  \param[out] ReportData  Pointer to a HID report data structure to be filled
- */
-void CreateKeyboardReport(USB_KeyboardReport_Data_t* const ReportData)
-{
-	uint8_t JoyStatus_LCL     = Joystick_GetStatus();
-	uint8_t ButtonStatus_LCL  = Buttons_GetStatus();
-
-	uint8_t UsedKeyCodes      = 0;
-
-	/* Clear the report contents */
-	memset(ReportData, 0, sizeof(USB_KeyboardReport_Data_t));
-
-	/* Make sent key uppercase by indicating that the left shift key is pressed */
-	ReportData->Modifier = HID_KEYBOARD_MODIFIER_LEFTSHIFT;
-
-	if (JoyStatus_LCL & JOY_UP)
-	  ReportData->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_A;
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  ReportData->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_B;
-
-	if (JoyStatus_LCL & JOY_LEFT)
-	  ReportData->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_C;
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  ReportData->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_D;
-
-	if (JoyStatus_LCL & JOY_PRESS)
-	  ReportData->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_E;
-
-	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
-	  ReportData->KeyCode[UsedKeyCodes++] = HID_KEYBOARD_SC_F;
-}
-
-/** Processes a received LED report, and updates the board LEDs states to match.
- *
- *  \param[in] LEDReport  LED status report from the host
- */
-void ProcessLEDReport(const uint8_t LEDReport)
-{
-	uint8_t LEDMask = LEDS_LED2;
-
-	if (LEDReport & HID_KEYBOARD_LED_NUMLOCK)
-	  LEDMask |= LEDS_LED1;
-
-	if (LEDReport & HID_KEYBOARD_LED_CAPSLOCK)
-	  LEDMask |= LEDS_LED3;
-
-	if (LEDReport & HID_KEYBOARD_LED_SCROLLLOCK)
-	  LEDMask |= LEDS_LED4;
-
-	/* Set the status LEDs to the current Keyboard LED status */
-	LEDs_SetAllLEDs(LEDMask);
-}
-
-/** Sends the next HID report to the host, via the keyboard data endpoint. */
-void SendNextReport(void)
-{
-	static USB_KeyboardReport_Data_t PrevKeyboardReportData;
-	USB_KeyboardReport_Data_t        KeyboardReportData;
-	bool                             SendReport = false;
-
-	/* Create the next keyboard report for transmission to the host */
-	CreateKeyboardReport(&KeyboardReportData);
-
-	/* Check if the idle period is set and has elapsed */
-	if (IdleCount && (!(IdleMSRemaining)))
-	{
-		/* Reset the idle time remaining counter */
-		IdleMSRemaining = IdleCount;
-
-		/* Idle period is set and has elapsed, must send a report to the host */
-		SendReport = true;
-	}
-	else
-	{
-		/* Check to see if the report data has changed - if so a report MUST be sent */
-		SendReport = (memcmp(&PrevKeyboardReportData, &KeyboardReportData, sizeof(USB_KeyboardReport_Data_t)) != 0);
-	}
-
-	/* Select the Keyboard Report Endpoint */
-	Endpoint_SelectEndpoint(KEYBOARD_IN_EPADDR);
-
-	/* Check if Keyboard Endpoint Ready for Read/Write and if we should send a new report */
-	if (Endpoint_IsReadWriteAllowed() && SendReport)
-	{
-		/* Save the current report data for later comparison to check for changes */
-		PrevKeyboardReportData = KeyboardReportData;
-
-		/* Write Keyboard Report Data */
-		Endpoint_Write_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData), NULL);
-
-		/* Finalize the stream transfer to send the last packet */
-		Endpoint_ClearIN();
-	}
-}
-
-/** Reads the next LED status report from the host from the LED data endpoint, if one has been sent. */
-void ReceiveNextReport(void)
-{
-	/* Select the Keyboard LED Report Endpoint */
-	Endpoint_SelectEndpoint(KEYBOARD_OUT_EPADDR);
-
-	/* Check if Keyboard LED Endpoint contains a packet */
-	if (Endpoint_IsOUTReceived())
-	{
-		/* Check to see if the packet contains data */
-		if (Endpoint_IsReadWriteAllowed())
-		{
-			/* Read in the LED report from the host */
-			uint8_t LEDReport = Endpoint_Read_8();
-
-			/* Process the read LED report from the host */
-			ProcessLEDReport(LEDReport);
-		}
-
-		/* Handshake the OUT Endpoint - clear endpoint and ready for next report */
-		Endpoint_ClearOUT();
-	}
-}
-
-/** Function to manage HID report generation and transmission to the host, when in report mode. */
-void HID_Task(void)
-{
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	/* Send the next keypress report to the host */
-	SendNextReport();
-
-	/* Process the LED report sent from the host */
-	ReceiveNextReport();
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Keyboard.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Keyboard.h
deleted file mode 100644
index db8def3589..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Keyboard.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Keyboard.c.
- */
-
-#ifndef _KEYBOARD_H_
-#define _KEYBOARD_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY        LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING     (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY           (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR           (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void HID_Task(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-		void CreateKeyboardReport(USB_KeyboardReport_Data_t* const ReportData);
-		void ProcessLEDReport(const uint8_t LEDReport);
-		void SendNextReport(void);
-		void ReceiveNextReport(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Keyboard.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Keyboard.txt
deleted file mode 100644
index a1582a8f94..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/Keyboard.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Keyboard Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Keyboard demonstration application. This gives a simple reference application
- *  for implementing a USB Keyboard using the basic USB HID drivers in all modern
- *  OSes (i.e. no special drivers required). It is boot protocol compatible, and thus
- *  works under compatible BIOS as if it was a native keyboard (e.g. PS/2).
- *
- *  On start-up the system will automatically enumerate and function as a keyboard
- *  when the USB connection to a host is present. To use the keyboard example,
- *  manipulate the joystick to send the letters a, b, c, d and e. See the USB HID
- *  documentation for more information on sending keyboard event and key presses. Unlike
- *  other LUFA Keyboard demos, this example shows explicitly how to send multiple key presses
- *  inside the same report to the host.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/asf.xml
deleted file mode 100644
index 4d386f46fa..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/asf.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.avr8">

-		<require idref="lufa.demos.device.lowlevel.keyboard"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.xmega">

-		<require idref="lufa.demos.device.lowlevel.keyboard"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.lowlevel.keyboard" caption="Keyboard HID Device Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Keyboard HID device demo, implementing a basic USB keyboard that can send key press information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="Keyboard.txt"/>

-

-		<build type="c-source" value="Keyboard.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Keyboard.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.joystick"/>

-		<require idref="lufa.drivers.board.buttons"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/doxyfile
deleted file mode 100644
index 9962d7c796..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Keyboard Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/makefile
deleted file mode 100644
index 1e54ae843d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Keyboard/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = Keyboard
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/Config/LUFAConfig.h
deleted file mode 100644
index fa03979109..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               3
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c
deleted file mode 100644
index 9a79cecf42..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- *
- *  This descriptor describes the mouse HID interface's report structure.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
-{
-	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
-	HID_RI_USAGE(8, 0x02), /* Mouse */
-	HID_RI_COLLECTION(8, 0x01), /* Application */
-		HID_RI_USAGE(8, 0x01), /* Pointer */
-		HID_RI_COLLECTION(8, 0x00), /* Physical */
-			HID_RI_USAGE_PAGE(8, 0x09), /* Button */
-			HID_RI_USAGE_MINIMUM(8, 0x01),
-			HID_RI_USAGE_MAXIMUM(8, 0x03),
-			HID_RI_LOGICAL_MINIMUM(8, 0x00),
-			HID_RI_LOGICAL_MAXIMUM(8, 0x01),
-			HID_RI_REPORT_COUNT(8, 0x03),
-			HID_RI_REPORT_SIZE(8, 0x01),
-			HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
-			HID_RI_REPORT_COUNT(8, 0x01),
-			HID_RI_REPORT_SIZE(8, 0x05),
-			HID_RI_INPUT(8, HID_IOF_CONSTANT),
-			HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
-			HID_RI_USAGE(8, 0x30), /* Usage X */
-			HID_RI_USAGE(8, 0x31), /* Usage Y */
-			HID_RI_LOGICAL_MINIMUM(8, -1),
-			HID_RI_LOGICAL_MAXIMUM(8, 1),
-			HID_RI_PHYSICAL_MINIMUM(8, -1),
-			HID_RI_PHYSICAL_MAXIMUM(8, 1),
-			HID_RI_REPORT_COUNT(8, 0x02),
-			HID_RI_REPORT_SIZE(8, 0x08),
-			HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
-		HID_RI_END_COLLECTION(0),
-	HID_RI_END_COLLECTION(0),
-};
-
-/** Same as the MouseReport structure, but defines the keyboard HID interface's report structure. */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
-{
-	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
-	HID_RI_USAGE(8, 0x06), /* Keyboard */
-	HID_RI_COLLECTION(8, 0x01), /* Application */
-		HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */
-		HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */
-		HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */
-		HID_RI_LOGICAL_MINIMUM(8, 0x00),
-		HID_RI_LOGICAL_MAXIMUM(8, 0x01),
-		HID_RI_REPORT_SIZE(8, 0x01),
-		HID_RI_REPORT_COUNT(8, 0x08),
-		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
-		HID_RI_REPORT_COUNT(8, 0x01),
-		HID_RI_REPORT_SIZE(8, 0x08),
-		HID_RI_INPUT(8, HID_IOF_CONSTANT),
-		HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */
-		HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */
-		HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */
-		HID_RI_REPORT_COUNT(8, 0x05),
-		HID_RI_REPORT_SIZE(8, 0x01),
-		HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),
-		HID_RI_REPORT_COUNT(8, 0x01),
-		HID_RI_REPORT_SIZE(8, 0x03),
-		HID_RI_OUTPUT(8, HID_IOF_CONSTANT),
-		HID_RI_LOGICAL_MINIMUM(8, 0x00),
-		HID_RI_LOGICAL_MAXIMUM(8, 0x65),
-		HID_RI_USAGE_PAGE(8, 0x07), /* Keyboard */
-		HID_RI_USAGE_MINIMUM(8, 0x00), /* Reserved (no event indicated) */
-		HID_RI_USAGE_MAXIMUM(8, 0x65), /* Keyboard Application */
-		HID_RI_REPORT_COUNT(8, 0x06),
-		HID_RI_REPORT_SIZE(8, 0x08),
-		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE),
-	HID_RI_END_COLLECTION(0),
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x204D,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 2,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.HID1_KeyboardInterface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Keyboard,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_BootSubclass,
-			.Protocol               = HID_CSCP_KeyboardBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID1_KeyboardHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(KeyboardReport)
-		},
-
-	.HID1_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = KEYBOARD_IN_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = HID_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.HID1_ReportOUTEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = KEYBOARD_OUT_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = HID_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.HID2_MouseInterface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Mouse,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_BootSubclass,
-			.Protocol               = HID_CSCP_MouseBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID2_MouseHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(MouseReport)
-		},
-
-	.HID2_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MOUSE_IN_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = HID_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mouse and Keyboard Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			switch (wIndex)
-			{
-				case (INTERFACE_ID_Keyboard):
-					Address = &ConfigurationDescriptor.HID1_KeyboardHID;
-					Size    = sizeof(USB_HID_Descriptor_HID_t);
-					break;
-				case (INTERFACE_ID_Mouse):
-					Address = &ConfigurationDescriptor.HID2_MouseHID;
-					Size    = sizeof(USB_HID_Descriptor_HID_t);
-					break;
-			}
-			break;
-		case HID_DTYPE_Report:
-			switch (wIndex)
-			{
-				case INTERFACE_ID_Keyboard:
-					Address = &KeyboardReport;
-					Size    = sizeof(KeyboardReport);
-					break;
-				case INTERFACE_ID_Mouse:
-					Address = &MouseReport;
-					Size    = sizeof(MouseReport);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h
deleted file mode 100644
index bb53313b82..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Keyboard HID Interface
-			USB_Descriptor_Interface_t            HID1_KeyboardInterface;
-			USB_HID_Descriptor_HID_t              HID1_KeyboardHID;
-			USB_Descriptor_Endpoint_t             HID1_ReportINEndpoint;
-			USB_Descriptor_Endpoint_t             HID1_ReportOUTEndpoint;
-
-			// Mouse HID Interface
-			USB_Descriptor_Interface_t            HID2_MouseInterface;
-			USB_HID_Descriptor_HID_t              HID2_MouseHID;
-			USB_Descriptor_Endpoint_t             HID2_ReportINEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_Keyboard = 0, /**< Keyboard interface descriptor ID */
-			INTERFACE_ID_Mouse    = 1, /**< Mouse interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Macros: */
-		/** Endpoint address of the Keyboard HID reporting IN endpoint. */
-		#define KEYBOARD_IN_EPADDR        (ENDPOINT_DIR_IN  | 1)
-
-		/** Endpoint address of the Keyboard HID reporting OUT endpoint. */
-		#define KEYBOARD_OUT_EPADDR       (ENDPOINT_DIR_OUT | 2)
-
-		/** Endpoint address of the Mouse HID reporting IN endpoint. */
-		#define MOUSE_IN_EPADDR           (ENDPOINT_DIR_IN  | 3)
-
-		/** Size in bytes of each of the HID reporting IN and OUT endpoints. */
-		#define HID_EPSIZE                8
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c
deleted file mode 100644
index 831e496199..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the KeyboardMouse demo. This file contains the main tasks of the demo and
- *  is responsible for the initial application hardware configuration.
- */
-
-#include "KeyboardMouse.h"
-
-/** Global structure to hold the current keyboard interface HID report, for transmission to the host */
-static USB_KeyboardReport_Data_t KeyboardReportData;
-
-/** Global structure to hold the current mouse interface HID report, for transmission to the host */
-static USB_MouseReport_Data_t MouseReportData;
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		Keyboard_HID_Task();
-		Mouse_HID_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Device_Connect(void)
-{
-	/* Indicate USB enumerating */
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs and stops the USB management task.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Indicate USB not ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
- *  of the USB device after enumeration, and configures the keyboard and mouse device endpoints.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup Keyboard HID Report Endpoints */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPADDR, EP_TYPE_INTERRUPT, HID_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPADDR, EP_TYPE_INTERRUPT, HID_EPSIZE, 1);
-
-	/* Setup Mouse HID Report Endpoint */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_IN_EPADDR, EP_TYPE_INTERRUPT, HID_EPSIZE, 1);
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- *  the device from the USB host before passing along unhandled control requests to the library for processing
- *  internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	uint8_t* ReportData;
-	uint8_t  ReportSize;
-
-	/* Handle HID Class specific requests */
-	switch (USB_ControlRequest.bRequest)
-	{
-		case HID_REQ_GetReport:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-
-				/* Determine if it is the mouse or the keyboard data that is being requested */
-				if (!(USB_ControlRequest.wIndex))
-				{
-					ReportData = (uint8_t*)&KeyboardReportData;
-					ReportSize = sizeof(KeyboardReportData);
-				}
-				else
-				{
-					ReportData = (uint8_t*)&MouseReportData;
-					ReportSize = sizeof(MouseReportData);
-				}
-
-				/* Write the report data to the control endpoint */
-				Endpoint_Write_Control_Stream_LE(ReportData, ReportSize);
-				Endpoint_ClearOUT();
-
-				/* Clear the report data afterwards */
-				memset(ReportData, 0, ReportSize);
-			}
-
-			break;
-		case HID_REQ_SetReport:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-
-				/* Wait until the LED report has been sent by the host */
-				while (!(Endpoint_IsOUTReceived()))
-				{
-					if (USB_DeviceState == DEVICE_STATE_Unattached)
-					  return;
-				}
-
-				/* Read in the LED report from the host */
-				uint8_t LEDStatus = Endpoint_Read_8();
-
-				Endpoint_ClearOUT();
-				Endpoint_ClearStatusStage();
-
-				/* Process the incoming LED report */
-				Keyboard_ProcessLEDReport(LEDStatus);
-			}
-
-			break;
-	}
-}
-
-/** Processes a given Keyboard LED report from the host, and sets the board LEDs to match. Since the Keyboard
- *  LED report can be sent through either the control endpoint (via a HID SetReport request) or the HID OUT
- *  endpoint, the processing code is placed here to avoid duplicating it and potentially having different
- *  behavior depending on the method used to sent it.
- */
-void Keyboard_ProcessLEDReport(const uint8_t LEDStatus)
-{
-	uint8_t LEDMask = LEDS_LED2;
-
-	if (LEDStatus & HID_KEYBOARD_LED_NUMLOCK)
-	  LEDMask |= LEDS_LED1;
-
-	if (LEDStatus & HID_KEYBOARD_LED_CAPSLOCK)
-	  LEDMask |= LEDS_LED3;
-
-	if (LEDStatus & HID_KEYBOARD_LED_SCROLLLOCK)
-	  LEDMask |= LEDS_LED4;
-
-	/* Set the status LEDs to the current Keyboard LED status */
-	LEDs_SetAllLEDs(LEDMask);
-}
-
-/** Keyboard task. This generates the next keyboard HID report for the host, and transmits it via the
- *  keyboard IN endpoint when the host is ready for more data. Additionally, it processes host LED status
- *  reports sent to the device via the keyboard OUT reporting endpoint.
- */
-void Keyboard_HID_Task(void)
-{
-	uint8_t JoyStatus_LCL = Joystick_GetStatus();
-
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	/* Check if board button is not pressed, if so mouse mode enabled */
-	if (!(Buttons_GetStatus() & BUTTONS_BUTTON1))
-	{
-		/* Make sent key uppercase by indicating that the left shift key is pressed */
-		KeyboardReportData.Modifier = HID_KEYBOARD_MODIFIER_LEFTSHIFT;
-
-		if (JoyStatus_LCL & JOY_UP)
-		  KeyboardReportData.KeyCode[0] = HID_KEYBOARD_SC_A;
-		else if (JoyStatus_LCL & JOY_DOWN)
-		  KeyboardReportData.KeyCode[0] = HID_KEYBOARD_SC_B;
-
-		if (JoyStatus_LCL & JOY_LEFT)
-		  KeyboardReportData.KeyCode[0] = HID_KEYBOARD_SC_C;
-		else if (JoyStatus_LCL & JOY_RIGHT)
-		  KeyboardReportData.KeyCode[0] = HID_KEYBOARD_SC_D;
-
-		if (JoyStatus_LCL & JOY_PRESS)
-		  KeyboardReportData.KeyCode[0] = HID_KEYBOARD_SC_E;
-	}
-
-	/* Select the Keyboard Report Endpoint */
-	Endpoint_SelectEndpoint(KEYBOARD_IN_EPADDR);
-
-	/* Check if Keyboard Endpoint Ready for Read/Write */
-	if (Endpoint_IsReadWriteAllowed())
-	{
-		/* Write Keyboard Report Data */
-		Endpoint_Write_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData), NULL);
-
-		/* Finalize the stream transfer to send the last packet */
-		Endpoint_ClearIN();
-
-		/* Clear the report data afterwards */
-		memset(&KeyboardReportData, 0, sizeof(KeyboardReportData));
-	}
-
-	/* Select the Keyboard LED Report Endpoint */
-	Endpoint_SelectEndpoint(KEYBOARD_OUT_EPADDR);
-
-	/* Check if Keyboard LED Endpoint Ready for Read/Write */
-	if (Endpoint_IsReadWriteAllowed())
-	{
-		/* Read in and process the LED report from the host */
-		Keyboard_ProcessLEDReport(Endpoint_Read_8());
-
-		/* Handshake the OUT Endpoint - clear endpoint and ready for next report */
-		Endpoint_ClearOUT();
-	}
-}
-
-/** Mouse task. This generates the next mouse HID report for the host, and transmits it via the
- *  mouse IN endpoint when the host is ready for more data.
- */
-void Mouse_HID_Task(void)
-{
-	uint8_t JoyStatus_LCL = Joystick_GetStatus();
-
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	/* Check if board button is pressed, if so mouse mode enabled */
-	if (Buttons_GetStatus() & BUTTONS_BUTTON1)
-	{
-		if (JoyStatus_LCL & JOY_UP)
-		  MouseReportData.Y =  1;
-		else if (JoyStatus_LCL & JOY_DOWN)
-		  MouseReportData.Y = -1;
-
-		if (JoyStatus_LCL & JOY_RIGHT)
-		  MouseReportData.X =  1;
-		else if (JoyStatus_LCL & JOY_LEFT)
-		  MouseReportData.X = -1;
-
-		if (JoyStatus_LCL & JOY_PRESS)
-		  MouseReportData.Button |= (1 << 0);
-	}
-
-	/* Select the Mouse Report Endpoint */
-	Endpoint_SelectEndpoint(MOUSE_IN_EPADDR);
-
-	/* Check if Mouse Endpoint Ready for Read/Write */
-	if (Endpoint_IsReadWriteAllowed())
-	{
-		/* Write Mouse Report Data */
-		Endpoint_Write_Stream_LE(&MouseReportData, sizeof(MouseReportData), NULL);
-
-		/* Finalize the stream transfer to send the last packet */
-		Endpoint_ClearIN();
-
-		/* Clear the report data afterwards */
-		memset(&MouseReportData, 0, sizeof(MouseReportData));
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h
deleted file mode 100644
index d83ab7c710..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-#ifndef _KEYBOARD_MOUSE_H_
-#define _KEYBOARD_MOUSE_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY        LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING     (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY           (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR           (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void Keyboard_ProcessLEDReport(const uint8_t LEDStatus);
-		void Keyboard_HID_Task(void);
-		void Mouse_HID_Task(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt
deleted file mode 100644
index 20c89cc80c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Dual HID Keyboard and Mouse Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Keyboard/Mouse demonstration application. This gives a simple reference
- *  application for implementing a composite device containing both USB Keyboard
- *  and USB Mouse functionality using the basic USB HID drivers in all modern OSes
- *  (i.e. no special drivers required). This example uses two separate HID
- *  interfaces for each function. It is boot protocol compatible, and thus works under
- *  compatible BIOS as if it was a native keyboard and mouse (e.g. PS/2).
- *
- *  On start-up the system will automatically enumerate and function
- *  as a keyboard when the USB connection to a host is present and the HWB is not
- *  pressed. When enabled, manipulate the joystick to send the letters
- *  a, b, c, d and e. See the USB HID documentation for more information
- *  on sending keyboard event and key presses.
- *
- *  When the HWB is pressed, the mouse mode is enabled. When enabled, move the
- *  joystick to move the pointer, and push the joystick inwards to simulate a
- *  left-button click.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/asf.xml
deleted file mode 100644
index d44bb8043a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/asf.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.avr8">

-		<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.xmega">

-		<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.lowlevel.keyboard_mouse" caption="Keyboard and Mouse HID Device Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a pair of HID interfaces. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="KeyboardMouse.txt"/>

-

-		<build type="c-source" value="KeyboardMouse.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="KeyboardMouse.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.joystick"/>

-		<require idref="lufa.drivers.board.buttons"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/doxyfile
deleted file mode 100644
index 7428ae1cf9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Combined Keyboard/Mouse Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/makefile
deleted file mode 100644
index 88539ac9f5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/KeyboardMouse/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = KeyboardMouse
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/Config/LUFAConfig.h
deleted file mode 100644
index a06b60275c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               2
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/Descriptors.c
deleted file mode 100644
index f7138ca59c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/Descriptors.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2048,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces          = 2,
-
-			.ConfigurationNumber      = 1,
-			.ConfigurationStrIndex    = NO_DESCRIPTOR,
-
-			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
-		},
-
-	.Audio_ControlInterface =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioControl,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 0,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_ControlSubclass,
-			.Protocol                 = AUDIO_CSCP_ControlProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_ControlInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
-
-			.ACSpecification          = VERSION_BCD(1,0,0),
-			.TotalLength              = sizeof(USB_Audio_Descriptor_Interface_AC_t),
-
-			.InCollection             = 1,
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-		},
-
-	.Audio_StreamInterface =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 2,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_MIDIStreamingSubclass,
-			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_AudioInterface_AS_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
-
-			.AudioSpecification       = VERSION_BCD(1,0,0),
-
-			.TotalLength              = (sizeof(USB_Descriptor_Configuration_t) -
-			                             offsetof(USB_Descriptor_Configuration_t, Audio_StreamInterface_SPC))
-		},
-
-	.MIDI_In_Jack_Emb =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_Embedded,
-			.JackID                   = 0x01,
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_In_Jack_Ext =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_External,
-			.JackID                   = 0x02,
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_Out_Jack_Emb =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_Embedded,
-			.JackID                   = 0x03,
-
-			.NumberOfPins             = 1,
-			.SourceJackID             = {0x02},
-			.SourcePinID              = {0x01},
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_Out_Jack_Ext =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_External,
-			.JackID                   = 0x04,
-
-			.NumberOfPins             = 1,
-			.SourceJackID             = {0x01},
-			.SourcePinID              = {0x01},
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_In_Jack_Endpoint =
-		{
-			.Endpoint =
-				{
-					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
-
-					.EndpointAddress     = MIDI_STREAM_OUT_EPADDR,
-					.Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-					.EndpointSize        = MIDI_STREAM_EPSIZE,
-					.PollingIntervalMS   = 0x05
-				},
-
-			.Refresh                  = 0,
-			.SyncEndpointNumber       = 0
-		},
-
-	.MIDI_In_Jack_Endpoint_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint},
-			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
-
-			.TotalEmbeddedJacks       = 0x01,
-			.AssociatedJackID         = {0x01}
-		},
-
-	.MIDI_Out_Jack_Endpoint =
-		{
-			.Endpoint =
-				{
-					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
-
-					.EndpointAddress     = MIDI_STREAM_IN_EPADDR,
-					.Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-					.EndpointSize        = MIDI_STREAM_EPSIZE,
-					.PollingIntervalMS   = 0x05
-				},
-
-			.Refresh                  = 0,
-			.SyncEndpointNumber       = 0
-		},
-
-	.MIDI_Out_Jack_Endpoint_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint},
-			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
-
-			.TotalEmbeddedJacks       = 0x01,
-			.AssociatedJackID         = {0x03}
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA MIDI Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/Descriptors.h
deleted file mode 100644
index 10bc434170..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/Descriptors.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-	/* Macros: */
-		/** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */
-		#define MIDI_STREAM_IN_EPADDR       (ENDPOINT_DIR_IN  | 1)
-
-		/** Endpoint address of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */
-		#define MIDI_STREAM_OUT_EPADDR      (ENDPOINT_DIR_OUT | 2)
-
-		/** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */
-		#define MIDI_STREAM_EPSIZE          64
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t     Config;
-
-			// MIDI Audio Control Interface
-			USB_Descriptor_Interface_t                Audio_ControlInterface;
-			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
-
-			// MIDI Audio Streaming Interface
-			USB_Descriptor_Interface_t                Audio_StreamInterface;
-			USB_MIDI_Descriptor_AudioInterface_AS_t   Audio_StreamInterface_SPC;
-			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Emb;
-			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Ext;
-			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Emb;
-			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Ext;
-			USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_In_Jack_Endpoint;
-			USB_MIDI_Descriptor_Jack_Endpoint_t       MIDI_In_Jack_Endpoint_SPC;
-			USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_Out_Jack_Endpoint;
-			USB_MIDI_Descriptor_Jack_Endpoint_t       MIDI_Out_Jack_Endpoint_SPC;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
-			INTERFACE_ID_AudioStream  = 1, /**< Audio stream interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/MIDI.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/MIDI.c
deleted file mode 100644
index 9208b0cdc0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/MIDI.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MIDI input demo. This file contains the main tasks of the demo and
- *  is responsible for the initial application hardware configuration.
- */
-
-#include "MIDI.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		MIDI_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	Buttons_Init();
-	USB_Init();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
-void EVENT_USB_Device_Connect(void)
-{
-	/* Indicate USB enumerating */
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs, disables the sample update and PWM output timers and stops the USB and MIDI management tasks.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Indicate USB not ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
- *  of the USB device after enumeration - the device endpoints are configured and the MIDI management task started.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup MIDI Data Endpoints */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_IN_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, 1);
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Task to handle the generation of MIDI note change events in response to presses of the board joystick, and send them
- *  to the host.
- */
-void MIDI_Task(void)
-{
-	static uint8_t PrevJoystickStatus;
-
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPADDR);
-
-	if (Endpoint_IsINReady())
-	{
-		uint8_t MIDICommand = 0;
-		uint8_t MIDIPitch;
-
-		uint8_t JoystickStatus  = Joystick_GetStatus();
-		uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);
-
-		/* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */
-		uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1));
-
-		if (JoystickChanges & JOY_LEFT)
-		{
-			MIDICommand = ((JoystickStatus & JOY_LEFT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-			MIDIPitch   = 0x3C;
-		}
-
-		if (JoystickChanges & JOY_UP)
-		{
-			MIDICommand = ((JoystickStatus & JOY_UP)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-			MIDIPitch   = 0x3D;
-		}
-
-		if (JoystickChanges & JOY_RIGHT)
-		{
-			MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-			MIDIPitch   = 0x3E;
-		}
-
-		if (JoystickChanges & JOY_DOWN)
-		{
-			MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-			MIDIPitch   = 0x3F;
-		}
-
-		if (JoystickChanges & JOY_PRESS)
-		{
-			MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-			MIDIPitch   = 0x3B;
-		}
-
-		/* Check if a MIDI command is to be sent */
-		if (MIDICommand)
-		{
-			MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
-				{
-					.Event       = MIDI_EVENT(0, MIDICommand),
-
-					.Data1       = MIDICommand | Channel,
-					.Data2       = MIDIPitch,
-					.Data3       = MIDI_STANDARD_VELOCITY,
-				};
-
-			/* Write the MIDI event packet to the endpoint */
-			Endpoint_Write_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
-
-			/* Send the data in the endpoint to the host */
-			Endpoint_ClearIN();
-		}
-
-		/* Save previous joystick value for next joystick change detection */
-		PrevJoystickStatus = JoystickStatus;
-	}
-
-	/* Select the MIDI OUT stream */
-	Endpoint_SelectEndpoint(MIDI_STREAM_OUT_EPADDR);
-
-	/* Check if a MIDI command has been received */
-	if (Endpoint_IsOUTReceived())
-	{
-		MIDI_EventPacket_t MIDIEvent;
-
-		/* Read the MIDI event packet from the endpoint */
-		Endpoint_Read_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
-
-		/* Check to see if the sent command is a note on message with a non-zero velocity */
-		if ((MIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)) && (MIDIEvent.Data3 > 0))
-		{
-			/* Change LEDs depending on the pitch of the sent note */
-			LEDs_SetAllLEDs(MIDIEvent.Data2 > 64 ? LEDS_LED1 : LEDS_LED2);
-		}
-		else
-		{
-			/* Turn off all LEDs in response to non Note On messages */
-			LEDs_SetAllLEDs(LEDS_NO_LEDS);
-		}
-
-		/* If the endpoint is now empty, clear the bank */
-		if (!(Endpoint_BytesInEndpoint()))
-		{
-			/* Clear the endpoint ready for new packet */
-			Endpoint_ClearOUT();
-		}
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/MIDI.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/MIDI.h
deleted file mode 100644
index cfaefd6312..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/MIDI.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for AudioOutput.c.
- */
-
-#ifndef _AUDIO_OUTPUT_H_
-#define _AUDIO_OUTPUT_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Platform/Platform.h>
-
-   /* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-   /* Function Prototypes: */
-		void SetupHardware(void);
-		void MIDI_Task(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/MIDI.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/MIDI.txt
deleted file mode 100644
index c076be3bc1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/MIDI.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage MIDI Input Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Standard Audio Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Audio Class Specification \n
- *        USB-MIDI Audio Class Extension Specification \n
- *        General MIDI Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  MIDI demonstration application. This gives a simple reference
- *  application for implementing the USB-MIDI class in USB devices.
- *  It is built upon the USB Audio class.
- *
- *  Joystick movements are translated into note on/off messages and
- *  are sent to the host PC as MIDI streams which can be read by any
- *  MIDI program supporting MIDI IN devices.
- *
- *  If the HWB is not pressed, channel 1 (default piano) is used. If
- *  the HWB is pressed, then channel 10 (default percussion) is selected.
- *
- *  This device implements MIDI-THRU mode, with the IN MIDI data being
- *  generated by the device itself. OUT MIDI data is discarded.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/asf.xml
deleted file mode 100644
index 477b7d749e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/asf.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.avr8">

-		<require idref="lufa.demos.device.lowlevel.midi"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.xmega">

-		<require idref="lufa.demos.device.lowlevel.midi"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.lowlevel.midi" caption="MIDI Device Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		MIDI device demo, implementing a basic USB MIDI device that can send messages to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="MIDI Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MIDI.txt"/>

-

-		<build type="c-source" value="MIDI.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="MIDI.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-		<require idref="lufa.drivers.board.joystick"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/doxyfile
deleted file mode 100644
index b7b1862f74..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - MIDI Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/makefile
deleted file mode 100644
index aeeb870b8a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MIDI/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MIDI
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Config/AppConfig.h
deleted file mode 100644
index 4be9d2b6b1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Config/AppConfig.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define TOTAL_LUNS                1
-
-	#define DISK_READ_ONLY            false
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h
deleted file mode 100644
index 3c3b68bb1a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               4
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Descriptors.c
deleted file mode 100644
index 598155a45a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Descriptors.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2045,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = USB_CONFIG_ATTR_RESERVED,
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.MS_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_MassStorage,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = MS_CSCP_MassStorageClass,
-			.SubClass               = MS_CSCP_SCSITransparentSubclass,
-			.Protocol               = MS_CSCP_BulkOnlyTransportProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.MS_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MASS_STORAGE_IN_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.MS_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MASS_STORAGE_OUT_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mass Storage Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Descriptors.h
deleted file mode 100644
index 14b131d5e7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Descriptors.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
-		#define MASS_STORAGE_IN_EPADDR         (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */
-		#define MASS_STORAGE_OUT_EPADDR        (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the Mass Storage data endpoints. */
-		#define MASS_STORAGE_IO_EPSIZE         64
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Mass Storage Interface
-			USB_Descriptor_Interface_t            MS_Interface;
-			USB_Descriptor_Endpoint_t             MS_DataInEndpoint;
-			USB_Descriptor_Endpoint_t             MS_DataOutEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_MassStorage = 0, /**< Mass storage interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c
deleted file mode 100644
index 41be814001..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c
+++ /dev/null
@@ -1,530 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Functions to manage the physical Dataflash media, including reading and writing of
- *  blocks of data. These functions are called by the SCSI layer when data must be stored
- *  or retrieved to/from the physical storage media. If a different media is used (such
- *  as a SD card or EEPROM), functions similar to these will need to be generated.
- */
-
-#define  INCLUDE_FROM_DATAFLASHMANAGER_C
-#include "DataflashManager.h"
-
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
- *  the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes
- *  them to the Dataflash in Dataflash page sized blocks.
- *
- *  \param[in] BlockAddress  Data block starting address for the write sequence
- *  \param[in] TotalBlocks   Number of blocks of data to write
- */
-void DataflashManager_WriteBlocks(const uint32_t BlockAddress,
-                                  uint16_t TotalBlocks)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-	bool     UsingSecondBuffer   = false;
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the Dataflash buffer */
-	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
-	Dataflash_SendAddressBytes(CurrDFPage, 0);
-	Dataflash_WaitWhileBusy();
-#endif
-
-	/* Send the Dataflash buffer write command */
-	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
-	Dataflash_SendAddressBytes(0, CurrDFPageByte);
-
-	/* Wait until endpoint is ready before continuing */
-	if (Endpoint_WaitUntilReady())
-	  return;
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if the endpoint is currently empty */
-			if (!(Endpoint_IsReadWriteAllowed()))
-			{
-				/* Clear the current endpoint bank */
-				Endpoint_ClearOUT();
-
-				/* Wait until the host has sent another packet */
-				if (Endpoint_WaitUntilReady())
-				  return;
-			}
-
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Write the Dataflash buffer contents back to the Dataflash page */
-				Dataflash_WaitWhileBusy();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
-				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
-				  UsingSecondBuffer = !(UsingSecondBuffer);
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
-				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
-				{
-					/* Copy selected dataflash's current page contents to the Dataflash buffer */
-					Dataflash_WaitWhileBusy();
-					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
-					Dataflash_SendAddressBytes(CurrDFPage, 0);
-					Dataflash_WaitWhileBusy();
-				}
-#endif
-
-				/* Send the Dataflash buffer write command */
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
-				Dataflash_SendAddressBytes(0, 0);
-			}
-
-			/* Write one 16-byte chunk of data to the Dataflash */
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-
-			/* Check if the current command is being aborted by the host */
-			if (IsMassStoreReset)
-			  return;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Write the Dataflash buffer contents back to the Dataflash page */
-	Dataflash_WaitWhileBusy();
-	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
-	Dataflash_WaitWhileBusy();
-
-	/* If the endpoint is empty, clear it ready for the next packet from the host */
-	if (!(Endpoint_IsReadWriteAllowed()))
-	  Endpoint_ClearOUT();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
- *  the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash
- *  and writes them in OS sized blocks to the endpoint.
- *
- *  \param[in] BlockAddress  Data block starting address for the read sequence
- *  \param[in] TotalBlocks   Number of blocks of data to read
- */
-void DataflashManager_ReadBlocks(const uint32_t BlockAddress,
-                                 uint16_t TotalBlocks)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-	/* Send the Dataflash main memory page read command */
-	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-
-	/* Wait until endpoint is ready before continuing */
-	if (Endpoint_WaitUntilReady())
-	  return;
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if the endpoint is currently full */
-			if (!(Endpoint_IsReadWriteAllowed()))
-			{
-				/* Clear the endpoint bank to send its contents to the host */
-				Endpoint_ClearIN();
-
-				/* Wait until the endpoint is ready for more data */
-				if (Endpoint_WaitUntilReady())
-				  return;
-			}
-
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-				/* Send the Dataflash main memory page read command */
-				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-			}
-
-			/* Read one 16-byte chunk of data from the Dataflash */
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-
-			/* Check if the current command is being aborted by the host */
-			if (IsMassStoreReset)
-			  return;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* If the endpoint is full, send its contents to the host */
-	if (!(Endpoint_IsReadWriteAllowed()))
-	  Endpoint_ClearIN();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
- *  the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the
- *  Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
- *  Dataflash.
- *
- *  \param[in] BlockAddress  Data block starting address for the write sequence
- *  \param[in] TotalBlocks   Number of blocks of data to write
- *  \param[in] BufferPtr     Pointer to the data source RAM buffer
- */
-void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
-                                      uint16_t TotalBlocks,
-                                      uint8_t* BufferPtr)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-	bool     UsingSecondBuffer   = false;
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the Dataflash buffer */
-	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
-	Dataflash_SendAddressBytes(CurrDFPage, 0);
-	Dataflash_WaitWhileBusy();
-#endif
-
-	/* Send the Dataflash buffer write command */
-	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
-	Dataflash_SendAddressBytes(0, CurrDFPageByte);
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Write the Dataflash buffer contents back to the Dataflash page */
-				Dataflash_WaitWhileBusy();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
-				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
-				  UsingSecondBuffer = !(UsingSecondBuffer);
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
-				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
-				{
-					/* Copy selected dataflash's current page contents to the Dataflash buffer */
-					Dataflash_WaitWhileBusy();
-					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
-					Dataflash_SendAddressBytes(CurrDFPage, 0);
-					Dataflash_WaitWhileBusy();
-				}
-#endif
-
-				/* Send the Dataflash buffer write command */
-				Dataflash_ToggleSelectedChipCS();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
-				Dataflash_SendAddressBytes(0, 0);
-			}
-
-			/* Write one 16-byte chunk of data to the Dataflash */
-			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
-			  Dataflash_SendByte(*(BufferPtr++));
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Write the Dataflash buffer contents back to the Dataflash page */
-	Dataflash_WaitWhileBusy();
-	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
-	Dataflash_WaitWhileBusy();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
- *  the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash
- *  and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read
- *  the files stored on the Dataflash.
- *
- *  \param[in] BlockAddress  Data block starting address for the read sequence
- *  \param[in] TotalBlocks   Number of blocks of data to read
- *  \param[out] BufferPtr    Pointer to the data destination RAM buffer
- */
-void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
-                                     uint16_t TotalBlocks,
-                                     uint8_t* BufferPtr)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-	/* Send the Dataflash main memory page read command */
-	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-				/* Send the Dataflash main memory page read command */
-				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-			}
-
-			/* Read one 16-byte chunk of data from the Dataflash */
-			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
-			  *(BufferPtr++) = Dataflash_ReceiveByte();
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
-void DataflashManager_ResetDataflashProtections(void)
-{
-	/* Select first Dataflash chip, send the read status register command */
-	Dataflash_SelectChip(DATAFLASH_CHIP1);
-	Dataflash_SendByte(DF_CMD_GETSTATUS);
-
-	/* Check if sector protection is enabled */
-	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
-	{
-		Dataflash_ToggleSelectedChipCS();
-
-		/* Send the commands to disable sector protection */
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
-	}
-
-	/* Select second Dataflash chip (if present on selected board), send read status register command */
-	#if (DATAFLASH_TOTALCHIPS == 2)
-	Dataflash_SelectChip(DATAFLASH_CHIP2);
-	Dataflash_SendByte(DF_CMD_GETSTATUS);
-
-	/* Check if sector protection is enabled */
-	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
-	{
-		Dataflash_ToggleSelectedChipCS();
-
-		/* Send the commands to disable sector protection */
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
-	}
-	#endif
-
-	/* Deselect current Dataflash chip */
-	Dataflash_DeselectChip();
-}
-
-/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working.
- *
- *  \return Boolean \c true if all media chips are working, \c false otherwise
- */
-bool DataflashManager_CheckDataflashOperation(void)
-{
-	uint8_t ReturnByte;
-
-	/* Test first Dataflash IC is present and responding to commands */
-	Dataflash_SelectChip(DATAFLASH_CHIP1);
-	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
-	ReturnByte = Dataflash_ReceiveByte();
-	Dataflash_DeselectChip();
-
-	/* If returned data is invalid, fail the command */
-	if (ReturnByte != DF_MANUFACTURER_ATMEL)
-	  return false;
-
-	#if (DATAFLASH_TOTALCHIPS == 2)
-	/* Test second Dataflash IC is present and responding to commands */
-	Dataflash_SelectChip(DATAFLASH_CHIP2);
-	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
-	ReturnByte = Dataflash_ReceiveByte();
-	Dataflash_DeselectChip();
-
-	/* If returned data is invalid, fail the command */
-	if (ReturnByte != DF_MANUFACTURER_ATMEL)
-	  return false;
-	#endif
-
-	return true;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h
deleted file mode 100644
index 3ad79b3bc9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DataflashManager.c.
- */
-
-#ifndef _DATAFLASH_MANAGER_H_
-#define _DATAFLASH_MANAGER_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-
-		#include "../MassStorage.h"
-		#include "../Descriptors.h"
-
-		#include <LUFA/Common/Common.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/Dataflash.h>
-
-	/* Preprocessor Checks: */
-		#if (DATAFLASH_PAGE_SIZE % 16)
-			#error Dataflash page size must be a multiple of 16 bytes.
-		#endif
-
-	/* Defines: */
-		/** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */
-		#define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
-
-		/** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
-		 *  storage media (Dataflash) using a different native block size. Do not change this value.
-		 */
-		#define VIRTUAL_MEMORY_BLOCK_SIZE           512
-
-		/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not
-		 *  change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size.
-		 */
-		#define VIRTUAL_MEMORY_BLOCKS               (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
-
-		/** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */
-		#define LUN_MEDIA_BLOCKS                    (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS)
-
-	/* Function Prototypes: */
-		void DataflashManager_WriteBlocks(const uint32_t BlockAddress,
-		                                  uint16_t TotalBlocks);
-		void DataflashManager_ReadBlocks(const uint32_t BlockAddress,
-		                                 uint16_t TotalBlocks);
-		void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
-		                                      uint16_t TotalBlocks,
-		                                      uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
-		void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
-		                                     uint16_t TotalBlocks,
-		                                     uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
-		void DataflashManager_ResetDataflashProtections(void);
-		bool DataflashManager_CheckDataflashOperation(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c
deleted file mode 100644
index 81347fef7b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  SCSI command processing routines, for SCSI commands issued by the host. Mass Storage
- *  devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information,
- *  which wrap around standard SCSI device commands for controlling the actual storage medium.
- */
-
-#define  INCLUDE_FROM_SCSI_C
-#include "SCSI.h"
-
-/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
- *  features and capabilities.
- */
-static const SCSI_Inquiry_Response_t InquiryData =
-	{
-		.DeviceType          = DEVICE_TYPE_BLOCK,
-		.PeripheralQualifier = 0,
-
-		.Removable           = true,
-
-		.Version             = 0,
-
-		.ResponseDataFormat  = 2,
-		.NormACA             = false,
-		.TrmTsk              = false,
-		.AERC                = false,
-
-		.AdditionalLength    = 0x1F,
-
-		.SoftReset           = false,
-		.CmdQue              = false,
-		.Linked              = false,
-		.Sync                = false,
-		.WideBus16Bit        = false,
-		.WideBus32Bit        = false,
-		.RelAddr             = false,
-
-		.VendorID            = "LUFA",
-		.ProductID           = "Dataflash Disk",
-		.RevisionID          = {'0','.','0','0'},
-	};
-
-/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE
- *  command is issued. This gives information on exactly why the last command failed to complete.
- */
-static SCSI_Request_Sense_Response_t SenseData =
-	{
-		.ResponseCode        = 0x70,
-		.AdditionalLength    = 0x0A,
-	};
-
-
-/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches
- *  to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns
- *  a command failure due to a ILLEGAL REQUEST.
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise
- */
-bool SCSI_DecodeSCSICommand(void)
-{
-	bool CommandSuccess = false;
-
-	/* Run the appropriate SCSI command hander function based on the passed command */
-	switch (CommandBlock.SCSICommandData[0])
-	{
-		case SCSI_CMD_INQUIRY:
-			CommandSuccess = SCSI_Command_Inquiry();
-			break;
-		case SCSI_CMD_REQUEST_SENSE:
-			CommandSuccess = SCSI_Command_Request_Sense();
-			break;
-		case SCSI_CMD_READ_CAPACITY_10:
-			CommandSuccess = SCSI_Command_Read_Capacity_10();
-			break;
-		case SCSI_CMD_SEND_DIAGNOSTIC:
-			CommandSuccess = SCSI_Command_Send_Diagnostic();
-			break;
-		case SCSI_CMD_WRITE_10:
-			CommandSuccess = SCSI_Command_ReadWrite_10(DATA_WRITE);
-			break;
-		case SCSI_CMD_READ_10:
-			CommandSuccess = SCSI_Command_ReadWrite_10(DATA_READ);
-			break;
-		case SCSI_CMD_MODE_SENSE_6:
-			CommandSuccess = SCSI_Command_ModeSense_6();
-			break;
-		case SCSI_CMD_START_STOP_UNIT:
-		case SCSI_CMD_TEST_UNIT_READY:
-		case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-		case SCSI_CMD_VERIFY_10:
-			/* These commands should just succeed, no handling required */
-			CommandSuccess = true;
-			CommandBlock.DataTransferLength = 0;
-			break;
-		default:
-			/* Update the SENSE key to reflect the invalid command */
-			SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		                   SCSI_ASENSE_INVALID_COMMAND,
-		                   SCSI_ASENSEQ_NO_QUALIFIER);
-			break;
-	}
-
-	/* Check if command was successfully processed */
-	if (CommandSuccess)
-	{
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD,
-		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return true;
-	}
-
-	return false;
-}
-
-/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features
- *  and capabilities to the host.
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Inquiry(void)
-{
-	uint16_t AllocationLength  = SwapEndian_16(*(uint16_t*)&CommandBlock.SCSICommandData[3]);
-	uint16_t BytesTransferred  = MIN(AllocationLength, sizeof(InquiryData));
-
-	/* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */
-	if ((CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||
-	     CommandBlock.SCSICommandData[2])
-	{
-		/* Optional but unsupported bits set - update the SENSE key and fail the request */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Write the INQUIRY data to the endpoint */
-	Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL);
-
-	/* Pad out remaining bytes with 0x00 */
-	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
-
-	/* Finalize the stream transfer to send the last packet */
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	CommandBlock.DataTransferLength -= BytesTransferred;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command,
- *  including the error code and additional error information so that the host can determine why a command failed to complete.
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Request_Sense(void)
-{
-	uint8_t  AllocationLength = CommandBlock.SCSICommandData[4];
-	uint8_t  BytesTransferred = MIN(AllocationLength, sizeof(SenseData));
-
-	/* Send the SENSE data - this indicates to the host the status of the last command */
-	Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL);
-
-	/* Pad out remaining bytes with 0x00 */
-	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
-
-	/* Finalize the stream transfer to send the last packet */
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	CommandBlock.DataTransferLength -= BytesTransferred;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity
- *  on the selected Logical Unit (drive), as a number of OS-sized blocks.
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Read_Capacity_10(void)
-{
-	/* Send the total number of logical blocks in the current LUN */
-	Endpoint_Write_32_BE(LUN_MEDIA_BLOCKS - 1);
-
-	/* Send the logical block size of the device (must be 512 bytes) */
-	Endpoint_Write_32_BE(VIRTUAL_MEMORY_BLOCK_SIZE);
-
-	/* Check if the current command is being aborted by the host */
-	if (IsMassStoreReset)
-	  return false;
-
-	/* Send the endpoint data packet to the host */
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	CommandBlock.DataTransferLength -= 8;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the
- *  board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is
- *  supported.
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Send_Diagnostic(void)
-{
-	/* Check to see if the SELF TEST bit is not set */
-	if (!(CommandBlock.SCSICommandData[1] & (1 << 2)))
-	{
-		/* Only self-test supported - update SENSE key and fail the command */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Check to see if all attached Dataflash ICs are functional */
-	if (!(DataflashManager_CheckDataflashOperation()))
-	{
-		/* Update SENSE key with a hardware error condition and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR,
-		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Succeed the command and update the bytes transferred counter */
-	CommandBlock.DataTransferLength = 0;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address
- *  and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual
- *  reading and writing of the data.
- *
- *  \param[in] IsDataRead  Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_ReadWrite_10(const bool IsDataRead)
-{
-	uint32_t BlockAddress;
-	uint16_t TotalBlocks;
-
-	/* Check if the disk is write protected or not */
-	if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY)
-	{
-		/* Block address is invalid, update SENSE key and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT,
-		               SCSI_ASENSE_WRITE_PROTECTED,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	BlockAddress = SwapEndian_32(*(uint32_t*)&CommandBlock.SCSICommandData[2]);
-	TotalBlocks  = SwapEndian_16(*(uint16_t*)&CommandBlock.SCSICommandData[7]);
-
-	/* Check if the block address is outside the maximum allowable value for the LUN */
-	if (BlockAddress >= LUN_MEDIA_BLOCKS)
-	{
-		/* Block address is invalid, update SENSE key and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	#if (TOTAL_LUNS > 1)
-	/* Adjust the given block address to the real media address based on the selected LUN */
-	BlockAddress += ((uint32_t)CommandBlock.LUN * LUN_MEDIA_BLOCKS);
-	#endif
-
-	/* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
-	if (IsDataRead == DATA_READ)
-	  DataflashManager_ReadBlocks(BlockAddress, TotalBlocks);
-	else
-	  DataflashManager_WriteBlocks(BlockAddress, TotalBlocks);
-
-	/* Update the bytes transferred counter and succeed the command */
-	CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);
-
-	return true;
-}
-
-/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about
- *  the SCSI device, as well as the device's Write Protect status.
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_ModeSense_6(void)
-{
-	/* Send an empty header response with the Write Protect flag status */
-	Endpoint_Write_8(0x00);
-	Endpoint_Write_8(0x00);
-	Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00);
-	Endpoint_Write_8(0x00);
-	Endpoint_ClearIN();
-
-	/* Update the bytes transferred counter and succeed the command */
-	CommandBlock.DataTransferLength -= 4;
-
-	return true;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h
deleted file mode 100644
index 36553bd7b3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for SCSI.c.
- */
-
-#ifndef _SCSI_H_
-#define _SCSI_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Common/Common.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-
-		#include "../MassStorage.h"
-		#include "../Descriptors.h"
-		#include "DataflashManager.h"
-
-	/* Macros: */
-		/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
-		 *  is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
-		 *  the last command failure) in a quick and easy manner.
-		 *
-		 *  \param[in] Key    New SCSI sense key to set the sense code to
-		 *  \param[in] Acode  New SCSI additional sense key to set the additional sense code to
-		 *  \param[in] Aqual  New SCSI additional sense key qualifier to set the additional sense qualifier code to
-		 */
-		#define SCSI_SET_SENSE(Key, Acode, Aqual)  do { SenseData.SenseKey                 = (Key);   \
-		                                                SenseData.AdditionalSenseCode      = (Acode); \
-		                                                SenseData.AdditionalSenseQualifier = (Aqual); } while (0)
-
-		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */
-		#define DATA_READ           true
-
-		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */
-		#define DATA_WRITE          false
-
-		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */
-		#define DEVICE_TYPE_BLOCK   0x00
-
-		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */
-		#define DEVICE_TYPE_CDROM   0x05
-
-	/* Type Defines: */
-		/** Type define for a SCSI response structure to a SCSI INQUIRY command. For details of the
-		 *  structure contents, refer to the SCSI specifications.
-		 */
-		typedef struct
-		{
-			unsigned DeviceType          : 5;
-			unsigned PeripheralQualifier : 3;
-
-			unsigned Reserved            : 7;
-			unsigned Removable           : 1;
-
-			uint8_t  Version;
-
-			unsigned ResponseDataFormat  : 4;
-			unsigned Reserved2           : 1;
-			unsigned NormACA             : 1;
-			unsigned TrmTsk              : 1;
-			unsigned AERC                : 1;
-
-			uint8_t  AdditionalLength;
-			uint8_t  Reserved3[2];
-
-			unsigned SoftReset           : 1;
-			unsigned CmdQue              : 1;
-			unsigned Reserved4           : 1;
-			unsigned Linked              : 1;
-			unsigned Sync                : 1;
-			unsigned WideBus16Bit        : 1;
-			unsigned WideBus32Bit        : 1;
-			unsigned RelAddr             : 1;
-
-			uint8_t  VendorID[8];
-			uint8_t  ProductID[16];
-			uint8_t  RevisionID[4];
-		} MS_SCSI_Inquiry_Response_t;
-
-		/** Type define for a SCSI sense structure to a SCSI REQUEST SENSE command. For details of the
-		 *  structure contents, refer to the SCSI specifications.
-		 */
-		typedef struct
-		{
-			uint8_t  ResponseCode;
-
-			uint8_t  SegmentNumber;
-
-			unsigned SenseKey            : 4;
-			unsigned Reserved            : 1;
-			unsigned ILI                 : 1;
-			unsigned EOM                 : 1;
-			unsigned FileMark            : 1;
-
-			uint8_t  Information[4];
-			uint8_t  AdditionalLength;
-			uint8_t  CmdSpecificInformation[4];
-			uint8_t  AdditionalSenseCode;
-			uint8_t  AdditionalSenseQualifier;
-			uint8_t  FieldReplaceableUnitCode;
-			uint8_t  SenseKeySpecific[3];
-		} MS_SCSI_Request_Sense_Response_t;
-
-	/* Function Prototypes: */
-		bool SCSI_DecodeSCSICommand(void);
-
-		#if defined(INCLUDE_FROM_SCSI_C)
-			static bool SCSI_Command_Inquiry(void);
-			static bool SCSI_Command_Request_Sense(void);
-			static bool SCSI_Command_Read_Capacity_10(void);
-			static bool SCSI_Command_Send_Diagnostic(void);
-			static bool SCSI_Command_ReadWrite_10(const bool IsDataRead);
-			static bool SCSI_Command_ModeSense_6(void);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/MassStorage.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/MassStorage.c
deleted file mode 100644
index 4c274b92e1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/MassStorage.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the Mass Storage demo. This file contains the main tasks of the demo and
- *  is responsible for the initial application hardware configuration.
- */
-
-#define  INCLUDE_FROM_MASSSTORAGE_C
-#include "MassStorage.h"
-
-/** Structure to hold the latest Command Block Wrapper issued by the host, containing a SCSI command to execute. */
-MS_CommandBlockWrapper_t  CommandBlock;
-
-/** Structure to hold the latest Command Status Wrapper to return to the host, containing the status of the last issued command. */
-MS_CommandStatusWrapper_t CommandStatus = { .Signature = MS_CSW_SIGNATURE };
-
-/** Flag to asynchronously abort any in-progress data transfers upon the reception of a mass storage reset command. */
-volatile bool IsMassStoreReset = false;
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		MassStorage_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	Dataflash_Init();
-	USB_Init();
-
-	/* Check if the Dataflash is working, abort if not */
-	if (!(DataflashManager_CheckDataflashOperation()))
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		for(;;);
-	}
-
-	/* Clear Dataflash sector protections, if enabled */
-	DataflashManager_ResetDataflashProtections();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
-void EVENT_USB_Device_Connect(void)
-{
-	/* Indicate USB enumerating */
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	/* Reset the MSReset flag upon connection */
-	IsMassStoreReset = false;
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs and stops the Mass Storage management task.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Indicate USB not ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
- *  of the USB device after enumeration - the device endpoints are configured and the Mass Storage management task started.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup Mass Storage Data Endpoints */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_IN_EPADDR,  EP_TYPE_BULK, MASS_STORAGE_IO_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_OUT_EPADDR, EP_TYPE_BULK, MASS_STORAGE_IO_EPSIZE, 1);
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- *  the device from the USB host before passing along unhandled control requests to the library for processing
- *  internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	/* Process UFI specific control requests */
-	switch (USB_ControlRequest.bRequest)
-	{
-		case MS_REQ_MassStorageReset:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-				Endpoint_ClearStatusStage();
-
-				/* Indicate that the current transfer should be aborted */
-				IsMassStoreReset = true;
-			}
-
-			break;
-		case MS_REQ_GetMaxLUN:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-
-				/* Indicate to the host the number of supported LUNs (virtual disks) on the device */
-				Endpoint_Write_8(TOTAL_LUNS - 1);
-
-				Endpoint_ClearIN();
-				Endpoint_ClearStatusStage();
-			}
-
-			break;
-	}
-}
-
-/** Task to manage the Mass Storage interface, reading in Command Block Wrappers from the host, processing the SCSI commands they
- *  contain, and returning Command Status Wrappers back to the host to indicate the success or failure of the last issued command.
- */
-void MassStorage_Task(void)
-{
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	/* Process sent command block from the host if one has been sent */
-	if (ReadInCommandBlock())
-	{
-		/* Indicate busy */
-		LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-		/* Check direction of command, select Data IN endpoint if data is from the device */
-		if (CommandBlock.Flags & MS_COMMAND_DIR_DATA_IN)
-		  Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR);
-
-		/* Decode the received SCSI command, set returned status code */
-		CommandStatus.Status = SCSI_DecodeSCSICommand() ? MS_SCSI_COMMAND_Pass : MS_SCSI_COMMAND_Fail;
-
-		/* Load in the CBW tag into the CSW to link them together */
-		CommandStatus.Tag = CommandBlock.Tag;
-
-		/* Load in the data residue counter into the CSW */
-		CommandStatus.DataTransferResidue = CommandBlock.DataTransferLength;
-
-		/* Stall the selected data pipe if command failed (if data is still to be transferred) */
-		if ((CommandStatus.Status == MS_SCSI_COMMAND_Fail) && (CommandStatus.DataTransferResidue))
-		  Endpoint_StallTransaction();
-
-		/* Return command status block to the host */
-		ReturnCommandStatus();
-
-		/* Indicate ready */
-		LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	}
-
-	/* Check if a Mass Storage Reset occurred */
-	if (IsMassStoreReset)
-	{
-		/* Reset the data endpoint banks */
-		Endpoint_ResetEndpoint(MASS_STORAGE_OUT_EPADDR);
-		Endpoint_ResetEndpoint(MASS_STORAGE_IN_EPADDR);
-
-		Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR);
-		Endpoint_ClearStall();
-		Endpoint_ResetDataToggle();
-		Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR);
-		Endpoint_ClearStall();
-		Endpoint_ResetDataToggle();
-
-		/* Clear the abort transfer flag */
-		IsMassStoreReset = false;
-	}
-}
-
-/** Function to read in a command block from the host, via the bulk data OUT endpoint. This function reads in the next command block
- *  if one has been issued, and performs validation to ensure that the block command is valid.
- *
- *  \return Boolean \c true if a valid command block has been read in from the endpoint, \c false otherwise
- */
-static bool ReadInCommandBlock(void)
-{
-	uint16_t BytesTransferred;
-
-	/* Select the Data Out endpoint */
-	Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR);
-
-	/* Abort if no command has been sent from the host */
-	if (!(Endpoint_IsOUTReceived()))
-	  return false;
-
-	/* Read in command block header */
-	BytesTransferred = 0;
-	while (Endpoint_Read_Stream_LE(&CommandBlock, (sizeof(CommandBlock) - sizeof(CommandBlock.SCSICommandData)),
-	                               &BytesTransferred) == ENDPOINT_RWSTREAM_IncompleteTransfer)
-	{
-		/* Check if the current command is being aborted by the host */
-		if (IsMassStoreReset)
-		  return false;
-	}
-
-	/* Verify the command block - abort if invalid */
-	if ((CommandBlock.Signature         != MS_CBW_SIGNATURE) ||
-	    (CommandBlock.LUN               >= TOTAL_LUNS)       ||
-		(CommandBlock.Flags              & 0x1F)             ||
-		(CommandBlock.SCSICommandLength == 0)                ||
-		(CommandBlock.SCSICommandLength >  sizeof(CommandBlock.SCSICommandData)))
-	{
-		/* Stall both data pipes until reset by host */
-		Endpoint_StallTransaction();
-		Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR);
-		Endpoint_StallTransaction();
-
-		return false;
-	}
-
-	/* Read in command block command data */
-	BytesTransferred = 0;
-	while (Endpoint_Read_Stream_LE(&CommandBlock.SCSICommandData, CommandBlock.SCSICommandLength,
-	                               &BytesTransferred) == ENDPOINT_RWSTREAM_IncompleteTransfer)
-	{
-		/* Check if the current command is being aborted by the host */
-		if (IsMassStoreReset)
-		  return false;
-	}
-
-	/* Finalize the stream transfer to send the last packet */
-	Endpoint_ClearOUT();
-
-	return true;
-}
-
-/** Returns the filled Command Status Wrapper back to the host via the bulk data IN endpoint, waiting for the host to clear any
- *  stalled data endpoints as needed.
- */
-static void ReturnCommandStatus(void)
-{
-	uint16_t BytesTransferred;
-
-	/* Select the Data Out endpoint */
-	Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR);
-
-	/* While data pipe is stalled, wait until the host issues a control request to clear the stall */
-	while (Endpoint_IsStalled())
-	{
-		/* Check if the current command is being aborted by the host */
-		if (IsMassStoreReset)
-		  return;
-	}
-
-	/* Select the Data In endpoint */
-	Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR);
-
-	/* While data pipe is stalled, wait until the host issues a control request to clear the stall */
-	while (Endpoint_IsStalled())
-	{
-		/* Check if the current command is being aborted by the host */
-		if (IsMassStoreReset)
-		  return;
-	}
-
-	/* Write the CSW to the endpoint */
-	BytesTransferred = 0;
-	while (Endpoint_Write_Stream_LE(&CommandStatus, sizeof(CommandStatus),
-	                                &BytesTransferred) == ENDPOINT_RWSTREAM_IncompleteTransfer)
-	{
-		/* Check if the current command is being aborted by the host */
-		if (IsMassStoreReset)
-		  return;
-	}
-
-	/* Finalize the stream transfer to send the last packet */
-	Endpoint_ClearIN();
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/MassStorage.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/MassStorage.h
deleted file mode 100644
index cd2a715253..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/MassStorage.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MassStorage.c.
- */
-
-#ifndef _MASS_STORAGE_H_
-#define _MASS_STORAGE_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-
-		#include "Descriptors.h"
-
-		#include "Lib/SCSI.h"
-		#include "Lib/DataflashManager.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Dataflash.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY       LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING   (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY         (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR         (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY           LEDS_LED2
-
-	/* Global Variables: */
-		extern MS_CommandBlockWrapper_t  CommandBlock;
-		extern MS_CommandStatusWrapper_t CommandStatus;
-		extern volatile bool             IsMassStoreReset;
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void MassStorage_Task(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-		#if defined(INCLUDE_FROM_MASSSTORAGE_C)
-			static bool ReadInCommandBlock(void);
-			static void ReturnCommandStatus(void);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/MassStorage.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/MassStorage.txt
deleted file mode 100644
index e544634142..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/MassStorage.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Mass Storage Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Mass Storage Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Bulk-Only Transport</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Mass Storage Standard \n
- *        USB Bulk-Only Transport Standard \n
- *        SCSI Primary Commands Specification \n
- *        SCSI Block Commands Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Mass Storage device demonstration application. This gives a simple
- *  reference application for implementing a USB Mass Storage device using
- *  the basic USB UFI drivers in all modern OSes (i.e. no special drivers
- *  required).
- *
- *  On start-up the system will automatically enumerate and function as an
- *  external mass storage device which may be formatted and used in the same
- *  manner as commercial USB Mass Storage devices.
- *
- *  You will need to format the mass storage drive upon first run of this
- *  demonstration - as the device acts only as a data block transport between
- *  the host and the storage media, it does not matter what file system is used,
- *  as the data interpretation is performed by the host and not the USB device.
- *
- *  This demo is not restricted to only a single LUN (logical disk); by changing
- *  the TOTAL_LUNS value in DataflashManager.h, any number of LUNs can be used
- *  (from 1 to 255), with each LUN being allocated an equal portion of the available
- *  Dataflash memory.
- *
- *  The USB control endpoint is managed entirely by the library using endpoint
- *  interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for
- *  the host to reset the Mass Storage device state during long transfers without
- *  the need for complicated polling logic.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>TOTAL_LUNS</td>
- *    <td>AppConfig.h</td>
- *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive
- *        - this can be set to any positive non-zero amount.</td>
- *   </tr>
- *   <tr>
- *    <td>DISK_READ_ONLY</td>
- *    <td>AppConfig.h</td>
- *    <td>Indicates if the disk should be write protected or not.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/asf.xml
deleted file mode 100644
index 68ae2c28ed..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/asf.xml
+++ /dev/null
@@ -1,67 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.avr8">

-		<require idref="lufa.demos.device.lowlevel.mass_storage"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.xmega">

-		<require idref="lufa.demos.device.lowlevel.mass_storage"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.lowlevel.mass_storage" caption="Mass Storage Device Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Mass Storage device demo, implementing a basic USB storage disk using a Dataflash memory IC. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="Mass Storage Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MassStorage.txt"/>

-

-		<build type="c-source" value="MassStorage.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="c-source" value="Lib/DataflashManager.c"/>

-		<build type="c-source" value="Lib/SCSI.c"/>

-		<build type="header-file" value="MassStorage.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="header-file" value="Lib/DataflashManager.h"/>

-		<build type="header-file" value="Lib/SCSI.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.dataflash"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/doxyfile
deleted file mode 100644
index 9629ccb8a2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Mass Storage Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/makefile
deleted file mode 100644
index c757bb0feb..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/MassStorage/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MassStorage
-SRC          = $(TARGET).c Descriptors.c Lib/DataflashManager.c Lib/SCSI.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h
deleted file mode 100644
index c6542445da..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               1
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Descriptors.c
deleted file mode 100644
index c2064272bf..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Descriptors.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
-{
-	HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
-	HID_RI_USAGE(8, 0x02), /* Mouse */
-	HID_RI_COLLECTION(8, 0x01), /* Application */
-		HID_RI_USAGE(8, 0x01), /* Pointer */
-		HID_RI_COLLECTION(8, 0x00), /* Physical */
-			HID_RI_USAGE_PAGE(8, 0x09), /* Button */
-			HID_RI_USAGE_MINIMUM(8, 0x01),
-			HID_RI_USAGE_MAXIMUM(8, 0x03),
-			HID_RI_LOGICAL_MINIMUM(8, 0x00),
-			HID_RI_LOGICAL_MAXIMUM(8, 0x01),
-			HID_RI_REPORT_COUNT(8, 0x03),
-			HID_RI_REPORT_SIZE(8, 0x01),
-			HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
-			HID_RI_REPORT_COUNT(8, 0x01),
-			HID_RI_REPORT_SIZE(8, 0x05),
-			HID_RI_INPUT(8, HID_IOF_CONSTANT),
-			HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */
-			HID_RI_USAGE(8, 0x30), /* Usage X */
-			HID_RI_USAGE(8, 0x31), /* Usage Y */
-			HID_RI_LOGICAL_MINIMUM(8, -1),
-			HID_RI_LOGICAL_MAXIMUM(8, 1),
-			HID_RI_PHYSICAL_MINIMUM(8, -1),
-			HID_RI_PHYSICAL_MAXIMUM(8, 1),
-			HID_RI_REPORT_COUNT(8, 0x02),
-			HID_RI_REPORT_SIZE(8, 0x08),
-			HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
-		HID_RI_END_COLLECTION(0),
-	HID_RI_END_COLLECTION(0),
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2041,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.HID_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Mouse,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_BootSubclass,
-			.Protocol               = HID_CSCP_MouseBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_MouseHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(MouseReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MOUSE_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MOUSE_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mouse Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_MouseHID;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case HID_DTYPE_Report:
-			Address = &MouseReport;
-			Size    = sizeof(MouseReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Descriptors.h
deleted file mode 100644
index 40646b1047..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Descriptors.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-	/* Macros: */
-		/** Endpoint address of the Mouse HID reporting IN endpoint. */
-		#define MOUSE_EPADDR              (ENDPOINT_DIR_IN | 1)
-
-		/** Size in bytes of the Mouse HID reporting IN endpoint. */
-		#define MOUSE_EPSIZE              8
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Mouse HID Interface
-			USB_Descriptor_Interface_t            HID_Interface;
-			USB_HID_Descriptor_HID_t              HID_MouseHID;
-			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_Mouse = 0, /**< Mouse interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Mouse.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Mouse.c
deleted file mode 100644
index 638e5f3511..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Mouse.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the Mouse demo. This file contains the main tasks of the demo and
- *  is responsible for the initial application hardware configuration.
- */
-
-#include "Mouse.h"
-
-/** Indicates what report mode the host has requested, true for normal HID reporting mode, \c false for special boot
- *  protocol reporting mode.
- */
-static bool UsingReportProtocol = true;
-
-/** Current Idle period. This is set by the host via a Set Idle HID class request to silence the device's reports
- *  for either the entire idle duration, or until the report status changes (e.g. the user moves the mouse).
- */
-static uint16_t IdleCount = 0;
-
-/** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle
- *  milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request
- *  the current idle period via a Get Idle HID class request, thus its value must be preserved.
- */
-static uint16_t IdleMSRemaining = 0;
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		Mouse_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	Buttons_Init();
-	USB_Init();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Device_Connect(void)
-{
-	/* Indicate USB enumerating */
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	/* Default to report protocol on connect */
-	UsingReportProtocol = true;
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs and stops the USB management and Mouse reporting tasks.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Indicate USB not ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
- *  of the USB device after enumeration - the device endpoints are configured and the mouse reporting task started.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup HID Report Endpoint */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_EPADDR, EP_TYPE_INTERRUPT, MOUSE_EPSIZE, 1);
-
-	/* Turn on Start-of-Frame events for tracking HID report period expiry */
-	USB_Device_EnableSOFEvents();
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- *  the device from the USB host before passing along unhandled control requests to the library for processing
- *  internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	/* Handle HID Class specific requests */
-	switch (USB_ControlRequest.bRequest)
-	{
-		case HID_REQ_GetReport:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				USB_MouseReport_Data_t MouseReportData;
-
-				/* Create the next mouse report for transmission to the host */
-				CreateMouseReport(&MouseReportData);
-
-				Endpoint_ClearSETUP();
-
-				/* Write the report data to the control endpoint */
-				Endpoint_Write_Control_Stream_LE(&MouseReportData, sizeof(MouseReportData));
-				Endpoint_ClearOUT();
-
-				/* Clear the report data afterwards */
-				memset(&MouseReportData, 0, sizeof(MouseReportData));
-			}
-
-			break;
-		case HID_REQ_GetProtocol:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-
-				/* Write the current protocol flag to the host */
-				Endpoint_Write_8(UsingReportProtocol);
-
-				Endpoint_ClearIN();
-				Endpoint_ClearStatusStage();
-			}
-
-			break;
-		case HID_REQ_SetProtocol:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-				Endpoint_ClearStatusStage();
-
-				/* Set or clear the flag depending on what the host indicates that the current Protocol should be */
-				UsingReportProtocol = (USB_ControlRequest.wValue != 0);
-			}
-
-			break;
-		case HID_REQ_SetIdle:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-				Endpoint_ClearStatusStage();
-
-				/* Get idle period in MSB, must multiply by 4 to get the duration in milliseconds */
-				IdleCount = ((USB_ControlRequest.wValue & 0xFF00) >> 6);
-			}
-
-			break;
-		case HID_REQ_GetIdle:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-
-				/* Write the current idle duration to the host, must be divided by 4 before sent to host */
-				Endpoint_Write_8(IdleCount >> 2);
-
-				Endpoint_ClearIN();
-				Endpoint_ClearStatusStage();
-			}
-
-			break;
-	}
-}
-
-/** Event handler for the USB device Start Of Frame event. */
-void EVENT_USB_Device_StartOfFrame(void)
-{
-	/* One millisecond has elapsed, decrement the idle time remaining counter if it has not already elapsed */
-	if (IdleMSRemaining)
-	  IdleMSRemaining--;
-}
-
-/** Fills the given HID report data structure with the next HID report to send to the host.
- *
- *  \param[out] ReportData  Pointer to a HID report data structure to be filled
- */
-void CreateMouseReport(USB_MouseReport_Data_t* const ReportData)
-{
-	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
-	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
-
-	/* Clear the report contents */
-	memset(ReportData, 0, sizeof(USB_MouseReport_Data_t));
-
-	if (JoyStatus_LCL & JOY_UP)
-	  ReportData->Y = -1;
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  ReportData->Y =  1;
-
-	if (JoyStatus_LCL & JOY_LEFT)
-	  ReportData->X = -1;
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  ReportData->X =  1;
-
-	if (JoyStatus_LCL & JOY_PRESS)
-	  ReportData->Button |= (1 << 0);
-
-	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
-	  ReportData->Button |= (1 << 1);
-}
-
-/** Sends the next HID report to the host, via the keyboard data endpoint. */
-void SendNextReport(void)
-{
-	static USB_MouseReport_Data_t PrevMouseReportData;
-	USB_MouseReport_Data_t        MouseReportData;
-	bool                          SendReport;
-
-	/* Create the next mouse report for transmission to the host */
-	CreateMouseReport(&MouseReportData);
-
-	/* Check to see if the report data has changed - if so a report MUST be sent */
-	SendReport = (memcmp(&PrevMouseReportData, &MouseReportData, sizeof(USB_MouseReport_Data_t)) != 0);
-
-	/* Override the check if the Y or X values are non-zero - we want continuous movement while the joystick
-	 * is being held down (via continuous reports), otherwise the cursor will only move once per joystick toggle */
-	if ((MouseReportData.Y != 0) || (MouseReportData.X != 0))
-	  SendReport = true;
-
-	/* Check if the idle period is set and has elapsed */
-	if (IdleCount && (!(IdleMSRemaining)))
-	{
-		/* Reset the idle time remaining counter */
-		IdleMSRemaining = IdleCount;
-
-		/* Idle period is set and has elapsed, must send a report to the host */
-		SendReport = true;
-	}
-
-	/* Select the Mouse Report Endpoint */
-	Endpoint_SelectEndpoint(MOUSE_EPADDR);
-
-	/* Check if Mouse Endpoint Ready for Read/Write and if we should send a new report */
-	if (Endpoint_IsReadWriteAllowed() && SendReport)
-	{
-		/* Save the current report data for later comparison to check for changes */
-		PrevMouseReportData = MouseReportData;
-
-		/* Write Mouse Report Data */
-		Endpoint_Write_Stream_LE(&MouseReportData, sizeof(MouseReportData), NULL);
-
-		/* Finalize the stream transfer to send the last packet */
-		Endpoint_ClearIN();
-	}
-}
-
-/** Task to manage HID report generation and transmission to the host, when in report mode. */
-void Mouse_Task(void)
-{
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	/* Send the next mouse report to the host */
-	SendNextReport();
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Mouse.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Mouse.h
deleted file mode 100644
index ee330feb7d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Mouse.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Mouse.c.
- */
-
-#ifndef _MOUSE_H_
-#define _MOUSE_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void Mouse_Task(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-		void CreateMouseReport(USB_MouseReport_Data_t* const ReportData);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Mouse.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Mouse.txt
deleted file mode 100644
index 7f1c38430f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/Mouse.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Mouse Device Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Mouse demonstration application. This gives a simple reference
- *  application for implementing a USB Mouse using the basic USB HID
- *  drivers in all modern OSes (i.e. no special drivers required). It is
- *  boot protocol compatible, and thus works under compatible BIOS as if
- *  it was a native mouse (e.g. PS/2).
- *
- *  On start-up the system will automatically enumerate and function
- *  as a mouse when the USB connection to a host is present. To use
- *  the mouse, move the joystick to move the pointer, and push the
- *  joystick inwards to simulate a left-button click. The HWB serves as
- *  the right mouse button.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/asf.xml
deleted file mode 100644
index ac21d0771a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/asf.xml
+++ /dev/null
@@ -1,62 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.avr8">

-		<require idref="lufa.demos.device.lowlevel.mouse"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.xmega">

-		<require idref="lufa.demos.device.lowlevel.mouse"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.lowlevel.mouse" caption="Mouse HID Device Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Mouse device demo, implementing a basic USB mouse device that can send movement information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="Mouse.txt"/>

-

-		<build type="c-source" value="Mouse.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Mouse.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-		<require idref="lufa.drivers.board.joystick"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/doxyfile
deleted file mode 100644
index 150171c065..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Mouse Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/makefile
deleted file mode 100644
index 7230c176f7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/Mouse/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = Mouse
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Config/AppConfig.h
deleted file mode 100644
index 92a4f818e7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Config/AppConfig.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define CLIENT_IP_ADDRESS                { 10,     0,    0,    1}
-	#define SERVER_IP_ADDRESS                { 10,     0,    0,    2}
-
-	#define ADAPTER_MAC_ADDRESS              {0x02, 0x00, 0x02, 0x00, 0x02, 0x00}
-	#define SERVER_MAC_ADDRESS               {0x00, 0x01, 0x00, 0x01, 0x00, 0x01}
-
-	#define NO_DECODE_ETHERNET
-	#define NO_DECODE_ARP
-	#define NO_DECODE_IP
-	#define NO_DECODE_ICMP
-	#define NO_DECODE_TCP
-	#define NO_DECODE_UDP
-	#define NO_DECODE_DHCP
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Config/LUFAConfig.h
deleted file mode 100644
index fa03979109..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               3
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c
deleted file mode 100644
index cab6717f9c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = CDC_CSCP_CDCClass,
-	.SubClass               = CDC_CSCP_NoSpecificSubclass,
-	.Protocol               = CDC_CSCP_NoSpecificProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x204C,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 2,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.CDC_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_VendorSpecificProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x00,
-		},
-
-	.CDC_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
-		},
-
-	.CDC_NotificationEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.RNDIS_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.RNDIS_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA RNDIS CDC Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h
deleted file mode 100644
index fb345e8f58..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the CDC device-to-host data IN endpoint. */
-		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 1)
-
-		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
-		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 2)
-
-		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 3)
-
-		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                64
-
-		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPSIZE        8
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// RNDIS CDC Control Interface
-			USB_Descriptor_Interface_t            CDC_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t CDC_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t    CDC_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t  CDC_Functional_Union;
-			USB_Descriptor_Endpoint_t             CDC_NotificationEndpoint;
-
-			// RNDIS CDC Data Interface
-			USB_Descriptor_Interface_t            CDC_DCI_Interface;
-			USB_Descriptor_Endpoint_t             RNDIS_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t             RNDIS_DataInEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
-			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/LUFA RNDIS.inf b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/LUFA RNDIS.inf
deleted file mode 100644
index f34e55f995..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/LUFA RNDIS.inf
+++ /dev/null
@@ -1,59 +0,0 @@
-;     Windows LUFA RNDIS Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-[DefaultInstall]
-CopyINF="LUFA RNDIS.inf"
-
-[Version]
-Signature="$Windows NT$"
-Class=Net
-ClassGuid={4d36e972-e325-11ce-bfc1-08002be10318}
-Provider=%MFGNAME%
-DriverVer=7/1/2012,10.0.0.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
-
-[ControlFlags]
-ExcludeFromSelect=*
-
-[DriverInstall]
-Characteristics=0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType=15
-include=netrndis.inf
-needs=Usb_Rndis.ndi
-AddReg=Rndis_AddReg_Vista
-
-[DriverInstall.Services]
-include=netrndis.inf
-needs=Usb_Rndis.ndi.Services
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
-
-[DeviceList.NTx86]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
-
-[DeviceList.NTia64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGNAME="http://www.lufa-lib.org"
-DESCRIPTION="LUFA USB RNDIS Demo"
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.c
deleted file mode 100644
index 99f3487b11..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Address Resolution Protocol (ARP) packet handling routines. This protocol handles the
- *  conversion of physical MAC addresses to protocol IP addresses between the host and the
- *  device.
- */
-
-#include "ARP.h"
-
-/** Processes an ARP packet inside an Ethernet frame, and writes the appropriate response
- *  to the output Ethernet frame if the host is requesting the IP or MAC address of the
- *  virtual server device on the network.
- *
- *  \param[in] InDataStart    Pointer to the start of the incoming packet's ARP header
- *  \param[out] OutDataStart  Pointer to the start of the outgoing packet's ARP header
- *
- *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
- */
-int16_t ARP_ProcessARPPacket(void* InDataStart,
-                             void* OutDataStart)
-{
-	DecodeARPHeader(InDataStart);
-
-	ARP_Header_t* ARPHeaderIN  = (ARP_Header_t*)InDataStart;
-	ARP_Header_t* ARPHeaderOUT = (ARP_Header_t*)OutDataStart;
-
-	/* Ensure that the ARP request is a IPv4 request packet */
-	if ((SwapEndian_16(ARPHeaderIN->ProtocolType) == ETHERTYPE_IPV4) &&
-	    (SwapEndian_16(ARPHeaderIN->Operation) == ARP_OPERATION_REQUEST))
-	{
-		/* If the ARP packet is requesting the MAC or IP of the virtual webserver, return the response */
-		if (IP_COMPARE(&ARPHeaderIN->TPA, &ServerIPAddress) ||
-		    MAC_COMPARE(&ARPHeaderIN->THA, &ServerMACAddress))
-		{
-			/* Fill out the ARP response header */
-			ARPHeaderOUT->HardwareType = ARPHeaderIN->HardwareType;
-			ARPHeaderOUT->ProtocolType = ARPHeaderIN->ProtocolType;
-			ARPHeaderOUT->HLEN         = ARPHeaderIN->HLEN;
-			ARPHeaderOUT->PLEN         = ARPHeaderIN->PLEN;
-			ARPHeaderOUT->Operation    = SwapEndian_16(ARP_OPERATION_REPLY);
-
-			/* Copy over the sender MAC/IP to the target fields for the response */
-			ARPHeaderOUT->THA = ARPHeaderIN->SHA;
-			ARPHeaderOUT->TPA = ARPHeaderIN->SPA;
-
-			/* Copy over the new sender MAC/IP - MAC and IP addresses of the virtual webserver */
-			ARPHeaderOUT->SHA = ServerMACAddress;
-			ARPHeaderOUT->SPA = ServerIPAddress;
-
-			/* Return the size of the response so far */
-			return sizeof(ARP_Header_t);
-		}
-	}
-
-	return NO_RESPONSE;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.h
deleted file mode 100644
index 95a8f84b76..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ARP.c.
- */
-
-#ifndef _ARP_H_
-#define _ARP_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <string.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "EthernetProtocols.h"
-		#include "Ethernet.h"
-		#include "ProtocolDecoders.h"
-
-	/* Macros: */
-		/** ARP header operation constant, indicating a request from a host for an address translation. */
-		#define ARP_OPERATION_REQUEST            1
-
-		/** ARP header operation constant, indicating a reply from a host giving an address translation. */
-		#define ARP_OPERATION_REPLY              2
-
-	/* Type Defines: */
-		/** Type define for an ARP packet inside an Ethernet frame. */
-		typedef struct
-		{
-			uint16_t      HardwareType; /**< Hardware type constant, indicating the hardware used */
-			uint16_t      ProtocolType; /**< Protocol being resolved, usually ETHERTYPE_IPV4 */
-
-			uint8_t       HLEN; /**< Length in bytes of the source/destination hardware addresses */
-			uint8_t       PLEN; /**< Length in bytes of the source/destination protocol addresses */
-			uint16_t      Operation; /**< Type of operation, either ARP_OPERATION_REQUEST or ARP_OPERATION_REPLY */
-
-			MAC_Address_t SHA; /**< Sender's hardware address */
-			IP_Address_t  SPA; /**< Sender's protocol address */
-			MAC_Address_t THA; /**< Target's hardware address */
-			IP_Address_t  TPA; /**< Target's protocol address */
-		} ARP_Header_t;
-
-	/* Function Prototypes: */
-		int16_t ARP_ProcessARPPacket(void* InDataStart,
-		                             void* OutDataStart);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.c
deleted file mode 100644
index 3af9726485..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Dynamic Host Configuration Protocol (DHCP) packet handling routines. This protocol
- *  handles the automatic IP negotiation to the host, so that the host will use the provided
- *  IP address given to it by the device.
- */
-
-#include "DHCP.h"
-
-/** Processes a DHCP packet inside an Ethernet frame, and writes the appropriate response
- *  to the output Ethernet frame if the host is requesting or accepting an IP address.
- *
- *  \param[in] IPHeaderInStart      Pointer to the start of the incoming packet's IP header
- *  \param[in] DHCPHeaderInStart    Pointer to the start of the incoming packet's DHCP header
- *  \param[out] DHCPHeaderOutStart  Pointer to the start of the outgoing packet's DHCP header
- *
- *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
- */
-int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart,
-                               void* DHCPHeaderInStart,
-                               void* DHCPHeaderOutStart)
-{
-	IP_Header_t*   IPHeaderIN    = (IP_Header_t*)IPHeaderInStart;
-	DHCP_Header_t* DHCPHeaderIN  = (DHCP_Header_t*)DHCPHeaderInStart;
-	DHCP_Header_t* DHCPHeaderOUT = (DHCP_Header_t*)DHCPHeaderOutStart;
-
-	uint8_t* DHCPOptionsINStart  = (uint8_t*)(DHCPHeaderInStart  + sizeof(DHCP_Header_t));
-	uint8_t* DHCPOptionsOUTStart = (uint8_t*)(DHCPHeaderOutStart + sizeof(DHCP_Header_t));
-
-	DecodeDHCPHeader(DHCPHeaderInStart);
-
-	/* Zero out the response DHCP packet, as much of it is legacy and left at 0 */
-	memset(DHCPHeaderOUT, 0, sizeof(DHCP_Header_t));
-
-	/* Fill out the response DHCP packet */
-	DHCPHeaderOUT->HardwareType          = DHCPHeaderIN->HardwareType;
-	DHCPHeaderOUT->Operation             = DHCP_OP_BOOTREPLY;
-	DHCPHeaderOUT->HardwareAddressLength = DHCPHeaderIN->HardwareAddressLength;
-	DHCPHeaderOUT->Hops                  = 0;
-	DHCPHeaderOUT->TransactionID         = DHCPHeaderIN->TransactionID;
-	DHCPHeaderOUT->ElapsedSeconds        = 0;
-	DHCPHeaderOUT->Flags                 = DHCPHeaderIN->Flags;
-	DHCPHeaderOUT->YourIP                = ClientIPAddress;
-	memmove(&DHCPHeaderOUT->ClientHardwareAddress, &DHCPHeaderIN->ClientHardwareAddress, sizeof(MAC_Address_t));
-	DHCPHeaderOUT->Cookie                = SwapEndian_32(DHCP_MAGIC_COOKIE);
-
-	/* Alter the incoming IP packet header so that the corrected IP source and destinations are used - this means that
-	   when the response IP header is generated, it will use the corrected addresses and not the null/broatcast addresses */
-	IPHeaderIN->SourceAddress      = ClientIPAddress;
-	IPHeaderIN->DestinationAddress = ServerIPAddress;
-
-	/* Process the incoming DHCP packet options */
-	while (DHCPOptionsINStart[0] != DHCP_OPTION_END)
-	{
-		/* Find the Message Type DHCP option, to determine the type of DHCP packet */
-		if (DHCPOptionsINStart[0] == DHCP_OPTION_MESSAGETYPE)
-		{
-			if ((DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_DISCOVER) || (DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_REQUEST))
-			{
-				/* Fill out the response DHCP packet options for a DHCP OFFER or ACK response */
-
-				*(DHCPOptionsOUTStart++) = DHCP_OPTION_MESSAGETYPE;
-				*(DHCPOptionsOUTStart++) = 1;
-				*(DHCPOptionsOUTStart++) = (DHCPOptionsINStart[2] == DHCP_MESSAGETYPE_DISCOVER) ? DHCP_MESSAGETYPE_OFFER
-																								: DHCP_MESSAGETYPE_ACK;
-
-				*(DHCPOptionsOUTStart++) = DHCP_OPTION_SUBNETMASK;
-				*(DHCPOptionsOUTStart++) = 4;
-				*(DHCPOptionsOUTStart++) = 0xFF;
-				*(DHCPOptionsOUTStart++) = 0xFF;
-				*(DHCPOptionsOUTStart++) = 0xFF;
-				*(DHCPOptionsOUTStart++) = 0x00;
-
-				*(DHCPOptionsOUTStart++) = DHCP_OPTION_DHCPSERVER;
-				*(DHCPOptionsOUTStart++) = sizeof(IP_Address_t);
-				memcpy(DHCPOptionsOUTStart, &ServerIPAddress, sizeof(IP_Address_t));
-				DHCPOptionsOUTStart     += sizeof(IP_Address_t);
-
-				*(DHCPOptionsOUTStart++) = DHCP_OPTION_END;
-
-				return (sizeof(DHCP_Header_t) + 12 + sizeof(IP_Address_t));
-			}
-		}
-
-		/* Go to the next DHCP option - skip one byte if option is a padding byte, else skip the complete option's size */
-		DHCPOptionsINStart += ((DHCPOptionsINStart[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptionsINStart[1] + 2));
-	}
-
-	return NO_RESPONSE;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.h
deleted file mode 100644
index 2d57397de9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DHCP.c.
- */
-
-#ifndef _DHCP_H_
-#define _DHCP_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <string.h>
-
-		#include "EthernetProtocols.h"
-		#include "Ethernet.h"
-		#include "ProtocolDecoders.h"
-
-	/* Macros: */
-		/** DHCP operation constant, indicating a request from a host to a DHCP server. */
-		#define DHCP_OP_BOOTREQUEST       0x01
-
-		/** DHCP operation constant, indicating a reply from a DHCP server to a host. */
-		#define DHCP_OP_BOOTREPLY         0x02
-
-		/** Hardware type constant, indicating Ethernet as a carrier. */
-		#define DHCP_HTYPE_ETHERNET       0x01
-
-		/** Magic boot protocol "cookie", inserted into all BOOTP packets (BOOTP is the carrier of DHCP). */
-		#define DHCP_MAGIC_COOKIE         0x63825363
-
-		/** DHCP option list entry header, indicating that a subnet mask will follow. */
-		#define DHCP_OPTION_SUBNETMASK    1
-
-		/** DHCP option list entry header, indicating that the DHCP message type constant will follow. */
-		#define DHCP_OPTION_MESSAGETYPE   53
-
-		/** DHCP option list entry header, indicating that the IP address of the DHCP server will follow. */
-		#define DHCP_OPTION_DHCPSERVER    54
-
-		/** DHCP option list entry header, used to pad out option data. */
-		#define DHCP_OPTION_PAD           0
-
-		/** DHCP option list entry header, indicating the end of option data. */
-		#define DHCP_OPTION_END           255
-
-		/** Message type constant, used in the DHCP option data field, requesting that a DHCP server offer an IP address. */
-		#define DHCP_MESSAGETYPE_DISCOVER 1
-
-		/** Message type constant, used in the DHCP option data field, indicating that a DHCP server is offering an IP address. */
-		#define DHCP_MESSAGETYPE_OFFER    2
-
-		/** Message type constant, used in the DHCP option data field, requesting that a DHCP server lease a given IP address. */
-		#define DHCP_MESSAGETYPE_REQUEST  3
-
-		/** Message type constant, used in the DHCP option data field, declining an offered DHCP server IP address lease. */
-		#define DHCP_MESSAGETYPE_DECLINE  4
-
-		/** Message type constant, used in the DHCP option data field, ACKing a host IP lease request. */
-		#define DHCP_MESSAGETYPE_ACK      5
-
-		/** Message type constant, used in the DHCP option data field, NACKing a host IP lease request. */
-		#define DHCP_MESSAGETYPE_NACK     6
-
-		/** Message type constant, used in the DHCP option data field, indicating that a host is releasing a leased IP address. */
-		#define DHCP_MESSAGETYPE_RELEASE  7
-
-	/* Type Defines: */
-		/** Type define for a DHCP packet inside an Ethernet frame. */
-		typedef struct
-		{
-			uint8_t  Operation; /**< DHCP operation, either DHCP_OP_BOOTREQUEST or DHCP_OP_BOOTREPLY */
-			uint8_t  HardwareType; /**< Hardware carrier type constant */
-			uint8_t  HardwareAddressLength;  /**< Length in bytes of a hardware (MAC) address on the network */
-			uint8_t  Hops; /**< Number of hops required to reach the server, unused */
-
-			uint32_t TransactionID; /**< Unique ID of the DHCP packet, for positive matching between sent and received packets */
-
-			uint16_t ElapsedSeconds; /**< Elapsed seconds since the request was made */
-			uint16_t Flags; /**< BOOTP packet flags */
-
-			IP_Address_t ClientIP; /**< Client IP address, if already leased an IP */
-			IP_Address_t YourIP; /**< Client IP address */
-			IP_Address_t NextServerIP; /**< Legacy BOOTP protocol field, unused for DHCP */
-			IP_Address_t RelayAgentIP; /**< Legacy BOOTP protocol field, unused for DHCP */
-
-			uint8_t ClientHardwareAddress[16]; /**< Hardware (MAC) address of the client making a request to the DHCP server */
-			uint8_t ServerHostnameString[64]; /**< Legacy BOOTP protocol field, unused for DHCP */
-			uint8_t BootFileName[128]; /**< Legacy BOOTP protocol field, unused for DHCP */
-
-			uint32_t Cookie; /**< Magic BOOTP protocol cookie to indicate a valid packet */
-		} DHCP_Header_t;
-
-	/* Function Prototypes: */
-		int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart,
-		                               void* DHCPHeaderInStart,
-		                               void* DHCPHeaderOutStart);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.c
deleted file mode 100644
index 483e8bb27c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Ethernet frame packet handling routines. This protocol handles the processing of raw Ethernet
- *  frames sent and received, deferring the processing of sub-packet protocols to the appropriate
- *  protocol handlers, such as DHCP or ARP.
- */
-
-#include "Ethernet.h"
-
-/** Ethernet Frame buffer structure, to hold the incoming Ethernet frame from the host. */
-Ethernet_Frame_Info_t FrameIN;
-
-/** Ethernet Frame buffer structure, to hold the outgoing Ethernet frame to the host. */
-Ethernet_Frame_Info_t FrameOUT;
-
-/** Constant for convenience when checking against or setting a MAC address to the virtual server MAC address. */
-const MAC_Address_t ServerMACAddress    = {SERVER_MAC_ADDRESS};
-
-/** Constant for convenience when checking against or setting an IP address to the virtual server IP address. */
-const IP_Address_t  ServerIPAddress     = {SERVER_IP_ADDRESS};
-
-/** Constant for convenience when checking against or setting a MAC address to the broadcast MAC address. */
-const MAC_Address_t BroadcastMACAddress = {BROADCAST_MAC_ADDRESS};
-
-/** Constant for convenience when checking against or setting a IP address to the broadcast IP address. */
-const IP_Address_t  BroadcastIPAddress  = {BROADCAST_IP_ADDRESS};
-
-/** Constant for convenience when checking against or setting an IP address to the client (host) IP address. */
-const IP_Address_t  ClientIPAddress     = {CLIENT_IP_ADDRESS};
-
-
-/** Processes an incoming Ethernet frame, and writes the appropriate response to the output Ethernet
- *  frame buffer if the sub protocol handlers create a valid response.
- */
-void Ethernet_ProcessPacket(void)
-{
-	DecodeEthernetFrameHeader(FrameIN.FrameData);
-
-	/* Cast the incoming Ethernet frame to the Ethernet header type */
-	Ethernet_Frame_Header_t* FrameINHeader  = (Ethernet_Frame_Header_t*)&FrameIN.FrameData;
-	Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT.FrameData;
-
-	int16_t                  RetSize        = NO_RESPONSE;
-
-	/* Ensure frame is addressed to either all (broadcast) or the virtual webserver, and is a type II frame */
-	if ((MAC_COMPARE(&FrameINHeader->Destination, &ServerMACAddress) ||
-	     MAC_COMPARE(&FrameINHeader->Destination, &BroadcastMACAddress)) &&
-		(SwapEndian_16(FrameIN.FrameLength) > ETHERNET_VER2_MINSIZE))
-	{
-		/* Process the packet depending on its protocol */
-		switch (SwapEndian_16(FrameINHeader->EtherType))
-		{
-			case ETHERTYPE_ARP:
-				RetSize = ARP_ProcessARPPacket(&FrameIN.FrameData[sizeof(Ethernet_Frame_Header_t)],
-				                               &FrameOUT.FrameData[sizeof(Ethernet_Frame_Header_t)]);
-				break;
-			case ETHERTYPE_IPV4:
-				RetSize = IP_ProcessIPPacket(&FrameIN.FrameData[sizeof(Ethernet_Frame_Header_t)],
-				                             &FrameOUT.FrameData[sizeof(Ethernet_Frame_Header_t)]);
-				break;
-		}
-
-		/* Protocol processing routine has filled a response, complete the ethernet frame header */
-		if (RetSize > 0)
-		{
-			/* Fill out the response Ethernet frame header */
-			FrameOUTHeader->Source          = ServerMACAddress;
-			FrameOUTHeader->Destination     = FrameINHeader->Source;
-			FrameOUTHeader->EtherType       = FrameINHeader->EtherType;
-
-			/* Set the response length in the buffer and indicate that a response is ready to be sent */
-			FrameOUT.FrameLength            = (sizeof(Ethernet_Frame_Header_t) + RetSize);
-		}
-	}
-
-	/* Check if the packet was processed */
-	if (RetSize != NO_PROCESS)
-	{
-		/* Clear the frame buffer */
-		FrameIN.FrameLength = 0;
-	}
-}
-
-/** Calculates the appropriate ethernet checksum, consisting of the addition of the one's
- *  compliment of each word, complimented.
- *
- *  \param[in] Data   Pointer to the packet buffer data whose checksum must be calculated
- *  \param[in] Bytes  Number of bytes in the data buffer to process
- *
- *  \return A 16-bit Ethernet checksum value
- */
-uint16_t Ethernet_Checksum16(void* Data,
-                             uint16_t Bytes)
-{
-	uint16_t* Words    = (uint16_t*)Data;
-	uint32_t  Checksum = 0;
-
-	for (uint16_t CurrWord = 0; CurrWord < (Bytes >> 1); CurrWord++)
-	  Checksum += Words[CurrWord];
-
-	while (Checksum & 0xFFFF0000)
-	  Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16));
-
-	return ~Checksum;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h
deleted file mode 100644
index 93d5c47717..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Ethernet.c.
- */
-
-#ifndef _ETHERNET_H_
-#define _ETHERNET_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <string.h>
-
-		#include "Config/AppConfig.h"
-
-		#include "EthernetProtocols.h"
-		#include "ProtocolDecoders.h"
-		#include "ICMP.h"
-		#include "TCP.h"
-		#include "UDP.h"
-		#include "DHCP.h"
-		#include "ARP.h"
-		#include "IP.h"
-
-	/* Macros: */
-		/** Physical MAC address of the network broadcast address. */
-		#define BROADCAST_MAC_ADDRESS            {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}
-
-		/** Performs a comparison between two MAC addresses, indicating if they are identical.
-		 *
-		 *  \param[in] MAC1  First MAC address
-		 *  \param[in] MAC2  Second MAC address
-		 *
-		 *  \return True if the addresses match, \c false otherwise
-		 */
-		#define MAC_COMPARE(MAC1, MAC2)          (memcmp(MAC1, MAC2, sizeof(MAC_Address_t)) == 0)
-
-		/** Maximum size of an incoming or outgoing Ethernet frame in bytes. */
-		#define ETHERNET_FRAME_SIZE_MAX          1500
-
-		/** Minimum size of an Ethernet packet in bytes, to conform to the Ethernet V2 packet standard. */
-		#define ETHERNET_VER2_MINSIZE            0x0600
-
-		/** Return value for all sub protocol handling routines, indicating that no response packet has been generated. */
-		#define NO_RESPONSE                      0
-
-		/** Return value for all sub protocol handling routines, indicating that the packet has not yet been handled. */
-		#define NO_PROCESS                       -1
-
-	/* Type Defines: */
-		/** Type define for an Ethernet frame buffer data and information structure. */
-		typedef struct
-		{
-			uint8_t  FrameData[ETHERNET_FRAME_SIZE_MAX]; /**< Ethernet frame contents. */
-			uint16_t FrameLength; /**< Length in bytes of the Ethernet frame stored in the buffer. */
-		} Ethernet_Frame_Info_t;
-
-		/** Type define for an Ethernet frame header. */
-		typedef struct
-		{
-			MAC_Address_t Destination; /**< Physical MAC address of the packet recipient */
-			MAC_Address_t Source; /**< Physics MAC address of the packet source */
-			uint16_t      EtherType; /**< Ethernet packet sub-protocol type, for Ethernet V2 packets */
-		} Ethernet_Frame_Header_t;
-
-	/* External Variables: */
-		extern Ethernet_Frame_Info_t FrameIN;
-		extern Ethernet_Frame_Info_t FrameOUT;
-
-		extern const MAC_Address_t ServerMACAddress;
-		extern const IP_Address_t  ServerIPAddress;
-		extern const MAC_Address_t BroadcastMACAddress;
-		extern const IP_Address_t  BroadcastIPAddress;
-		extern const IP_Address_t  ClientIPAddress;
-
-	/* Function Prototypes: */
-		void     Ethernet_ProcessPacket(void);
-		uint16_t Ethernet_Checksum16(void* Data,
-		                             uint16_t Bytes);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/EthernetProtocols.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/EthernetProtocols.h
deleted file mode 100644
index bec6705ade..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/EthernetProtocols.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  General Ethernet protocol constants and type defines, for use by
- *  all network protocol portions of the TCP/IP stack.
- */
-
-#ifndef _ETHERNET_PROTOCOLS_H_
-#define _ETHERNET_PROTOCOLS_H_
-
-	/* Macros: */
-		#define ETHERTYPE_IPV4                   0x0800
-		#define ETHERTYPE_ARP                    0x0806
-		#define ETHERTYPE_RARP                   0x8035
-		#define ETHERTYPE_APPLETALK              0x809b
-		#define ETHERTYPE_APPLETALKARP           0x80f3
-		#define ETHERTYPE_IEEE8021Q              0x8100
-		#define ETHERTYPE_NOVELLIPX              0x8137
-		#define ETHERTYPE_NOVELL                 0x8138
-		#define ETHERTYPE_IPV6                   0x86DD
-		#define ETHERTYPE_COBRANET               0x8819
-		#define ETHERTYPE_PROVIDERBRIDGING       0x88a8
-		#define ETHERTYPE_MPLSUNICAST            0x8847
-		#define ETHERTYPE_MPLSMULTICAST          0x8848
-		#define ETHERTYPE_PPPoEDISCOVERY         0x8863
-		#define ETHERTYPE_PPPoESESSION           0x8864
-		#define ETHERTYPE_EAPOVERLAN             0x888E
-		#define ETHERTYPE_HYPERSCSI              0x889A
-		#define ETHERTYPE_ATAOVERETHERNET        0x88A2
-		#define ETHERTYPE_ETHERCAT               0x88A4
-		#define ETHERTYPE_SERCOSIII              0x88CD
-		#define ETHERTYPE_CESoE                  0x88D8
-		#define ETHERTYPE_MACSECURITY            0x88E5
-		#define ETHERTYPE_FIBRECHANNEL           0x8906
-		#define ETHERTYPE_QINQ                   0x9100
-		#define ETHERTYPE_VLLT                   0xCAFE
-
-		#define PROTOCOL_ICMP                    1
-		#define PROTOCOL_IGMP                    2
-		#define PROTOCOL_TCP                     6
-		#define PROTOCOL_UDP                     17
-		#define PROTOCOL_OSPF                    89
-		#define PROTOCOL_SCTP                    132
-
-	/* Type Defines: */
-		/** Type define for a physical MAC address of a device on a network. */
-		typedef struct
-		{
-			uint8_t       Octets[6]; /**< Individual bytes of a MAC address */
-		} RNDIS_MAC_Address_t;
-
-		/** Type define for a protocol IP address of a device on a network. */
-		typedef struct
-		{
-			uint8_t       Octets[4]; /**< Individual bytes of an IP address */
-		} IP_Address_t;
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.c
deleted file mode 100644
index 90eae2c954..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Internet Control Message Protocol (ICMP) packet handling routines. This protocol handles
- *  Echo requests from the host, to indicate a successful network connection between the host
- *  and the virtual server.
- */
-
-#include "ICMP.h"
-
-/** Processes an ICMP packet inside an Ethernet frame, and writes the appropriate response
- *  to the output Ethernet frame if the host is issuing a ICMP ECHO request.
- *
- *  \param[in] InDataStart    Pointer to the start of the incoming packet's ICMP header
- *  \param[out] OutDataStart  Pointer to the start of the outgoing packet's ICMP header
- *
- *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
- */
-int16_t ICMP_ProcessICMPPacket(void* InDataStart,
-                               void* OutDataStart)
-{
-	ICMP_Header_t* ICMPHeaderIN  = (ICMP_Header_t*)InDataStart;
-	ICMP_Header_t* ICMPHeaderOUT = (ICMP_Header_t*)OutDataStart;
-
-	DecodeICMPHeader(InDataStart);
-
-	/* Determine if the ICMP packet is an echo request (ping) */
-	if (ICMPHeaderIN->Type == ICMP_TYPE_ECHOREQUEST)
-	{
-		/* Fill out the ICMP response packet */
-		ICMPHeaderOUT->Type     = ICMP_TYPE_ECHOREPLY;
-		ICMPHeaderOUT->Code     = 0;
-		ICMPHeaderOUT->Checksum = 0;
-		ICMPHeaderOUT->Id       = ICMPHeaderIN->Id;
-		ICMPHeaderOUT->Sequence = ICMPHeaderIN->Sequence;
-
-		intptr_t DataSize = FrameIN.FrameLength - ((((intptr_t)InDataStart + sizeof(ICMP_Header_t)) - (intptr_t)FrameIN.FrameData));
-
-		/* Copy the remaining payload to the response - echo requests should echo back any sent data */
-		memmove(&((uint8_t*)OutDataStart)[sizeof(ICMP_Header_t)],
-		        &((uint8_t*)InDataStart)[sizeof(ICMP_Header_t)],
-			    DataSize);
-
-		ICMPHeaderOUT->Checksum = Ethernet_Checksum16(ICMPHeaderOUT, (DataSize + sizeof(ICMP_Header_t)));
-
-		/* Return the size of the response so far */
-		return (DataSize + sizeof(ICMP_Header_t));
-	}
-
-	return NO_RESPONSE;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.h
deleted file mode 100644
index 20322ad982..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ICMP.c.
- */
-
-#ifndef _ICMP_H_
-#define _ICMP_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <string.h>
-
-		#include "EthernetProtocols.h"
-		#include "Ethernet.h"
-		#include "ProtocolDecoders.h"
-
-	/* Macros: */
-		/** ICMP message type constant, indicating an ICMP ECHO Reply message. */
-		#define ICMP_TYPE_ECHOREPLY              0
-
-		/** ICMP message type constant, indicating a packet destination is unreachable. */
-		#define ICMP_TYPE_DESTINATIONUNREACHABLE 3
-
-		/** ICMP message type constant, indicating an ICMP Source Quench message. */
-		#define ICMP_TYPE_SOURCEQUENCH           4
-
-		/** ICMP message type constant, indicating an ICMP Redirect message. */
-		#define ICMP_TYPE_REDIRECTMESSAGE        5
-
-		/** ICMP message type constant, indicating an ICMP ECHO Request message. */
-		#define ICMP_TYPE_ECHOREQUEST            8
-
-		/** ICMP message type constant, indicating an ICMP Time Exceeded message. */
-		#define ICMP_TYPE_TIMEEXCEEDED           11
-
-	/* Type Defines: */
-		/** Type define for an ICMP message header. */
-		typedef struct
-		{
-			uint8_t       Type; /**< ICMP message type, an \c ICMP_TYPE_* constant */
-			uint8_t       Code; /**< ICMP message code, indicating the message value */
-			uint16_t      Checksum; /**< Ethernet checksum of the ICMP message */
-			uint16_t      Id; /**< Id of the ICMP message */
-			uint16_t      Sequence; /**< Sequence number of the ICMP message, to link together message responses */
-		} ICMP_Header_t;
-
-	/* Function Prototypes: */
-		int16_t ICMP_ProcessICMPPacket(void* InDataStart,
-		                               void* OutDataStart);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.c
deleted file mode 100644
index 16f97d0571..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Internet Protocol (IP) packet handling routines. This protocol handles IP packets from the
- *  host which typically encapsulate other protocols such as ICMP, UDP and TCP.
- */
-
-#include "IP.h"
-
-/** Processes an IP packet inside an Ethernet frame, and writes the appropriate response
- *  to the output Ethernet frame if one is created by a sub-protocol handler.
- *
- *  \param[in] InDataStart    Pointer to the start of the incoming packet's IP header
- *  \param[out] OutDataStart  Pointer to the start of the outgoing packet's IP header
- *
- *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE if no
- *           response was generated, NO_PROCESS if the packet processing was deferred until the
- *           next Ethernet packet handler iteration
- */
-int16_t IP_ProcessIPPacket(void* InDataStart,
-                           void* OutDataStart)
-{
-	DecodeIPHeader(InDataStart);
-
-	IP_Header_t* IPHeaderIN  = (IP_Header_t*)InDataStart;
-	IP_Header_t* IPHeaderOUT = (IP_Header_t*)OutDataStart;
-
-	/* Header length is specified in number of longs in the packet header, convert to bytes */
-	uint16_t HeaderLengthBytes = (IPHeaderIN->HeaderLength * sizeof(uint32_t));
-
-	int16_t  RetSize = NO_RESPONSE;
-
-	/* Check to ensure the IP packet is addressed to the virtual webserver's IP or the broadcast IP address */
-	if (!(IP_COMPARE(&IPHeaderIN->DestinationAddress, &ServerIPAddress)) &&
-	    !(IP_COMPARE(&IPHeaderIN->DestinationAddress, &BroadcastIPAddress)))
-	{
-		return NO_RESPONSE;
-	}
-
-	/* Pass off the IP payload to the appropriate protocol processing routine */
-	switch (IPHeaderIN->Protocol)
-	{
-		case PROTOCOL_ICMP:
-			RetSize = ICMP_ProcessICMPPacket(&((uint8_t*)InDataStart)[HeaderLengthBytes],
-			                                 &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]);
-			break;
-		case PROTOCOL_TCP:
-			RetSize = TCP_ProcessTCPPacket(InDataStart,
-			                               &((uint8_t*)InDataStart)[HeaderLengthBytes],
-			                               &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]);
-			break;
-		case PROTOCOL_UDP:
-			RetSize = UDP_ProcessUDPPacket(InDataStart,
-			                               &((uint8_t*)InDataStart)[HeaderLengthBytes],
-			                               &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]);
-			break;
-	}
-
-	/* Check to see if the protocol processing routine has filled out a response */
-	if (RetSize > 0)
-	{
-		/* Fill out the response IP packet header */
-		IPHeaderOUT->TotalLength        = SwapEndian_16(sizeof(IP_Header_t) + RetSize);
-		IPHeaderOUT->TypeOfService      = 0;
-		IPHeaderOUT->HeaderLength       = (sizeof(IP_Header_t) / sizeof(uint32_t));
-		IPHeaderOUT->Version            = 4;
-		IPHeaderOUT->Flags              = 0;
-		IPHeaderOUT->FragmentOffset     = 0;
-		IPHeaderOUT->Identification     = 0;
-		IPHeaderOUT->HeaderChecksum     = 0;
-		IPHeaderOUT->Protocol           = IPHeaderIN->Protocol;
-		IPHeaderOUT->TTL                = DEFAULT_TTL;
-		IPHeaderOUT->SourceAddress      = IPHeaderIN->DestinationAddress;
-		IPHeaderOUT->DestinationAddress = IPHeaderIN->SourceAddress;
-
-		IPHeaderOUT->HeaderChecksum     = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t));
-
-		/* Return the size of the response so far */
-		return (sizeof(IP_Header_t) + RetSize);
-	}
-
-	return RetSize;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h
deleted file mode 100644
index d67e1785bd..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for IP.c.
- */
-
-#ifndef _IP_H_
-#define _IP_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <string.h>
-
-		#include "EthernetProtocols.h"
-		#include "Ethernet.h"
-		#include "ProtocolDecoders.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Protocol IP address of the broadcast address. */
-		#define BROADCAST_IP_ADDRESS             {0xFF, 0xFF, 0xFF, 0xFF}
-
-		/** Default Time To Live (TTL) value for sent packets, indicating the maximum allowable hops until their destination
-		 *  is reached.
-		 */
-		#define DEFAULT_TTL                      128
-
-		/** Performs a comparison between two IP addresses, indicating if they are identical.
-		 *
-		 *  \param[in] IP1  First IP address
-		 *  \param[in] IP2  Second IP address
-		 *
-		 *  \return True if the addresses match, \c false otherwise
-		 */
-		#define IP_COMPARE(IP1, IP2)             (memcmp(IP1, IP2, sizeof(IP_Address_t)) == 0)
-
-	/* Type Defines: */
-		/** Type define of an IP packet header. */
-		typedef struct
-		{
-			unsigned     HeaderLength   : 4; /**< Total length of the packet header, in 4-byte blocks */
-			unsigned     Version        : 4; /**< IP protocol version */
-			uint8_t      TypeOfService; /**< Special service type identifier, indicating delay/throughput/reliability levels */
-			uint16_t     TotalLength; /**< Total length of the IP packet, in bytes */
-
-			uint16_t     Identification; /**< Identification value for identifying fragmented packets */
-			unsigned     FragmentOffset : 13; /**< Offset of this IP fragment */
-			unsigned     Flags          : 3; /**< Fragment flags, to indicate if a packet is fragmented */
-
-			uint8_t      TTL; /**< Maximum allowable number of hops to reach the packet destination */
-			uint8_t      Protocol; /**< Encapsulated protocol type */
-			uint16_t     HeaderChecksum; /**< Ethernet checksum of the IP header */
-
-			IP_Address_t SourceAddress; /**< Source protocol IP address of the packet */
-			IP_Address_t DestinationAddress; /**< Destination protocol IP address of the packet */
-		} IP_Header_t;
-
-	/* Function Prototypes: */
-		int16_t IP_ProcessIPPacket(void* InDataStart,
-		                           void* OutDataStart);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.c
deleted file mode 100644
index b297ea76fa..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/* Protocol decoders for Ethernet, TCP, IP, ICMP and ARP. Each of these routines
-   accepts a header to the appropriate protocol and prints out pertinent information
-   on the packet through the serial port.
-
-   To disable printing of a specific protocol, define the token NO_DECODE_{Protocol}
-   in the project makefile, and pass it to the compiler using the -D switch.
-*/
-
-/** \file
- *
- *  Protocol decoding routines, for the plain-text decoding of Ethernet frames for debugging purposes.
- *  Enabled protocol decoders will print incoming Ethernet frame contents through the USART in a human
- *  readable format.
- *
- *  Note that the USART is a slow transmission medium, and will slow down packet processing considerably.
- *  Packet decoding routines can be disabled by defining NO_DECODE_{Protocol Name} in the project makefile
- *  and passing it to the compiler via the -D switch.
- */
-
-#include "ProtocolDecoders.h"
-
-/** Decodes an Ethernet frame header and prints its contents to through the USART in a human readable format.
- *
- *  \param[in] InDataStart  Pointer to the start of an Ethernet frame header
- */
-void DecodeEthernetFrameHeader(void* InDataStart)
-{
-	#if !defined(NO_DECODE_ETHERNET)
-	Ethernet_Frame_Header_t* FrameHeader = (Ethernet_Frame_Header_t*)InDataStart;
-
-	printf_P(PSTR("\r\n"));
-
-	printf_P(PSTR("  ETHERNET\r\n"));
-
-	if (!(MAC_COMPARE(&FrameHeader->Destination, &ServerMACAddress)) &&
-	    !(MAC_COMPARE(&FrameHeader->Destination, &BroadcastMACAddress)))
-	{
-		printf_P(PSTR("  + NOT ADDRESSED TO DEVICE\r\n"));
-		return;
-	}
-
-	printf_P(PSTR("  + MAC Source : %02X:%02X:%02X:%02X:%02X:%02X\r\n"), FrameHeader->Source.Octets[0],
-	                                                                     FrameHeader->Source.Octets[1],
-	                                                                     FrameHeader->Source.Octets[2],
-	                                                                     FrameHeader->Source.Octets[3],
-	                                                                     FrameHeader->Source.Octets[4],
-	                                                                     FrameHeader->Source.Octets[5]);
-
-	printf_P(PSTR("  + MAC Dest: %02X:%02X:%02X:%02X:%02X:%02X\r\n"),    FrameHeader->Destination.Octets[0],
-	                                                                     FrameHeader->Destination.Octets[1],
-	                                                                     FrameHeader->Destination.Octets[2],
-	                                                                     FrameHeader->Destination.Octets[3],
-	                                                                     FrameHeader->Destination.Octets[4],
-	                                                                     FrameHeader->Destination.Octets[5]);
-
-	printf_P(PSTR("  + Protocol: 0x%04x\r\n"), SwapEndian_16(FrameHeader->EtherType));
-	#endif
-}
-
-/** Decodes an ARP header and prints its contents to through the USART in a human readable format.
- *
- *  \param[in] InDataStart  Pointer to the start of an ARP packet header
- */
-void DecodeARPHeader(void* InDataStart)
-{
-	#if !defined(NO_DECODE_ARP)
-	ARP_Header_t* ARPHeader = (ARP_Header_t*)InDataStart;
-
-	printf_P(PSTR("   \\\r\n    ARP\r\n"));
-
-	if (!(IP_COMPARE(&ARPHeader->TPA, &ServerIPAddress)) &&
-	    !(MAC_COMPARE(&ARPHeader->THA, &ServerMACAddress)))
-	{
-		printf_P(PSTR("    + NOT ADDRESSED TO DEVICE\r\n"));
-		return;
-	}
-
-	printf_P(PSTR("    + Protocol: %x\r\n"), SwapEndian_16(ARPHeader->ProtocolType));
-	printf_P(PSTR("    + Operation: %u\r\n"), SwapEndian_16(ARPHeader->Operation));
-
-	if (SwapEndian_16(ARPHeader->ProtocolType) == ETHERTYPE_IPV4)
-	{
-		printf_P(PSTR("    + SHA MAC: %02X:%02X:%02X:%02X:%02X:%02X\r\n"), ARPHeader->SHA.Octets[0],
-		                                                                   ARPHeader->SHA.Octets[1],
-		                                                                   ARPHeader->SHA.Octets[2],
-		                                                                   ARPHeader->SHA.Octets[3],
-		                                                                   ARPHeader->SHA.Octets[4],
-		                                                                   ARPHeader->SHA.Octets[5]);
-
-		printf_P(PSTR("    + SPA IP: %u.%u.%u.%u\r\n"), ARPHeader->SPA.Octets[0],
-		                                                ARPHeader->SPA.Octets[1],
-		                                                ARPHeader->SPA.Octets[2],
-		                                                ARPHeader->SPA.Octets[3]);
-
-		printf_P(PSTR("    + THA MAC: %02X:%02X:%02X:%02X:%02X:%02X\r\n"), ARPHeader->THA.Octets[0],
-		                                                                   ARPHeader->THA.Octets[1],
-		                                                                   ARPHeader->THA.Octets[2],
-		                                                                   ARPHeader->THA.Octets[3],
-		                                                                   ARPHeader->THA.Octets[4],
-		                                                                   ARPHeader->THA.Octets[5]);
-
-		printf_P(PSTR("    + TPA IP: %u.%u.%u.%u\r\n"), ARPHeader->TPA.Octets[0],
-		                                                ARPHeader->TPA.Octets[1],
-		                                                ARPHeader->TPA.Octets[2],
-		                                                ARPHeader->TPA.Octets[3]);
-	}
-	#endif
-}
-
-/** Decodes an IP header and prints its contents to through the USART in a human readable format.
- *
- *  \param[in] InDataStart  Pointer to the start of an IP packet header
- */
-void DecodeIPHeader(void* InDataStart)
-{
-	#if !defined(NO_DECODE_IP)
-	IP_Header_t* IPHeader  = (IP_Header_t*)InDataStart;
-
-	uint16_t HeaderLengthBytes = (IPHeader->HeaderLength * sizeof(uint32_t));
-
-	printf_P(PSTR("   \\\r\n    IP\r\n"));
-
-	if (!(IP_COMPARE(&IPHeader->DestinationAddress, &ServerIPAddress)))
-	{
-		printf_P(PSTR("    + NOT ADDRESSED TO DEVICE\r\n"));
-		return;
-	}
-
-	printf_P(PSTR("    + Header Length: %u Bytes\r\n"), HeaderLengthBytes);
-	printf_P(PSTR("    + Packet Version: %u\r\n"), IPHeader->Version);
-	printf_P(PSTR("    + Total Length: %u\r\n"), SwapEndian_16(IPHeader->TotalLength));
-
-	printf_P(PSTR("    + Protocol: %u\r\n"), IPHeader->Protocol);
-	printf_P(PSTR("    + TTL: %u\r\n"), IPHeader->TTL);
-
-	printf_P(PSTR("    + IP Src: %u.%u.%u.%u\r\n"), IPHeader->SourceAddress.Octets[0],
-	                                                IPHeader->SourceAddress.Octets[1],
-	                                                IPHeader->SourceAddress.Octets[2],
-	                                                IPHeader->SourceAddress.Octets[3]);
-
-	printf_P(PSTR("    + IP Dst: %u.%u.%u.%u\r\n"), IPHeader->DestinationAddress.Octets[0],
-	                                                IPHeader->DestinationAddress.Octets[1],
-	                                                IPHeader->DestinationAddress.Octets[2],
-	                                                IPHeader->DestinationAddress.Octets[3]);
-	#endif
-}
-
-/** Decodes an ICMP header and prints its contents to through the USART in a human readable format.
- *
- *  \param[in] InDataStart  Pointer to the start of an ICMP packet header
- */
-void DecodeICMPHeader(void* InDataStart)
-{
-	#if !defined(NO_DECODE_ICMP)
-	ICMP_Header_t* ICMPHeader  = (ICMP_Header_t*)InDataStart;
-
-	printf_P(PSTR("    \\\r\n     ICMP\r\n"));
-
-	printf_P(PSTR("     + Type: %u\r\n"), ICMPHeader->Type);
-	printf_P(PSTR("     + Code: %u\r\n"), ICMPHeader->Code);
-	#endif
-}
-
-/** Decodes a TCP header and prints its contents to through the USART in a human readable format.
- *
- *  \param[in] InDataStart  Pointer to the start of a TCP packet header
- */
-void DecodeTCPHeader(void* InDataStart)
-{
-	#if !defined(NO_DECODE_TCP)
-	TCP_Header_t* TCPHeader  = (TCP_Header_t*)InDataStart;
-
-	uint16_t               HeaderLengthBytes = (TCPHeader->DataOffset * sizeof(uint32_t));
-
-	printf_P(PSTR("    \\\r\n     TCP\r\n"));
-
-	printf_P(PSTR("     + Header Length: %u Bytes\r\n"), HeaderLengthBytes);
-
-	printf_P(PSTR("     + Source Port: %u\r\n"), SwapEndian_16(TCPHeader->SourcePort));
-	printf_P(PSTR("     + Destination Port: %u\r\n"), SwapEndian_16(TCPHeader->DestinationPort));
-
-	printf_P(PSTR("     + Sequence Number: %lu\r\n"), SwapEndian_32(TCPHeader->SequenceNumber));
-	printf_P(PSTR("     + Acknowledgment Number: %lu\r\n"), SwapEndian_32(TCPHeader->AcknowledgmentNumber));
-
-	printf_P(PSTR("     + Flags: 0x%02X\r\n"), TCPHeader->Flags);
-
-	if (TCP_GetPortState(TCPHeader->DestinationPort) == TCP_Port_Closed)
-	  printf_P(PSTR("     + NOT LISTENING ON DESTINATION PORT\r\n"));
-	#endif
-}
-
-/** Decodes an UDP header and prints its contents to through the USART in a human readable format.
- *
- *  \param[in] InDataStart  Pointer to the start of a UDP packet header
- */
-void DecodeUDPHeader(void* InDataStart)
-{
-	#if !defined(NO_DECODE_UDP)
-	UDP_Header_t* UDPHeader = (UDP_Header_t*)InDataStart;
-
-	printf_P(PSTR("    \\\r\n     UDP\r\n"));
-
-	printf_P(PSTR("     + Source Port: %u\r\n"), SwapEndian_16(UDPHeader->SourcePort));
-	printf_P(PSTR("     + Destination Port: %u\r\n"), SwapEndian_16(UDPHeader->DestinationPort));
-
-	printf_P(PSTR("     + Data Length: %d\r\n"), SwapEndian_16(UDPHeader->Length));
-	#endif
-}
-
-/** Decodes an DHCP header and prints its contents to through the USART in a human readable format.
- *
- *  \param[in] InDataStart  Pointer to the start of a DHCP packet header
- */
-void DecodeDHCPHeader(void* InDataStart)
-{
-	#if !defined(NO_DECODE_DHCP)
-	uint8_t* DHCPOptions = (InDataStart + sizeof(DHCP_Header_t));
-
-	printf_P(PSTR("     \\\r\n      DHCP\r\n"));
-
-	while (DHCPOptions[0] != DHCP_OPTION_END)
-	{
-		if (DHCPOptions[0] == DHCP_OPTION_MESSAGETYPE)
-		{
-			switch (DHCPOptions[2])
-			{
-				case DHCP_MESSAGETYPE_DISCOVER:
-					printf_P(PSTR("      + DISCOVER\r\n"));
-					break;
-				case DHCP_MESSAGETYPE_REQUEST:
-					printf_P(PSTR("      + REQUEST\r\n"));
-					break;
-				case DHCP_MESSAGETYPE_RELEASE:
-					printf_P(PSTR("      + RELEASE\r\n"));
-					break;
-				case DHCP_MESSAGETYPE_DECLINE:
-					printf_P(PSTR("      + DECLINE\r\n"));
-					break;
-			}
-		}
-
-		DHCPOptions += ((DHCPOptions[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptions[1] + 2));
-	}
-	#endif
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h
deleted file mode 100644
index 6a7d201953..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ProtocolDecoders.c.
- */
-
-#ifndef _PROTOCOL_DECODERS_H_
-#define _PROTOCOL_DECODERS_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/pgmspace.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-
-		#include "EthernetProtocols.h"
-		#include "Ethernet.h"
-		#include "Config/AppConfig.h"
-
-	/* Function Prototypes: */
-		void DecodeEthernetFrameHeader(void* InDataStart);
-		void DecodeARPHeader(void* InDataStart);
-		void DecodeIPHeader(void* InDataStart);
-		void DecodeICMPHeader(void* InDataStart);
-		void DecodeTCPHeader(void* InDataStart);
-		void DecodeUDPHeader(void* InDataStart);
-		void DecodeDHCPHeader(void* InDataStart);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.c
deleted file mode 100644
index 751f0d9ab6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.c
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  RNDIS command handler functions. This handles RNDIS commands according to
- *  the Microsoft RNDIS specification, creating a USB Ethernet network adapter.
- */
-
-#define  INCLUDE_FROM_RNDIS_C
-#include "RNDIS.h"
-
-/** Physical MAC address of the network adapter, which becomes the MAC address of the host for packets sent to the adapter. */
-static const MAC_Address_t PROGMEM AdapterMACAddress     = {ADAPTER_MAC_ADDRESS};
-
-/** Vendor description of the adapter. This is overridden by the INF file required to install the appropriate RNDIS drivers for
- *  the device, but may still be used by the OS in some circumstances.
- */
-static const char PROGMEM AdapterVendorDescription[]     = "LUFA RNDIS Adapter";
-
-/** List of RNDIS OID commands supported by this adapter. */
-static const uint32_t PROGMEM AdapterSupportedOIDList[]  =
-							{
-								OID_GEN_SUPPORTED_LIST,
-								OID_GEN_PHYSICAL_MEDIUM,
-								OID_GEN_HARDWARE_STATUS,
-								OID_GEN_MEDIA_SUPPORTED,
-								OID_GEN_MEDIA_IN_USE,
-								OID_GEN_MAXIMUM_FRAME_SIZE,
-								OID_GEN_MAXIMUM_TOTAL_SIZE,
-								OID_GEN_LINK_SPEED,
-								OID_GEN_TRANSMIT_BLOCK_SIZE,
-								OID_GEN_RECEIVE_BLOCK_SIZE,
-								OID_GEN_VENDOR_ID,
-								OID_GEN_VENDOR_DESCRIPTION,
-								OID_GEN_CURRENT_PACKET_FILTER,
-								OID_GEN_MAXIMUM_TOTAL_SIZE,
-								OID_GEN_MEDIA_CONNECT_STATUS,
-								OID_GEN_XMIT_OK,
-								OID_GEN_RCV_OK,
-								OID_GEN_XMIT_ERROR,
-								OID_GEN_RCV_ERROR,
-								OID_GEN_RCV_NO_BUFFER,
-								OID_802_3_PERMANENT_ADDRESS,
-								OID_802_3_CURRENT_ADDRESS,
-								OID_802_3_MULTICAST_LIST,
-								OID_802_3_MAXIMUM_LIST_SIZE,
-								OID_802_3_RCV_ERROR_ALIGNMENT,
-								OID_802_3_XMIT_ONE_COLLISION,
-								OID_802_3_XMIT_MORE_COLLISIONS,
-							};
-
-/** Buffer for RNDIS messages (as distinct from Ethernet frames sent through the adapter. This must be big enough to hold the entire
- *  Supported OID list, plus the response header. The buffer is half-duplex, and is written to as it is read to save on SRAM - for this
- *  reason, care must be taken when constructing RNDIS responses that unread data is not overwritten when writing in responses.
- */
-uint8_t                 RNDISMessageBuffer[sizeof(AdapterSupportedOIDList) + sizeof(RNDIS_Query_Complete_t)];
-
-/** Pointer to the RNDIS message header at the top of the RNDIS message buffer, for convenience. */
-RNDIS_Message_Header_t* MessageHeader = (RNDIS_Message_Header_t*)&RNDISMessageBuffer;
-
-/** Indicates if a RNDIS message response is ready to be sent back to the host. */
-bool                    ResponseReady               = false;
-
-/** Current RNDIS adapter state, a value from the \c RNDIS_States_t enum. */
-uint8_t                 CurrRNDISState              = RNDIS_Uninitialized;
-
-/** Current Ethernet packet filter mask. This is non-zero when the adapter is initialized, or zero when disabled. */
-uint32_t                CurrPacketFilter            = 0;
-
-
-/** Processes the RNDIS message received by the host and stored in the RNDISMessageBuffer global buffer. If a response is
- *  created, the ResponseReady global is updated so that the response is written back to the host upon request.
- */
-void ProcessRNDISControlMessage(void)
-{
-	/* Note: Only a single buffer is used for both the received message and its response to save SRAM. Because of
-	         this, response bytes should be filled in order so that they do not clobber unread data in the buffer. */
-
-	switch (MessageHeader->MessageType)
-	{
-		case REMOTE_NDIS_INITIALIZE_MSG:
-			/* Initialize the adapter - return information about the supported RNDIS version and buffer sizes */
-
-			ResponseReady = true;
-
-			RNDIS_Initialize_Message_t*  INITIALIZE_Message  = (RNDIS_Initialize_Message_t*)&RNDISMessageBuffer;
-			RNDIS_Initialize_Complete_t* INITIALIZE_Response = (RNDIS_Initialize_Complete_t*)&RNDISMessageBuffer;
-
-			INITIALIZE_Response->MessageType           = REMOTE_NDIS_INITIALIZE_CMPLT;
-			INITIALIZE_Response->MessageLength         = sizeof(RNDIS_Initialize_Complete_t);
-			INITIALIZE_Response->RequestId             = INITIALIZE_Message->RequestId;
-			INITIALIZE_Response->Status                = REMOTE_NDIS_STATUS_SUCCESS;
-
-			INITIALIZE_Response->MajorVersion          = REMOTE_NDIS_VERSION_MAJOR;
-			INITIALIZE_Response->MinorVersion          = REMOTE_NDIS_VERSION_MINOR;
-			INITIALIZE_Response->DeviceFlags           = REMOTE_NDIS_DF_CONNECTIONLESS;
-			INITIALIZE_Response->Medium                = REMOTE_NDIS_MEDIUM_802_3;
-			INITIALIZE_Response->MaxPacketsPerTransfer = 1;
-			INITIALIZE_Response->MaxTransferSize       = (sizeof(RNDIS_Packet_Message_t) + ETHERNET_FRAME_SIZE_MAX);
-			INITIALIZE_Response->PacketAlignmentFactor = 0;
-			INITIALIZE_Response->AFListOffset          = 0;
-			INITIALIZE_Response->AFListSize            = 0;
-
-			CurrRNDISState = RNDIS_Initialized;
-
-			break;
-		case REMOTE_NDIS_HALT_MSG:
-			/* Halt the adapter, reset the adapter state - note that no response should be returned when completed */
-
-			ResponseReady = false;
-			MessageHeader->MessageLength = 0;
-
-			CurrRNDISState = RNDIS_Uninitialized;
-
-			break;
-		case REMOTE_NDIS_QUERY_MSG:
-			/* Request for information about a parameter about the adapter, specified as an OID token */
-
-			ResponseReady = true;
-
-			RNDIS_Query_Message_t*  QUERY_Message  = (RNDIS_Query_Message_t*)&RNDISMessageBuffer;
-			RNDIS_Query_Complete_t* QUERY_Response = (RNDIS_Query_Complete_t*)&RNDISMessageBuffer;
-			uint32_t                Query_Oid      = QUERY_Message->Oid;
-
-			void*     QueryData                 = &RNDISMessageBuffer[sizeof(RNDIS_Message_Header_t) +
-			                                                          QUERY_Message->InformationBufferOffset];
-			void*     ResponseData              = &RNDISMessageBuffer[sizeof(RNDIS_Query_Complete_t)];
-			uint16_t  ResponseSize;
-
-			QUERY_Response->MessageType         = REMOTE_NDIS_QUERY_CMPLT;
-			QUERY_Response->MessageLength       = sizeof(RNDIS_Query_Complete_t);
-
-			if (ProcessNDISQuery(Query_Oid, QueryData, QUERY_Message->InformationBufferLength,
-			                     ResponseData, &ResponseSize))
-			{
-				QUERY_Response->Status                  = REMOTE_NDIS_STATUS_SUCCESS;
-				QUERY_Response->MessageLength          += ResponseSize;
-
-				QUERY_Response->InformationBufferLength = ResponseSize;
-				QUERY_Response->InformationBufferOffset = (sizeof(RNDIS_Query_Complete_t) - sizeof(RNDIS_Message_Header_t));
-			}
-			else
-			{
-				QUERY_Response->Status                  = REMOTE_NDIS_STATUS_NOT_SUPPORTED;
-
-				QUERY_Response->InformationBufferLength = 0;
-				QUERY_Response->InformationBufferOffset = 0;
-			}
-
-			break;
-		case REMOTE_NDIS_SET_MSG:
-			/* Request to set a parameter of the adapter, specified as an OID token */
-
-			ResponseReady = true;
-
-			RNDIS_Set_Message_t*  SET_Message  = (RNDIS_Set_Message_t*)&RNDISMessageBuffer;
-			RNDIS_Set_Complete_t* SET_Response = (RNDIS_Set_Complete_t*)&RNDISMessageBuffer;
-			uint32_t              SET_Oid      = SET_Message->Oid;
-
-			SET_Response->MessageType       = REMOTE_NDIS_SET_CMPLT;
-			SET_Response->MessageLength     = sizeof(RNDIS_Set_Complete_t);
-			SET_Response->RequestId         = SET_Message->RequestId;
-
-			void* SetData                   = &RNDISMessageBuffer[sizeof(RNDIS_Message_Header_t) +
-			                                                      SET_Message->InformationBufferOffset];
-
-			if (ProcessNDISSet(SET_Oid, SetData, SET_Message->InformationBufferLength))
-			  SET_Response->Status        = REMOTE_NDIS_STATUS_SUCCESS;
-			else
-			  SET_Response->Status        = REMOTE_NDIS_STATUS_NOT_SUPPORTED;
-
-			break;
-		case REMOTE_NDIS_RESET_MSG:
-			/* Soft reset the adapter */
-
-			ResponseReady = true;
-
-			RNDIS_Reset_Complete_t* RESET_Response = (RNDIS_Reset_Complete_t*)&RNDISMessageBuffer;
-
-			RESET_Response->MessageType         = REMOTE_NDIS_RESET_CMPLT;
-			RESET_Response->MessageLength       = sizeof(RNDIS_Reset_Complete_t);
-			RESET_Response->Status              = REMOTE_NDIS_STATUS_SUCCESS;
-			RESET_Response->AddressingReset     = 0;
-
-			break;
-		case REMOTE_NDIS_KEEPALIVE_MSG:
-			/* Keep alive message sent to the adapter every 5 seconds when idle to ensure it is still responding */
-
-			ResponseReady = true;
-
-			RNDIS_KeepAlive_Message_t*  KEEPALIVE_Message  = (RNDIS_KeepAlive_Message_t*)&RNDISMessageBuffer;
-			RNDIS_KeepAlive_Complete_t* KEEPALIVE_Response = (RNDIS_KeepAlive_Complete_t*)&RNDISMessageBuffer;
-
-			KEEPALIVE_Response->MessageType     = REMOTE_NDIS_KEEPALIVE_CMPLT;
-			KEEPALIVE_Response->MessageLength   = sizeof(RNDIS_KeepAlive_Complete_t);
-			KEEPALIVE_Response->RequestId       = KEEPALIVE_Message->RequestId;
-			KEEPALIVE_Response->Status          = REMOTE_NDIS_STATUS_SUCCESS;
-
-			break;
-	}
-}
-
-/** Processes RNDIS query commands, retrieving information from the adapter and reporting it back to the host. The requested
- *  parameter is given as an OID value.
- *
- *  \param[in] OId            OId value of the parameter being queried
- *  \param[in] QueryData      Pointer to any extra query data being sent by the host to the device inside the RNDIS message buffer
- *  \param[in] QuerySize      Size in bytes of the extra query data being sent by the host
- *  \param[out] ResponseData  Pointer to the start of the query response inside the RNDIS message buffer
- *  \param[out] ResponseSize  Pointer to the size in bytes of the response data being sent to the host
- *
- *  \return Boolean \c true if the query was handled, \c false otherwise
- */
-static bool ProcessNDISQuery(const uint32_t OId, void* QueryData, uint16_t QuerySize,
-                             void* ResponseData, uint16_t* ResponseSize)
-{
-	/* Handler for REMOTE_NDIS_QUERY_MSG messages */
-
-	switch (OId)
-	{
-		case OID_GEN_SUPPORTED_LIST:
-			*ResponseSize = sizeof(AdapterSupportedOIDList);
-
-			/* Copy the list of supported NDIS OID tokens to the response buffer */
-			memcpy_P(ResponseData, AdapterSupportedOIDList, sizeof(AdapterSupportedOIDList));
-
-			return true;
-		case OID_GEN_PHYSICAL_MEDIUM:
-			*ResponseSize = sizeof(uint32_t);
-
-			/* Indicate that the device is a true ethernet link */
-			*((uint32_t*)ResponseData) = 0;
-
-			return true;
-		case OID_GEN_HARDWARE_STATUS:
-			*ResponseSize = sizeof(uint32_t);
-
-			/* Always indicate hardware ready */
-			*((uint32_t*)ResponseData) = NDIS_HardwareStatus_Ready;
-
-			return true;
-		case OID_GEN_MEDIA_SUPPORTED:
-		case OID_GEN_MEDIA_IN_USE:
-			*ResponseSize = sizeof(uint32_t);
-
-			/* Indicate 802.3 (Ethernet) supported by the adapter */
-			*((uint32_t*)ResponseData) = REMOTE_NDIS_MEDIUM_802_3;
-
-			return true;
-		case OID_GEN_VENDOR_ID:
-			*ResponseSize = sizeof(uint32_t);
-
-			/* Vendor ID 0x0xFFFFFF is reserved for vendors who have not purchased a NDIS VID */
-			*((uint32_t*)ResponseData) = 0x00FFFFFF;
-
-			return true;
-		case OID_GEN_MAXIMUM_FRAME_SIZE:
-		case OID_GEN_TRANSMIT_BLOCK_SIZE:
-		case OID_GEN_RECEIVE_BLOCK_SIZE:
-			*ResponseSize = sizeof(uint32_t);
-
-			/* Indicate that the maximum frame size is the size of the ethernet frame buffer */
-			*((uint32_t*)ResponseData) = ETHERNET_FRAME_SIZE_MAX;
-
-			return true;
-		case OID_GEN_VENDOR_DESCRIPTION:
-			*ResponseSize = sizeof(AdapterVendorDescription);
-
-			/* Copy vendor description string to the response buffer */
-			memcpy_P(ResponseData, AdapterVendorDescription, sizeof(AdapterVendorDescription));
-
-			return true;
-		case OID_GEN_MEDIA_CONNECT_STATUS:
-			*ResponseSize = sizeof(uint32_t);
-
-			/* Always indicate that the adapter is connected to a network */
-			*((uint32_t*)ResponseData) = REMOTE_NDIS_MEDIA_STATE_CONNECTED;
-
-			return true;
-		case OID_GEN_LINK_SPEED:
-			*ResponseSize = sizeof(uint32_t);
-
-			/* Indicate 10Mb/s link speed */
-			*((uint32_t*)ResponseData) = 100000;
-
-			return true;
-		case OID_802_3_PERMANENT_ADDRESS:
-		case OID_802_3_CURRENT_ADDRESS:
-			*ResponseSize = sizeof(MAC_Address_t);
-
-			/* Copy over the fixed adapter MAC to the response buffer */
-			memcpy_P(ResponseData, &AdapterMACAddress, sizeof(MAC_Address_t));
-
-			return true;
-		case OID_802_3_MAXIMUM_LIST_SIZE:
-			*ResponseSize = sizeof(uint32_t);
-
-			/* Indicate only one multicast address supported */
-			*((uint32_t*)ResponseData) = 1;
-
-			return true;
-		case OID_GEN_CURRENT_PACKET_FILTER:
-			*ResponseSize = sizeof(uint32_t);
-
-			/* Indicate the current packet filter mask */
-			*((uint32_t*)ResponseData) = CurrPacketFilter;
-
-			return true;
-		case OID_GEN_XMIT_OK:
-		case OID_GEN_RCV_OK:
-		case OID_GEN_XMIT_ERROR:
-		case OID_GEN_RCV_ERROR:
-		case OID_GEN_RCV_NO_BUFFER:
-		case OID_802_3_RCV_ERROR_ALIGNMENT:
-		case OID_802_3_XMIT_ONE_COLLISION:
-		case OID_802_3_XMIT_MORE_COLLISIONS:
-			*ResponseSize = sizeof(uint32_t);
-
-			/* Unused statistic OIDs - always return 0 for each */
-			*((uint32_t*)ResponseData) = 0;
-
-			return true;
-		case OID_GEN_MAXIMUM_TOTAL_SIZE:
-			*ResponseSize = sizeof(uint32_t);
-
-			/* Indicate maximum overall buffer (Ethernet frame and RNDIS header) the adapter can handle */
-			*((uint32_t*)ResponseData) = (sizeof(RNDISMessageBuffer) + ETHERNET_FRAME_SIZE_MAX);
-
-			return true;
-		default:
-			return false;
-	}
-}
-
-/** Processes RNDIS set commands, setting adapter parameters to values given by the host. The requested parameter is given
- *  as an OID value.
- *
- *  \param[in] OId      OId value of the parameter being set
- *  \param[in] SetData  Pointer to the parameter value in the RNDIS message buffer
- *  \param[in] SetSize  Size in bytes of the parameter value being sent by the host
- *
- *  \return Boolean \c true if the set was handled, \c false otherwise
- */
-static bool ProcessNDISSet(uint32_t OId, void* SetData, uint16_t SetSize)
-{
-	/* Handler for REMOTE_NDIS_SET_MSG messages */
-
-	switch (OId)
-	{
-		case OID_GEN_CURRENT_PACKET_FILTER:
-			/* Save the packet filter mask in case the host queries it again later */
-			CurrPacketFilter = *((uint32_t*)SetData);
-
-			/* Set the RNDIS state to initialized if the packet filter is non-zero */
-			CurrRNDISState = ((CurrPacketFilter) ? RNDIS_Data_Initialized : RNDIS_Data_Initialized);
-
-			return true;
-		case OID_802_3_MULTICAST_LIST:
-			/* Do nothing - throw away the value from the host as it is unused */
-
-			return true;
-		default:
-			return false;
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h
deleted file mode 100644
index bb54a905e6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for RNDIS.c.
- */
-
-#ifndef _RNDIS_H_
-#define _RNDIS_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <stdbool.h>
-
-		#include "../RNDISEthernet.h"
-		#include "Ethernet.h"
-
-	/* External Variables: */
-		extern uint8_t                 RNDISMessageBuffer[];
-		extern RNDIS_Message_Header_t* MessageHeader;
-		extern bool                    ResponseReady;
-		extern uint8_t                 CurrRNDISState;
-
-	/* Function Prototypes: */
-		void ProcessRNDISControlMessage(void);
-
-		#if defined(INCLUDE_FROM_RNDIS_C)
-			static bool ProcessNDISQuery(const uint32_t OId,
-			                             void* QueryData,
-			                             uint16_t QuerySize,
-			                             void* ResponseData,
-			                             uint16_t* ResponseSize);
-			static bool ProcessNDISSet(const uint32_t OId,
-			                           void* SetData,
-			                           uint16_t SetSize);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.c
deleted file mode 100644
index d7a8e3956d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.c
+++ /dev/null
@@ -1,631 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Transmission Control Protocol (TCP) packet handling routines. This protocol handles the reliable in-order transmission
- *  and reception of packets to and from devices on a network, to "ports" on the device. It is used in situations where data
- *  delivery must be reliable and correct, e.g. HTTP, TELNET and most other non-streaming protocols.
- */
-
-#define  INCLUDE_FROM_TCP_C
-#include "TCP.h"
-
-/** Port state table array. This contains the current status of TCP ports in the device. To save on space, only open ports are
- *  stored - closed ports may be overwritten at any time, and the system will assume any ports not present in the array are closed. This
- *  allows for MAX_OPEN_TCP_PORTS to be less than the number of ports used by the application if desired.
- */
-TCP_PortState_t        PortStateTable[MAX_OPEN_TCP_PORTS];
-
-/** Connection state table array. This contains the current status of TCP connections in the device. To save on space, only active
- *  (non-closed) connections are stored - closed connections may be overwritten at any time, and the system will assume any connections
- *  not present in the array are closed.
- */
-TCP_ConnectionState_t  ConnectionStateTable[MAX_TCP_CONNECTIONS];
-
-
-/** Task to handle the calling of each registered application's callback function, to process and generate TCP packets at the application
- *  level. If an application produces a response, this task constructs the appropriate Ethernet frame and places it into the Ethernet OUT
- *  buffer for later transmission.
- */
-void TCP_Task(void)
-{
-	/* Run each application in sequence, to process incoming and generate outgoing packets */
-	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
-	{
-		/* Find the corresponding port entry in the port table */
-		for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
-		{
-			/* Run the application handler for the port */
-			if ((PortStateTable[PTableEntry].Port  == ConnectionStateTable[CSTableEntry].Port) &&
-			    (PortStateTable[PTableEntry].State == TCP_Port_Open))
-			{
-				PortStateTable[PTableEntry].ApplicationHandler(&ConnectionStateTable[CSTableEntry],
-				                                               &ConnectionStateTable[CSTableEntry].Info.Buffer);
-			}
-		}
-	}
-
-	/* Bail out early if there is already a frame waiting to be sent in the Ethernet OUT buffer */
-	if (FrameOUT.FrameLength)
-	  return;
-
-	/* Send response packets from each application as the TCP packet buffers are filled by the applications */
-	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
-	{
-		/* For each completely received packet, pass it along to the listening application */
-		if ((ConnectionStateTable[CSTableEntry].Info.Buffer.Direction == TCP_PACKETDIR_OUT) &&
-		    (ConnectionStateTable[CSTableEntry].Info.Buffer.Ready))
-		{
-			Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT.FrameData;
-			IP_Header_t*             IPHeaderOUT    = (IP_Header_t*)&FrameOUT.FrameData[sizeof(Ethernet_Frame_Header_t)];
-			TCP_Header_t*            TCPHeaderOUT   = (TCP_Header_t*)&FrameOUT.FrameData[sizeof(Ethernet_Frame_Header_t) +
-			                                                                             sizeof(IP_Header_t)];
-			void*                    TCPDataOUT     = &FrameOUT.FrameData[sizeof(Ethernet_Frame_Header_t) +
-			                                                              sizeof(IP_Header_t) +
-			                                                              sizeof(TCP_Header_t)];
-
-			uint16_t PacketSize = ConnectionStateTable[CSTableEntry].Info.Buffer.Length;
-
-			/* Fill out the TCP data */
-			TCPHeaderOUT->SourcePort           = ConnectionStateTable[CSTableEntry].Port;
-			TCPHeaderOUT->DestinationPort      = ConnectionStateTable[CSTableEntry].RemotePort;
-			TCPHeaderOUT->SequenceNumber       = SwapEndian_32(ConnectionStateTable[CSTableEntry].Info.SequenceNumberOut);
-			TCPHeaderOUT->AcknowledgmentNumber = SwapEndian_32(ConnectionStateTable[CSTableEntry].Info.SequenceNumberIn);
-			TCPHeaderOUT->DataOffset           = (sizeof(TCP_Header_t) / sizeof(uint32_t));
-			TCPHeaderOUT->WindowSize           = SwapEndian_16(TCP_WINDOW_SIZE);
-
-			TCPHeaderOUT->Flags                = TCP_FLAG_ACK;
-			TCPHeaderOUT->UrgentPointer        = 0;
-			TCPHeaderOUT->Checksum             = 0;
-			TCPHeaderOUT->Reserved             = 0;
-
-			memcpy(TCPDataOUT, ConnectionStateTable[CSTableEntry].Info.Buffer.Data, PacketSize);
-
-			ConnectionStateTable[CSTableEntry].Info.SequenceNumberOut += PacketSize;
-
-			TCPHeaderOUT->Checksum             = TCP_Checksum16(TCPHeaderOUT, &ServerIPAddress,
-			                                                    &ConnectionStateTable[CSTableEntry].RemoteAddress,
-			                                                    (sizeof(TCP_Header_t) + PacketSize));
-
-			PacketSize += sizeof(TCP_Header_t);
-
-			/* Fill out the response IP header */
-			IPHeaderOUT->TotalLength        = SwapEndian_16(sizeof(IP_Header_t) + PacketSize);
-			IPHeaderOUT->TypeOfService      = 0;
-			IPHeaderOUT->HeaderLength       = (sizeof(IP_Header_t) / sizeof(uint32_t));
-			IPHeaderOUT->Version            = 4;
-			IPHeaderOUT->Flags              = 0;
-			IPHeaderOUT->FragmentOffset     = 0;
-			IPHeaderOUT->Identification     = 0;
-			IPHeaderOUT->HeaderChecksum     = 0;
-			IPHeaderOUT->Protocol           = PROTOCOL_TCP;
-			IPHeaderOUT->TTL                = DEFAULT_TTL;
-			IPHeaderOUT->SourceAddress      = ServerIPAddress;
-			IPHeaderOUT->DestinationAddress = ConnectionStateTable[CSTableEntry].RemoteAddress;
-
-			IPHeaderOUT->HeaderChecksum     = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t));
-
-			PacketSize += sizeof(IP_Header_t);
-
-			/* Fill out the response Ethernet frame header */
-			FrameOUTHeader->Source          = ServerMACAddress;
-			FrameOUTHeader->Destination     = (MAC_Address_t){{0x02, 0x00, 0x02, 0x00, 0x02, 0x00}};
-			FrameOUTHeader->EtherType       = SwapEndian_16(ETHERTYPE_IPV4);
-
-			PacketSize += sizeof(Ethernet_Frame_Header_t);
-
-			/* Set the response length in the buffer and indicate that a response is ready to be sent */
-			FrameOUT.FrameLength            = PacketSize;
-
-			ConnectionStateTable[CSTableEntry].Info.Buffer.Ready = false;
-
-			break;
-		}
-	}
-}
-
-/** Initializes the TCP protocol handler, clearing the port and connection state tables. This must be called before TCP packets are
- *  processed.
- */
-void TCP_Init(void)
-{
-	/* Initialize the port state table with all CLOSED entries */
-	for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
-	  PortStateTable[PTableEntry].State = TCP_Port_Closed;
-
-	/* Initialize the connection table with all CLOSED entries */
-	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
-	  ConnectionStateTable[CSTableEntry].State = TCP_Connection_Closed;
-}
-
-/** Sets the state and callback handler of the given port, specified in big endian to the given state.
- *
- *  \param[in] Port     Port whose state and callback function to set, specified in big endian
- *  \param[in] State    New state of the port, a value from the \ref TCP_PortStates_t enum
- *  \param[in] Handler  Application callback handler for the port
- *
- *  \return Boolean \c true if the port state was set, \c false otherwise (no more space in the port state table)
- */
-bool TCP_SetPortState(const uint16_t Port,
-                      const uint8_t State,
-                      void (*Handler)(TCP_ConnectionState_t*, TCP_ConnectionBuffer_t*))
-{
-	/* Note, Port number should be specified in BIG endian to simplify network code */
-
-	/* Check to see if the port entry is already in the port state table */
-	for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
-	{
-		/* Find existing entry for the port in the table, update it if found */
-		if (PortStateTable[PTableEntry].Port == Port)
-		{
-			PortStateTable[PTableEntry].State = State;
-			PortStateTable[PTableEntry].ApplicationHandler = Handler;
-			return true;
-		}
-	}
-
-	/* Check if trying to open the port -- if so we need to find an unused (closed) entry and replace it */
-	if (State == TCP_Port_Open)
-	{
-		for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
-		{
-			/* Find a closed port entry in the table, change it to the given port and state */
-			if (PortStateTable[PTableEntry].State == TCP_Port_Closed)
-			{
-				PortStateTable[PTableEntry].Port  = Port;
-				PortStateTable[PTableEntry].State = State;
-				PortStateTable[PTableEntry].ApplicationHandler = Handler;
-				return true;
-			}
-		}
-
-		/* Port not in table and no room to add it, return failure */
-		return false;
-	}
-	else
-	{
-		/* Port not in table but trying to close it, so operation successful */
-		return true;
-	}
-}
-
-/** Retrieves the current state of a given TCP port, specified in big endian.
- *
- *  \param[in] Port  TCP port whose state is to be retrieved, given in big-endian
- *
- *  \return A value from the \ref TCP_PortStates_t enum
- */
-uint8_t TCP_GetPortState(const uint16_t Port)
-{
-	/* Note, Port number should be specified in BIG endian to simplify network code */
-
-	for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++)
-	{
-		/* Find existing entry for the port in the table, return the port status if found */
-		if (PortStateTable[PTableEntry].Port == Port)
-		  return PortStateTable[PTableEntry].State;
-	}
-
-	/* Port not in table, assume closed */
-	return TCP_Port_Closed;
-}
-
-/** Sets the connection state of the given port, remote address and remote port to the given TCP connection state. If the
- *  connection exists in the connection state table it is updated, otherwise it is created if possible.
- *
- *  \param[in] Port           TCP port of the connection on the device, specified in big endian
- *  \param[in] RemoteAddress  Remote protocol IP address of the connected device
- *  \param[in] RemotePort     TCP port of the remote device in the connection, specified in big endian
- *  \param[in] State          TCP connection state, a value from the \ref TCP_ConnectionStates_t enum
- *
- *  \return Boolean \c true if the connection was updated or created, \c false otherwise (no more space in the connection state table)
- */
-bool TCP_SetConnectionState(const uint16_t Port,
-                            const IP_Address_t* RemoteAddress,
-                            const uint16_t RemotePort,
-                            const uint8_t State)
-{
-	/* Note, Port number should be specified in BIG endian to simplify network code */
-
-	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
-	{
-		/* Find port entry in the table */
-		if ((ConnectionStateTable[CSTableEntry].Port == Port) &&
-		     IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) &&
-			 ConnectionStateTable[CSTableEntry].RemotePort == RemotePort)
-		{
-			ConnectionStateTable[CSTableEntry].State = State;
-			return true;
-		}
-	}
-
-	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
-	{
-		/* Find empty entry in the table */
-		if (ConnectionStateTable[CSTableEntry].State == TCP_Connection_Closed)
-		{
-			ConnectionStateTable[CSTableEntry].Port          = Port;
-			ConnectionStateTable[CSTableEntry].RemoteAddress = *RemoteAddress;
-			ConnectionStateTable[CSTableEntry].RemotePort    = RemotePort;
-			ConnectionStateTable[CSTableEntry].State         = State;
-			return true;
-		}
-	}
-
-	return false;
-}
-
-/** Retrieves the current state of a given TCP connection to a host.
- *
- *  \param[in] Port           TCP port on the device in the connection, specified in big endian
- *  \param[in] RemoteAddress  Remote protocol IP address of the connected host
- *  \param[in] RemotePort     Remote TCP port of the connected host, specified in big endian
- *
- *  \return A value from the \ref TCP_ConnectionStates_t enum
- */
-uint8_t TCP_GetConnectionState(const uint16_t Port,
-                               const IP_Address_t* RemoteAddress,
-                               const uint16_t RemotePort)
-{
-	/* Note, Port number should be specified in BIG endian to simplify network code */
-
-	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
-	{
-		/* Find port entry in the table */
-		if ((ConnectionStateTable[CSTableEntry].Port == Port) &&
-		     IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) &&
-			 ConnectionStateTable[CSTableEntry].RemotePort == RemotePort)
-
-		{
-			return ConnectionStateTable[CSTableEntry].State;
-		}
-	}
-
-	return TCP_Connection_Closed;
-}
-
-/** Retrieves the connection info structure of a given connection to a host.
- *
- *  \param[in] Port           TCP port on the device in the connection, specified in big endian
- *  \param[in] RemoteAddress  Remote protocol IP address of the connected host
- *  \param[in] RemotePort     Remote TCP port of the connected host, specified in big endian
- *
- *  \return ConnectionInfo structure of the connection if found, NULL otherwise
- */
-TCP_ConnectionInfo_t* TCP_GetConnectionInfo(const uint16_t Port,
-                                            const IP_Address_t* RemoteAddress,
-                                            const uint16_t RemotePort)
-{
-	/* Note, Port number should be specified in BIG endian to simplify network code */
-
-	for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
-	{
-		/* Find port entry in the table */
-		if ((ConnectionStateTable[CSTableEntry].Port == Port) &&
-		     IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, RemoteAddress) &&
-			 ConnectionStateTable[CSTableEntry].RemotePort == RemotePort)
-		{
-			return &ConnectionStateTable[CSTableEntry].Info;
-		}
-	}
-
-	return NULL;
-}
-
-/** Processes a TCP packet inside an Ethernet frame, and writes the appropriate response
- *  to the output Ethernet frame if one is created by a application handler.
- *
- *  \param[in] IPHeaderInStart     Pointer to the start of the incoming packet's IP header
- *  \param[in] TCPHeaderInStart    Pointer to the start of the incoming packet's TCP header
- *  \param[out] TCPHeaderOutStart  Pointer to the start of the outgoing packet's TCP header
- *
- *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE if no
- *           response was generated, NO_PROCESS if the packet processing was deferred until the
- *           next Ethernet packet handler iteration
- */
-int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart,
-                             void* TCPHeaderInStart,
-                             void* TCPHeaderOutStart)
-{
-	IP_Header_t*  IPHeaderIN   = (IP_Header_t*)IPHeaderInStart;
-	TCP_Header_t* TCPHeaderIN  = (TCP_Header_t*)TCPHeaderInStart;
-	TCP_Header_t* TCPHeaderOUT = (TCP_Header_t*)TCPHeaderOutStart;
-
-	TCP_ConnectionInfo_t* ConnectionInfo;
-
-	DecodeTCPHeader(TCPHeaderInStart);
-
-	bool PacketResponse = false;
-
-	/* Check if the destination port is open and allows incoming connections */
-	if (TCP_GetPortState(TCPHeaderIN->DestinationPort) == TCP_Port_Open)
-	{
-		/* Detect SYN from host to start a connection */
-		if (TCPHeaderIN->Flags & TCP_FLAG_SYN)
-		  TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Listen);
-
-		/* Detect RST from host to abort existing connection */
-		if (TCPHeaderIN->Flags & TCP_FLAG_RST)
-		{
-			if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-			                           TCPHeaderIN->SourcePort, TCP_Connection_Closed))
-			{
-				TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK);
-				PacketResponse = true;
-			}
-		}
-		else
-		{
-			/* Process the incoming TCP packet based on the current connection state for the sender and port */
-			switch (TCP_GetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort))
-			{
-				case TCP_Connection_Listen:
-					if (TCPHeaderIN->Flags == TCP_FLAG_SYN)
-					{
-						/* SYN connection starts a connection with a peer */
-						if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-						                           TCPHeaderIN->SourcePort, TCP_Connection_SYNReceived))
-						{
-							TCPHeaderOUT->Flags = (TCP_FLAG_SYN | TCP_FLAG_ACK);
-
-							ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort);
-
-							ConnectionInfo->SequenceNumberIn  = (SwapEndian_32(TCPHeaderIN->SequenceNumber) + 1);
-							ConnectionInfo->SequenceNumberOut = 0;
-							ConnectionInfo->Buffer.InUse      = false;
-						}
-						else
-						{
-							TCPHeaderOUT->Flags = TCP_FLAG_RST;
-						}
-
-						PacketResponse      = true;
-					}
-
-					break;
-				case TCP_Connection_SYNReceived:
-					if (TCPHeaderIN->Flags == TCP_FLAG_ACK)
-					{
-						/* ACK during the connection process completes the connection to a peer */
-
-						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-											   TCPHeaderIN->SourcePort, TCP_Connection_Established);
-
-						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-															   TCPHeaderIN->SourcePort);
-
-						ConnectionInfo->SequenceNumberOut++;
-					}
-
-					break;
-				case TCP_Connection_Established:
-					if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK))
-					{
-						/* FIN ACK when connected to a peer starts the finalization process */
-
-						TCPHeaderOUT->Flags = (TCP_FLAG_FIN | TCP_FLAG_ACK);
-						PacketResponse      = true;
-
-						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-											   TCPHeaderIN->SourcePort, TCP_Connection_CloseWait);
-
-						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-															   TCPHeaderIN->SourcePort);
-
-						ConnectionInfo->SequenceNumberIn++;
-						ConnectionInfo->SequenceNumberOut++;
-					}
-					else if ((TCPHeaderIN->Flags == TCP_FLAG_ACK) || (TCPHeaderIN->Flags == (TCP_FLAG_ACK | TCP_FLAG_PSH)))
-					{
-						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-															   TCPHeaderIN->SourcePort);
-
-						/* Check if the buffer is currently in use either by a buffered data to send, or receive */
-						if ((ConnectionInfo->Buffer.InUse == false) && (ConnectionInfo->Buffer.Ready == false))
-						{
-							ConnectionInfo->Buffer.Direction = TCP_PACKETDIR_IN;
-							ConnectionInfo->Buffer.InUse     = true;
-							ConnectionInfo->Buffer.Length    = 0;
-						}
-
-						/* Check if the buffer has been claimed by us to read in data from the peer */
-						if ((ConnectionInfo->Buffer.Direction == TCP_PACKETDIR_IN) &&
-							(ConnectionInfo->Buffer.Length != TCP_WINDOW_SIZE))
-						{
-							uint16_t IPOffset   = (IPHeaderIN->HeaderLength * sizeof(uint32_t));
-							uint16_t TCPOffset  = (TCPHeaderIN->DataOffset * sizeof(uint32_t));
-							uint16_t DataLength = (SwapEndian_16(IPHeaderIN->TotalLength) - IPOffset - TCPOffset);
-
-							/* Copy the packet data into the buffer */
-							memcpy(&ConnectionInfo->Buffer.Data[ConnectionInfo->Buffer.Length],
-								   &((uint8_t*)TCPHeaderInStart)[TCPOffset],
-								   DataLength);
-
-							ConnectionInfo->SequenceNumberIn += DataLength;
-							ConnectionInfo->Buffer.Length    += DataLength;
-
-							/* Check if the buffer is full or if the PSH flag is set, if so indicate buffer ready */
-							if ((!(TCP_WINDOW_SIZE - ConnectionInfo->Buffer.Length)) || (TCPHeaderIN->Flags & TCP_FLAG_PSH))
-							{
-								ConnectionInfo->Buffer.InUse = false;
-								ConnectionInfo->Buffer.Ready = true;
-
-								TCPHeaderOUT->Flags = TCP_FLAG_ACK;
-								PacketResponse      = true;
-							}
-						}
-						else
-						{
-							/* Buffer is currently in use by the application, defer processing of the incoming packet */
-							return NO_PROCESS;
-						}
-					}
-
-					break;
-				case TCP_Connection_Closing:
-						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-															   TCPHeaderIN->SourcePort);
-
-						TCPHeaderOUT->Flags = (TCP_FLAG_ACK | TCP_FLAG_FIN);
-						PacketResponse      = true;
-
-						ConnectionInfo->Buffer.InUse = false;
-
-						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-											   TCPHeaderIN->SourcePort, TCP_Connection_FINWait1);
-
-					break;
-				case TCP_Connection_FINWait1:
-					if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK))
-					{
-						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-															   TCPHeaderIN->SourcePort);
-
-						TCPHeaderOUT->Flags = TCP_FLAG_ACK;
-						PacketResponse      = true;
-
-						ConnectionInfo->SequenceNumberIn++;
-						ConnectionInfo->SequenceNumberOut++;
-
-						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-											   TCPHeaderIN->SourcePort, TCP_Connection_Closed);
-					}
-					else if (TCPHeaderIN->Flags == TCP_FLAG_ACK)
-					{
-						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-											   TCPHeaderIN->SourcePort, TCP_Connection_FINWait2);
-					}
-
-					break;
-				case TCP_Connection_FINWait2:
-					if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK))
-					{
-						ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-															   TCPHeaderIN->SourcePort);
-
-						TCPHeaderOUT->Flags = TCP_FLAG_ACK;
-						PacketResponse      = true;
-
-						ConnectionInfo->SequenceNumberIn++;
-						ConnectionInfo->SequenceNumberOut++;
-
-						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-											   TCPHeaderIN->SourcePort, TCP_Connection_Closed);
-					}
-
-					break;
-				case TCP_Connection_CloseWait:
-					if (TCPHeaderIN->Flags == TCP_FLAG_ACK)
-					{
-						TCP_SetConnectionState(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-											   TCPHeaderIN->SourcePort, TCP_Connection_Closed);
-					}
-
-					break;
-			}
-		}
-	}
-	else
-	{
-		/* Port is not open, indicate via a RST/ACK response to the sender */
-		TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK);
-		PacketResponse      = true;
-	}
-
-	/* Check if we need to respond to the sent packet */
-	if (PacketResponse)
-	{
-		ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, &IPHeaderIN->SourceAddress,
-		                                       TCPHeaderIN->SourcePort);
-
-		TCPHeaderOUT->SourcePort           = TCPHeaderIN->DestinationPort;
-		TCPHeaderOUT->DestinationPort      = TCPHeaderIN->SourcePort;
-		TCPHeaderOUT->SequenceNumber       = SwapEndian_32(ConnectionInfo->SequenceNumberOut);
-		TCPHeaderOUT->AcknowledgmentNumber = SwapEndian_32(ConnectionInfo->SequenceNumberIn);
-		TCPHeaderOUT->DataOffset           = (sizeof(TCP_Header_t) / sizeof(uint32_t));
-
-		if (!(ConnectionInfo->Buffer.InUse))
-		  TCPHeaderOUT->WindowSize         = SwapEndian_16(TCP_WINDOW_SIZE);
-		else
-		  TCPHeaderOUT->WindowSize         = SwapEndian_16(TCP_WINDOW_SIZE - ConnectionInfo->Buffer.Length);
-
-		TCPHeaderOUT->UrgentPointer        = 0;
-		TCPHeaderOUT->Checksum             = 0;
-		TCPHeaderOUT->Reserved             = 0;
-
-		TCPHeaderOUT->Checksum             = TCP_Checksum16(TCPHeaderOUT, &IPHeaderIN->DestinationAddress,
-		                                                    &IPHeaderIN->SourceAddress, sizeof(TCP_Header_t));
-
-		return sizeof(TCP_Header_t);
-	}
-
-	return NO_RESPONSE;
-}
-
-/** Calculates the appropriate TCP checksum, consisting of the addition of the one's compliment of each word,
- *  complimented.
- *
- *  \param[in] TCPHeaderOutStart   Pointer to the start of the packet's outgoing TCP header
- *  \param[in] SourceAddress       Source protocol IP address of the outgoing IP header
- *  \param[in] DestinationAddress  Destination protocol IP address of the outgoing IP header
- *  \param[in] TCPOutSize          Size in bytes of the TCP data header and payload
- *
- *  \return A 16-bit TCP checksum value
- */
-static uint16_t TCP_Checksum16(void* TCPHeaderOutStart,
-                               const IP_Address_t* SourceAddress,
-                               const IP_Address_t* DestinationAddress,
-                               uint16_t TCPOutSize)
-{
-	uint32_t Checksum = 0;
-
-	/* TCP/IP checksums are the addition of the one's compliment of each word including the IP pseudo-header,
-	   complimented */
-
-	Checksum += ((uint16_t*)SourceAddress)[0];
-	Checksum += ((uint16_t*)SourceAddress)[1];
-	Checksum += ((uint16_t*)DestinationAddress)[0];
-	Checksum += ((uint16_t*)DestinationAddress)[1];
-	Checksum += SwapEndian_16(PROTOCOL_TCP);
-	Checksum += SwapEndian_16(TCPOutSize);
-
-	for (uint16_t CurrWord = 0; CurrWord < (TCPOutSize >> 1); CurrWord++)
-	  Checksum += ((uint16_t*)TCPHeaderOutStart)[CurrWord];
-
-	if (TCPOutSize & 0x01)
-	  Checksum += (((uint16_t*)TCPHeaderOutStart)[TCPOutSize >> 1] & 0x00FF);
-
-	while (Checksum & 0xFFFF0000)
-	  Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16));
-
-	return ~Checksum;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.h
deleted file mode 100644
index 0d96430bab..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.h
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for TCP.c.
- */
-
-#ifndef _TCP_H_
-#define _TCP_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <stdbool.h>
-
-		#include "EthernetProtocols.h"
-		#include "Ethernet.h"
-		#include "ProtocolDecoders.h"
-
-	/* Macros: */
-		/** Maximum number of TCP ports which can be open at the one time. */
-		#define MAX_OPEN_TCP_PORTS              1
-
-		/** Maximum number of TCP connections which can be sustained at the one time. */
-		#define MAX_TCP_CONNECTIONS             3
-
-		/** TCP window size, giving the maximum number of bytes which can be buffered at the one time. */
-		#define TCP_WINDOW_SIZE                 512
-
-		/** Port number for HTTP transmissions. */
-		#define TCP_PORT_HTTP                   SwapEndian_16(80)
-
-		/** Data direction indicator for a TCP application buffer, indicating data from host-to-device. */
-		#define TCP_PACKETDIR_IN                false
-
-		/** Data direction indicator for a TCP application buffer, indicating data from device-to-host. */
-		#define TCP_PACKETDIR_OUT               true
-
-		/** Congestion Window Reduced TCP flag mask. */
-		#define TCP_FLAG_CWR                    (1 << 7)
-
-		/** Explicit Congestion Notification TCP flag mask. */
-		#define TCP_FLAG_ECE                    (1 << 6)
-
-		/** Urgent TCP flag mask. */
-		#define TCP_FLAG_URG                    (1 << 5)
-
-		/** Data Acknowledge TCP flag mask. */
-		#define TCP_FLAG_ACK                    (1 << 4)
-
-		/** Data Push TCP flag mask. */
-		#define TCP_FLAG_PSH                    (1 << 3)
-
-		/** Reset TCP flag mask. */
-		#define TCP_FLAG_RST                    (1 << 2)
-
-		/** Synchronize TCP flag mask. */
-		#define TCP_FLAG_SYN                    (1 << 1)
-
-		/** Connection Finalize TCP flag mask. */
-		#define TCP_FLAG_FIN                    (1 << 0)
-
-		/** Application macro: Determines if the given application buffer contains a packet received from the host
-		 *
-		 *  \param[in] Buffer  Application buffer to check
-		 *
-		 *  \return Boolean \c true if the buffer contains a packet from the host, \c false otherwise
-		 */
-		#define TCP_APP_HAS_RECEIVED_PACKET(Buffer)  (Buffer->Ready && (Buffer->Direction == TCP_PACKETDIR_IN))
-
-		/** Application macro: Indicates if the application buffer is currently locked by the application for device-to-host transfers.
-		 *
-		 *  \param[in] Buffer  Application buffer to check
-		 *
-		 *  \return Boolean \c true if the buffer has been captured by the application for device-to-host transmissions, \c false otherwise
-		 */
-		#define TCP_APP_HAVE_CAPTURED_BUFFER(Buffer) (!(Buffer->Ready) && Buffer->InUse && \
-		                                              (Buffer->Direction == TCP_PACKETDIR_OUT))
-
-		/** Application macro: Indicates if the application can lock the buffer for multiple continued device-to-host transmissions.
-		 *
-		 *  \param[in] Buffer  Application buffer to check
-		 *
-		 *  \return Boolean \c true if the buffer may be captured by the application for device-to-host transmissions, \c false otherwise
-		 */
-		#define TCP_APP_CAN_CAPTURE_BUFFER(Buffer)   Buffer->InUse
-
-		/** Application macro: Captures the application buffer, locking it for device-to-host transmissions only. This should be
-		 *  performed when the application needs to transmit several packets worth of data in succession with no interruptions from the host.
-		 *
-		 *  \pre The application must check that the buffer can be locked first using TCP_APP_CAN_CAPTURE_BUFFER().
-		 *
-		 *  \param[in] Buffer  Application buffer to lock
-		 */
-		#define TCP_APP_CAPTURE_BUFFER(Buffer)       do { Buffer->Direction = TCP_PACKETDIR_OUT; Buffer->InUse = true; } while (0)
-
-		/** Application macro: Releases a captured application buffer, allowing for host-to-device packets to be received.
-		 *
-		 *  \param[in] Buffer  Application buffer to release
-		 */
-		#define TCP_APP_RELEASE_BUFFER(Buffer)       do { Buffer->InUse = false; } while (0)
-
-		/** Application macro: Sends the contents of the given application buffer to the host.
-		 *
-		 *  \param[in] Buffer  Application buffer to send
-		 *  \param[in] Len     Length of data contained in the buffer
-		 */
-		#define TCP_APP_SEND_BUFFER(Buffer, Len)     do { Buffer->Direction = TCP_PACKETDIR_OUT; Buffer->Length = Len; Buffer->Ready = true; } while (0)
-
-		/** Application macro: Clears the application buffer, ready for a packet to be written to it.
-		 *
-		 *  \param[in] Buffer  Application buffer to clear
-		 */
-		#define TCP_APP_CLEAR_BUFFER(Buffer)         do { Buffer->Ready = false; Buffer->Length = 0; } while (0)
-
-		/** Application macro: Closes an open connection to a host.
-		 *
-		 *  \param[in] Connection  Open TCP connection to close
-		 */
-		#define TCP_APP_CLOSECONNECTION(Connection)  do { Connection->State = TCP_Connection_Closing;  } while (0)
-
-	/* Enums: */
-		/** Enum for possible TCP port states. */
-		enum TCP_PortStates_t
-		{
-			TCP_Port_Closed            = 0, /**< TCP port closed, no connections to a host may be made on this port. */
-			TCP_Port_Open              = 1, /**< TCP port open, connections to a host may be made on this port. */
-		};
-
-		/** Enum for possible TCP connection states. */
-		enum TCP_ConnectionStates_t
-		{
-			TCP_Connection_Listen      = 0, /**< Listening for a connection from a host */
-			TCP_Connection_SYNSent     = 1, /**< Unused */
-			TCP_Connection_SYNReceived = 2, /**< SYN received, waiting for ACK */
-			TCP_Connection_Established = 3, /**< Connection established in both directions */
-			TCP_Connection_FINWait1    = 4, /**< Closing, waiting for ACK */
-			TCP_Connection_FINWait2    = 5, /**< Closing, waiting for FIN ACK */
-			TCP_Connection_CloseWait   = 6, /**< Closing, waiting for ACK */
-			TCP_Connection_Closing     = 7, /**< Unused */
-			TCP_Connection_LastACK     = 8, /**< Unused */
-			TCP_Connection_TimeWait    = 9, /**< Unused */
-			TCP_Connection_Closed      = 10, /**< Connection closed in both directions */
-		};
-
-	/* Type Defines: */
-		/** Type define for a TCP connection buffer structure, including size, data and direction. */
-		typedef struct
-		{
-			uint16_t               Length; /**< Length of data in the TCP application buffer */
-			uint8_t                Data[TCP_WINDOW_SIZE]; /**< TCP application data buffer */
-			bool                   Direction; /**< Buffer transmission direction, either TCP_PACKETDIR_IN  or TCP_PACKETDIR_OUT */
-			bool                   Ready; /**< If data from host, indicates buffer ready to be read, otherwise indicates
-			                               *   buffer ready to be sent to the host
-			                               */
-			bool                   InUse; /**< Indicates if the buffer is locked to to the current direction, and cannot be changed */
-		} TCP_ConnectionBuffer_t;
-
-		/** Type define for a TCP connection information structure. */
-		typedef struct
-		{
-			uint32_t               SequenceNumberIn; /**< Current TCP sequence number for host-to-device */
-			uint32_t               SequenceNumberOut; /**< Current TCP sequence number for device-to-host */
-			TCP_ConnectionBuffer_t Buffer; /**< Connection application data buffer */
-		} TCP_ConnectionInfo_t;
-
-		/** Type define for a complete TCP connection state. */
-		typedef struct
-		{
-			uint16_t               Port; /**< Connection port number on the device */
-			uint16_t               RemotePort; /**< Connection port number on the host */
-			IP_Address_t           RemoteAddress; /**< Connection protocol IP address of the host */
-			TCP_ConnectionInfo_t   Info; /**< Connection information, including application buffer */
-			uint8_t                State; /**< Current connection state, a value from the \ref TCP_ConnectionStates_t enum */
-		} TCP_ConnectionState_t;
-
-		/** Type define for a TCP port state. */
-		typedef struct
-		{
-			uint16_t               Port; /**< TCP port number on the device */
-			uint8_t                State; /**< Current port state, a value from the \ref TCP_PortStates_t enum */
-			void                   (*ApplicationHandler) (TCP_ConnectionState_t* ConnectionState,
-			                                              TCP_ConnectionBuffer_t* Buffer); /**< Port application handler */
-		} TCP_PortState_t;
-
-		/** Type define for a TCP packet header. */
-		typedef struct
-		{
-			uint16_t               SourcePort; /**< Source port of the TCP packet */
-			uint16_t               DestinationPort; /**< Destination port of the TCP packet */
-
-			uint32_t               SequenceNumber; /**< Data sequence number of the packet */
-			uint32_t               AcknowledgmentNumber; /**< Data acknowledgment number of the packet */
-
-			unsigned               Reserved   : 4; /**< Reserved, must be all 0 */
-			unsigned               DataOffset : 4; /**< Offset of the data from the start of the header, in 4 byte chunks */
-			uint8_t                Flags; /**< TCP packet flags */
-			uint16_t               WindowSize; /**< Current data window size (bytes remaining in reception buffer) */
-
-			uint16_t               Checksum; /**< TCP checksum */
-			uint16_t               UrgentPointer; /**< Urgent data pointer */
-		} TCP_Header_t;
-
-	/* Function Prototypes: */
-		void                  TCP_Init(void);
-		void                  TCP_Task(void);
-		bool                  TCP_SetPortState(const uint16_t Port,
-		                                       const uint8_t State,
-		                                       void (*Handler)(TCP_ConnectionState_t*, TCP_ConnectionBuffer_t*));
-		uint8_t               TCP_GetPortState(const uint16_t Port);
-		bool                  TCP_SetConnectionState(const uint16_t Port,
-		                                             const IP_Address_t* RemoteAddress,
-		                                             const uint16_t RemotePort,
-		                                             const uint8_t State);
-		uint8_t               TCP_GetConnectionState(const uint16_t Port,
-		                                             const IP_Address_t* RemoteAddress,
-		                                             const uint16_t RemotePort);
-		TCP_ConnectionInfo_t* TCP_GetConnectionInfo(const uint16_t Port,
-		                                            const IP_Address_t* RemoteAddress,
-		                                            const uint16_t RemotePort);
-		int16_t               TCP_ProcessTCPPacket(void* IPHeaderInStart,
-		                                           void* TCPHeaderInStart,
-		                                           void* TCPHeaderOutStart);
-
-		#if defined(INCLUDE_FROM_TCP_C)
-			static uint16_t TCP_Checksum16(void* TCPHeaderOutStart,
-			                               const IP_Address_t* SourceAddress,
-			                               const IP_Address_t* DestinationAddress,
-			                               uint16_t TCPOutSize);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.c
deleted file mode 100644
index 95911fc5d3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  User Datagram Protocol (UDP) packet handling routines. This protocol handles high throughput, low
- *  reliability packets which are typically used to encapsulate streaming data.
- */
-
-#define  INCLUDE_FROM_UDP_C
-#include "UDP.h"
-
-/** Processes a UDP packet inside an Ethernet frame, and writes the appropriate response
- *  to the output Ethernet frame if a sub-protocol handler has created a response packet.
- *
- *  \param[in] IPHeaderInStart     Pointer to the start of the incoming packet's IP header
- *  \param[in] UDPHeaderInStart    Pointer to the start of the incoming packet's UDP header
- *  \param[out] UDPHeaderOutStart  Pointer to the start of the outgoing packet's UDP header
- *
- *  \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
- */
-int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart,
-                             void* UDPHeaderInStart,
-                             void* UDPHeaderOutStart)
-{
-	UDP_Header_t* UDPHeaderIN  = (UDP_Header_t*)UDPHeaderInStart;
-	UDP_Header_t* UDPHeaderOUT = (UDP_Header_t*)UDPHeaderOutStart;
-
-	int16_t RetSize = NO_RESPONSE;
-
-	DecodeUDPHeader(UDPHeaderInStart);
-
-	switch (SwapEndian_16(UDPHeaderIN->DestinationPort))
-	{
-		case UDP_PORT_DHCP_REQUEST:
-			RetSize = DHCP_ProcessDHCPPacket(IPHeaderInStart,
-			                                 &((uint8_t*)UDPHeaderInStart)[sizeof(UDP_Header_t)],
-		                                     &((uint8_t*)UDPHeaderOutStart)[sizeof(UDP_Header_t)]);
-			break;
-	}
-
-	/* Check to see if the protocol processing routine has filled out a response */
-	if (RetSize > 0)
-	{
-		/* Fill out the response UDP packet header */
-		UDPHeaderOUT->SourcePort      = UDPHeaderIN->DestinationPort;
-		UDPHeaderOUT->DestinationPort = UDPHeaderIN->SourcePort;
-		UDPHeaderOUT->Checksum        = 0;
-		UDPHeaderOUT->Length          = SwapEndian_16(sizeof(UDP_Header_t) + RetSize);
-
-		/* Return the size of the response so far */
-		return (sizeof(UDP_Header_t) + RetSize);
-	}
-
-	return NO_RESPONSE;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.h
deleted file mode 100644
index ec191c4cf1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for UDP.c.
- */
-
-#ifndef _UDP_H_
-#define _UDP_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-
-		#include "EthernetProtocols.h"
-		#include "Ethernet.h"
-		#include "ProtocolDecoders.h"
-		#include "DHCP.h"
-
-	/* Macros: */
-		/** Source UDP port for a DHCP request. */
-		#define UDP_PORT_DHCP_REQUEST 67
-
-		/** Destination UDP port for a DHCP reply. */
-		#define UDP_PORT_DHCP_REPLY   68
-
-		/** Source UDP port for a DNS request/response. */
-		#define UDP_PORT_DNS          53
-
-	/* Type Defines: */
-		/** Type define for a UDP packet header. */
-		typedef struct
-		{
-			uint16_t SourcePort; /**< Packet source port */
-			uint16_t DestinationPort; /**< Packet destination port */
-			uint16_t Length; /**< Total packet length, in bytes */
-			uint16_t Checksum; /**< Optional UDP packet checksum */
-		} UDP_Header_t;
-
-	/* Function Prototypes: */
-		int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart,
-		                             void* UDPHeaderInStart,
-		                             void* UDPHeaderOutStart);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.c
deleted file mode 100644
index 925973c7dd..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Simple webserver application for demonstrating the RNDIS demo and TCP/IP stack. This
- *  application will serve up a static HTTP webpage when requested by the host.
- */
-
-#include "Webserver.h"
-
-/** HTTP server response header, for transmission before the page contents. This indicates to the host that a page exists at the
- *  given location, and gives extra connection information.
- */
-const char PROGMEM HTTP200Header[] = "HTTP/1.1 200 OK\r\n"
-                                     "Server: LUFA RNDIS\r\n"
-                                     "Content-type: text/html\r\n"
-                                     "Connection: close\r\n\r\n";
-
-/** HTTP server response header, for transmission before a resource not found error. This indicates to the host that the given
- *  given URL is invalid, and gives extra error information.
- */
-const char PROGMEM HTTP404Header[] = "HTTP/1.1 404 Not Found\r\n"
-                                     "Server: LUFA RNDIS\r\n"
-                                     "Connection: close\r\n\r\n";
-
-/** HTTP page to serve to the host when a HTTP request is made. This page is too long for a single response, thus it is automatically
- *  broken up into smaller blocks and sent as a series of packets each time the webserver application callback is run.
- */
-const char PROGMEM HTTPPage[]   =
-		"<html>"
-		"	<head>"
-		"		<title>"
-		"			LUFA Webserver Demo"
-		"		</title>"
-		"	</head>"
-		"	<body>"
-		"		<h1>Hello from your USB AVR!</h1>"
-		"		<p>"
-		"			Hello! Welcome to the LUFA RNDIS Demo Webserver test page, running on your USB AVR via the LUFA library. This demonstrates the HTTP webserver, TCP/IP stack and RNDIS demo all running atop the LUFA USB stack."
-		"			<br /><br />"
-		"			<small>Project Information: <a href=\"http://www.lufa-lib.org\">http://www.lufa-lib.org</a>.</small>"
-		"			<hr />"
-		"			<i>LUFA Version: </i>" LUFA_VERSION_STRING
-		"		</p>"
-		"	</body>"
-		"</html>";
-
-
-/** Initializes the Webserver application, opening the appropriate HTTP port in the TCP handler and registering the application
- *  callback routine for packets sent to the HTTP protocol port.
- */
-void Webserver_Init(void)
-{
-	/* Open the HTTP port in the TCP protocol so that HTTP connections to the device can be established */
-	TCP_SetPortState(TCP_PORT_HTTP, TCP_Port_Open, Webserver_ApplicationCallback);
-}
-
-/** Indicates if a given request equals the given HTTP command.
- *
- *  \param[in] RequestHeader  HTTP request made by the host
- *  \param[in] Command        HTTP command to compare the request to
- *
- *  \return Boolean \c true if the command matches the request, \c false otherwise
- */
-static bool IsHTTPCommand(uint8_t* RequestHeader,
-                          char* Command)
-{
-	/* Returns true if the non null terminated string in RequestHeader matches the null terminated string Command */
-	return (strncmp((char*)RequestHeader, Command, strlen(Command)) == 0);
-}
-
-/** Application callback routine, executed each time the TCP processing task runs. This callback determines what request
- *  has been made (if any), and serves up appropriate responses.
- *
- *  \param[in] ConnectionState  Pointer to a TCP Connection State structure giving connection information
- *  \param[in,out] Buffer       Pointer to the application's send/receive packet buffer
- */
-void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState,
-                                   TCP_ConnectionBuffer_t* const Buffer)
-{
-	char*          BufferDataStr = (char*)Buffer->Data;
-	static uint8_t PageBlock     = 0;
-
-	/* Check to see if a packet has been received on the HTTP port from a remote host */
-	if (TCP_APP_HAS_RECEIVED_PACKET(Buffer))
-	{
-		if (IsHTTPCommand(Buffer->Data, "GET"))
-		{
-			if (IsHTTPCommand(Buffer->Data, "GET / "))
-			{
-				PageBlock = 0;
-
-				/* Copy the HTTP 200 response header into the packet buffer */
-				strcpy_P(BufferDataStr, HTTP200Header);
-
-				/* Send the buffer contents to the host */
-				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
-
-				/* Lock the buffer to Device->Host transmissions only while we send the page contents */
-				TCP_APP_CAPTURE_BUFFER(Buffer);
-			}
-			else
-			{
-				/* Copy the HTTP 404 response header into the packet buffer */
-				strcpy_P(BufferDataStr, HTTP404Header);
-
-				/* Send the buffer contents to the host */
-				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
-
-				/* All data sent, close the connection */
-				TCP_APP_CLOSECONNECTION(ConnectionState);
-			}
-		}
-		else if (IsHTTPCommand(Buffer->Data, "HEAD"))
-		{
-			if (IsHTTPCommand(Buffer->Data, "HEAD / "))
-			{
-				/* Copy the HTTP response header into the packet buffer */
-				strcpy_P(BufferDataStr, HTTP200Header);
-
-				/* Send the buffer contents to the host */
-				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
-			}
-			else
-			{
-				/* Copy the HTTP response header into the packet buffer */
-				strcpy_P(BufferDataStr, HTTP404Header);
-
-				/* Send the buffer contents to the host */
-				TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr));
-			}
-
-			/* All data sent, close the connection */
-			TCP_APP_CLOSECONNECTION(ConnectionState);
-		}
-		else if (IsHTTPCommand(Buffer->Data, "TRACE"))
-		{
-			/* Echo the host's query back to the host */
-			TCP_APP_SEND_BUFFER(Buffer, Buffer->Length);
-
-			/* All data sent, close the connection */
-			TCP_APP_CLOSECONNECTION(ConnectionState);
-		}
-		else
-		{
-			/* Unknown request, just clear the buffer (drop the packet) */
-			TCP_APP_CLEAR_BUFFER(Buffer);
-		}
-	}
-	else if (TCP_APP_HAVE_CAPTURED_BUFFER(Buffer))
-	{
-		uint16_t RemLength = strlen_P(&HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE]);
-		uint16_t Length;
-
-		/* Determine the length of the loaded block */
-		Length = MIN(RemLength, HTTP_REPLY_BLOCK_SIZE);
-
-		/* Copy the next buffer sized block of the page to the packet buffer */
-		strncpy_P(BufferDataStr, &HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE], Length);
-
-		/* Send the buffer contents to the host */
-		TCP_APP_SEND_BUFFER(Buffer, Length);
-
-		/* Check to see if the entire page has been sent */
-		if (PageBlock++ == (sizeof(HTTPPage) / HTTP_REPLY_BLOCK_SIZE))
-		{
-			/* Unlock the buffer so that the host can fill it with future packets */
-			TCP_APP_RELEASE_BUFFER(Buffer);
-
-			/* Close the connection to the host */
-			TCP_APP_CLOSECONNECTION(ConnectionState);
-		}
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.h
deleted file mode 100644
index 8307d46dad..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Webserver.c.
- */
-
-#ifndef _WEBSERVER_H_
-#define _WEBSERVER_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Version.h>
-
-		#include "TCP.h"
-
-	/* Macros: */
-		/** Maximum size of a HTTP response per transmission */
-		#define  HTTP_REPLY_BLOCK_SIZE     128
-
-	/* Function Prototypes: */
-		void Webserver_Init(void);
-		void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState,
-		                                   TCP_ConnectionBuffer_t* const Buffer);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
deleted file mode 100644
index f25c4754e2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the RNDISEthernet demo. This file contains the main tasks of the demo and
- *  is responsible for the initial application hardware configuration.
- */
-
-#include "RNDISEthernet.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	/* Webserver Initialization */
-	TCP_Init();
-	Webserver_Init();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		Ethernet_Task();
-		TCP_Task();
-		RNDIS_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	Serial_Init(9600, false);
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Device_Connect(void)
-{
-	/* Indicate USB enumerating */
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs and stops all the relevant tasks.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Indicate USB not ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
- *  of the USB device after enumeration, and configures the RNDIS device endpoints and starts the relevant tasks.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup RNDIS Data Endpoints */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1);
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- *  the device from the USB host before passing along unhandled control requests to the library for processing
- *  internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	/* Process RNDIS class commands */
-	switch (USB_ControlRequest.bRequest)
-	{
-		case RNDIS_REQ_SendEncapsulatedCommand:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-
-				/* Read in the RNDIS message into the message buffer */
-				Endpoint_Read_Control_Stream_LE(RNDISMessageBuffer, USB_ControlRequest.wLength);
-				Endpoint_ClearIN();
-
-				/* Process the RNDIS message */
-				ProcessRNDISControlMessage();
-			}
-
-			break;
-		case RNDIS_REQ_GetEncapsulatedResponse:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				/* Check if a response to the last message is ready */
-				if (!(MessageHeader->MessageLength))
-				{
-					/* Set the response to a single 0x00 byte to indicate that no response is ready */
-					RNDISMessageBuffer[0] = 0;
-					MessageHeader->MessageLength = 1;
-				}
-
-				Endpoint_ClearSETUP();
-
-				/* Write the message response data to the endpoint */
-				Endpoint_Write_Control_Stream_LE(RNDISMessageBuffer, MessageHeader->MessageLength);
-				Endpoint_ClearOUT();
-
-				/* Reset the message header once again after transmission */
-				MessageHeader->MessageLength = 0;
-			}
-
-			break;
-	}
-}
-
-/** Task to manage the sending and receiving of encapsulated RNDIS data and notifications. This removes the RNDIS
- *  wrapper from received Ethernet frames and places them in the FrameIN global buffer, or adds the RNDIS wrapper
- *  to a frame in the FrameOUT global before sending the buffer contents to the host.
- */
-void RNDIS_Task(void)
-{
-	/* Select the notification endpoint */
-	Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPADDR);
-
-	/* Check if a message response is ready for the host */
-	if (Endpoint_IsINReady() && ResponseReady)
-	{
-		USB_Request_Header_t Notification = (USB_Request_Header_t)
-			{
-				.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
-				.bRequest      = RNDIS_NOTIF_ResponseAvailable,
-				.wValue        = 0,
-				.wIndex        = 0,
-				.wLength       = 0,
-			};
-
-		/* Indicate that a message response is ready for the host */
-		Endpoint_Write_Stream_LE(&Notification, sizeof(Notification), NULL);
-
-		/* Finalize the stream transfer to send the last packet */
-		Endpoint_ClearIN();
-
-		/* Indicate a response is no longer ready */
-		ResponseReady = false;
-	}
-
-	/* Don't process the data endpoints until the system is in the data initialized state, and the buffer is free */
-	if ((CurrRNDISState == RNDIS_Data_Initialized) && !(MessageHeader->MessageLength))
-	{
-		/* Create a new packet header for reading/writing */
-		RNDIS_Packet_Message_t RNDISPacketHeader;
-
-		/* Select the data OUT endpoint */
-		Endpoint_SelectEndpoint(CDC_RX_EPADDR);
-
-		/* Check if the data OUT endpoint contains data, and that the IN buffer is empty */
-		if (Endpoint_IsOUTReceived() && !(FrameIN.FrameLength))
-		{
-			/* Read in the packet message header */
-			Endpoint_Read_Stream_LE(&RNDISPacketHeader, sizeof(RNDIS_Packet_Message_t), NULL);
-
-			/* Stall the request if the data is too large */
-			if (RNDISPacketHeader.DataLength > ETHERNET_FRAME_SIZE_MAX)
-			{
-				Endpoint_StallTransaction();
-				return;
-			}
-
-			/* Read in the Ethernet frame into the buffer */
-			Endpoint_Read_Stream_LE(FrameIN.FrameData, RNDISPacketHeader.DataLength, NULL);
-
-			/* Finalize the stream transfer to send the last packet */
-			Endpoint_ClearOUT();
-
-			/* Store the size of the Ethernet frame */
-			FrameIN.FrameLength = RNDISPacketHeader.DataLength;
-		}
-
-		/* Select the data IN endpoint */
-		Endpoint_SelectEndpoint(CDC_TX_EPADDR);
-
-		/* Check if the data IN endpoint is ready for more data, and that the IN buffer is full */
-		if (Endpoint_IsINReady() && FrameOUT.FrameLength)
-		{
-			/* Clear the packet header with all 0s so that the relevant fields can be filled */
-			memset(&RNDISPacketHeader, 0, sizeof(RNDIS_Packet_Message_t));
-
-			/* Construct the required packet header fields in the buffer */
-			RNDISPacketHeader.MessageType   = REMOTE_NDIS_PACKET_MSG;
-			RNDISPacketHeader.MessageLength = (sizeof(RNDIS_Packet_Message_t) + FrameOUT.FrameLength);
-			RNDISPacketHeader.DataOffset    = (sizeof(RNDIS_Packet_Message_t) - sizeof(RNDIS_Message_Header_t));
-			RNDISPacketHeader.DataLength    = FrameOUT.FrameLength;
-
-			/* Send the packet header to the host */
-			Endpoint_Write_Stream_LE(&RNDISPacketHeader, sizeof(RNDIS_Packet_Message_t), NULL);
-
-			/* Send the Ethernet frame data to the host */
-			Endpoint_Write_Stream_LE(FrameOUT.FrameData, RNDISPacketHeader.DataLength, NULL);
-
-			/* Finalize the stream transfer to send the last packet */
-			Endpoint_ClearIN();
-
-			/* Indicate Ethernet OUT buffer no longer full */
-			FrameOUT.FrameLength = 0;
-		}
-	}
-}
-
-/** Ethernet frame processing task. This task checks to see if a frame has been received, and if so hands off the processing
- *  of the frame to the Ethernet processing routines.
- */
-void Ethernet_Task(void)
-{
-	/* Task for Ethernet processing. Incoming ethernet frames are loaded into the FrameIN structure, and
-	   outgoing frames should be loaded into the FrameOUT structure. Both structures can only hold a single
-	   Ethernet frame at a time, so the FrameInBuffer bool is used to indicate when the buffers contain data. */
-
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	/* Check if a frame has been written to the IN frame buffer */
-	if (FrameIN.FrameLength)
-	{
-		/* Indicate packet processing started */
-		LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-		/* Process the ethernet frame - replace this with your own Ethernet handler code as desired */
-		Ethernet_ProcessPacket();
-
-		/* Indicate packet processing complete */
-		LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h
deleted file mode 100644
index 90fbae3350..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for RNDISEthernet.c.
- */
-
-#ifndef _RNDISETHERNET_H_
-#define _RNDISETHERNET_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include "Lib/RNDIS.h"
-		#include "Lib/Ethernet.h"
-		#include "Lib/TCP.h"
-		#include "Lib/ARP.h"
-		#include "Lib/Webserver.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY          LEDS_LED2
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void RNDIS_Task(void);
-		void Ethernet_Task(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt
deleted file mode 100644
index 496ab07a1d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt
+++ /dev/null
@@ -1,146 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage RNDIS Class Ethernet Demo (with Webserver/Telnet)
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>Microsoft RNDIS Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Remote Network Driver Interface demonstration application.
- *  This gives a simple reference application for implementing
- *  a CDC RNDIS device acting as a simple network interface for
- *  ethernet packet exchange. RNDIS is a proprietary Microsoft
- *  standard; this demo will only work on Windows 2000 (manually
- *  patched with the Microsoft RNDIS hotfix) and above (with no
- *  manual patches), or on the latest Linux kernels.
- *
- *  Before running, you will need to install the INF file that
- *  is located in the RNDISEthernet project directory. This will
- *  enable Windows to use its inbuilt RNDIS drivers, negating the
- *  need for special Windows drivers for the device. To install,
- *  right-click the .INF file and choose the Install option. If
- *  Windows 2000 is used, the Microsoft INF file in the hotfix
- *  will need to be altered to use the VID/PID of the demo and
- *  then chosen instead of the LUFA RNDIS INF file when prompted.
- *
- *  When enumerated, this demo will install as a new network
- *  adapter which ethernet packets can be sent to and received
- *  from. Running on top of the adapter is a very simple TCP/IP
- *  stack with a HTTP webserver and TELNET host which can be
- *  accessed through a web browser at IP address 10.0.0.2:80 or
- *  through a TELNET client at 10.0.0.2:25. This device also supports
- *  ping echos via the ICMP protocol.
- *
- *  \note The TCP/IP stack in this demo has a number of limitations
- *  and should serve as an example only - it is not fully featured nor
- *  compliant to the TCP/IP specification. For complete projects, it is
- *  recommended that it be replaced with an external open source TCP/IP
- *  stack that is feature complete, such as the uIP stack.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>CLIENT_IP_ADDRESS</td>
- *    <td>AppConfig.h</td>
- *    <td>Configures the IP address given to the client (PC) via the DHCP server.</td>
- *   </tr>
- *   <tr>
- *    <td>SERVER_IP_ADDRESS</td>
- *    <td>AppConfig.h</td>
- *    <td>Configures the IP address of the virtual server.</td>
- *   </tr>
- *   <tr>
- *    <td>ADAPTER_MAC_ADDRESS</td>
- *    <td>AppConfig.h</td>
- *    <td>Configures the MAC address of the RNDIS adapter on the host (PC) side.</td>
- *   </tr>
- *   <tr>
- *    <td>SERVER_MAC_ADDRESS</td>
- *    <td>AppConfig.h</td>
- *    <td>Configures the MAC address of the virtual server on the network.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_ETHERNET</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_ARP</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_IP</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_ICMP</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_TCP</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_UDP</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_DHCP</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/asf.xml
deleted file mode 100644
index 2cba10c9e1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/asf.xml
+++ /dev/null
@@ -1,85 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.avr8">

-		<require idref="lufa.demos.device.lowlevel.rndis"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.xmega">

-		<require idref="lufa.demos.device.lowlevel.rndis"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.lowlevel.rndis" caption="RNDIS Ethernet Device Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Microsoft RNDIS Ethernet networking device demo, implementing a basic HTTP webserver. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="RNDIS Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="RNDISEthernet.txt"/>

-

-		<build type="c-source" value="RNDISEthernet.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="c-source" value="Lib/ARP.c"/>

-		<build type="c-source" value="Lib/DHCP.c"/>

-		<build type="c-source" value="Lib/Ethernet.c"/>

-		<build type="c-source" value="Lib/ICMP.c"/>

-		<build type="c-source" value="Lib/IP.c"/>

-		<build type="c-source" value="Lib/ProtocolDecoders.c"/>

-		<build type="c-source" value="Lib/RNDIS.c"/>

-		<build type="c-source" value="Lib/TCP.c"/>

-		<build type="c-source" value="Lib/UDP.c"/>

-		<build type="c-source" value="Lib/Webserver.c"/>

-		<build type="header-file" value="RNDISEthernet.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="header-file" value="Lib/ARP.h"/>

-		<build type="header-file" value="Lib/DHCP.h"/>

-		<build type="header-file" value="Lib/Ethernet.h"/>

-		<build type="header-file" value="Lib/ICMP.h"/>

-		<build type="header-file" value="Lib/IP.h"/>

-		<build type="header-file" value="Lib/ProtocolDecoders.h"/>

-		<build type="header-file" value="Lib/RNDIS.h"/>

-		<build type="header-file" value="Lib/TCP.h"/>

-		<build type="header-file" value="Lib/UDP.h"/>

-		<build type="header-file" value="Lib/Webserver.h"/>

-		<build type="header-file" value="Lib/EthernetProtocols.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/doxyfile
deleted file mode 100644
index 9147230ecc..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - RNDIS Ethernet Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/makefile
deleted file mode 100644
index 32e881888a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/makefile
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = RNDISEthernet
-SRC          = $(TARGET).c Descriptors.c Lib/Ethernet.c Lib/ProtocolDecoders.c Lib/RNDIS.c Lib/ICMP.c Lib/TCP.c Lib/UDP.c \
-               Lib/DHCP.c Lib/ARP.c Lib/IP.c Lib/Webserver.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/Config/LUFAConfig.h
deleted file mode 100644
index 8d282325e3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/Config/LUFAConfig.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#elif (ARCH == ARCH_XMEGA)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define MAX_ENDPOINT_INDEX               4
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/Descriptors.c
deleted file mode 100644
index 3141512268..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/Descriptors.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = CDC_CSCP_CDCClass,
-	.SubClass               = CDC_CSCP_NoSpecificSubclass,
-	.Protocol               = CDC_CSCP_NoSpecificProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2044,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 2,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.CDC_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x06,
-		},
-
-	.CDC_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
-		},
-
-	.CDC_NotificationEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA CDC Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/Descriptors.h
deleted file mode 100644
index d0a17a18ee..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/Descriptors.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-	/* Macros: */
-		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 2)
-
-		/** Endpoint address of the CDC device-to-host data IN endpoint. */
-		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
-		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPSIZE        8
-
-		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                16
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t    Config;
-
-			// CDC Control Interface
-			USB_Descriptor_Interface_t               CDC_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
-			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
-
-			// CDC Data Interface
-			USB_Descriptor_Interface_t               CDC_DCI_Interface;
-			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
-			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/LUFA VirtualSerial.inf b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/LUFA VirtualSerial.inf
deleted file mode 100644
index 21d2d12b6e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/LUFA VirtualSerial.inf
+++ /dev/null
@@ -1,66 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-;************************************************************
-
-[DefaultInstall]
-CopyINF="LUFA VirtualSerial.inf"
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-DriverVer=7/1/2012,10.0.0.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
-
-[SourceDisksNames]
-
-[SourceDisksFiles]
-
-[DestinationDirs]
-DefaultDestDir=12
-
-[DriverInstall]
-Include=mdmcpq.inf
-CopyFiles=FakeModemCopyFileSection
-AddReg=DriverInstall.AddReg
-
-[DriverInstall.Services]
-Include=mdmcpq.inf
-AddService=usbser, 0x00000002, LowerFilter_Service_Inst
-
-[DriverInstall.AddReg]
-HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
-
-[DeviceList.NTx86]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
-
-[DeviceList.NTia64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGNAME="http://www.lufa-lib.org"
-DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
deleted file mode 100644
index cdd358571c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the VirtualSerial demo. This file contains the main tasks of the demo and
- *  is responsible for the initial application hardware configuration.
- */
-
-#include "VirtualSerial.h"
-
-/** Contains the current baud rate and other settings of the virtual serial port. While this demo does not use
- *  the physical USART and thus does not use these settings, they must still be retained and returned to the host
- *  upon request or the host will assume the device is non-functional.
- *
- *  These values are set by the host via a class-specific request, however they are not required to be used accurately.
- *  It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
- *  serial link characteristics and instead sends and receives data in endpoint streams.
- */
-static CDC_LineEncoding_t LineEncoding = { .BaudRateBPS = 0,
-                                           .CharFormat  = CDC_LINEENCODING_OneStopBit,
-                                           .ParityType  = CDC_PARITY_None,
-                                           .DataBits    = 8                            };
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		CDC_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#elif (ARCH == ARCH_XMEGA)
-	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
-	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
-	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
-
-	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
-	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
-	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
-
-	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Device_Connect(void)
-{
-	/* Indicate USB enumerating */
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- *  the status LEDs and stops the USB management and CDC management tasks.
- */
-void EVENT_USB_Device_Disconnect(void)
-{
-	/* Indicate USB not ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
- *  of the USB device after enumeration - the device endpoints are configured and the CDC management task started.
- */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup CDC Data Endpoints */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_RX_EPADDR, EP_TYPE_BULK,  CDC_TXRX_EPSIZE, 1);
-
-	/* Reset line encoding baud rate so that the host knows to send new values */
-	LineEncoding.BaudRateBPS = 0;
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- *  the device from the USB host before passing along unhandled control requests to the library for processing
- *  internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	/* Process CDC specific control requests */
-	switch (USB_ControlRequest.bRequest)
-	{
-		case CDC_REQ_GetLineEncoding:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-
-				/* Write the line coding data to the control endpoint */
-				Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_LineEncoding_t));
-				Endpoint_ClearOUT();
-			}
-
-			break;
-		case CDC_REQ_SetLineEncoding:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-
-				/* Read the line coding data in from the host into the global struct */
-				Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_LineEncoding_t));
-				Endpoint_ClearIN();
-			}
-
-			break;
-		case CDC_REQ_SetControlLineState:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				Endpoint_ClearSETUP();
-				Endpoint_ClearStatusStage();
-
-				/* NOTE: Here you can read in the line state mask from the host, to get the current state of the output handshake
-				         lines. The mask is read in from the wValue parameter in USB_ControlRequest, and can be masked against the
-						 CONTROL_LINE_OUT_* masks to determine the RTS and DTR line states using the following code:
-				*/
-			}
-
-			break;
-	}
-}
-
-/** Function to manage CDC data transmission and reception to and from the host. */
-void CDC_Task(void)
-{
-	char*       ReportString    = NULL;
-	uint8_t     JoyStatus_LCL   = Joystick_GetStatus();
-	static bool ActionSent      = false;
-
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	/* Determine if a joystick action has occurred */
-	if (JoyStatus_LCL & JOY_UP)
-	  ReportString = "Joystick Up\r\n";
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  ReportString = "Joystick Down\r\n";
-	else if (JoyStatus_LCL & JOY_LEFT)
-	  ReportString = "Joystick Left\r\n";
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  ReportString = "Joystick Right\r\n";
-	else if (JoyStatus_LCL & JOY_PRESS)
-	  ReportString = "Joystick Pressed\r\n";
-	else
-	  ActionSent = false;
-
-	/* Flag management - Only allow one string to be sent per action */
-	if ((ReportString != NULL) && (ActionSent == false) && LineEncoding.BaudRateBPS)
-	{
-		ActionSent = true;
-
-		/* Select the Serial Tx Endpoint */
-		Endpoint_SelectEndpoint(CDC_TX_EPADDR);
-
-		/* Write the String to the Endpoint */
-		Endpoint_Write_Stream_LE(ReportString, strlen(ReportString), NULL);
-
-		/* Remember if the packet to send completely fills the endpoint */
-		bool IsFull = (Endpoint_BytesInEndpoint() == CDC_TXRX_EPSIZE);
-
-		/* Finalize the stream transfer to send the last packet */
-		Endpoint_ClearIN();
-
-		/* If the last packet filled the endpoint, send an empty packet to release the buffer on
-		 * the receiver (otherwise all data will be cached until a non-full packet is received) */
-		if (IsFull)
-		{
-			/* Wait until the endpoint is ready for another packet */
-			Endpoint_WaitUntilReady();
-
-			/* Send an empty packet to ensure that the host does not buffer data sent to it */
-			Endpoint_ClearIN();
-		}
-	}
-
-	/* Select the Serial Rx Endpoint */
-	Endpoint_SelectEndpoint(CDC_RX_EPADDR);
-
-	/* Throw away any received data from the host */
-	if (Endpoint_IsOUTReceived())
-	  Endpoint_ClearOUT();
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h
deleted file mode 100644
index bdfc9f03fa..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for VirtualSerial.c.
- */
-
-#ifndef _VIRTUALSERIAL_H_
-#define _VIRTUALSERIAL_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY         LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING     (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY           (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR           (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void CDC_Task(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt
deleted file mode 100644
index 61b665674f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Communications Device Class (Virtual Serial Port) Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Communications Device Class demonstration application.
- *  This gives a simple reference application for implementing
- *  a CDC device acting as a virtual serial port. Joystick
- *  actions are transmitted to the host as strings. The device
- *  does not respond to serial data sent from the host.
- *
- *  After running this demo for the first time on a new computer,
- *  you will need to supply the .INF file located in this demo
- *  project's directory as the device's driver when running under
- *  Windows. This will enable Windows to use its inbuilt CDC drivers,
- *  negating the need for custom drivers for the device. Other
- *  Operating Systems should automatically use their own inbuilt
- *  CDC-ACM drivers.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/asf.xml
deleted file mode 100644
index 1eb328b510..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/asf.xml
+++ /dev/null
@@ -1,63 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.avr8">

-		<require idref="lufa.demos.device.lowlevel.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.xmega">

-		<require idref="lufa.demos.device.lowlevel.cdc"/>

-		<require idref="lufa.boards.dummy.xmega"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atxmega128a1u"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="32000000UL"/>

-		<build type="define" name="F_USB" value="48000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.device.lowlevel.cdc" caption="Virtual Serial CDC Device Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Virtual Serial device demo, implementing a virtual serial channel between the host PC and the device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="CDC Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="VirtualSerial.txt"/>

-		<build type="distribute" subtype="user-file" value="LUFA VirtualSerial.inf"/>

-

-		<build type="c-source" value="VirtualSerial.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="VirtualSerial.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-		<require idref="lufa.drivers.board.joystick"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/doxyfile
deleted file mode 100644
index 0d0ae156c2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Virtual Serial Device Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/makefile
deleted file mode 100644
index a7bada895a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/VirtualSerial/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = VirtualSerial
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/makefile
deleted file mode 100644
index 1450df5e20..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/LowLevel/makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-
-# Makefile to build all the LUFA Device Demos. Call with "make all" to
-# rebuild all Device demos.
-
-# Projects are pre-cleaned before each one is built, to ensure any
-# custom LUFA library build options are reflected in the compiled
-# code.
-
-PROJECT_DIRECTORIES := $(shell ls -d */)
-
-# This makefile is potentially infinitely recursive if something really bad
-# happens when determining the set of project directories - hard-abort if
-# more than 10 levels deep to avoid angry emails.
-ifeq ($(MAKELEVEL), 10)
-   $(error EMERGENCY ABORT: INFINITE RECURSION DETECTED)
-endif
-
-# Need to special-case building without a per-project object directory
-ifeq ($(OBJDIR),)
-   # If no target specified, force "clean all" and disallow parallel build
-   ifeq ($(MAKECMDGOALS),)
-      MAKECMDGOALS := clean all
-      .NOTPARALLEL:
-   endif
-
-   # If one of the targets is to build, force "clean" beforehand and disallow parallel build
-   ifneq ($(findstring all, $(MAKECMDGOALS)),)
-      MAKECMDGOALS := clean $(MAKECMDGOALS)
-      .NOTPARALLEL:
-   endif
-endif
-
-%: $(PROJECT_DIRECTORIES)
-	@echo . > /dev/null
-
-$(PROJECT_DIRECTORIES):
-	@$(MAKE) -C $@ $(MAKECMDGOALS)
-
-.PHONY: $(PROJECT_DIRECTORIES)
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Device/makefile
deleted file mode 100644
index 3325e97d8b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Device/makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-
-# Makefile to build all the LUFA Class Driver and Low Level Demos. Call with
-# "make all" to rebuild all demos of both types.
-
-# Projects are pre-cleaned before each one is built, to ensure any
-# custom LUFA library build options are reflected in the compiled
-# code.
-
-all:
-
-%:
-	$(MAKE) -C ClassDriver $@
-	$(MAKE) -C LowLevel $@
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/Config/LUFAConfig.h
deleted file mode 100644
index db1d85b246..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c
deleted file mode 100644
index bcd5b58725..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] =
-{
-	/* Use the HID class driver's standard Mouse report.
-	 *   Min X/Y Axis values: -1
-	 *   Max X/Y Axis values:  1
-	 *   Min physical X/Y Axis values (used to determine resolution): -1
-	 *   Max physical X/Y Axis values (used to determine resolution):  1
-	 *   Buttons: 3
-	 *   Absolute screen coordinates: false
-	 */
-	HID_DESCRIPTOR_MOUSE(-1, 1, -1, 1, 3, false)
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2041,
-	.ReleaseNumber          = 0x0000,
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.HID_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Mouse,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_BootSubclass,
-			.Protocol               = HID_CSCP_MouseBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_MouseHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(MouseReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MOUSE_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MOUSE_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Mouse Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_MouseHID;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case HID_DTYPE_Report:
-			Address = &MouseReport;
-			Size    = sizeof(MouseReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h
deleted file mode 100644
index 7ba3608e68..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Mouse HID Interface
-			USB_Descriptor_Interface_t            HID_Interface;
-			USB_HID_Descriptor_HID_t              HID_MouseHID;
-			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_Mouse = 0, /**< Mouse interface descriptor ID (must be zero) */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Macros: */
-		/** Endpoint address of the Mouse HID reporting IN endpoint. */
-		#define MOUSE_EPADDR              (ENDPOINT_DIR_IN | 1)
-
-		/** Size in bytes of the Mouse HID reporting IN endpoint. */
-		#define MOUSE_EPSIZE              8
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c
deleted file mode 100644
index e81cd43ff7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Device Mode USB Mouse functionality for the MouseHostDevice demo. This file contains the Device mode
- *  USB Mouse related code of the demo and is responsible for all the Device mode Mouse functionality.
- */
-
-#include "DeviceFunctions.h"
-
-/** Buffer to hold the previously generated Mouse Device HID report, for comparison purposes inside the HID class driver. */
-static uint8_t PrevMouseHIDReportBuffer[sizeof(USB_MouseReport_Data_t)];
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Device_t Mouse_HID_Device_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber            = INTERFACE_ID_Mouse,
-				.ReportINEndpoint           =
-					{
-						.Address            = MOUSE_EPADDR,
-						.Size               = MOUSE_EPSIZE,
-						.Banks              = 1,
-					},
-				.PrevReportINBuffer         = PrevMouseHIDReportBuffer,
-				.PrevReportINBufferSize     = sizeof(PrevMouseHIDReportBuffer),
-			},
-	};
-
-
-/** Event handler for the library USB WakeUp event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Suspend event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-
-	if (!(HID_Device_ConfigureEndpoints(&Mouse_HID_Device_Interface)))
-	  LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
-	USB_Device_EnableSOFEvents();
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	HID_Device_ProcessControlRequest(&Mouse_HID_Device_Interface);
-}
-
-/** Event handler for the USB device Start Of Frame event. */
-void EVENT_USB_Device_StartOfFrame(void)
-{
-	HID_Device_MillisecondElapsed(&Mouse_HID_Device_Interface);
-}
-
-/** HID class driver callback function for the creation of HID reports to the host.
- *
- *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
- *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
- *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
- *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
- *
- *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
- */
-bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                         uint8_t* const ReportID,
-                                         const uint8_t ReportType,
-                                         void* ReportData,
-                                         uint16_t* const ReportSize)
-{
-	USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData;
-
-	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
-	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
-
-	if (JoyStatus_LCL & JOY_UP)
-	  MouseReport->Y = -1;
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  MouseReport->Y =  1;
-
-	if (JoyStatus_LCL & JOY_RIGHT)
-	  MouseReport->X =  1;
-	else if (JoyStatus_LCL & JOY_LEFT)
-	  MouseReport->X = -1;
-
-	if (JoyStatus_LCL & JOY_PRESS)
-	  MouseReport->Button |= (1 << 0);
-
-	if (ButtonStatus_LCL & BUTTONS_BUTTON1)
-	  MouseReport->Button |= (1 << 1);
-
-	*ReportSize = sizeof(USB_MouseReport_Data_t);
-	return true;
-}
-
-/** HID class driver callback function for the processing of HID reports from the host.
- *
- *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in] ReportID    Report ID of the received report from the host
- *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
- *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
- *  \param[in] ReportSize  Size in bytes of the received HID report
- */
-void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                          const uint8_t ReportID,
-                                          const uint8_t ReportType,
-                                          const void* ReportData,
-                                          const uint16_t ReportSize)
-{
-	// Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.h b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.h
deleted file mode 100644
index 96a766598a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DeviceFunctions.c.
- */
-
-#ifndef _MOUSE_DEVICE_FUNCTIONS_H_
-#define _MOUSE_DEVICE_FUNCTIONS_H_
-
-	/* Includes: */
-		#include "MouseHostDevice.h"
-
-	/* External Variables: */
-		extern USB_ClassInfo_HID_Device_t Mouse_HID_Device_Interface;
-
-	/* Function Prototypes: */
-		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                         uint8_t* const ReportID,
-		                                         const uint8_t ReportType,
-		                                         void* ReportData,
-		                                         uint16_t* const ReportSize);
-		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                          const uint8_t ReportID,
-		                                          const uint8_t ReportType,
-		                                          const void* ReportData,
-		                                          const uint16_t ReportSize);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c
deleted file mode 100644
index ad0268b24a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Host Mode USB Mouse functionality for the MouseHostDevice demo. This file contains the Host mode
- *  USB Mouse related code of the demo and is responsible for all the Host mode Mouse functionality.
- */
-
-#include "HostFunctions.h"
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Host_t Mouse_HID_Host_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-				.HIDInterfaceProtocol   = HID_CSCP_MouseBootProtocol,
-			},
-	};
-
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		printf("Error Retrieving Configuration Descriptor.\r\n");
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (HID_Host_ConfigurePipes(&Mouse_HID_Host_Interface,
-	                            ConfigDescriptorSize, ConfigDescriptorData) != HID_ENUMERROR_NoError)
-	{
-		printf("Attached Device Not a Valid Mouse.\r\n");
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		printf("Error Setting Device Configuration.\r\n");
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (HID_Host_SetBootProtocol(&Mouse_HID_Host_Interface) != HOST_SENDCONTROL_Successful)
-	{
-		printf("Could not Set Boot Protocol Mode.\r\n");
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	printf("Mouse Enumerated.\r\n");
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Host USB management task. This task handles the control of USB Mice while in USB Host mode,
- *  setting up the appropriate data pipes and processing reports from the attached device.
- */
-void MouseHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	if (HID_Host_IsReportReceived(&Mouse_HID_Host_Interface))
-	{
-		uint8_t LEDMask  = LEDS_NO_LEDS;
-
-		USB_MouseReport_Data_t MouseReport;
-		HID_Host_ReceiveReport(&Mouse_HID_Host_Interface, &MouseReport);
-
-		printf_P(PSTR("dX:%2d dY:%2d Button:%d\r\n"), MouseReport.X,
-		                                              MouseReport.Y,
-		                                              MouseReport.Button);
-		if (MouseReport.X > 0)
-		  LEDMask |= LEDS_LED1;
-		else if (MouseReport.X < 0)
-		  LEDMask |= LEDS_LED2;
-
-		if (MouseReport.Y > 0)
-		  LEDMask |= LEDS_LED3;
-		else if (MouseReport.Y < 0)
-		  LEDMask |= LEDS_LED4;
-
-		if (MouseReport.Button)
-		  LEDMask  = LEDS_ALL_LEDS;
-
-		LEDs_SetAllLEDs(LEDMask);
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.h b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.h
deleted file mode 100644
index aef2bacca5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for HostFunctions.c.
- */
-
-#ifndef _MOUSE_HOST_FUNCTIONS_H_
-#define _MOUSE_HOST_FUNCTIONS_H_
-
-	/* Includes: */
-		#include "MouseHostDevice.h"
-
-	/* External Variables: */
-		extern USB_ClassInfo_HID_Host_t Mouse_HID_Host_Interface;
-
-	/* Function Prototypes: */
-		void MouseHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c
deleted file mode 100644
index b8e98537d8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MouseHostDevice demo. This file contains the main tasks of
- *  the demo and is responsible for the overall control flow of the demo.
- */
-
-#include "MouseHostDevice.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Mouse Host/Device Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		/* Determine which USB mode we are currently in */
-		if (USB_CurrentMode == USB_MODE_Host)
-		{
-			MouseHost_Task();
-			HID_Host_USBTask(&Mouse_HID_Host_Interface);
-		}
-		else
-		{
-			HID_Device_USBTask(&Mouse_HID_Device_Interface);
-		}
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	Joystick_Init();
-	Buttons_Init();
-	USB_Init(USB_MODE_UID);
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the library USB mode change event. */
-void EVENT_USB_UIDChange(void)
-{
-	printf_P(PSTR(ESC_FG_YELLOW "UID Change to %S mode\r\n" ESC_FG_WHITE),
-	         (USB_CurrentMode == USB_MODE_Device) ? PSTR("Device") : PSTR("Host"));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h
deleted file mode 100644
index 258c7c1e8e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MouseHost.c.
- */
-
-#ifndef _MOUSE_HOST_DEVICE_H_
-#define _MOUSE_HOST_DEVICE_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "Descriptors.h"
-		#include "DeviceFunctions.h"
-		#include "HostFunctions.h"
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_UIDChange(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt
deleted file mode 100644
index d3fb9a5618..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Mouse Host/Device Dual Role Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Dual Mode Host/Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification, USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode, Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Mouse host/device dual role demonstration application. This gives a simple
- *  reference application for implementing a dual role USB Mouse, for USB mice
- *  using the standard mouse boot protocol HID profile.
- *
- *  <b>When in host mode:</b>
- *  Mouse movement and button presses are displayed on the board LEDs,
- *  as well as printed out the serial terminal as formatted dY, dY and
- *  button status information.
- *
- *  This uses a naive method where the mouse is set to Boot Protocol mode, so
- *  that the report structure is fixed and known. A better implementation
- *  uses the HID report parser for correct report data processing across
- *  all compatible mice with advanced characteristics, as shown in the
- *  MouseHostWithParser Host demo application.
- *
- *  Currently only single interface mice are supported.
- *
- *  <b>When in device mode:</b>
- *  Upon enumeration the system will automatically enumerate and function
- *  as a mouse when the USB connection to a host is present. To use
- *  the mouse, move the joystick to move the pointer, and push the
- *  joystick inwards to simulate a left-button click. The HWB serves as
- *  the right mouse button.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/asf.xml
deleted file mode 100644
index 7cd93babb0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/asf.xml
+++ /dev/null
@@ -1,56 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)" id="lufa.demos.dualrole.class.mouse.example.avr8">

-		<require idref="lufa.demos.dualrole.class.mouse"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.dualrole.class.mouse" caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Mouse host and device dual role demo, implementing a basic mouse device and host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Dual Role"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MouseHostDevice.txt"/>

-

-		<build type="c-source" value="MouseHostDevice.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="c-source" value="DeviceFunctions.c"/>

-		<build type="c-source" value="HostFunctions.c"/>

-		<build type="header-file" value="MouseHostDevice.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="header-file" value="DeviceFunctions.h"/>

-		<build type="header-file" value="HostFunctions.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.joystick"/>

-		<require idref="lufa.drivers.board.buttons"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/doxyfile
deleted file mode 100644
index 2c89342ab7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Mouse Host/Device Dual Role Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
deleted file mode 100644
index 929b668f74..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MouseHostDevice
-SRC          = $(TARGET).c Descriptors.c DeviceFunctions.c HostFunctions.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/makefile
deleted file mode 100644
index 763f850904..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/ClassDriver/makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-
-# Makefile to build all the LUFA Dual Role Demos. Call with "make all" to
-# rebuild all Dual Role demos.
-
-# Projects are pre-cleaned before each one is built, to ensure any
-# custom LUFA library build options are reflected in the compiled
-# code.
-
-PROJECT_DIRECTORIES := $(shell ls -d */)
-
-# This makefile is potentially infinitely recursive if something really bad
-# happens when determining the set of project directories - hard-abort if
-# more than 10 levels deep to avoid angry emails.
-ifeq ($(MAKELEVEL), 10)
-   $(error EMERGENCY ABORT: INFINITE RECURSION DETECTED)
-endif
-
-# Need to special-case building without a per-project object directory
-ifeq ($(OBJDIR),)
-   # If no target specified, force "clean all" and disallow parallel build
-   ifeq ($(MAKECMDGOALS),)
-      MAKECMDGOALS := clean all
-      .NOTPARALLEL:
-   endif
-
-   # If one of the targets is to build, force "clean" beforehand and disallow parallel build
-   ifneq ($(findstring all, $(MAKECMDGOALS)),)
-      MAKECMDGOALS := clean $(MAKECMDGOALS)
-      .NOTPARALLEL:
-   endif
-endif
-
-%: $(PROJECT_DIRECTORIES)
-	@echo . > /dev/null
-
-$(PROJECT_DIRECTORIES):
-	@$(MAKE) -C $@ $(MAKECMDGOALS)
-
-.PHONY: $(PROJECT_DIRECTORIES)
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/makefile
deleted file mode 100644
index f282d6f556..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/DualRole/makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-
-# Makefile to build all the LUFA Class Driver and Low Level Demos. Call with
-# "make all" to rebuild all demos of both types.
-
-# Projects are pre-cleaned before each one is built, to ensure any
-# custom LUFA library build options are reflected in the compiled
-# code.
-
-all:
-
-%:
-	$(MAKE) -C ClassDriver $@
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.c
deleted file mode 100644
index 8260ba9b9c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the AndroidAccessoryHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "AndroidAccessoryHost.h"
-
-/** LUFA Android Open Accessory Class driver interface configuration and state information. This
- *  structure is passed to all Android Open Accessory Class driver functions, so that multiple
- *  instances of the same class within a device can be differentiated from one another.
- */
-USB_ClassInfo_AOA_Host_t AndroidDevice_AOA_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-				.PropertyStrings =
-					{
-						[AOA_STRING_Manufacturer] = "Dean Camera",
-						[AOA_STRING_Model]        = "LUFA Android Demo",
-						[AOA_STRING_Description]  = "LUFA Android Demo",
-						[AOA_STRING_Version]      = "1.0",
-						[AOA_STRING_URI]          = "http://www.lufa-lib.org",
-						[AOA_STRING_Serial]       = "0000000012345678",
-					},
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Android Accessory Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		AOAHost_Task();
-
-		AOA_Host_USBTask(&AndroidDevice_AOA_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Task to manage an enumerated USB Android Accessory device once connected, to print received data
- *  from the device to the serial port.
- */
-void AOAHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	if (AOA_Host_BytesReceived(&AndroidDevice_AOA_Interface))
-	{
-		/* Echo received bytes from the attached device through the USART */
-		int16_t ReceivedByte = AOA_Host_ReceiveByte(&AndroidDevice_AOA_Interface);
-		if (!(ReceivedByte < 0))
-		{
-			/* Turn on and off LED1 based on the bytes received */
-			LEDs_ChangeLEDs(LEDS_LED1, ReceivedByte ? LEDS_LED1 : LEDS_NO_LEDS);
-
-			putchar(ReceivedByte);
-		}
-	}
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	USB_Descriptor_Device_t DeviceDescriptor;
-
-	if (USB_Host_GetDeviceDescriptor(&DeviceDescriptor) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Device Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	bool NeedModeSwitch;
-	if (!(AOA_Host_ValidateAccessoryDevice(&AndroidDevice_AOA_Interface, &DeviceDescriptor, &NeedModeSwitch)))
-	{
-		puts_P(PSTR("Not an Android device.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (NeedModeSwitch)
-	{
-		puts_P(PSTR("Not in Accessory mode, switching...\r\n"));
-		AOA_Host_StartAccessoryMode(&AndroidDevice_AOA_Interface);
-		return;
-	}
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (AOA_Host_ConfigurePipes(&AndroidDevice_AOA_Interface,
-	                            ConfigDescriptorSize, ConfigDescriptorData) != AOA_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid Android Accessory Class Device.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	puts_P(PSTR("Android Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.h
deleted file mode 100644
index 81bbb7bae4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for AndroidAccessoryHost.c.
- */
-
-#ifndef _ANDROIDACCESSORY_HOST_H_
-#define _ANDROIDACCESSORY_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void AOAHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.txt
deleted file mode 100644
index 63d192d1a5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Android Accessory Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Android Accessory Host Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>Android Accessory Host Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Android Accessory Host demonstration application. This gives a simple reference
- *  application for implementing an Android Accessory Host device capable of hosting
- *  Android powered mobile devices to send and receive data.
- *
- *  Data sent from the Android device will be sent out the AVR's serial port.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidHostApp/AndroidHostApp.zip b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidHostApp/AndroidHostApp.zip
deleted file mode 100644
index c433d79e16..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidHostApp/AndroidHostApp.zip
+++ /dev/null
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/Config/LUFAConfig.h
deleted file mode 100644
index 884b503985..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-		#define HOST_DEVICE_SETTLE_DELAY_MS	     0
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/asf.xml
deleted file mode 100644
index 59efae3610..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/asf.xml
+++ /dev/null
@@ -1,49 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Android Accessory Host Demo (Class Driver APIs)" id="lufa.demos.host.class.android.example.avr8">

-		<require idref="lufa.demos.host.class.android"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.class.android" caption="Android Accessory Host Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Android Accessory Host demo, implementing a basic USB device whose LEDs can be controlled via an Android device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="Android Accessory Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="AndroidAccessoryHost.txt"/>

-		<build type="distribute" subtype="directory" value="AndroidHostApp"/>

-

-		<build type="c-source" value="AndroidAccessoryHost.c"/>

-		<build type="header-file" value="AndroidAccessoryHost.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/doxyfile
deleted file mode 100644
index a17aa3bb06..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Android Accessory Mode Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/makefile
deleted file mode 100644
index 24b7a5bbc9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AndroidAccessoryHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = AndroidAccessoryHost
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c
deleted file mode 100644
index ad78d2f8a7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the AudioInputHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "AudioInputHost.h"
-
-/** LUFA Audio Class driver interface configuration and state information. This structure is
- *  passed to all Audio Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_Audio_Host_t Microphone_Audio_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-					},
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Audio Input Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		Audio_Host_USBTask(&Microphone_Audio_Interface);
-		USB_USBTask();
-	}
-}
-
-/** ISR to handle the reloading of the PWM timer with the next sample. */
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)
-{
-	uint8_t PrevPipe = Pipe_GetCurrentPipe();
-
-	/* Check that the USB bus is ready for the next sample to read */
-	if (Audio_Host_IsSampleReceived(&Microphone_Audio_Interface))
-	{
-		/* Retrieve the signed 16-bit audio sample, convert to 8-bit */
-		int8_t Sample_8Bit = (Audio_Host_ReadSample16(&Microphone_Audio_Interface) >> 8);
-
-		/* Load the sample into the PWM timer channel */
-		OCR3A = (Sample_8Bit ^ (1 << 7));
-
-		uint8_t LEDMask = LEDS_NO_LEDS;
-
-		/* Turn on LEDs as the sample amplitude increases */
-		if (Sample_8Bit > 16)
-		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4);
-		else if (Sample_8Bit > 8)
-		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3);
-		else if (Sample_8Bit > 4)
-		  LEDMask = (LEDS_LED1 | LEDS_LED2);
-		else if (Sample_8Bit > 2)
-		  LEDMask = (LEDS_LED1);
-
-		LEDs_SetAllLEDs(LEDMask);
-	}
-
-	Pipe_SelectPipe(PrevPipe);
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (Audio_Host_ConfigurePipes(&Microphone_Audio_Interface,
-	                              ConfigDescriptorSize, ConfigDescriptorData) != AUDIO_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid Audio Input Device.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (Audio_Host_StartStopStreaming(&Microphone_Audio_Interface, true) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Enabling Audio Stream.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);
-	if (Audio_Host_GetSetEndpointProperty(&Microphone_Audio_Interface, Microphone_Audio_Interface.Config.DataINPipe.Address,
-	                                      AUDIO_REQ_SetCurrent, AUDIO_EPCONTROL_SamplingFreq,
-	                                      sizeof(SampleRate), &SampleRate) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Audio Sampling Frequency.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Sample reload timer initialization */
-	TIMSK0  = (1 << OCIE0A);
-	OCR0A   = ((F_CPU / 8 / 48000) - 1);
-	TCCR0A  = (1 << WGM01);  // CTC mode
-	TCCR0B  = (1 << CS01);   // Fcpu/8 speed
-
-	/* Set speaker as output */
-	DDRC   |= (1 << 6);
-
-	/* PWM speaker timer initialization */
-	TCCR3A  = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)); // Set on match, clear on TOP
-	TCCR3B  = ((1 << WGM32) | (1 << CS30));  // Fast 8-Bit PWM, F_CPU speed
-
-	puts_P(PSTR("Audio Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.h
deleted file mode 100644
index eb27bb572a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for AudioInputHost.c.
- */
-
-#ifndef _AUDIO_INPUT_HOST_H_
-#define _AUDIO_INPUT_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.txt
deleted file mode 100644
index 0736e0df47..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Audio Input Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Standard Audio Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Audio 1.0 Class Specification \n
- *        USBIF Audio 1.0 Class Terminal Types Specification \n
- *        USBIF Audio 1.0 Data Formats Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Audio Input host demonstration application. This gives a simple reference
- *  application for implementing a USB Audio host, for USB Audio devices using
- *  the USB Audio 1.0 class profile.
- *
- *  Incoming audio will output in 8-bit PWM onto the timer 3 output compare
- *  channel A, and will also be indicated on the board LEDs. Decouple the PWM
- *  output with a capacitor and attach to a speaker to hear the audio.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/asf.xml
deleted file mode 100644
index c2daffbdf7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/asf.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Audio Input Host Demo (Class Driver APIs)" id="lufa.demos.host.class.audio_input.example.avr8">

-		<require idref="lufa.demos.host.class.audio_input"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.class.audio_input" caption="Audio Input Host Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Audio Input Host demo, implementing a basic USB audio sink that can output incoming audio data to a speaker. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="Audio Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="AudioInputHost.txt"/>

-

-		<build type="c-source" value="AudioInputHost.c"/>

-		<build type="header-file" value="AudioInputHost.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/doxyfile
deleted file mode 100644
index 2440541f8c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Audio Input Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/makefile
deleted file mode 100644
index 2447c8da91..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioInputHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = AudioInputHost
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c
deleted file mode 100644
index 958d3589ff..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the AudioOutputHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "AudioOutputHost.h"
-
-/** LUFA Audio Class driver interface configuration and state information. This structure is
- *  passed to all Audio Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_Audio_Host_t Speaker_Audio_Interface =
-	{
-		.Config =
-			{
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-					},
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Audio Output Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		Audio_Host_USBTask(&Speaker_Audio_Interface);
-		USB_USBTask();
-	}
-}
-
-/** ISR to handle the reloading of the PWM timer with the next sample. */
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)
-{
-	uint8_t PrevPipe = Pipe_GetCurrentPipe();
-
-	/* Check that the USB bus is ready for the next sample to write */
-	if (Audio_Host_IsReadyForNextSample(&Speaker_Audio_Interface))
-	{
-		int16_t AudioSample;
-
-		#if defined(USE_TEST_TONE)
-			static uint8_t SquareWaveSampleCount;
-			static int16_t CurrentWaveValue;
-
-			/* In test tone mode, generate a square wave at 1/256 of the sample rate */
-			if (SquareWaveSampleCount++ == 0xFF)
-			  CurrentWaveValue ^= 0x8000;
-
-			/* Only generate audio if the board button is being pressed */
-			AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;
-		#else
-			/* Audio sample is ADC value scaled to fit the entire range */
-			AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());
-
-			#if defined(MICROPHONE_BIASED_TO_HALF_RAIL)
-			/* Microphone is biased to half rail voltage, subtract the bias from the sample value */
-			AudioSample -= (SAMPLE_MAX_RANGE / 2);
-			#endif
-		#endif
-
-		Audio_Host_WriteSample16(&Speaker_Audio_Interface, AudioSample);
-		Audio_Host_WriteSample16(&Speaker_Audio_Interface, AudioSample);
-	}
-
-	Pipe_SelectPipe(PrevPipe);
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	Buttons_Init();
-	ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
-	ADC_SetupChannel(MIC_IN_ADC_CHANNEL);
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-
-	/* Start the ADC conversion in free running mode */
-	ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (Audio_Host_ConfigurePipes(&Speaker_Audio_Interface,
-	                              ConfigDescriptorSize, ConfigDescriptorData) != AUDIO_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid Audio Output Device.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (Audio_Host_StartStopStreaming(&Speaker_Audio_Interface, true) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Enabling Audio Stream.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);
-	if (Audio_Host_GetSetEndpointProperty(&Speaker_Audio_Interface, Speaker_Audio_Interface.Config.DataOUTPipe.Address,
-	                                      AUDIO_REQ_SetCurrent, AUDIO_EPCONTROL_SamplingFreq,
-	                                      sizeof(SampleRate), &SampleRate) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Audio Sampling Frequency.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Sample reload timer initialization */
-	TIMSK0  = (1 << OCIE0A);
-	OCR0A   = ((F_CPU / 8 / 48000) - 1);
-	TCCR0A  = (1 << WGM01);  // CTC mode
-	TCCR0B  = (1 << CS01);   // Fcpu/8 speed
-
-	puts_P(PSTR("Audio Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h
deleted file mode 100644
index 677d8671eb..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for AudioOutputHost.c.
- */
-
-#ifndef _AUDIO_OUTPUT_HOST_H_
-#define _AUDIO_OUTPUT_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Peripheral/ADC.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Maximum audio sample value for the microphone input. */
-		#define SAMPLE_MAX_RANGE          0xFFFF
-
-		/** Maximum ADC range for the microphone input. */
-		#define ADC_MAX_RANGE             0x3FF
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt
deleted file mode 100644
index 5e79a33e38..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Audio Output Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Standard Audio Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Audio 1.0 Class Specification \n
- *        USBIF Audio 1.0 Class Terminal Types Specification \n
- *        USBIF Audio 1.0 Data Formats Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Audio Output host demonstration application. This gives a simple reference
- *  application for implementing a USB Audio host, for USB Audio devices using
- *  the USB Audio 1.0 class profile.
- *
- *  By default, the demo will produce a square wave test tone when the board
- *  button is pressed. If USE_TEST_TONE is not defined in the project makefile,
- *  incoming audio from the ADC channel 1 will be sampled and sent to the attached
- *  USB audio device instead.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>MIC_IN_ADC_CHANNEL</td>
- *    <td>AppConfig.h</td>
- *    <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
- *   </tr>
- *   <tr>
- *    <td>USE_TEST_TONE</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
- *        instead of sampling the board microphone.</td>
- *   </tr>
- *   <tr>
- *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/Config/AppConfig.h
deleted file mode 100644
index 8360102f64..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/Config/AppConfig.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define MIC_IN_ADC_CHANNEL               2
-
-	#define MICROPHONE_BIASED_TO_HALF_RAIL
-	#define USE_TEST_TONE
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/asf.xml
deleted file mode 100644
index 6bd97286bd..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/asf.xml
+++ /dev/null
@@ -1,52 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Audio Output Host Demo (Class Driver APIs)" id="lufa.demos.host.class.audio_output.example.avr8">

-		<require idref="lufa.demos.host.class.audio_output"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.class.audio_output" caption="Audio Output Host Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Audio Output Host demo, implementing a basic USB audio source that can output audio data to an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="Audio Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="AudioOutputHost.txt"/>

-

-		<build type="c-source" value="AudioOutputHost.c"/>

-		<build type="header-file" value="AudioOutputHost.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.peripheral.adc"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/doxyfile
deleted file mode 100644
index 29cf0ddacc..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Audio Output Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/makefile
deleted file mode 100644
index 016ddf45d3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/AudioOutputHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = AudioOutputHost
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c
deleted file mode 100644
index 7bae451a72..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the JoystickHostWithParser demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "JoystickHostWithParser.h"
-
-/** Processed HID report descriptor items structure, containing information on each HID report element */
-static HID_ReportInfo_t HIDReportInfo;
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Host_t Joystick_HID_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-				.HIDInterfaceProtocol   = HID_CSCP_NonBootProtocol,
-				.HIDParserData          = &HIDReportInfo
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Joystick Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		JoystickHost_Task();
-
-		HID_Host_USBTask(&Joystick_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Task to manage an enumerated USB joystick once connected, to display movement
- *  data as it is received.
- */
-void JoystickHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	if (HID_Host_IsReportReceived(&Joystick_HID_Interface))
-	{
-		uint8_t JoystickReport[Joystick_HID_Interface.State.LargestReportSize];
-		HID_Host_ReceiveReport(&Joystick_HID_Interface, &JoystickReport);
-
-		uint8_t LEDMask = LEDS_NO_LEDS;
-
-		for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++)
-		{
-			HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber];
-
-			/* Update the report item value if it is contained within the current report */
-			if (!(USB_GetHIDReportItemInfo(JoystickReport, ReportItem)))
-			  continue;
-
-			/* Determine what report item is being tested, process updated value as needed */
-			if ((ReportItem->Attributes.Usage.Page        == USAGE_PAGE_BUTTON) &&
-			    (ReportItem->ItemType                     == HID_REPORT_ITEM_In))
-			{
-				if (ReportItem->Value)
-				  LEDMask = LEDS_ALL_LEDS;
-			}
-			else if ((ReportItem->Attributes.Usage.Page   == USAGE_PAGE_GENERIC_DCTRL) &&
-			         ((ReportItem->Attributes.Usage.Usage == USAGE_X)                  ||
-			          (ReportItem->Attributes.Usage.Usage == USAGE_Y))                 &&
-			         (ReportItem->ItemType                == HID_REPORT_ITEM_In))
-			{
-				int16_t DeltaMovement = HID_ALIGN_DATA(ReportItem, int16_t);
-
-				if (DeltaMovement)
-				{
-					if (ReportItem->Attributes.Usage.Usage == USAGE_X)
-					  LEDMask |= ((DeltaMovement > 0) ? LEDS_LED1 : LEDS_LED2);
-					else
-					  LEDMask |= ((DeltaMovement > 0) ? LEDS_LED3 : LEDS_LED4);
-				}
-			}
-		}
-
-		LEDs_SetAllLEDs(LEDMask);
-	}
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (HID_Host_ConfigurePipes(&Joystick_HID_Interface,
-	                            ConfigDescriptorSize, ConfigDescriptorData) != HID_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid Joystick.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (HID_Host_SetReportProtocol(&Joystick_HID_Interface) != 0)
-	{
-		puts_P(PSTR("Error Setting Report Protocol Mode or Not a Valid Joystick.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Joystick Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Callback for the HID Report Parser. This function is called each time the HID report parser is about to store
- *  an IN, OUT or FEATURE item into the HIDReportInfo structure. To save on RAM, we are able to filter out items
- *  we aren't interested in (preventing us from being able to extract them later on, but saving on the RAM they would
- *  have occupied).
- *
- *  \param[in] CurrentItem  Pointer to the item the HID report parser is currently working with
- *
- *  \return Boolean \c true if the item should be stored into the HID report structure, \c false if it should be discarded
- */
-bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem)
-{
-	bool IsJoystick = false;
-
-	/* Iterate through the item's collection path, until either the root collection node or a collection with the
-	 * Joystick Usage is found - this prevents Mice, which use identical descriptors except for the Joystick usage
-	 * parent node, from being erroneously treated as a joystick by the demo
-	 */
-	for (HID_CollectionPath_t* CurrPath = CurrentItem->CollectionPath; CurrPath != NULL; CurrPath = CurrPath->Parent)
-	{
-		if ((CurrPath->Usage.Page  == USAGE_PAGE_GENERIC_DCTRL) &&
-		    (CurrPath->Usage.Usage == USAGE_JOYSTICK))
-		{
-			IsJoystick = true;
-			break;
-		}
-	}
-
-	/* If a collection with the joystick usage was not found, indicate that we are not interested in this item */
-	if (!IsJoystick)
-	  return false;
-
-	/* Check the attributes of the current item - see if we are interested in it or not;
-	 * only store BUTTON and GENERIC_DESKTOP_CONTROL items into the Processed HID Report
-	 * structure to save RAM and ignore the rest
-	 */
-	return ((CurrentItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) ||
-	        (CurrentItem->Attributes.Usage.Page == USAGE_PAGE_GENERIC_DCTRL));
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.h
deleted file mode 100644
index a4d06e5f4e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for JoystickHostWithParser.c.
- */
-
-#ifndef _JOYSTICK_HOST_H_
-#define _JOYSTICK_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY         LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING     (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY           (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR           (LEDS_LED1 | LEDS_LED3)
-
-		/** HID Report Descriptor Usage Page value for a toggle button. */
-		#define USAGE_PAGE_BUTTON           0x09
-
-		/** HID Report Descriptor Usage Page value for a Generic Desktop Control. */
-		#define USAGE_PAGE_GENERIC_DCTRL    0x01
-
-		/** HID Report Descriptor Usage for a Joystick. */
-		#define USAGE_JOYSTICK              0x04
-
-		/** HID Report Descriptor Usage value for a X axis movement. */
-		#define USAGE_X                     0x30
-
-		/** HID Report Descriptor Usage value for a Y axis movement. */
-		#define USAGE_Y                     0x31
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void JoystickHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-		bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt
deleted file mode 100644
index 9eba4ed864..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Joystick Host With HID Descriptor Parser Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Joystick host demonstration application. This gives a simple reference
- *  application for implementing a USB Joystick host, for USB joysticks using
- *  the standard joystick HID profile. It uses a HID parser for the HID
- *  reports, allowing for correct operation across all USB joysticks. This
- *  demo supports joysticks with a single HID report.
- *
- *  Joystick movement and button presses are displayed on the board LEDs.
- *  On connection to a USB joystick, the report items will be processed and
- *  printed as a formatted list through the USART before the joystick is
- *  fully enumerated.
- *
- *  Currently only single interface joysticks are supported.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/asf.xml
deleted file mode 100644
index 8899d81393..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/asf.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Joystick HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.joystick_parser.example.avr8">

-		<require idref="lufa.demos.host.class.joystick_parser"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.class.joystick_parser" caption="Joystick HID (with parser) Host Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Joystick HID Host demo with HID parser, implementing a basic USB joystick host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="JoystickHostWithParser.txt"/>

-

-		<build type="c-source" value="JoystickHostWithParser.c"/>

-		<build type="header-file" value="JoystickHostWithParser.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/doxyfile
deleted file mode 100644
index 5af83f00d5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Joystick Host Demo (Using HID Descriptor Parser)"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
deleted file mode 100644
index 7b613fce62..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = JoystickHostWithParser
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c
deleted file mode 100644
index 59ae85c9cf..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the KeyboardHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "KeyboardHost.h"
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Host_t Keyboard_HID_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-				.HIDInterfaceProtocol   = HID_CSCP_KeyboardBootProtocol,
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Keyboard Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		KeyboardHost_Task();
-
-		HID_Host_USBTask(&Keyboard_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Task to manage an enumerated USB keyboard once connected, to display key state
- *  data as it is received.
- */
-void KeyboardHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	if (HID_Host_IsReportReceived(&Keyboard_HID_Interface))
-	{
-		USB_KeyboardReport_Data_t KeyboardReport;
-		HID_Host_ReceiveReport(&Keyboard_HID_Interface, &KeyboardReport);
-
-		LEDs_ChangeLEDs(LEDS_LED1, (KeyboardReport.Modifier) ? LEDS_LED1 : 0);
-
-		uint8_t KeyCode = KeyboardReport.KeyCode[0];
-
-		if (KeyCode)
-		{
-			char PressedKey = 0;
-
-			LEDs_ToggleLEDs(LEDS_LED2);
-
-			/* Retrieve pressed key character if alphanumeric */
-			if ((KeyCode >= HID_KEYBOARD_SC_A) && (KeyCode <= HID_KEYBOARD_SC_Z))
-			{
-				PressedKey = (KeyCode - HID_KEYBOARD_SC_A) + 'A';
-			}
-			else if ((KeyCode >= HID_KEYBOARD_SC_1_AND_EXCLAMATION) &
-			         (KeyCode  < HID_KEYBOARD_SC_0_AND_CLOSING_PARENTHESIS))
-			{
-				PressedKey = (KeyCode - HID_KEYBOARD_SC_1_AND_EXCLAMATION) + '1';
-			}
-			else if (KeyCode == HID_KEYBOARD_SC_0_AND_CLOSING_PARENTHESIS)
-			{
-				PressedKey = '0';
-			}
-			else if (KeyCode == HID_KEYBOARD_SC_SPACE)
-			{
-				PressedKey = ' ';
-			}
-			else if (KeyCode == HID_KEYBOARD_SC_ENTER)
-			{
-				PressedKey = '\n';
-			}
-
-			if (PressedKey)
-			  putchar(PressedKey);
-		}
-	}
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (HID_Host_ConfigurePipes(&Keyboard_HID_Interface,
-	                            ConfigDescriptorSize, ConfigDescriptorData) != HID_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid Keyboard.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (HID_Host_SetBootProtocol(&Keyboard_HID_Interface) != 0)
-	{
-		puts_P(PSTR("Could not Set Boot Protocol Mode.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Keyboard Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.h
deleted file mode 100644
index 8c8526419e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for KeyboardHost.c.
- */
-
-#ifndef _KEYBOARD_HOST_H_
-#define _KEYBOARD_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void KeyboardHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.txt
deleted file mode 100644
index 49cc672a4c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Keyboard Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification, USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode, Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Keyboard host demonstration application. This gives a simple reference
- *  application for implementing a USB keyboard host, for USB keyboards using
- *  the standard keyboard HID profile.
- *
- *  Pressed alpha-numeric, enter or space key is transmitted through the serial
- *  USART at serial settings 9600, 8, N, 1.
- *
- *  This uses a naive method where the keyboard is set to Boot Protocol mode, so
- *  that the report structure is fixed and known. A better implementation
- *  uses the HID report parser for correct report data processing across
- *  all compatible mice with advanced characteristics, as shown in the
- *  KeyboardHostWithParser demo application.
- *
- *  Currently only single interface keyboards are supported.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/asf.xml
deleted file mode 100644
index 46cd71fe71..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/asf.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Keyboard HID Host Demo (Class Driver APIs)" id="lufa.demos.host.class.keyboard.example.avr8">

-		<require idref="lufa.demos.host.class.keyboard"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.class.keyboard" caption="Keyboard HID Host Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Keyboard HID Host demo, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="KeyboardHost.txt"/>

-

-		<build type="c-source" value="KeyboardHost.c"/>

-		<build type="header-file" value="KeyboardHost.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/doxyfile
deleted file mode 100644
index 6ac6b05252..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Keyboard Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/makefile
deleted file mode 100644
index 435e4942fa..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = KeyboardHost
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c
deleted file mode 100644
index 5864e32de0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the KeyboardHostWithParser demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "KeyboardHostWithParser.h"
-
-/** Processed HID report descriptor items structure, containing information on each HID report element */
-static HID_ReportInfo_t HIDReportInfo;
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Host_t Keyboard_HID_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-				.HIDInterfaceProtocol   = HID_CSCP_NonBootProtocol,
-				.HIDParserData          = &HIDReportInfo
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Keyboard Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		KeyboardHost_Task();
-
-		HID_Host_USBTask(&Keyboard_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Task to manage an enumerated USB keyboard once connected, to display key state
- *  data as it is received.
- */
-void KeyboardHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	if (HID_Host_IsReportReceived(&Keyboard_HID_Interface))
-	{
-		uint8_t KeyboardReport[Keyboard_HID_Interface.State.LargestReportSize];
-		HID_Host_ReceiveReport(&Keyboard_HID_Interface, &KeyboardReport);
-
-		for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++)
-		{
-			HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber];
-
-			/* Update the report item value if it is contained within the current report */
-			if (!(USB_GetHIDReportItemInfo(KeyboardReport, ReportItem)))
-			  continue;
-
-			/* Determine what report item is being tested, process updated value as needed */
-			if ((ReportItem->Attributes.Usage.Page      == USAGE_PAGE_KEYBOARD) &&
-				(ReportItem->Attributes.BitSize         == 8)                   &&
-				(ReportItem->Attributes.Logical.Maximum > 1)                    &&
-				(ReportItem->ItemType                   == HID_REPORT_ITEM_In))
-			{
-				/* Key code is an unsigned char in length, cast to the appropriate type */
-				uint8_t KeyCode = (uint8_t)ReportItem->Value;
-
-				/* If scan-code is non-zero, a key is being pressed */
-				if (KeyCode)
-				{
-					/* Toggle status LED to indicate keypress */
-					LEDs_ToggleLEDs(LEDS_LED2);
-
-					char PressedKey = 0;
-
-					/* Convert scan-code to printable character if alphanumeric */
-					if ((KeyCode >= HID_KEYBOARD_SC_A) && (KeyCode <= HID_KEYBOARD_SC_Z))
-					{
-						PressedKey = (KeyCode - HID_KEYBOARD_SC_A) + 'A';
-					}
-					else if ((KeyCode >= HID_KEYBOARD_SC_1_AND_EXCLAMATION) &
-							 (KeyCode  < HID_KEYBOARD_SC_0_AND_CLOSING_PARENTHESIS))
-					{
-						PressedKey = (KeyCode - HID_KEYBOARD_SC_1_AND_EXCLAMATION) + '1';
-					}
-					else if (KeyCode == HID_KEYBOARD_SC_0_AND_CLOSING_PARENTHESIS)
-					{
-						PressedKey = '0';
-					}
-					else if (KeyCode == HID_KEYBOARD_SC_SPACE)
-					{
-						PressedKey = ' ';
-					}
-					else if (KeyCode == HID_KEYBOARD_SC_ENTER)
-					{
-						PressedKey = '\n';
-					}
-
-					/* Print the pressed key character out through the serial port if valid */
-					if (PressedKey)
-					  putchar(PressedKey);
-				}
-
-				/* Once a scan-code is found, stop scanning through the report items */
-				break;
-			}
-		}
-	}
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (HID_Host_ConfigurePipes(&Keyboard_HID_Interface,
-	                            ConfigDescriptorSize, ConfigDescriptorData) != HID_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid Keyboard.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (HID_Host_SetReportProtocol(&Keyboard_HID_Interface) != 0)
-	{
-		puts_P(PSTR("Error Setting Report Protocol Mode or Not a Valid Keyboard.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Keyboard Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Callback for the HID Report Parser. This function is called each time the HID report parser is about to store
- *  an IN, OUT or FEATURE item into the HIDReportInfo structure. To save on RAM, we are able to filter out items
- *  we aren't interested in (preventing us from being able to extract them later on, but saving on the RAM they would
- *  have occupied).
- *
- *  \param[in] CurrentItem  Pointer to the item the HID report parser is currently working with
- *
- *  \return Boolean \c true if the item should be stored into the HID report structure, \c false if it should be discarded
- */
-bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem)
-{
-	/* Check the attributes of the current item - see if we are interested in it or not;
-	 * only store KEYBOARD usage page items into the Processed HID Report structure to
-	 * save RAM and ignore the rest
-	 */
-	return (CurrentItem->Attributes.Usage.Page == USAGE_PAGE_KEYBOARD);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.h
deleted file mode 100644
index bd0049472d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for KeyboardHostWithParser.c.
- */
-
-#ifndef _KEYBOARD_HOST_H_
-#define _KEYBOARD_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** HID Report Descriptor Usage Page value for a desktop keyboard. */
-		#define USAGE_PAGE_KEYBOARD      0x07
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void KeyboardHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-		bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.txt
deleted file mode 100644
index 4c87965ca4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Keyboard Host With HID Descriptor Parser Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Keyboard host demonstration application. This gives a simple reference
- *  application for implementing a USB Keyboard host, for USB keyboards using
- *  the standard Keyboard HID profile. It uses a HID parser for the HID reports,
- *  allowing for correct operation across all USB keyboards. This demo supports
- *  keyboards with a single HID report.
- *
- *  Pressed alpha-numeric, enter or space key is transmitted through the serial
- *  USART at serial settings 9600, 8, N, 1. On connection to a USB keyboard, the
- *  report items will be processed and printed as a formatted list through the
- *  USART before the keyboard is fully enumerated.
- *
- *  Currently only single interface keyboards are supported.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/asf.xml
deleted file mode 100644
index 924299f2fe..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/asf.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Keyboard HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.keyboard_parser.example.avr8">

-		<require idref="lufa.demos.host.class.keyboard_parser"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.class.keyboard_parser" caption="Keyboard HID (with parser) Host Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Keyboard HID Host demo with HID parser, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="KeyboardHostWithParser.txt"/>

-

-		<build type="c-source" value="KeyboardHostWithParser.c"/>

-		<build type="header-file" value="KeyboardHostWithParser.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/doxyfile
deleted file mode 100644
index e014d3ed70..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Keyboard Host Demo (Using HID Descriptor Parser)"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
deleted file mode 100644
index bef6b416d6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = KeyboardHostWithParser
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c
deleted file mode 100644
index eb350c0e05..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MIDIHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "MIDIHost.h"
-
-/** LUFA MIDI Class driver interface configuration and state information. This structure is
- *  passed to all MIDI Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_MIDI_Host_t Keyboard_MIDI_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "MIDI Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		JoystickHost_Task();
-
-		MIDI_Host_USBTask(&Keyboard_MIDI_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	Buttons_Init();
-	Joystick_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Task to manage an enumerated USB MIDI device once connected, to display received
- *  note events from the host and send note changes in response to the board's joystick.
- */
-void JoystickHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	MIDI_EventPacket_t MIDIEvent;
-	while (MIDI_Host_ReceiveEventPacket(&Keyboard_MIDI_Interface, &MIDIEvent))
-	{
-		bool NoteOnEvent  = (MIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON));
-		bool NoteOffEvent = (MIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_OFF));
-
-		/* Display note events from the host */
-		if (NoteOnEvent || NoteOffEvent)
-		{
-			printf_P(PSTR("MIDI Note %s - Channel %d, Pitch %d, Velocity %d\r\n"), NoteOnEvent ? "On" : "Off",
-																				   ((MIDIEvent.Data1 & 0x0F) + 1),
-																				   MIDIEvent.Data2, MIDIEvent.Data3);
-		}
-	}
-
-	CheckJoystickMovement();
-}
-
-/** Checks for movement of the board's joystick, and sends corresponding MIDI note on/off
- *  messages to the host.
- */
-void CheckJoystickMovement(void)
-{
-	static uint8_t PrevJoystickStatus;
-
-	uint8_t MIDICommand = 0;
-	uint8_t MIDIPitch;
-
-	/* Get current joystick mask, XOR with previous to detect joystick changes */
-	uint8_t JoystickStatus  = Joystick_GetStatus();
-	uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);
-
-	/* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */
-	uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1));
-
-	if (JoystickChanges & JOY_LEFT)
-	{
-		MIDICommand = ((JoystickStatus & JOY_LEFT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3C;
-	}
-	else if (JoystickChanges & JOY_UP)
-	{
-		MIDICommand = ((JoystickStatus & JOY_UP)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3D;
-	}
-	else if (JoystickChanges & JOY_RIGHT)
-	{
-		MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3E;
-	}
-	else if (JoystickChanges & JOY_DOWN)
-	{
-		MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3F;
-	}
-	else if (JoystickChanges & JOY_PRESS)
-	{
-		MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-		MIDIPitch   = 0x3B;
-	}
-
-	if (MIDICommand)
-	{
-		MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
-			{
-				.Event       = MIDI_EVENT(0, MIDICommand),
-
-				.Data1       = MIDICommand | Channel,
-				.Data2       = MIDIPitch,
-				.Data3       = MIDI_STANDARD_VELOCITY,
-			};
-
-		MIDI_Host_SendEventPacket(&Keyboard_MIDI_Interface, &MIDIEvent);
-		MIDI_Host_Flush(&Keyboard_MIDI_Interface);
-	}
-
-	PrevJoystickStatus = JoystickStatus;
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (MIDI_Host_ConfigurePipes(&Keyboard_MIDI_Interface,
-	                             ConfigDescriptorSize, ConfigDescriptorData) != MIDI_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid MIDI Class Device.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	puts_P(PSTR("MIDI Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/MIDIHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/MIDIHost.h
deleted file mode 100644
index a50a9bb28c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/MIDIHost.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MIDIHost.c.
- */
-
-#ifndef _MIDI_HOST_H_
-#define _MIDI_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void CheckJoystickMovement(void);
-		void JoystickHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt
deleted file mode 100644
index 33a8319f06..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage MIDI Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>MIDI Subclass</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF USB MIDI Audio Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incoming MIDI note
- *  on and off messages on any channel to the serial port. Pressing the board joystick will send note on and off messages to
- *  the attached MIDI device, with the board HWB controlling the note channel.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/asf.xml
deleted file mode 100644
index 140c03ba72..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/asf.xml
+++ /dev/null
@@ -1,50 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="MIDI Host Demo (Class Driver APIs)" id="lufa.demos.host.class.midi.example.avr8">

-		<require idref="lufa.demos.host.class.midi"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.class.midi" caption="MIDI Host Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		MIDI Host demo, capable of sending and receiving MIDI messages to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="MIDI Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MIDIHost.txt"/>

-

-		<build type="c-source" value="MIDIHost.c"/>

-		<build type="header-file" value="MIDIHost.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-		<require idref="lufa.drivers.board.joystick"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/doxyfile
deleted file mode 100644
index d675057e9b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - MIDI Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/makefile
deleted file mode 100644
index 11314bf1c2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MIDIHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MIDIHost
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/Config/LUFAConfig.h
deleted file mode 100644
index 539b0a694d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-		#define USB_STREAM_TIMEOUT_MS            5000
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c
deleted file mode 100644
index 4e0739a00f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MassStorageHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "MassStorageHost.h"
-
-/** LUFA Mass Storage Class driver interface configuration and state information. This structure is
- *  passed to all Mass Storage Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_MS_Host_t FlashDisk_MS_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Mass Storage Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		MassStorageHost_Task();
-
-		MS_Host_USBTask(&FlashDisk_MS_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Task to manage an enumerated USB Mass Storage device once connected, to print out
- *  data from the device.
- */
-void MassStorageHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-	puts_P(PSTR("Waiting until ready...\r\n"));
-
-	for (;;)
-	{
-		uint8_t ErrorCode = MS_Host_TestUnitReady(&FlashDisk_MS_Interface, 0);
-
-		if (!(ErrorCode))
-		  break;
-
-		/* Check if an error other than a logical command error (device busy) received */
-		if (ErrorCode != MS_ERROR_LOGICAL_CMD_FAILED)
-		{
-			puts_P(PSTR("Error waiting for device to be ready.\r\n"));
-			LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-			USB_Host_SetDeviceConfiguration(0);
-			return;
-		}
-	}
-
-	puts_P(PSTR("Retrieving Capacity...\r\n"));
-
-	SCSI_Capacity_t DiskCapacity;
-	if (MS_Host_ReadDeviceCapacity(&FlashDisk_MS_Interface, 0, &DiskCapacity))
-	{
-		puts_P(PSTR("Error retrieving device capacity.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	printf_P(PSTR("%lu blocks of %lu bytes.\r\n"), DiskCapacity.Blocks, DiskCapacity.BlockSize);
-
-	uint8_t BlockBuffer[DiskCapacity.BlockSize];
-
-	if (MS_Host_ReadDeviceBlocks(&FlashDisk_MS_Interface, 0, 0x00000000, 1, DiskCapacity.BlockSize, BlockBuffer))
-	{
-		puts_P(PSTR("Error reading device block.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("\r\nContents of first block:\r\n"));
-
-	for (uint16_t Chunk = 0; Chunk < (DiskCapacity.BlockSize >> 4); Chunk++)
-	{
-		uint8_t* ChunkPtr = &BlockBuffer[Chunk << 4];
-
-		/* Print out the 16 bytes of the chunk in HEX format */
-		for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
-		{
-			char CurrByte = *(ChunkPtr + ByteOffset);
-			printf_P(PSTR("%.2X "), CurrByte);
-		}
-
-		printf_P(PSTR("    "));
-
-		/* Print out the 16 bytes of the chunk in ASCII format */
-		for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
-		{
-			char CurrByte = *(ChunkPtr + ByteOffset);
-			putchar(isprint(CurrByte) ? CurrByte : '.');
-		}
-
-		printf_P(PSTR("\r\n"));
-	}
-
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	USB_Host_SetDeviceConfiguration(0);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (MS_Host_ConfigurePipes(&FlashDisk_MS_Interface,
-	                           ConfigDescriptorSize, ConfigDescriptorData) != MS_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid Mass Storage Device.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	uint8_t MaxLUNIndex;
-	if (MS_Host_GetMaxLUN(&FlashDisk_MS_Interface, &MaxLUNIndex))
-	{
-		puts_P(PSTR("Error retrieving max LUN index.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	printf_P(PSTR("Total LUNs: %d - Using first LUN in device.\r\n"), (MaxLUNIndex + 1));
-
-	if (MS_Host_ResetMSInterface(&FlashDisk_MS_Interface))
-	{
-		puts_P(PSTR("Error resetting Mass Storage interface.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	SCSI_Request_Sense_Response_t SenseData;
-	if (MS_Host_RequestSense(&FlashDisk_MS_Interface, 0, &SenseData) != 0)
-	{
-		puts_P(PSTR("Error retrieving device sense.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	if (MS_Host_PreventAllowMediumRemoval(&FlashDisk_MS_Interface, 0, true))
-	{
-		puts_P(PSTR("Error setting Prevent Device Removal bit.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	SCSI_Inquiry_Response_t InquiryData;
-	if (MS_Host_GetInquiryData(&FlashDisk_MS_Interface, 0, &InquiryData))
-	{
-		puts_P(PSTR("Error retrieving device Inquiry data.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	printf_P(PSTR("Vendor \"%.8s\", Product \"%.16s\"\r\n"), InquiryData.VendorID, InquiryData.ProductID);
-
-	puts_P(PSTR("Mass Storage Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.h
deleted file mode 100644
index 316610e47f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MassStorage.c.
- */
-
-#ifndef _MASS_STORAGE_HOST_H_
-#define _MASS_STORAGE_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <ctype.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY          LEDS_LED2
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void MassStorageHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt
deleted file mode 100644
index 4b07261c4f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Mass Storage Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Mass Storage Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Bulk Only</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Mass Storage Standard \n
- *        USB Bulk-Only Transport Standard \n
- *        SCSI Primary Commands Specification \n
- *        SCSI Block Commands Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Mass Storage host demonstration application. This gives a simple reference
- *  application for implementing a USB Mass Storage host, for USB storage devices
- *  using the standard Mass Storage USB profile.
- *
- *  The first 512 bytes (boot sector) of an attached disk's memory will be dumped
- *  out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287
- *  AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents
- *  of the disk will be dumped to the serial port.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/asf.xml
deleted file mode 100644
index 54bfe50cc6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/asf.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Mass Storage Host Demo (Class Driver APIs)" id="lufa.demos.host.class.ms.example.avr8">

-		<require idref="lufa.demos.host.class.ms"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.class.ms" caption="Mass Storage Host Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Mass Storage Host demo, capable of reading and writing raw 512 byte segments to the device's serial port. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="Mass Storage Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MassStorageHost.txt"/>

-

-		<build type="c-source" value="MassStorageHost.c"/>

-		<build type="header-file" value="MassStorageHost.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/doxyfile
deleted file mode 100644
index 21c9814c91..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Mass Storage Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/makefile
deleted file mode 100644
index 759c8b57ba..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MassStorageHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MassStorageHost
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/MouseHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/MouseHost.c
deleted file mode 100644
index f42fe899ea..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/MouseHost.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MouseHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "MouseHost.h"
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Host_t Mouse_HID_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-				.HIDInterfaceProtocol   = HID_CSCP_MouseBootProtocol,
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Mouse Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		MouseHost_Task();
-
-		HID_Host_USBTask(&Mouse_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Task to manage an enumerated USB mouse once connected, to display movement
- *  data as it is received.
- */
-void MouseHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	if (HID_Host_IsReportReceived(&Mouse_HID_Interface))
-	{
-		uint8_t LEDMask = LEDS_NO_LEDS;
-
-		USB_MouseReport_Data_t MouseReport;
-		HID_Host_ReceiveReport(&Mouse_HID_Interface, &MouseReport);
-
-		printf_P(PSTR("dX:%2d dY:%2d Button:%d\r\n"), MouseReport.X,
-		                                              MouseReport.Y,
-		                                              MouseReport.Button);
-		if (MouseReport.X > 0)
-		  LEDMask |= LEDS_LED1;
-		else if (MouseReport.X < 0)
-		  LEDMask |= LEDS_LED2;
-
-		if (MouseReport.Y > 0)
-		  LEDMask |= LEDS_LED3;
-		else if (MouseReport.Y < 0)
-		  LEDMask |= LEDS_LED4;
-
-		if (MouseReport.Button)
-		  LEDMask  = LEDS_ALL_LEDS;
-
-		LEDs_SetAllLEDs(LEDMask);
-	}
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (HID_Host_ConfigurePipes(&Mouse_HID_Interface,
-	                            ConfigDescriptorSize, ConfigDescriptorData) != HID_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid Mouse.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (HID_Host_SetBootProtocol(&Mouse_HID_Interface) != 0)
-	{
-		puts_P(PSTR("Could not Set Boot Protocol Mode.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Mouse Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/MouseHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/MouseHost.h
deleted file mode 100644
index 0c3a8e611d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/MouseHost.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MouseHost.c.
- */
-
-#ifndef _MOUSE_HOST_H_
-#define _MOUSE_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void MouseHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/MouseHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/MouseHost.txt
deleted file mode 100644
index 29364537b2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/MouseHost.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Mouse Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Mouse host demonstration application. This gives a simple reference
- *  application for implementing a USB Mouse host, for USB mice using
- *  the standard mouse HID profile.
- *
- *  Mouse movement and button presses are displayed on the board LEDs,
- *  as well as printed out the serial terminal as formatted dY, dY and
- *  button status information.
- *
- *  This uses a naive method where the mouse is set to Boot Protocol mode, so
- *  that the report structure is fixed and known. A better implementation
- *  uses the HID report parser for correct report data processing across
- *  all compatible mice with advanced characteristics, as shown in the
- *  MouseHostWithParser demo application.
- *
- *  Currently only single interface mice are supported.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/asf.xml
deleted file mode 100644
index b28860771a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/asf.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Mouse HID Host Demo (Class Driver APIs)" id="lufa.demos.host.class.mouse.example.avr8">

-		<require idref="lufa.demos.host.class.mouse"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.class.mouse" caption="Mouse HID Host Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Mouse HID Host demo, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MouseHost.txt"/>

-

-		<build type="c-source" value="MouseHost.c"/>

-		<build type="header-file" value="MouseHost.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/doxyfile
deleted file mode 100644
index 41adfaf056..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Mouse Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/makefile
deleted file mode 100644
index aa5d69f2ca..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MouseHost
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c
deleted file mode 100644
index fdc4d615dd..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MouseHostWithParser demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "MouseHostWithParser.h"
-
-/** Processed HID report descriptor items structure, containing information on each HID report element */
-static HID_ReportInfo_t HIDReportInfo;
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Host_t Mouse_HID_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-				.HIDInterfaceProtocol   = HID_CSCP_NonBootProtocol,
-				.HIDParserData          = &HIDReportInfo
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Mouse Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		MouseHost_Task();
-
-		HID_Host_USBTask(&Mouse_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Task to manage an enumerated USB mouse once connected, to display movement
- *  data as it is received.
- */
-void MouseHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	if (HID_Host_IsReportReceived(&Mouse_HID_Interface))
-	{
-		uint8_t MouseReport[Mouse_HID_Interface.State.LargestReportSize];
-		HID_Host_ReceiveReport(&Mouse_HID_Interface, &MouseReport);
-
-		uint8_t LEDMask = LEDS_NO_LEDS;
-
-		for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++)
-		{
-			HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber];
-
-			/* Update the report item value if it is contained within the current report */
-			if (!(USB_GetHIDReportItemInfo(MouseReport, ReportItem)))
-			  continue;
-
-			/* Determine what report item is being tested, process updated value as needed */
-			if ((ReportItem->Attributes.Usage.Page        == USAGE_PAGE_BUTTON) &&
-			    (ReportItem->ItemType                     == HID_REPORT_ITEM_In))
-			{
-				if (ReportItem->Value)
-				  LEDMask = LEDS_ALL_LEDS;
-			}
-			else if ((ReportItem->Attributes.Usage.Page   == USAGE_PAGE_GENERIC_DCTRL) &&
-			         (ReportItem->Attributes.Usage.Usage  == USAGE_SCROLL_WHEEL)       &&
-			         (ReportItem->ItemType                == HID_REPORT_ITEM_In))
-			{
-				int16_t WheelDelta = HID_ALIGN_DATA(ReportItem, int16_t);
-
-				if (WheelDelta)
-				  LEDMask = (LEDS_LED1 | LEDS_LED2 | ((WheelDelta > 0) ? LEDS_LED3 : LEDS_LED4));
-			}
-			else if ((ReportItem->Attributes.Usage.Page   == USAGE_PAGE_GENERIC_DCTRL) &&
-			         ((ReportItem->Attributes.Usage.Usage == USAGE_X)                  ||
-			          (ReportItem->Attributes.Usage.Usage == USAGE_Y))                 &&
-			         (ReportItem->ItemType                == HID_REPORT_ITEM_In))
-			{
-				int16_t DeltaMovement = HID_ALIGN_DATA(ReportItem, int16_t);
-
-				if (DeltaMovement)
-				{
-					if (ReportItem->Attributes.Usage.Usage == USAGE_X)
-					  LEDMask |= ((DeltaMovement > 0) ? LEDS_LED1 : LEDS_LED2);
-					else
-					  LEDMask |= ((DeltaMovement > 0) ? LEDS_LED3 : LEDS_LED4);
-				}
-			}
-		}
-
-		LEDs_SetAllLEDs(LEDMask);
-	}
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (HID_Host_ConfigurePipes(&Mouse_HID_Interface,
-	                            ConfigDescriptorSize, ConfigDescriptorData) != HID_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid Mouse.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (HID_Host_SetReportProtocol(&Mouse_HID_Interface) != 0)
-	{
-		puts_P(PSTR("Error Setting Report Protocol Mode or Not a Valid Mouse.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Mouse Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Callback for the HID Report Parser. This function is called each time the HID report parser is about to store
- *  an IN, OUT or FEATURE item into the HIDReportInfo structure. To save on RAM, we are able to filter out items
- *  we aren't interested in (preventing us from being able to extract them later on, but saving on the RAM they would
- *  have occupied).
- *
- *  \param[in] CurrentItem  Pointer to the item the HID report parser is currently working with
- *
- *  \return Boolean \c true if the item should be stored into the HID report structure, \c false if it should be discarded
- */
-bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem)
-{
-	bool IsMouse = false;
-
-	/* Iterate through the item's collection path, until either the root collection node or a collection with the
-	 * Mouse Usage is found - this prevents Joysticks, which use identical descriptors except for the Joystick usage
-	 * parent node, from being erroneously treated as a mouse by the demo
-	 */
-	for (HID_CollectionPath_t* CurrPath = CurrentItem->CollectionPath; CurrPath != NULL; CurrPath = CurrPath->Parent)
-	{
-		if ((CurrPath->Usage.Page  == USAGE_PAGE_GENERIC_DCTRL) &&
-		    (CurrPath->Usage.Usage == USAGE_MOUSE))
-		{
-			IsMouse = true;
-			break;
-		}
-	}
-
-	/* If a collection with the mouse usage was not found, indicate that we are not interested in this item */
-	if (!IsMouse)
-	  return false;
-
-	/* Check the attributes of the current item - see if we are interested in it or not;
-	 * only store BUTTON and GENERIC_DESKTOP_CONTROL items into the Processed HID Report
-	 * structure to save RAM and ignore the rest
-	 */
-	return ((CurrentItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) ||
-	        (CurrentItem->Attributes.Usage.Page == USAGE_PAGE_GENERIC_DCTRL));
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h
deleted file mode 100644
index 064def450b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MouseHost.c.
- */
-
-#ifndef _MOUSE_HOST_H_
-#define _MOUSE_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY        LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING     (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY           (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR           (LEDS_LED1 | LEDS_LED3)
-
-		/** HID Report Descriptor Usage Page value for a toggle button. */
-		#define USAGE_PAGE_BUTTON           0x09
-
-		/** HID Report Descriptor Usage Page value for a Generic Desktop Control. */
-		#define USAGE_PAGE_GENERIC_DCTRL    0x01
-
-		/** HID Report Descriptor Usage for a Mouse. */
-		#define USAGE_MOUSE                 0x02
-
-		/** HID Report Descriptor Usage value for a X axis movement. */
-		#define USAGE_X                     0x30
-
-		/** HID Report Descriptor Usage value for a Y axis movement. */
-		#define USAGE_Y                     0x31
-
-		/** HID Report Descriptor Usage value for a Scroll Wheel movement. */
-		#define USAGE_SCROLL_WHEEL          0x38
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void MouseHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-		bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt
deleted file mode 100644
index 9b1b7d055c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Mouse Host With HID Descriptor Parser Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Mouse host demonstration application. This gives a simple reference
- *  application for implementing a USB Mouse host, for USB mice using
- *  the standard mouse HID profile. It uses a HID parser for the HID
- *  reports, allowing for correct operation across all USB mice. This
- *  demo supports mice with a single HID report.
- *
- *  Mouse and scroll wheel movement and button presses are displayed
- *  on the board LEDs. On connection to a USB mouse, the report items
- *  will be processed and printed as a formatted list through the USART
- *  before the mouse is fully enumerated.
- *
- *  Currently only single interface mice are supported.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/asf.xml
deleted file mode 100644
index 220eb457ca..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/asf.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Mouse HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.mouse_parser.example.avr8">

-		<require idref="lufa.demos.host.class.mouse_parser"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.class.mouse_parser" caption="Mouse HID (with parser) Host Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Mouse HID Host demo with HID parser, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MouseHostWithParser.txt"/>

-

-		<build type="c-source" value="MouseHostWithParser.c"/>

-		<build type="header-file" value="MouseHostWithParser.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/doxyfile
deleted file mode 100644
index 1336d998eb..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Mouse Host Demo (Using HID Descriptor Parser)"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/makefile
deleted file mode 100644
index a6c1628a76..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/MouseHostWithParser/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MouseHostWithParser
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c
deleted file mode 100644
index ddc9d6fe2b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the PrinterHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "PrinterHost.h"
-
-/** LUFA Printer Class driver interface configuration and state information. This structure is
- *  passed to all Printer Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_PRNT_Host_t Printer_PRNT_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Printer Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		PrinterHost_Task();
-
-		PRNT_Host_USBTask(&Printer_PRNT_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Task to manage an enumerated USB printer once connected, to display device
- *  information and print a test PCL page.
- */
-void PrinterHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-	puts_P(PSTR("Retrieving Device ID...\r\n"));
-
-	char DeviceIDString[300];
-	if (PRNT_Host_GetDeviceID(&Printer_PRNT_Interface, DeviceIDString,
-	                          sizeof(DeviceIDString)) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Getting Device ID.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	printf_P(PSTR("Device ID: %s.\r\n"), DeviceIDString);
-
-	char     TestPageData[] = "\033%-12345X\033E" "LUFA PCL Test Page" "\033E\033%-12345X";
-	uint16_t TestPageLength = strlen(TestPageData);
-
-	printf_P(PSTR("Sending Test Page (%d bytes)...\r\n"), TestPageLength);
-
-	if (PRNT_Host_SendData(&Printer_PRNT_Interface, &TestPageData, TestPageLength) != PIPE_RWSTREAM_NoError)
-	{
-		puts_P(PSTR("Error Sending Page Data.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Test Page Sent.\r\n"));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	USB_Host_SetDeviceConfiguration(0);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (PRNT_Host_ConfigurePipes(&Printer_PRNT_Interface,
-	                             ConfigDescriptorSize, ConfigDescriptorData) != PRNT_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid Printer Class Device.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (PRNT_Host_SetBidirectionalMode(&Printer_PRNT_Interface) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Bidirectional Mode.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Printer Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/PrinterHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/PrinterHost.h
deleted file mode 100644
index e330c22640..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/PrinterHost.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for PrinterHost.c.
- */
-
-#ifndef _PRINTER_HOST_H_
-#define _PRINTER_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY          LEDS_LED2
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void PrinterHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/PrinterHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/PrinterHost.txt
deleted file mode 100644
index e2a4820583..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/PrinterHost.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Printer Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Printer Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Bidirectional Protocol</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Printer Class Specification \n
- *        PCL Language Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Printer host demonstration application. This gives a simple reference
- *  application for implementing a USB Printer host, for USB printers using
- *  the bidirectional data encapsulation protocol and PCL language.
- *
- *  Upon connection of a compatible printer, the printer's device ID is sent
- *  to the AVR's serial port, and a simple test page is printed using the PCL
- *  printer language.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/asf.xml
deleted file mode 100644
index bd355cf35e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/asf.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Printer Host Demo (Class Driver APIs)" id="lufa.demos.host.class.printer.example.avr8">

-		<require idref="lufa.demos.host.class.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.class.printer" caption="Printer Host Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Printer Host demo, implementing a basic USB printer host that can send raw printer control data to an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="Printer Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="PrinterHost.txt"/>

-

-		<build type="c-source" value="PrinterHost.c"/>

-		<build type="header-file" value="PrinterHost.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/doxyfile
deleted file mode 100644
index f38d9823a9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Printer Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/makefile
deleted file mode 100644
index 9d1264eee9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/PrinterHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = PrinterHost
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c
deleted file mode 100644
index 782c351fe0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the RNDISEthernetHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "RNDISEthernetHost.h"
-
-/** Buffer to hold incoming and outgoing Ethernet packets. */
-static int8_t PacketBuffer[1024];
-
-/** LUFA RNDIS Class driver interface configuration and state information. This structure is
- *  passed to all RNDIS Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_RNDIS_Host_t Ethernet_RNDIS_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-				.NotificationPipe       =
-					{
-						.Address        = (PIPE_DIR_IN  | 3),
-						.Banks          = 1,
-					},
-				.HostMaxPacketSize      = sizeof(PacketBuffer),
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "RNDIS Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	sei();
-
-	for (;;)
-	{
-		RNDISHost_Task();
-
-		RNDIS_Host_USBTask(&Ethernet_RNDIS_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Task to manage an enumerated USB RNDIS device once connected, to display device
- *  received data packets.
- */
-void RNDISHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	if (RNDIS_Host_IsPacketReceived(&Ethernet_RNDIS_Interface))
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-		uint16_t PacketLength;
-		RNDIS_Host_ReadPacket(&Ethernet_RNDIS_Interface, &PacketBuffer, &PacketLength);
-
-		printf_P(PSTR("***PACKET (Size %d)***\r\n"), PacketLength);
-
-		for (uint16_t i = 0; i < PacketLength; i++)
-		  printf("0x%02x ", PacketBuffer[i]);
-
-		printf_P(PSTR("\r\n\r\n"));
-
-		LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (RNDIS_Host_ConfigurePipes(&Ethernet_RNDIS_Interface,
-	                              ConfigDescriptorSize, ConfigDescriptorData) != RNDIS_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid RNDIS Class Device.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (RNDIS_Host_InitializeDevice(&Ethernet_RNDIS_Interface) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Initializing Device.\r\n"));
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	printf_P(PSTR("Device Max Transfer Size: %lu bytes.\r\n"), Ethernet_RNDIS_Interface.State.DeviceMaxPacketSize);
-
-	uint32_t PacketFilter = (REMOTE_NDIS_PACKET_DIRECTED | REMOTE_NDIS_PACKET_BROADCAST | REMOTE_NDIS_PACKET_ALL_MULTICAST);
-	if (RNDIS_Host_SetRNDISProperty(&Ethernet_RNDIS_Interface, OID_GEN_CURRENT_PACKET_FILTER,
-	                                &PacketFilter, sizeof(PacketFilter)) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Packet Filter.\r\n"));
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	uint32_t VendorID;
-	if (RNDIS_Host_QueryRNDISProperty(&Ethernet_RNDIS_Interface, OID_GEN_VENDOR_ID,
-	                                  &VendorID, sizeof(VendorID)) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Getting Vendor ID.\r\n"));
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	printf_P(PSTR("Device Vendor ID: 0x%08lX\r\n"), VendorID);
-
-	puts_P(PSTR("RNDIS Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h
deleted file mode 100644
index d2f8240407..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for RNDISEthernetHost.c.
- */
-
-#ifndef _RNDIS_HOST_H_
-#define _RNDIS_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY          LEDS_LED2
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void RNDISHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.txt
deleted file mode 100644
index e9edd6d668..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage RNDIS Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>Microsoft RNDIS Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  RNDIS host demonstration application. This gives a simple reference
- *  application for implementing a RNDIS Ethernet host, for USB devices such as
- *  modems.
- *
- *  This demo will enumerate an attached USB RNDIS device, print out its vendor ID
- *  and any received packets in raw form through the serial USART.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/asf.xml
deleted file mode 100644
index 37cedaaa53..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/asf.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="RNDIS Ethernet Host Demo (Class Driver APIs)" id="lufa.demos.host.class.rndis.example.avr8">

-		<require idref="lufa.demos.host.class.rndis"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.class.rndis" caption="RNDIS Ethernet Host Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Microsoft RNDIS Ethernet Host demo, implementing a RNDIS host that can send and receive Ethernet data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="RNDIS Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="RNDISEthernetHost.txt"/>

-

-		<build type="c-source" value="RNDISEthernetHost.c"/>

-		<build type="header-file" value="RNDISEthernetHost.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/doxyfile
deleted file mode 100644
index 0d56dda37f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - RNDIS Ethernet Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
deleted file mode 100644
index 0a166d5be9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = RNDISEthernetHost
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c
deleted file mode 100644
index 6d70390cb4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the StillImageHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "StillImageHost.h"
-
-/** LUFA Still Image Class driver interface configuration and state information. This structure is
- *  passed to all Still Image Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_SI_Host_t DigitalCamera_SI_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-				.EventsPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 3),
-						.Banks          = 1,
-					},
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Still Image Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		StillImageHost_Task();
-
-		SI_Host_USBTask(&DigitalCamera_SI_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Task to manage an enumerated USB Still Image device once connected, to manage a
- *  new PIMA session in order to send commands to the attached device.
- */
-void StillImageHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	puts_P(PSTR("Opening Session...\r\n"));
-
-	if (SI_Host_OpenSession(&DigitalCamera_SI_Interface) != PIPE_RWSTREAM_NoError)
-	{
-		puts_P(PSTR("Could not open PIMA session.\r\n"));
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Turning off Device...\r\n"));
-
-	SI_Host_SendCommand(&DigitalCamera_SI_Interface, 0x1013, 0, NULL);
-	if (SI_Host_ReceiveResponse(&DigitalCamera_SI_Interface))
-	{
-		puts_P(PSTR("Could not turn off device.\r\n"));
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Device Off.\r\n"));
-
-	puts_P(PSTR("Closing Session...\r\n"));
-
-	if (SI_Host_CloseSession(&DigitalCamera_SI_Interface) != PIPE_RWSTREAM_NoError)
-	{
-		puts_P(PSTR("Could not close PIMA session.\r\n"));
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	USB_Host_SetDeviceConfiguration(0);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (SI_Host_ConfigurePipes(&DigitalCamera_SI_Interface,
-	                           ConfigDescriptorSize, ConfigDescriptorData) != SI_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid Still Image Class Device.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	puts_P(PSTR("Still Image Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/StillImageHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/StillImageHost.h
deleted file mode 100644
index a1d1afea04..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/StillImageHost.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for StillImageHost.c.
- */
-
-#ifndef _STILL_IMAGE_HOST_H_
-#define _STILL_IMAGE_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void StillImageHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt
deleted file mode 100644
index 193228a207..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Still Image Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Still Image Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Still Image Class Specification \n
- *        PIMA 15740 Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Still Image host demonstration application. This gives a simple reference
- *  application for implementing a Still Image host, for USB devices such as
- *  digital cameras.
- *
- *  This demo will enumerate an attached USB Still Image device, print out its
- *  information structure, open a session with the device and finally close the
- *  session.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/asf.xml
deleted file mode 100644
index 4a5f6bfeb1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/asf.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Still Image Host Demo (Class Driver APIs)" id="lufa.demos.host.class.si.example.avr8">

-		<require idref="lufa.demos.host.class.si"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.class.si" caption="Still Image Host Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Still Image Host demo, implementing a Still Image host that can send and receive PIMA data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="Still Image Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="StillImageHost.txt"/>

-

-		<build type="c-source" value="StillImageHost.c"/>

-		<build type="header-file" value="StillImageHost.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/doxyfile
deleted file mode 100644
index c050dc2cca..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Still Image Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/makefile
deleted file mode 100644
index bf3f6ddcc7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/StillImageHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = StillImageHost
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c
deleted file mode 100644
index aa80932105..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the VirtualSerialHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "VirtualSerialHost.h"
-
-/** LUFA CDC Class driver interface configuration and state information. This structure is
- *  passed to all CDC Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_CDC_Host_t VirtualSerial_CDC_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-				.NotificationPipe       =
-					{
-						.Address        = (PIPE_DIR_IN  | 3),
-						.Banks          = 1,
-					},
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "CDC Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		CDCHost_Task();
-
-		CDC_Host_USBTask(&VirtualSerial_CDC_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Task to manage an enumerated USB CDC device once connected, to print received data
- *  from the device to the serial port.
- */
-void CDCHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	if (CDC_Host_BytesReceived(&VirtualSerial_CDC_Interface))
-	{
-		/* Echo received bytes from the attached device through the USART */
-		int16_t ReceivedByte = CDC_Host_ReceiveByte(&VirtualSerial_CDC_Interface);
-		if (!(ReceivedByte < 0))
-		  putchar(ReceivedByte);
-	}
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (CDC_Host_ConfigurePipes(&VirtualSerial_CDC_Interface,
-	                            ConfigDescriptorSize, ConfigDescriptorData) != CDC_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid CDC Class Device.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	VirtualSerial_CDC_Interface.State.LineEncoding.BaudRateBPS = 9600;
-	VirtualSerial_CDC_Interface.State.LineEncoding.CharFormat  = CDC_LINEENCODING_OneStopBit;
-	VirtualSerial_CDC_Interface.State.LineEncoding.ParityType  = CDC_PARITY_None;
-	VirtualSerial_CDC_Interface.State.LineEncoding.DataBits    = 8;
-
-	if (CDC_Host_SetLineEncoding(&VirtualSerial_CDC_Interface))
-	{
-		puts_P(PSTR("Error Setting Device Line Encoding.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	puts_P(PSTR("CDC Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.h
deleted file mode 100644
index 289f53a7f9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for VirtualSerialHost.c.
- */
-
-#ifndef _VIRTUALSERIAL_HOST_H_
-#define _VIRTUALSERIAL_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void CDCHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.txt
deleted file mode 100644
index 1e1f9f1ae2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage CDC Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  CDC host demonstration application. This gives a simple reference application
- *  for implementing a USB CDC host, for CDC devices using the standard ACM profile.
- *
- *  This demo prints out received CDC data through the serial port.
- *
- *  Note that this demo is only compatible with devices which report the correct CDC
- *  and ACM class, subclass and protocol values. Most USB-Serial cables have vendor
- *  specific features, thus use vendor-specific class/subclass/protocol codes to force
- *  the user to use specialized drivers. This demo is not compatible with such devices.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/asf.xml
deleted file mode 100644
index e456c9295a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/asf.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Virtual Serial CDC Host Demo (Class Driver APIs)" id="lufa.demos.host.class.cdc.example.avr8">

-		<require idref="lufa.demos.host.class.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.class.cdc" caption="Virtual Serial CDC Host Demo (Class Driver APIs)">

-		<info type="description" value="summary">

-		Virtual Serial Host demo, implementing a CDC host that can send and receive data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="CDC Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="VirtualSerialHost.txt"/>

-

-		<build type="c-source" value="VirtualSerialHost.c"/>

-		<build type="header-file" value="VirtualSerialHost.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/doxyfile
deleted file mode 100644
index ac8ecfa62e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Virtual Serial Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/makefile
deleted file mode 100644
index 380205bcb9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/VirtualSerialHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = VirtualSerialHost
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/makefile
deleted file mode 100644
index 9e3919da44..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/ClassDriver/makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-
-# Makefile to build all the LUFA Host Demos. Call with "make all" to
-# rebuild all Host demos.
-
-# Projects are pre-cleaned before each one is built, to ensure any
-# custom LUFA library build options are reflected in the compiled
-# code.
-
-PROJECT_DIRECTORIES := $(shell ls -d */)
-
-# This makefile is potentially infinitely recursive if something really bad
-# happens when determining the set of project directories - hard-abort if
-# more than 10 levels deep to avoid angry emails.
-ifeq ($(MAKELEVEL), 10)
-   $(error EMERGENCY ABORT: INFINITE RECURSION DETECTED)
-endif
-
-# Need to special-case building without a per-project object directory
-ifeq ($(OBJDIR),)
-   # If no target specified, force "clean all" and disallow parallel build
-   ifeq ($(MAKECMDGOALS),)
-      MAKECMDGOALS := clean all
-      .NOTPARALLEL:
-   endif
-
-   # If one of the targets is to build, force "clean" beforehand and disallow parallel build
-   ifneq ($(findstring all, $(MAKECMDGOALS)),)
-      MAKECMDGOALS := clean $(MAKECMDGOALS)
-      .NOTPARALLEL:
-   endif
-endif
-
-%: $(PROJECT_DIRECTORIES)
-	@echo . > /dev/null
-
-$(PROJECT_DIRECTORIES):
-	@$(MAKE) -C $@ $(MAKECMDGOALS)
-
-.PHONY: $(PROJECT_DIRECTORIES)
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/AndroidAccessoryHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/AndroidAccessoryHost.c
deleted file mode 100644
index 9efbf37f34..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/AndroidAccessoryHost.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the AndroidAccessoryHost demo. This file contains the main tasks
- *  of the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "AndroidAccessoryHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Android Accessory Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		AndroidHost_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Task to set the configuration of the attached device after it has been enumerated. */
-void AndroidHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	/* Select the data IN pipe */
-	Pipe_SelectPipe(ANDROID_DATA_IN_PIPE);
-	Pipe_Unfreeze();
-
-	/* Check to see if a packet has been received */
-	if (Pipe_IsINReceived())
-	{
-		/* Re-freeze IN pipe after the packet has been received */
-		Pipe_Freeze();
-
-		/* Check if data is in the pipe */
-		if (Pipe_IsReadWriteAllowed())
-		{
-			uint8_t NextReceivedByte = Pipe_Read_8();
-			uint8_t LEDMask          = LEDS_NO_LEDS;
-
-			if (NextReceivedByte & 0x01)
-			  LEDMask |= LEDS_LED1;
-
-			if (NextReceivedByte & 0x02)
-			  LEDMask |= LEDS_LED2;
-
-			if (NextReceivedByte & 0x04)
-			  LEDMask |= LEDS_LED3;
-
-			if (NextReceivedByte & 0x08)
-			  LEDMask |= LEDS_LED4;
-
-			LEDs_SetAllLEDs(LEDMask);
-		}
-		else
-		{
-			/* Clear the pipe after all data in the packet has been read, ready for the next packet */
-			Pipe_ClearIN();
-		}
-	}
-
-	/* Re-freeze IN pipe after use */
-	Pipe_Freeze();
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Device Data.\r\n"));
-
-	/* Get and process the configuration descriptor data */
-	uint8_t ErrorCode = ProcessDeviceDescriptor();
-
-	bool RequiresModeSwitch = (ErrorCode == NonAccessoryModeAndroidDevice);
-
-	/* Error out if the device is not an Android device or an error occurred */
-	if ((ErrorCode != AccessoryModeAndroidDevice) && (ErrorCode != NonAccessoryModeAndroidDevice))
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	printf_P(PSTR("Android Device Detected - %sAccessory mode.\r\n"), (RequiresModeSwitch ? "Non-" : ""));
-
-	/* Check if a valid Android device was attached, but it is not current in Accessory mode */
-	if (RequiresModeSwitch)
-	{
-		uint16_t AndroidProtocol;
-
-		/* Fetch the version of the Android Accessory Protocol supported by the device */
-		if ((ErrorCode = Android_GetAccessoryProtocol(&AndroidProtocol)) != HOST_SENDCONTROL_Successful)
-		{
-			printf_P(PSTR(ESC_FG_RED "Control Error (Get Protocol).\r\n"
-			                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-			LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-			return;
-		}
-
-		/* Validate the returned protocol version */
-		if (AndroidProtocol != AOA_PROTOCOL_AccessoryV1)
-		{
-			puts_P(PSTR(ESC_FG_RED "Accessory Mode Not Supported."));
-
-			LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-			return;
-		}
-
-		/* Send the device strings and start the Android Accessory Mode */
-		Android_SendString(AOA_STRING_Manufacturer, "Dean Camera");
-		Android_SendString(AOA_STRING_Model,        "LUFA Android Demo");
-		Android_SendString(AOA_STRING_Description,  "LUFA Android Demo");
-		Android_SendString(AOA_STRING_Version,      "1.0");
-		Android_SendString(AOA_STRING_URI,          "http://www.lufa-lib.org");
-		Android_SendString(AOA_STRING_Serial,       "0000000012345678");
-
-		Android_StartAccessoryMode();
-		return;
-	}
-
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	puts_P(PSTR("Accessory Mode Android Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/AndroidAccessoryHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/AndroidAccessoryHost.h
deleted file mode 100644
index b08b245fcc..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/AndroidAccessoryHost.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for AndroidAccessoryHost.c.
- */
-
-#ifndef _ANDROID_ACCESSORY_HOST_H_
-#define _ANDROID_ACCESSORY_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include "DeviceDescriptor.h"
-		#include "ConfigDescriptor.h"
-		#include "Lib/AndroidAccessoryCommands.h"
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY          LEDS_LED2
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void AndroidHost_Task(void);
-
-	/* Event Handlers: */
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/AndroidAccessoryHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/AndroidAccessoryHost.txt
deleted file mode 100644
index 70e0935c9f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/AndroidAccessoryHost.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Android Accessory Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Android Accessory Host Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>Android Accessory Host Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Android Accessory Host demonstration application. This gives a simple reference
- *  application for implementing an Android Accessory Host device capable of hosting
- *  Android powered mobile devices to send and receive data.
- *
- *  Sent data from the Android device will be indicated onto the board's LEDs.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/Config/LUFAConfig.h
deleted file mode 100644
index 884b503985..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-		#define HOST_DEVICE_SETTLE_DELAY_MS	     0
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c
deleted file mode 100644
index 89302b680e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for the first interface containing bulk IN and OUT data endpoints.
- *
- *  \return An error code from the \ref AndroidHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Endpoint_t* DataINEndpoint  = NULL;
-	USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return DevControlError;
-	}
-
-	/* There should be only one compatible Android Accessory Mode interface in the device, attempt to find it */
-	if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-	                              DCOMP_NextAndroidAccessoryInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-	{
-		return NoCompatibleInterfaceFound;
-	}
-
-	while (!(DataINEndpoint) || !(DataOUTEndpoint))
-	{
-		/* Get the next Android Accessory Mode interface's data endpoint descriptor */
-		if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DCOMP_NextInterfaceBulkEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Data endpoints not found within the first Android Accessory device interface, error out */
-			return NoCompatibleInterfaceFound;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* If the endpoint is a IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		  DataINEndpoint  = EndpointData;
-		else
-		  DataOUTEndpoint = EndpointData;
-	}
-
-	/* Configure the Android Accessory data IN pipe */
-	Pipe_ConfigurePipe(ANDROID_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-
-	/* Configure the Android Accessory data OUT pipe */
-	Pipe_ConfigurePipe(ANDROID_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor containing the correct Android Accessory Mode Class, Subclass
- *  and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DCOMP_NextAndroidAccessoryInterface(void* const CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		if ((Interface->Class    == AOA_CSCP_AOADataClass)    &&
-		    (Interface->SubClass == AOA_CSCP_AOADataSubclass) &&
-		    (Interface->Protocol == AOA_CSCP_AOADataProtocol))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next bulk Endpoint descriptor inside the current interface descriptor, aborting the
- *  search if another interface descriptor is found before the required endpoint.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DCOMP_NextInterfaceBulkEndpoint(void* const CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Endpoint)
-	{
-		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
-		uint8_t EndpointType = (Endpoint->Attributes & EP_TYPE_MASK);
-
-		if ((EndpointType == EP_TYPE_BULK) && (!(Pipe_IsEndpointBound(Endpoint->EndpointAddress))))
-		  return DESCRIPTOR_SEARCH_Found;
-	}
-	else if (Header->Type == DTYPE_Interface)
-	{
-		return DESCRIPTOR_SEARCH_Fail;
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h
deleted file mode 100644
index 5b43d70497..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Macros: */
-		/** Pipe address of the Android Accessory data IN pipe. */
-		#define ANDROID_DATA_IN_PIPE         (PIPE_DIR_IN  | 1)
-
-		/** Pipe address of the Android Accessory data OUT pipe. */
-		#define ANDROID_DATA_OUT_PIPE        (PIPE_DIR_OUT | 2)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum AndroidHost_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			DevControlError                 = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DCOMP_NextAndroidAccessoryInterface(void* const CurrentDescriptor);
-		uint8_t DCOMP_NextInterfaceBulkEndpoint(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/DeviceDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/DeviceDescriptor.c
deleted file mode 100644
index 2e3540857c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/DeviceDescriptor.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptor processing routines, to determine the overall device parameters. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine information about
- *  the attached device.
- */
-
-#include "DeviceDescriptor.h"
-
-/** Reads and processes an attached device's Device Descriptor, to determine compatibility
- *
- *  This routine checks to ensure that the attached device's VID and PID matches Google's for Android devices.
- *
- *  \return An error code from the \ref AndroidHost_GetDeviceDescriptorDataCodes_t enum.
- */
-uint8_t ProcessDeviceDescriptor(void)
-{
-	USB_Descriptor_Device_t DeviceDescriptor;
-
-	/* Send the request to retrieve the device descriptor */
-	if (USB_Host_GetDeviceDescriptor(&DeviceDescriptor) != HOST_SENDCONTROL_Successful)
-	  return DevControlError;
-
-	/* Validate returned data - ensure the returned data is a device descriptor */
-	if (DeviceDescriptor.Header.Type != DTYPE_Device)
-	  return InvalidDeviceDataReturned;
-
-	/* Check the product ID to determine if the Android device is in accessory mode */
-	if ((DeviceDescriptor.ProductID != ANDROID_ACCESSORY_PRODUCT_ID) &&
-	    (DeviceDescriptor.ProductID != ANDROID_ACCESSORY_ADB_PRODUCT_ID))
-	{
-		return NonAccessoryModeAndroidDevice;
-	}
-
-	return AccessoryModeAndroidDevice;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/DeviceDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/DeviceDescriptor.h
deleted file mode 100644
index 4a75fcc1ae..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/DeviceDescriptor.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DeviceDescriptor.c.
- */
-
-#ifndef _DEVICEDESCRIPTOR_H_
-#define _DEVICEDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "AndroidAccessoryHost.h"
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessDeviceDescriptor() function. */
-		enum AndroidHost_GetDeviceDescriptorDataCodes_t
-		{
-			SuccessfulDeviceRead            = 0, /**< Device Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			InvalidDeviceDataReturned       = 2, /**< The device returned an invalid Device Descriptor */
-			IncorrectAndroidDevice          = 3, /**< The attached device is not an Android device */
-			NonAccessoryModeAndroidDevice   = 4, /**< The attached device is an Android device in non-accessory mode */
-			AccessoryModeAndroidDevice      = 5, /**< The attached device is an Android device in accessory mode */
-		};
-
-	/* Function Prototypes: */
-		uint8_t ProcessDeviceDescriptor(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/Lib/AndroidAccessoryCommands.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/Lib/AndroidAccessoryCommands.c
deleted file mode 100644
index 750f9958f6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/Lib/AndroidAccessoryCommands.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Android Accessory Mode utility functions, for the configuration of an attached
- *  Android device into Android Accessory Mode ready for general communication.
- */
-
-#include "AndroidAccessoryCommands.h"
-
-uint8_t Android_GetAccessoryProtocol(uint16_t* const Protocol)
-{
-	USB_ControlRequest = (USB_Request_Header_t)
-	{
-		.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_VENDOR | REQREC_DEVICE),
-		.bRequest      = AOA_REQ_GetAccessoryProtocol,
-		.wValue        = 0,
-		.wIndex        = 0,
-		.wLength       = sizeof(uint16_t),
-	};
-
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-	return USB_Host_SendControlRequest(Protocol);
-}
-
-uint8_t Android_SendString(const uint8_t StringIndex,
-                           const char* const String)
-{
-	USB_ControlRequest = (USB_Request_Header_t)
-	{
-		.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_VENDOR | REQREC_DEVICE),
-		.bRequest      = AOA_REQ_SendString,
-		.wValue        = 0,
-		.wIndex        = StringIndex,
-		.wLength       = (strlen(String) + 1),
-	};
-
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-	return USB_Host_SendControlRequest((char*)String);
-}
-
-uint8_t Android_StartAccessoryMode(void)
-{
-	USB_ControlRequest = (USB_Request_Header_t)
-	{
-		.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_VENDOR | REQREC_DEVICE),
-		.bRequest      = AOA_REQ_StartAccessoryMode,
-		.wValue        = 0,
-		.wIndex        = 0,
-		.wLength       = 0,
-	};
-
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-	return USB_Host_SendControlRequest(NULL);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/Lib/AndroidAccessoryCommands.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/Lib/AndroidAccessoryCommands.h
deleted file mode 100644
index 93b1b96587..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/Lib/AndroidAccessoryCommands.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for AndroidAccessoryCommands.c.
- */
-
-#ifndef _ANDROID_ACCESSORY_COMMANDS_H_
-#define _ANDROID_ACCESSORY_COMMANDS_H_
-
-	/* Includes: */
-		#include <stdint.h>
-		#include <stdbool.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Function Prototypes: */
-		uint8_t Android_GetAccessoryProtocol(uint16_t* const Protocol);
-		uint8_t Android_SendString(const uint8_t StringIndex,
-		                           const char* const String);
-		uint8_t Android_StartAccessoryMode(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/asf.xml
deleted file mode 100644
index 25b47661b5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/asf.xml
+++ /dev/null
@@ -1,55 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Android Accessory Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.android.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.android"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.android" caption="Android Accessory Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Android Accessory Host demo, implementing a basic USB device whose LEDs can be controlled via an Android device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="Android Accessory Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="AndroidAccessoryHost.txt"/>

-

-		<build type="c-source" value="AndroidAccessoryHost.c"/>

-		<build type="c-source" value="DeviceDescriptor.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="header-file" value="AndroidAccessoryHost.h"/>

-		<build type="header-file" value="DeviceDescriptor.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-

-		<build type="c-source" value="Lib/AndroidAccessoryCommands.c"/>

-		<build type="header-file" value="Lib/AndroidAccessoryCommands.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/doxyfile
deleted file mode 100644
index a17aa3bb06..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Android Accessory Mode Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/makefile
deleted file mode 100644
index 57ccedd1b7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AndroidAccessoryHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = AndroidAccessoryHost
-SRC          = $(TARGET).c ConfigDescriptor.c DeviceDescriptor.c Lib/AndroidAccessoryCommands.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.c
deleted file mode 100644
index a17648c371..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the AudioInputHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "AudioInputHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Audio Input Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	uint8_t ErrorCode;
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if ((ErrorCode = USB_Host_SetInterfaceAltSetting(StreamingInterfaceIndex,
-	                                                 StreamingInterfaceAltSetting)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Could not set alternative streaming interface setting.\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT),
-			.bRequest      = AUDIO_REQ_SetCurrent,
-			.wValue        = (AUDIO_EPCONTROL_SamplingFreq << 8),
-			.wIndex        = StreamingEndpointAddress,
-			.wLength       = sizeof(USB_Audio_SampleFreq_t),
-		};
-
-	USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);
-
-	/* Select the control pipe for the request transfer */
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	/* Set the sample rate on the streaming interface endpoint */
-	if ((ErrorCode = USB_Host_SendControlRequest(&SampleRate)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Could not set requested Audio sample rate.\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Sample reload timer initialization */
-	TIMSK0  = (1 << OCIE0A);
-	OCR0A   = ((F_CPU / 8 / 48000) - 1);
-	TCCR0A  = (1 << WGM01);  // CTC mode
-	TCCR0B  = (1 << CS01);   // Fcpu/8 speed
-
-	/* Set speaker as output */
-	DDRC   |= (1 << 6);
-
-	/* PWM speaker timer initialization */
-	TCCR3A  = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0)); // Set on match, clear on TOP
-	TCCR3B  = ((1 << WGM32) | (1 << CS30));  // Fast 8-Bit PWM, F_CPU speed
-
-	puts_P(PSTR("Microphone Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** ISR to handle the reloading of the PWM timer with the next sample. */
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)
-{
-	uint8_t PrevPipe = Pipe_GetCurrentPipe();
-
-	Pipe_SelectPipe(AUDIO_DATA_IN_PIPE);
-	Pipe_Unfreeze();
-
-	/* Check if the current pipe can be read from (contains a packet) and the device is sending data */
-	if (Pipe_IsINReceived())
-	{
-		/* Retrieve the signed 16-bit audio sample, convert to 8-bit */
-		int8_t Sample_8Bit = (Pipe_Read_16_LE() >> 8);
-
-		/* Check to see if the bank is now empty */
-		if (!(Pipe_IsReadWriteAllowed()))
-		{
-			/* Acknowledge the packet, clear the bank ready for the next packet */
-			Pipe_ClearIN();
-		}
-
-		/* Load the sample into the PWM timer channel */
-		OCR3A = (Sample_8Bit ^ (1 << 7));
-
-		uint8_t LEDMask = LEDS_NO_LEDS;
-
-		/* Turn on LEDs as the sample amplitude increases */
-		if (Sample_8Bit > 16)
-		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4);
-		else if (Sample_8Bit > 8)
-		  LEDMask = (LEDS_LED1 | LEDS_LED2 | LEDS_LED3);
-		else if (Sample_8Bit > 4)
-		  LEDMask = (LEDS_LED1 | LEDS_LED2);
-		else if (Sample_8Bit > 2)
-		  LEDMask = (LEDS_LED1);
-
-		LEDs_SetAllLEDs(LEDMask);
-	}
-
-	Pipe_Freeze();
-	Pipe_SelectPipe(PrevPipe);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.h
deleted file mode 100644
index 9f68c866b8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for AudioInputHost.c.
- */
-
-#ifndef _AUDIO_INPUT_HOST_H_
-#define _AUDIO_INPUT_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "ConfigDescriptor.h"
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.txt
deleted file mode 100644
index 0736e0df47..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Audio Input Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Standard Audio Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Audio 1.0 Class Specification \n
- *        USBIF Audio 1.0 Class Terminal Types Specification \n
- *        USBIF Audio 1.0 Data Formats Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Audio Input host demonstration application. This gives a simple reference
- *  application for implementing a USB Audio host, for USB Audio devices using
- *  the USB Audio 1.0 class profile.
- *
- *  Incoming audio will output in 8-bit PWM onto the timer 3 output compare
- *  channel A, and will also be indicated on the board LEDs. Decouple the PWM
- *  output with a capacitor and attach to a speaker to hear the audio.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c
deleted file mode 100644
index 8dd7246672..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Index of the currently used Audio Streaming Interface within the device. */
-uint8_t StreamingInterfaceIndex      = 0;
-
-/** Alternative Setting of the currently used Audio Streaming Interface within the device. */
-uint8_t StreamingInterfaceAltSetting = 0;
-
-/** Address of the streaming audio endpoint currently in use within the device. */
-uint8_t StreamingEndpointAddress     = 0;
-
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a Streaming Audio interface descriptor containing a valid Isochronous audio endpoint.
- *
- *  \return An error code from the \ref AudioHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* AudioControlInterface   = NULL;
-	USB_Descriptor_Interface_t* AudioStreamingInterface = NULL;
-	USB_Descriptor_Endpoint_t*  DataINEndpoint          = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataINEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(AudioControlInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextAudioInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Check if we haven't found an Audio Control interface yet, or if we have run out of related Audio Streaming interfaces */
-			if (!(AudioControlInterface) ||
-			    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-			                              DComp_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Find a new Audio Control interface if the current one doesn't contain a compatible streaming interface */
-				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-				                              DComp_NextAudioControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-				{
-					/* Descriptor not found, error out */
-					return NoCompatibleInterfaceFound;
-				}
-
-				/* Save the interface in case we need to refer back to it later */
-				AudioControlInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-				/* Find the next Audio Streaming interface within that Audio Control interface */
-				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-				                              DComp_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-				{
-					/* Descriptor not found, error out */
-					return NoCompatibleInterfaceFound;
-				}
-			}
-
-			/* Save the interface in case we need to refer back to it later */
-			AudioStreamingInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* Save the endpoint if it is an IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		  DataINEndpoint = EndpointData;
-	}
-
-	StreamingInterfaceIndex      = AudioStreamingInterface->InterfaceNumber;
-	StreamingInterfaceAltSetting = AudioStreamingInterface->AlternateSetting;
-	StreamingEndpointAddress     = DataINEndpoint->EndpointAddress;
-
-	/* Configure the Audio data IN pipe */
-	Pipe_ConfigurePipe(AUDIO_DATA_IN_PIPE, EP_TYPE_ISOCHRONOUS, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 2);
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct Audio Control Class, Subclass and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextAudioControlInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		if ((Interface->Class    == AUDIO_CSCP_AudioClass) &&
-		    (Interface->SubClass == AUDIO_CSCP_ControlSubclass) &&
-		    (Interface->Protocol == AUDIO_CSCP_ControlProtocol))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct Audio Streaming Class, Subclass and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextAudioStreamInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		if ((Interface->Class    == AUDIO_CSCP_AudioClass) &&
-		    (Interface->SubClass == AUDIO_CSCP_AudioStreamingSubclass) &&
-		    (Interface->Protocol == AUDIO_CSCP_StreamingProtocol))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Isochronous Endpoint descriptor within the current interface, aborting the
- *  search if another interface descriptor is found before the next endpoint.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Endpoint)
-	{
-		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
-		if ((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_ISOCHRONOUS)
-		  return DESCRIPTOR_SEARCH_Found;
-	}
-	else if (Header->Type == DTYPE_Interface)
-	{
-		return DESCRIPTOR_SEARCH_Fail;
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h
deleted file mode 100644
index 1fd4db8a23..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "AudioInputHost.h"
-
-	/* Macros: */
-		/** Pipe address for the Audio data IN pipe. */
-		#define AUDIO_DATA_IN_PIPE          (PIPE_DIR_IN | 1)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum AudioHost_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* External Variables: */
-		extern uint8_t StreamingInterfaceIndex;
-		extern uint8_t StreamingInterfaceAltSetting;
-		extern uint8_t StreamingEndpointAddress;
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextAudioControlInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextAudioStreamInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/asf.xml
deleted file mode 100644
index f6defd91d7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/asf.xml
+++ /dev/null
@@ -1,50 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Audio Input Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_input.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.audio_input"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.audio_input" caption="Audio Input Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Audio Input Host demo, implementing a basic USB audio sink that can output incoming audio data to a speaker. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="Audio Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="AudioInputHost.txt"/>

-

-		<build type="c-source" value="AudioInputHost.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="header-file" value="AudioInputHost.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/doxyfile
deleted file mode 100644
index 2440541f8c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Audio Input Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/makefile
deleted file mode 100644
index df1bd0bc8b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioInputHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = AudioInputHost
-SRC          = $(TARGET).c ConfigDescriptor.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.c
deleted file mode 100644
index 819c83eeb7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the AudioOutputHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "AudioOutputHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Audio Output Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	Buttons_Init();
-	ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
-	ADC_SetupChannel(MIC_IN_ADC_CHANNEL);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-
-	/* Start the ADC conversion in free running mode */
-	ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	uint8_t ErrorCode;
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if ((ErrorCode = USB_Host_SetInterfaceAltSetting(StreamingInterfaceIndex,
-	                                                 StreamingInterfaceAltSetting)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Could not set alternative streaming interface setting.\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT),
-			.bRequest      = AUDIO_REQ_SetCurrent,
-			.wValue        = (AUDIO_EPCONTROL_SamplingFreq << 8),
-			.wIndex        = StreamingEndpointAddress,
-			.wLength       = sizeof(USB_Audio_SampleFreq_t),
-		};
-
-	USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);
-
-	/* Select the control pipe for the request transfer */
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	/* Set the sample rate on the streaming interface endpoint */
-	if ((ErrorCode = USB_Host_SendControlRequest(&SampleRate)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Could not set requested Audio sample rate.\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Sample reload timer initialization */
-	TIMSK0  = (1 << OCIE0A);
-	OCR0A   = ((F_CPU / 8 / 48000) - 1);
-	TCCR0A  = (1 << WGM01);  // CTC mode
-	TCCR0B  = (1 << CS01);   // Fcpu/8 speed
-
-	puts_P(PSTR("Speaker Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** ISR to handle the reloading of the endpoint with the next sample. */
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)
-{
-	uint8_t PrevPipe = Pipe_GetCurrentPipe();
-
-	Pipe_SelectPipe(AUDIO_DATA_OUT_PIPE);
-	Pipe_Unfreeze();
-
-	/* Check if the current pipe can be written to (device ready for more data) */
-	if (Pipe_IsOUTReady())
-	{
-		int16_t AudioSample;
-
-		#if defined(USE_TEST_TONE)
-			static uint8_t SquareWaveSampleCount;
-			static int16_t CurrentWaveValue;
-
-			/* In test tone mode, generate a square wave at 1/256 of the sample rate */
-			if (SquareWaveSampleCount++ == 0xFF)
-			  CurrentWaveValue ^= 0x8000;
-
-			/* Only generate audio if the board button is being pressed */
-			AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;
-		#else
-			/* Audio sample is ADC value scaled to fit the entire range */
-			AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult());
-
-			#if defined(MICROPHONE_BIASED_TO_HALF_RAIL)
-			/* Microphone is biased to half rail voltage, subtract the bias from the sample value */
-			AudioSample -= (SAMPLE_MAX_RANGE / 2);
-			#endif
-		#endif
-
-		Pipe_Write_16_LE(AudioSample);
-		Pipe_Write_16_LE(AudioSample);
-
-		if (!(Pipe_IsReadWriteAllowed()))
-		  Pipe_ClearOUT();
-	}
-
-	Pipe_Freeze();
-	Pipe_SelectPipe(PrevPipe);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h
deleted file mode 100644
index 6b7ccce91f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for AudioOutputHost.c.
- */
-
-#ifndef _AUDIO_OUTPUT_HOST_H_
-#define _AUDIO_OUTPUT_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Peripheral/ADC.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "ConfigDescriptor.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Maximum audio sample value for the microphone input. */
-		#define SAMPLE_MAX_RANGE          0xFFFF
-
-		/** Maximum ADC range for the microphone input. */
-		#define ADC_MAX_RANGE             0x3FF
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt
deleted file mode 100644
index 5e79a33e38..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Audio Output Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Standard Audio Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Audio 1.0 Class Specification \n
- *        USBIF Audio 1.0 Class Terminal Types Specification \n
- *        USBIF Audio 1.0 Data Formats Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Audio Output host demonstration application. This gives a simple reference
- *  application for implementing a USB Audio host, for USB Audio devices using
- *  the USB Audio 1.0 class profile.
- *
- *  By default, the demo will produce a square wave test tone when the board
- *  button is pressed. If USE_TEST_TONE is not defined in the project makefile,
- *  incoming audio from the ADC channel 1 will be sampled and sent to the attached
- *  USB audio device instead.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>MIC_IN_ADC_CHANNEL</td>
- *    <td>AppConfig.h</td>
- *    <td>Sets the ADC channel used by the demo for the input audio samples from an attached microphone.</td>
- *   </tr>
- *   <tr>
- *    <td>USE_TEST_TONE</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
- *        instead of sampling the board microphone.</td>
- *   </tr>
- *   <tr>
- *    <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/Config/AppConfig.h
deleted file mode 100644
index 8360102f64..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/Config/AppConfig.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define MIC_IN_ADC_CHANNEL               2
-
-	#define MICROPHONE_BIASED_TO_HALF_RAIL
-	#define USE_TEST_TONE
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c
deleted file mode 100644
index b1e675ab4d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Index of the currently used Audio Streaming Interface within the device. */
-uint8_t StreamingInterfaceIndex      = 0;
-
-/** Alternative Setting of the currently used Audio Streaming Interface within the device. */
-uint8_t StreamingInterfaceAltSetting = 0;
-
-/** Address of the streaming audio endpoint currently in use within the device. */
-uint8_t StreamingEndpointAddress     = 0;
-
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a Streaming Audio interface descriptor containing a valid Isochronous audio endpoint.
- *
- *  \return An error code from the \ref AudioHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* AudioControlInterface   = NULL;
-	USB_Descriptor_Interface_t* AudioStreamingInterface = NULL;
-	USB_Descriptor_Endpoint_t*  DataOUTEndpoint         = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataOUTEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(AudioControlInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextAudioInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Check if we haven't found an Audio Control interface yet, or if we have run out of related Audio Streaming interfaces */
-			if (!(AudioControlInterface) ||
-			    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-				                          DComp_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Find a new Audio Control interface if the current one doesn't contain a compatible streaming interface */
-				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-				                              DComp_NextAudioControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-				{
-					/* Descriptor not found, error out */
-					return NoCompatibleInterfaceFound;
-				}
-
-				/* Save the interface in case we need to refer back to it later */
-				AudioControlInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-				/* Find the next Audio Streaming interface within that Audio Control interface */
-				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-				                              DComp_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-				{
-					/* Descriptor not found, error out */
-					return NoCompatibleInterfaceFound;
-				}
-			}
-
-			/* Save the interface in case we need to refer back to it later */
-			AudioStreamingInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* Save the endpoint if it is an OUT type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_OUT)
-		  DataOUTEndpoint = EndpointData;
-	}
-
-	StreamingInterfaceIndex      = AudioStreamingInterface->InterfaceNumber;
-	StreamingInterfaceAltSetting = AudioStreamingInterface->AlternateSetting;
-	StreamingEndpointAddress     = DataOUTEndpoint->EndpointAddress;
-
-	/* Configure the Audio data OUT pipe */
-	Pipe_ConfigurePipe(AUDIO_DATA_OUT_PIPE, EP_TYPE_ISOCHRONOUS, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 2);
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct Audio Control Class, Subclass and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextAudioControlInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		if ((Interface->Class    == AUDIO_CSCP_AudioClass) &&
-		    (Interface->SubClass == AUDIO_CSCP_ControlSubclass) &&
-		    (Interface->Protocol == AUDIO_CSCP_ControlProtocol))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct Audio Streaming Class, Subclass and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextAudioStreamInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		if ((Interface->Class    == AUDIO_CSCP_AudioClass) &&
-		    (Interface->SubClass == AUDIO_CSCP_AudioStreamingSubclass) &&
-		    (Interface->Protocol == AUDIO_CSCP_StreamingProtocol))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Isochronous Endpoint descriptor within the current interface, aborting the
- *  search if another interface descriptor is found before the next endpoint.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Endpoint)
-	{
-		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
-		if ((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_ISOCHRONOUS)
-		  return DESCRIPTOR_SEARCH_Found;
-	}
-	else if (Header->Type == DTYPE_Interface)
-	{
-		return DESCRIPTOR_SEARCH_Fail;
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h
deleted file mode 100644
index 4b9ace16f6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "AudioOutputHost.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Pipe address for the Audio data OUT pipe. */
-		#define AUDIO_DATA_OUT_PIPE          (PIPE_DIR_OUT | 1)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum AudioHost_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* External Variables: */
-		extern uint8_t StreamingInterfaceIndex;
-		extern uint8_t StreamingInterfaceAltSetting;
-		extern uint8_t StreamingEndpointAddress;
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextAudioControlInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextAudioStreamInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/asf.xml
deleted file mode 100644
index ebc1587c69..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/asf.xml
+++ /dev/null
@@ -1,54 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Audio Output Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_output.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.audio_output"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.audio_output" caption="Audio Output Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Audio Output Host demo, implementing a basic USB audio source that can output audio data to an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="Audio Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="AudioOutputHost.txt"/>

-

-		<build type="c-source" value="AudioOutputHost.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="header-file" value="AudioOutputHost.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.peripheral.adc"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/doxyfile
deleted file mode 100644
index 29cf0ddacc..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Audio Output Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/makefile
deleted file mode 100644
index fc3058af1b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/AudioOutputHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = AudioOutputHost
-SRC          = $(TARGET).c ConfigDescriptor.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c
deleted file mode 100644
index 8efa20f12b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a HID interface descriptor containing at least one Interrupt type IN endpoint.
- *
- *  \return An error code from the \ref GenericHIDHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* HIDInterface    = NULL;
-	USB_Descriptor_Endpoint_t*  DataINEndpoint  = NULL;
-	USB_Descriptor_Endpoint_t*  DataOUTEndpoint = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataINEndpoint) || !(DataOUTEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(HIDInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextHIDInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Not all HID devices have an OUT endpoint - if we've reached the end of the HID descriptor
-			 * but only found the mandatory IN endpoint, it's safe to continue with the device enumeration */
-			if (DataINEndpoint)
-			  break;
-
-			/* Get the next HID interface from the configuration descriptor */
-			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-										  DComp_NextHIDInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Descriptor not found, error out */
-				return NoCompatibleInterfaceFound;
-			}
-
-			/* Save the interface in case we need to refer back to it later */
-			HIDInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-			/* Clear any found endpoints */
-			DataOUTEndpoint = NULL;
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* If the endpoint is a IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		  DataINEndpoint = EndpointData;
-		else
-		  DataOUTEndpoint = EndpointData;
-	}
-
-	/* Configure the HID data IN pipe */
-	Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-	Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS);
-
-	/* Check if the HID interface contained an optional OUT data endpoint */
-	if (DataOUTEndpoint)
-	{
-		/* Configure the HID data OUT pipe */
-		Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
-	}
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct HID Class value.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextHIDInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	/* Determine if the current descriptor is an interface descriptor */
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the HID descriptor class, break out if correct class/protocol interface found */
-		if (Interface->Class == HID_CSCP_HIDClass)
-		{
-			/* Indicate that the descriptor being searched for has been found */
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	/* Current descriptor does not match what this comparator is looking for */
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Endpoint descriptor inside the current interface descriptor,
- *  aborting the search if another interface descriptor is found before the required endpoint.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextHIDInterfaceDataEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	/* Determine the type of the current descriptor */
-	if (Header->Type == DTYPE_Endpoint)
-	{
-		/* Indicate that the descriptor being searched for has been found */
-		return DESCRIPTOR_SEARCH_Found;
-	}
-	else if (Header->Type == DTYPE_Interface)
-	{
-		/* Indicate that the search has failed prematurely and should be aborted */
-		return DESCRIPTOR_SEARCH_Fail;
-	}
-
-	/* Current descriptor does not match what this comparator is looking for */
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h
deleted file mode 100644
index 968e67682c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "GenericHIDHost.h"
-
-	/* Macros: */
-		/** Pipe address for the HID data IN pipe. */
-		#define HID_DATA_IN_PIPE          (PIPE_DIR_IN  | 1)
-
-		/** Pipe address for the HID data OUT pipe. */
-		#define HID_DATA_OUT_PIPE         (PIPE_DIR_OUT | 2)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum GenericHIDHost_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextHIDInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextHIDInterfaceDataEndpoint(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c
deleted file mode 100644
index b05dfa8eb6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the GenericHIDHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "GenericHIDHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Generic HID Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		ReadNextReport();
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	uint8_t ErrorCode;
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	puts_P(PSTR("HID Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Reads in and processes the next report from the attached device, displaying the report
- *  contents on the board LEDs and via the serial port.
- */
-void ReadNextReport(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	/* Select and unfreeze HID data IN pipe */
-	Pipe_SelectPipe(HID_DATA_IN_PIPE);
-	Pipe_Unfreeze();
-
-	/* Check to see if a packet has been received */
-	if (!(Pipe_IsINReceived()))
-	{
-		/* Refreeze HID data IN pipe */
-		Pipe_Freeze();
-
-		return;
-	}
-
-	/* Ensure pipe contains data before trying to read from it */
-	if (Pipe_IsReadWriteAllowed())
-	{
-		uint8_t ReportINData[Pipe_BytesInPipe()];
-
-		/* Read in HID report data */
-		Pipe_Read_Stream_LE(&ReportINData, sizeof(ReportINData), NULL);
-
-		/* Print report data through the serial port */
-		for (uint16_t CurrByte = 0; CurrByte < sizeof(ReportINData); CurrByte++)
-		  printf_P(PSTR("0x%02X "), ReportINData[CurrByte]);
-
-		puts_P(PSTR("\r\n"));
-	}
-
-	/* Clear the IN endpoint, ready for next data packet */
-	Pipe_ClearIN();
-
-	/* Refreeze HID data IN pipe */
-	Pipe_Freeze();
-}
-
-/** Writes a report to the attached device.
- *
- *  \param[in] ReportOUTData  Buffer containing the report to send to the device
- *  \param[in] ReportIndex    Index of the report in the device (zero if the device does not use multiple reports)
- *  \param[in] ReportType     Type of report to send, either REPORT_TYPE_OUT or REPORT_TYPE_FEATURE
- *  \param[in] ReportLength   Length of the report to send
- */
-void WriteNextReport(uint8_t* ReportOUTData,
-                     const uint8_t ReportIndex,
-                     const uint8_t ReportType,
-                     uint16_t ReportLength)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	/* Select the HID data OUT pipe */
-	Pipe_SelectPipe(HID_DATA_OUT_PIPE);
-
-	/* Not all HID devices have an OUT endpoint (some require OUT reports to be sent over the
-	 * control endpoint instead) - check to see if the OUT endpoint has been initialized */
-	if (Pipe_IsConfigured() && (ReportType == REPORT_TYPE_OUT))
-	{
-		Pipe_Unfreeze();
-
-		/* Ensure pipe is ready to be written to before continuing */
-		if (!(Pipe_IsOUTReady()))
-		{
-			/* Refreeze the data OUT pipe */
-			Pipe_Freeze();
-
-			return;
-		}
-
-		/* If the report index is used, send it before the report data */
-		if (ReportIndex)
-		  Pipe_Write_8(ReportIndex);
-
-		/* Write out HID report data */
-		Pipe_Write_Stream_LE(ReportOUTData, ReportLength, NULL);
-
-		/* Clear the OUT endpoint, send last data packet */
-		Pipe_ClearOUT();
-
-		/* Refreeze the data OUT pipe */
-		Pipe_Freeze();
-	}
-	else
-	{
-		/* Class specific request to send a HID report to the device */
-		USB_ControlRequest = (USB_Request_Header_t)
-			{
-				.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
-				.bRequest      = HID_REQ_SetReport,
-				.wValue        = ((ReportType << 8) | ReportIndex),
-				.wIndex        = 0,
-				.wLength       = ReportLength,
-			};
-
-		/* Select the control pipe for the request transfer */
-		Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-		/* Send the request to the device */
-		USB_Host_SendControlRequest(ReportOUTData);
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h
deleted file mode 100644
index 065c7ac71b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for GenericHIDHost.c.
- */
-
-#ifndef _GENERICHID_HOST_H_
-#define _GENERICHID_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/interrupt.h>
-		#include <avr/power.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "ConfigDescriptor.h"
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** HID Report Type to indicate an IN report. */
-		#define REPORT_TYPE_IN           1
-
-		/** HID Report Type to indicate an OUT report. */
-		#define REPORT_TYPE_OUT          2
-
-		/** HID Report Type to indicate a FEATURE report. */
-		#define REPORT_TYPE_FEATURE      3
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void ReadNextReport(void);
-		void WriteNextReport(uint8_t* ReportOUTData,
-		                     const uint8_t ReportIndex,
-		                     const uint8_t ReportType,
-		                     uint16_t ReportLength);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.txt
deleted file mode 100644
index 1c9b1875a9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Generic HID Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Generic HID host demonstration application. This gives a simple reference
- *  application for implementing a Generic HID USB host, for any device implementing
- *  the HID profile.
- *
- *  Received reports from the attached device are printed to the serial port.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/asf.xml
deleted file mode 100644
index 2321a8139c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/asf.xml
+++ /dev/null
@@ -1,50 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Generic HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.generic_hid.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.generic_hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.generic_hid" caption="Generic HID Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Generic HID Host demo, implementing a basic USB HID device that can send and receive data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="GenericHIDHost.txt"/>

-

-		<build type="c-source" value="GenericHIDHost.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="header-file" value="GenericHIDHost.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/doxyfile
deleted file mode 100644
index 21dad31cc9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Generic HID Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/makefile
deleted file mode 100644
index 33a8b7e36a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/GenericHIDHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = GenericHIDHost
-SRC          = $(TARGET).c ConfigDescriptor.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c
deleted file mode 100644
index 50740e02d3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a HID interface descriptor containing at least one Interrupt type IN endpoint and HID descriptor.
- *
- *  \return An error code from the \ref JoystickHostWithParser_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* HIDInterface   = NULL;
-	USB_HID_Descriptor_HID_t*   HIDDescriptor  = NULL;
-	USB_Descriptor_Endpoint_t*  DataINEndpoint = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataINEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(HIDInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextJoystickInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Get the next HID interface from the configuration descriptor */
-			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-										  DComp_NextJoystickInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Descriptor not found, error out */
-				return NoCompatibleInterfaceFound;
-			}
-
-			/* Save the interface in case we need to refer back to it later */
-			HIDInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-			/* Get the HID descriptor from the configuration descriptor */
-			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-										  DComp_NextHID) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Descriptor not found, error out */
-				return NoCompatibleInterfaceFound;
-			}
-
-			/* Save the HID descriptor for later use */
-			HIDDescriptor = DESCRIPTOR_PCAST(CurrConfigLocation, USB_HID_Descriptor_HID_t);
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* If the endpoint is a IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		  DataINEndpoint = EndpointData;
-	}
-
-	/* Configure the HID data IN pipe */
-	Pipe_ConfigurePipe(JOYSTICK_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-	Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS);
-
-	/* Get the HID report size from the HID report descriptor */
-	HIDReportSize = HIDDescriptor->HIDReportLength;
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct Joystick HID Class and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextJoystickInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the HID descriptor class, break out if correct class interface found */
-		if ((Interface->Class == HID_CSCP_HIDClass))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Endpoint descriptor inside the current interface descriptor, aborting the
- *  search if another interface descriptor is found before the required endpoint.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextJoystickInterfaceDataEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Endpoint)
-	  return DESCRIPTOR_SEARCH_Found;
-	else if (Header->Type == DTYPE_Interface)
-	  return DESCRIPTOR_SEARCH_Fail;
-	else
-	  return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next HID descriptor within the current HID interface descriptor.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextHID(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == HID_DTYPE_HID)
-	  return DESCRIPTOR_SEARCH_Found;
-	else
-	  return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h
deleted file mode 100644
index b351a9ddcf..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "HIDReport.h"
-
-	/* Macros: */
-		/** Pipe address for the joystick report data pipe. */
-		#define JOYSTICK_DATA_IN_PIPE       (PIPE_DIR_IN | 1)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum JoystickHostWithParser_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoHIDInterfaceFound             = 4, /**< A compatible HID interface was not found in the device's Configuration Descriptor */
-			NoHIDDescriptorFound            = 5, /**< A compatible HID descriptor was not found in the device's HID interface */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextJoystickInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextJoystickInterfaceDataEndpoint(void* CurrentDescriptor);
-		uint8_t DComp_NextHID(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/HIDReport.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/HIDReport.c
deleted file mode 100644
index 8a5cecf4d4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/HIDReport.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-#include "HIDReport.h"
-
-/** Size in bytes of the attached device's HID report descriptor */
-uint16_t         HIDReportSize;
-
-/** Processed HID report descriptor items structure, containing information on each HID report element */
-HID_ReportInfo_t HIDReportInfo;
-
-
-/** Function to read in the HID report descriptor from the attached device, and process it into easy-to-read
- *  structures via the HID parser routines in the LUFA library.
- *
- *  \return  A value from the \ref JoystickHostWithParser_GetHIDReportDataCodes_t enum
- */
-uint8_t GetHIDReportData(void)
-{
-	/* Create a buffer big enough to hold the entire returned HID report */
-	uint8_t HIDReportData[HIDReportSize];
-
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE),
-			.bRequest      = REQ_GetDescriptor,
-			.wValue        = (HID_DTYPE_Report << 8),
-			.wIndex        = 0,
-			.wLength       = HIDReportSize,
-		};
-
-	/* Select the control pipe for the request transfer */
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	/* Send control request to retrieve the HID report from the attached device */
-	if (USB_Host_SendControlRequest(HIDReportData) != HOST_SENDCONTROL_Successful)
-	  return ParseControlError;
-
-	/* Send the HID report to the parser for processing */
-	if (USB_ProcessHIDReport(HIDReportData, HIDReportSize, &HIDReportInfo) != HID_PARSE_Successful)
-	  return ParseError;
-
-	return ParseSuccessful;
-}
-
-/** Callback for the HID Report Parser. This function is called each time the HID report parser is about to store
- *  an IN, OUT or FEATURE item into the HIDReportInfo structure. To save on RAM, we are able to filter out items
- *  we aren't interested in (preventing us from being able to extract them later on, but saving on the RAM they would
- *  have occupied).
- *
- *  \param[in] CurrentItem  Pointer to the item the HID report parser is currently working with
- *
- *  \return Boolean \c true if the item should be stored into the HID report structure, \c false if it should be discarded
- */
-bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem)
-{
-	bool IsJoystick = false;
-
-	/* Iterate through the item's collection path, until either the root collection node or a collection with the
-	 * Joystick Usage is found - this prevents Mice, which use identical descriptors except for the Mouse usage
-	 * parent node, from being erroneously treated as a joystick
-	 */
-	for (HID_CollectionPath_t* CurrPath = CurrentItem->CollectionPath; CurrPath != NULL; CurrPath = CurrPath->Parent)
-	{
-		if ((CurrPath->Usage.Page  == USAGE_PAGE_GENERIC_DCTRL) &&
-		    (CurrPath->Usage.Usage == USAGE_JOYSTICK))
-		{
-			IsJoystick = true;
-			break;
-		}
-	}
-
-	/* If a collection with the joystick usage was not found, indicate that we are not interested in this item */
-	if (!IsJoystick)
-	  return false;
-
-	/* Check the attributes of the current joystick item - see if we are interested in it or not;
-	 * only store BUTTON and GENERIC_DESKTOP_CONTROL items into the Processed HID Report
-	 * structure to save RAM and ignore the rest
-	 */
-	return ((CurrentItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) ||
-	        (CurrentItem->Attributes.Usage.Page == USAGE_PAGE_GENERIC_DCTRL));
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/HIDReport.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/HIDReport.h
deleted file mode 100644
index 81c690d550..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/HIDReport.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for HIDReport.c.
- */
-
-#ifndef _HID_REPORT_H_
-#define _HID_REPORT_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "JoystickHostWithParser.h"
-
-	/* Macros: */
-		/** HID Report Descriptor Usage Page value for a toggle button. */
-		#define USAGE_PAGE_BUTTON           0x09
-
-		/** HID Report Descriptor Usage Page value for a Generic Desktop Control. */
-		#define USAGE_PAGE_GENERIC_DCTRL    0x01
-
-		/** HID Report Descriptor Usage for a Joystick. */
-		#define USAGE_JOYSTICK              0x04
-
-		/** HID Report Descriptor Usage value for a X axis movement. */
-		#define USAGE_X                     0x30
-
-		/** HID Report Descriptor Usage value for a Y axis movement. */
-		#define USAGE_Y                     0x31
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref GetHIDReportData() function. */
-		enum JoystickHostWithParser_GetHIDReportDataCodes_t
-		{
-			ParseSuccessful         = 0, /**< HID report descriptor parsed successfully */
-			ParseError              = 1, /**< Failed to fully process the HID report descriptor */
-			ParseControlError       = 2, /**< Control error occurred while trying to read the device HID descriptor */
-		};
-
-	/* External Variables: */
-		extern uint16_t         HIDReportSize;
-		extern HID_ReportInfo_t HIDReportInfo;
-
-	/* Function Prototypes: */
-		uint8_t GetHIDReportData(void);
-
-		bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.c
deleted file mode 100644
index 1425d74483..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the JoystickHostWithParser demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "JoystickHostWithParser.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Joystick HID Parser Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		JoystickHost_Task();
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	uint8_t ErrorCode;
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	printf_P(PSTR("Processing HID Report (Size %d Bytes).\r\n"), HIDReportSize);
-
-	/* Get and process the device's first HID report descriptor */
-	if ((ErrorCode = GetHIDReportData()) != ParseSuccessful)
-	{
-		puts_P(PSTR(ESC_FG_RED "Report Parse Error.\r\n"));
-
-		if (!(HIDReportInfo.TotalReportItems))
-			puts_P(PSTR("Not a valid Joystick." ESC_FG_WHITE));
-		else
-			printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Joystick Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Task to read and process the HID report descriptor and HID reports from the device
- *  and display the results onto the board LEDs.
- */
-void JoystickHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	/* Select and unfreeze joystick data pipe */
-	Pipe_SelectPipe(JOYSTICK_DATA_IN_PIPE);
-	Pipe_Unfreeze();
-
-	/* Check to see if a packet has been received */
-	if (Pipe_IsINReceived())
-	{
-		/* Check if data has been received from the attached joystick */
-		if (Pipe_IsReadWriteAllowed())
-		{
-			/* Create buffer big enough for the report */
-			uint8_t JoystickReport[Pipe_BytesInPipe()];
-
-			/* Load in the joystick report */
-			Pipe_Read_Stream_LE(JoystickReport, Pipe_BytesInPipe(), NULL);
-
-			/* Process the read in joystick report from the device */
-			ProcessJoystickReport(JoystickReport);
-		}
-
-		/* Clear the IN endpoint, ready for next data packet */
-		Pipe_ClearIN();
-	}
-
-	/* Freeze joystick data pipe */
-	Pipe_Freeze();
-}
-
-/** Processes a read HID report from an attached joystick, extracting out elements via the HID parser results
- *  as required and displays movement and button presses on the board LEDs.
- *
- *  \param[in] JoystickReport  Pointer to a HID report from an attached joystick device
- */
-void ProcessJoystickReport(uint8_t* JoystickReport)
-{
-	uint8_t LEDMask = LEDS_NO_LEDS;
-
-	/* Check each HID report item in turn, looking for joystick X/Y/button reports */
-	for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++)
-	{
-		/* Create a temporary item pointer to the next report item */
-		HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber];
-
-		bool FoundData;
-
-		if ((ReportItem->Attributes.Usage.Page        == USAGE_PAGE_BUTTON) &&
-			(ReportItem->ItemType                     == HID_REPORT_ITEM_In))
-		{
-			/* Get the joystick button value */
-			FoundData = USB_GetHIDReportItemInfo(JoystickReport, ReportItem);
-
-			/* For multi-report devices - if the requested data was not in the issued report, continue */
-			if (!(FoundData))
-			  continue;
-
-			/* If button is pressed, all LEDs are turned on */
-			if (ReportItem->Value)
-			  LEDMask = LEDS_ALL_LEDS;
-		}
-		else if ((ReportItem->Attributes.Usage.Page   == USAGE_PAGE_GENERIC_DCTRL) &&
-				 ((ReportItem->Attributes.Usage.Usage == USAGE_X)                  ||
-				  (ReportItem->Attributes.Usage.Usage == USAGE_Y))                 &&
-				 (ReportItem->ItemType                == HID_REPORT_ITEM_In))
-		{
-			/* Get the joystick relative position value */
-			FoundData = USB_GetHIDReportItemInfo(JoystickReport, ReportItem);
-
-			/* For multi-report devices - if the requested data was not in the issued report, continue */
-			if (!(FoundData))
-			  continue;
-
-			int16_t DeltaMovement = HID_ALIGN_DATA(ReportItem, int16_t);
-
-			/* Check to see if a (non-zero) delta movement has been indicated */
-			if (DeltaMovement)
-			{
-				/* Determine if the report is for the X or Y delta movement, light LEDs as appropriate */
-				if (ReportItem->Attributes.Usage.Usage == USAGE_X)
-				  LEDMask |= ((DeltaMovement > 0) ? LEDS_LED1 : LEDS_LED2);
-				else
-				  LEDMask |= ((DeltaMovement > 0) ? LEDS_LED3 : LEDS_LED4);
-			}
-		}
-	}
-
-	/* Display the button information on the board LEDs */
-	LEDs_SetAllLEDs(LEDMask);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.h
deleted file mode 100644
index 4a01bcdfb8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for JoystickHostWithParser.c.
- */
-
-#ifndef _JOYSTICK_HOST_H_
-#define _JOYSTICK_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "ConfigDescriptor.h"
-		#include "HIDReport.h"
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void JoystickHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-		void ProcessJoystickReport(uint8_t* JoystickReport);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.txt
deleted file mode 100644
index 9eba4ed864..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Joystick Host With HID Descriptor Parser Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Joystick host demonstration application. This gives a simple reference
- *  application for implementing a USB Joystick host, for USB joysticks using
- *  the standard joystick HID profile. It uses a HID parser for the HID
- *  reports, allowing for correct operation across all USB joysticks. This
- *  demo supports joysticks with a single HID report.
- *
- *  Joystick movement and button presses are displayed on the board LEDs.
- *  On connection to a USB joystick, the report items will be processed and
- *  printed as a formatted list through the USART before the joystick is
- *  fully enumerated.
- *
- *  Currently only single interface joysticks are supported.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/asf.xml
deleted file mode 100644
index f2b919511a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/asf.xml
+++ /dev/null
@@ -1,52 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Joystick HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.joystick_parser.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.joystick_parser"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.joystick_parser" caption="Joystick HID (with parser) Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Joystick HID Host demo with HID parser, implementing a basic USB joystick host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="JoystickHostWithParser.txt"/>

-

-		<build type="c-source" value="JoystickHostWithParser.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="c-source" value="HIDReport.c"/>

-		<build type="header-file" value="JoystickHostWithParser.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-		<build type="header-file" value="HIDReport.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/doxyfile
deleted file mode 100644
index 5af83f00d5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Joystick Host Demo (Using HID Descriptor Parser)"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/makefile
deleted file mode 100644
index 11c7961e1f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/JoystickHostWithParser/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = JoystickHostWithParser
-SRC          = $(TARGET).c ConfigDescriptor.c HIDReport.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c
deleted file mode 100644
index bafece6ba3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a HID interface descriptor containing at least one Interrupt type IN endpoint.
- *
- *  \return An error code from the \ref KeyboardHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* HIDInterface   = NULL;
-	USB_Descriptor_Endpoint_t*  DataINEndpoint = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataINEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(HIDInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextKeyboardInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Get the next HID interface from the configuration descriptor */
-			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-										  DComp_NextKeyboardInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Descriptor not found, error out */
-				return NoCompatibleInterfaceFound;
-			}
-
-			/* Save the interface in case we need to refer back to it later */
-			HIDInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* If the endpoint is a IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		  DataINEndpoint = EndpointData;
-	}
-
-	/* Configure the HID data IN pipe */
-	Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-	Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS);
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct Keyboard HID Class and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextKeyboardInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the HID descriptor class and protocol, break out if correct class/protocol interface found */
-		if ((Interface->Class    == HID_CSCP_HIDClass) &&
-		    (Interface->Protocol == HID_CSCP_KeyboardBootProtocol))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Endpoint descriptor inside the current interface descriptor, aborting the
- *  search if another interface descriptor is found before the required endpoint.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextKeyboardInterfaceDataEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Endpoint)
-	  return DESCRIPTOR_SEARCH_Found;
-	else if (Header->Type == DTYPE_Interface)
-	  return DESCRIPTOR_SEARCH_Fail;
-	else
-	  return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h
deleted file mode 100644
index cc2b26f214..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "KeyboardHost.h"
-
-	/* Macros: */
-		/** Pipe address for the keyboard data IN pipe. */
-		#define KEYBOARD_DATA_IN_PIPE          (PIPE_DIR_IN | 1)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum KeyboardHost_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextKeyboardInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextKeyboardInterfaceDataEndpoint(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c
deleted file mode 100644
index f732b9d327..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the KeyboardHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "KeyboardHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Keyboard HID Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		KeyboardHost_Task();
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	uint8_t ErrorCode;
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* HID class request to set the keyboard protocol to the Boot Protocol */
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
-			.bRequest      = HID_REQ_SetProtocol,
-			.wValue        = 0,
-			.wIndex        = 0,
-			.wLength       = 0,
-		};
-
-	/* Select the control pipe for the request transfer */
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	/* Send the request, display error and wait for device detach if request fails */
-	if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Protocol).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Keyboard Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Task to read in and processes the next report from the attached device, displaying the report
- *  contents on the board LEDs and via the serial port.
- */
-void KeyboardHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	/* Select keyboard data pipe */
-	Pipe_SelectPipe(KEYBOARD_DATA_IN_PIPE);
-
-	/* Unfreeze keyboard data pipe */
-	Pipe_Unfreeze();
-
-	/* Check to see if a packet has been received */
-	if (!(Pipe_IsINReceived()))
-	{
-		/* Refreeze HID data IN pipe */
-		Pipe_Freeze();
-
-		return;
-	}
-
-	/* Ensure pipe contains data before trying to read from it */
-	if (Pipe_IsReadWriteAllowed())
-	{
-		USB_KeyboardReport_Data_t KeyboardReport;
-
-		/* Read in keyboard report data */
-		Pipe_Read_Stream_LE(&KeyboardReport, sizeof(KeyboardReport), NULL);
-
-		/* Indicate if the modifier byte is non-zero (special key such as shift is being pressed) */
-		LEDs_ChangeLEDs(LEDS_LED1, (KeyboardReport.Modifier) ? LEDS_LED1 : 0);
-
-		uint8_t KeyCode = KeyboardReport.KeyCode[0];
-
-		/* Check if a key has been pressed */
-		if (KeyCode)
-		{
-			/* Toggle status LED to indicate keypress */
-			LEDs_ToggleLEDs(LEDS_LED2);
-
-			char PressedKey = 0;
-
-			/* Retrieve pressed key character if alphanumeric */
-			if ((KeyCode >= HID_KEYBOARD_SC_A) && (KeyCode <= HID_KEYBOARD_SC_Z))
-			{
-				PressedKey = (KeyCode - HID_KEYBOARD_SC_A) + 'A';
-			}
-			else if ((KeyCode >= HID_KEYBOARD_SC_1_AND_EXCLAMATION) &
-					 (KeyCode  < HID_KEYBOARD_SC_0_AND_CLOSING_PARENTHESIS))
-			{
-				PressedKey = (KeyCode - HID_KEYBOARD_SC_1_AND_EXCLAMATION) + '1';
-			}
-			else if (KeyCode == HID_KEYBOARD_SC_0_AND_CLOSING_PARENTHESIS)
-			{
-				PressedKey = '0';
-			}
-			else if (KeyCode == HID_KEYBOARD_SC_SPACE)
-			{
-				PressedKey = ' ';
-			}
-			else if (KeyCode == HID_KEYBOARD_SC_ENTER)
-			{
-				PressedKey = '\n';
-			}
-
-			/* Print the pressed key character out through the serial port if valid */
-			if (PressedKey)
-			  putchar(PressedKey);
-		}
-	}
-
-	/* Clear the IN endpoint, ready for next data packet */
-	Pipe_ClearIN();
-
-	/* Refreeze keyboard data pipe */
-	Pipe_Freeze();
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h
deleted file mode 100644
index 74c949afd3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for KeyboardHost.c.
- */
-
-#ifndef _KEYBOARD_HOST_H_
-#define _KEYBOARD_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "ConfigDescriptor.h"
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void KeyboardHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt
deleted file mode 100644
index 206ccc0118..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Keyboard Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Keyboard host demonstration application. This gives a simple reference
- *  application for implementing a USB keyboard host, for USB keyboards using
- *  the standard keyboard HID profile.
- *
- *  Pressed alpha-numeric, enter or space key is transmitted through the serial
- *  USART at serial settings 9600, 8, N, 1.
- *
- *  This uses a naive method where the keyboard is set to Boot Protocol mode, so
- *  that the report structure is fixed and known. A better implementation
- *  uses the HID report parser for correct report data processing across
- *  all compatible mice with advanced characteristics, as shown in the
- *  KeyboardHostWithParser demo application.
- *
- *  Currently only single interface keyboards are supported.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/asf.xml
deleted file mode 100644
index 1256e35404..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/asf.xml
+++ /dev/null
@@ -1,50 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Keyboard HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.keyboard.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.keyboard"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.keyboard" caption="Keyboard HID Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Keyboard HID Host demo, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="KeyboardHost.txt"/>

-

-		<build type="c-source" value="KeyboardHost.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="header-file" value="KeyboardHost.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/doxyfile
deleted file mode 100644
index 6ac6b05252..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Keyboard Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/makefile
deleted file mode 100644
index 2a78d15034..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = KeyboardHost
-SRC          = $(TARGET).c ConfigDescriptor.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c
deleted file mode 100644
index 59d8ea432b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a HID interface descriptor containing at least one Interrupt type IN endpoint and HID descriptor.
- *
- *  \return An error code from the \ref KeyboardHostWithParser_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* HIDInterface   = NULL;
-	USB_HID_Descriptor_HID_t*   HIDDescriptor  = NULL;
-	USB_Descriptor_Endpoint_t*  DataINEndpoint = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataINEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(HIDInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextKeyboardInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Get the next HID interface from the configuration descriptor */
-			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-										  DComp_NextKeyboardInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Descriptor not found, error out */
-				return NoCompatibleInterfaceFound;
-			}
-
-			/* Save the interface in case we need to refer back to it later */
-			HIDInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-			/* Get the HID descriptor from the configuration descriptor */
-			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-										  DComp_NextHID) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Descriptor not found, error out */
-				return NoCompatibleInterfaceFound;
-			}
-
-			/* Save the HID descriptor for later use */
-			HIDDescriptor = DESCRIPTOR_PCAST(CurrConfigLocation, USB_HID_Descriptor_HID_t);
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* If the endpoint is a IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		  DataINEndpoint = EndpointData;
-	}
-
-	/* Configure the HID data IN pipe */
-	Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-	Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS);
-
-	/* Get the HID report size from the HID report descriptor */
-	HIDReportSize = HIDDescriptor->HIDReportLength;
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct Keyboard HID Class and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextKeyboardInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the HID descriptor class, break out if correct class interface found */
-		if (Interface->Class == HID_CSCP_HIDClass)
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Endpoint descriptor inside the current interface descriptor, aborting the
- *  search if another interface descriptor is found before the required endpoint.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextKeyboardInterfaceDataEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Endpoint)
-	  return DESCRIPTOR_SEARCH_Found;
-	else if (Header->Type == DTYPE_Interface)
-	  return DESCRIPTOR_SEARCH_Fail;
-	else
-	  return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next HID descriptor within the current HID interface descriptor.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextHID(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == HID_DTYPE_HID)
-	  return DESCRIPTOR_SEARCH_Found;
-	else if (Header->Type == DTYPE_Interface)
-	  return DESCRIPTOR_SEARCH_Fail;
-	else
-	  return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h
deleted file mode 100644
index 20403becd5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "HIDReport.h"
-
-	/* Macros: */
-		/** Pipe address for the keyboard report data IN pipe. */
-		#define KEYBOARD_DATA_IN_PIPE          (PIPE_DIR_IN | 1)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum KeyboardHostWithParser_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextKeyboardInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextKeyboardInterfaceDataEndpoint(void* CurrentDescriptor);
-		uint8_t DComp_NextHID(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.c
deleted file mode 100644
index 3bae3f52da..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-#include "HIDReport.h"
-
-/** Size in bytes of the attached device's HID report descriptor */
-uint16_t         HIDReportSize;
-
-/** Processed HID report descriptor items structure, containing information on each HID report element */
-HID_ReportInfo_t HIDReportInfo;
-
-
-/** Function to read in the HID report descriptor from the attached device, and process it into easy-to-read
- *  structures via the HID parser routines in the LUFA library.
- *
- *  \return A value from the \ref KeyboardHostWithParser_GetHIDReportDataCodes_t enum
- */
-uint8_t GetHIDReportData(void)
-{
-	/* Create a buffer big enough to hold the entire returned HID report */
-	uint8_t HIDReportData[HIDReportSize];
-
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE),
-			.bRequest      = REQ_GetDescriptor,
-			.wValue        = (HID_DTYPE_Report << 8),
-			.wIndex        = 0,
-			.wLength       = HIDReportSize,
-		};
-
-	/* Select the control pipe for the request transfer */
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	/* Send control request to retrieve the HID report from the attached device */
-	if (USB_Host_SendControlRequest(HIDReportData) != HOST_SENDCONTROL_Successful)
-	  return ParseControlError;
-
-	/* Send the HID report to the parser for processing */
-	if (USB_ProcessHIDReport(HIDReportData, HIDReportSize, &HIDReportInfo) != HID_PARSE_Successful)
-	  return ParseError;
-
-	return ParseSuccessful;
-}
-
-/** Callback for the HID Report Parser. This function is called each time the HID report parser is about to store
- *  an IN, OUT or FEATURE item into the HIDReportInfo structure. To save on RAM, we are able to filter out items
- *  we aren't interested in (preventing us from being able to extract them later on, but saving on the RAM they would
- *  have occupied).
- *
- *  \param[in] CurrentItem  Pointer to the item the HID report parser is currently working with
- *
- *  \return Boolean \c true if the item should be stored into the HID report structure, \c false if it should be discarded
- */
-bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem)
-{
-	/* Check the attributes of the current item - see if we are interested in it or not;
-	 * only store KEYBOARD usage page items into the Processed HID Report structure to
-	 * save RAM and ignore the rest
-	 */
-	return (CurrentItem->Attributes.Usage.Page == USAGE_PAGE_KEYBOARD);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h
deleted file mode 100644
index d7c45713d9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for HIDReport.c.
- */
-
-#ifndef _HID_REPORT_H_
-#define _HID_REPORT_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "KeyboardHostWithParser.h"
-
-	/* Macros: */
-		/** HID Report Descriptor Usage Page value for a desktop keyboard. */
-		#define USAGE_PAGE_KEYBOARD             0x07
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref GetHIDReportData() function. */
-		enum KeyboardHostWithParser_GetHIDReportDataCodes_t
-		{
-			ParseSuccessful         = 0, /**< HID report descriptor parsed successfully */
-			ParseError              = 1, /**< Failed to fully process the HID report descriptor */
-			ParseControlError       = 2, /**< Control error occurred while trying to read the device HID descriptor */
-		};
-
-	/* External Variables: */
-		extern uint16_t         HIDReportSize;
-		extern HID_ReportInfo_t HIDReportInfo;
-
-	/* Function Prototypes: */
-		uint8_t GetHIDReportData(void);
-
-		bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c
deleted file mode 100644
index 699179235f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the KeyboardHostWithParser demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "KeyboardHostWithParser.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Keyboard HID Parser Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		KeyboardHost_Task();
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	uint8_t ErrorCode;
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-
-	{
-		puts_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"));
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	printf_P(PSTR("Processing HID Report (Size %d Bytes).\r\n"), HIDReportSize);
-
-	/* Get and process the device's first HID report descriptor */
-	if ((ErrorCode = GetHIDReportData()) != ParseSuccessful)
-	{
-		puts_P(PSTR(ESC_FG_RED "Report Parse Error.\r\n"));
-
-		if (!(HIDReportInfo.TotalReportItems))
-			puts_P(PSTR("Not a valid Keyboard." ESC_FG_WHITE));
-		else
-			printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Keyboard Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Task to read in and processes the next report from the attached device, displaying the report
- *  contents on the board LEDs and via the serial port.
- */
-void KeyboardHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	/* Select and unfreeze keyboard data pipe */
-	Pipe_SelectPipe(KEYBOARD_DATA_IN_PIPE);
-	Pipe_Unfreeze();
-
-	/* Check to see if a packet has been received */
-	if (Pipe_IsINReceived())
-	{
-		/* Check if data has been received from the attached keyboard */
-		if (Pipe_IsReadWriteAllowed())
-		{
-			/* Create buffer big enough for the report */
-			uint8_t KeyboardReport[Pipe_BytesInPipe()];
-
-			/* Load in the keyboard report */
-			Pipe_Read_Stream_LE(KeyboardReport, Pipe_BytesInPipe(), NULL);
-
-			/* Process the read in keyboard report from the device */
-			ProcessKeyboardReport(KeyboardReport);
-		}
-
-		/* Clear the IN endpoint, ready for next data packet */
-		Pipe_ClearIN();
-	}
-
-	/* Freeze keyboard data pipe */
-	Pipe_Freeze();
-}
-
-/** Processes a read HID report from an attached keyboard, extracting out elements via the HID parser results
- *  as required and prints pressed characters to the serial port. Each time a key is typed, a board LED is toggled.
- *
- *  \param[in] KeyboardReport  Pointer to a HID report from an attached keyboard device
- */
-void ProcessKeyboardReport(uint8_t* KeyboardReport)
-{
-	/* Check each HID report item in turn, looking for keyboard scan code reports */
-	for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++)
-	{
-		/* Create a temporary item pointer to the next report item */
-		HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber];
-
-		/* Check if the current report item is a keyboard scan-code */
-		if ((ReportItem->Attributes.Usage.Page      == USAGE_PAGE_KEYBOARD) &&
-			(ReportItem->Attributes.BitSize         == 8)                   &&
-			(ReportItem->Attributes.Logical.Maximum > 1)                    &&
-			(ReportItem->ItemType                   == HID_REPORT_ITEM_In))
-		{
-			/* Retrieve the keyboard scan-code from the report data retrieved from the device */
-			bool FoundData = USB_GetHIDReportItemInfo(KeyboardReport, ReportItem);
-
-			/* For multi-report devices - if the requested data was not in the issued report, continue */
-			if (!(FoundData))
-			  continue;
-
-			/* Key code is an unsigned char in length, cast to the appropriate type */
-			uint8_t KeyCode = (uint8_t)ReportItem->Value;
-
-			/* If scan-code is non-zero, a key is being pressed */
-			if (KeyCode)
-			{
-				/* Toggle status LED to indicate keypress */
-				LEDs_ToggleLEDs(LEDS_LED2);
-
-				char PressedKey = 0;
-
-				/* Retrieve pressed key character if alphanumeric */
-				if ((KeyCode >= HID_KEYBOARD_SC_A) && (KeyCode <= HID_KEYBOARD_SC_Z))
-				{
-					PressedKey = (KeyCode - HID_KEYBOARD_SC_A) + 'A';
-				}
-				else if ((KeyCode >= HID_KEYBOARD_SC_1_AND_EXCLAMATION) &
-						 (KeyCode  < HID_KEYBOARD_SC_0_AND_CLOSING_PARENTHESIS))
-				{
-					PressedKey = (KeyCode - HID_KEYBOARD_SC_1_AND_EXCLAMATION) + '1';
-				}
-				else if (KeyCode == HID_KEYBOARD_SC_0_AND_CLOSING_PARENTHESIS)
-				{
-					PressedKey = '0';
-				}
-				else if (KeyCode == HID_KEYBOARD_SC_SPACE)
-				{
-					PressedKey = ' ';
-				}
-				else if (KeyCode == HID_KEYBOARD_SC_ENTER)
-				{
-					PressedKey = '\n';
-				}
-
-				/* Print the pressed key character out through the serial port if valid */
-				if (PressedKey)
-				  putchar(PressedKey);
-			}
-
-			/* Once a scan-code is found, stop scanning through the report items */
-			break;
-		}
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h
deleted file mode 100644
index 00a000a928..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-#ifndef _KEYBOARD_HOST_H_
-#define _KEYBOARD_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "ConfigDescriptor.h"
-		#include "HIDReport.h"
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void KeyboardHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-		void ProcessKeyboardReport(uint8_t* KeyboardReport);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt
deleted file mode 100644
index 4c87965ca4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Keyboard Host With HID Descriptor Parser Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Keyboard host demonstration application. This gives a simple reference
- *  application for implementing a USB Keyboard host, for USB keyboards using
- *  the standard Keyboard HID profile. It uses a HID parser for the HID reports,
- *  allowing for correct operation across all USB keyboards. This demo supports
- *  keyboards with a single HID report.
- *
- *  Pressed alpha-numeric, enter or space key is transmitted through the serial
- *  USART at serial settings 9600, 8, N, 1. On connection to a USB keyboard, the
- *  report items will be processed and printed as a formatted list through the
- *  USART before the keyboard is fully enumerated.
- *
- *  Currently only single interface keyboards are supported.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/asf.xml
deleted file mode 100644
index beeaff9b72..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/asf.xml
+++ /dev/null
@@ -1,52 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Keyboard HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.keyboard_parser.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.keyboard_parser"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.keyboard_parser" caption="Keyboard HID (with parser) Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Keyboard HID Host demo with HID parser, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="KeyboardHostWithParser.txt"/>

-

-		<build type="c-source" value="KeyboardHostWithParser.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="c-source" value="HIDReport.c"/>

-		<build type="header-file" value="KeyboardHostWithParser.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-		<build type="header-file" value="HIDReport.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/doxyfile
deleted file mode 100644
index e014d3ed70..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Keyboard Host Demo (Using HID Descriptor Parser)"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
deleted file mode 100644
index c5b2a66743..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = KeyboardHostWithParser
-SRC          = $(TARGET).c ConfigDescriptor.c HIDReport.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c
deleted file mode 100644
index f0c93e45aa..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a MIDI interface descriptor pair containing bulk data IN and OUT endpoints.
- *
- *  \return An error code from the \ref MIDIHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* MIDIInterface   = NULL;
-	USB_Descriptor_Endpoint_t*  DataINEndpoint  = NULL;
-	USB_Descriptor_Endpoint_t*  DataOUTEndpoint = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataINEndpoint) || !(DataOUTEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(MIDIInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextMIDIStreamingDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Get the next Mass Storage interface from the configuration descriptor */
-			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-										  DComp_NextMIDIStreamingInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Descriptor not found, error out */
-				return NoCompatibleInterfaceFound;
-			}
-
-			/* Save the interface in case we need to refer back to it later */
-			MIDIInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-			/* Clear any found endpoints */
-			DataINEndpoint  = NULL;
-			DataOUTEndpoint = NULL;
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* If the endpoint is a IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		  DataINEndpoint  = EndpointData;
-		else
-		  DataOUTEndpoint = EndpointData;
-	}
-
-	/* Configure the MIDI data IN pipe */
-	Pipe_ConfigurePipe(MIDI_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-
-	/* Configure the MIDI data OUT pipe */
-	Pipe_ConfigurePipe(MIDI_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct MIDI Streaming Class, Subclass and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextMIDIStreamingInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the MIDI descriptor class, subclass and protocol, break out if correct data interface found */
-		if ((Interface->Class    == AUDIO_CSCP_AudioClass)            &&
-		    (Interface->SubClass == AUDIO_CSCP_MIDIStreamingSubclass) &&
-		    (Interface->Protocol == AUDIO_CSCP_StreamingProtocol))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next bulk IN or OUT endpoint within the current interface, aborting the search if
- *  another interface descriptor is found before the required endpoint.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextMIDIStreamingDataEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Endpoint)
-	{
-		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
-		/* Check the endpoint type, break out if correct BULK type endpoint found */
-		if ((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_BULK)
-		  return DESCRIPTOR_SEARCH_Found;
-	}
-	else if (Header->Type == DTYPE_Interface)
-	{
-		return DESCRIPTOR_SEARCH_Fail;
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h
deleted file mode 100644
index 25e49fbee7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "MIDIHost.h"
-
-	/* Macros: */
-		/** Pipe address for the MIDI data IN pipe. */
-		#define MIDI_DATA_IN_PIPE              (PIPE_DIR_IN  | 1)
-
-		/** Pipe address for the MIDI data OUT pipe. */
-		#define MIDI_DATA_OUT_PIPE             (PIPE_DIR_OUT | 2)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum MIDIHost_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextMIDIStreamingInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextMIDIStreamingDataEndpoint(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/MIDIHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/MIDIHost.c
deleted file mode 100644
index 8c37403fff..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/MIDIHost.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MIDIHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "MIDIHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "MIDI Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		MIDIHost_Task();
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	Buttons_Init();
-	Joystick_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	uint8_t ErrorCode;
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	puts_P(PSTR("MIDI Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Task to read in note on/off messages from the attached MIDI device and print it to the serial port.
- *  When the board joystick or buttons are pressed, note on/off messages are sent to the attached device.
- */
-void MIDIHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	Pipe_SelectPipe(MIDI_DATA_IN_PIPE);
-	Pipe_Unfreeze();
-
-	if (Pipe_IsINReceived())
-	{
-		MIDI_EventPacket_t MIDIEvent;
-
-		Pipe_Read_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
-
-		if (!(Pipe_BytesInPipe()))
-		  Pipe_ClearIN();
-
-		bool NoteOnEvent  = (MIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON));
-		bool NoteOffEvent = (MIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_OFF));
-
-		if (NoteOnEvent || NoteOffEvent)
-		{
-			printf_P(PSTR("MIDI Note %s - Channel %d, Pitch %d, Velocity %d\r\n"), NoteOnEvent ? "On" : "Off",
-																				   ((MIDIEvent.Data1 & 0x0F) + 1),
-																				   MIDIEvent.Data2, MIDIEvent.Data3);
-		}
-	}
-
-	Pipe_Freeze();
-
-	Pipe_SelectPipe(MIDI_DATA_OUT_PIPE);
-	Pipe_Unfreeze();
-
-	if (Pipe_IsOUTReady())
-	{
-		uint8_t MIDICommand = 0;
-		uint8_t MIDIPitch;
-
-		static uint8_t PrevJoystickStatus;
-		uint8_t JoystickStatus  = Joystick_GetStatus();
-		uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);
-
-		/* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */
-		uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1));
-
-		if (JoystickChanges & JOY_LEFT)
-		{
-			MIDICommand = ((JoystickStatus & JOY_LEFT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-			MIDIPitch   = 0x3C;
-		}
-
-		if (JoystickChanges & JOY_UP)
-		{
-			MIDICommand = ((JoystickStatus & JOY_UP)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-			MIDIPitch   = 0x3D;
-		}
-
-		if (JoystickChanges & JOY_RIGHT)
-		{
-			MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-			MIDIPitch   = 0x3E;
-		}
-
-		if (JoystickChanges & JOY_DOWN)
-		{
-			MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-			MIDIPitch   = 0x3F;
-		}
-
-		if (JoystickChanges & JOY_PRESS)
-		{
-			MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF);
-			MIDIPitch   = 0x3B;
-		}
-
-		/* Check if a MIDI command is to be sent */
-		if (MIDICommand)
-		{
-			MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t)
-				{
-					.Event       = MIDI_EVENT(0, MIDICommand),
-
-					.Data1       = MIDICommand | Channel,
-					.Data2       = MIDIPitch,
-					.Data3       = MIDI_STANDARD_VELOCITY,
-				};
-
-			/* Write the MIDI event packet to the pipe */
-			Pipe_Write_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL);
-
-			/* Send the data in the pipe to the device */
-			Pipe_ClearOUT();
-		}
-
-		Pipe_Freeze();
-
-		/* Save previous joystick value for next joystick change detection */
-		PrevJoystickStatus = JoystickStatus;
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/MIDIHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/MIDIHost.h
deleted file mode 100644
index 6741e7a74c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/MIDIHost.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MIDIHost.c.
- */
-
-#ifndef _MIDI_HOST_H_
-#define _MIDI_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "ConfigDescriptor.h"
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void MIDIHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt
deleted file mode 100644
index 33a8319f06..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage MIDI Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>MIDI Subclass</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF USB MIDI Audio Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incoming MIDI note
- *  on and off messages on any channel to the serial port. Pressing the board joystick will send note on and off messages to
- *  the attached MIDI device, with the board HWB controlling the note channel.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/asf.xml
deleted file mode 100644
index 0a19a117df..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/asf.xml
+++ /dev/null
@@ -1,52 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="MIDI Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.midi.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.midi"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.midi" caption="MIDI Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		MIDI Host demo, capable of sending and receiving MIDI messages to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="MIDI Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MIDIHost.txt"/>

-

-		<build type="c-source" value="MIDIHost.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="header-file" value="MIDIHost.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-		<require idref="lufa.drivers.board.joystick"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/doxyfile
deleted file mode 100644
index d675057e9b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - MIDI Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/makefile
deleted file mode 100644
index 3f4611dcb3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MIDIHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MIDIHost
-SRC          = $(TARGET).c ConfigDescriptor.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/Config/LUFAConfig.h
deleted file mode 100644
index 539b0a694d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-		#define USB_STREAM_TIMEOUT_MS            5000
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c
deleted file mode 100644
index 4eebc14b27..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a MSD interface descriptor containing bulk IN and OUT data endpoints.
- *
- *  \return An error code from the \ref MassStorageHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* MSInterface     = NULL;
-	USB_Descriptor_Endpoint_t*  DataINEndpoint  = NULL;
-	USB_Descriptor_Endpoint_t*  DataOUTEndpoint = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataINEndpoint) || !(DataOUTEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(MSInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextMSInterfaceBulkDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Get the next Mass Storage interface from the configuration descriptor */
-			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-										  DComp_NextMSInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Descriptor not found, error out */
-				return NoCompatibleInterfaceFound;
-			}
-
-			/* Save the interface in case we need to refer back to it later */
-			MSInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-			/* Clear any found endpoints */
-			DataINEndpoint  = NULL;
-			DataOUTEndpoint = NULL;
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* If the endpoint is a IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		  DataINEndpoint  = EndpointData;
-		else
-		  DataOUTEndpoint = EndpointData;
-	}
-
-	/* Configure the Mass Storage data IN pipe */
-	Pipe_ConfigurePipe(MASS_STORE_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-
-	/* Configure the Mass Storage data OUT pipe */
-	Pipe_ConfigurePipe(MASS_STORE_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct Mass Storage Class, Subclass and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextMSInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the descriptor class and protocol, break out if correct class/protocol interface found */
-		if ((Interface->Class    == MASS_STORE_CLASS)    &&
-		    (Interface->SubClass == MASS_STORE_SUBCLASS) &&
-		    (Interface->Protocol == MASS_STORE_PROTOCOL))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Bulk Endpoint descriptor of the correct MSD interface, aborting the search if
- *  another interface descriptor is found before the next endpoint.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextMSInterfaceBulkDataEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Endpoint)
-	{
-		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
-		/* Check the endpoint type, break out if correct BULK type endpoint found */
-		if ((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_BULK)
-		  return DESCRIPTOR_SEARCH_Found;
-	}
-	else if (Header->Type == DTYPE_Interface)
-	{
-		return DESCRIPTOR_SEARCH_Fail;
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h
deleted file mode 100644
index 156a23eb50..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "MassStorageHost.h"
-
-	/* Macros: */
-		/** Interface Class value for the Mass Storage Device class. */
-		#define MASS_STORE_CLASS               0x08
-
-		/** Interface Class value for the Mass Storage Device subclass. */
-		#define MASS_STORE_SUBCLASS            0x06
-
-		/** Interface Protocol value for the Bulk Only transport protocol. */
-		#define MASS_STORE_PROTOCOL            0x50
-
-		/** Pipe address of the Mass Storage data IN pipe. */
-		#define MASS_STORE_DATA_IN_PIPE        (PIPE_DIR_IN  | 1)
-
-		/** Pipe address of the Mass Storage data OUT pipe. */
-		#define MASS_STORE_DATA_OUT_PIPE       (PIPE_DIR_OUT | 2)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum MassStorageHost_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextMSInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextMSInterfaceBulkDataEndpoint(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c
deleted file mode 100644
index 2c803eb96d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c
+++ /dev/null
@@ -1,635 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Mass Storage Device commands, to issue MSD commands to the device for
- *  reading device status, capacity, and other characteristics. This file
- *  also contains block read and write functions, so that device blocks
- *  can be read and written. In general, these functions would be chained
- *  to a FAT library to give file-level access to an attached device's contents.
- *
- *  \note Many Mass Storage devices on the market are non-compliant to the
- *        specifications and thus can prove difficult to interface with. It
- *        may be necessary to retry the functions in the module several times
- *        after they have returned and error to successfully send the command
- *        to the device. Some devices may also need to have the stream function
- *        timeout period extended beyond 100ms (some badly designed devices exceeding
- *        1.5 seconds occasionally) by defining USB_STREAM_TIMEOUT_MS to a
- *        larger value in the project makefile and passing it to the compiler
- *        via the -D switch.
- */
-
-#define  INCLUDE_FROM_MASSSTORE_COMMANDS_C
-#include "MassStoreCommands.h"
-
-/** Current Tag value used in issued CBWs to the device. This is automatically incremented
- *  each time a command is sent, and is not externally accessible.
- */
-static uint32_t MassStore_Tag = 1;
-
-
-/** Routine to send the current CBW to the device, and increment the Tag value as needed.
- *
- *  \param[in] SCSICommandBlock  Pointer to a SCSI command block structure to send to the attached device
- *  \param[in,out] BufferPtr     Pointer to a buffer for the data to send or receive to/from the device, or NULL if no data
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
- */
-static uint8_t MassStore_SendCommand(MS_CommandBlockWrapper_t* const SCSICommandBlock,
-                                     void* BufferPtr)
-{
-	uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
-
-	/* Wrap Tag value when invalid - MS class defines tag values of 0 and 0xFFFFFFFF to be invalid */
-	if (++MassStore_Tag == 0xFFFFFFFF)
-	  MassStore_Tag = 1;
-
-	/* Each transmission should have a unique tag value, increment before use */
-	SCSICommandBlock->Tag = MassStore_Tag;
-
-	/* Select the OUT data pipe for CBW transmission */
-	Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
-	Pipe_Unfreeze();
-
-	/* Write the CBW command to the OUT pipe */
-	if ((ErrorCode = Pipe_Write_Stream_LE(SCSICommandBlock, sizeof(MS_CommandBlockWrapper_t), NULL)) !=
-	                                      PIPE_RWSTREAM_NoError)
-	{
-		Pipe_Freeze();
-		return ErrorCode;
-	}
-
-	/* Send the data in the OUT pipe to the attached device */
-	Pipe_ClearOUT();
-
-	/* Wait until command has been sent */
-	Pipe_WaitUntilReady();
-
-	/* Freeze pipe after use */
-	Pipe_Freeze();
-
-	if (BufferPtr != NULL)
-	{
-		/* Transfer the requested data (if any) to or from the device */
-		ErrorCode = MassStore_SendReceiveData(SCSICommandBlock, (void*)BufferPtr);
-
-		/* Only fail completely if the transfer fails without a STALL, as a logical STALL can be recovered from */
-		if ((ErrorCode != PIPE_RWSTREAM_NoError) && (ErrorCode != PIPE_RWSTREAM_PipeStalled))
-		{
-			Pipe_Freeze();
-			return ErrorCode;
-		}
-	}
-
-	/* Retrieve the returned SCSI status from the device */
-	MS_CommandStatusWrapper_t SCSIStatusBlock;
-	return MassStore_GetReturnedStatus(&SCSIStatusBlock);
-}
-
-/** Waits until the attached device is ready to accept data following a CBW, checking
- *  to ensure that the device has not stalled the transaction.
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
- */
-static uint8_t MassStore_WaitForDataReceived(void)
-{
-	uint16_t TimeoutMSRem        = COMMAND_DATA_TIMEOUT_MS;
-	uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber();
-
-	/* Select the IN data pipe for data reception */
-	Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
-	Pipe_Unfreeze();
-
-	/* Wait until data received in the IN pipe */
-	while (!(Pipe_IsINReceived()))
-	{
-		uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber();
-
-		/* Check to see if a new frame has been issued (1ms elapsed) */
-		if (CurrentFrameNumber != PreviousFrameNumber)
-		{
-			/* Save the new frame number and decrement the timeout period */
-			PreviousFrameNumber = CurrentFrameNumber;
-			TimeoutMSRem--;
-
-			/* Check to see if the timeout period for the command has elapsed */
-			if (!(TimeoutMSRem))
-			  return PIPE_RWSTREAM_Timeout;
-		}
-
-		Pipe_Freeze();
-		Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
-		Pipe_Unfreeze();
-
-		/* Check if pipe stalled (command failed by device) */
-		if (Pipe_IsStalled())
-		{
-			/* Clear the stall condition on the OUT pipe */
-			USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress());
-
-			return PIPE_RWSTREAM_PipeStalled;
-		}
-
-		Pipe_Freeze();
-		Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
-		Pipe_Unfreeze();
-
-		/* Check if pipe stalled (command failed by device) */
-		if (Pipe_IsStalled())
-		{
-			/* Clear the stall condition on the IN pipe */
-			USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress());
-
-			return PIPE_RWSTREAM_PipeStalled;
-		}
-
-		/* Check to see if the device was disconnected, if so exit function */
-		if (USB_HostState == HOST_STATE_Unattached)
-		  return PIPE_RWSTREAM_DeviceDisconnected;
-	};
-
-	Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
-	Pipe_Freeze();
-
-	Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
-	Pipe_Freeze();
-
-	return PIPE_RWSTREAM_NoError;
-}
-
-/** Sends or receives the transaction's data stage to or from the attached device, reading or
- *  writing to the nominated buffer.
- *
- *  \param[in] SCSICommandBlock  Pointer to a SCSI command block structure being sent to the attached device
- *  \param[in,out]  BufferPtr    Pointer to the data buffer to read from or write to
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
- */
-static uint8_t MassStore_SendReceiveData(MS_CommandBlockWrapper_t* const SCSICommandBlock,
-                                         void* BufferPtr)
-{
-	uint8_t  ErrorCode = PIPE_RWSTREAM_NoError;
-	uint16_t BytesRem  = SCSICommandBlock->DataTransferLength;
-
-	/* Check the direction of the SCSI command data stage */
-	if (SCSICommandBlock->Flags & MS_COMMAND_DIR_DATA_IN)
-	{
-		/* Wait until the device has replied with some data */
-		if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
-		  return ErrorCode;
-
-		/* Select the IN data pipe for data reception */
-		Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
-		Pipe_Unfreeze();
-
-		/* Read in the block data from the pipe */
-		if ((ErrorCode = Pipe_Read_Stream_LE(BufferPtr, BytesRem, NULL)) != PIPE_RWSTREAM_NoError)
-		  return ErrorCode;
-
-		/* Acknowledge the packet */
-		Pipe_ClearIN();
-	}
-	else
-	{
-		/* Select the OUT data pipe for data transmission */
-		Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
-		Pipe_Unfreeze();
-
-		/* Write the block data to the pipe */
-		if ((ErrorCode = Pipe_Write_Stream_LE(BufferPtr, BytesRem, NULL)) != PIPE_RWSTREAM_NoError)
-		  return ErrorCode;
-
-		/* Acknowledge the packet */
-		Pipe_ClearOUT();
-
-		while (!(Pipe_IsOUTReady()))
-		{
-			if (USB_HostState == HOST_STATE_Unattached)
-			  return PIPE_RWSTREAM_DeviceDisconnected;
-		}
-	}
-
-	/* Freeze used pipe after use */
-	Pipe_Freeze();
-
-	return PIPE_RWSTREAM_NoError;
-}
-
-/** Routine to receive the current CSW from the device.
- *
- *  \param[out] SCSICommandStatus  Pointer to a destination where the returned status data should be stored
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
- */
-static uint8_t MassStore_GetReturnedStatus(MS_CommandStatusWrapper_t* const SCSICommandStatus)
-{
-	uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
-
-	/* If an error in the command occurred, abort */
-	if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError)
-	  return ErrorCode;
-
-	/* Select the IN data pipe for data reception */
-	Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
-	Pipe_Unfreeze();
-
-	/* Load in the CSW from the attached device */
-	if ((ErrorCode = Pipe_Read_Stream_LE(SCSICommandStatus, sizeof(MS_CommandStatusWrapper_t), NULL)) !=
-	                                     PIPE_RWSTREAM_NoError)
-	{
-		return ErrorCode;
-	}
-
-	/* Clear the data ready for next reception */
-	Pipe_ClearIN();
-
-	/* Freeze the IN pipe after use */
-	Pipe_Freeze();
-
-	/* Check to see if command failed */
-	if (SCSICommandStatus->Status != MS_SCSI_COMMAND_Pass)
-	  ErrorCode = MASS_STORE_SCSI_COMMAND_FAILED;
-
-	return ErrorCode;
-}
-
-/** Issues a Mass Storage class specific request to reset the attached device's Mass Storage interface,
- *  readying the device for the next CBW. The Data endpoints are cleared of any STALL condition once this
- *  command completes successfully.
- *
- *  \return A value from the USB_Host_SendControlErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
- */
-uint8_t MassStore_MassStorageReset(void)
-{
-	uint8_t ErrorCode;
-
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
-			.bRequest      = MS_REQ_MassStorageReset,
-			.wValue        = 0,
-			.wIndex        = 0,
-			.wLength       = 0,
-		};
-
-	/* Select the control pipe for the request transfer */
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
-	  return ErrorCode;
-
-	/* Select first data pipe to clear STALL condition if one exists */
-	Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE);
-
-	if ((ErrorCode = USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress())) != HOST_SENDCONTROL_Successful)
-	  return ErrorCode;
-
-	/* Select second data pipe to clear STALL condition if one exists */
-	Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE);
-
-	if ((ErrorCode = USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress())) != HOST_SENDCONTROL_Successful)
-	  return ErrorCode;
-
-	return HOST_SENDCONTROL_Successful;
-}
-
-/** Issues a Mass Storage class specific request to determine the index of the highest numbered Logical
- *  Unit in the attached device.
- *
- *  \note Some devices do not support this request, and will STALL it when issued. To get around this,
- *        on unsupported devices the max LUN index will be reported as zero and no error will be returned
- *        if the device STALLs the request.
- *
- *  \param[out] MaxLUNIndex  Pointer to the location that the maximum LUN index value should be stored
- *
- *  \return A value from the USB_Host_SendControlErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
- */
-uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex)
-{
-	uint8_t ErrorCode;
-
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
-			.bRequest      = MS_REQ_GetMaxLUN,
-			.wValue        = 0,
-			.wIndex        = 0,
-			.wLength       = 1,
-		};
-
-	/* Select the control pipe for the request transfer */
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	if ((ErrorCode = USB_Host_SendControlRequest(MaxLUNIndex)) == HOST_SENDCONTROL_SetupStalled)
-	{
-		/* Clear the pipe stall */
-		Pipe_ClearStall();
-
-		/* Some faulty Mass Storage devices don't implement the GET_MAX_LUN request, so assume a single LUN */
-		*MaxLUNIndex = 0;
-
-		/* Clear the error, and pretend the request executed correctly if the device STALLed it */
-		ErrorCode = HOST_SENDCONTROL_Successful;
-	}
-
-	return ErrorCode;
-}
-
-/** Issues a SCSI Inquiry command to the attached device, to determine the device's information. This
- *  gives information on the device's capabilities.
- *
- *  \param[in] LUNIndex    Index of the LUN inside the device the command is being addressed to
- *  \param[out] InquiryPtr  Pointer to the inquiry data structure where the inquiry data from the device is to be stored
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
- */
-uint8_t MassStore_Inquiry(const uint8_t LUNIndex,
-                          SCSI_Inquiry_Response_t* const InquiryPtr)
-{
-	/* Create a CBW with a SCSI command to issue INQUIRY command */
-	MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
-		{
-			.Signature          = MS_CBW_SIGNATURE,
-			.DataTransferLength = sizeof(SCSI_Inquiry_Response_t),
-			.Flags              = MS_COMMAND_DIR_DATA_IN,
-			.LUN                = LUNIndex,
-			.SCSICommandLength  = 6,
-			.SCSICommandData    =
-				{
-					SCSI_CMD_INQUIRY,
-					0x00,                   // Reserved
-					0x00,                   // Reserved
-					0x00,                   // Reserved
-					sizeof(SCSI_Inquiry_Response_t), // Allocation Length
-					0x00                    // Unused (control)
-				}
-		};
-
-	/* Send the command and any data to the attached device */
-	return MassStore_SendCommand(&SCSICommandBlock, InquiryPtr);
-}
-
-/** Issues a SCSI Request Sense command to the attached device, to determine the current SCSI sense information. This
- *  gives error codes for the last issued SCSI command to the device.
- *
- *  \param[in] LUNIndex   Index of the LUN inside the device the command is being addressed to
- *  \param[out] SensePtr  Pointer to the sense data structure where the sense data from the device is to be stored
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
- */
-uint8_t MassStore_RequestSense(const uint8_t LUNIndex,
-                               SCSI_Request_Sense_Response_t* const SensePtr)
-{
-	/* Create a CBW with a SCSI command to issue REQUEST SENSE command */
-	MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
-		{
-			.Signature          = MS_CBW_SIGNATURE,
-			.DataTransferLength = sizeof(SCSI_Request_Sense_Response_t),
-			.Flags              = MS_COMMAND_DIR_DATA_IN,
-			.LUN                = LUNIndex,
-			.SCSICommandLength  = 6,
-			.SCSICommandData =
-				{
-					SCSI_CMD_REQUEST_SENSE,
-					0x00,                   // Reserved
-					0x00,                   // Reserved
-					0x00,                   // Reserved
-					sizeof(SCSI_Request_Sense_Response_t), // Allocation Length
-					0x00                    // Unused (control)
-				}
-		};
-
-	/* Send the command and any data to the attached device */
-	return MassStore_SendCommand(&SCSICommandBlock, SensePtr);
-}
-
-/** Issues a SCSI Device Block Read command to the attached device, to read in one or more data blocks from the
- *  storage medium into a buffer.
- *
- *  \param[in] LUNIndex      Index of the LUN inside the device the command is being addressed to
- *  \param[in] BlockAddress  Start block address to read from
- *  \param[in] Blocks        Number of blocks to read from the device
- *  \param[in] BlockSize     Size in bytes of each block to read
- *  \param[out] BufferPtr    Pointer to the buffer where the read data is to be written to
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
- */
-uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex,
-                                  const uint32_t BlockAddress,
-                                  const uint8_t Blocks,
-                                  const uint16_t BlockSize,
-                                  void* BufferPtr)
-{
-	/* Create a CBW with a SCSI command to read in the given blocks from the device */
-	MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
-		{
-			.Signature          = MS_CBW_SIGNATURE,
-			.DataTransferLength = ((uint32_t)Blocks * BlockSize),
-			.Flags              = MS_COMMAND_DIR_DATA_IN,
-			.LUN                = LUNIndex,
-			.SCSICommandLength  = 10,
-			.SCSICommandData    =
-				{
-					SCSI_CMD_READ_10,
-					0x00,                   // Unused (control bits, all off)
-					(BlockAddress >> 24),   // MSB of Block Address
-					(BlockAddress >> 16),
-					(BlockAddress >> 8),
-					(BlockAddress & 0xFF),  // LSB of Block Address
-					0x00,                   // Reserved
-					0x00,                   // MSB of Total Blocks to Read
-					Blocks,                 // LSB of Total Blocks to Read
-					0x00                    // Unused (control)
-				}
-		};
-
-	/* Send the command and any data to the attached device */
-	return MassStore_SendCommand(&SCSICommandBlock, BufferPtr);
-}
-
-/** Issues a SCSI Device Block Write command to the attached device, to write one or more data blocks to the
- *  storage medium from a buffer.
- *
- *  \param[in] LUNIndex      Index of the LUN inside the device the command is being addressed to
- *  \param[in] BlockAddress  Start block address to write to
- *  \param[in] Blocks        Number of blocks to write to in the device
- *  \param[in] BlockSize     Size in bytes of each block to write
- *  \param[in] BufferPtr     Pointer to the buffer where the write data is to be sourced from
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
- */
-uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex,
-                                   const uint32_t BlockAddress,
-                                   const uint8_t Blocks,
-                                   const uint16_t BlockSize,
-                                   void* BufferPtr)
-{
-	/* Create a CBW with a SCSI command to write the given blocks to the device */
-	MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
-		{
-			.Signature          = MS_CBW_SIGNATURE,
-			.DataTransferLength = ((uint32_t)Blocks * BlockSize),
-			.Flags              = MS_COMMAND_DIR_DATA_OUT,
-			.LUN                = LUNIndex,
-			.SCSICommandLength  = 10,
-			.SCSICommandData    =
-				{
-					SCSI_CMD_WRITE_10,
-					0x00,                   // Unused (control bits, all off)
-					(BlockAddress >> 24),   // MSB of Block Address
-					(BlockAddress >> 16),
-					(BlockAddress >> 8),
-					(BlockAddress & 0xFF),  // LSB of Block Address
-					0x00,                   // Unused (reserved)
-					0x00,                   // MSB of Total Blocks to Write
-					Blocks,                 // LSB of Total Blocks to Write
-					0x00                    // Unused (control)
-				}
-		};
-
-	/* Send the command and any data to the attached device */
-	return MassStore_SendCommand(&SCSICommandBlock, BufferPtr);
-}
-
-/** Issues a SCSI Device Test Unit Ready command to the attached device, to determine if the device is ready to accept
- *  other commands.
- *
- *  \param[in] LUNIndex      Index of the LUN inside the device the command is being addressed to
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
- */
-uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex)
-{
-	/* Create a CBW with a SCSI command to issue TEST UNIT READY command */
-	MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
-		{
-			.Signature          = MS_CBW_SIGNATURE,
-			.DataTransferLength = 0,
-			.Flags              = MS_COMMAND_DIR_DATA_IN,
-			.LUN                = LUNIndex,
-			.SCSICommandLength  = 6,
-			.SCSICommandData    =
-				{
-					SCSI_CMD_TEST_UNIT_READY,
-					0x00,                   // Reserved
-					0x00,                   // Reserved
-					0x00,                   // Reserved
-					0x00,                   // Reserved
-					0x00                    // Unused (control)
-				}
-		};
-
-	/* Send the command and any data to the attached device */
-	return MassStore_SendCommand(&SCSICommandBlock, NULL);
-}
-
-/** Issues a SCSI Device Read Capacity command to the attached device, to determine the capacity of the
- *  given Logical Unit within the device.
- *
- *  \param[in] LUNIndex      Index of the LUN inside the device the command is being addressed to
- *  \param[out] CapacityPtr  Device capacity structure where the capacity data is to be stored
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
- */
-uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex,
-                               SCSI_Capacity_t* const CapacityPtr)
-{
-	uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
-
-	/* Create a CBW with a SCSI command to issue READ CAPACITY command */
-	MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
-		{
-			.Signature          = MS_CBW_SIGNATURE,
-			.DataTransferLength = sizeof(SCSI_Capacity_t),
-			.Flags              = MS_COMMAND_DIR_DATA_IN,
-			.LUN                = LUNIndex,
-			.SCSICommandLength  = 10,
-			.SCSICommandData    =
-				{
-					SCSI_CMD_READ_CAPACITY_10,
-					0x00,                   // Reserved
-					0x00,                   // MSB of Logical block address
-					0x00,
-					0x00,
-					0x00,                   // LSB of Logical block address
-					0x00,                   // Reserved
-					0x00,                   // Reserved
-					0x00,                   // Partial Medium Indicator
-					0x00                    // Unused (control)
-				}
-		};
-
-	/* Send the command and any data to the attached device */
-	if ((ErrorCode = MassStore_SendCommand(&SCSICommandBlock, CapacityPtr)) != PIPE_RWSTREAM_NoError)
-	  return ErrorCode;
-
-	/* Endian-correct the read data */
-	CapacityPtr->Blocks    = SwapEndian_32(CapacityPtr->Blocks);
-	CapacityPtr->BlockSize = SwapEndian_32(CapacityPtr->BlockSize);
-
-	return ErrorCode;
-}
-
-/** Issues a SCSI Device Prevent/Allow Medium Removal command to the attached device, to lock the physical media from
- *  being removed. This is a legacy command for SCSI disks with removable storage (such as ZIP disks), but should still
- *  be issued before the first read or write command is sent.
- *
- *  \param[in] LUNIndex        Index of the LUN inside the device the command is being addressed to
- *  \param[in] PreventRemoval  Whether or not the LUN media should be locked to prevent removal or not
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum, or MASS_STORE_SCSI_COMMAND_FAILED if the SCSI command fails
- */
-uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex,
-                                            const bool PreventRemoval)
-{
-	/* Create a CBW with a SCSI command to issue PREVENT ALLOW MEDIUM REMOVAL command */
-	MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
-		{
-			.Signature          = MS_CBW_SIGNATURE,
-			.DataTransferLength = 0,
-			.Flags              = MS_COMMAND_DIR_DATA_OUT,
-			.LUN                = LUNIndex,
-			.SCSICommandLength  = 6,
-			.SCSICommandData    =
-				{
-					SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL,
-					0x00,                   // Reserved
-					0x00,                   // Reserved
-					PreventRemoval,         // Prevent flag
-					0x00,                   // Reserved
-					0x00                    // Unused (control)
-				}
-		};
-
-	/* Send the command and any data to the attached device */
-	return MassStore_SendCommand(&SCSICommandBlock, NULL);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.h
deleted file mode 100644
index 1d3372da5b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MassStoreCommands.c.
- */
-
-#ifndef _MASS_STORE_COMMANDS_H_
-#define _MASS_STORE_COMMANDS_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-
-		#include "../MassStorageHost.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Macros: */
-		/** Timeout period between the issuing of a CBW to a device, and the reception of the first packet. */
-		#define COMMAND_DATA_TIMEOUT_MS             10000
-
-		/** Additional error code for Mass Storage functions when a device returns a logical command failure. */
-		#define MASS_STORE_SCSI_COMMAND_FAILED      0xC0
-
-	/* Function Prototypes: */
-		#if defined(INCLUDE_FROM_MASSSTORE_COMMANDS_C)
-			static uint8_t MassStore_SendCommand(MS_CommandBlockWrapper_t* const SCSICommandBlock,
-			                                     void* BufferPtr);
-			static uint8_t MassStore_WaitForDataReceived(void);
-			static uint8_t MassStore_SendReceiveData(MS_CommandBlockWrapper_t* const SCSICommandBlock,
-			                                         void* BufferPtr) ATTR_NON_NULL_PTR_ARG(1);
-			static uint8_t MassStore_GetReturnedStatus(MS_CommandStatusWrapper_t* const SCSICommandStatus) ATTR_NON_NULL_PTR_ARG(1);
-		#endif
-
-		uint8_t MassStore_MassStorageReset(void);
-		uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex);
-		uint8_t MassStore_RequestSense(const uint8_t LUNIndex,
-		                               SCSI_Request_Sense_Response_t* const SensePtr) ATTR_NON_NULL_PTR_ARG(2);
-		uint8_t MassStore_Inquiry(const uint8_t LUNIndex,
-		                          SCSI_Inquiry_Response_t* const InquiryPtr) ATTR_NON_NULL_PTR_ARG(2);
-		uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex,
-		                                  const uint32_t BlockAddress,
-		                                  const uint8_t Blocks,
-		                                  const uint16_t BlockSize,
-		                                  void* BufferPtr) ATTR_NON_NULL_PTR_ARG(5);
-		uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex,
-		                                   const uint32_t BlockAddress,
-                                           const uint8_t Blocks,
-		                                   const uint16_t BlockSize,
-		                                   void* BufferPtr) ATTR_NON_NULL_PTR_ARG(5);
-		uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex,
-		                               SCSI_Capacity_t* const CapacityPtr) ATTR_NON_NULL_PTR_ARG(2);
-		uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex);
-		uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex,
-		                                            const bool PreventRemoval);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.c
deleted file mode 100644
index 2361ab5610..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MassStorageHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "MassStorageHost.h"
-
-/** Index of the highest available LUN (Logical Unit) in the attached Mass Storage Device */
-uint8_t MassStore_MaxLUNIndex;
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Mass Storage Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		MassStorageHost_Task();
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	Buttons_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	uint8_t ErrorCode;
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	puts_P(PSTR("Mass Storage Disk Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Task to set the configuration of the attached device after it has been enumerated, and to read in blocks from
- *  the device and print them to the serial port.
- */
-void MassStorageHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	/* Indicate device busy via the status LEDs */
-	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-	uint8_t ErrorCode;
-
-	/* Send the request, display error and wait for device detach if request fails */
-	if ((ErrorCode = MassStore_GetMaxLUN(&MassStore_MaxLUNIndex)) != HOST_SENDCONTROL_Successful)
-	{
-		ShowDiskReadError(PSTR("Get Max LUN"), ErrorCode);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Print number of LUNs detected in the attached device */
-	printf_P(PSTR("Total LUNs: %d - Using first LUN in device.\r\n"), (MassStore_MaxLUNIndex + 1));
-
-	/* Reset the Mass Storage device interface, ready for use */
-	if ((ErrorCode = MassStore_MassStorageReset()) != HOST_SENDCONTROL_Successful)
-	{
-		ShowDiskReadError(PSTR("Mass Storage Reset"), ErrorCode);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Get sense data from the device - many devices will not accept any other commands until the sense data
-	 * is read - both on start-up and after a failed command */
-	SCSI_Request_Sense_Response_t SenseData;
-	if ((ErrorCode = MassStore_RequestSense(0, &SenseData)) != 0)
-	{
-		ShowDiskReadError(PSTR("Request Sense"), ErrorCode);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Set the prevent removal flag for the device, allowing it to be accessed */
-	if ((ErrorCode = MassStore_PreventAllowMediumRemoval(0, true)) != 0)
-	{
-		ShowDiskReadError(PSTR("Prevent/Allow Medium Removal"), ErrorCode);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Get inquiry data from the device */
-	SCSI_Inquiry_Response_t InquiryData;
-	if ((ErrorCode = MassStore_Inquiry(0, &InquiryData)) != 0)
-	{
-		ShowDiskReadError(PSTR("Inquiry"), ErrorCode);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Print vendor and product names of attached device */
-	printf_P(PSTR("Vendor \"%.8s\", Product \"%.16s\"\r\n"), InquiryData.VendorID, InquiryData.ProductID);
-
-	/* Wait until disk ready */
-	puts_P(PSTR("Waiting until ready.."));
-
-	for (;;)
-	{
-		Serial_SendByte('.');
-
-		/* Abort if device removed */
-		if (USB_HostState == HOST_STATE_Unattached)
-		  break;
-
-		/* Check to see if the attached device is ready for new commands */
-		ErrorCode = MassStore_TestUnitReady(0);
-
-		/* If attached device is ready, abort the loop */
-		if (!(ErrorCode))
-		  break;
-
-		/* If an error other than a logical command failure (indicating device busy) returned, abort */
-		if (ErrorCode != MASS_STORE_SCSI_COMMAND_FAILED)
-		{
-			ShowDiskReadError(PSTR("Test Unit Ready"), ErrorCode);
-			USB_Host_SetDeviceConfiguration(0);
-			return;
-		}
-	}
-
-	puts_P(PSTR("\r\nRetrieving Capacity... "));
-
-	/* Create new structure for the disk's capacity in blocks and block size */
-	SCSI_Capacity_t DiskCapacity;
-
-	/* Retrieve disk capacity */
-	if ((ErrorCode = MassStore_ReadCapacity(0, &DiskCapacity)) != 0)
-	{
-		ShowDiskReadError(PSTR("Read Capacity"), ErrorCode);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Display the disk capacity in blocks * block size bytes */
-	printf_P(PSTR("%lu blocks of %lu bytes.\r\n"), DiskCapacity.Blocks, DiskCapacity.BlockSize);
-
-	/* Create a new buffer capable of holding a single block from the device */
-	uint8_t BlockBuffer[DiskCapacity.BlockSize];
-
-	/* Read in the first 512 byte block from the device */
-	if ((ErrorCode = MassStore_ReadDeviceBlock(0, 0x00000000, 1, DiskCapacity.BlockSize, BlockBuffer)) != 0)
-	{
-		ShowDiskReadError(PSTR("Read Device Block"), ErrorCode);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("\r\nContents of first block:\r\n"));
-
-	/* Print out the first block in both HEX and ASCII, 16 bytes per line */
-	for (uint16_t Chunk = 0; Chunk < (DiskCapacity.BlockSize >> 4); Chunk++)
-	{
-		/* Pointer to the start of the current 16-byte chunk in the read block of data */
-		uint8_t* ChunkPtr = &BlockBuffer[Chunk << 4];
-
-		/* Print out the 16 bytes of the chunk in HEX format */
-		for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
-		{
-			char CurrByte = *(ChunkPtr + ByteOffset);
-
-			printf_P(PSTR("%.2X "), CurrByte);
-		}
-
-		puts_P(PSTR("    "));
-
-		/* Print out the 16 bytes of the chunk in ASCII format */
-		for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++)
-		{
-			char CurrByte = *(ChunkPtr + ByteOffset);
-
-			putchar(isprint(CurrByte) ? CurrByte : '.');
-		}
-
-		puts_P(PSTR("\r\n"));
-	}
-
-	puts_P(PSTR("\r\n\r\nPress board button to read entire ASCII contents of disk...\r\n\r\n"));
-
-	/* Wait for the board button to be pressed */
-	while (!(Buttons_GetStatus() & BUTTONS_BUTTON1))
-	{
-		/* Abort if device removed */
-		if (USB_HostState == HOST_STATE_Unattached)
-		  return;
-	}
-
-	/* Print out the entire disk contents in ASCII format */
-	for (uint32_t CurrBlockAddress = 0; CurrBlockAddress < DiskCapacity.Blocks; CurrBlockAddress++)
-	{
-		/* Read in the next block of data from the device */
-		if ((ErrorCode = MassStore_ReadDeviceBlock(0, CurrBlockAddress, 1, DiskCapacity.BlockSize, BlockBuffer)) != 0)
-		{
-			ShowDiskReadError(PSTR("Read Device Block"), ErrorCode);
-			USB_Host_SetDeviceConfiguration(0);
-			return;
-		}
-
-		/* Send the ASCII data in the read in block to the serial port */
-		for (uint16_t Byte = 0; Byte < DiskCapacity.BlockSize; Byte++)
-		{
-			char CurrByte = BlockBuffer[Byte];
-
-			putchar(isprint(CurrByte) ? CurrByte : '.');
-		}
-	}
-
-	/* Indicate device no longer busy */
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	USB_Host_SetDeviceConfiguration(0);
-}
-
-/** Indicates that a communication error has occurred with the attached Mass Storage Device,
- *  printing error codes to the serial port and waiting until the device is removed before
- *  continuing.
- *
- *  \param[in] CommandString  ASCII string located in PROGMEM space indicating what operation failed
- *  \param[in] ErrorCode      Error code of the function which failed to complete successfully
- */
-void ShowDiskReadError(const char* CommandString,
-                       const uint8_t ErrorCode)
-{
-	if (ErrorCode == MASS_STORE_SCSI_COMMAND_FAILED)
-	{
-		/* Display the error code */
-		printf_P(PSTR(ESC_FG_RED "SCSI command error (%S).\r\n"), CommandString);
-	}
-	else
-	{
-		/* Display the error code */
-		printf_P(PSTR(ESC_FG_RED "Command error (%S).\r\n"), CommandString);
-		printf_P(PSTR("  -- Error Code: %d" ESC_FG_WHITE), ErrorCode);
-	}
-
-	Pipe_Freeze();
-
-	/* Indicate device error via the status LEDs */
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h
deleted file mode 100644
index 58b2bf7bfc..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MassStoreHost.c.
- */
-
-#ifndef _MASS_STORE_HOST_H_
-#define _MASS_STORE_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-		#include <ctype.h>
-		#include <string.h>
-
-		#include "ConfigDescriptor.h"
-
-		#include "Lib/MassStoreCommands.h"
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY          LEDS_LED2
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void MassStorageHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-		void ShowDiskReadError(const char* CommandString,
-		                       const uint8_t ErrorCode);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt
deleted file mode 100644
index 4b07261c4f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Mass Storage Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Mass Storage Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Bulk Only</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Mass Storage Standard \n
- *        USB Bulk-Only Transport Standard \n
- *        SCSI Primary Commands Specification \n
- *        SCSI Block Commands Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Mass Storage host demonstration application. This gives a simple reference
- *  application for implementing a USB Mass Storage host, for USB storage devices
- *  using the standard Mass Storage USB profile.
- *
- *  The first 512 bytes (boot sector) of an attached disk's memory will be dumped
- *  out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287
- *  AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents
- *  of the disk will be dumped to the serial port.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/asf.xml
deleted file mode 100644
index 8f04f692e8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/asf.xml
+++ /dev/null
@@ -1,53 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Mass Storage Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.ms.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.ms"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.ms" caption="Mass Storage Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Mass Storage Host demo, capable of reading and writing raw 512 byte segments to the device's serial port. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="Mass Storage Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MassStorageHost.txt"/>

-

-		<build type="c-source" value="MassStorageHost.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="header-file" value="MassStorageHost.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-

-		<build type="c-source" value="Lib/MassStoreCommands.c"/>

-		<build type="header-file" value="Lib/MassStoreCommands.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/doxyfile
deleted file mode 100644
index 21c9814c91..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Mass Storage Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/makefile
deleted file mode 100644
index 32470cb46d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MassStorageHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MassStorageHost
-SRC          = $(TARGET).c ConfigDescriptor.c Lib/MassStoreCommands.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c
deleted file mode 100644
index b6365cc99c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a HID interface descriptor containing at least one Interrupt type IN endpoint.
- *
- *  \return An error code from the \ref MouseHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* HIDInterface   = NULL;
-	USB_Descriptor_Endpoint_t*  DataINEndpoint = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataINEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(HIDInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextMouseInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Get the next HID interface from the configuration descriptor */
-			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-										  DComp_NextMouseInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Descriptor not found, error out */
-				return NoCompatibleInterfaceFound;
-			}
-
-			/* Save the interface in case we need to refer back to it later */
-			HIDInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* If the endpoint is a IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		  DataINEndpoint = EndpointData;
-	}
-
-	/* Configure the HID data IN pipe */
-	Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-	Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS);
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct Mouse HID Class and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextMouseInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	/* Determine if the current descriptor is an interface descriptor */
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the HID descriptor class and protocol, break out if correct class/protocol interface found */
-		if ((Interface->Class    == HID_CSCP_HIDClass) &&
-		    (Interface->Protocol == HID_CSCP_MouseBootProtocol))
-		{
-			/* Indicate that the descriptor being searched for has been found */
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	/* Current descriptor does not match what this comparator is looking for */
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Endpoint descriptor inside the current interface descriptor, aborting the
- *  search if another interface descriptor is found before the required endpoint.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextMouseInterfaceDataEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	/* Determine the type of the current descriptor */
-	if (Header->Type == DTYPE_Endpoint)
-	  return DESCRIPTOR_SEARCH_Found;
-	else if (Header->Type == DTYPE_Interface)
-	  return DESCRIPTOR_SEARCH_Fail;
-	else
-	  return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h
deleted file mode 100644
index fa3cafbadf..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "MouseHost.h"
-
-	/* Macros: */
-		/** Pipe address for the mouse data IN pipe. */
-		#define MOUSE_DATA_IN_PIPE          (PIPE_DIR_IN | 1)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum MouseHost_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextMouseInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextMouseInterfaceDataEndpoint(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/MouseHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/MouseHost.c
deleted file mode 100644
index e8685465d3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/MouseHost.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MouseHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "MouseHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Mouse HID Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		MouseHost_Task();
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	uint8_t ErrorCode;
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* HID class request to set the mouse protocol to the Boot Protocol */
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
-			.bRequest      = HID_REQ_SetProtocol,
-			.wValue        = 0,
-			.wIndex        = 0,
-			.wLength       = 0,
-		};
-
-	/* Select the control pipe for the request transfer */
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	/* Send the request, display error and wait for device detach if request fails */
-	if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Protocol).\r\n"
-								 " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Mouse Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Reads in and processes the next report from the attached device, displaying the report
- *  contents on the board LEDs and via the serial port.
- */
-void MouseHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	USB_MouseReport_Data_t MouseReport;
-	uint8_t                LEDMask = LEDS_NO_LEDS;
-
-	/* Select mouse data pipe */
-	Pipe_SelectPipe(MOUSE_DATA_IN_PIPE);
-
-	/* Unfreeze mouse data pipe */
-	Pipe_Unfreeze();
-
-	/* Check to see if a packet has been received */
-	if (!(Pipe_IsINReceived()))
-	{
-		/* No packet received (no movement), turn off LEDs */
-		LEDs_SetAllLEDs(LEDS_NO_LEDS);
-
-		/* Refreeze HID data IN pipe */
-		Pipe_Freeze();
-
-		return;
-	}
-
-	/* Ensure pipe contains data before trying to read from it */
-	if (Pipe_IsReadWriteAllowed())
-	{
-		/* Read in mouse report data */
-		Pipe_Read_Stream_LE(&MouseReport, sizeof(MouseReport), NULL);
-
-		/* Alter status LEDs according to mouse X movement */
-		if (MouseReport.X > 0)
-		  LEDMask |= LEDS_LED1;
-		else if (MouseReport.X < 0)
-		  LEDMask |= LEDS_LED2;
-
-		/* Alter status LEDs according to mouse Y movement */
-		if (MouseReport.Y > 0)
-		  LEDMask |= LEDS_LED3;
-		else if (MouseReport.Y < 0)
-		  LEDMask |= LEDS_LED4;
-
-		/* Alter status LEDs according to mouse button position */
-		if (MouseReport.Button)
-		  LEDMask  = LEDS_ALL_LEDS;
-
-		LEDs_SetAllLEDs(LEDMask);
-
-		/* Print mouse report data through the serial port */
-		printf_P(PSTR("dX:%2d dY:%2d Button:%d\r\n"), MouseReport.X,
-													  MouseReport.Y,
-													  MouseReport.Button);
-	}
-
-	/* Clear the IN endpoint, ready for next data packet */
-	Pipe_ClearIN();
-
-	/* Refreeze mouse data pipe */
-	Pipe_Freeze();
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/MouseHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/MouseHost.h
deleted file mode 100644
index fc0ddb5129..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/MouseHost.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MouseHost.c.
- */
-
-#ifndef _MOUSE_HOST_H_
-#define _MOUSE_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/interrupt.h>
-		#include <avr/power.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "ConfigDescriptor.h"
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void MouseHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-		void ReadNextReport(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/MouseHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/MouseHost.txt
deleted file mode 100644
index 29364537b2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/MouseHost.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Mouse Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Mouse host demonstration application. This gives a simple reference
- *  application for implementing a USB Mouse host, for USB mice using
- *  the standard mouse HID profile.
- *
- *  Mouse movement and button presses are displayed on the board LEDs,
- *  as well as printed out the serial terminal as formatted dY, dY and
- *  button status information.
- *
- *  This uses a naive method where the mouse is set to Boot Protocol mode, so
- *  that the report structure is fixed and known. A better implementation
- *  uses the HID report parser for correct report data processing across
- *  all compatible mice with advanced characteristics, as shown in the
- *  MouseHostWithParser demo application.
- *
- *  Currently only single interface mice are supported.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/asf.xml
deleted file mode 100644
index 4499986b39..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/asf.xml
+++ /dev/null
@@ -1,50 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Mouse HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.mouse.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.mouse"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.mouse" caption="Mouse HID Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Keyboard HID Host demo, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MouseHost.txt"/>

-

-		<build type="c-source" value="MouseHost.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="header-file" value="MouseHost.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/doxyfile
deleted file mode 100644
index 41adfaf056..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Mouse Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/makefile
deleted file mode 100644
index a3622045e1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MouseHost
-SRC          = $(TARGET).c ConfigDescriptor.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c
deleted file mode 100644
index ef06f956b1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a HID interface descriptor containing at least one Interrupt type IN endpoint and HID descriptor.
- *
- *  \return An error code from the \ref MouseHostWithParser_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* HIDInterface   = NULL;
-	USB_HID_Descriptor_HID_t*   HIDDescriptor  = NULL;
-	USB_Descriptor_Endpoint_t*  DataINEndpoint = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataINEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(HIDInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextMouseInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Get the next HID interface from the configuration descriptor */
-			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-										  DComp_NextMouseInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Descriptor not found, error out */
-				return NoCompatibleInterfaceFound;
-			}
-
-			/* Save the interface in case we need to refer back to it later */
-			HIDInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-			/* Get the HID descriptor from the configuration descriptor */
-			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-										  DComp_NextHID) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Descriptor not found, error out */
-				return NoCompatibleInterfaceFound;
-			}
-
-			/* Save the HID descriptor for later use */
-			HIDDescriptor = DESCRIPTOR_PCAST(CurrConfigLocation, USB_HID_Descriptor_HID_t);
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* If the endpoint is a IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		  DataINEndpoint = EndpointData;
-	}
-
-	/* Configure the HID data IN pipe */
-	Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-	Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS);
-
-	/* Get the HID report size from the HID report descriptor */
-	HIDReportSize = HIDDescriptor->HIDReportLength;
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct Mouse HID Class and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextMouseInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the HID descriptor class, break out if correct class interface found */
-		if (Interface->Class == HID_CSCP_HIDClass)
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Endpoint descriptor inside the current interface descriptor, aborting the
- *  search if another interface descriptor is found before the required endpoint.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextMouseInterfaceDataEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Endpoint)
-	  return DESCRIPTOR_SEARCH_Found;
-	else if (Header->Type == DTYPE_Interface)
-	  return DESCRIPTOR_SEARCH_Fail;
-	else
-	  return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next HID descriptor within the current HID interface descriptor.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextHID(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == HID_DTYPE_HID)
-	  return DESCRIPTOR_SEARCH_Found;
-	else
-	  return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h
deleted file mode 100644
index 4393c9b384..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "HIDReport.h"
-
-	/* Macros: */
-		/** Pipe address for the mouse report data IN pipe. */
-		#define MOUSE_DATA_IN_PIPE          (ENDPOINT_DIR_IN | 1)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum MouseHostWithParser_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextMouseInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextMouseInterfaceDataEndpoint(void* CurrentDescriptor);
-		uint8_t DComp_NextHID(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.c
deleted file mode 100644
index 0c90f7a3ee..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-#include "HIDReport.h"
-
-/** Size in bytes of the attached device's HID report descriptor */
-uint16_t         HIDReportSize;
-
-/** Processed HID report descriptor items structure, containing information on each HID report element */
-HID_ReportInfo_t HIDReportInfo;
-
-
-/** Function to read in the HID report descriptor from the attached device, and process it into easy-to-read
- *  structures via the HID parser routines in the LUFA library.
- *
- *  \return  A value from the \ref MouseHostWithParser_GetHIDReportDataCodes_t enum
- */
-uint8_t GetHIDReportData(void)
-{
-	/* Create a buffer big enough to hold the entire returned HID report */
-	uint8_t HIDReportData[HIDReportSize];
-
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE),
-			.bRequest      = REQ_GetDescriptor,
-			.wValue        = (HID_DTYPE_Report << 8),
-			.wIndex        = 0,
-			.wLength       = HIDReportSize,
-		};
-
-	/* Select the control pipe for the request transfer */
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	/* Send control request to retrieve the HID report from the attached device */
-	if (USB_Host_SendControlRequest(HIDReportData) != HOST_SENDCONTROL_Successful)
-	  return ParseControlError;
-
-	/* Send the HID report to the parser for processing */
-	if (USB_ProcessHIDReport(HIDReportData, HIDReportSize, &HIDReportInfo) != HID_PARSE_Successful)
-	  return ParseError;
-
-	return ParseSuccessful;
-}
-
-/** Callback for the HID Report Parser. This function is called each time the HID report parser is about to store
- *  an IN, OUT or FEATURE item into the HIDReportInfo structure. To save on RAM, we are able to filter out items
- *  we aren't interested in (preventing us from being able to extract them later on, but saving on the RAM they would
- *  have occupied).
- *
- *  \param[in] CurrentItem  Pointer to the item the HID report parser is currently working with
- *
- *  \return Boolean \c true if the item should be stored into the HID report structure, \c false if it should be discarded
- */
-bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem)
-{
-	bool IsMouse = false;
-
-	/* Iterate through the item's collection path, until either the root collection node or a collection with the
-	 * Mouse Usage is found - this prevents Joysticks, which use identical descriptors except for the Joystick usage
-	 * parent node, from being erroneously treated as a mouse
-	 */
-	for (HID_CollectionPath_t* CurrPath = CurrentItem->CollectionPath; CurrPath != NULL; CurrPath = CurrPath->Parent)
-	{
-		if ((CurrPath->Usage.Page  == USAGE_PAGE_GENERIC_DCTRL) &&
-		    (CurrPath->Usage.Usage == USAGE_MOUSE))
-		{
-			IsMouse = true;
-			break;
-		}
-	}
-
-	/* If a collection with the mouse usage was not found, indicate that we are not interested in this item */
-	if (!IsMouse)
-	  return false;
-
-	/* Check the attributes of the current mouse item - see if we are interested in it or not;
-	 * only store BUTTON and GENERIC_DESKTOP_CONTROL items into the Processed HID Report
-	 * structure to save RAM and ignore the rest
-	 */
-	return ((CurrentItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) ||
-	        (CurrentItem->Attributes.Usage.Page == USAGE_PAGE_GENERIC_DCTRL));
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.h
deleted file mode 100644
index 2136a2c041..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for HIDReport.c.
- */
-
-#ifndef _HID_REPORT_H_
-#define _HID_REPORT_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "MouseHostWithParser.h"
-
-	/* Macros: */
-		/** HID Report Descriptor Usage for a Mouse. */
-		#define USAGE_MOUSE                 0x02
-
-		/** HID Report Descriptor Usage Page value for a toggle button. */
-		#define USAGE_PAGE_BUTTON           0x09
-
-		/** HID Report Descriptor Usage Page value for a Generic Desktop Control. */
-		#define USAGE_PAGE_GENERIC_DCTRL    0x01
-
-		/** HID Report Descriptor Usage value for a X axis movement. */
-		#define USAGE_X                     0x30
-
-		/** HID Report Descriptor Usage value for a Y axis movement. */
-		#define USAGE_Y                     0x31
-
-		/** HID Report Descriptor Usage value for a Scroll Wheel movement. */
-		#define USAGE_SCROLL_WHEEL          0x38
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref GetHIDReportData() function. */
-		enum MouseHostWithParser_GetHIDReportDataCodes_t
-		{
-			ParseSuccessful         = 0, /**< HID report descriptor parsed successfully */
-			ParseError              = 1, /**< Failed to fully process the HID report descriptor */
-			ParseControlError       = 2, /**< Control error occurred while trying to read the device HID descriptor */
-		};
-
-	/* External Variables: */
-		extern uint16_t         HIDReportSize;
-		extern HID_ReportInfo_t HIDReportInfo;
-
-	/* Function Prototypes: */
-		uint8_t GetHIDReportData(void);
-
-		bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.c
deleted file mode 100644
index ed8c9b08b2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MouseHostWithParser demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "MouseHostWithParser.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Mouse HID Parser Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		MouseHost_Task();
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	uint8_t ErrorCode;
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	printf_P(PSTR("Processing HID Report (Size %d Bytes).\r\n"), HIDReportSize);
-
-	/* Get and process the device's first HID report descriptor */
-	if ((ErrorCode = GetHIDReportData()) != ParseSuccessful)
-	{
-		puts_P(PSTR(ESC_FG_RED "Report Parse Error.\r\n"));
-
-		if (!(HIDReportInfo.TotalReportItems))
-			puts_P(PSTR("Not a valid Mouse." ESC_FG_WHITE));
-		else
-			printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Mouse Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Task to read and process the HID report descriptor and HID reports from the device and display the
- *  results onto the board LEDs.
- */
-void MouseHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	/* Select and unfreeze mouse data pipe */
-	Pipe_SelectPipe(MOUSE_DATA_IN_PIPE);
-	Pipe_Unfreeze();
-
-	/* Check to see if a packet has been received */
-	if (Pipe_IsINReceived())
-	{
-		/* Check if data has been received from the attached mouse */
-		if (Pipe_IsReadWriteAllowed())
-		{
-			/* Create buffer big enough for the report */
-			uint8_t MouseReport[Pipe_BytesInPipe()];
-
-			/* Load in the mouse report */
-			Pipe_Read_Stream_LE(MouseReport, Pipe_BytesInPipe(), NULL);
-
-			/* Process the read in mouse report from the device */
-			ProcessMouseReport(MouseReport);
-		}
-
-		/* Clear the IN endpoint, ready for next data packet */
-		Pipe_ClearIN();
-	}
-
-	/* Freeze mouse data pipe */
-	Pipe_Freeze();
-}
-
-/** Processes a read HID report from an attached mouse, extracting out elements via the HID parser results
- *  as required and displays movement and button presses on the board LEDs.
- *
- *  \param[in] MouseReport  Pointer to a HID report from an attached mouse device
- */
-void ProcessMouseReport(uint8_t* MouseReport)
-{
-	uint8_t LEDMask = LEDS_NO_LEDS;
-
-	/* Check each HID report item in turn, looking for mouse X/Y/button reports */
-	for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++)
-	{
-		/* Create a temporary item pointer to the next report item */
-		HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber];
-
-		bool FoundData;
-
-		if ((ReportItem->Attributes.Usage.Page        == USAGE_PAGE_BUTTON) &&
-			(ReportItem->ItemType                     == HID_REPORT_ITEM_In))
-		{
-			/* Get the mouse button value */
-			FoundData = USB_GetHIDReportItemInfo(MouseReport, ReportItem);
-
-			/* For multi-report devices - if the requested data was not in the issued report, continue */
-			if (!(FoundData))
-			  continue;
-
-			/* If button is pressed, all LEDs are turned on */
-			if (ReportItem->Value)
-			  LEDMask = LEDS_ALL_LEDS;
-		}
-		else if ((ReportItem->Attributes.Usage.Page   == USAGE_PAGE_GENERIC_DCTRL) &&
-				 (ReportItem->Attributes.Usage.Usage  == USAGE_SCROLL_WHEEL)       &&
-				 (ReportItem->ItemType                == HID_REPORT_ITEM_In))
-		{
-			/* Get the mouse wheel value if it is contained within the current
-			 * report, if not, skip to the next item in the parser list
-			 */
-			if (!(USB_GetHIDReportItemInfo(MouseReport, ReportItem)))
-			  continue;
-
-			int16_t WheelDelta = HID_ALIGN_DATA(ReportItem, int16_t);
-
-			if (WheelDelta)
-			  LEDMask = (LEDS_LED1 | LEDS_LED2 | ((WheelDelta > 0) ? LEDS_LED3 : LEDS_LED4));
-		}
-		else if ((ReportItem->Attributes.Usage.Page   == USAGE_PAGE_GENERIC_DCTRL) &&
-				 ((ReportItem->Attributes.Usage.Usage == USAGE_X)                  ||
-				  (ReportItem->Attributes.Usage.Usage == USAGE_Y))                 &&
-				 (ReportItem->ItemType                == HID_REPORT_ITEM_In))
-		{
-			/* Get the mouse relative position value */
-			FoundData = USB_GetHIDReportItemInfo(MouseReport, ReportItem);
-
-			/* For multi-report devices - if the requested data was not in the issued report, continue */
-			if (!(FoundData))
-			  continue;
-
-			int16_t DeltaMovement = HID_ALIGN_DATA(ReportItem, int16_t);
-
-			/* Check to see if a (non-zero) delta movement has been indicated */
-			if (DeltaMovement)
-			{
-				/* Determine if the report is for the X or Y delta movement, light LEDs as appropriate */
-				if (ReportItem->Attributes.Usage.Usage == USAGE_X)
-				  LEDMask |= ((DeltaMovement > 0) ? LEDS_LED1 : LEDS_LED2);
-				else
-				  LEDMask |= ((DeltaMovement > 0) ? LEDS_LED3 : LEDS_LED4);
-			}
-		}
-	}
-
-	/* Display the button information on the board LEDs */
-	LEDs_SetAllLEDs(LEDMask);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h
deleted file mode 100644
index 89407b4644..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MouseHostWithParser.c.
- */
-
-#ifndef _MOUSE_HOST_H_
-#define _MOUSE_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "ConfigDescriptor.h"
-		#include "HIDReport.h"
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void MouseHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-		void ProcessMouseReport(uint8_t* MouseReport);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.txt
deleted file mode 100644
index 9b1b7d055c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Mouse Host With HID Descriptor Parser Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Mouse host demonstration application. This gives a simple reference
- *  application for implementing a USB Mouse host, for USB mice using
- *  the standard mouse HID profile. It uses a HID parser for the HID
- *  reports, allowing for correct operation across all USB mice. This
- *  demo supports mice with a single HID report.
- *
- *  Mouse and scroll wheel movement and button presses are displayed
- *  on the board LEDs. On connection to a USB mouse, the report items
- *  will be processed and printed as a formatted list through the USART
- *  before the mouse is fully enumerated.
- *
- *  Currently only single interface mice are supported.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/asf.xml
deleted file mode 100644
index e06dbea4ae..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/asf.xml
+++ /dev/null
@@ -1,52 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Mouse HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.mouse_parser.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.mouse_parser"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.mouse_parser" caption="Mouse HID (with parser) Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Mouse HID Host demo with HID parser, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MouseHostWithParser.txt"/>

-

-		<build type="c-source" value="MouseHostWithParser.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="c-source" value="HIDReport.c"/>

-		<build type="header-file" value="MouseHostWithParser.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-		<build type="header-file" value="HIDReport.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/doxyfile
deleted file mode 100644
index 1336d998eb..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Mouse Host Demo (Using HID Descriptor Parser)"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/makefile
deleted file mode 100644
index 72144f1891..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/MouseHostWithParser/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MouseHostWithParser
-SRC          = $(TARGET).c ConfigDescriptor.c HIDReport.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c
deleted file mode 100644
index ce10bf8398..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-#include "ConfigDescriptor.h"
-
-/** Interface number for the bidirectional Printer interface found within the device. */
-uint8_t PrinterInterfaceNumber;
-
-/** Interface Alternate Setting number for the bidirectional Printer interface found within the device. */
-uint8_t PrinterAltSetting;
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a bidirectional Printer interface descriptor containing bulk IN and OUT data endpoints.
- *
- *  \return An error code from the \ref PrinterHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* PrinterInterface = NULL;
-	USB_Descriptor_Endpoint_t*  DataINEndpoint   = NULL;
-	USB_Descriptor_Endpoint_t*  DataOUTEndpoint  = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataINEndpoint) || !(DataOUTEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(PrinterInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextPrinterInterfaceBulkDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Get the next Printer interface from the configuration descriptor */
-			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-										  DComp_NextBidirectionalPrinterInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Descriptor not found, error out */
-				return NoCompatibleInterfaceFound;
-			}
-
-			/* Save the interface in case we need to refer back to it later */
-			PrinterInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-			/* Clear any found endpoints */
-			DataINEndpoint  = NULL;
-			DataOUTEndpoint = NULL;
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* If the endpoint is a IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		  DataINEndpoint  = EndpointData;
-		else
-		  DataOUTEndpoint = EndpointData;
-	}
-
-	/* Save Printer interface details for later use */
-	PrinterInterfaceNumber = PrinterInterface->InterfaceNumber;
-	PrinterAltSetting      = PrinterInterface->AlternateSetting;
-
-	/* Configure the Printer data IN pipe */
-	Pipe_ConfigurePipe(PRINTER_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-
-	/* Configure the Printer data OUT pipe */
-	Pipe_ConfigurePipe(PRINTER_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Bidirectional Printer Interface descriptor of the current Printer interface,
- *  aborting the search if the end of the descriptors is found.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextBidirectionalPrinterInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the descriptor class, subclass and protocol, break out if correct value interface found */
-		if ((Interface->Class    == PRNT_CSCP_PrinterClass)    &&
-		    (Interface->SubClass == PRNT_CSCP_PrinterSubclass) &&
-			(Interface->Protocol == PRNT_CSCP_BidirectionalProtocol))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Bulk Endpoint descriptor of the current Printer interface, aborting the
- *  search if another interface descriptor is found before the next endpoint.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextPrinterInterfaceBulkDataEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Endpoint)
-	{
-		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
-		/* Check the endpoint type, break out if correct BULK type endpoint found */
-		if ((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_BULK)
-		  return DESCRIPTOR_SEARCH_Found;
-	}
-	else if (Header->Type == DTYPE_Interface)
-	{
-		return DESCRIPTOR_SEARCH_Fail;
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h
deleted file mode 100644
index 68a9bbe8a3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "PrinterHost.h"
-		#include "Lib/PrinterCommands.h"
-
-	/* Macros: */
-		/** Pipe address of the Printer data IN pipe. */
-		#define PRINTER_DATA_IN_PIPE             (PIPE_DIR_IN  | 1)
-
-		/** Pipe address of the Printer data OUT pipe. */
-		#define PRINTER_DATA_OUT_PIPE            (PIPE_DIR_OUT | 2)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum PrinterHost_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* External Variables: */
-		/** Interface index of the Bidirectional Printer interface within the device, once the Configuration
-		 *  Descriptor has been processed.
-		 */
-		extern uint8_t PrinterInterfaceNumber;
-
-		/** Interface Alternate Setting index of the Bidirectional Printer interface within the device, once
-		 *  the Configuration Descriptor has been processed.
-		 */
-		extern uint8_t PrinterAltSetting;
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextBidirectionalPrinterInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextPrinterInterfaceBulkDataEndpoint(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/Lib/PrinterCommands.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/Lib/PrinterCommands.c
deleted file mode 100644
index 09af1cdf53..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/Lib/PrinterCommands.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Printer Device commands, to send/receive data to and from an attached USB
- *  printer, and to send and receive Printer Class control requests.
- */
-
-#include "PrinterCommands.h"
-
-/** Sends the given data directly to the printer via the data endpoints, for the sending of print commands in printer
- *  languages accepted by the attached printer (e.g. PCL).
- *
- *  \param[in] PrinterCommands  Pointer to the data to send to the attached printer
- *  \param[in] CommandSize  Size of the data to send to the attached printer
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
- */
-uint8_t Printer_SendData(const void* const PrinterCommands,
-                         const uint16_t CommandSize)
-{
-	uint8_t ErrorCode;
-
-	Pipe_SelectPipe(PRINTER_DATA_OUT_PIPE);
-	Pipe_Unfreeze();
-
-	if ((ErrorCode = Pipe_Write_Stream_LE(PrinterCommands, CommandSize, NULL)) != PIPE_RWSTREAM_NoError)
-	  return ErrorCode;
-
-	Pipe_ClearOUT();
-
-	Pipe_WaitUntilReady();
-
-	Pipe_Freeze();
-
-	return PIPE_RWSTREAM_NoError;
-}
-
-/** Issues a Printer class Get Device ID command to the attached device, to retrieve the device ID string (which indicates
- *  the accepted printer languages, the printer's model and other pertinent information).
- *
- *  \param[out] DeviceIDString Pointer to the destination where the returned string should be stored
- *  \param[in] BufferSize  Size in bytes of the allocated buffer for the returned Device ID string
- *
- *  \return A value from the USB_Host_SendControlErrorCodes_t enum
- */
-uint8_t Printer_GetDeviceID(char* DeviceIDString,
-                            const uint16_t BufferSize)
-{
-	uint8_t  ErrorCode;
-	uint16_t DeviceIDStringLength = 0;
-
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
-			.bRequest      = PRNT_REQ_GetDeviceID,
-			.wValue        = 0,
-			.wIndex        = PrinterInterfaceNumber,
-			.wLength       = sizeof(DeviceIDStringLength),
-		};
-
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	if ((ErrorCode = USB_Host_SendControlRequest(&DeviceIDStringLength)) != HOST_SENDCONTROL_Successful)
-	  return ErrorCode;
-
-	if (!(DeviceIDStringLength))
-	{
-		DeviceIDString[0] = 0x00;
-		return HOST_SENDCONTROL_Successful;
-	}
-
-	DeviceIDStringLength = SwapEndian_16(DeviceIDStringLength);
-
-	if (DeviceIDStringLength > BufferSize)
-	  DeviceIDStringLength = BufferSize;
-
-	USB_ControlRequest.wLength = DeviceIDStringLength;
-
-	if ((ErrorCode = USB_Host_SendControlRequest(DeviceIDString)) != HOST_SENDCONTROL_Successful)
-	  return ErrorCode;
-
-	/* Move string back two characters to remove the string length value from the start of the array */
-	memmove(&DeviceIDString[0], &DeviceIDString[2], DeviceIDStringLength - 2);
-
-	DeviceIDString[DeviceIDStringLength - 2] = 0x00;
-
-	return HOST_SENDCONTROL_Successful;
-}
-
-/** Issues a Printer class Get Port Status command to the attached device, to retrieve the current status flags of the
- *  printer.
- *
- *  \param[out] PortStatus  Pointer to the destination where the printer's status flag values should be stored
- *
- *  \return A value from the USB_Host_SendControlErrorCodes_t enum
- */
-uint8_t Printer_GetPortStatus(uint8_t* const PortStatus)
-{
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
-			.bRequest      = PRNT_REQ_GetPortStatus,
-			.wValue        = 0,
-			.wIndex        = PrinterInterfaceNumber,
-			.wLength       = sizeof(uint8_t),
-		};
-
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	return USB_Host_SendControlRequest(PortStatus);
-}
-
-/** Issues a Printer class Soft Reset command to the attached device, to reset the printer ready for new input without
- *  physically cycling the printer's power.
- *
- *  \return A value from the USB_Host_SendControlErrorCodes_t enum
- */
-uint8_t Printer_SoftReset(void)
-{
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
-			.bRequest      = PRNT_REQ_SoftReset,
-			.wValue        = 0,
-			.wIndex        = PrinterInterfaceNumber,
-			.wLength       = 0,
-		};
-
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	return USB_Host_SendControlRequest(NULL);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/Lib/PrinterCommands.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/Lib/PrinterCommands.h
deleted file mode 100644
index dad7c4e713..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/Lib/PrinterCommands.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for PrinterCommands.c.
- */
-
-#ifndef _PRINTER_COMMANDS_H_
-#define _PRINTER_COMMANDS_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <string.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "../PrinterHost.h"
-
-	/* Function Prototypes: */
-		uint8_t Printer_SendData(const void* const PrinterCommands,
-		                         const uint16_t CommandSize);
-		uint8_t Printer_GetDeviceID(char* DeviceIDString,
-		                            const uint16_t BufferSize);
-		uint8_t Printer_GetPortStatus(uint8_t* const PortStatus);
-		uint8_t Printer_SoftReset(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/PrinterHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/PrinterHost.c
deleted file mode 100644
index f57be350a5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/PrinterHost.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the PrinterHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "PrinterHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Printer Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		PrinterHost_Task();
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	uint8_t ErrorCode;
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Some printers use alternate settings to determine the communication protocol used - if so, send a SetInterface
-	 * request to switch to the interface alternate setting with the Bidirectional protocol */
-	if (PrinterAltSetting)
-	{
-		if ((ErrorCode = USB_Host_SetInterfaceAltSetting(PrinterInterfaceNumber, PrinterAltSetting)) != HOST_SENDCONTROL_Successful)
-		{
-			printf_P(PSTR(ESC_FG_RED "Control Error (Set Interface).\r\n"
-			                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-			LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-			USB_Host_SetDeviceConfiguration(0);
-			return;
-		}
-	}
-
-	puts_P(PSTR("Retrieving Device ID...\r\n"));
-
-	char DeviceIDString[300];
-	if ((ErrorCode = Printer_GetDeviceID(DeviceIDString, sizeof(DeviceIDString))) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Get Device ID).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	printf_P(PSTR("Printer Device ID: %s\r\n"), DeviceIDString);
-
-	puts_P(PSTR("Printer Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Task to manage an enumerated USB printer once connected, to display device
- *  information and print a test PCL page.
- */
-void PrinterHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	uint8_t ErrorCode;
-
-	/* Indicate device busy via the status LEDs */
-	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-	char  TestPageData[]    = "\033%-12345X\033E" "LUFA PCL Test Page" "\033E\033%-12345X";
-	uint16_t TestPageLength = strlen(TestPageData);
-
-	printf_P(PSTR("Sending Test Page (%d bytes)...\r\n"), TestPageLength);
-
-	/* Send the test page to the attached printer */
-	if ((ErrorCode = Printer_SendData(&TestPageData, TestPageLength)) != PIPE_RWSTREAM_NoError)
-	{
-		printf_P(PSTR(ESC_FG_RED "Error Sending Test Page.\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Test Page Sent.\r\n"));
-
-	/* Indicate device no longer busy */
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	USB_Host_SetDeviceConfiguration(0);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/PrinterHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/PrinterHost.h
deleted file mode 100644
index 15f43629f2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/PrinterHost.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for PrinterHost.c.
- */
-
-#ifndef _MASS_STORE_HOST_H_
-#define _MASS_STORE_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-		#include <string.h>
-
-		#include "ConfigDescriptor.h"
-		#include "Lib/PrinterCommands.h"
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY          LEDS_LED2
-
-	/* External Variables: */
-		extern uint8_t PrinterInterfaceNumber;
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void PrinterHost_Task(void);
-
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/PrinterHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/PrinterHost.txt
deleted file mode 100644
index e2a4820583..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/PrinterHost.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Printer Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Printer Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Bidirectional Protocol</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Printer Class Specification \n
- *        PCL Language Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Printer host demonstration application. This gives a simple reference
- *  application for implementing a USB Printer host, for USB printers using
- *  the bidirectional data encapsulation protocol and PCL language.
- *
- *  Upon connection of a compatible printer, the printer's device ID is sent
- *  to the AVR's serial port, and a simple test page is printed using the PCL
- *  printer language.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/asf.xml
deleted file mode 100644
index 7f86063604..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/asf.xml
+++ /dev/null
@@ -1,53 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Printer Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.printer.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.printer" caption="Printer Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Printer Host demo, implementing a basic USB printer host that can send raw printer control data to an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="Printer Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="PrinterHost.txt"/>

-

-		<build type="c-source" value="PrinterHost.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="header-file" value="PrinterHost.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-

-		<build type="c-source" value="Lib/PrinterCommands.c"/>

-		<build type="header-file" value="Lib/PrinterCommands.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/doxyfile
deleted file mode 100644
index f38d9823a9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Printer Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/makefile
deleted file mode 100644
index d6393c7281..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/PrinterHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = PrinterHost
-SRC          = $(TARGET).c ConfigDescriptor.c Lib/PrinterCommands.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c
deleted file mode 100644
index 1a8bf9a6c7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a RNDIS interface descriptor containing bulk data IN and OUT endpoints, and an interrupt event endpoint.
- *
- *  \return An error code from the \ref RNDISHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* RNDISControlInterface  = NULL;
-	USB_Descriptor_Endpoint_t*  DataINEndpoint         = NULL;
-	USB_Descriptor_Endpoint_t*  DataOUTEndpoint        = NULL;
-	USB_Descriptor_Endpoint_t*  NotificationEndpoint   = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataINEndpoint) || !(DataOUTEndpoint) || !(NotificationEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(RNDISControlInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextCDCDataInterfaceEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Check if we have already found the control interface's notification endpoint or not */
-			if (NotificationEndpoint)
-			{
-				/* Get the next RNDIS data interface from the configuration descriptor */
-				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-											  DComp_NextCDCDataInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-				{
-					/* Descriptor not found, error out */
-					return NoCompatibleInterfaceFound;
-				}
-
-				/* Clear any found endpoints */
-				DataINEndpoint       = NULL;
-				DataOUTEndpoint      = NULL;
-			}
-			else
-			{
-				/* Get the next RNDIS control interface from the configuration descriptor */
-				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-											  DComp_NextCDCControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-				{
-					/* Descriptor not found, error out */
-					return NoCompatibleInterfaceFound;
-				}
-
-				/* Save the interface in case we need to refer back to it later */
-				RNDISControlInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-				/* Clear any found endpoints */
-				NotificationEndpoint = NULL;
-			}
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* If the endpoint is a IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		{
-			/* Check if the found endpoint is a interrupt or bulk type descriptor */
-			if ((EndpointData->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT)
-			  NotificationEndpoint = EndpointData;
-			else
-			  DataINEndpoint = EndpointData;
-		}
-		else
-		{
-			DataOUTEndpoint = EndpointData;
-		}
-	}
-
-	/* Configure the RNDIS data IN pipe */
-	Pipe_ConfigurePipe(RNDIS_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-
-	/* Configure the RNDIS data OUT pipe */
-	Pipe_ConfigurePipe(RNDIS_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
-
-	/* Configure the RNDIS notification pipe */
-	Pipe_ConfigurePipe(RNDIS_NOTIFICATION_PIPE, EP_TYPE_INTERRUPT, NotificationEndpoint->EndpointAddress, NotificationEndpoint->EndpointSize, 1);
-	Pipe_SetInterruptPeriod(NotificationEndpoint->PollingIntervalMS);
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct CDC control Class, Subclass and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextCDCControlInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the CDC descriptor class, subclass and protocol, break out if correct control interface found */
-		if ((Interface->Class    == CDC_CSCP_CDCClass)    &&
-		    (Interface->SubClass == CDC_CSCP_ACMSubclass) &&
-		    (Interface->Protocol == CDC_CSCP_VendorSpecificProtocol))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct CDC data Class, Subclass and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextCDCDataInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the CDC descriptor class, subclass and protocol, break out if correct data interface found */
-		if ((Interface->Class    == CDC_CSCP_CDCDataClass)   &&
-		    (Interface->SubClass == CDC_CSCP_NoDataSubclass) &&
-		    (Interface->Protocol == CDC_CSCP_NoDataProtocol))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next bulk IN or OUT endpoint, or interrupt IN endpoint within the current interface,
- *  aborting the search if another interface descriptor is found before the required endpoint (so that it may be compared
- *  using a different comparator to determine if it is another CDC class interface).
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextCDCDataInterfaceEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Endpoint)
-	{
-		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
-		/* Check the endpoint type, break out if correct BULK or INTERRUPT type endpoint found */
-		if (((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_BULK) ||
-		    ((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-	else if (Header->Type == DTYPE_Interface)
-	{
-		return DESCRIPTOR_SEARCH_Fail;
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h
deleted file mode 100644
index 4b4ff6a4d1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "RNDISEthernetHost.h"
-
-	/* Macros: */
-		/** Pipe address for the RNDIS data IN pipe. */
-		#define RNDIS_DATA_IN_PIPE             (PIPE_DIR_IN  | 1)
-
-		/** Pipe address for the RNDIS data OUT pipe. */
-		#define RNDIS_DATA_OUT_PIPE            (PIPE_DIR_OUT | 2)
-
-		/** Pipe address for the RNDIS notification IN pipe. */
-		#define RNDIS_NOTIFICATION_PIPE        (PIPE_DIR_IN  | 3)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum RNDISHost_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextCDCControlInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextCDCDataInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextCDCDataInterfaceEndpoint(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.c
deleted file mode 100644
index 347b9c1d5f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  RNDIS Device commands, to issue RNDIS commands to the device for
- *  the control and data transfer between the host and RNDIS device.
- */
-
-#include "RNDISCommands.h"
-
-/** Current RNDIS Request ID, for associating sent commands with received data */
-uint32_t RequestID = 0;
-
-
-/** Function to send the given encapsulated RNDIS command to the device.
- *
- *  \param[in] Buffer  Source command data buffer to send to the device
- *  \param[in] Length   Number of bytes to send
- *
- *  \return A value from the USB_Host_SendControlErrorCodes_t enum
- */
-uint8_t RNDIS_SendEncapsulatedCommand(void* const Buffer,
-                                      const uint16_t Length)
-{
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
-			.bRequest      = RNDIS_REQ_SendEncapsulatedCommand,
-			.wValue        = 0,
-			.wIndex        = 0,
-			.wLength       = Length,
-		};
-
-	/* Select the control pipe for the request transfer */
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	return USB_Host_SendControlRequest(Buffer);
-}
-
-/** Function to receive the given encapsulated RNDIS response from the device.
- *
- *  \param[out] Buffer  Destination command data buffer to write read data from the device to
- *  \param[in] Length   Number of bytes to read
- *
- *  \return A value from the USB_Host_SendControlErrorCodes_t enum
- */
-uint8_t RNDIS_GetEncapsulatedResponse(void* const Buffer,
-                                      const uint16_t Length)
-{
-	USB_ControlRequest = (USB_Request_Header_t)
-		{
-			.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
-			.bRequest      = RNDIS_REQ_GetEncapsulatedResponse,
-			.wValue        = 0,
-			.wIndex        = 0,
-			.wLength       = Length,
-		};
-
-	/* Select the control pipe for the request transfer */
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-	return USB_Host_SendControlRequest(Buffer);
-}
-
-/** Sends a RNDIS KEEPALIVE command to the device, to ensure that it does not enter standby mode after periods
- *  of long inactivity.
- *
- *  \return A value from the USB_Host_SendControlErrorCodes_t enum or RNDIS_COMMAND_FAILED if the device returned a
- *          logical command failure
- */
-uint8_t RNDIS_SendKeepAlive(void)
-{
-	uint8_t ErrorCode;
-
-	RNDIS_KeepAlive_Message_t  KeepAliveMessage;
-	RNDIS_KeepAlive_Complete_t KeepAliveMessageResponse;
-
-	KeepAliveMessage.MessageType     = REMOTE_NDIS_KEEPALIVE_MSG;
-	KeepAliveMessage.MessageLength   = sizeof(RNDIS_KeepAlive_Message_t);
-	KeepAliveMessage.RequestId       = RequestID++;
-
-	if ((ErrorCode = RNDIS_SendEncapsulatedCommand(&KeepAliveMessage,
-	                                               sizeof(RNDIS_KeepAlive_Message_t))) != HOST_SENDCONTROL_Successful)
-	{
-		return ErrorCode;
-	}
-
-	if ((ErrorCode = RNDIS_GetEncapsulatedResponse(&KeepAliveMessageResponse,
-	                                               sizeof(RNDIS_KeepAlive_Complete_t))) != HOST_SENDCONTROL_Successful)
-	{
-		return ErrorCode;
-	}
-
-	return HOST_SENDCONTROL_Successful;
-}
-
-/** Initializes the attached RNDIS device's RNDIS interface.
- *
- *  \param[in] HostMaxPacketSize  Size of the packet buffer on the host
- *  \param[out] DeviceMaxPacketSize   Pointer to where the packet buffer size of the device is to be stored
- *
- *  \return A value from the USB_Host_SendControlErrorCodes_t enum or RNDIS_COMMAND_FAILED if the device returned a
- *          logical command failure
- */
-uint8_t RNDIS_InitializeDevice(const uint16_t HostMaxPacketSize,
-                               uint16_t* const DeviceMaxPacketSize)
-{
-	uint8_t ErrorCode;
-
-	RNDIS_Initialize_Message_t  InitMessage;
-	RNDIS_Initialize_Complete_t InitMessageResponse;
-
-	InitMessage.MessageType     = REMOTE_NDIS_INITIALIZE_MSG;
-	InitMessage.MessageLength   = sizeof(RNDIS_Initialize_Message_t);
-	InitMessage.RequestId       = RequestID++;
-
-	InitMessage.MajorVersion    = REMOTE_NDIS_VERSION_MAJOR;
-	InitMessage.MinorVersion    = REMOTE_NDIS_VERSION_MINOR;
-	InitMessage.MaxTransferSize = HostMaxPacketSize;
-
-	if ((ErrorCode = RNDIS_SendEncapsulatedCommand(&InitMessage,
-	                                               sizeof(RNDIS_Initialize_Message_t))) != HOST_SENDCONTROL_Successful)
-	{
-		return ErrorCode;
-	}
-
-	if ((ErrorCode = RNDIS_GetEncapsulatedResponse(&InitMessageResponse,
-	                                               sizeof(RNDIS_Initialize_Complete_t))) != HOST_SENDCONTROL_Successful)
-	{
-		return ErrorCode;
-	}
-
-	if (InitMessageResponse.Status != REMOTE_NDIS_STATUS_SUCCESS)
-	  return RNDIS_COMMAND_FAILED;
-
-	*DeviceMaxPacketSize = InitMessageResponse.MaxTransferSize;
-
-	return HOST_SENDCONTROL_Successful;
-}
-
-/** Sets a given RNDIS property of an attached RNDIS device.
- *
- *  \param[in] Oid  OID number of the parameter to set
- *  \param[in] Buffer  Pointer to where the property data is to be sourced from
- *  \param[in] Length  Length in bytes of the property data to sent to the device
- *
- *  \return A value from the USB_Host_SendControlErrorCodes_t enum or RNDIS_COMMAND_FAILED if the device returned a
- *          logical command failure
- */
-uint8_t RNDIS_SetRNDISProperty(const uint32_t Oid,
-                               void* Buffer,
-                               const uint16_t Length)
-{
-	uint8_t ErrorCode;
-
-	struct
-	{
-		RNDIS_Set_Message_t SetMessage;
-		uint8_t             ContiguousBuffer[Length];
-	} SetMessageData;
-
-	RNDIS_Set_Complete_t SetMessageResponse;
-
-	SetMessageData.SetMessage.MessageType    = REMOTE_NDIS_SET_MSG;
-	SetMessageData.SetMessage.MessageLength  = sizeof(RNDIS_Set_Message_t) + Length;
-	SetMessageData.SetMessage.RequestId      = RequestID++;
-
-	SetMessageData.SetMessage.Oid            = Oid;
-	SetMessageData.SetMessage.InformationBufferLength = Length;
-	SetMessageData.SetMessage.InformationBufferOffset = (sizeof(RNDIS_Set_Message_t) - sizeof(RNDIS_Message_Header_t));
-	SetMessageData.SetMessage.DeviceVcHandle = 0;
-
-	memcpy(SetMessageData.ContiguousBuffer, Buffer, Length);
-
-	if ((ErrorCode = RNDIS_SendEncapsulatedCommand(&SetMessageData,
-	                                               SetMessageData.SetMessage.MessageLength)) != HOST_SENDCONTROL_Successful)
-	{
-		return ErrorCode;
-	}
-
-	if ((ErrorCode = RNDIS_GetEncapsulatedResponse(&SetMessageResponse,
-	                                               sizeof(RNDIS_Set_Complete_t))) != HOST_SENDCONTROL_Successful)
-	{
-		return ErrorCode;
-	}
-
-	if (SetMessageResponse.Status != REMOTE_NDIS_STATUS_SUCCESS)
-	  return RNDIS_COMMAND_FAILED;
-
-	return HOST_SENDCONTROL_Successful;
-}
-
-/** Gets a given RNDIS property of an attached RNDIS device.
- *
- *  \param[in] Oid  OID number of the parameter to get
- *  \param[in] Buffer  Pointer to where the property data is to be written to
- *  \param[in] MaxLength  Length in bytes of the destination buffer size
- *
- *  \return A value from the USB_Host_SendControlErrorCodes_t enum or RNDIS_COMMAND_FAILED if the device returned a
- *          logical command failure
- */
-uint8_t RNDIS_QueryRNDISProperty(const uint32_t Oid,
-                                 void* Buffer,
-                                 const uint16_t MaxLength)
-{
-	uint8_t ErrorCode;
-
-	RNDIS_Query_Message_t QueryMessage;
-
-	struct
-	{
-		RNDIS_Query_Complete_t QueryMessageResponse;
-		uint8_t                ContiguousBuffer[MaxLength];
-	} QueryMessageResponseData;
-
-	QueryMessage.MessageType    = REMOTE_NDIS_QUERY_MSG;
-	QueryMessage.MessageLength  = sizeof(RNDIS_Query_Message_t);
-	QueryMessage.RequestId      = RequestID++;
-
-	QueryMessage.Oid            = Oid;
-	QueryMessage.InformationBufferLength = 0;
-	QueryMessage.InformationBufferOffset = 0;
-	QueryMessage.DeviceVcHandle = 0;
-
-	if ((ErrorCode = RNDIS_SendEncapsulatedCommand(&QueryMessage,
-	                                               sizeof(RNDIS_Query_Message_t))) != HOST_SENDCONTROL_Successful)
-	{
-		return ErrorCode;
-	}
-
-	if ((ErrorCode = RNDIS_GetEncapsulatedResponse(&QueryMessageResponseData,
-	                                               sizeof(QueryMessageResponseData))) != HOST_SENDCONTROL_Successful)
-	{
-		return ErrorCode;
-	}
-
-	if (QueryMessageResponseData.QueryMessageResponse.Status != REMOTE_NDIS_STATUS_SUCCESS)
-	  return RNDIS_COMMAND_FAILED;
-
-	memcpy(Buffer, &QueryMessageResponseData.ContiguousBuffer, MaxLength);
-
-	return HOST_SENDCONTROL_Successful;
-}
-
-/** Retrieves the size of a received packet, discarding the remainder of the RNDIS packet header to leave only the
- *  packet contents for processing by the host.
- *
- *  \param[out] PacketLength  Size of the packet currently in the pipe
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
- */
-uint8_t RNDIS_GetPacketLength(uint16_t* const PacketLength)
-{
-	uint8_t ErrorCode;
-
-	Pipe_SelectPipe(RNDIS_DATA_IN_PIPE);
-	Pipe_SetPipeToken(PIPE_TOKEN_IN);
-	Pipe_Unfreeze();
-
-	if (!(Pipe_IsReadWriteAllowed()))
-	{
-		*PacketLength = 0;
-		Pipe_Freeze();
-		return PIPE_RWSTREAM_NoError;
-	}
-
-	RNDIS_Packet_Message_t DeviceMessage;
-
-	if ((ErrorCode = Pipe_Read_Stream_LE(&DeviceMessage, sizeof(RNDIS_Packet_Message_t), NULL)) != PIPE_RWSTREAM_NoError)
-	{
-		return ErrorCode;
-	}
-
-	*PacketLength = (uint16_t)DeviceMessage.DataLength;
-
-	Pipe_Discard_Stream(DeviceMessage.DataOffset - (sizeof(RNDIS_Packet_Message_t) - sizeof(RNDIS_Message_Header_t)),
-	                    NULL);
-
-	Pipe_Freeze();
-
-	return PIPE_RWSTREAM_NoError;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.h
deleted file mode 100644
index c343f7cceb..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for RNDISCommands.c.
- */
-
-#ifndef _RNDIS_COMMANDS_H_
-#define _RNDIS_COMMANDS_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <stdio.h>
-		#include <string.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "../RNDISEthernetHost.h"
-
-	/* Macros: */
-		/** Additional error code for RNDIS functions when a device returns a logical command failure. */
-		#define RNDIS_COMMAND_FAILED                  0xC0
-
-	/* Function Prototypes: */
-		uint8_t RNDIS_SendEncapsulatedCommand(void* const Buffer,
-		                                      const uint16_t Length);
-		uint8_t RNDIS_GetEncapsulatedResponse(void* const Buffer,
-		                                      const uint16_t Length);
-
-		uint8_t RNDIS_SendKeepAlive(void);
-		uint8_t RNDIS_InitializeDevice(const uint16_t HostMaxPacketSize,
-		                               uint16_t* const DeviceMaxPacketSize);
-		uint8_t RNDIS_SetRNDISProperty(const uint32_t Oid,
-		                               void* Buffer,
-		                               const uint16_t Length);
-		uint8_t RNDIS_QueryRNDISProperty(const uint32_t Oid,
-		                                 void* Buffer,
-		                                 const uint16_t MaxLength);
-		uint8_t RNDIS_GetPacketLength(uint16_t* const PacketLength);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c
deleted file mode 100644
index 76504f44c4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the RNDISEthernetHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "RNDISEthernetHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "RNDIS Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		RNDISHost_Task();
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	uint8_t ErrorCode;
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	uint16_t DeviceMaxPacketSize;
-	if ((ErrorCode = RNDIS_InitializeDevice(1024, &DeviceMaxPacketSize)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Error Initializing Device.\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	printf_P(PSTR("Device Max Transfer Size: %lu bytes.\r\n"), DeviceMaxPacketSize);
-
-	/* We set the default filter to only receive packets we would be interested in */
-	uint32_t PacketFilter = (REMOTE_NDIS_PACKET_DIRECTED | REMOTE_NDIS_PACKET_BROADCAST | REMOTE_NDIS_PACKET_ALL_MULTICAST);
-	if ((ErrorCode = RNDIS_SetRNDISProperty(OID_GEN_CURRENT_PACKET_FILTER,
-	                                        &PacketFilter, sizeof(PacketFilter))) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Error Setting Device Packet Filter.\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	uint32_t VendorID;
-	if ((ErrorCode = RNDIS_QueryRNDISProperty(OID_GEN_VENDOR_ID,
-	                                          &VendorID, sizeof(VendorID))) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Error Getting Vendor ID.\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	printf_P(PSTR("Device Vendor ID: 0x%08lX\r\n"), VendorID);
-
-	puts_P(PSTR("RNDIS Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Task to read in data received from the attached RNDIS device and print it to the serial port.
- */
-void RNDISHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	uint8_t ErrorCode;
-
-	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-	uint16_t PacketLength;
-	if ((ErrorCode = RNDIS_GetPacketLength(&PacketLength)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Packet Reception Error.\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-		return;
-	}
-
-	if (!(PacketLength))
-	  return;
-
-	Pipe_Unfreeze();
-
-	printf_P(PSTR("***PACKET (Size %d)***\r\n"), PacketLength);
-
-	if (PacketLength > 1024)
-	{
-		puts_P(PSTR(ESC_FG_RED "Packet too large.\r\n" ESC_FG_WHITE));
-		Pipe_Discard_Stream(PacketLength, NULL);
-	}
-	else
-	{
-		uint8_t PacketBuffer[PacketLength];
-
-		Pipe_Read_Stream_LE(&PacketBuffer, PacketLength, NULL);
-
-		for (uint16_t i = 0; i < PacketLength; i++)
-		  printf("0x%02x ", PacketBuffer[i]);
-	}
-
-	Pipe_ClearIN();
-	Pipe_Freeze();
-
-	printf("\r\n\r\n");
-
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h
deleted file mode 100644
index 970fc35e5e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for RNDISEthernetHost.c.
- */
-
-#ifndef _RNDIS_HOST_H_
-#define _RNDIS_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "Lib/RNDISCommands.h"
-
-		#include "ConfigDescriptor.h"
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY          LEDS_LED2
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void RNDISHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/RNDISHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/RNDISHost.txt
deleted file mode 100644
index e9edd6d668..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/RNDISHost.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage RNDIS Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>Microsoft RNDIS Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  RNDIS host demonstration application. This gives a simple reference
- *  application for implementing a RNDIS Ethernet host, for USB devices such as
- *  modems.
- *
- *  This demo will enumerate an attached USB RNDIS device, print out its vendor ID
- *  and any received packets in raw form through the serial USART.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/asf.xml
deleted file mode 100644
index 38f71272e5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/asf.xml
+++ /dev/null
@@ -1,53 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="RNDIS Ethernet Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.rndis.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.rndis"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.rndis" caption="RNDIS Ethernet Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Microsoft RNDIS Ethernet Host demo, implementing a RNDIS host that can send and receive Ethernet data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="RNDIS Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="RNDISHost.txt"/>

-

-		<build type="c-source" value="RNDISEthernetHost.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="header-file" value="RNDISEthernetHost.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-

-		<build type="c-source" value="Lib/RNDISCommands.c"/>

-		<build type="header-file" value="Lib/RNDISCommands.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/doxyfile
deleted file mode 100644
index 0ece36d656..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - RNDIS Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/makefile
deleted file mode 100644
index 4f78b5d8c9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/RNDISEthernetHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = RNDISEthernetHost
-SRC          = $(TARGET).c ConfigDescriptor.c Lib/RNDISCommands.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c
deleted file mode 100644
index 3a629e0a4b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a SI interface descriptor containing bulk IN and OUT data endpoints.
- *
- *  \return An error code from the \ref StillImageHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* StillImageInterface = NULL;
-	USB_Descriptor_Endpoint_t*  DataINEndpoint      = NULL;
-	USB_Descriptor_Endpoint_t*  DataOUTEndpoint     = NULL;
-	USB_Descriptor_Endpoint_t*  EventsEndpoint      = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataINEndpoint) || !(DataOUTEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(StillImageInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextStillImageInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Get the next Still Image interface from the configuration descriptor */
-			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-										  DComp_NextStillImageInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Descriptor not found, error out */
-				return NoCompatibleInterfaceFound;
-			}
-
-			/* Save the interface in case we need to refer back to it later */
-			StillImageInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-			/* Clear any found endpoints */
-			DataINEndpoint  = NULL;
-			DataOUTEndpoint = NULL;
-			EventsEndpoint  = NULL;
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* If the endpoint is a IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		{
-			/* Check if the found endpoint is a interrupt or bulk type descriptor */
-			if ((EndpointData->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT)
-			  EventsEndpoint = EndpointData;
-			else
-			  DataINEndpoint = EndpointData;
-		}
-		else
-		{
-			DataOUTEndpoint = EndpointData;
-		}
-	}
-
-	/* Configure the Still Image data IN pipe */
-	Pipe_ConfigurePipe(SIMAGE_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-
-	/* Configure the Still Image data OUT pipe */
-	Pipe_ConfigurePipe(SIMAGE_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
-
-	/* Configure the Still Image events pipe */
-	Pipe_ConfigurePipe(SIMAGE_EVENTS_PIPE, EP_TYPE_INTERRUPT, EventsEndpoint->EndpointAddress, EventsEndpoint->EndpointSize, 1);
-	Pipe_SetInterruptPeriod(EventsEndpoint->PollingIntervalMS);
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct Still Image Class, Subclass and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextStillImageInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the descriptor class, subclass and protocol, break out if correct interface found */
-		if ((Interface->Class    == SI_CSCP_StillImageClass)    &&
-		    (Interface->SubClass == SI_CSCP_StillImageSubclass) &&
-		    (Interface->Protocol == SI_CSCP_BulkOnlyProtocol))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interrupt or Bulk Endpoint descriptor of the current SI interface, aborting the
- *  search if another interface descriptor is found before the next endpoint.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextStillImageInterfaceDataEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Endpoint)
-	{
-		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
-		/* Check the endpoint type, break out if correct BULK or INTERRUPT type endpoint found */
-		if (((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_BULK) ||
-		    ((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-	else if (Header->Type == DTYPE_Interface)
-	{
-		return DESCRIPTOR_SEARCH_Fail;
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h
deleted file mode 100644
index 7a00f40dee..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "StillImageHost.h"
-
-	/* Macros: */
-		/** Pipe address of the Still Image data IN pipe. */
-		#define SIMAGE_DATA_IN_PIPE            (PIPE_DIR_IN  | 1)
-
-		/** Pipe address of the Still Image data OUT pipe. */
-		#define SIMAGE_DATA_OUT_PIPE           (PIPE_DIR_OUT | 2)
-
-		/** Pipe address of the Still Image events IN pipe. */
-		#define SIMAGE_EVENTS_PIPE             (PIPE_DIR_IN  | 3)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum StillImageHost_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextStillImageInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextStillImageInterfaceDataEndpoint(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/Lib/PIMACodes.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/Lib/PIMACodes.h
deleted file mode 100644
index e8b00875f1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/Lib/PIMACodes.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header containing macros for possible PIMA commands. Refer to the PIMA standard
- *  documentation for more information on each PIMA command.
- */
-
-#ifndef _PIMA_CODES_H_
-
-	/* Macros: */
-		#define PIMA_OPERATION_GETDEVICEINFO         0x1001
-		#define PIMA_OPERATION_OPENSESSION           0x1002
-		#define PIMA_OPERATION_CLOSESESSION          0x1003
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c
deleted file mode 100644
index 0d23d46f84..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Still Image Device commands, to issue PIMA commands to the device for
- *  reading device status, capacity, and other characteristics as well as
- *  reading and writing of stored image data.
- */
-
-#include "StillImageCommands.h"
-
-/** PIMA block container for the block to send to the device */
-PIMA_Container_t PIMA_SendBlock;
-
-/** PIMA block container for the last received block from the device */
-PIMA_Container_t PIMA_ReceivedBlock;
-
-/** PIMA block container for the last event block received from the device */
-PIMA_Container_t PIMA_EventBlock;
-
-
-/** Function to send the PIMA command container to the attached still image device. */
-void SImage_SendBlockHeader(void)
-{
-	/* Unfreeze the data OUT pipe ready for data transmission */
-	Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
-	Pipe_Unfreeze();
-
-	/* Write the PIMA block to the data OUT pipe */
-	Pipe_Write_Stream_LE(&PIMA_SendBlock, PIMA_COMMAND_SIZE(0), NULL);
-
-	/* If the block type is a command, send its parameters (if any) */
-	if (PIMA_SendBlock.Type == PIMA_CONTAINER_CommandBlock)
-	{
-		/* Determine the size of the parameters in the block via the data length attribute */
-		uint8_t ParamBytes = (PIMA_SendBlock.DataLength - PIMA_COMMAND_SIZE(0));
-
-		/* Check if any parameters in the command block */
-		if (ParamBytes)
-		{
-			/* Write the PIMA parameters to the data OUT pipe */
-			Pipe_Write_Stream_LE(&PIMA_SendBlock.Params, ParamBytes, NULL);
-		}
-
-		/* Send the PIMA command block to the attached device */
-		Pipe_ClearOUT();
-	}
-
-	/* Freeze pipe after use */
-	Pipe_Freeze();
-}
-
-/** Function to receive a PIMA event container from the attached still image device.
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
- */
-uint8_t SImage_ReceiveEventHeader(void)
-{
-	uint8_t ErrorCode;
-
-	/* Unfreeze the events pipe */
-	Pipe_SelectPipe(SIMAGE_EVENTS_PIPE);
-	Pipe_Unfreeze();
-
-	/* Read in the event data into the global structure */
-	ErrorCode = Pipe_Read_Stream_LE(&PIMA_EventBlock, sizeof(PIMA_EventBlock), NULL);
-
-	/* Clear the pipe after read complete to prepare for next event */
-	Pipe_ClearIN();
-
-	/* Freeze the event pipe again after use */
-	Pipe_Freeze();
-
-	return ErrorCode;
-}
-
-/** Function to receive a PIMA response container from the attached still image device.
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
- */
-uint8_t SImage_ReceiveBlockHeader(void)
-{
-	uint16_t TimeoutMSRem        = COMMAND_DATA_TIMEOUT_MS;
-	uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber();
-
-	/* Unfreeze the data IN pipe */
-	Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
-	Pipe_Unfreeze();
-
-	/* Wait until data received on the IN pipe */
-	while (!(Pipe_IsINReceived()))
-	{
-		uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber();
-
-		/* Check to see if a new frame has been issued (1ms elapsed) */
-		if (CurrentFrameNumber != PreviousFrameNumber)
-		{
-			/* Save the new frame number and decrement the timeout period */
-			PreviousFrameNumber = CurrentFrameNumber;
-			TimeoutMSRem--;
-
-			/* Check to see if the timeout period for the command has elapsed */
-			if (!(TimeoutMSRem))
-			  return PIPE_RWSTREAM_Timeout;
-		}
-
-		Pipe_Freeze();
-		Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
-		Pipe_Unfreeze();
-
-		/* Check if pipe stalled (command failed by device) */
-		if (Pipe_IsStalled())
-		{
-			/* Clear the stall condition on the OUT pipe */
-			USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress());
-
-			/* Return error code and break out of the loop */
-			return PIPE_RWSTREAM_PipeStalled;
-		}
-
-		Pipe_Freeze();
-		Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
-		Pipe_Unfreeze();
-
-		/* Check if pipe stalled (command failed by device) */
-		if (Pipe_IsStalled())
-		{
-			/* Clear the stall condition on the IN pipe */
-			USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress());
-
-			/* Return error code */
-			return PIPE_RWSTREAM_PipeStalled;
-		}
-
-		/* Check to see if the device was disconnected, if so exit function */
-		if (USB_HostState == HOST_STATE_Unattached)
-		  return PIPE_RWSTREAM_DeviceDisconnected;
-	}
-
-	/* Load in the response from the attached device */
-	Pipe_Read_Stream_LE(&PIMA_ReceivedBlock, PIMA_COMMAND_SIZE(0), NULL);
-
-	/* Check if the returned block type is a response block */
-	if (PIMA_ReceivedBlock.Type == PIMA_CONTAINER_ResponseBlock)
-	{
-		/* Determine the size of the parameters in the block via the data length attribute */
-		uint8_t ParamBytes = (PIMA_ReceivedBlock.DataLength - PIMA_COMMAND_SIZE(0));
-
-		/* Check if the device has returned any parameters */
-		if (ParamBytes)
-		{
-			/* Read the PIMA parameters from the data IN pipe */
-			Pipe_Read_Stream_LE(&PIMA_ReceivedBlock.Params, ParamBytes, NULL);
-		}
-
-		/* Clear pipe bank after use */
-		Pipe_ClearIN();
-	}
-
-	/* Freeze the IN pipe after use */
-	Pipe_Freeze();
-
-	return PIPE_RWSTREAM_NoError;
-}
-
-/** Function to send the given data to the device, after a command block has been issued.
- *
- *  \param[in] Buffer  Source data buffer to send to the device
- *  \param[in] Bytes   Number of bytes to send
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
- */
-uint8_t SImage_SendData(void* const Buffer,
-                        const uint16_t Bytes)
-{
-	uint8_t ErrorCode;
-
-	/* Unfreeze the data OUT pipe */
-	Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE);
-	Pipe_Unfreeze();
-
-	/* Write the data contents to the pipe */
-	ErrorCode = Pipe_Write_Stream_LE(Buffer, Bytes, NULL);
-
-	/* Send the last packet to the attached device */
-	Pipe_ClearOUT();
-
-	/* Freeze the pipe again after use */
-	Pipe_Freeze();
-
-	return ErrorCode;
-}
-
-/** Function to receive the given data from the device, after a response block has been received.
- *
- *  \param[out] Buffer  Destination data buffer to put read bytes from the device
- *  \param[in] Bytes    Number of bytes to receive
- *
- *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum
- */
-uint8_t SImage_ReadData(void* const Buffer,
-                        const uint16_t Bytes)
-{
-	uint8_t ErrorCode;
-
-	/* Unfreeze the data IN pipe */
-	Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE);
-	Pipe_Unfreeze();
-
-	/* Read in the data into the buffer */
-	ErrorCode = Pipe_Read_Stream_LE(Buffer, Bytes, NULL);
-
-	/* Freeze the pipe again after use */
-	Pipe_Freeze();
-
-	return ErrorCode;
-}
-
-/** Function to test if a PIMA event block is waiting to be read in from the attached device.
- *
- *  \return True if an event is waiting to be read in from the device, \c false otherwise
- */
-bool SImage_IsEventReceived(void)
-{
-	bool IsEventReceived = false;
-
-	/* Unfreeze the Event pipe */
-	Pipe_SelectPipe(SIMAGE_EVENTS_PIPE);
-	Pipe_Unfreeze();
-
-	/* If the pipe contains data, an event has been received */
-	if (Pipe_BytesInPipe())
-	  IsEventReceived = true;
-
-	/* Freeze the pipe after use */
-	Pipe_Freeze();
-
-	return IsEventReceived;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.h
deleted file mode 100644
index 714a3fef72..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for StillImageCommands.c.
- */
-
-#ifndef _STILL_IMAGE_COMMANDS_H_
-#define _STILL_IMAGE_COMMANDS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "PIMACodes.h"
-		#include "../StillImageHost.h"
-
-	/* Macros: */
-		/** Timeout period between the issuing of a command to a device, and the reception of the first packet. */
-		#define COMMAND_DATA_TIMEOUT_MS        10000
-
-	/* External Variables: */
-		extern PIMA_Container_t PIMA_SendBlock;
-		extern PIMA_Container_t PIMA_ReceivedBlock;
-		extern PIMA_Container_t PIMA_EventBlock;
-
-	/* Function Prototypes: */
-		void    SImage_SendBlockHeader(void);
-		uint8_t SImage_ReceiveBlockHeader(void);
-		uint8_t SImage_ReceiveEventHeader(void);
-		uint8_t SImage_SendData(void* const Buffer,
-		                        const uint16_t Bytes);
-		uint8_t SImage_ReadData(void* const Buffer,
-		                        const uint16_t Bytes);
-		bool    SImage_IsEventReceived(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/StillImageHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/StillImageHost.c
deleted file mode 100644
index f7838cf6cf..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/StillImageHost.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the StillImageHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "StillImageHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Still Image Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		StillImageHost_Task();
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	uint8_t ErrorCode;
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	puts_P(PSTR("Still Image Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Task to print device information through the serial port, and open/close a test PIMA session with the
- *  attached Still Image device.
- */
-void StillImageHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	uint8_t ErrorCode;
-
-	/* Indicate device busy via the status LEDs */
-	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-	puts_P(PSTR("Retrieving Device Info...\r\n"));
-
-	PIMA_SendBlock = (PIMA_Container_t)
-		{
-			.DataLength    = PIMA_COMMAND_SIZE(0),
-			.Type          = PIMA_CONTAINER_CommandBlock,
-			.Code          = PIMA_OPERATION_GETDEVICEINFO,
-			.TransactionID = 0x00000000,
-			.Params        = {},
-		};
-
-	/* Send the GETDEVICEINFO block */
-	SImage_SendBlockHeader();
-
-	/* Receive the response data block */
-	if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError)
-	{
-		ShowCommandError(ErrorCode, false);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Calculate the size of the returned device info data structure */
-	uint16_t DeviceInfoSize = (PIMA_ReceivedBlock.DataLength - PIMA_COMMAND_SIZE(0));
-
-	/* Create a buffer large enough to hold the entire device info */
-	uint8_t DeviceInfo[DeviceInfoSize];
-
-	/* Read in the data block data (containing device info) */
-	SImage_ReadData(DeviceInfo, DeviceInfoSize);
-
-	/* Once all the data has been read, the pipe must be cleared before the response can be sent */
-	Pipe_ClearIN();
-
-	/* Create a pointer for walking through the info dataset */
-	uint8_t* DeviceInfoPos = DeviceInfo;
-
-	/* Skip over the data before the unicode device information strings */
-	DeviceInfoPos +=  8;                                          // Skip to VendorExtensionDesc String
-	DeviceInfoPos += (1 + UNICODE_STRING_LENGTH(*DeviceInfoPos)); // Skip over VendorExtensionDesc String
-	DeviceInfoPos +=  2;                                          // Skip over FunctionalMode
-	DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Supported Operations Array
-	DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Supported Events Array
-	DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Supported Device Properties Array
-	DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Capture Formats Array
-	DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Image Formats Array
-
-	/* Extract and convert the Manufacturer Unicode string to ASCII and print it through the USART */
-	char Manufacturer[*DeviceInfoPos];
-	UnicodeToASCII(DeviceInfoPos, Manufacturer);
-	printf_P(PSTR("   Manufacturer: %s\r\n"), Manufacturer);
-
-	DeviceInfoPos += 1 + UNICODE_STRING_LENGTH(*DeviceInfoPos);   // Skip over Manufacturer String
-
-	/* Extract and convert the Model Unicode string to ASCII and print it through the USART */
-	char Model[*DeviceInfoPos];
-	UnicodeToASCII(DeviceInfoPos, Model);
-	printf_P(PSTR("   Model: %s\r\n"), Model);
-
-	DeviceInfoPos += 1 + UNICODE_STRING_LENGTH(*DeviceInfoPos);   // Skip over Model String
-
-	/* Extract and convert the Device Version Unicode string to ASCII and print it through the USART */
-	char DeviceVersion[*DeviceInfoPos];
-	UnicodeToASCII(DeviceInfoPos, DeviceVersion);
-	printf_P(PSTR("   Device Version: %s\r\n"), DeviceVersion);
-
-	/* Receive the final response block from the device */
-	if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError)
-	{
-		ShowCommandError(ErrorCode, false);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Verify that the command completed successfully */
-	if ((PIMA_ReceivedBlock.Type != PIMA_CONTAINER_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
-	{
-		ShowCommandError(PIMA_ReceivedBlock.Code, true);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Opening Session...\r\n"));
-
-	PIMA_SendBlock = (PIMA_Container_t)
-		{
-			.DataLength    = PIMA_COMMAND_SIZE(1),
-			.Type          = PIMA_CONTAINER_CommandBlock,
-			.Code          = PIMA_OPERATION_OPENSESSION,
-			.TransactionID = 0x00000000,
-			.Params        = {0x00000001},
-		};
-
-	/* Send the OPENSESSION block, open a session with an ID of 0x0001 */
-	SImage_SendBlockHeader();
-
-	/* Receive the response block from the device */
-	if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError)
-	{
-		ShowCommandError(ErrorCode, false);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Verify that the command completed successfully */
-	if ((PIMA_ReceivedBlock.Type != PIMA_CONTAINER_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
-	{
-		ShowCommandError(PIMA_ReceivedBlock.Code, true);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Closing Session...\r\n"));
-
-	PIMA_SendBlock = (PIMA_Container_t)
-		{
-			.DataLength    = PIMA_COMMAND_SIZE(1),
-			.Type          = PIMA_CONTAINER_CommandBlock,
-			.Code          = PIMA_OPERATION_CLOSESESSION,
-			.TransactionID = 0x00000001,
-			.Params        = {0x00000001},
-		};
-
-	/* Send the CLOSESESSION block, close the session with an ID of 0x0001 */
-	SImage_SendBlockHeader();
-
-	/* Receive the response block from the device */
-	if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError)
-	{
-		ShowCommandError(ErrorCode, false);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Verify that the command completed successfully */
-	if ((PIMA_ReceivedBlock.Type != PIMA_CONTAINER_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
-	{
-		ShowCommandError(PIMA_ReceivedBlock.Code, true);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("Done.\r\n"));
-
-	/* Indicate device no longer busy */
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	USB_Host_SetDeviceConfiguration(0);
-}
-
-/** Function to convert a given Unicode encoded string to ASCII. This function will only work correctly on Unicode
- *  strings which contain ASCII printable characters only.
- *
- *  \param[in] UnicodeString  Pointer to a Unicode encoded input string
- *  \param[out] Buffer        Pointer to a buffer where the converted ASCII string should be stored
- */
-void UnicodeToASCII(uint8_t* UnicodeString,
-                    char* Buffer)
-{
-	/* Get the number of characters in the string, skip to the start of the string data */
-	uint8_t CharactersRemaining = *(UnicodeString++);
-
-	/* Loop through the entire unicode string */
-	while (CharactersRemaining--)
-	{
-		/* Load in the next unicode character (only the lower byte, as only Unicode coded ASCII is supported) */
-		*(Buffer++) = *UnicodeString;
-
-		/* Jump to the next unicode character */
-		UnicodeString += 2;
-	}
-
-	/* Null terminate the string */
-	*Buffer = 0;
-}
-
-/** Displays a PIMA command error via the device's serial port.
- *
- *  \param[in] ErrorCode          Error code of the function which failed to complete successfully
- *  \param[in] ResponseCodeError  Indicates if the error is due to a command failed indication from the device, or a communication failure
- */
-void ShowCommandError(uint8_t ErrorCode,
-                      bool ResponseCodeError)
-{
-	const char* FailureType = ((ResponseCodeError) ? PSTR("Response Code != OK") : PSTR("Transaction Fail"));
-
-	printf_P(PSTR(ESC_FG_RED "Command Error (%S).\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), FailureType, ErrorCode);
-
-	/* Indicate error via status LEDs */
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/StillImageHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/StillImageHost.h
deleted file mode 100644
index ebceb02804..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/StillImageHost.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for StillImageHost.c.
- */
-
-#ifndef _STILL_IMAGE_HOST_H_
-#define _STILL_IMAGE_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include "ConfigDescriptor.h"
-
-		#include "Lib/StillImageCommands.h"
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY          LEDS_LED2
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void StillImageHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-		void UnicodeToASCII(uint8_t* UnicodeString,
-		                    char* Buffer);
-		void ShowCommandError(uint8_t ErrorCode,
-		                      bool ResponseCodeError);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/StillImageHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/StillImageHost.txt
deleted file mode 100644
index 193228a207..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/StillImageHost.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Still Image Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Still Image Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Still Image Class Specification \n
- *        PIMA 15740 Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Still Image host demonstration application. This gives a simple reference
- *  application for implementing a Still Image host, for USB devices such as
- *  digital cameras.
- *
- *  This demo will enumerate an attached USB Still Image device, print out its
- *  information structure, open a session with the device and finally close the
- *  session.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/asf.xml
deleted file mode 100644
index cbf1e2ca2e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/asf.xml
+++ /dev/null
@@ -1,54 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Still Image Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.si.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.si"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.si" caption="Still Image Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Still Image Host demo, implementing a Still Image host that can send and receive PIMA data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="Still Image Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="StillImageHost.txt"/>

-

-		<build type="c-source" value="StillImageHost.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="header-file" value="StillImageHost.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-

-		<build type="c-source" value="Lib/StillImageCommands.c"/>

-		<build type="header-file" value="Lib/StillImageCommands.h"/>

-		<build type="header-file" value="Lib/PIMACodes.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/doxyfile
deleted file mode 100644
index c050dc2cca..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Still Image Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/makefile
deleted file mode 100644
index 1889fa57c6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/StillImageHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = StillImageHost
-SRC          = $(TARGET).c ConfigDescriptor.c Lib/StillImageCommands.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c
deleted file mode 100644
index 28b596bd66..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a CDC interface descriptor containing bulk data IN and OUT endpoints, and an interrupt event endpoint.
- *
- *  \return An error code from the \ref CDCHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* CDCControlInterface  = NULL;
-	USB_Descriptor_Endpoint_t*  DataINEndpoint       = NULL;
-	USB_Descriptor_Endpoint_t*  DataOUTEndpoint      = NULL;
-	USB_Descriptor_Endpoint_t*  NotificationEndpoint = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataINEndpoint) || !(DataOUTEndpoint) || !(NotificationEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(CDCControlInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextCDCDataInterfaceEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Check if we have already found the control interface's notification endpoint or not */
-			if (NotificationEndpoint)
-			{
-				/* Get the next CDC data interface from the configuration descriptor */
-				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-											  DComp_NextCDCDataInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-				{
-					/* Descriptor not found, error out */
-					return NoCompatibleInterfaceFound;
-				}
-
-				/* Clear any found endpoints */
-				DataINEndpoint       = NULL;
-				DataOUTEndpoint      = NULL;
-			}
-			else
-			{
-				/* Get the next CDC control interface from the configuration descriptor */
-				if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-											  DComp_NextCDCControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-				{
-					/* Descriptor not found, error out */
-					return NoCompatibleInterfaceFound;
-				}
-
-				/* Save the interface in case we need to refer back to it later */
-				CDCControlInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-				/* Clear any found endpoints */
-				NotificationEndpoint = NULL;
-			}
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* If the endpoint is a IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		{
-			/* Check if the found endpoint is a interrupt or bulk type descriptor */
-			if ((EndpointData->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT)
-			  NotificationEndpoint = EndpointData;
-			else
-			  DataINEndpoint = EndpointData;
-		}
-		else
-		{
-			DataOUTEndpoint = EndpointData;
-		}
-	}
-
-	/* Configure the CDC data IN pipe */
-	Pipe_ConfigurePipe(CDC_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-
-	/* Configure the CDC data OUT pipe */
-	Pipe_ConfigurePipe(CDC_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
-
-	/* Configure the CDC notification pipe */
-	Pipe_ConfigurePipe(CDC_NOTIFICATION_PIPE, EP_TYPE_INTERRUPT, NotificationEndpoint->EndpointAddress, NotificationEndpoint->EndpointSize, 1);
-	Pipe_SetInterruptPeriod(NotificationEndpoint->PollingIntervalMS);
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct CDC control Class, Subclass and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextCDCControlInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the CDC descriptor class, subclass and protocol, break out if correct control interface found */
-		if ((Interface->Class    == CDC_CSCP_CDCClass)    &&
-		    (Interface->SubClass == CDC_CSCP_ACMSubclass) &&
-		    (Interface->Protocol == CDC_CSCP_ATCommandProtocol))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct CDC data Class, Subclass and Protocol values.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextCDCDataInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the CDC descriptor class, subclass and protocol, break out if correct data interface found */
-		if ((Interface->Class    == CDC_CSCP_CDCDataClass)   &&
-		    (Interface->SubClass == CDC_CSCP_NoDataSubclass) &&
-		    (Interface->Protocol == CDC_CSCP_NoDataProtocol))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next bulk IN or OUT endpoint, or interrupt IN endpoint within the current interface,
- *  aborting the search if another interface descriptor is found before the required endpoint (so that it may be compared
- *  using a different comparator to determine if it is another CDC class interface).
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextCDCDataInterfaceEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	if (Header->Type == DTYPE_Endpoint)
-	{
-		USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
-		if (((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_BULK) ||
-		    ((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT))
-		{
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-	else if (Header->Type == DTYPE_Interface)
-	{
-		return DESCRIPTOR_SEARCH_Fail;
-	}
-
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h
deleted file mode 100644
index c587f3ac14..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "VirtualSerialHost.h"
-
-	/* Macros: */
-		/** Pipe address for the CDC data IN pipe. */
-		#define CDC_DATA_IN_PIPE               (PIPE_DIR_IN  | 1)
-
-		/** Pipe address for the CDC data OUT pipe. */
-		#define CDC_DATA_OUT_PIPE              (PIPE_DIR_OUT | 2)
-
-		/** Pipe address for the CDC notification IN pipe. */
-		#define CDC_NOTIFICATION_PIPE          (PIPE_DIR_IN  | 3)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum CDCHost_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextCDCControlInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextCDCDataInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextCDCDataInterfaceEndpoint(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.c b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.c
deleted file mode 100644
index 3fef27b112..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the VirtualSerialHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "VirtualSerialHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "CDC Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		CDCHost_Task();
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	puts_P(PSTR("Getting Config Data.\r\n"));
-
-	uint8_t ErrorCode;
-
-	/* Get and process the configuration descriptor data */
-	if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-	{
-		if (ErrorCode == ControlError)
-		  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-		else
-		  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-		printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	CDC_LineEncoding_t LineEncoding = { .BaudRateBPS = 9600,
-	                                    .CharFormat  = CDC_LINEENCODING_OneStopBit,
-	                                    .ParityType  = CDC_PARITY_None,
-	                                    .DataBits    = 8                            };
-
-	USB_ControlRequest = (USB_Request_Header_t)
-	{
-		.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
-		.bRequest      = CDC_REQ_SetLineEncoding,
-		.wValue        = 0,
-		.wIndex        = 0,
-		.wLength       = sizeof(LineEncoding),
-	};
-
-	/* Set the Line Encoding of the CDC interface within the device, so that it is ready to accept data */
-	Pipe_SelectPipe(PIPE_CONTROLPIPE);
-	if (USB_Host_SendControlRequest(&LineEncoding) != HOST_SENDCONTROL_Successful)
-	{
-		printf_P(PSTR(ESC_FG_RED "Control Error (Set Line Encoding).\r\n"
-		                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	puts_P(PSTR("CDC Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Task to read in data received from the attached CDC device and print it to the serial port.
- */
-void CDCHost_Task(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	/* Select the data IN pipe */
-	Pipe_SelectPipe(CDC_DATA_IN_PIPE);
-	Pipe_Unfreeze();
-
-	/* Check to see if a packet has been received */
-	if (Pipe_IsINReceived())
-	{
-		/* Re-freeze IN pipe after the packet has been received */
-		Pipe_Freeze();
-
-		/* Check if data is in the pipe */
-		if (Pipe_IsReadWriteAllowed())
-		{
-			/* Get the length of the pipe data, and create a new buffer to hold it */
-			uint16_t BufferLength = Pipe_BytesInPipe();
-			uint8_t  Buffer[BufferLength];
-
-			/* Read in the pipe data to the temporary buffer */
-			Pipe_Read_Stream_LE(Buffer, BufferLength, NULL);
-
-			/* Print out the buffer contents to the USART */
-			for (uint16_t BufferByte = 0; BufferByte < BufferLength; BufferByte++)
-			  putchar(Buffer[BufferByte]);
-		}
-
-		/* Clear the pipe after it is read, ready for the next packet */
-		Pipe_ClearIN();
-	}
-
-	/* Re-freeze IN pipe after use */
-	Pipe_Freeze();
-
-	/* Select and unfreeze the notification pipe */
-	Pipe_SelectPipe(CDC_NOTIFICATION_PIPE);
-	Pipe_Unfreeze();
-
-	/* Check if a packet has been received */
-	if (Pipe_IsINReceived())
-	{
-		/* Discard the unused event notification */
-		Pipe_ClearIN();
-	}
-
-	/* Freeze notification IN pipe after use */
-	Pipe_Freeze();
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.h b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.h
deleted file mode 100644
index b84e665118..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for VirtualSerialHost.c.
- */
-
-#ifndef _VIRTUALSERIAL_HOST_H_
-#define _VIRTUALSERIAL_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "ConfigDescriptor.h"
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void CDCHost_Task(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.txt b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.txt
deleted file mode 100644
index 1e1f9f1ae2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage CDC Host Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  CDC host demonstration application. This gives a simple reference application
- *  for implementing a USB CDC host, for CDC devices using the standard ACM profile.
- *
- *  This demo prints out received CDC data through the serial port.
- *
- *  Note that this demo is only compatible with devices which report the correct CDC
- *  and ACM class, subclass and protocol values. Most USB-Serial cables have vendor
- *  specific features, thus use vendor-specific class/subclass/protocol codes to force
- *  the user to use specialized drivers. This demo is not compatible with such devices.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/asf.xml
deleted file mode 100644
index cb0d568d39..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/asf.xml
+++ /dev/null
@@ -1,50 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Virtual Serial CDC Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.cdc.example.avr8">

-		<require idref="lufa.demos.host.lowlevel.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.demos.host.lowlevel.cdc" caption="Virtual Serial CDC Host Demo (Low Level APIs)">

-		<info type="description" value="summary">

-		Virtual Serial Host demo, implementing a CDC host that can send and receive data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="CDC Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="VirtualSerialHost.txt"/>

-

-		<build type="c-source" value="VirtualSerialHost.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="header-file" value="VirtualSerialHost.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/doxyfile
deleted file mode 100644
index ac8ecfa62e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Virtual Serial Host Demo"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/makefile
deleted file mode 100644
index 0ac79fdd97..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/VirtualSerialHost/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = VirtualSerialHost
-SRC          = $(TARGET).c ConfigDescriptor.c $(LUFA_SRC_USB) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/makefile
deleted file mode 100644
index 9e3919da44..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/LowLevel/makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-
-# Makefile to build all the LUFA Host Demos. Call with "make all" to
-# rebuild all Host demos.
-
-# Projects are pre-cleaned before each one is built, to ensure any
-# custom LUFA library build options are reflected in the compiled
-# code.
-
-PROJECT_DIRECTORIES := $(shell ls -d */)
-
-# This makefile is potentially infinitely recursive if something really bad
-# happens when determining the set of project directories - hard-abort if
-# more than 10 levels deep to avoid angry emails.
-ifeq ($(MAKELEVEL), 10)
-   $(error EMERGENCY ABORT: INFINITE RECURSION DETECTED)
-endif
-
-# Need to special-case building without a per-project object directory
-ifeq ($(OBJDIR),)
-   # If no target specified, force "clean all" and disallow parallel build
-   ifeq ($(MAKECMDGOALS),)
-      MAKECMDGOALS := clean all
-      .NOTPARALLEL:
-   endif
-
-   # If one of the targets is to build, force "clean" beforehand and disallow parallel build
-   ifneq ($(findstring all, $(MAKECMDGOALS)),)
-      MAKECMDGOALS := clean $(MAKECMDGOALS)
-      .NOTPARALLEL:
-   endif
-endif
-
-%: $(PROJECT_DIRECTORIES)
-	@echo . > /dev/null
-
-$(PROJECT_DIRECTORIES):
-	@$(MAKE) -C $@ $(MAKECMDGOALS)
-
-.PHONY: $(PROJECT_DIRECTORIES)
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/Host/makefile
deleted file mode 100644
index 3325e97d8b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/Host/makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-
-# Makefile to build all the LUFA Class Driver and Low Level Demos. Call with
-# "make all" to rebuild all demos of both types.
-
-# Projects are pre-cleaned before each one is built, to ensure any
-# custom LUFA library build options are reflected in the compiled
-# code.
-
-all:
-
-%:
-	$(MAKE) -C ClassDriver $@
-	$(MAKE) -C LowLevel $@
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Demos/makefile b/tmk_core/protocol/lufa/LUFA-git/Demos/makefile
deleted file mode 100644
index 752f64ab10..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Demos/makefile
+++ /dev/null
@@ -1,22 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-
-# Makefile to build all the LUFA Demos. Call with "make all" to
-# rebuild all demos.
-
-# Projects are pre-cleaned before each one is built, to ensure any
-# custom LUFA library build options are reflected in the compiled
-# code.
-
-all:
-
-%:
-	$(MAKE) -C Device $@
-	$(MAKE) -C Host $@
-	$(MAKE) -C DualRole $@
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISP-MKII.c b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISP-MKII.c
deleted file mode 100644
index 9cff5b4210..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISP-MKII.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the AVRISP project. This file contains the main tasks of
- *  the project and is responsible for the initial application hardware configuration.
- */
-
-#include "AVRISP-MKII.h"
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-	V2Protocol_Init();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		#if (BOARD == BOARD_USBTINYMKII)
-		/* On the USBTINY-MKII target, there is a secondary LED which indicates the current selected power
-		   mode - either VBUS, or sourced from the VTARGET pin of the programming connectors */
-		LEDs_ChangeLEDs(LEDMASK_VBUSPOWER, (PIND & (1 << 0)) ? 0 : LEDMASK_VBUSPOWER);
-		#endif
-
-		AVRISP_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	#if defined(RESET_TOGGLES_LIBUSB_COMPAT)
-	UpdateCurrentCompatibilityMode();
-	#endif
-
-	/* USB Stack Initialization */
-	USB_Init();
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Setup AVRISP Data OUT endpoint */
-	ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1);
-
-	/* Setup AVRISP Data IN endpoint if it is using a physically different endpoint */
-	if ((AVRISP_DATA_IN_EPADDR & ENDPOINT_EPNUM_MASK) != (AVRISP_DATA_OUT_EPADDR & ENDPOINT_EPNUM_MASK))
-	  ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1);
-
-	/* Indicate endpoint configuration success or failure */
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Processes incoming V2 Protocol commands from the host, returning a response when required. */
-void AVRISP_Task(void)
-{
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	V2Params_UpdateParamValues();
-
-	Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPADDR);
-
-	/* Check to see if a V2 Protocol command has been received */
-	if (Endpoint_IsOUTReceived())
-	{
-		LEDs_SetAllLEDs(LEDMASK_BUSY);
-
-		/* Pass off processing of the V2 Protocol command to the V2 Protocol handler */
-		V2Protocol_ProcessCommand();
-
-		LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	}
-}
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- *
- *  \param[in]  wValue                 Descriptor type and index to retrieve
- *  \param[in]  wIndex                 Sub-index to retrieve (such as a localized string language)
- *  \param[out] DescriptorAddress      Address of the retrieved descriptor
- *  \param[out] DescriptorMemorySpace  Memory space that the descriptor is stored in
- *
- *  \return Length of the retrieved descriptor in bytes, or NO_DESCRIPTOR if the descriptor was not found
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress,
-                                    uint8_t* DescriptorMemorySpace)
-{
-	return AVRISP_GetDescriptor(wValue, wIndex, DescriptorAddress, DescriptorMemorySpace);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISP-MKII.h b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISP-MKII.h
deleted file mode 100644
index 70f86f41c5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISP-MKII.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for AVRISP.c.
- */
-
-#ifndef _AVRISP_H_
-#define _AVRISP_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/interrupt.h>
-		#include <avr/power.h>
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#if defined(ADC)
-			#include <LUFA/Drivers/Peripheral/ADC.h>
-		#endif
-
-		#include "AVRISPDescriptors.h"
-		#include "Lib/V2Protocol.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED1 | LEDS_LED2)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY         LEDS_LED2
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR         LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_BUSY             (LEDS_LED1 | LEDS_LED2)
-
-		/** LED mask for the library LED driver, to indicate that the target is being powered by VBUS. */
-		#define LEDMASK_VBUSPOWER         LEDS_LED3
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void AVRISP_Task(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress,
-		                                    uint8_t* const DescriptorMemorySpace)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3) ATTR_NON_NULL_PTR_ARG(4);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISP-MKII.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISP-MKII.txt
deleted file mode 100644
index 71ef387a1c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISP-MKII.txt
+++ /dev/null
@@ -1,385 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage AVRISP MKII Programmer Project
- *
- *  \section Sec_Compat Project Compatibility
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) - <i>8KB versions with reduced features only</i>
- *
- *  \section Sec_Info USB Information
- *
- *  The following table gives a rundown of the USB utilization of this project.
- *
- * <table>
- *  <tr>
- *   <td><b>USB Mode:</b></td>
- *   <td>Device</td>
- *  </tr>
- *  <tr>
- *   <td><b>USB Class:</b></td>
- *   <td>Vendor Specific Class</td>
- *  </tr>
- *  <tr>
- *   <td><b>USB Subclass:</b></td>
- *   <td>N/A</td>
- *  </tr>
- *  <tr>
- *   <td><b>Relevant Standards:</b></td>
- *   <td>Atmel AVRISP MKII Protocol Specification</td>
- *  </tr>
- *  <tr>
- *   <td><b>Supported USB Speeds:</b></td>
- *   <td>Full Speed Mode</td>
- *  </tr>
- * </table>
- *
- *  \section Sec_Description Project Description
- *
- *  Firmware for an Atmel Studio/AVR Studio compatible AVRISP-MKII clone programmer. This project will enable the USB
- *  AVR series of microcontrollers to act as a clone of the official Atmel AVRISP-MKII programmer, usable within
- *  Atmel Studio/AVR Studio or with any software capable of driving a real Atmel AVRISP-MKII programmer. In its most
- *  basic form, it allows for the programming of AVR TINY, MEGA and XMEGA devices aat the programmer's VCC voltage from
- *  within Atmel Studio/AVR Studio with no special hardware other than the USB AVR and the parts needed for the USB
- *  interface. If the user desires, more advanced circuits incorporating level conversion can be made to allow for the
- *  programming of target AVRs running at a different voltage to the programmer.
- *
- *  This device spoofs Atmel's official AVRISP-MKII device PID so that it remains compatible with Atmel's AVRISP-MKII
- *  drivers. When prompted, direct your OS to install Atmel's AVRISP-MKII drivers provided with Atmel Studio/AVR Studio.
- *
- *  Note that this design currently has the following limitations:
- *    - No reversed/shorted target connector detection and notification
- *    - A separate header is required for each of the ISP, PDI and TPI programming protocols that the user wishes to use
- *
- *  On AVR models with an ADC converter, the USB AVR's AVCC pin should be tied to 5V (e.g. VBUS) and the
- *  \c VTARGET_ADC_CHANNEL token should be set to an appropriate ADC channel number in the project makefile for VTARGET
- *  detection to operate correctly. On models without an ADC converter, VTARGET will report a fixed 3.3V level at all times
- *  which should allow the programmer to remain compatible at the protocol level with all AVR devices.
- *
- *  While this application can be compiled for USB AVRs with as little as 8KB of FLASH, for full functionality 16KB or more
- *  of FLASH is required. On 8KB devices, ISP or PDI/TPI protocol programming support can be disabled to reduce program size.
- *
- *  \section Sec_KnownIssues Known Issues:
- *
- *  \par Incompatible with newer AVRDUDE releases.
- *  Due to <a href="http://savannah.nongnu.org/bugs/index.php?40831">a change in 6.0.1 and never AVRDUDE releases</a>,
- *  these builds are incompatible with the AVRISP-MKII clone project. Use an older 5.x release until AVRDUDE is patched.
- *
- *  \par XMEGA EEPROM programming fails in some cases.
- *  Several users have reported that XMEGA EEPROM programming fails unless the chip is erased first. If a non-blank EEPROM
- *  is present, writing further EEPROM data causes corruption.
- *  <a href="https://github.com/abcminiuser/lufa/issues/25">LUFA issue tracker entry</a>.
- *
- *  \section Sec_Installation Installation
- *  The programmer supports multiple platforms, both Windows and Linux.
- *
- *  \subsection SSec_LinuxInstallation Linux Installation
- *  On Linux systems, the programmer should be usable out of the box with no special setup other than (on some systems)
- *  editing of the system permissions to allow the programmer to be used from a non-elevated (root) context. The programmer
- *  is compatible with the free open source AVRDude programming software project.
- *
- *  \subsection SSec_WindowsInstallation Windows Installation
- *  On Windows systems, due to an unfortunate limitation of the USB AVR devices and the driver used in the official AVR
- *  Studio/Atmel Studio platform, the programmer cannot be made compatible with AVRDude and AVR Studio/Atmel Studio at the
- *  same time. Instead, the programmer will be compatible with the official Atmel software by default, with a recompilation
- *  with the \c LIBUSB_DRIVER_COMPAT token (see \ref Sec_Options) being required to use the alternative libUSB driver
- *  compatibility mode that will allow the programmer to work under AVRDude on Windows.
- *
- *  If compiled for Atmel Studio/AVR Studio compatibility, install the Jungo device drivers that ship with the Atmel software.
- *  If compiled in the alternative libUSB compatibility mode for AVRDude use, install the libUSB drivers that are included
- *  with your compiled copy of AVRDude, or create them using the libUSB-Win32 (http://sourceforge.net/projects/libusb-win32)
- *  project.
- *
- *  For convenience, the programmer will report two different serial numbers depending on the firmware compatibility mode, so
- *  that the correct driver can be installed for the matching firmware. If the \c RESET_TOGGLES_LIBUSB_COMPAT compile option
- *  is used (see \ref Sec_Options) this allows for an easy way to automatically switch device drivers along with the firmware
- *  compatibility mode. The serials are:
- *
- *  <table>
- *   <tr>
- *    <th><b>Serial Number:</b></th>
- *    <th><b>Compatibility Mode:</b></th>
- *   </tr>
- *   <tr>
- *    <td>000200012345</td>
- *    <td>Jungo (Atmel Studio) Compatibility</td>
- *   </tr>
- *   <tr>
- *    <td>000200112345</td>
- *    <td>libUSB Compatibility</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_ISP ISP Connections
- *  Connections to the device for SPI programming (when enabled):
- *
- *  <table>
- *   <tr>
- *    <th><b>Programmer Pin:</b></th>
- *    <th><b>Target Device Pin:</b></th>
- *    <th><b>ISP 6 Pin Layout:</b></th>
- *   </tr>
- *   <tr>
- *    <td>MISO</td>
- *    <td>PDO</td>
- *    <td>1</td>
- *   </tr>
- *   <tr>
- *    <td>ADCx <b><sup>1</sup></b></td>
- *    <td>VTARGET</td>
- *    <td>2</td>
- *   </tr>
- *   <tr>
- *    <td>SCLK</td>
- *    <td>SCLK</td>
- *    <td>3</td>
- *   </tr>
- *   <tr>
- *    <td>MOSI</td>
- *    <td>PDI</td>
- *    <td>4</td>
- *   </tr>
- *   <tr>
- *    <td>PORTx.y <b><sup>2</sup></b></td>
- *    <td>/RESET</td>
- *    <td>5</td>
- *   </tr>
- *   <tr>
- *    <td>GND</td>
- *    <td>GND</td>
- *    <td>6</td>
- *   </tr>
- *  </table>
- *
- *  In addition, the AVR's OCR1A pin will generate a 4MHz clock, to act as an external rescue device clock if the
- *  fuses have been mis-set. To use the recovery clock, connect the OCR1A pin of the USB AVR to the target AVR's
- *  XTAL1 pin, and set the ISP programming speed to 125KHz (note: other ISP speeds will not work correctly).
- *
- *  <b><sup>1</sup></b> <i>Optional, see \ref Sec_Options section - for USB AVRs with ADC modules only</i> \n
- *  <b><sup>2</sup></b> <i>See AUX line related tokens in the \ref Sec_Options section</i>
- *
- *  \section Sec_PDI PDI Connections
- *  Connections to the device for PDI programming (when enabled):
- *
- *  <table>
- *   <tr>
- *    <th><b>Programmer Pin:</b></th>
- *    <th><b>Target Device Pin:</b></th>
- *    <th><b>PDI 6 Pin Layout:</b></th>
- *   </tr>
- *   <tr>
- *    <td>Tx/Rx <b><sup>2</sup></b></td>
- *    <td>DATA</td>
- *    <td>1</td>
- *   </tr>
- *   <tr>
- *    <td>ADCx <b><sup>1</sup></b></td>
- *    <td>VTARGET</td>
- *    <td>2</td>
- *   </tr>
- *   <tr>
- *    <td>N/A</td>
- *    <td>N/A</td>
- *    <td>3</td>
- *   </tr>
- *   <tr>
- *    <td>N/A</td>
- *    <td>N/A</td>
- *    <td>4</td>
- *   </tr>
- *   <tr>
- *    <td>XCK</td>
- *    <td>CLOCK</td>
- *    <td>5</td>
- *   </tr>
- *   <tr>
- *    <td>GND</td>
- *    <td>GND</td>
- *    <td>6</td>
- *   </tr>
- *  </table>
- *
- *  <b><sup>1</sup></b> <i>Optional, see \ref Sec_Options section - for USB AVRs with ADC modules only</i> \n
- *  <b><sup>2</sup></b> <i>The AVR's Tx and Rx become the DATA line when connected together via a pair of 220 ohm resistors</i> \n
- *
- *  \section Sec_TPI TPI Connections
- *  Connections to the device for TPI programming (when enabled):
- *
- *  <table>
- *   <tr>
- *    <th><b>Programmer Pin:</b></th>
- *    <th><b>Target Device Pin:</b></th>
- *    <th><b>TPI 6 Pin Layout:</b></th>
- *   </tr>
- *   <tr>
- *    <td>Tx/Rx <b><sup>2</sup></b></td>
- *    <td>DATA</td>
- *    <td>1</td>
- *   </tr>
- *   <tr>
- *    <td>ADCx <b><sup>1</sup></b></td>
- *    <td>VTARGET</td>
- *    <td>2</td>
- *   </tr>
- *   <tr>
- *    <td>XCK <b><sup>2</sup></b></td>
- *    <td>CLOCK</td>
- *    <td>3</td>
- *   </tr>
- *   <tr>
- *    <td>N/A</td>
- *    <td>N/A</td>
- *    <td>4</td>
- *   </tr>
- *   <tr>
- *    <td>PORTx.y <b><sup>3</sup></b></td>
- *    <td>/RESET</td>
- *    <td>5</td>
- *   </tr>
- *   <tr>
- *    <td>GND</td>
- *    <td>GND</td>
- *    <td>6</td>
- *   </tr>
- *  </table>
- *
- *  <b><sup>1</sup></b> <i>Optional, see \ref Sec_Options section - for USB AVRs with ADC modules only</i> \n
- *  <b><sup>2</sup></b> <i>The AVR's Tx and Rx become the DATA line when connected together via a pair of 220 ohm resistors</i> \n
- *  <b><sup>3</sup></b> <i>See AUX line related tokens in the \ref Sec_Options section</i>
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>AUX_LINE_PORT</td>
- *    <td>AppConfig.h</td>
- *    <td>PORT register for the programmer's AUX target line. The use of this line varies between the programming protocols,
- *        but is generally used for the target's /RESET line.
- *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
- *   </tr>
- *   <tr>
- *    <td>AUX_LINE_PIN</td>
- *    <td>AppConfig.h</td>
- *    <td>PIN register for the programmer's AUX target line. The use of this line varies between the programming protocols,
- *        but is generally used for the target's /RESET line.
- *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
- *   </tr>
- *   <tr>
- *    <td>AUX_LINE_DDR</td>
- *    <td>AppConfig.h</td>
- *    <td>DDR register for the programmer's AUX target line. The use of this line varies between the programming protocols,
- *        but is generally used for the target's /RESET line.
- *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
- *   </tr>
- *   <tr>
- *    <td>AUX_LINE_MASK</td>
- *    <td>AppConfig.h</td>
- *    <td>Mask for the programmer's AUX target line. The use of this line varies between the programming protocols,
- *        but is generally used for the target's /RESET line. <b>Must not be the AVR's /SS pin</b>.
- *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
- *   </tr>
- *   <tr>
- *    <td>VTARGET_ADC_CHANNEL</td>
- *    <td>AppConfig.h</td>
- *    <td>ADC channel number (on supported AVRs) to use for VTARGET level detection, if NO_VTARGET_DETECT is not defined.
- *        \n \n <i>Ignored when compiled for targets lacking an ADC.</i></td>
- *   </tr>
- *   <tr>
- *    <td>ENABLE_ISP_PROTOCOL</td>
- *    <td>AppConfig.h</td>
- *    <td>Define to enable SPI programming protocol support.
- *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
- *   </tr>
- *   <tr>
- *    <td>ENABLE_XPROG_PROTOCOL</td>
- *    <td>AppConfig.h</td>
- *    <td>Define to enable PDI and TPI programming protocol support.
- *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
- *   </tr>
- *   <tr>
- *    <td>NO_VTARGET_DETECT</td>
- *    <td>AppConfig.h</td>
- *    <td>Define to disable VTARGET sampling and reporting on AVR models with an ADC converter. This will cause the programmer
- *        to report a fixed 3.3V target voltage to the host regardless of the real target voltage.
- *        \n \n <i>Ignored when compiled for targets lacking an ADC.</i></td>
- *   </tr>
- *   <tr>
- *    <td>VTARGET_REF_VOLTS</td>
- *    <td>AppConfig.h</td>
- *    <td>Indicates the programmer AVR's AVCC reference voltage when measuring the target's supply voltage. Note that the supply
- *        voltage should never exceed the reference voltage on the programmer AVR without some form of protection to prevent damage
- *        to the ADC.
- *        \n \n <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
- *   </tr>
- *   <tr>
- *    <td>VTARGET_USE_INTERNAL_REF</td>
- *    <td>AppConfig.h</td>
- *    <td>Selects the internal 2.56V ADC reference voltage, instead of using the AVR's VREF pin. When enabled, this option will
- *        override the VTARGET_REF_VOLTS configuration option.
- *        \n \n <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
- *   </tr>
- *   <tr>
- *    <td>VTARGET_SCALE_FACTOR</td>
- *    <td>AppConfig.h</td>
- *    <td>Indicates the target's supply voltage scale factor when applied to the ADC. A simple resistive divider can be used on the
- *        ADC pin for measuring the target's supply voltage, so that voltages above the programmer AVR's AVCC reference voltage can be
- *        measured. This should be the reciprocal of the division performed - e.g. if the VTARGET voltage is halved, this should be set
- *        to 2.
- *        \n \n <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
- *   </tr>
- *   <tr>
- *    <td>LIBUSB_DRIVER_COMPAT</td>
- *    <td>AppConfig.h</td>
- *    <td>Define to switch to a non-standard endpoint scheme, breaking compatibility with Atmel Studio/AVR Studio under Windows but
- *        making the code compatible with software such as avrdude (all platforms) that use the libUSB driver.
- *
- *        \note This option is incompatible with \c RESET_TOGGLES_LIBUSB_COMPAT.</td>
- *   </tr>
- *   <tr>
- *    <td>RESET_TOGGLES_LIBUSB_COMPAT</td>
- *    <td>AppConfig.h</td>
- *    <td>Define to make the /RESET line of the AVR toggle between Jungo and libUSB driver compatibility modes. Each time the AVR is
- *        reset externally via the reset pin, the compatibility mode will be toggled. The compatibility mode is preserved between
- *        power cycles and is not toggled via other forms of reset such as Watchdog or Brown Out.
- *
- *        When this option is enabled, all board LEDs will flash twice on startup for Jungo compatibility mode, and five times for
- *        libUSB compatibility mode.
- *
- *        \note This option is incompatible with \c LIBUSB_DRIVER_COMPAT.</td>
- *   </tr>
- *   <tr>
- *    <td>XCK_RESCUE_CLOCK_ENABLE</td>
- *    <td>AppConfig.h</td>
- *    <td>Define to move the ISP rescue clock to the AVR's XCK pin instead of the OCR1A output pin. This is useful for existing programming
- *        hardware that does not expose the OCR1A pin of the AVR, but <i>may</i> cause some issues with PDI programming mode.</td>
- *   </tr>
- *   <tr>
- *    <td>INVERTED_ISP_MISO</td>
- *    <td>AppConfig.h</td>
- *    <td>Define to invert the received data on the ISP MISO line. This is sometimes needed depending on the level translation hardware used,
- *        if the translator hardware inverts the received logic level.</td>
- *   </tr>
- *   <tr>
- *    <td>FIRMWARE_VERSION_MINOR</td>
- *    <td>AppConfig.h</td>
- *    <td>Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible
- *        with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISPDescriptors.c b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISPDescriptors.c
deleted file mode 100644
index a098e7020a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISPDescriptors.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "AVRISPDescriptors.h"
-
-#if defined(RESET_TOGGLES_LIBUSB_COMPAT) || defined(__DOXYGEN__)
-	/** Indicates if an external reset has occurred and the compatibility mode needs to be altered */
-	static bool AVRISP_NeedCompatibilitySwitch ATTR_NO_INIT;
-
-	/** Current AVRISP data IN endpoint address. */
-	uint8_t AVRISP_CurrDataINEndpointAddress;
-
-	/** Saved AVRISP data IN endpoint address in EEPROM. */
-	uint8_t AVRISP_CurrDataINEndpointAddress_EEPROM EEMEM;
-#endif
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM AVRISP_DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_VendorSpecificClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2104,
-	.ReleaseNumber          = VERSION_BCD(2,0,0),
-
-	.ManufacturerStrIndex   = AVRISP_STRING_ID_Manufacturer,
-	.ProductStrIndex        = AVRISP_STRING_ID_Product,
-	.SerialNumStrIndex      = AVRISP_STRING_ID_Serial,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-AVRISP_USB_Descriptor_Configuration_t AVRISP_ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(AVRISP_USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.AVRISP_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_AVRISP,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = USB_CSCP_VendorSpecificClass,
-			.SubClass               = USB_CSCP_NoDeviceSubclass,
-			.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.AVRISP_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-#if defined(RESET_TOGGLES_LIBUSB_COMPAT)
-			.EndpointAddress        = 0,
-#else
-			.EndpointAddress        = AVRISP_DATA_IN_EPADDR,
-#endif
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = AVRISP_DATA_EPSIZE,
-			.PollingIntervalMS      = 0x0A
-		},
-
-	.AVRISP_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = AVRISP_DATA_OUT_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = AVRISP_DATA_EPSIZE,
-			.PollingIntervalMS      = 0x0A
-		},
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM AVRISP_LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM AVRISP_ManufacturerString = USB_STRING_DESCRIPTOR(L"ATMEL");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM AVRISP_ProductString = USB_STRING_DESCRIPTOR(L"AVRISP mkII");
-
-/** Serial number string. This is a Unicode string containing the device's unique serial number, expressed as a
- *  series of uppercase hexadecimal digits.
- */
-USB_Descriptor_String_t AVRISP_SerialString = USB_STRING_DESCRIPTOR(L"000200012345\0"
-    // Note: Real AVRISP-MKII has the embedded NUL byte, bug in firmware?
-);
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t AVRISP_GetDescriptor(const uint16_t wValue,
-                              const uint8_t wIndex,
-                              const void** const DescriptorAddress,
-                              uint8_t* DescriptorMemorySpace)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	*DescriptorMemorySpace = MEMSPACE_FLASH;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &AVRISP_DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			*DescriptorMemorySpace = MEMSPACE_RAM;
-			#if defined(RESET_TOGGLES_LIBUSB_COMPAT)
-				/* Update the configuration descriptor with the current endpoint address */
-				AVRISP_ConfigurationDescriptor.AVRISP_DataInEndpoint.EndpointAddress = AVRISP_CurrDataINEndpointAddress;
-			#endif
-
-			Address = &AVRISP_ConfigurationDescriptor;
-			Size    = sizeof(AVRISP_USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case AVRISP_STRING_ID_Language:
-					Address = &AVRISP_LanguageString;
-					Size    = pgm_read_byte(&AVRISP_LanguageString.Header.Size);
-					break;
-				case AVRISP_STRING_ID_Manufacturer:
-					Address = &AVRISP_ManufacturerString;
-					Size    = pgm_read_byte(&AVRISP_ManufacturerString.Header.Size);
-					break;
-				case AVRISP_STRING_ID_Product:
-					Address = &AVRISP_ProductString;
-					Size    = pgm_read_byte(&AVRISP_ProductString.Header.Size);
-					break;
-				case AVRISP_STRING_ID_Serial:
-					Address = &AVRISP_SerialString;
-					Size    = AVRISP_SerialString.Header.Size;
-
-					/* Update serial number to have a different serial based on the current endpoint address */
-					((uint16_t*)&AVRISP_SerialString.UnicodeString)[6] = cpu_to_le16('0' + (AVRISP_DATA_IN_EPADDR & ENDPOINT_EPNUM_MASK));
-
-					*DescriptorMemorySpace = MEMSPACE_RAM;
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
-#if defined(RESET_TOGGLES_LIBUSB_COMPAT) || defined(__DOXYGEN__)
-/** Checks the state of the system status register MCUSR and indicates via a flag if
- *  the current AVRISP driver compatibility mode needs to be reset.
- *
- *  When the \c RESET_TOGGLES_LIBUSB_COMPAT compile time option is enabled, pulling
- *  the reset line of the AVR low will toggle between Jungo and libUSB compatibility
- *  modes. Other forms of reset (such as power on or watchdog) will not force a mode
- *  change.
- */
-void CheckExternalReset(void)
-{
-	/* If an external reset occurred, we need to change compatibility mode */
-	AVRISP_NeedCompatibilitySwitch = (MCUSR == (1 << EXTRF));
-
-	MCUSR = 0;
-}
-
-/** Updates the device descriptors so that the correct compatibility mode is used
- *  when the \c RESET_TOGGLES_LIBUSB_COMPAT compile time option is enabled. This
- *  configures the programmer for either Jungo or libUSB driver compatibility. Each
- *  time the AVR is reset via pulling the reset line low the compatibility mode will
- *  be toggled. The current mode is stored in EEPROM and preserved through power
- *  cycles of the AVR.
- */
-void UpdateCurrentCompatibilityMode(void)
-{
-	/* Load the current IN endpoint address stored in EEPROM */
-	AVRISP_CurrDataINEndpointAddress = eeprom_read_byte(&AVRISP_CurrDataINEndpointAddress_EEPROM);
-
-	/* Check if we need to switch compatibility modes */
-	if (AVRISP_NeedCompatibilitySwitch)
-	{
-		/* Toggle between compatibility modes */
-		AVRISP_CurrDataINEndpointAddress = (AVRISP_CurrDataINEndpointAddress == AVRISP_DATA_IN_EPADDR_LIBUSB) ?
-				AVRISP_DATA_IN_EPADDR_JUNGO : AVRISP_DATA_IN_EPADDR_LIBUSB;
-
-		/* Save the new mode into EEPROM */
-		eeprom_update_byte(&AVRISP_CurrDataINEndpointAddress_EEPROM, AVRISP_CurrDataINEndpointAddress);
-	}
-
-	LEDs_SetAllLEDs(LEDS_NO_LEDS);
-
-	/* Validate IN endpoint address and indicate current mode via LED flashes */
-	switch (AVRISP_CurrDataINEndpointAddress)
-	{
-		default:
-			/* Default to Jungo compatibility mode if saved EEPROM is invalid */
-			AVRISP_CurrDataINEndpointAddress = AVRISP_DATA_IN_EPADDR_JUNGO;
-		case AVRISP_DATA_IN_EPADDR_JUNGO:
-			/* Two flashes for Jungo compatibility mode */
-			for (uint8_t i = 0; i < 4; i++)
-			{
-				LEDs_ToggleLEDs(LEDS_ALL_LEDS);
-				Delay_MS(100);
-			}
-			break;
-		case AVRISP_DATA_IN_EPADDR_LIBUSB:
-			/* Five flashes for libUSB compatibility mode */
-			for (uint8_t i = 0; i < 10; i++)
-			{
-				LEDs_ToggleLEDs(LEDS_ALL_LEDS);
-				Delay_MS(100);
-			}
-			break;
-	}
-
-	Delay_MS(500);
-}
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISPDescriptors.h b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISPDescriptors.h
deleted file mode 100644
index 40d711387c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/AVRISPDescriptors.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Preprocessor Checks: */
-		#if defined(LIBUSB_DRIVER_COMPAT) && defined(RESET_TOGGLES_LIBUSB_COMPAT)
-			#error LIBUSB_DRIVER_COMPAT and RESET_TOGGLES_LIBUSB_COMPAT are mutually exclusive.
-		#endif
-
-	/* Macros: */
-		/** Endpoint address of the AVRISP data OUT endpoint. */
-		#define AVRISP_DATA_OUT_EPADDR         (ENDPOINT_DIR_OUT | 2)
-
-		/** Endpoint address of the AVRISP data IN endpoint, when in Jungo driver compatibility mode. */
-		#define AVRISP_DATA_IN_EPADDR_JUNGO    (ENDPOINT_DIR_IN  | 2)
-
-		/** Endpoint address of the AVRISP data IN endpoint, when in LibUSB driver compatibility mode. */
-		#define AVRISP_DATA_IN_EPADDR_LIBUSB   (ENDPOINT_DIR_IN  | 3)
-
-		#if defined(RESET_TOGGLES_LIBUSB_COMPAT)
-			#define AVRISP_DATA_IN_EPADDR      AVRISP_CurrDataINEndpointAddress
-		#elif defined(LIBUSB_DRIVER_COMPAT)
-			#define AVRISP_DATA_IN_EPADDR      AVRISP_DATA_IN_EPADDR_LIBUSB
-		#else
-			/** Endpoint address of the AVRISP data IN endpoint. */
-			#define AVRISP_DATA_IN_EPADDR      AVRISP_DATA_IN_EPADDR_JUNGO
-		#endif
-
-		/** Size in bytes of the AVRISP data endpoint. */
-		#define AVRISP_DATA_EPSIZE             64
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t    Config;
-
-			// Atmel AVRISP-MKII Interface
-			USB_Descriptor_Interface_t               AVRISP_Interface;
-			USB_Descriptor_Endpoint_t                AVRISP_DataInEndpoint;
-			USB_Descriptor_Endpoint_t                AVRISP_DataOutEndpoint;
-		} AVRISP_USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_AVRISP = 0, /**< AVRISP interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum AVRISP_StringDescriptors_t
-		{
-			AVRISP_STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			AVRISP_STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			AVRISP_STRING_ID_Product      = 2, /**< Product string ID */
-			AVRISP_STRING_ID_Serial       = 3, /**< Serial number string ID */
-		};
-
-	/* External Variables: */
-		#if defined(RESET_TOGGLES_LIBUSB_COMPAT)
-			extern uint8_t AVRISP_CurrDataINEndpointAddress;
-		#endif
-
-	/* Function Prototypes: */
-		uint16_t AVRISP_GetDescriptor(const uint16_t wValue,
-		                              const uint8_t wIndex,
-		                              const void** const DescriptorAddress,
-		                              uint8_t* const DescriptorMemorySpace)
-		                              ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3) ATTR_NON_NULL_PTR_ARG(4);
-
-		#if defined(RESET_TOGGLES_LIBUSB_COMPAT)
-		void CheckExternalReset(void) ATTR_NAKED ATTR_INIT_SECTION(3);
-		void UpdateCurrentCompatibilityMode(void);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Config/AppConfig.h
deleted file mode 100644
index 979b354c44..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Config/AppConfig.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define AUX_LINE_PORT              PORTB
-	#define AUX_LINE_PIN               PINB
-	#define AUX_LINE_DDR               DDRB
-	#if (BOARD == BOARD_U2S)
-		#define AUX_LINE_MASK          (1 << 0)
-	#else
-		#define AUX_LINE_MASK          (1 << 4)
-	#endif
-
-	#define ENABLE_ISP_PROTOCOL
-	#define ENABLE_XPROG_PROTOCOL
-
-	#define VTARGET_ADC_CHANNEL        2
-	#define VTARGET_REF_VOLTS          5
-	#define VTARGET_SCALE_FACTOR       1
-//	#define VTARGET_USE_INTERNAL_REF
-//	#define NO_VTARGET_DETECT
-//	#define XCK_RESCUE_CLOCK_ENABLE
-//	#define INVERTED_ISP_MISO
-
-	#define LIBUSB_DRIVER_COMPAT
-//	#define RESET_TOGGLES_LIBUSB_COMPAT
-//	#define FIRMWARE_VERSION_MINOR     0x11
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Config/LUFAConfig.h
deleted file mode 100644
index 9c1715cedf..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      16
-		#define DEVICE_STATE_AS_GPIOR            0
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-		#define NO_DEVICE_REMOTE_WAKEUP
-		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
deleted file mode 100644
index 60552564ef..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
+++ /dev/null
@@ -1,531 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  ISP Protocol handler, to process V2 Protocol wrapped ISP commands used in Atmel programmer devices.
- */
-
-#include "ISPProtocol.h"
-
-#if defined(ENABLE_ISP_PROTOCOL) || defined(__DOXYGEN__)
-
-/** Handler for the CMD_ENTER_PROGMODE_ISP command, which attempts to enter programming mode on
- *  the attached device, returning success or failure back to the host.
- */
-void ISPProtocol_EnterISPMode(void)
-{
-	struct
-	{
-		uint8_t TimeoutMS;
-		uint8_t PinStabDelayMS;
-		uint8_t ExecutionDelayMS;
-		uint8_t SynchLoops;
-		uint8_t ByteDelay;
-		uint8_t PollValue;
-		uint8_t PollIndex;
-		uint8_t EnterProgBytes[4];
-	} Enter_ISP_Params;
-
-	Endpoint_Read_Stream_LE(&Enter_ISP_Params, sizeof(Enter_ISP_Params), NULL);
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	uint8_t ResponseStatus = STATUS_CMD_FAILED;
-
-	CurrentAddress = 0;
-
-	/* Perform execution delay, initialize SPI bus */
-	ISPProtocol_DelayMS(Enter_ISP_Params.ExecutionDelayMS);
-	ISPTarget_EnableTargetISP();
-
-	ISPTarget_ChangeTargetResetLine(true);
-	ISPProtocol_DelayMS(Enter_ISP_Params.PinStabDelayMS);
-
-	/* Continuously attempt to synchronize with the target until either the number of attempts specified
-	 * by the host has exceeded, or the the device sends back the expected response values */
-	while (Enter_ISP_Params.SynchLoops-- && TimeoutTicksRemaining)
-	{
-		uint8_t ResponseBytes[4];
-
-		for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++)
-		{
-			ISPProtocol_DelayMS(Enter_ISP_Params.ByteDelay);
-			ResponseBytes[RByte] = ISPTarget_TransferByte(Enter_ISP_Params.EnterProgBytes[RByte]);
-		}
-
-		/* Check if polling disabled, or if the polled value matches the expected value */
-		if (!(Enter_ISP_Params.PollIndex) || (ResponseBytes[Enter_ISP_Params.PollIndex - 1] == Enter_ISP_Params.PollValue))
-		{
-			ResponseStatus = STATUS_CMD_OK;
-			break;
-		}
-		else
-		{
-			ISPTarget_ChangeTargetResetLine(false);
-			ISPProtocol_DelayMS(Enter_ISP_Params.PinStabDelayMS);
-			ISPTarget_ChangeTargetResetLine(true);
-			ISPProtocol_DelayMS(Enter_ISP_Params.PinStabDelayMS);
-		}
-	}
-
-	Endpoint_Write_8(CMD_ENTER_PROGMODE_ISP);
-	Endpoint_Write_8(ResponseStatus);
-	Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_LEAVE_ISP command, which releases the target from programming mode. */
-void ISPProtocol_LeaveISPMode(void)
-{
-	struct
-	{
-		uint8_t PreDelayMS;
-		uint8_t PostDelayMS;
-	} Leave_ISP_Params;
-
-	Endpoint_Read_Stream_LE(&Leave_ISP_Params, sizeof(Leave_ISP_Params), NULL);
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	/* Perform pre-exit delay, release the target /RESET, disable the SPI bus and perform the post-exit delay */
-	ISPProtocol_DelayMS(Leave_ISP_Params.PreDelayMS);
-	ISPTarget_ChangeTargetResetLine(false);
-	ISPTarget_DisableTargetISP();
-	ISPProtocol_DelayMS(Leave_ISP_Params.PostDelayMS);
-
-	Endpoint_Write_8(CMD_LEAVE_PROGMODE_ISP);
-	Endpoint_Write_8(STATUS_CMD_OK);
-	Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_PROGRAM_FLASH_ISP and CMD_PROGRAM_EEPROM_ISP commands, writing out bytes,
- *  words or pages of data to the attached device.
- *
- *  \param[in] V2Command  Issued V2 Protocol command byte from the host
- */
-void ISPProtocol_ProgramMemory(uint8_t V2Command)
-{
-	struct
-	{
-		uint16_t BytesToWrite;
-		uint8_t  ProgrammingMode;
-		uint8_t  DelayMS;
-		uint8_t  ProgrammingCommands[3];
-		uint8_t  PollValue1;
-		uint8_t  PollValue2;
-		uint8_t  ProgData[256]; // Note, the Jungo driver has a very short ACK timeout period, need to buffer the
-	} Write_Memory_Params;      // whole page and ACK the packet as fast as possible to prevent it from aborting
-
-	Endpoint_Read_Stream_LE(&Write_Memory_Params, (sizeof(Write_Memory_Params) -
-	                                               sizeof(Write_Memory_Params.ProgData)), NULL);
-	Write_Memory_Params.BytesToWrite = SwapEndian_16(Write_Memory_Params.BytesToWrite);
-
-	if (Write_Memory_Params.BytesToWrite > sizeof(Write_Memory_Params.ProgData))
-	{
-		Endpoint_ClearOUT();
-		Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-		Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-		Endpoint_Write_8(V2Command);
-		Endpoint_Write_8(STATUS_CMD_FAILED);
-		Endpoint_ClearIN();
-		return;
-	}
-
-	Endpoint_Read_Stream_LE(&Write_Memory_Params.ProgData, Write_Memory_Params.BytesToWrite, NULL);
-
-	// The driver will terminate transfers that are a round multiple of the endpoint bank in size with a ZLP, need
-	// to catch this and discard it before continuing on with packet processing to prevent communication issues
-	if (((sizeof(uint8_t) + sizeof(Write_Memory_Params) - sizeof(Write_Memory_Params.ProgData)) +
-	    Write_Memory_Params.BytesToWrite) % AVRISP_DATA_EPSIZE == 0)
-	{
-		Endpoint_ClearOUT();
-		Endpoint_WaitUntilReady();
-	}
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	uint8_t  ProgrammingStatus = STATUS_CMD_OK;
-	uint8_t  PollValue         = (V2Command == CMD_PROGRAM_FLASH_ISP) ? Write_Memory_Params.PollValue1 :
-	                                                                    Write_Memory_Params.PollValue2;
-	uint16_t PollAddress       = 0;
-	uint8_t* NextWriteByte     = Write_Memory_Params.ProgData;
-	uint16_t PageStartAddress  = (CurrentAddress & 0xFFFF);
-
-	for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++)
-	{
-		uint8_t ByteToWrite     = *(NextWriteByte++);
-		uint8_t ProgrammingMode = Write_Memory_Params.ProgrammingMode;
-
-		/* Check to see if we need to send a LOAD EXTENDED ADDRESS command to the target */
-		if (MustLoadExtendedAddress)
-		{
-			ISPTarget_LoadExtendedAddress();
-			MustLoadExtendedAddress = false;
-		}
-
-		ISPTarget_SendByte(Write_Memory_Params.ProgrammingCommands[0]);
-		ISPTarget_SendByte(CurrentAddress >> 8);
-		ISPTarget_SendByte(CurrentAddress & 0xFF);
-		ISPTarget_SendByte(ByteToWrite);
-
-		/* AVR FLASH addressing requires us to modify the write command based on if we are writing a high
-		 * or low byte at the current word address */
-		if (V2Command == CMD_PROGRAM_FLASH_ISP)
-		  Write_Memory_Params.ProgrammingCommands[0] ^= READ_WRITE_HIGH_BYTE_MASK;
-
-		/* Check to see if we have a valid polling address */
-		if (!(PollAddress) && (ByteToWrite != PollValue))
-		{
-			if ((CurrentByte & 0x01) && (V2Command == CMD_PROGRAM_FLASH_ISP))
-			  Write_Memory_Params.ProgrammingCommands[2] |=  READ_WRITE_HIGH_BYTE_MASK;
-			else
-			  Write_Memory_Params.ProgrammingCommands[2] &= ~READ_WRITE_HIGH_BYTE_MASK;
-
-			PollAddress = (CurrentAddress & 0xFFFF);
-		}
-
-		/* If in word programming mode, commit the byte to the target's memory */
-		if (!(ProgrammingMode & PROG_MODE_PAGED_WRITES_MASK))
-		{
-			/* If the current polling address is invalid, switch to timed delay write completion mode */
-			if (!(PollAddress) && !(ProgrammingMode & PROG_MODE_WORD_READYBUSY_MASK))
-			  ProgrammingMode = (ProgrammingMode & ~PROG_MODE_WORD_VALUE_MASK) | PROG_MODE_WORD_TIMEDELAY_MASK;
-
-			ProgrammingStatus = ISPTarget_WaitForProgComplete(ProgrammingMode, PollAddress, PollValue,
-			                                                  Write_Memory_Params.DelayMS,
-			                                                  Write_Memory_Params.ProgrammingCommands[2]);
-
-			/* Abort the programming loop early if the byte/word programming failed */
-			if (ProgrammingStatus != STATUS_CMD_OK)
-			  break;
-
-			/* Must reset the polling address afterwards, so it is not erroneously used for the next byte */
-			PollAddress = 0;
-		}
-
-		/* EEPROM just increments the address each byte, flash needs to increment on each word and
-		 * also check to ensure that a LOAD EXTENDED ADDRESS command is issued each time the extended
-		 * address boundary has been crossed during FLASH memory programming */
-		if ((CurrentByte & 0x01) || (V2Command == CMD_PROGRAM_EEPROM_ISP))
-		{
-			CurrentAddress++;
-
-			if ((V2Command == CMD_PROGRAM_FLASH_ISP) && !(CurrentAddress & 0xFFFF))
-			  MustLoadExtendedAddress = true;
-		}
-	}
-
-	/* If the current page must be committed, send the PROGRAM PAGE command to the target */
-	if (Write_Memory_Params.ProgrammingMode & PROG_MODE_COMMIT_PAGE_MASK)
-	{
-		ISPTarget_SendByte(Write_Memory_Params.ProgrammingCommands[1]);
-		ISPTarget_SendByte(PageStartAddress >> 8);
-		ISPTarget_SendByte(PageStartAddress & 0xFF);
-		ISPTarget_SendByte(0x00);
-
-		/* Check if polling is enabled and possible, if not switch to timed delay mode */
-		if ((Write_Memory_Params.ProgrammingMode & PROG_MODE_PAGED_VALUE_MASK) && !(PollAddress))
-		{
-			Write_Memory_Params.ProgrammingMode = (Write_Memory_Params.ProgrammingMode & ~PROG_MODE_PAGED_VALUE_MASK) |
-												   PROG_MODE_PAGED_TIMEDELAY_MASK;
-		}
-
-		ProgrammingStatus = ISPTarget_WaitForProgComplete(Write_Memory_Params.ProgrammingMode, PollAddress, PollValue,
-		                                                  Write_Memory_Params.DelayMS,
-		                                                  Write_Memory_Params.ProgrammingCommands[2]);
-
-		/* Check to see if the FLASH address has crossed the extended address boundary */
-		if ((V2Command == CMD_PROGRAM_FLASH_ISP) && !(CurrentAddress & 0xFFFF))
-		  MustLoadExtendedAddress = true;
-	}
-
-	Endpoint_Write_8(V2Command);
-	Endpoint_Write_8(ProgrammingStatus);
-	Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_READ_FLASH_ISP and CMD_READ_EEPROM_ISP commands, reading in bytes,
- *  words or pages of data from the attached device.
- *
- *  \param[in] V2Command  Issued V2 Protocol command byte from the host
- */
-void ISPProtocol_ReadMemory(uint8_t V2Command)
-{
-	struct
-	{
-		uint16_t BytesToRead;
-		uint8_t  ReadMemoryCommand;
-	} Read_Memory_Params;
-
-	Endpoint_Read_Stream_LE(&Read_Memory_Params, sizeof(Read_Memory_Params), NULL);
-	Read_Memory_Params.BytesToRead = SwapEndian_16(Read_Memory_Params.BytesToRead);
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	Endpoint_Write_8(V2Command);
-	Endpoint_Write_8(STATUS_CMD_OK);
-
-	/* Read each byte from the device and write them to the packet for the host */
-	for (uint16_t CurrentByte = 0; CurrentByte < Read_Memory_Params.BytesToRead; CurrentByte++)
-	{
-		/* Check to see if we need to send a LOAD EXTENDED ADDRESS command to the target */
-		if (MustLoadExtendedAddress)
-		{
-			ISPTarget_LoadExtendedAddress();
-			MustLoadExtendedAddress = false;
-		}
-
-		/* Read the next byte from the desired memory space in the device */
-		ISPTarget_SendByte(Read_Memory_Params.ReadMemoryCommand);
-		ISPTarget_SendByte(CurrentAddress >> 8);
-		ISPTarget_SendByte(CurrentAddress & 0xFF);
-		Endpoint_Write_8(ISPTarget_ReceiveByte());
-
-		/* Check if the endpoint bank is currently full, if so send the packet */
-		if (!(Endpoint_IsReadWriteAllowed()))
-		{
-			Endpoint_ClearIN();
-			Endpoint_WaitUntilReady();
-		}
-
-		/* AVR FLASH addressing requires us to modify the read command based on if we are reading a high
-		 * or low byte at the current word address */
-		if (V2Command == CMD_READ_FLASH_ISP)
-		  Read_Memory_Params.ReadMemoryCommand ^= READ_WRITE_HIGH_BYTE_MASK;
-
-		/* EEPROM just increments the address each byte, flash needs to increment on each word and
-		 * also check to ensure that a LOAD EXTENDED ADDRESS command is issued each time the extended
-		 * address boundary has been crossed */
-		if ((CurrentByte & 0x01) || (V2Command == CMD_READ_EEPROM_ISP))
-		{
-			CurrentAddress++;
-
-			if ((V2Command != CMD_READ_EEPROM_ISP) && !(CurrentAddress & 0xFFFF))
-			  MustLoadExtendedAddress = true;
-		}
-	}
-
-	Endpoint_Write_8(STATUS_CMD_OK);
-
-	bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed());
-	Endpoint_ClearIN();
-
-	/* Ensure last packet is a short packet to terminate the transfer */
-	if (IsEndpointFull)
-	{
-		Endpoint_WaitUntilReady();
-		Endpoint_ClearIN();
-		Endpoint_WaitUntilReady();
-	}
-}
-
-/** Handler for the CMD_CHI_ERASE_ISP command, clearing the target's FLASH memory. */
-void ISPProtocol_ChipErase(void)
-{
-	struct
-	{
-		uint8_t EraseDelayMS;
-		uint8_t PollMethod;
-		uint8_t EraseCommandBytes[4];
-	} Erase_Chip_Params;
-
-	Endpoint_Read_Stream_LE(&Erase_Chip_Params, sizeof(Erase_Chip_Params), NULL);
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	uint8_t ResponseStatus = STATUS_CMD_OK;
-
-	/* Send the chip erase commands as given by the host to the device */
-	for (uint8_t SByte = 0; SByte < sizeof(Erase_Chip_Params.EraseCommandBytes); SByte++)
-	  ISPTarget_SendByte(Erase_Chip_Params.EraseCommandBytes[SByte]);
-
-	/* Use appropriate command completion check as given by the host (delay or busy polling) */
-	if (!(Erase_Chip_Params.PollMethod))
-	  ISPProtocol_DelayMS(Erase_Chip_Params.EraseDelayMS);
-	else
-	  ResponseStatus = ISPTarget_WaitWhileTargetBusy();
-
-	Endpoint_Write_8(CMD_CHIP_ERASE_ISP);
-	Endpoint_Write_8(ResponseStatus);
-	Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_READ_FUSE_ISP, CMD_READ_LOCK_ISP, CMD_READ_SIGNATURE_ISP and CMD_READ_OSCCAL commands,
- *  reading the requested configuration byte from the device.
- *
- *  \param[in] V2Command  Issued V2 Protocol command byte from the host
- */
-void ISPProtocol_ReadFuseLockSigOSCCAL(uint8_t V2Command)
-{
-	struct
-	{
-		uint8_t RetByte;
-		uint8_t ReadCommandBytes[4];
-	} Read_FuseLockSigOSCCAL_Params;
-
-	Endpoint_Read_Stream_LE(&Read_FuseLockSigOSCCAL_Params, sizeof(Read_FuseLockSigOSCCAL_Params), NULL);
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	uint8_t ResponseBytes[4];
-
-	/* Send the Fuse or Lock byte read commands as given by the host to the device, store response */
-	for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++)
-	  ResponseBytes[RByte] = ISPTarget_TransferByte(Read_FuseLockSigOSCCAL_Params.ReadCommandBytes[RByte]);
-
-	Endpoint_Write_8(V2Command);
-	Endpoint_Write_8(STATUS_CMD_OK);
-	Endpoint_Write_8(ResponseBytes[Read_FuseLockSigOSCCAL_Params.RetByte - 1]);
-	Endpoint_Write_8(STATUS_CMD_OK);
-	Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_WRITE_FUSE_ISP and CMD_WRITE_LOCK_ISP commands, writing the requested configuration
- *  byte to the device.
- *
- *  \param[in] V2Command  Issued V2 Protocol command byte from the host
- */
-void ISPProtocol_WriteFuseLock(uint8_t V2Command)
-{
-	struct
-	{
-		uint8_t WriteCommandBytes[4];
-	} Write_FuseLockSig_Params;
-
-	Endpoint_Read_Stream_LE(&Write_FuseLockSig_Params, sizeof(Write_FuseLockSig_Params), NULL);
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	/* Send the Fuse or Lock byte program commands as given by the host to the device */
-	for (uint8_t SByte = 0; SByte < sizeof(Write_FuseLockSig_Params.WriteCommandBytes); SByte++)
-	  ISPTarget_SendByte(Write_FuseLockSig_Params.WriteCommandBytes[SByte]);
-
-	Endpoint_Write_8(V2Command);
-	Endpoint_Write_8(STATUS_CMD_OK);
-	Endpoint_Write_8(STATUS_CMD_OK);
-	Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_SPI_MULTI command, writing and reading arbitrary SPI data to and from the attached device. */
-void ISPProtocol_SPIMulti(void)
-{
-	struct
-	{
-		uint8_t TxBytes;
-		uint8_t RxBytes;
-		uint8_t RxStartAddr;
-		uint8_t TxData[255];
-	} SPI_Multi_Params;
-
-	Endpoint_Read_Stream_LE(&SPI_Multi_Params, (sizeof(SPI_Multi_Params) - sizeof(SPI_Multi_Params.TxData)), NULL);
-	Endpoint_Read_Stream_LE(&SPI_Multi_Params.TxData, SPI_Multi_Params.TxBytes, NULL);
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	Endpoint_Write_8(CMD_SPI_MULTI);
-	Endpoint_Write_8(STATUS_CMD_OK);
-
-	uint8_t CurrTxPos = 0;
-	uint8_t CurrRxPos = 0;
-
-	/* Write out bytes to transmit until the start of the bytes to receive is met */
-	while (CurrTxPos < SPI_Multi_Params.RxStartAddr)
-	{
-		if (CurrTxPos < SPI_Multi_Params.TxBytes)
-		  ISPTarget_SendByte(SPI_Multi_Params.TxData[CurrTxPos]);
-		else
-		  ISPTarget_SendByte(0);
-
-		CurrTxPos++;
-	}
-
-	/* Transmit remaining bytes with padding as needed, read in response bytes */
-	while (CurrRxPos < SPI_Multi_Params.RxBytes)
-	{
-		if (CurrTxPos < SPI_Multi_Params.TxBytes)
-		  Endpoint_Write_8(ISPTarget_TransferByte(SPI_Multi_Params.TxData[CurrTxPos++]));
-		else
-		  Endpoint_Write_8(ISPTarget_ReceiveByte());
-
-		/* Check to see if we have filled the endpoint bank and need to send the packet */
-		if (!(Endpoint_IsReadWriteAllowed()))
-		{
-			Endpoint_ClearIN();
-			Endpoint_WaitUntilReady();
-		}
-
-		CurrRxPos++;
-	}
-
-	Endpoint_Write_8(STATUS_CMD_OK);
-
-	bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed());
-	Endpoint_ClearIN();
-
-	/* Ensure last packet is a short packet to terminate the transfer */
-	if (IsEndpointFull)
-	{
-		Endpoint_WaitUntilReady();
-		Endpoint_ClearIN();
-		Endpoint_WaitUntilReady();
-	}
-}
-
-/** Blocking delay for a given number of milliseconds. This provides a simple wrapper around
- *  the avr-libc provided delay function, so that the delay function can be called with a
- *  constant value (to prevent run-time floating point operations being required).
- *
- *  \param[in] DelayMS  Number of milliseconds to delay for
- */
-void ISPProtocol_DelayMS(uint8_t DelayMS)
-{
-	while (DelayMS-- && TimeoutTicksRemaining)
-	  Delay_MS(1);
-}
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h
deleted file mode 100644
index 29d2bf747a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ISPProtocol.c.
- */
-
-#ifndef _ISP_PROTOCOL_
-#define _ISP_PROTOCOL_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <util/delay.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "../V2Protocol.h"
-		#include "Config/AppConfig.h"
-
-	/* Preprocessor Checks: */
-		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
-			#undef ENABLE_ISP_PROTOCOL
-
-			#if !defined(ENABLE_XPROG_PROTOCOL)
-				#define ENABLE_XPROG_PROTOCOL
-			#endif
-		#endif
-
-	/* Macros: */
-		/** Mask for the reading or writing of the high byte in a FLASH word when issuing a low-level programming command. */
-		#define READ_WRITE_HIGH_BYTE_MASK       (1 << 3)
-
-		#define PROG_MODE_PAGED_WRITES_MASK     (1 << 0)
-		#define PROG_MODE_WORD_TIMEDELAY_MASK   (1 << 1)
-		#define PROG_MODE_WORD_VALUE_MASK       (1 << 2)
-		#define PROG_MODE_WORD_READYBUSY_MASK   (1 << 3)
-		#define PROG_MODE_PAGED_TIMEDELAY_MASK  (1 << 4)
-		#define PROG_MODE_PAGED_VALUE_MASK      (1 << 5)
-		#define PROG_MODE_PAGED_READYBUSY_MASK  (1 << 6)
-		#define PROG_MODE_COMMIT_PAGE_MASK      (1 << 7)
-
-	/* Function Prototypes: */
-		void ISPProtocol_EnterISPMode(void);
-		void ISPProtocol_LeaveISPMode(void);
-		void ISPProtocol_ProgramMemory(const uint8_t V2Command);
-		void ISPProtocol_ReadMemory(const uint8_t V2Command);
-		void ISPProtocol_ChipErase(void);
-		void ISPProtocol_ReadFuseLockSigOSCCAL(const uint8_t V2Command);
-		void ISPProtocol_WriteFuseLock(const uint8_t V2Command);
-		void ISPProtocol_SPIMulti(void);
-		void ISPProtocol_DelayMS(uint8_t DelayMS);
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
deleted file mode 100644
index 6cfe01708d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Target-related functions for the ISP Protocol decoder.
- */
-
-#include "ISPTarget.h"
-
-#if defined(ENABLE_ISP_PROTOCOL) || defined(__DOXYGEN__)
-
-/** List of hardware SPI prescaler masks for possible AVRStudio ISP programming speeds.
- *
- *  \hideinitializer
- */
-static const uint8_t SPIMaskFromSCKDuration[] PROGMEM =
-{
-#if (F_CPU == 8000000)
-	SPI_SPEED_FCPU_DIV_2,    // AVRStudio =   8MHz SPI, Actual =   4MHz SPI
-	SPI_SPEED_FCPU_DIV_2,    // AVRStudio =   4MHz SPI, Actual =   4MHz SPI
-	SPI_SPEED_FCPU_DIV_4,    // AVRStudio =   2MHz SPI, Actual =   2MHz SPI
-	SPI_SPEED_FCPU_DIV_8,    // AVRStudio =   1MHz SPI, Actual =   1MHz SPI
-	SPI_SPEED_FCPU_DIV_16,   // AVRStudio = 500KHz SPI, Actual = 500KHz SPI
-	SPI_SPEED_FCPU_DIV_32,   // AVRStudio = 250KHz SPI, Actual = 250KHz SPI
-	SPI_SPEED_FCPU_DIV_64,   // AVRStudio = 125KHz SPI, Actual = 125KHz SPI
-#elif (F_CPU == 16000000)
-	SPI_SPEED_FCPU_DIV_2,    // AVRStudio =   8MHz SPI, Actual =   8MHz SPI
-	SPI_SPEED_FCPU_DIV_4,    // AVRStudio =   4MHz SPI, Actual =   4MHz SPI
-	SPI_SPEED_FCPU_DIV_8,    // AVRStudio =   2MHz SPI, Actual =   2MHz SPI
-	SPI_SPEED_FCPU_DIV_16,   // AVRStudio =   1MHz SPI, Actual =   1MHz SPI
-	SPI_SPEED_FCPU_DIV_32,   // AVRStudio = 500KHz SPI, Actual = 500KHz SPI
-	SPI_SPEED_FCPU_DIV_64,   // AVRStudio = 250KHz SPI, Actual = 250KHz SPI
-	SPI_SPEED_FCPU_DIV_128   // AVRStudio = 125KHz SPI, Actual = 125KHz SPI
-#else
-	#error No SPI prescaler masks for chosen F_CPU speed.
-#endif
-};
-
-/** Lookup table to convert the slower ISP speeds into a compare value for the software SPI driver.
- *
- *  \hideinitializer
- */
-static const uint16_t TimerCompareFromSCKDuration[] PROGMEM =
-{
-	TIMER_COMP(96386), TIMER_COMP(89888), TIMER_COMP(84211), TIMER_COMP(79208), TIMER_COMP(74767),
-	TIMER_COMP(70797), TIMER_COMP(67227), TIMER_COMP(64000), TIMER_COMP(61069), TIMER_COMP(58395),
-	TIMER_COMP(55945), TIMER_COMP(51613), TIMER_COMP(49690), TIMER_COMP(47905), TIMER_COMP(46243),
-	TIMER_COMP(43244), TIMER_COMP(41885), TIMER_COMP(39409), TIMER_COMP(38278), TIMER_COMP(36200),
-	TIMER_COMP(34335), TIMER_COMP(32654), TIMER_COMP(31129), TIMER_COMP(29740), TIMER_COMP(28470),
-	TIMER_COMP(27304), TIMER_COMP(25724), TIMER_COMP(24768), TIMER_COMP(23461), TIMER_COMP(22285),
-	TIMER_COMP(21221), TIMER_COMP(20254), TIMER_COMP(19371), TIMER_COMP(18562), TIMER_COMP(17583),
-	TIMER_COMP(16914), TIMER_COMP(16097), TIMER_COMP(15356), TIMER_COMP(14520), TIMER_COMP(13914),
-	TIMER_COMP(13224), TIMER_COMP(12599), TIMER_COMP(12031), TIMER_COMP(11511), TIMER_COMP(10944),
-	TIMER_COMP(10431), TIMER_COMP(9963),  TIMER_COMP(9468),  TIMER_COMP(9081),  TIMER_COMP(8612),
-	TIMER_COMP(8239),  TIMER_COMP(7851),  TIMER_COMP(7498),  TIMER_COMP(7137),  TIMER_COMP(6809),
-	TIMER_COMP(6478),  TIMER_COMP(6178),  TIMER_COMP(5879),  TIMER_COMP(5607),  TIMER_COMP(5359),
-	TIMER_COMP(5093),  TIMER_COMP(4870),  TIMER_COMP(4633),  TIMER_COMP(4418),  TIMER_COMP(4209),
-	TIMER_COMP(4019),  TIMER_COMP(3823),  TIMER_COMP(3645),  TIMER_COMP(3474),  TIMER_COMP(3310),
-	TIMER_COMP(3161),  TIMER_COMP(3011),  TIMER_COMP(2869),  TIMER_COMP(2734),  TIMER_COMP(2611),
-	TIMER_COMP(2484),  TIMER_COMP(2369),  TIMER_COMP(2257),  TIMER_COMP(2152),  TIMER_COMP(2052),
-	TIMER_COMP(1956),  TIMER_COMP(1866),  TIMER_COMP(1779),  TIMER_COMP(1695),  TIMER_COMP(1615),
-	TIMER_COMP(1539),  TIMER_COMP(1468),  TIMER_COMP(1398),  TIMER_COMP(1333),  TIMER_COMP(1271),
-	TIMER_COMP(1212),  TIMER_COMP(1155),  TIMER_COMP(1101),  TIMER_COMP(1049),  TIMER_COMP(1000),
-	TIMER_COMP(953),   TIMER_COMP(909),   TIMER_COMP(866),   TIMER_COMP(826),   TIMER_COMP(787),
-	TIMER_COMP(750),   TIMER_COMP(715),   TIMER_COMP(682),   TIMER_COMP(650),   TIMER_COMP(619),
-	TIMER_COMP(590),   TIMER_COMP(563),   TIMER_COMP(536),   TIMER_COMP(511),   TIMER_COMP(487),
-	TIMER_COMP(465),   TIMER_COMP(443),   TIMER_COMP(422),   TIMER_COMP(402),   TIMER_COMP(384),
-	TIMER_COMP(366),   TIMER_COMP(349),   TIMER_COMP(332),   TIMER_COMP(317),   TIMER_COMP(302),
-	TIMER_COMP(288),   TIMER_COMP(274),   TIMER_COMP(261),   TIMER_COMP(249),   TIMER_COMP(238),
-	TIMER_COMP(226),   TIMER_COMP(216),   TIMER_COMP(206),   TIMER_COMP(196),   TIMER_COMP(187),
-	TIMER_COMP(178),   TIMER_COMP(170),   TIMER_COMP(162),   TIMER_COMP(154),   TIMER_COMP(147),
-	TIMER_COMP(140),   TIMER_COMP(134),   TIMER_COMP(128),   TIMER_COMP(122),   TIMER_COMP(116),
-	TIMER_COMP(111),   TIMER_COMP(105),   TIMER_COMP(100),   TIMER_COMP(95.4),  TIMER_COMP(90.9),
-	TIMER_COMP(86.6),  TIMER_COMP(82.6),  TIMER_COMP(78.7),  TIMER_COMP(75.0),  TIMER_COMP(71.5),
-	TIMER_COMP(68.2),  TIMER_COMP(65.0),  TIMER_COMP(61.9),  TIMER_COMP(59.0),  TIMER_COMP(56.3),
-	TIMER_COMP(53.6),  TIMER_COMP(51.1)
-};
-
-/** Currently selected SPI driver, either hardware (for fast ISP speeds) or software (for slower ISP speeds). */
-bool HardwareSPIMode = true;
-
-/** Software SPI data register for sending and receiving */
-static volatile uint8_t SoftSPI_Data;
-
-/** Number of bits left to transfer in the software SPI driver */
-static volatile uint8_t SoftSPI_BitsRemaining;
-
-
-/** ISR to handle software SPI transmission and reception */
-ISR(TIMER1_COMPA_vect, ISR_BLOCK)
-{
-	/* Check if rising edge (output next bit) or falling edge (read in next bit) */
-	if (!(PINB & (1 << 1)))
-	{
-		if (SoftSPI_Data & (1 << 7))
-		  PORTB |=  (1 << 2);
-		else
-		  PORTB &= ~(1 << 2);
-	}
-	else
-	{
-		SoftSPI_Data <<= 1;
-
-		if (!(--SoftSPI_BitsRemaining))
-		{
-			TCCR1B = 0;
-			TIFR1  = (1 << OCF1A);
-		}
-
-		if (PINB & (1 << 3))
-		  SoftSPI_Data |= (1 << 0);
-	}
-
-	/* Fast toggle of PORTB.1 via the PIN register (see datasheet) */
-	PINB |= (1 << 1);
-}
-
-/** Initializes the appropriate SPI driver (hardware or software, depending on the selected ISP speed) ready for
- *  communication with the attached target.
- */
-void ISPTarget_EnableTargetISP(void)
-{
-	uint8_t SCKDuration = V2Params_GetParameterValue(PARAM_SCK_DURATION);
-
-	if (SCKDuration < sizeof(SPIMaskFromSCKDuration))
-	{
-		HardwareSPIMode = true;
-
-		SPI_Init(pgm_read_byte(&SPIMaskFromSCKDuration[SCKDuration]) | SPI_ORDER_MSB_FIRST |
-		                       SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING | SPI_MODE_MASTER);
-	}
-	else
-	{
-		HardwareSPIMode = false;
-
-		DDRB  |= ((1 << 1) | (1 << 2));
-		PORTB |= ((1 << 0) | (1 << 3));
-
-		ISPTarget_ConfigureSoftwareSPI(SCKDuration);
-	}
-}
-
-/** Shuts down the current selected SPI driver (hardware or software, depending on the selected ISP speed) so that no
- *  further communications can occur until the driver is re-initialized.
- */
-void ISPTarget_DisableTargetISP(void)
-{
-	if (HardwareSPIMode)
-	{
-		SPI_Disable();
-	}
-	else
-	{
-		DDRB  &= ~((1 << 1) | (1 << 2));
-		PORTB &= ~((1 << 0) | (1 << 3));
-
-		/* Must re-enable rescue clock once software ISP has exited, as the timer for the rescue clock is
-		 * re-purposed for software SPI */
-		ISPTarget_ConfigureRescueClock();
-	}
-}
-
-/** Configures the AVR to produce a 4MHz rescue clock out of the OCR1A pin of the AVR, so
- *  that it can be fed into the XTAL1 pin of an AVR whose fuses have been mis-configured for
- *  an external clock rather than a crystal. When used, the ISP speed must be 125KHz for this
- *  functionality to work correctly.
- */
-void ISPTarget_ConfigureRescueClock(void)
-{
-	#if defined(XCK_RESCUE_CLOCK_ENABLE)
-		/* Configure XCK as an output for the specified AVR model */
-		DDRD  |= (1 << 5);
-
-		/* Start USART to generate a 4MHz clock on the XCK pin */
-		UBRR1  = ((F_CPU / 2 / ISP_RESCUE_CLOCK_SPEED) - 1);
-		UCSR1B = (1 << TXEN1);
-		UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
-	#else
-		/* Configure OCR1A as an output for the specified AVR model */
-		#if defined(USB_SERIES_2_AVR)
-		DDRC |= (1 << 6);
-		#else
-		DDRB |= (1 << 5);
-		#endif
-
-		/* Start Timer 1 to generate a 4MHz clock on the OCR1A pin */
-		TIMSK1 = 0;
-		TCNT1  = 0;
-		OCR1A  = ((F_CPU / 2 / ISP_RESCUE_CLOCK_SPEED) - 1);
-		TCCR1A = (1 << COM1A0);
-		TCCR1B = ((1 << WGM12) | (1 << CS10));
-	#endif
-}
-
-/** Configures the AVR's timer ready to produce software SPI for the slower ISP speeds that
- *  cannot be obtained when using the AVR's hardware SPI module.
- *
- *  \param[in] SCKDuration  Duration of the desired software ISP SCK clock
- */
-void ISPTarget_ConfigureSoftwareSPI(const uint8_t SCKDuration)
-{
-	/* Configure Timer 1 for software SPI using the specified SCK duration */
-	TIMSK1 = (1 << OCIE1A);
-	TCNT1  = 0;
-	OCR1A  = pgm_read_word(&TimerCompareFromSCKDuration[SCKDuration - sizeof(SPIMaskFromSCKDuration)]);
-	TCCR1A = 0;
-	TCCR1B = 0;
-}
-
-/** Sends and receives a single byte of data to and from the attached target via software SPI.
- *
- *  \param[in] Byte  Byte of data to send to the attached target
- *
- *  \return Received byte of data from the attached target
- */
-uint8_t ISPTarget_TransferSoftSPIByte(const uint8_t Byte)
-{
-	SoftSPI_Data          = Byte;
-	SoftSPI_BitsRemaining = 8;
-
-	/* Set initial MOSI pin state according to the byte to be transferred */
-	if (SoftSPI_Data & (1 << 7))
-	  PORTB |=  (1 << 2);
-	else
-	  PORTB &= ~(1 << 2);
-
-	TCNT1  = 0;
-	TCCR1B = ((1 << WGM12) | (1 << CS11));
-	while (SoftSPI_BitsRemaining && TimeoutTicksRemaining);
-	TCCR1B = 0;
-
-	return SoftSPI_Data;
-}
-
-/** Asserts or deasserts the target's reset line, using the correct polarity as set by the host using a SET PARAM command.
- *  When not asserted, the line is tristated so as not to interfere with normal device operation.
- *
- *  \param[in] ResetTarget  Boolean true when the target should be held in reset, \c false otherwise
- */
-void ISPTarget_ChangeTargetResetLine(const bool ResetTarget)
-{
-	if (ResetTarget)
-	{
-		AUX_LINE_DDR |= AUX_LINE_MASK;
-
-		if (!(V2Params_GetParameterValue(PARAM_RESET_POLARITY)))
-		  AUX_LINE_PORT |=  AUX_LINE_MASK;
-		else
-		  AUX_LINE_PORT &= ~AUX_LINE_MASK;
-	}
-	else
-	{
-		AUX_LINE_DDR  &= ~AUX_LINE_MASK;
-		AUX_LINE_PORT &= ~AUX_LINE_MASK;
-	}
-}
-
-/** Waits until the target has completed the last operation, by continuously polling the device's
- *  BUSY flag until it is cleared, or until the command timeout period has expired.
- *
- *  \return V2 Protocol status \ref STATUS_CMD_OK if the no timeout occurred, \ref STATUS_RDY_BSY_TOUT otherwise
- */
-uint8_t ISPTarget_WaitWhileTargetBusy(void)
-{
-	do
-	{
-		ISPTarget_SendByte(0xF0);
-		ISPTarget_SendByte(0x00);
-		ISPTarget_SendByte(0x00);
-	}
-	while ((ISPTarget_ReceiveByte() & 0x01) && TimeoutTicksRemaining);
-
-	return (TimeoutTicksRemaining > 0) ? STATUS_CMD_OK : STATUS_RDY_BSY_TOUT;
-}
-
-/** Sends a low-level LOAD EXTENDED ADDRESS command to the target, for addressing of memory beyond the
- *  64KB boundary. This sends the command with the correct address as indicated by the current address
- *  pointer variable set by the host when a SET ADDRESS command is issued.
- */
-void ISPTarget_LoadExtendedAddress(void)
-{
-	ISPTarget_SendByte(LOAD_EXTENDED_ADDRESS_CMD);
-	ISPTarget_SendByte(0x00);
-	ISPTarget_SendByte(CurrentAddress >> 16);
-	ISPTarget_SendByte(0x00);
-}
-
-/** Waits until the last issued target memory programming command has completed, via the check mode given and using
- *  the given parameters.
- *
- *  \param[in] ProgrammingMode  Programming mode used and completion check to use, a mask of \c PROG_MODE_* constants
- *  \param[in] PollAddress      Memory address to poll for completion if polling check mode used
- *  \param[in] PollValue        Poll value to check against if polling check mode used
- *  \param[in] DelayMS          Milliseconds to delay before returning if delay check mode used
- *  \param[in] ReadMemCommand   Device low-level READ MEMORY command to send if value check mode used
- *
- *  \return V2 Protocol status \ref STATUS_CMD_OK if the no timeout occurred, \ref STATUS_RDY_BSY_TOUT or
- *          \ref STATUS_CMD_TOUT otherwise
- */
-uint8_t ISPTarget_WaitForProgComplete(const uint8_t ProgrammingMode,
-                                      const uint16_t PollAddress,
-                                      const uint8_t PollValue,
-                                      const uint8_t DelayMS,
-                                      const uint8_t ReadMemCommand)
-{
-	uint8_t ProgrammingStatus = STATUS_CMD_OK;
-
-	/* Determine method of Programming Complete check */
-	switch (ProgrammingMode & ~(PROG_MODE_PAGED_WRITES_MASK | PROG_MODE_COMMIT_PAGE_MASK))
-	{
-		case PROG_MODE_WORD_TIMEDELAY_MASK:
-		case PROG_MODE_PAGED_TIMEDELAY_MASK:
-			ISPProtocol_DelayMS(DelayMS);
-			break;
-		case PROG_MODE_WORD_VALUE_MASK:
-		case PROG_MODE_PAGED_VALUE_MASK:
-			do
-			{
-				ISPTarget_SendByte(ReadMemCommand);
-				ISPTarget_SendByte(PollAddress >> 8);
-				ISPTarget_SendByte(PollAddress & 0xFF);
-			}
-			while ((ISPTarget_TransferByte(0x00) == PollValue) && TimeoutTicksRemaining);
-
-			if (!(TimeoutTicksRemaining))
-			  ProgrammingStatus = STATUS_CMD_TOUT;
-
-			break;
-		case PROG_MODE_WORD_READYBUSY_MASK:
-		case PROG_MODE_PAGED_READYBUSY_MASK:
-			ProgrammingStatus = ISPTarget_WaitWhileTargetBusy();
-			break;
-	}
-
-	/* Program complete - reset timeout */
-	TimeoutTicksRemaining = COMMAND_TIMEOUT_TICKS;
-
-	return ProgrammingStatus;
-}
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
deleted file mode 100644
index 1687abac18..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ISPTarget.c.
- */
-
-#ifndef _ISP_TARGET_
-#define _ISP_TARGET_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/pgmspace.h>
-		#include <util/delay.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Peripheral/SPI.h>
-
-		#include "../V2Protocol.h"
-		#include "ISPProtocol.h"
-		#include "Config/AppConfig.h"
-
-	/* Preprocessor Checks: */
-		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
-			#undef ENABLE_ISP_PROTOCOL
-
-			#if !defined(ENABLE_XPROG_PROTOCOL)
-				#define ENABLE_XPROG_PROTOCOL
-			#endif
-		#endif
-
-	/* Macros: */
-		/** Low level device command to issue an extended FLASH address, for devices with over 128KB of FLASH. */
-		#define LOAD_EXTENDED_ADDRESS_CMD     0x4D
-
-		/** Macro to convert an ISP frequency to a number of timer clock cycles for the software SPI driver. */
-		#define TIMER_COMP(freq)              (((F_CPU / 8) / 2 / freq) - 1)
-
-		/** ISP rescue clock speed in Hz, for clocking targets with incorrectly set fuses. */
-		#define ISP_RESCUE_CLOCK_SPEED        4000000
-
-	/* External Variables: */
-		extern bool HardwareSPIMode;
-
-	/* Function Prototypes: */
-		void    ISPTarget_EnableTargetISP(void);
-		void    ISPTarget_DisableTargetISP(void);
-		void    ISPTarget_ConfigureRescueClock(void);
-		void    ISPTarget_ConfigureSoftwareSPI(const uint8_t SCKDuration);
-		uint8_t ISPTarget_TransferSoftSPIByte(const uint8_t Byte);
-		void    ISPTarget_ChangeTargetResetLine(const bool ResetTarget);
-		uint8_t ISPTarget_WaitWhileTargetBusy(void);
-		void    ISPTarget_LoadExtendedAddress(void);
-		uint8_t ISPTarget_WaitForProgComplete(const uint8_t ProgrammingMode,
-		                                      const uint16_t PollAddress,
-		                                      const uint8_t PollValue,
-		                                      const uint8_t DelayMS,
-		                                      const uint8_t ReadMemCommand);
-
-	/* Inline Functions: */
-		/** Sends a byte of ISP data to the attached target, using the appropriate SPI hardware or
-		 *  software routines depending on the selected ISP speed.
-		 *
-		 *  \param[in] Byte  Byte of data to send to the attached target
-		 */
-		static inline void ISPTarget_SendByte(const uint8_t Byte)
-		{
-			if (HardwareSPIMode)
-			  SPI_SendByte(Byte);
-			else
-			  ISPTarget_TransferSoftSPIByte(Byte);
-		}
-
-		/** Receives a byte of ISP data from the attached target, using the appropriate
-		 *  SPI hardware or software routines depending on the selected ISP speed.
-		 *
-		 *  \return Received byte of data from the attached target
-		 */
-		static inline uint8_t ISPTarget_ReceiveByte(void)
-		{
-			uint8_t ReceivedByte;
-
-			if (HardwareSPIMode)
-			  ReceivedByte = SPI_ReceiveByte();
-			else
-			  ReceivedByte = ISPTarget_TransferSoftSPIByte(0x00);
-
-			#if defined(INVERTED_ISP_MISO)
-			return ~ReceivedByte;
-			#else
-			return  ReceivedByte;
-			#endif
-		}
-
-		/** Sends and receives a byte of ISP data to and from the attached target, using the
-		 *  appropriate SPI hardware or software routines depending on the selected ISP speed.
-		 *
-		 *  \param[in] Byte  Byte of data to send to the attached target
-		 *
-		 *  \return Received byte of data from the attached target
-		 */
-		static inline uint8_t ISPTarget_TransferByte(const uint8_t Byte)
-		{
-			uint8_t ReceivedByte;
-
-			if (HardwareSPIMode)
-			  ReceivedByte = SPI_TransferByte(Byte);
-			else
-			  ReceivedByte = ISPTarget_TransferSoftSPIByte(Byte);
-
-			#if defined(INVERTED_ISP_MISO)
-			return ~ReceivedByte;
-			#else
-			return  ReceivedByte;
-			#endif
-		}
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2Protocol.c b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2Protocol.c
deleted file mode 100644
index a4fada724b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2Protocol.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  V2Protocol handler, to process V2 Protocol commands used in Atmel programmer devices.
- */
-
-#define  INCLUDE_FROM_V2PROTOCOL_C
-#include "V2Protocol.h"
-
-/** Current memory address for FLASH/EEPROM memory read/write commands */
-uint32_t CurrentAddress;
-
-/** Flag to indicate that the next read/write operation must update the device's current extended FLASH address */
-bool MustLoadExtendedAddress;
-
-
-/** ISR to manage timeouts whilst processing a V2Protocol command */
-ISR(TIMER0_COMPA_vect, ISR_NOBLOCK)
-{
-	if (TimeoutTicksRemaining)
-	  TimeoutTicksRemaining--;
-	else
-	  TCCR0B = 0;
-}
-
-/** Initializes the hardware and software associated with the V2 protocol command handling. */
-void V2Protocol_Init(void)
-{
-	#if defined(ADC) && !defined(NO_VTARGET_DETECT)
-	/* Initialize the ADC converter for VTARGET level detection on supported AVR models */
-	ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128);
-	ADC_SetupChannel(VTARGET_ADC_CHANNEL);
-	ADC_StartReading(VTARGET_REF_MASK | ADC_RIGHT_ADJUSTED | VTARGET_ADC_CHANNEL_MASK);
-	#endif
-
-	/* Timeout timer initialization (~10ms period) */
-	OCR0A  = (((F_CPU / 1024) / 100) - 1);
-	TCCR0A = (1 << WGM01);
-	TIMSK0 = (1 << OCIE0A);
-
-	V2Params_LoadNonVolatileParamValues();
-
-	#if defined(ENABLE_ISP_PROTOCOL)
-	ISPTarget_ConfigureRescueClock();
-	#endif
-}
-
-/** Master V2 Protocol packet handler, for received V2 Protocol packets from a connected host.
- *  This routine decodes the issued command and passes off the handling of the command to the
- *  appropriate function.
- */
-void V2Protocol_ProcessCommand(void)
-{
-	uint8_t V2Command = Endpoint_Read_8();
-
-	/* Reset timeout counter duration and start the timer */
-	TimeoutTicksRemaining = COMMAND_TIMEOUT_TICKS;
-	TCCR0B = ((1 << CS02) | (1 << CS00));
-
-	switch (V2Command)
-	{
-		case CMD_SIGN_ON:
-			V2Protocol_SignOn();
-			break;
-		case CMD_SET_PARAMETER:
-		case CMD_GET_PARAMETER:
-			V2Protocol_GetSetParam(V2Command);
-			break;
-		case CMD_LOAD_ADDRESS:
-			V2Protocol_LoadAddress();
-			break;
-		case CMD_RESET_PROTECTION:
-			V2Protocol_ResetProtection();
-			break;
-#if defined(ENABLE_ISP_PROTOCOL)
-		case CMD_ENTER_PROGMODE_ISP:
-			ISPProtocol_EnterISPMode();
-			break;
-		case CMD_LEAVE_PROGMODE_ISP:
-			ISPProtocol_LeaveISPMode();
-			break;
-		case CMD_PROGRAM_FLASH_ISP:
-		case CMD_PROGRAM_EEPROM_ISP:
-			ISPProtocol_ProgramMemory(V2Command);
-			break;
-		case CMD_READ_FLASH_ISP:
-		case CMD_READ_EEPROM_ISP:
-			ISPProtocol_ReadMemory(V2Command);
-			break;
-		case CMD_CHIP_ERASE_ISP:
-			ISPProtocol_ChipErase();
-			break;
-		case CMD_READ_FUSE_ISP:
-		case CMD_READ_LOCK_ISP:
-		case CMD_READ_SIGNATURE_ISP:
-		case CMD_READ_OSCCAL_ISP:
-			ISPProtocol_ReadFuseLockSigOSCCAL(V2Command);
-			break;
-		case CMD_PROGRAM_FUSE_ISP:
-		case CMD_PROGRAM_LOCK_ISP:
-			ISPProtocol_WriteFuseLock(V2Command);
-			break;
-		case CMD_SPI_MULTI:
-			ISPProtocol_SPIMulti();
-			break;
-#endif
-#if defined(ENABLE_XPROG_PROTOCOL)
-		case CMD_XPROG_SETMODE:
-			XPROGProtocol_SetMode();
-			break;
-		case CMD_XPROG:
-			XPROGProtocol_Command();
-			break;
-#endif
-		default:
-			V2Protocol_UnknownCommand(V2Command);
-			break;
-	}
-
-	/* Disable the timeout management timer */
-	TCCR0B = 0;
-
-	Endpoint_WaitUntilReady();
-	Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT);
-}
-
-/** Handler for unknown V2 protocol commands. This discards all sent data and returns a
- *  STATUS_CMD_UNKNOWN status back to the host.
- *
- *  \param[in] V2Command  Issued V2 Protocol command byte from the host
- */
-static void V2Protocol_UnknownCommand(const uint8_t V2Command)
-{
-	/* Discard all incoming data */
-	while (Endpoint_BytesInEndpoint() == AVRISP_DATA_EPSIZE)
-	{
-		Endpoint_ClearOUT();
-		Endpoint_WaitUntilReady();
-	}
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	Endpoint_Write_8(V2Command);
-	Endpoint_Write_8(STATUS_CMD_UNKNOWN);
-	Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_SIGN_ON command, returning the programmer ID string to the host. */
-static void V2Protocol_SignOn(void)
-{
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	Endpoint_Write_8(CMD_SIGN_ON);
-	Endpoint_Write_8(STATUS_CMD_OK);
-	Endpoint_Write_8(sizeof(PROGRAMMER_ID) - 1);
-	Endpoint_Write_Stream_LE(PROGRAMMER_ID, (sizeof(PROGRAMMER_ID) - 1), NULL);
-	Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_RESET_PROTECTION command, implemented as a dummy ACK function as
- *  no target short-circuit protection is currently implemented.
- */
-static void V2Protocol_ResetProtection(void)
-{
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	Endpoint_Write_8(CMD_RESET_PROTECTION);
-	Endpoint_Write_8(STATUS_CMD_OK);
-	Endpoint_ClearIN();
-}
-
-
-/** Handler for the CMD_SET_PARAMETER and CMD_GET_PARAMETER commands from the host, setting or
- *  getting a device parameter's value from the parameter table.
- *
- *  \param[in] V2Command  Issued V2 Protocol command byte from the host
- */
-static void V2Protocol_GetSetParam(const uint8_t V2Command)
-{
-	uint8_t ParamID = Endpoint_Read_8();
-	uint8_t ParamValue;
-
-	if (V2Command == CMD_SET_PARAMETER)
-	  ParamValue = Endpoint_Read_8();
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	Endpoint_Write_8(V2Command);
-
-	uint8_t ParamPrivs = V2Params_GetParameterPrivileges(ParamID);
-
-	if ((V2Command == CMD_SET_PARAMETER) && (ParamPrivs & PARAM_PRIV_WRITE))
-	{
-		Endpoint_Write_8(STATUS_CMD_OK);
-		V2Params_SetParameterValue(ParamID, ParamValue);
-	}
-	else if ((V2Command == CMD_GET_PARAMETER) && (ParamPrivs & PARAM_PRIV_READ))
-	{
-		Endpoint_Write_8(STATUS_CMD_OK);
-		Endpoint_Write_8(V2Params_GetParameterValue(ParamID));
-	}
-	else
-	{
-		Endpoint_Write_8(STATUS_CMD_FAILED);
-	}
-
-	Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_LOAD_ADDRESS command, loading the given device address into a
- *  global storage variable for later use, and issuing LOAD EXTENDED ADDRESS commands
- *  to the attached device as required.
- */
-static void V2Protocol_LoadAddress(void)
-{
-	Endpoint_Read_Stream_BE(&CurrentAddress, sizeof(CurrentAddress), NULL);
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	if (CurrentAddress & (1UL << 31))
-	  MustLoadExtendedAddress = true;
-
-	Endpoint_Write_8(CMD_LOAD_ADDRESS);
-	Endpoint_Write_8(STATUS_CMD_OK);
-	Endpoint_ClearIN();
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2Protocol.h b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2Protocol.h
deleted file mode 100644
index 143e6965d4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2Protocol.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for V2Protocol.c.
- */
-
-#ifndef _V2_PROTOCOL_
-#define _V2_PROTOCOL_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/interrupt.h>
-		#include <avr/wdt.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "../AVRISPDescriptors.h"
-		#include "V2ProtocolConstants.h"
-		#include "V2ProtocolParams.h"
-		#include "ISP/ISPProtocol.h"
-		#include "XPROG/XPROGProtocol.h"
-		#include "Config/AppConfig.h"
-
-	/* Preprocessor Checks: */
-		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
-			#undef ENABLE_ISP_PROTOCOL
-
-			#if !defined(ENABLE_XPROG_PROTOCOL)
-				#define ENABLE_XPROG_PROTOCOL
-			#endif
-		#endif
-
-		#if defined(USB_SERIES_4_AVR) && ((VTARGET_ADC_CHANNEL == 2) || (VTARGET_ADC_CHANNEL == 3)) && !defined(NO_VTARGET_DETECT)
-			#error The U4 AVR chips do not contain ADC channels 2 or 3. Please change VTARGET_ADC_CHANNEL or define NO_VTARGET_DETECT in the makefile.
-		#endif
-
-		#if defined(VTARGET_USE_INTERNAL_REF)
-			#undef  VTARGET_REF_VOLTS
-			#define VTARGET_REF_VOLTS 2.56
-
-			#define VTARGET_REF_MASK ADC_REFERENCE_INT2560MV
-		#else
-			#define VTARGET_REF_MASK ADC_REFERENCE_AVCC
-		#endif
-
-	/* Macros: */
-		/** Programmer ID string, returned to the host during the CMD_SIGN_ON command processing. */
-		#define PROGRAMMER_ID              "AVRISP_MK2"
-
-		/** Timeout period for each issued command from the host before it is aborted (in 10ms ticks). */
-		#define COMMAND_TIMEOUT_TICKS      100
-
-		/** Command timeout ticks remaining counter, GPIOR for speed. */
-		#define TimeoutTicksRemaining      GPIOR1
-
-		/** MUX mask for the VTARGET ADC channel number. */
-		#define VTARGET_ADC_CHANNEL_MASK   ADC_GET_CHANNEL_MASK(VTARGET_ADC_CHANNEL)
-
-	/* External Variables: */
-		extern uint32_t CurrentAddress;
-		extern bool     MustLoadExtendedAddress;
-
-	/* Function Prototypes: */
-		void V2Protocol_Init(void);
-		void V2Protocol_ProcessCommand(void);
-
-		#if defined(INCLUDE_FROM_V2PROTOCOL_C)
-			static void V2Protocol_UnknownCommand(const uint8_t V2Command);
-			static void V2Protocol_SignOn(void);
-			static void V2Protocol_GetSetParam(const uint8_t V2Command);
-			static void V2Protocol_ResetProtection(void);
-			static void V2Protocol_LoadAddress(void);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2ProtocolConstants.h b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2ProtocolConstants.h
deleted file mode 100644
index efa8ee6749..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2ProtocolConstants.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Macros for the V2 Protocol Packet Commands and Responses.
- */
-
-#ifndef _V2_PROTOCOL_CONSTANTS_
-#define _V2_PROTOCOL_CONSTANTS_
-
-	/* Macros: */
-		#define CMD_SIGN_ON                 0x01
-		#define CMD_SET_PARAMETER           0x02
-		#define CMD_GET_PARAMETER           0x03
-		#define CMD_OSCCAL                  0x05
-		#define CMD_LOAD_ADDRESS            0x06
-		#define CMD_FIRMWARE_UPGRADE        0x07
-		#define CMD_RESET_PROTECTION        0x0A
-		#define CMD_ENTER_PROGMODE_ISP      0x10
-		#define CMD_LEAVE_PROGMODE_ISP      0x11
-		#define CMD_CHIP_ERASE_ISP          0x12
-		#define CMD_PROGRAM_FLASH_ISP       0x13
-		#define CMD_READ_FLASH_ISP          0x14
-		#define CMD_PROGRAM_EEPROM_ISP      0x15
-		#define CMD_READ_EEPROM_ISP         0x16
-		#define CMD_PROGRAM_FUSE_ISP        0x17
-		#define CMD_READ_FUSE_ISP           0x18
-		#define CMD_PROGRAM_LOCK_ISP        0x19
-		#define CMD_READ_LOCK_ISP           0x1A
-		#define CMD_READ_SIGNATURE_ISP      0x1B
-		#define CMD_READ_OSCCAL_ISP         0x1C
-		#define CMD_SPI_MULTI               0x1D
-		#define CMD_XPROG                   0x50
-		#define CMD_XPROG_SETMODE           0x51
-
-		#define STATUS_CMD_OK               0x00
-		#define STATUS_CMD_TOUT             0x80
-		#define STATUS_RDY_BSY_TOUT         0x81
-		#define STATUS_SET_PARAM_MISSING    0x82
-		#define STATUS_CMD_FAILED           0xC0
-		#define STATUS_CMD_UNKNOWN          0xC9
-		#define STATUS_CMD_ILLEGAL_PARAM    0xCA
-		#define STATUS_ISP_READY            0x00
-		#define STATUS_CONN_FAIL_MOSI       0x01
-		#define STATUS_CONN_FAIL_RST        0x02
-		#define STATUS_CONN_FAIL_SCK        0x04
-		#define STATUS_TGT_NOT_DETECTED     0x10
-		#define STATUS_TGT_REVERSE_INSERTED 0x20
-
-		#define PARAM_BUILD_NUMBER_LOW      0x80
-		#define PARAM_BUILD_NUMBER_HIGH     0x81
-		#define PARAM_HW_VER                0x90
-		#define PARAM_SW_MAJOR              0x91
-		#define PARAM_SW_MINOR              0x92
-		#define PARAM_VTARGET               0x94
-		#define PARAM_SCK_DURATION          0x98
-		#define PARAM_RESET_POLARITY        0x9E
-		#define PARAM_STATUS_TGT_CONN       0xA1
-		#define PARAM_DISCHARGEDELAY        0xA4
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c
deleted file mode 100644
index 2f287060c9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  V2Protocol parameter handler, to process V2 Protocol device parameters.
- */
-
-#define  INCLUDE_FROM_V2PROTOCOL_PARAMS_C
-#include "V2ProtocolParams.h"
-
-/* Non-Volatile Parameter Values for EEPROM storage */
-static uint8_t EEMEM EEPROM_Reset_Polarity = 0x01;
-
-/* Non-Volatile Parameter Values for EEPROM storage */
-static uint8_t EEMEM EEPROM_SCK_Duration   = 0x06;
-
-/* Volatile Parameter Values for RAM storage */
-static ParameterItem_t ParameterTable[] =
-	{
-		{ .ParamID          = PARAM_BUILD_NUMBER_LOW,
-		  .ParamPrivileges  = PARAM_PRIV_READ,
-		  .ParamValue       = 0                                  },
-
-		{ .ParamID          = PARAM_BUILD_NUMBER_HIGH,
-		  .ParamPrivileges  = PARAM_PRIV_READ,
-		  .ParamValue       = 0                                  },
-
-		{ .ParamID          = PARAM_HW_VER,
-		  .ParamPrivileges  = PARAM_PRIV_READ,
-		  .ParamValue       = 0x00                               },
-
-		{ .ParamID          = PARAM_SW_MAJOR,
-		  .ParamPrivileges  = PARAM_PRIV_READ,
-		  .ParamValue       = 0x01                               },
-
-		{ .ParamID          = PARAM_SW_MINOR,
-		  .ParamPrivileges  = PARAM_PRIV_READ,
-		  .ParamValue       = FIRMWARE_VERSION_MINOR             },
-
-		{ .ParamID          = PARAM_VTARGET,
-		  .ParamPrivileges  = PARAM_PRIV_READ,
-		  .ParamValue       = (uint8_t)(3.3 * 10)                },
-
-		{ .ParamID          = PARAM_SCK_DURATION,
-		  .ParamPrivileges  = PARAM_PRIV_READ | PARAM_PRIV_WRITE,
-		  .ParamValue       = 6                                  },
-
-		{ .ParamID          = PARAM_RESET_POLARITY,
-		  .ParamPrivileges  = PARAM_PRIV_READ | PARAM_PRIV_WRITE,
-		  .ParamValue       = 0x01                               },
-
-		{ .ParamID          = PARAM_STATUS_TGT_CONN,
-		  .ParamPrivileges  = PARAM_PRIV_READ,
-		  .ParamValue       = STATUS_ISP_READY                   },
-
-		{ .ParamID          = PARAM_DISCHARGEDELAY,
-		  .ParamPrivileges  = PARAM_PRIV_READ | PARAM_PRIV_WRITE,
-		  .ParamValue       = 0x00                               },
-	};
-
-
-/** Loads saved non-volatile parameter values from the EEPROM into the parameter table, as needed. */
-void V2Params_LoadNonVolatileParamValues(void)
-{
-	/* Read parameter values that are stored in non-volatile EEPROM */
-	uint8_t ResetPolarity = eeprom_read_byte(&EEPROM_Reset_Polarity);
-	uint8_t SCKDuration   = eeprom_read_byte(&EEPROM_SCK_Duration);
-
-	/* Update current parameter table if the EEPROM contents was not blank */
-	if (ResetPolarity != 0xFF)
-	  V2Params_GetParamFromTable(PARAM_RESET_POLARITY)->ParamValue = ResetPolarity;
-
-	/* Update current parameter table if the EEPROM contents was not blank */
-	if (SCKDuration != 0xFF)
-	  V2Params_GetParamFromTable(PARAM_SCK_DURATION)->ParamValue   = SCKDuration;
-}
-
-/** Updates any parameter values that are sourced from hardware rather than explicitly set by the host, such as
- *  VTARGET levels from the ADC on supported AVR models.
- */
-void V2Params_UpdateParamValues(void)
-{
-	#if (defined(ADC) && !defined(NO_VTARGET_DETECT))
-	/* Update VTARGET parameter with the latest ADC conversion of VTARGET on supported AVR models */
-	V2Params_GetParamFromTable(PARAM_VTARGET)->ParamValue = (((uint16_t)(VTARGET_REF_VOLTS * 10 * VTARGET_SCALE_FACTOR) * ADC_GetResult()) / 1024);
-	#endif
-}
-
-/** Retrieves the host PC read/write privileges for a given parameter in the parameter table. This should
- *  be called before calls to \ref V2Params_GetParameterValue() or \ref V2Params_SetParameterValue() when
- *  getting or setting parameter values in response to requests from the host.
- *
- *  \param[in] ParamID  Parameter ID whose privileges are to be retrieved from the table
- *
- *  \return Privileges for the requested parameter, as a mask of \c PARAM_PRIV_* masks
- */
-uint8_t V2Params_GetParameterPrivileges(const uint8_t ParamID)
-{
-	ParameterItem_t* const ParamInfo = V2Params_GetParamFromTable(ParamID);
-
-	if (ParamInfo == NULL)
-	  return 0;
-
-	return ParamInfo->ParamPrivileges;
-}
-
-/** Retrieves the current value for a given parameter in the parameter table.
- *
- *  \note This function does not first check for read privileges - if the value is being sent to the host via a
- *        GET PARAM command, \ref V2Params_GetParameterPrivileges() should be called first to ensure that the
- *        parameter is host-readable.
- *
- *  \param[in] ParamID  Parameter ID whose value is to be retrieved from the table
- *
- *  \return Current value of the parameter in the table, or 0 if not found
- */
-uint8_t V2Params_GetParameterValue(const uint8_t ParamID)
-{
-	ParameterItem_t* const ParamInfo = V2Params_GetParamFromTable(ParamID);
-
-	if (ParamInfo == NULL)
-	  return 0;
-
-	return ParamInfo->ParamValue;
-}
-
-/** Sets the value for a given parameter in the parameter table.
- *
- *  \note This function does not first check for write privileges - if the value is being sourced from the host
- *        via a SET PARAM command, \ref V2Params_GetParameterPrivileges() should be called first to ensure that the
- *        parameter is host-writable.
- *
- *  \param[in] ParamID  Parameter ID whose value is to be set in the table
- *  \param[in] Value    New value to set the parameter to
- *
- *  \return Pointer to the associated parameter information from the parameter table if found, NULL otherwise
- */
-void V2Params_SetParameterValue(const uint8_t ParamID,
-                                const uint8_t Value)
-{
-	ParameterItem_t* const ParamInfo = V2Params_GetParamFromTable(ParamID);
-
-	if (ParamInfo == NULL)
-	  return;
-
-	ParamInfo->ParamValue = Value;
-
-	/* The target RESET line polarity is a non-volatile parameter, save to EEPROM when changed */
-	if (ParamID == PARAM_RESET_POLARITY)
-	  eeprom_update_byte(&EEPROM_Reset_Polarity, Value);
-
-	/* The target SCK line period is a non-volatile parameter, save to EEPROM when changed */
-	if (ParamID == PARAM_SCK_DURATION)
-	  eeprom_update_byte(&EEPROM_SCK_Duration, Value);
-}
-
-/** Retrieves a parameter entry (including ID, value and privileges) from the parameter table that matches the given
- *  parameter ID.
- *
- *  \param[in] ParamID  Parameter ID to find in the table
- *
- *  \return Pointer to the associated parameter information from the parameter table if found, NULL otherwise
- */
-static ParameterItem_t* const V2Params_GetParamFromTable(const uint8_t ParamID)
-{
-	ParameterItem_t* CurrTableItem = ParameterTable;
-
-	/* Find the parameter in the parameter table if present */
-	for (uint8_t TableIndex = 0; TableIndex < TABLE_PARAM_COUNT; TableIndex++)
-	{
-		if (ParamID == CurrTableItem->ParamID)
-		  return CurrTableItem;
-
-		CurrTableItem++;
-	}
-
-	return NULL;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h
deleted file mode 100644
index 1155dbe4da..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for V2ProtocolParams.c.
- */
-
-#ifndef _V2_PROTOCOL_PARAMS_
-#define _V2_PROTOCOL_PARAMS_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/eeprom.h>
-
-		#if defined(ADC)
-			#include <LUFA/Drivers/Peripheral/ADC.h>
-		#endif
-
-		#include "V2Protocol.h"
-		#include "V2ProtocolConstants.h"
-		#include "ISP/ISPTarget.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Parameter privilege mask to allow the host PC to read the parameter's value. */
-		#define PARAM_PRIV_READ     (1 << 0)
-
-		/** Parameter privilege mask to allow the host PC to change the parameter's value. */
-		#define PARAM_PRIV_WRITE    (1 << 1)
-
-		/** Total number of parameters in the parameter table */
-		#define TABLE_PARAM_COUNT   (sizeof(ParameterTable) / sizeof(ParameterTable[0]))
-
-		#if (!defined(FIRMWARE_VERSION_MINOR) || defined(__DOXYGEN__))
-			/** Minor firmware version, reported to the host on request; must match the version
-			 *  the host is expecting, or it (may) reject further communications with the programmer. */
-			#define FIRMWARE_VERSION_MINOR   0x17
-		#endif
-
-	/* Type Defines: */
-		/** Type define for a parameter table entry indicating a PC readable or writable device parameter. */
-		typedef struct
-		{
-			const uint8_t ParamID; /**< Parameter ID number to uniquely identify the parameter within the device */
-			const uint8_t ParamPrivileges;  /**< Parameter privileges to allow the host to read or write the parameter's value */
-			uint8_t ParamValue; /**< Current parameter's value within the device */
-		} ParameterItem_t;
-
-	/* Function Prototypes: */
-		void    V2Params_LoadNonVolatileParamValues(void);
-		void    V2Params_UpdateParamValues(void);
-
-		uint8_t V2Params_GetParameterPrivileges(const uint8_t ParamID);
-		uint8_t V2Params_GetParameterValue(const uint8_t ParamID);
-		void    V2Params_SetParameterValue(const uint8_t ParamID,
-		                                   const uint8_t Value);
-
-		#if defined(INCLUDE_FROM_V2PROTOCOL_PARAMS_C)
-			static ParameterItem_t* const V2Params_GetParamFromTable(const uint8_t ParamID);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
deleted file mode 100644
index 277e58f2f4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Target-related functions for the TINY target's NVM module.
- */
-
-#define  INCLUDE_FROM_TINYNVM_C
-#include "TINYNVM.h"
-
-#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
-
-/** Sends the given pointer address to the target's TPI pointer register */
-static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress)
-{
-	/* Send the given 16-bit address to the target, LSB first */
-	XPROGTarget_SendByte(TPI_CMD_SSTPR | 0);
-	XPROGTarget_SendByte(AbsoluteAddress & 0xFF);
-	XPROGTarget_SendByte(TPI_CMD_SSTPR | 1);
-	XPROGTarget_SendByte(AbsoluteAddress >> 8);
-}
-
-/** Sends a SIN command to the target with the specified I/O address, ready for the data byte to be written.
- *
- *  \param[in] Address  6-bit I/O address to write to in the target's I/O memory space
- */
-static void TINYNVM_SendReadNVMRegister(const uint8_t Address)
-{
-	/* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper
-	 * two bits of the 6-bit address are shifted left once - use function to reduce code size */
-	XPROGTarget_SendByte(TPI_CMD_SIN(Address));
-}
-
-/** Sends a SOUT command to the target with the specified I/O address, ready for the data byte to be read.
- *
- *  \param[in] Address  6-bit I/O address to read from in the target's I/O memory space
- */
-static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)
-{
-	/* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper
-	 * two bits of the 6-bit address are shifted left once - use function to reduce code size */
-	XPROGTarget_SendByte(TPI_CMD_SOUT(Address));
-}
-
-/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read.
- *
- *  \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise
- */
-bool TINYNVM_WaitWhileNVMBusBusy(void)
-{
-	/* Poll the STATUS register to check to see if NVM access has been enabled */
-	for (;;)
-	{
-		/* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
-		XPROGTarget_SendByte(TPI_CMD_SLDCS(TPI_REG_STATUS));
-
-		uint8_t StatusRegister = XPROGTarget_ReceiveByte();
-
-		/* We might have timed out waiting for the status register read response, check here */
-		if (!(TimeoutTicksRemaining))
-		  return false;
-
-		/* Check the status register read response to see if the NVM bus is enabled */
-		if (StatusRegister & TPI_STATUS_NVM)
-		  return true;
-	}
-}
-
-/** Waits while the target's NVM controller is busy performing an operation, exiting if the
- *  timeout period expires.
- *
- *  \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise
- */
-bool TINYNVM_WaitWhileNVMControllerBusy(void)
-{
-	/* Poll the STATUS register to check to see if NVM access has been enabled */
-	for (;;)
-	{
-		/* Send the SIN command to read the TPI STATUS register to see the NVM bus is busy */
-		TINYNVM_SendReadNVMRegister(XPROG_Param_NVMCSRRegAddr);
-
-		uint8_t StatusRegister = XPROGTarget_ReceiveByte();
-
-		/* We might have timed out waiting for the status register read response, check here */
-		if (!(TimeoutTicksRemaining))
-		  return false;
-
-		/* Check to see if the BUSY flag is still set */
-		if (!(StatusRegister & (1 << 7)))
-		  return true;
-	}
-}
-
-/** Enables the physical TPI interface on the target and enables access to the internal NVM controller.
- *
- *  \return Boolean \c true if the TPI interface was enabled successfully, \c false otherwise
- */
-bool TINYNVM_EnableTPI(void)
-{
-	/* Enable TPI programming mode with the attached target */
-	XPROGTarget_EnableTargetTPI();
-
-	/* Lower direction change guard time to 32 USART bits */
-	XPROGTarget_SendByte(TPI_CMD_SSTCS(TPI_REG_CTRL));
-	XPROGTarget_SendByte(0x02);
-
-	/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
-	XPROGTarget_SendByte(TPI_CMD_SKEY);
-	for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--)
-	  XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]);
-
-	/* Wait until the NVM bus becomes active */
-	return TINYNVM_WaitWhileNVMBusBusy();
-}
-
-/** Removes access to the target's NVM controller and physically disables the target's physical TPI interface. */
-void TINYNVM_DisableTPI(void)
-{
-	TINYNVM_WaitWhileNVMBusBusy();
-
-	do
-	{
-		/* Clear the NVMEN bit in the TPI STATUS register to disable TPI mode */
-		XPROGTarget_SendByte(TPI_CMD_SSTCS(TPI_REG_STATUS));
-		XPROGTarget_SendByte(0x00);
-
-		/* Read back the STATUS register, check to see if it took effect */
-		XPROGTarget_SendByte(TPI_CMD_SLDCS(TPI_REG_STATUS));
-	} while (XPROGTarget_ReceiveByte() != 0x00);
-
-	XPROGTarget_DisableTargetTPI();
-}
-
-/** Reads memory from the target's memory spaces.
- *
- *  \param[in]  ReadAddress  Start address to read from within the target's address space
- *  \param[out] ReadBuffer   Buffer to store read data into
- *  \param[in]  ReadSize     Length of the data to read from the device
- *
- *  \return Boolean \c true if the command sequence complete successfully
- */
-bool TINYNVM_ReadMemory(const uint16_t ReadAddress,
-                        uint8_t* ReadBuffer,
-                        uint16_t ReadSize)
-{
-	/* Wait until the NVM controller is no longer busy */
-	if (!(TINYNVM_WaitWhileNVMControllerBusy()))
-	  return false;
-
-	/* Set the NVM control register to the NO OP command for memory reading */
-	TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
-	XPROGTarget_SendByte(TINY_NVM_CMD_NOOP);
-
-	/* Send the address of the location to read from */
-	TINYNVM_SendPointerAddress(ReadAddress);
-
-	while (ReadSize-- && TimeoutTicksRemaining)
-	{
-		/* Read the byte of data from the target */
-		XPROGTarget_SendByte(TPI_CMD_SLD(TPI_POINTER_INDIRECT_PI));
-		*(ReadBuffer++) = XPROGTarget_ReceiveByte();
-	}
-
-	return (TimeoutTicksRemaining > 0);
-}
-
-/** Writes word addressed memory to the target's memory spaces.
- *
- *  \param[in] WriteAddress  Start address to write to within the target's address space
- *  \param[in] WriteBuffer   Buffer to source data from
- *  \param[in] WriteLength   Total number of bytes to write to the device (must be an integer multiple of 2)
- *
- *  \return Boolean \c true if the command sequence complete successfully
- */
-bool TINYNVM_WriteMemory(const uint16_t WriteAddress,
-                         uint8_t* WriteBuffer,
-                         uint16_t WriteLength)
-{
-	/* Wait until the NVM controller is no longer busy */
-	if (!(TINYNVM_WaitWhileNVMControllerBusy()))
-	  return false;
-
-	/* Must have an integer number of words to write - if extra byte, word-align via a dummy high byte */
-	if (WriteLength & 0x01)
-	  WriteBuffer[WriteLength++] = 0xFF;
-
-	/* Set the NVM control register to the WORD WRITE command for memory writing */
-	TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
-	XPROGTarget_SendByte(TINY_NVM_CMD_WORDWRITE);
-
-	/* Send the address of the location to write to */
-	TINYNVM_SendPointerAddress(WriteAddress);
-
-	while (WriteLength)
-	{
-		/* Wait until the NVM controller is no longer busy */
-		if (!(TINYNVM_WaitWhileNVMControllerBusy()))
-		  return false;
-
-		/* Write the low byte of data to the target */
-		XPROGTarget_SendByte(TPI_CMD_SST(TPI_POINTER_INDIRECT_PI));
-		XPROGTarget_SendByte(*(WriteBuffer++));
-
-		/* Write the high byte of data to the target */
-		XPROGTarget_SendByte(TPI_CMD_SST(TPI_POINTER_INDIRECT_PI));
-		XPROGTarget_SendByte(*(WriteBuffer++));
-
-		/* Need to decrement the write length twice, since we wrote a whole two-byte word */
-		WriteLength -= 2;
-	}
-
-	return true;
-}
-
-/** Erases the target's memory space.
- *
- *  \param[in] EraseCommand  NVM erase command to send to the device
- *  \param[in] Address       Address inside the memory space to erase
- *
- *  \return Boolean \c true if the command sequence complete successfully
- */
-bool TINYNVM_EraseMemory(const uint8_t EraseCommand,
-                         const uint16_t Address)
-{
-	/* Wait until the NVM controller is no longer busy */
-	if (!(TINYNVM_WaitWhileNVMControllerBusy()))
-	  return false;
-
-	/* Set the NVM control register to the target memory erase command */
-	TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);
-	XPROGTarget_SendByte(EraseCommand);
-
-	/* Write to a high byte location within the target address space to start the erase process */
-	TINYNVM_SendPointerAddress(Address | 0x0001);
-	XPROGTarget_SendByte(TPI_CMD_SST(TPI_POINTER_INDIRECT));
-	XPROGTarget_SendByte(0x00);
-
-	/* Wait until the NVM controller is no longer busy */
-	if (!(TINYNVM_WaitWhileNVMControllerBusy()))
-	  return false;
-
-	return true;
-}
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h
deleted file mode 100644
index 915c00cc50..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for TINYNVM.c.
- */
-
-#ifndef _TINY_NVM_
-#define _TINY_NVM_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-
-		#include <LUFA/Common/Common.h>
-
-		#include "XPROGProtocol.h"
-		#include "XPROGTarget.h"
-		#include "Config/AppConfig.h"
-
-	/* Preprocessor Checks: */
-		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
-			#undef ENABLE_ISP_PROTOCOL
-
-			#if !defined(ENABLE_XPROG_PROTOCOL)
-				#define ENABLE_XPROG_PROTOCOL
-			#endif
-		#endif
-
-	/* Defines: */
-		#define TINY_NVM_CMD_NOOP              0x00
-		#define TINY_NVM_CMD_CHIPERASE         0x10
-		#define TINY_NVM_CMD_SECTIONERASE      0x14
-		#define TINY_NVM_CMD_WORDWRITE         0x1D
-
-	/* Function Prototypes: */
-		bool TINYNVM_WaitWhileNVMBusBusy(void);
-		bool TINYNVM_WaitWhileNVMControllerBusy(void);
-		bool TINYNVM_EnableTPI(void);
-		void TINYNVM_DisableTPI(void);
-		bool TINYNVM_ReadMemory(const uint16_t ReadAddress,
-		                        uint8_t* ReadBuffer,
-		                        uint16_t ReadLength);
-		bool TINYNVM_WriteMemory(const uint16_t WriteAddress,
-		                         uint8_t* WriteBuffer,
-		                         uint16_t WriteLength);
-		bool TINYNVM_EraseMemory(const uint8_t EraseCommand,
-		                         const uint16_t Address);
-
-		#if (defined(INCLUDE_FROM_TINYNVM_C) && defined(ENABLE_XPROG_PROTOCOL))
-			static void TINYNVM_SendReadNVMRegister(const uint8_t Address);
-			static void TINYNVM_SendWriteNVMRegister(const uint8_t Address);
-			static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
deleted file mode 100644
index d0b5752fad..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
+++ /dev/null
@@ -1,468 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Target-related functions for the XMEGA target's NVM module.
- */
-
-#define  INCLUDE_FROM_XMEGA_NVM_C
-#include "XMEGANVM.h"
-
-#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
-
-/** Sends the given 32-bit absolute address to the target.
- *
- *  \param[in] AbsoluteAddress  Absolute address to send to the target
- */
-static void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress)
-{
-	/* Send the given 32-bit address to the target, LSB first */
-	XPROGTarget_SendByte(AbsoluteAddress &  0xFF);
-	XPROGTarget_SendByte(AbsoluteAddress >> 8);
-	XPROGTarget_SendByte(AbsoluteAddress >> 16);
-	XPROGTarget_SendByte(AbsoluteAddress >> 24);
-}
-
-/** Sends the given NVM register address to the target.
- *
- *  \param[in] Register  NVM register whose absolute address is to be sent
- */
-static void XMEGANVM_SendNVMRegAddress(const uint8_t Register)
-{
-	/* Determine the absolute register address from the NVM base memory address and the NVM register address */
-	uint32_t Address = XPROG_Param_NVMBase | Register;
-
-	/* Send the calculated 32-bit address to the target, LSB first */
-	XMEGANVM_SendAddress(Address);
-}
-
-/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read or CRC
- *  calculation.
- *
- *  \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise
- */
-bool XMEGANVM_WaitWhileNVMBusBusy(void)
-{
-	/* Poll the STATUS register to check to see if NVM access has been enabled */
-	for (;;)
-	{
-		/* Send the LDCS command to read the PDI STATUS register to see the NVM bus is active */
-		XPROGTarget_SendByte(PDI_CMD_LDCS(PDI_REG_STATUS));
-
-		uint8_t StatusRegister = XPROGTarget_ReceiveByte();
-
-		/* We might have timed out waiting for the status register read response, check here */
-		if (!(TimeoutTicksRemaining))
-		  return false;
-
-		/* Check the status register read response to see if the NVM bus is enabled */
-		if (StatusRegister & PDI_STATUS_NVM)
-		  return true;
-	}
-}
-
-/** Waits while the target's NVM controller is busy performing an operation, exiting if the
- *  timeout period expires.
- *
- *  \return Boolean \c true if the NVM controller became ready within the timeout period, \c false otherwise
- */
-bool XMEGANVM_WaitWhileNVMControllerBusy(void)
-{
-	/* Preload the pointer register with the NVM STATUS register address to check the BUSY flag */
-	XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES));
-	XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_STATUS);
-
-	/* Poll the NVM STATUS register while the NVM controller is busy */
-	for (;;)
-	{
-		/* Fetch the current status value via the pointer register (without auto-increment afterwards) */
-		XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT, PDI_DATASIZE_1BYTE));
-
-		uint8_t StatusRegister = XPROGTarget_ReceiveByte();
-
-		/* We might have timed out waiting for the status register read response, check here */
-		if (!(TimeoutTicksRemaining))
-		  return false;
-
-		/* Check to see if the BUSY flag is still set */
-		if (!(StatusRegister & (1 << 7)))
-		  return true;
-	}
-}
-
-/** Enables the physical PDI interface on the target and enables access to the internal NVM controller.
- *
- *  \return Boolean \c true if the PDI interface was enabled successfully, \c false otherwise
- */
-bool XMEGANVM_EnablePDI(void)
-{
-	/* Enable PDI programming mode with the attached target */
-	XPROGTarget_EnableTargetPDI();
-
-	/* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */
-	XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_RESET));
-	XPROGTarget_SendByte(PDI_RESET_KEY);
-
-	/* Lower direction change guard time to 32 USART bits */
-	XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_CTRL));
-	XPROGTarget_SendByte(0x02);
-
-	/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
-	XPROGTarget_SendByte(PDI_CMD_KEY);
-	for (uint8_t i = sizeof(PDI_NVMENABLE_KEY); i > 0; i--)
-	  XPROGTarget_SendByte(PDI_NVMENABLE_KEY[i - 1]);
-
-	/* Wait until the NVM bus becomes active */
-	return XMEGANVM_WaitWhileNVMBusBusy();
-}
-
-/** Removes access to the target's NVM controller and physically disables the target's physical PDI interface. */
-void XMEGANVM_DisablePDI(void)
-{
-	XMEGANVM_WaitWhileNVMBusBusy();
-
-	/* Clear the RESET key in the RESET PDI register to allow the XMEGA to run - must perform this until the
-	 * change takes effect, as in some cases it takes multiple writes (silicon bug?).
-	 */
-	do
-	{
-		/* Clear reset register */
-		XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_RESET));
-		XPROGTarget_SendByte(0x00);
-
-		/* Read back the reset register, check to see if it took effect */
-		XPROGTarget_SendByte(PDI_CMD_LDCS(PDI_REG_RESET));
-	} while (XPROGTarget_ReceiveByte() != 0x00);
-
-	XPROGTarget_DisableTargetPDI();
-}
-
-/** Retrieves the CRC value of the given memory space.
- *
- *  \param[in]  CRCCommand  NVM CRC command to issue to the target
- *  \param[out] CRCDest     CRC Destination when read from the target
- *
- *  \return Boolean \c true if the command sequence complete successfully
- */
-bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand,
-                           uint32_t* const CRCDest)
-{
-	*CRCDest = 0;
-
-	/* Wait until the NVM controller is no longer busy */
-	if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
-	  return false;
-
-	/* Set the NVM command to the correct CRC read command */
-	XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-	XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
-	XPROGTarget_SendByte(CRCCommand);
-
-	/* Set CMDEX bit in NVM CTRLA register to start the CRC generation */
-	XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-	XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
-	XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
-
-	/* Wait until the NVM bus is ready again */
-	if (!(XMEGANVM_WaitWhileNVMBusBusy()))
-	  return false;
-
-	/* Wait until the NVM controller is no longer busy */
-	if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
-	  return false;
-
-	/* Load the PDI pointer register with the DAT0 register start address */
-	XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES));
-	XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT0);
-
-	/* Send the REPEAT command to grab the CRC bytes */
-	XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE));
-	XPROGTarget_SendByte(XMEGA_CRC_LENGTH_BYTES - 1);
-
-	/* Read in the CRC bytes from the target */
-	XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE));
-	for (uint8_t i = 0; i < XMEGA_CRC_LENGTH_BYTES; i++)
-	  ((uint8_t*)CRCDest)[i] = XPROGTarget_ReceiveByte();
-
-	return (TimeoutTicksRemaining > 0);
-}
-
-/** Reads memory from the target's memory spaces.
- *
- *  \param[in]  ReadAddress  Start address to read from within the target's address space
- *  \param[out] ReadBuffer   Buffer to store read data into
- *  \param[in]  ReadSize     Number of bytes to read
- *
- *  \return Boolean \c true if the command sequence complete successfully
- */
-bool XMEGANVM_ReadMemory(const uint32_t ReadAddress,
-                         uint8_t* ReadBuffer,
-                         uint16_t ReadSize)
-{
-	/* Wait until the NVM controller is no longer busy */
-	if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
-	  return false;
-
-	/* Send the READNVM command to the NVM controller for reading of an arbitrary location */
-	XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-	XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
-	XPROGTarget_SendByte(XMEGA_NVM_CMD_READNVM);
-
-	if (ReadSize > 1)
-	{
-		/* Load the PDI pointer register with the start address we want to read from */
-		XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES));
-		XMEGANVM_SendAddress(ReadAddress);
-
-		/* Send the REPEAT command with the specified number of bytes to read */
-		XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE));
-		XPROGTarget_SendByte(ReadSize - 1);
-
-		/* Send a LD command with indirect access and post-increment to read out the bytes */
-		XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE));
-		while (ReadSize-- && TimeoutTicksRemaining)
-		  *(ReadBuffer++) = XPROGTarget_ReceiveByte();
-	}
-	else
-	{
-		/* Send a LDS command with the read address to read out the requested byte */
-		XPROGTarget_SendByte(PDI_CMD_LDS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendAddress(ReadAddress);
-		*(ReadBuffer++) = XPROGTarget_ReceiveByte();
-	}
-
-	return (TimeoutTicksRemaining > 0);
-}
-
-/** Writes byte addressed memory to the target's memory spaces.
- *
- *  \param[in]  WriteCommand  Command to send to the device to write each memory byte
- *  \param[in]  WriteAddress  Address to write to within the target's address space
- *  \param[in]  Byte          Byte to write to the target
- *
- *  \return Boolean \c true if the command sequence complete successfully
- */
-bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand,
-                              const uint32_t WriteAddress,
-                              const uint8_t Byte)
-{
-	/* Wait until the NVM controller is no longer busy */
-	if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
-	  return false;
-
-	/* Send the memory write command to the target */
-	XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-	XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
-	XPROGTarget_SendByte(WriteCommand);
-
-	/* Send new memory byte to the memory of the target */
-	XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-	XMEGANVM_SendAddress(WriteAddress);
-	XPROGTarget_SendByte(Byte);
-
-	return true;
-}
-
-/** Writes page addressed memory to the target's memory spaces.
- *
- *  \param[in]  WriteBuffCommand  Command to send to the device to write a byte to the memory page buffer
- *  \param[in]  EraseBuffCommand  Command to send to the device to erase the memory page buffer
- *  \param[in]  WritePageCommand  Command to send to the device to write the page buffer to the destination memory
- *  \param[in]  PageMode          Bitfield indicating what operations need to be executed on the specified page
- *  \param[in]  WriteAddress      Start address to write the page data to within the target's address space
- *  \param[in]  WriteBuffer       Buffer to source data from
- *  \param[in]  WriteSize         Number of bytes to write
- *
- *  \return Boolean \c true if the command sequence complete successfully
- */
-bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand,
-                              const uint8_t EraseBuffCommand,
-                              const uint8_t WritePageCommand,
-                              const uint8_t PageMode,
-                              const uint32_t WriteAddress,
-                              const uint8_t* WriteBuffer,
-                              uint16_t WriteSize)
-{
-	if (PageMode & XPROG_PAGEMODE_ERASE)
-	{
-		/* Wait until the NVM controller is no longer busy */
-		if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
-		  return false;
-
-		/* Send the memory buffer erase command to the target */
-		XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
-		XPROGTarget_SendByte(EraseBuffCommand);
-
-		/* Set CMDEX bit in NVM CTRLA register to start the buffer erase */
-		XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
-		XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
-	}
-
-	if (WriteSize)
-	{
-		/* Wait until the NVM controller is no longer busy */
-		if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
-		  return false;
-
-		/* Send the memory buffer write command to the target */
-		XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
-		XPROGTarget_SendByte(WriteBuffCommand);
-
-		/* Load the PDI pointer register with the start address we want to write to */
-		XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES));
-		XMEGANVM_SendAddress(WriteAddress);
-
-		/* Send the REPEAT command with the specified number of bytes to write */
-		XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE));
-		XPROGTarget_SendByte(WriteSize - 1);
-
-		/* Send a ST command with indirect access and post-increment to write the bytes */
-		XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE));
-		while (WriteSize--)
-		  XPROGTarget_SendByte(*(WriteBuffer++));
-	}
-
-	if (PageMode & XPROG_PAGEMODE_WRITE)
-	{
-		/* Wait until the NVM controller is no longer busy */
-		if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
-		  return false;
-
-		/* Send the memory write command to the target */
-		XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
-		XPROGTarget_SendByte(WritePageCommand);
-
-		/* Send the address of the first page location to write the memory page */
-		XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendAddress(WriteAddress);
-		XPROGTarget_SendByte(0x00);
-	}
-
-	return true;
-}
-
-/** Erases a specific memory space of the target.
- *
- *  \param[in] EraseCommand  NVM erase command to send to the device
- *  \param[in] Address       Address inside the memory space to erase
- *
- *  \return Boolean \c true if the command sequence complete successfully
- */
-bool XMEGANVM_EraseMemory(const uint8_t EraseCommand,
-                          const uint32_t Address)
-{
-	/* Wait until the NVM controller is no longer busy */
-	if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
-	  return false;
-
-	/* EEPROM and Chip erasures are triggered differently to FLASH section erasures */
-	if (EraseCommand == XMEGA_NVM_CMD_CHIPERASE)
-	{
-		/* Send the memory erase command to the target */
-		XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
-		XPROGTarget_SendByte(EraseCommand);
-
-		/* Set CMDEX bit in NVM CTRLA register to start the erase sequence */
-		XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
-		XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
-	}
-	else if (EraseCommand == XMEGA_NVM_CMD_ERASEEEPROM)
-	{
-		/* Send the EEPROM page buffer erase command to the target */
-		XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
-		XPROGTarget_SendByte(XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF);
-
-		/* Set CMDEX bit in NVM CTRLA register to start the buffer erase */
-		XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
-		XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
-
-		/* Wait until the NVM controller is no longer busy */
-		if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
-		  return false;
-
-		/* Send the EEPROM memory buffer write command to the target */
-		XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
-		XPROGTarget_SendByte(XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF);
-
-		/* Load the PDI pointer register with the EEPROM page start address */
-		XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATASIZE_4BYTES));
-		XMEGANVM_SendAddress(Address);
-
-		/* Send the REPEAT command with the specified number of bytes to write */
-		XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATASIZE_1BYTE));
-		XPROGTarget_SendByte(XPROG_Param_EEPageSize - 1);
-
-		/* Send a ST command with indirect access and post-increment to tag each byte in the EEPROM page buffer */
-		XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_INDIRECT_PI, PDI_DATASIZE_1BYTE));
-		for (uint8_t PageByte = 0; PageByte < XPROG_Param_EEPageSize; PageByte++)
-		  XPROGTarget_SendByte(0x00);
-
-		/* Send the memory erase command to the target */
-		XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
-		XPROGTarget_SendByte(EraseCommand);
-
-		/* Set CMDEX bit in NVM CTRLA register to start the EEPROM erase sequence */
-		XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
-		XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
-	}
-	else
-	{
-		/* Send the memory erase command to the target */
-		XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
-		XPROGTarget_SendByte(EraseCommand);
-
-		/* Other erase modes just need us to address a byte within the target memory space */
-		XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATASIZE_4BYTES, PDI_DATASIZE_1BYTE));
-		XMEGANVM_SendAddress(Address);
-		XPROGTarget_SendByte(0x00);
-	}
-
-	/* Wait until the NVM bus is ready again */
-	if (!(XMEGANVM_WaitWhileNVMBusBusy()))
-	  return false;
-
-	return true;
-}
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h
deleted file mode 100644
index d038b6c0b5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for XMEGANVM.c.
- */
-
-#ifndef _XMEGA_NVM_
-#define _XMEGA_NVM_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-
-		#include <LUFA/Common/Common.h>
-
-		#include "XPROGProtocol.h"
-		#include "XPROGTarget.h"
-		#include "Config/AppConfig.h"
-
-	/* Preprocessor Checks: */
-		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
-			#undef ENABLE_ISP_PROTOCOL
-
-			#if !defined(ENABLE_XPROG_PROTOCOL)
-				#define ENABLE_XPROG_PROTOCOL
-			#endif
-		#endif
-
-	/* Defines: */
-		#define XMEGA_CRC_LENGTH_BYTES               3
-
-		#define XMEGA_NVM_REG_ADDR0                  0x00
-		#define XMEGA_NVM_REG_ADDR1                  0x01
-		#define XMEGA_NVM_REG_ADDR2                  0x02
-		#define XMEGA_NVM_REG_DAT0                   0x04
-		#define XMEGA_NVM_REG_DAT1                   0x05
-		#define XMEGA_NVM_REG_DAT2                   0x06
-		#define XMEGA_NVM_REG_CMD                    0x0A
-		#define XMEGA_NVM_REG_CTRLA                  0x0B
-		#define XMEGA_NVM_REG_CTRLB                  0x0C
-		#define XMEGA_NVM_REG_INTCTRL                0x0D
-		#define XMEGA_NVM_REG_STATUS                 0x0F
-		#define XMEGA_NVM_REG_LOCKBITS               0x10
-
-		#define XMEGA_NVM_BIT_CTRLA_CMDEX            (1 << 0)
-
-		#define XMEGA_NVM_CMD_NOOP                   0x00
-		#define XMEGA_NVM_CMD_CHIPERASE              0x40
-		#define XMEGA_NVM_CMD_READNVM                0x43
-		#define XMEGA_NVM_CMD_LOADFLASHPAGEBUFF      0x23
-		#define XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF     0x26
-		#define XMEGA_NVM_CMD_ERASEFLASHPAGE         0x2B
-		#define XMEGA_NVM_CMD_WRITEFLASHPAGE         0x2E
-		#define XMEGA_NVM_CMD_ERASEWRITEFLASH        0x2F
-		#define XMEGA_NVM_CMD_FLASHCRC               0x78
-		#define XMEGA_NVM_CMD_ERASEAPPSEC            0x20
-		#define XMEGA_NVM_CMD_ERASEAPPSECPAGE        0x22
-		#define XMEGA_NVM_CMD_WRITEAPPSECPAGE        0x24
-		#define XMEGA_NVM_CMD_ERASEWRITEAPPSECPAGE   0x25
-		#define XMEGA_NVM_CMD_APPCRC                 0x38
-		#define XMEGA_NVM_CMD_ERASEBOOTSEC           0x68
-		#define XMEGA_NVM_CMD_ERASEBOOTSECPAGE       0x2A
-		#define XMEGA_NVM_CMD_WRITEBOOTSECPAGE       0x2C
-		#define XMEGA_NVM_CMD_ERASEWRITEBOOTSECPAGE  0x2D
-		#define XMEGA_NVM_CMD_BOOTCRC                0x39
-		#define XMEGA_NVM_CMD_READUSERSIG            0x03
-		#define XMEGA_NVM_CMD_ERASEUSERSIG           0x18
-		#define XMEGA_NVM_CMD_WRITEUSERSIG           0x1A
-		#define XMEGA_NVM_CMD_READCALIBRATION        0x02
-		#define XMEGA_NVM_CMD_READFUSE               0x07
-		#define XMEGA_NVM_CMD_WRITEFUSE              0x4C
-		#define XMEGA_NVM_CMD_WRITELOCK              0x08
-		#define XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF     0x33
-		#define XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF    0x36
-		#define XMEGA_NVM_CMD_ERASEEEPROM            0x30
-		#define XMEGA_NVM_CMD_ERASEEEPROMPAGE        0x32
-		#define XMEGA_NVM_CMD_WRITEEEPROMPAGE        0x34
-		#define XMEGA_NVM_CMD_ERASEWRITEEEPROMPAGE   0x35
-		#define XMEGA_NVM_CMD_READEEPROM             0x06
-
-	/* Function Prototypes: */
-		bool XMEGANVM_WaitWhileNVMBusBusy(void);
-		bool XMEGANVM_WaitWhileNVMControllerBusy(void);
-		bool XMEGANVM_EnablePDI(void);
-		void XMEGANVM_DisablePDI(void);
-		bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand,
-			                       uint32_t* const CRCDest);
-		bool XMEGANVM_ReadMemory(const uint32_t ReadAddress,
-		                         uint8_t* ReadBuffer,
-		                         uint16_t ReadSize);
-		bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand,
-		                              const uint32_t WriteAddress,
-		                              const uint8_t Byte);
-		bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand,
-		                              const uint8_t EraseBuffCommand,
-		                              const uint8_t WritePageCommand,
-		                              const uint8_t PageMode,
-		                              const uint32_t WriteAddress,
-		                              const uint8_t* WriteBuffer,
-		                              uint16_t WriteSize);
-		bool XMEGANVM_EraseMemory(const uint8_t EraseCommand,
-		                          const uint32_t Address);
-
-		#if defined(INCLUDE_FROM_XMEGANVM_C)
-			static void XMEGANVM_SendNVMRegAddress(const uint8_t Register);
-			static void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
deleted file mode 100644
index 0915f97cc6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
+++ /dev/null
@@ -1,480 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  XPROG Protocol handler, to process V2 Protocol wrapped XPROG commands used in Atmel programmer devices.
- */
-
-#define  INCLUDE_FROM_XPROGPROTOCOL_C
-#include "XPROGProtocol.h"
-
-#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
-/** Base absolute address for the target's NVM controller for PDI programming */
-uint32_t XPROG_Param_NVMBase       = 0x010001C0;
-
-/** Size in bytes of the target's EEPROM page */
-uint16_t XPROG_Param_EEPageSize    = 32;
-
-/** Address of the TPI device's NVMCMD register for TPI programming */
-uint8_t  XPROG_Param_NVMCMDRegAddr = 0x33;
-
-/** Address of the TPI device's NVMCSR register for TPI programming */
-uint8_t  XPROG_Param_NVMCSRRegAddr = 0x32;
-
-/** Currently selected XPROG programming protocol */
-uint8_t  XPROG_SelectedProtocol    = XPROG_PROTOCOL_PDI;
-
-/** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI/TPI
- *  programming.
- */
-void XPROGProtocol_SetMode(void)
-{
-	struct
-	{
-		uint8_t Protocol;
-	} SetMode_XPROG_Params;
-
-	Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params), NULL);
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	XPROG_SelectedProtocol = SetMode_XPROG_Params.Protocol;
-
-	Endpoint_Write_8(CMD_XPROG_SETMODE);
-	Endpoint_Write_8((SetMode_XPROG_Params.Protocol != XPROG_PROTOCOL_JTAG) ? STATUS_CMD_OK : STATUS_CMD_FAILED);
-	Endpoint_ClearIN();
-}
-
-/** Handler for the CMD_XPROG command, which wraps up XPROG commands in a V2 wrapper which need to be
- *  removed and processed so that the underlying XPROG command can be handled.
- */
-void XPROGProtocol_Command(void)
-{
-	uint8_t XPROGCommand = Endpoint_Read_8();
-
-	switch (XPROGCommand)
-	{
-		case XPROG_CMD_ENTER_PROGMODE:
-			XPROGProtocol_EnterXPROGMode();
-			break;
-		case XPROG_CMD_LEAVE_PROGMODE:
-			XPROGProtocol_LeaveXPROGMode();
-			break;
-		case XPROG_CMD_ERASE:
-			XPROGProtocol_Erase();
-			break;
-		case XPROG_CMD_WRITE_MEM:
-			XPROGProtocol_WriteMemory();
-			break;
-		case XPROG_CMD_READ_MEM:
-			XPROGProtocol_ReadMemory();
-			break;
-		case XPROG_CMD_CRC:
-			XPROGProtocol_ReadCRC();
-			break;
-		case XPROG_CMD_SET_PARAM:
-			XPROGProtocol_SetParam();
-			break;
-	}
-}
-
-/** Handler for the XPROG ENTER_PROGMODE command to establish a connection with the attached device. */
-static void XPROGProtocol_EnterXPROGMode(void)
-{
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	bool NVMBusEnabled = false;
-
-	if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
-	  NVMBusEnabled = XMEGANVM_EnablePDI();
-	else if (XPROG_SelectedProtocol == XPROG_PROTOCOL_TPI)
-	  NVMBusEnabled = TINYNVM_EnableTPI();
-
-	Endpoint_Write_8(CMD_XPROG);
-	Endpoint_Write_8(XPROG_CMD_ENTER_PROGMODE);
-	Endpoint_Write_8(NVMBusEnabled ? XPROG_ERR_OK : XPROG_ERR_FAILED);
-	Endpoint_ClearIN();
-}
-
-/** Handler for the XPROG LEAVE_PROGMODE command to terminate the PDI programming connection with
- *  the attached device.
- */
-static void XPROGProtocol_LeaveXPROGMode(void)
-{
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
-	  XMEGANVM_DisablePDI();
-	else
-	  TINYNVM_DisableTPI();
-
-	#if defined(XCK_RESCUE_CLOCK_ENABLE) && defined(ENABLE_ISP_PROTOCOL)
-	/* If the XCK rescue clock option is enabled, we need to restart it once the
-	 * XPROG mode has been exited, since the XPROG protocol stops it after use. */
-	ISPTarget_ConfigureRescueClock();
-	#endif
-
-	Endpoint_Write_8(CMD_XPROG);
-	Endpoint_Write_8(XPROG_CMD_LEAVE_PROGMODE);
-	Endpoint_Write_8(XPROG_ERR_OK);
-	Endpoint_ClearIN();
-}
-
-/** Handler for the XPRG ERASE command to erase a specific memory address space in the attached device. */
-static void XPROGProtocol_Erase(void)
-{
-	uint8_t ReturnStatus = XPROG_ERR_OK;
-
-	struct
-	{
-		uint8_t  MemoryType;
-		uint32_t Address;
-	} Erase_XPROG_Params;
-
-	Endpoint_Read_Stream_LE(&Erase_XPROG_Params, sizeof(Erase_XPROG_Params), NULL);
-	Erase_XPROG_Params.Address = SwapEndian_32(Erase_XPROG_Params.Address);
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	uint8_t EraseCommand;
-
-	if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
-	{
-		/* Determine which NVM command to send to the device depending on the memory to erase */
-		switch (Erase_XPROG_Params.MemoryType)
-		{
-			case XPROG_ERASE_CHIP:
-				EraseCommand = XMEGA_NVM_CMD_CHIPERASE;
-				break;
-			case XPROG_ERASE_APP:
-				EraseCommand = XMEGA_NVM_CMD_ERASEAPPSEC;
-				break;
-			case XPROG_ERASE_BOOT:
-				EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSEC;
-				break;
-			case XPROG_ERASE_EEPROM:
-				EraseCommand = XMEGA_NVM_CMD_ERASEEEPROM;
-				break;
-			case XPROG_ERASE_APP_PAGE:
-				EraseCommand = XMEGA_NVM_CMD_ERASEAPPSECPAGE;
-				break;
-			case XPROG_ERASE_BOOT_PAGE:
-				EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSECPAGE;
-				break;
-			case XPROG_ERASE_EEPROM_PAGE:
-				EraseCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGE;
-				break;
-			case XPROG_ERASE_USERSIG:
-				EraseCommand = XMEGA_NVM_CMD_ERASEUSERSIG;
-				break;
-			default:
-				EraseCommand = XMEGA_NVM_CMD_NOOP;
-				break;
-		}
-
-		/* Erase the target memory, indicate timeout if occurred */
-		if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
-		  ReturnStatus = XPROG_ERR_TIMEOUT;
-	}
-	else
-	{
-		if (Erase_XPROG_Params.MemoryType == XPROG_ERASE_CHIP)
-		  EraseCommand = TINY_NVM_CMD_CHIPERASE;
-		else
-		  EraseCommand = TINY_NVM_CMD_SECTIONERASE;
-
-		/* Erase the target memory, indicate timeout if occurred */
-		if (!(TINYNVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
-		  ReturnStatus = XPROG_ERR_TIMEOUT;
-	}
-
-	Endpoint_Write_8(CMD_XPROG);
-	Endpoint_Write_8(XPROG_CMD_ERASE);
-	Endpoint_Write_8(ReturnStatus);
-	Endpoint_ClearIN();
-}
-
-/** Handler for the XPROG WRITE_MEMORY command to write to a specific memory space within the attached device. */
-static void XPROGProtocol_WriteMemory(void)
-{
-	uint8_t ReturnStatus = XPROG_ERR_OK;
-
-	struct
-	{
-		uint8_t  MemoryType;
-		uint8_t  PageMode;
-		uint32_t Address;
-		uint16_t Length;
-		uint8_t  ProgData[256];
-	} WriteMemory_XPROG_Params;
-
-	Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) -
-	                                                    sizeof(WriteMemory_XPROG_Params).ProgData), NULL);
-	WriteMemory_XPROG_Params.Address = SwapEndian_32(WriteMemory_XPROG_Params.Address);
-	WriteMemory_XPROG_Params.Length  = SwapEndian_16(WriteMemory_XPROG_Params.Length);
-	Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length, NULL);
-
-	// The driver will terminate transfers that are a round multiple of the endpoint bank in size with a ZLP, need
-	// to catch this and discard it before continuing on with packet processing to prevent communication issues
-	if (((sizeof(uint8_t) + sizeof(WriteMemory_XPROG_Params) - sizeof(WriteMemory_XPROG_Params.ProgData)) +
-	    WriteMemory_XPROG_Params.Length) % AVRISP_DATA_EPSIZE == 0)
-	{
-		Endpoint_ClearOUT();
-		Endpoint_WaitUntilReady();
-	}
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
-	{
-		/* Assume FLASH page programming by default, as it is the common case */
-		uint8_t WriteCommand     = XMEGA_NVM_CMD_WRITEFLASHPAGE;
-		uint8_t WriteBuffCommand = XMEGA_NVM_CMD_LOADFLASHPAGEBUFF;
-		uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF;
-		bool    PagedMemory      = true;
-
-		switch (WriteMemory_XPROG_Params.MemoryType)
-		{
-			case XPROG_MEM_TYPE_APPL:
-				WriteCommand     = XMEGA_NVM_CMD_WRITEAPPSECPAGE;
-				break;
-			case XPROG_MEM_TYPE_BOOT:
-				WriteCommand     = XMEGA_NVM_CMD_WRITEBOOTSECPAGE;
-				break;
-			case XPROG_MEM_TYPE_EEPROM:
-				WriteCommand     = XMEGA_NVM_CMD_ERASEWRITEEEPROMPAGE;
-				WriteBuffCommand = XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF;
-				EraseBuffCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF;
-				break;
-			case XPROG_MEM_TYPE_USERSIG:
-				WriteCommand     = XMEGA_NVM_CMD_WRITEUSERSIG;
-				break;
-			case XPROG_MEM_TYPE_FUSE:
-				WriteCommand     = XMEGA_NVM_CMD_WRITEFUSE;
-				PagedMemory      = false;
-				break;
-			case XPROG_MEM_TYPE_LOCKBITS:
-				WriteCommand     = XMEGA_NVM_CMD_WRITELOCK;
-				PagedMemory      = false;
-				break;
-		}
-
-		/* Send the appropriate memory write commands to the device, indicate timeout if occurred */
-		if ((PagedMemory && !(XMEGANVM_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand,
-													   WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address,
-													   WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length))) ||
-		   (!PagedMemory && !(XMEGANVM_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address,
-													   WriteMemory_XPROG_Params.ProgData[0]))))
-		{
-			ReturnStatus = XPROG_ERR_TIMEOUT;
-		}
-	}
-	else
-	{
-		/* Send write command to the TPI device, indicate timeout if occurred */
-		if (!(TINYNVM_WriteMemory(WriteMemory_XPROG_Params.Address, WriteMemory_XPROG_Params.ProgData,
-		      WriteMemory_XPROG_Params.Length)))
-		{
-			ReturnStatus = XPROG_ERR_TIMEOUT;
-		}
-	}
-
-	Endpoint_Write_8(CMD_XPROG);
-	Endpoint_Write_8(XPROG_CMD_WRITE_MEM);
-	Endpoint_Write_8(ReturnStatus);
-	Endpoint_ClearIN();
-}
-
-/** Handler for the XPROG READ_MEMORY command to read data from a specific address space within the
- *  attached device.
- */
-static void XPROGProtocol_ReadMemory(void)
-{
-	uint8_t ReturnStatus = XPROG_ERR_OK;
-
-	struct
-	{
-		uint8_t  MemoryType;
-		uint32_t Address;
-		uint16_t Length;
-	} ReadMemory_XPROG_Params;
-
-	Endpoint_Read_Stream_LE(&ReadMemory_XPROG_Params, sizeof(ReadMemory_XPROG_Params), NULL);
-	ReadMemory_XPROG_Params.Address = SwapEndian_32(ReadMemory_XPROG_Params.Address);
-	ReadMemory_XPROG_Params.Length  = SwapEndian_16(ReadMemory_XPROG_Params.Length);
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	uint8_t ReadBuffer[256];
-
-	if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
-	{
-		/* Read the PDI target's memory, indicate timeout if occurred */
-		if (!(XMEGANVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
-		  ReturnStatus = XPROG_ERR_TIMEOUT;
-	}
-	else
-	{
-		/* Read the TPI target's memory, indicate timeout if occurred */
-		if (!(TINYNVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
-		  ReturnStatus = XPROG_ERR_TIMEOUT;
-	}
-
-	Endpoint_Write_8(CMD_XPROG);
-	Endpoint_Write_8(XPROG_CMD_READ_MEM);
-	Endpoint_Write_8(ReturnStatus);
-
-	if (ReturnStatus == XPROG_ERR_OK)
-	  Endpoint_Write_Stream_LE(ReadBuffer, ReadMemory_XPROG_Params.Length, NULL);
-
-	Endpoint_ClearIN();
-}
-
-/** Handler for the XPROG CRC command to read a specific memory space's CRC value for comparison between the
- *  attached device's memory and a data set on the host.
- */
-static void XPROGProtocol_ReadCRC(void)
-{
-	uint8_t ReturnStatus = XPROG_ERR_OK;
-
-	struct
-	{
-		uint8_t CRCType;
-	} ReadCRC_XPROG_Params;
-
-	Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params), NULL);
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	uint32_t MemoryCRC;
-
-	if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
-	{
-		uint8_t CRCCommand;
-
-		/* Determine which NVM command to send to the device depending on the memory to CRC */
-		switch (ReadCRC_XPROG_Params.CRCType)
-		{
-			case XPROG_CRC_APP:
-				CRCCommand = XMEGA_NVM_CMD_APPCRC;
-				break;
-			case XPROG_CRC_BOOT:
-				CRCCommand = XMEGA_NVM_CMD_BOOTCRC;
-				break;
-			default:
-				CRCCommand = XMEGA_NVM_CMD_FLASHCRC;
-				break;
-		}
-
-		/* Perform and retrieve the memory CRC, indicate timeout if occurred */
-		if (!(XMEGANVM_GetMemoryCRC(CRCCommand, &MemoryCRC)))
-		  ReturnStatus = XPROG_ERR_TIMEOUT;
-	}
-	else
-	{
-		/* TPI does not support memory CRC */
-		ReturnStatus = XPROG_ERR_FAILED;
-	}
-
-	Endpoint_Write_8(CMD_XPROG);
-	Endpoint_Write_8(XPROG_CMD_CRC);
-	Endpoint_Write_8(ReturnStatus);
-
-	if (ReturnStatus == XPROG_ERR_OK)
-	{
-		Endpoint_Write_8(MemoryCRC >> 16);
-		Endpoint_Write_16_LE(MemoryCRC & 0xFFFF);
-	}
-
-	Endpoint_ClearIN();
-}
-
-/** Handler for the XPROG SET_PARAM command to set a XPROG parameter for use when communicating with the
- *  attached device.
- */
-static void XPROGProtocol_SetParam(void)
-{
-	uint8_t ReturnStatus = XPROG_ERR_OK;
-
-	uint8_t XPROGParam = Endpoint_Read_8();
-
-	/* Determine which parameter is being set, store the new parameter value */
-	switch (XPROGParam)
-	{
-		case XPROG_PARAM_NVMBASE:
-			XPROG_Param_NVMBase       = Endpoint_Read_32_BE();
-			break;
-		case XPROG_PARAM_EEPPAGESIZE:
-			XPROG_Param_EEPageSize    = Endpoint_Read_16_BE();
-			break;
-		case XPROG_PARAM_NVMCMD_REG:
-			XPROG_Param_NVMCMDRegAddr = Endpoint_Read_8();
-			break;
-		case XPROG_PARAM_NVMCSR_REG:
-			XPROG_Param_NVMCSRRegAddr = Endpoint_Read_8();
-			break;
-		case XPROG_PARAM_UNKNOWN_1:
-			/* TODO: Undocumented parameter added in AVRStudio 5.1, purpose unknown. Must ACK and discard or
-			         the communication with AVRStudio 5.1 will fail.
-			*/
-			Endpoint_Discard_16();
-			break;
-		default:
-			ReturnStatus = XPROG_ERR_FAILED;
-			break;
-	}
-
-	Endpoint_ClearOUT();
-	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
-	Endpoint_Write_8(CMD_XPROG);
-	Endpoint_Write_8(XPROG_CMD_SET_PARAM);
-	Endpoint_Write_8(ReturnStatus);
-	Endpoint_ClearIN();
-}
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
deleted file mode 100644
index 830abc26da..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for XPROGProtocol.c.
- */
-
-#ifndef _XPROG_PROTOCOL_
-#define _XPROG_PROTOCOL_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <util/delay.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "../V2Protocol.h"
-		#include "XMEGANVM.h"
-		#include "TINYNVM.h"
-		#include "Config/AppConfig.h"
-
-	/* Preprocessor Checks: */
-		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
-			/* On the XPLAIN board, we only need PDI programming
-			   for the ATXMEGA128A1 - disable ISP to prevent hardware
-			   damage and force-enable XPROG.
-			 */
-			#undef ENABLE_ISP_PROTOCOL
-
-			#if !defined(ENABLE_XPROG_PROTOCOL)
-				#define ENABLE_XPROG_PROTOCOL
-			#endif
-		#endif
-
-	/* Macros: */
-		#define XPROG_CMD_ENTER_PROGMODE             0x01
-		#define XPROG_CMD_LEAVE_PROGMODE             0x02
-		#define XPROG_CMD_ERASE                      0x03
-		#define XPROG_CMD_WRITE_MEM                  0x04
-		#define XPROG_CMD_READ_MEM                   0x05
-		#define XPROG_CMD_CRC                        0x06
-		#define XPROG_CMD_SET_PARAM                  0x07
-
-		#define XPROG_MEM_TYPE_APPL                  1
-		#define XPROG_MEM_TYPE_BOOT                  2
-		#define XPROG_MEM_TYPE_EEPROM                3
-		#define XPROG_MEM_TYPE_FUSE                  4
-		#define XPROG_MEM_TYPE_LOCKBITS              5
-		#define XPROG_MEM_TYPE_USERSIG               6
-		#define XPROG_MEM_TYPE_FACTORY_CALIBRATION   7
-
-		#define XPROG_ERASE_CHIP                     1
-		#define XPROG_ERASE_APP                      2
-		#define XPROG_ERASE_BOOT                     3
-		#define XPROG_ERASE_EEPROM                   4
-		#define XPROG_ERASE_APP_PAGE                 5
-		#define XPROG_ERASE_BOOT_PAGE                6
-		#define XPROG_ERASE_EEPROM_PAGE              7
-		#define XPROG_ERASE_USERSIG                  8
-
-		#define XPROG_MEM_WRITE_ERASE                0
-		#define XPROG_MEM_WRITE_WRITE                1
-
-		#define XPROG_CRC_APP                        1
-		#define XPROG_CRC_BOOT                       2
-		#define XPROG_CRC_FLASH                      3
-
-		#define XPROG_ERR_OK                         0
-		#define XPROG_ERR_FAILED                     1
-		#define XPROG_ERR_COLLISION                  2
-		#define XPROG_ERR_TIMEOUT                    3
-
-		#define XPROG_PARAM_NVMBASE                  0x01
-		#define XPROG_PARAM_EEPPAGESIZE              0x02
-		#define XPROG_PARAM_NVMCMD_REG               0x03
-		#define XPROG_PARAM_NVMCSR_REG               0x04
-		#define XPROG_PARAM_UNKNOWN_1                0x05
-
-		#define XPROG_PROTOCOL_PDI                   0x00
-		#define XPROG_PROTOCOL_JTAG                  0x01
-		#define XPROG_PROTOCOL_TPI                   0x02
-
-		#define XPROG_PAGEMODE_WRITE                 (1 << 1)
-		#define XPROG_PAGEMODE_ERASE                 (1 << 0)
-
-	/* External Variables: */
-		extern uint32_t XPROG_Param_NVMBase;
-		extern uint16_t XPROG_Param_EEPageSize;
-		extern uint8_t  XPROG_Param_NVMCSRRegAddr;
-		extern uint8_t  XPROG_Param_NVMCMDRegAddr;
-
-	/* Function Prototypes: */
-		void XPROGProtocol_SetMode(void);
-		void XPROGProtocol_Command(void);
-
-		#if (defined(INCLUDE_FROM_XPROGPROTOCOL_C) && defined(ENABLE_XPROG_PROTOCOL))
-			static void XPROGProtocol_EnterXPROGMode(void);
-			static void XPROGProtocol_LeaveXPROGMode(void);
-			static void XPROGProtocol_SetParam(void);
-			static void XPROGProtocol_Erase(void);
-			static void XPROGProtocol_WriteMemory(void);
-			static void XPROGProtocol_ReadMemory(void);
-			static void XPROGProtocol_ReadCRC(void);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
deleted file mode 100644
index 75b43f0fed..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Target-related functions for the PDI Protocol decoder.
- */
-
-#define  INCLUDE_FROM_XPROGTARGET_C
-#include "XPROGTarget.h"
-
-#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
-
-/** Flag to indicate if the USART is currently in Tx or Rx mode. */
-bool IsSending;
-
-/** Enables the target's PDI interface, holding the target in reset until PDI mode is exited. */
-void XPROGTarget_EnableTargetPDI(void)
-{
-	IsSending = false;
-
-	/* Set Tx and XCK as outputs, Rx as input */
-	DDRD |=  (1 << 5) | (1 << 3);
-	DDRD &= ~(1 << 2);
-
-	/* Set DATA line high for at least 90ns to disable /RESET functionality */
-	PORTD |= (1 << 3);
-	_delay_us(100);
-
-	/* Set up the synchronous USART for XMEGA communications - 8 data bits, even parity, 2 stop bits */
-	UBRR1  = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1);
-	UCSR1B = (1 << TXEN1);
-	UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
-
-	/* Send two IDLEs of 12 bits each to enable PDI interface (need at least 16 idle bits) */
-	XPROGTarget_SendIdle();
-	XPROGTarget_SendIdle();
-}
-
-/** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */
-void XPROGTarget_EnableTargetTPI(void)
-{
-	IsSending = false;
-
-	/* Set /RESET line low for at least 400ns to enable TPI functionality */
-	AUX_LINE_DDR  |=  AUX_LINE_MASK;
-	AUX_LINE_PORT &= ~AUX_LINE_MASK;
-	_delay_us(100);
-
-	/* Set Tx and XCK as outputs, Rx as input */
-	DDRD |=  (1 << 5) | (1 << 3);
-	DDRD &= ~(1 << 2);
-
-	/* Set up the synchronous USART for TPI communications - 8 data bits, even parity, 2 stop bits */
-	UBRR1  = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1);
-	UCSR1B = (1 << TXEN1);
-	UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
-
-	/* Send two IDLEs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
-	XPROGTarget_SendIdle();
-	XPROGTarget_SendIdle();
-}
-
-/** Disables the target's PDI interface, exits programming mode and starts the target's application. */
-void XPROGTarget_DisableTargetPDI(void)
-{
-	/* Switch to Rx mode to ensure that all pending transmissions are complete */
-	if (IsSending)
-	  XPROGTarget_SetRxMode();
-
-	/* Turn off receiver and transmitter of the USART, clear settings */
-	UCSR1A  = ((1 << TXC1) | (1 << RXC1));
-	UCSR1B  = 0;
-	UCSR1C  = 0;
-
-	/* Tristate all pins */
-	DDRD  &= ~((1 << 5) | (1 << 3));
-	PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
-}
-
-/** Disables the target's TPI interface, exits programming mode and starts the target's application. */
-void XPROGTarget_DisableTargetTPI(void)
-{
-	/* Switch to Rx mode to ensure that all pending transmissions are complete */
-	if (IsSending)
-	  XPROGTarget_SetRxMode();
-
-	/* Turn off receiver and transmitter of the USART, clear settings */
-	UCSR1A |= (1 << TXC1) | (1 << RXC1);
-	UCSR1B  = 0;
-	UCSR1C  = 0;
-
-	/* Set all USART lines as inputs, tristate */
-	DDRD  &= ~((1 << 5) | (1 << 3));
-	PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
-
-	/* Tristate target /RESET line */
-	AUX_LINE_DDR  &= ~AUX_LINE_MASK;
-	AUX_LINE_PORT &= ~AUX_LINE_MASK;
-}
-
-/** Sends a byte via the USART.
- *
- *  \param[in] Byte  Byte to send through the USART
- */
-void XPROGTarget_SendByte(const uint8_t Byte)
-{
-	/* Switch to Tx mode if currently in Rx mode */
-	if (!(IsSending))
-	  XPROGTarget_SetTxMode();
-
-	/* Wait until there is space in the hardware Tx buffer before writing */
-	while (!(UCSR1A & (1 << UDRE1)));
-	UCSR1A |= (1 << TXC1);
-	UDR1    = Byte;
-}
-
-/** Receives a byte via the hardware USART, blocking until data is received or timeout expired.
- *
- *  \return Received byte from the USART
- */
-uint8_t XPROGTarget_ReceiveByte(void)
-{
-	/* Switch to Rx mode if currently in Tx mode */
-	if (IsSending)
-	  XPROGTarget_SetRxMode();
-
-	/* Wait until a byte has been received before reading */
-	while (!(UCSR1A & (1 << RXC1)) && TimeoutTicksRemaining);
-
-	return UDR1;
-}
-
-/** Sends an IDLE via the USART to the attached target, consisting of a full frame of idle bits. */
-void XPROGTarget_SendIdle(void)
-{
-	/* Switch to Tx mode if currently in Rx mode */
-	if (!(IsSending))
-	  XPROGTarget_SetTxMode();
-
-	/* Need to do nothing for a full frame to send an IDLE */
-	for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++)
-	{
-		/* Wait for a full cycle of the clock */
-		while (PIND & (1 << 5));
-		while (!(PIND & (1 << 5)));
-		while (PIND & (1 << 5));
-	}
-}
-
-static void XPROGTarget_SetTxMode(void)
-{
-	/* Wait for a full cycle of the clock */
-	while (PIND & (1 << 5));
-	while (!(PIND & (1 << 5)));
-	while (PIND & (1 << 5));
-
-	PORTD  |=  (1 << 3);
-	DDRD   |=  (1 << 3);
-
-	UCSR1B &= ~(1 << RXEN1);
-	UCSR1B |=  (1 << TXEN1);
-
-	IsSending = true;
-}
-
-static void XPROGTarget_SetRxMode(void)
-{
-	while (!(UCSR1A & (1 << TXC1)));
-	UCSR1A |=  (1 << TXC1);
-
-	UCSR1B &= ~(1 << TXEN1);
-	UCSR1B |=  (1 << RXEN1);
-
-	DDRD   &= ~(1 << 3);
-	PORTD  &= ~(1 << 3);
-
-	IsSending = false;
-}
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
deleted file mode 100644
index 560d39d967..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for XPROGTarget.c.
- */
-
-#ifndef _XPROG_TARGET_
-#define _XPROG_TARGET_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-
-		#include <LUFA/Common/Common.h>
-
-		#include "../V2Protocol.h"
-		#include "XPROGProtocol.h"
-		#include "Config/AppConfig.h"
-
-	/* Preprocessor Checks: */
-		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
-			#undef ENABLE_ISP_PROTOCOL
-
-			#if !defined(ENABLE_XPROG_PROTOCOL)
-				#define ENABLE_XPROG_PROTOCOL
-			#endif
-		#endif
-
-		/** Serial carrier TPI/PDI speed in Hz, when hardware TPI/PDI mode is used. */
-		#define XPROG_HARDWARE_SPEED       2000000
-
-		/** Total number of bits in a single USART frame. */
-		#define BITS_IN_USART_FRAME        12
-
- 		/** \name PDI Related Constants
- 		 * @{
- 		 */
-		#define PDI_CMD_LDS(AddressSize, DataSize)  (0x00 | (  AddressSize << 2) | DataSize)
-		#define PDI_CMD_LD(PointerAccess, DataSize) (0x20 | (PointerAccess << 2) | DataSize)
-		#define PDI_CMD_STS(AddressSize, DataSize)  (0x40 | (  AddressSize << 2) | DataSize)
-		#define PDI_CMD_ST(PointerAccess, DataSize) (0x60 | (PointerAccess << 2) | DataSize)
-		#define PDI_CMD_LDCS(PDIReg)                (0x80 | PDIReg)
-		#define PDI_CMD_REPEAT(DataSize)            (0xA0 | DataSize)
-		#define PDI_CMD_STCS(PDIReg)                (0xC0 | PDIReg)
-		#define PDI_CMD_KEY                         0xE0
-
-		#define PDI_REG_STATUS             0
-		#define PDI_REG_RESET              1
-		#define PDI_REG_CTRL               2
-
-		#define PDI_STATUS_NVM             (1 << 1)
-
-		#define PDI_RESET_KEY              0x59
-		#define PDI_NVMENABLE_KEY          (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF}
-
-		#define PDI_DATASIZE_1BYTE         0
-		#define PDI_DATASIZE_2BYTES        1
-		#define PDI_DATASIZE_3BYTES        2
-		#define PDI_DATASIZE_4BYTES        3
-
-		#define PDI_POINTER_INDIRECT       0
-		#define PDI_POINTER_INDIRECT_PI    1
-		#define PDI_POINTER_DIRECT         2
- 		/** @} */
-
- 		/** \name TPI Related Constants
- 		 * @{
- 		 */
- 		#define TPI_CMD_SLD(PointerAccess) (0x20 | PointerAccess)
-		#define TPI_CMD_SST(PointerAccess) (0x60 | PointerAccess)
-		#define TPI_CMD_SSTPR              0x68
-		#define TPI_CMD_SIN(Address)       (0x10 | ((Address & 0x30) << 1) | (Address & 0x0F))
-		#define TPI_CMD_SOUT(Address)      (0x90 | ((Address & 0x30) << 1) | (Address & 0x0F))
-		#define TPI_CMD_SLDCS(TPIReg)      (0x80 | TPIReg)
-		#define TPI_CMD_SSTCS(TPIReg)      (0xC0 | TPIReg)
-		#define TPI_CMD_SKEY               0xE0
-
-		#define TPI_REG_STATUS             0x00
-		#define TPI_REG_CTRL               0x02
-		#define TPI_REG_ID                 0x0F
-
-		#define TPI_STATUS_NVM             (1 << 1)
-
-		#define TPI_NVMENABLE_KEY          (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF}
-
-		#define TPI_POINTER_INDIRECT       0
-		#define TPI_POINTER_INDIRECT_PI    4
- 		/** @} */
-
-	/* Function Prototypes: */
-		void    XPROGTarget_EnableTargetPDI(void);
-		void    XPROGTarget_EnableTargetTPI(void);
-		void    XPROGTarget_DisableTargetPDI(void);
-		void    XPROGTarget_DisableTargetTPI(void);
-		void    XPROGTarget_SendByte(const uint8_t Byte);
-		uint8_t XPROGTarget_ReceiveByte(void);
-		void    XPROGTarget_SendIdle(void);
-		bool    XPROGTarget_WaitWhileNVMBusBusy(void);
-
-		#if (defined(INCLUDE_FROM_XPROGTARGET_C) && defined(ENABLE_XPROG_PROTOCOL))
-			static void XPROGTarget_SetTxMode(void);
-			static void XPROGTarget_SetRxMode(void);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/asf.xml
deleted file mode 100644
index d89b8852f8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/asf.xml
+++ /dev/null
@@ -1,90 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="AVRISP-MKII Clone Programmer" id="lufa.projects.avrispmkii_clone.avr8">

- 		<require idref="lufa.projects.avrispmkii_clone"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<!-- Required by the XPLAIN Bridge project as well, so split into a meta module -->

-	<module type="meta" id="lufa.projects.avrispmkii_clone.src" caption="AVRISP-MKII Clone Programmer">

-		<info type="gui-flag" value="hidden"/>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<build type="include-path" value="."/>

-

-		<build type="c-source" value="AVRISPDescriptors.c"/>

-		<build type="header-file" value="AVRISPDescriptors.h"/>

-

-		<build type="include-path" value="Lib"/>

-

-		<build type="header-file" value="Lib/V2ProtocolConstants.h"/>

-		<build type="c-source" value="Lib/V2Protocol.c"/>

-		<build type="header-file" value="Lib/V2Protocol.h"/>

-		<build type="c-source" value="Lib/V2ProtocolParams.c"/>

-		<build type="header-file" value="Lib/V2ProtocolParams.h"/>

-		<build type="c-source" value="Lib/ISP/ISPProtocol.c"/>

-		<build type="header-file" value="Lib/ISP/ISPProtocol.h"/>

-		<build type="c-source" value="Lib/ISP/ISPTarget.c"/>

-		<build type="header-file" value="Lib/ISP/ISPTarget.h"/>

-		<build type="c-source" value="Lib/XPROG/XPROGTarget.c"/>

-		<build type="header-file" value="Lib/XPROG/XPROGTarget.h"/>

-		<build type="c-source" value="Lib/XPROG/XPROGProtocol.c"/>

-		<build type="header-file" value="Lib/XPROG/XPROGProtocol.h"/>

-		<build type="c-source" value="Lib/XPROG/XMEGANVM.c"/>

-		<build type="header-file" value="Lib/XPROG/XMEGANVM.h"/>

-		<build type="c-source" value="Lib/XPROG/TINYNVM.c"/>

-		<build type="header-file" value="Lib/XPROG/TINYNVM.h"/>

-

-		<require idref="lufa.drivers.peripheral.adc"/>

-		<require idref="lufa.drivers.peripheral.spi"/>

-	</module>

-

-	<module type="application" id="lufa.projects.avrispmkii_clone" caption="AVRISP-MKII Clone Programmer">

-		<info type="description" value="summary">

-		Clone firmware of the Atmel AVRISP-MKII programmer.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="AVRISP-MKII.txt"/>

-

-		<build type="c-source" value="AVRISP-MKII.c"/>

-		<build type="header-file" value="AVRISP-MKII.h"/>

-

-		<require idref="lufa.projects.avrispmkii_clone.src"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.adc"/>

-		<require idref="lufa.drivers.peripheral.spi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/doxyfile
deleted file mode 100644
index 6c8698751a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "AVRISP-MKII Clone Programmer Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/makefile
deleted file mode 100644
index c89648d5a4..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/AVRISP-MKII/makefile
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = AVRISP-MKII
-SRC          = $(TARGET).c AVRISPDescriptors.c Lib/V2Protocol.c Lib/V2ProtocolParams.c Lib/ISP/ISPProtocol.c Lib/ISP/ISPTarget.c Lib/XPROG/XPROGProtocol.c \
-               Lib/XPROG/XPROGTarget.c Lib/XPROG/XMEGANVM.c Lib/XPROG/TINYNVM.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Benito.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Benito.c
deleted file mode 100644
index b5a0560f7f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Benito.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the Benito project. This file contains the main tasks of
- *  the project and is responsible for the initial application hardware configuration.
- */
-
-#include "Benito.h"
-
-/** Circular buffer to hold data from the serial port before it is sent to the host. */
-static RingBuffer_t USARTtoUSB_Buffer;
-
-/** Underlying data buffer for \ref USARTtoUSB_Buffer, where the stored bytes are located. */
-static uint8_t      USARTtoUSB_Buffer_Data[128];
-
-/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */
-volatile struct
-{
-	uint8_t ResetPulse; /**< Milliseconds remaining for target /RESET pulse */
-	uint8_t TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */
-	uint8_t RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */
-	uint8_t PingPongLEDPulse; /**< Milliseconds remaining for enumeration Tx/Rx ping-pong LED pulse */
-} PulseMSRemaining;
-
-/** Milliseconds remaining until the receive buffer is flushed to the USB host */
-uint8_t FlushPeriodRemaining = RECEIVE_BUFFER_FLUSH_MS;
-
-/** LUFA CDC Class driver interface configuration and state information. This structure is
- *  passed to all CDC Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
-	{
-		.Config =
-			{
-				.ControlInterfaceNumber   = INTERFACE_ID_CDC_CCI,
-				.DataINEndpoint           =
-					{
-						.Address          = CDC_TX_EPADDR,
-						.Size             = CDC_TXRX_EPSIZE,
-						.Banks            = 1,
-					},
-				.DataOUTEndpoint =
-					{
-						.Address          = CDC_RX_EPADDR,
-						.Size             = CDC_TXRX_EPSIZE,
-						.Banks            = 1,
-					},
-				.NotificationEndpoint =
-					{
-						.Address          = CDC_NOTIFICATION_EPADDR,
-						.Size             = CDC_NOTIFICATION_EPSIZE,
-						.Banks            = 1,
-					},
-			},
-	};
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	RingBuffer_InitBuffer(&USARTtoUSB_Buffer, USARTtoUSB_Buffer_Data, sizeof(USARTtoUSB_Buffer_Data));
-
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		/* Echo bytes from the host to the target via the hardware USART */
-		if ((UCSR1A & (1 << UDRE1)) && CDC_Device_BytesReceived(&VirtualSerial_CDC_Interface))
-		{
-			UDR1 = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
-
-			LEDs_TurnOnLEDs(LEDMASK_TX);
-			PulseMSRemaining.TxLEDPulse = TX_RX_LED_PULSE_MS;
-		}
-
-		/* Check if the millisecond timer has elapsed */
-		if (TIFR0 & (1 << OCF0A))
-		{
-			/* Clear flush timer expiry flag */
-			TIFR0 |= (1 << TOV0);
-
-			/* Check if the reset pulse period has elapsed, if so tristate the target reset line */
-			if (PulseMSRemaining.ResetPulse && !(--PulseMSRemaining.ResetPulse))
-			{
-				LEDs_TurnOffLEDs(LEDMASK_BUSY);
-				AVR_RESET_LINE_DDR &= ~AVR_RESET_LINE_MASK;
-			}
-
-			/* Check if the LEDs should be ping-ponging (during enumeration) */
-			if (PulseMSRemaining.PingPongLEDPulse && !(--PulseMSRemaining.PingPongLEDPulse))
-			{
-				LEDs_ToggleLEDs(LEDMASK_TX | LEDMASK_RX);
-				PulseMSRemaining.PingPongLEDPulse = PING_PONG_LED_PULSE_MS;
-			}
-
-			/* Turn off TX LED(s) once the TX pulse period has elapsed */
-			if (PulseMSRemaining.TxLEDPulse && !(--PulseMSRemaining.TxLEDPulse))
-			  LEDs_TurnOffLEDs(LEDMASK_TX);
-
-			/* Turn off RX LED(s) once the RX pulse period has elapsed */
-			if (PulseMSRemaining.RxLEDPulse && !(--PulseMSRemaining.RxLEDPulse))
-			  LEDs_TurnOffLEDs(LEDMASK_RX);
-
-			/* Check if the receive buffer flush period has expired */
-			uint16_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer);
-			if (!(--FlushPeriodRemaining) || (BufferCount > 200))
-			{
-				FlushPeriodRemaining = RECEIVE_BUFFER_FLUSH_MS;
-
-				/* Start RX LED indicator pulse */
-				if (BufferCount)
-				{
-					LEDs_TurnOnLEDs(LEDMASK_RX);
-					PulseMSRemaining.RxLEDPulse = TX_RX_LED_PULSE_MS;
-				}
-
-				/* Echo bytes from the target to the host via the virtual serial port */
-				while (BufferCount--)
-				{
-					/* Try to send the next byte of data to the host, abort if there is an error without dequeuing */
-					if (CDC_Device_SendByte(&VirtualSerial_CDC_Interface,
-											RingBuffer_Peek(&USARTtoUSB_Buffer)) != ENDPOINT_READYWAIT_NoError)
-					{
-						break;
-					}
-
-					/* Dequeue the already sent byte from the buffer now we have confirmed that no transmission error occurred */
-					RingBuffer_Remove(&USARTtoUSB_Buffer);
-				}
-			}
-		}
-
-		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	USB_Init();
-
-	/* Millisecond Timer Interrupt */
-	OCR0A  = (F_CPU / 64 / 1000);
-	TCCR0A = (1 << WGM01);
-	TCCR0B = ((1 << CS01) | (1 << CS00));
-
-	/* Tristate target /RESET Line */
-	AVR_RESET_LINE_PORT &= ~AVR_RESET_LINE_MASK;
-	AVR_RESET_LINE_DDR  &= ~AVR_RESET_LINE_MASK;
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	PulseMSRemaining.PingPongLEDPulse = PING_PONG_LED_PULSE_MS;
-	LEDs_SetAllLEDs(LEDMASK_TX);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	PulseMSRemaining.PingPongLEDPulse = 0;
-	LEDs_SetAllLEDs(LEDS_NO_LEDS);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
-
-	PulseMSRemaining.PingPongLEDPulse = 0;
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDS_NO_LEDS : LEDMASK_ERROR);
-}
-
-/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
- *  the device from the USB host before passing along unhandled control requests to the library for processing
- *  internally.
- */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
-}
-
-/** Event handler for the CDC Class driver Line Encoding Changed event.
- *
- *  \param[in] CDCInterfaceInfo  Pointer to the CDC class interface configuration structure being referenced
- */
-void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
-{
-	uint8_t ConfigMask = 0;
-
-	switch (CDCInterfaceInfo->State.LineEncoding.ParityType)
-	{
-		case CDC_PARITY_Odd:
-			ConfigMask = ((1 << UPM11) | (1 << UPM10));
-			break;
-		case CDC_PARITY_Even:
-			ConfigMask = (1 << UPM11);
-			break;
-	}
-
-	if (CDCInterfaceInfo->State.LineEncoding.CharFormat == CDC_LINEENCODING_TwoStopBits)
-	  ConfigMask |= (1 << USBS1);
-
-	switch (CDCInterfaceInfo->State.LineEncoding.DataBits)
-	{
-		case 6:
-			ConfigMask |= (1 << UCSZ10);
-			break;
-		case 7:
-			ConfigMask |= (1 << UCSZ11);
-			break;
-		case 8:
-			ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10));
-			break;
-	}
-
-	/* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */
-	UCSR1B = 0;
-	UCSR1A = 0;
-	UCSR1C = 0;
-
-	/* Set the new baud rate before configuring the USART */
-	UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
-
-	/* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */
-	UCSR1C = ConfigMask;
-	UCSR1A = (1 << U2X1);
-	UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
-}
-
-/** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer
- *  for later transmission to the host.
- */
-ISR(USART1_RX_vect, ISR_BLOCK)
-{
-	uint8_t ReceivedByte = UDR1;
-
-	if (USB_DeviceState == DEVICE_STATE_Configured)
-	  RingBuffer_Insert(&USARTtoUSB_Buffer, ReceivedByte);
-}
-
-/** Event handler for the CDC Class driver Host-to-Device Line Encoding Changed event.
- *
- *  \param[in] CDCInterfaceInfo  Pointer to the CDC class interface configuration structure being referenced
- */
-void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
-{
-	static bool PreviousDTRState = false;
-	bool        CurrentDTRState  = (CDCInterfaceInfo->State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR);
-
-	/* Check if the DTR line has been asserted - if so, start the target AVR's reset pulse */
-	if (!(PreviousDTRState) && CurrentDTRState)
-	{
-		LEDs_SetAllLEDs(LEDMASK_BUSY);
-
-		AVR_RESET_LINE_DDR |= AVR_RESET_LINE_MASK;
-		PulseMSRemaining.ResetPulse = AVR_RESET_PULSE_MS;
-	}
-
-	PreviousDTRState = CurrentDTRState;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Benito.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Benito.h
deleted file mode 100644
index b77409bd03..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Benito.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Benito.c.
- */
-
-#ifndef _BENITO_H_
-#define _BENITO_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-
-		#include "Descriptors.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Misc/RingBuffer.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate TX activity. */
-		#define LEDMASK_TX               LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate RX activity. */
-		#define LEDMASK_RX               LEDS_LED2
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_ERROR            (LEDS_LED1 | LEDS_LED2)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_BUSY             (LEDS_LED1 | LEDS_LED2)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-		void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo);
-		void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Benito.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Benito.txt
deleted file mode 100644
index 07bec52b3a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Benito.txt
+++ /dev/null
@@ -1,106 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Benito Arduino Programmer Project
- *
- *  \section Sec_Compat Project Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this project.
- *
- * <table>
- *  <tr>
- *   <td><b>USB Mode:</b></td>
- *   <td>Device</td>
- *  </tr>
- *  <tr>
- *   <td><b>USB Class:</b></td>
- *   <td>Communications Device Class (CDC)</td>
- *  </tr>
- *  <tr>
- *   <td><b>USB Subclass:</b></td>
- *   <td>Abstract Control Model (ACM)</td>
- *  </tr>
- *  <tr>
- *   <td><b>Relevant Standards:</b></td>
- *   <td>USBIF CDC Class Standard \n
- *       Arduino Bootloader Specification</td>
- *  </tr>
- *  <tr>
- *   <td><b>Supported USB Speeds:</b></td>
- *   <td>Full Speed Mode</td>
- *  </tr>
- * </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Firmware for a USB AVR powered programmer for Arduino boards using the official Arduino bootloader. This
- *  project acts like a regular USB to Serial bridge, except that asserting the DTR line will cause a pulse
- *  to appear on a given port pin, to control the target's /RESET pin.
- *
- *  This is primarily designed to fit the Benito board from www.dorkbotpdx.org, but will suit all USB AVRs.
- *
- *  After running this project for the first time on a new computer, you will need to supply the .INF file located
- *  in this project's directory as the device's driver when running under Windows. This will enable Windows to use
- *  its inbuilt CDC drivers, negating the need for custom drivers for the device. Other Operating Systems should
- *  automatically use their own inbuilt CDC-ACM drivers.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>AVR_RESET_LINE_PORT</td>
- *    <td>AppConfig.h</td>
- *    <td>Indicates the PORT register of the pin used to generate the target /RESET line pulse.</td>
- *   </tr>
- *   <tr>
- *    <td>AVR_RESET_LINE_DDR</td>
- *    <td>AppConfig.h</td>
- *    <td>Indicates the DDR register of the pin used to generate the target /RESET line pulse.</td>
- *   </tr>
- *   <tr>
- *    <td>AVR_RESET_LINE_MASK</td>
- *    <td>AppConfig.h</td>
- *    <td>Indicates the mask of the pin used to generate the target /RESET line pulse.</td>
- *   </tr>
- *   <tr>
- *    <td>AVR_RESET_PULSE_MS</td>
- *    <td>AppConfig.h</td>
- *    <td>Pulse length in milliseconds for the target /RESET pulse.</td>
- *   </tr>
- *   <tr>
- *    <td>TX_RX_LED_PULSE_MS</td>
- *    <td>AppConfig.h</td>
- *    <td>Pulse length in milliseconds for the activity Tx/Rx LEDs.</td>
- *   </tr>
- *   <tr>
- *    <td>PING_PONG_LED_PULSE_MS</td>
- *    <td>AppConfig.h</td>
- *    <td>Pulse length in milliseconds for the enumeration LED ping-ponging between toggles.</td>
- *   </tr>
- *   <tr>
- *    <td>RECEIVE_BUFFER_FLUSH_MS</td>
- *    <td>AppConfig.h</td>
- *    <td>Period between flushings of received data buffer to the attached USB host.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Config/AppConfig.h
deleted file mode 100644
index 85bf57938a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Config/AppConfig.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define AVR_RESET_LINE_PORT            PORTD
-	#define AVR_RESET_LINE_DDR             DDRD
-	#define AVR_RESET_LINE_MASK            (1 << 4)
-
-	#define AVR_RESET_PULSE_MS             10
-
-	#define TX_RX_LED_PULSE_MS             30
-	#define PING_PONG_LED_PULSE_MS         100
-
-	#define RECEIVE_BUFFER_FLUSH_MS        10
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Config/LUFAConfig.h
deleted file mode 100644
index 1bf1f19e65..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-		#define DEVICE_STATE_AS_GPIOR            0
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Descriptors.c
deleted file mode 100644
index e21a6ee540..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Descriptors.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = CDC_CSCP_CDCClass,
-	.SubClass               = CDC_CSCP_NoSpecificSubclass,
-	.Protocol               = CDC_CSCP_NoSpecificProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2060,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 2,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.CDC_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x06,
-		},
-
-	.CDC_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
-		},
-
-	.CDC_NotificationEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"Benito Arduino Programmer");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Descriptors.h
deleted file mode 100644
index 95223ee2dc..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/Descriptors.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 2)
-
-		/** Endpoint address of the CDC device-to-host data IN endpoint. */
-		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
-		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPSIZE        8
-
-		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                16
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t    Config;
-
-			// CDC Command Interface
-			USB_Descriptor_Interface_t               CDC_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
-			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
-
-			// CDC Data Interface
-			USB_Descriptor_Interface_t               CDC_DCI_Interface;
-			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
-			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/LUFA Benito Programmer.inf b/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/LUFA Benito Programmer.inf
deleted file mode 100644
index 75e93a8a9a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/LUFA Benito Programmer.inf
+++ /dev/null
@@ -1,66 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-;************************************************************
-
-[DefaultInstall]
-CopyINF="LUFA Benito Programmer.inf"
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-DriverVer=7/1/2012,10.0.0.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
-
-[SourceDisksNames]
-
-[SourceDisksFiles]
-
-[DestinationDirs]
-DefaultDestDir=12
-
-[DriverInstall]
-Include=mdmcpq.inf
-CopyFiles=FakeModemCopyFileSection
-AddReg=DriverInstall.AddReg
-
-[DriverInstall.Services]
-Include=mdmcpq.inf
-AddService=usbser, 0x00000002, LowerFilter_Service_Inst
-
-[DriverInstall.AddReg]
-HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2060
-
-[DeviceList.NTx86]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2060
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2060
-
-[DeviceList.NTia64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2060
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGNAME="http://www.lufa-lib.org"
-DESCRIPTION="LUFA Benito Programmer"
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/asf.xml
deleted file mode 100644
index 6f36da7671..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/asf.xml
+++ /dev/null
@@ -1,53 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Benito Programmer" id="lufa.projects.benito.avr8">

-		<require idref="lufa.projects.benito"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.projects.benito" caption="Benito Programmer">

-		<info type="description" value="summary">

-		Benito AVR programmer.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="CDC Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="Benito.txt"/>

-		<build type="distribute" subtype="user-file" value="LUFA Benito Programmer.inf"/>

-

-		<build type="c-source" value="Benito.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Benito.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ringbuffer"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/doxyfile
deleted file mode 100644
index 487c43c80b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "Benito Arduino Programmer Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/makefile
deleted file mode 100644
index a1fa59e350..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Benito/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = atmega32u2
-ARCH         = AVR8
-BOARD        = BENITO
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = Benito
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/Config/LUFAConfig.h
deleted file mode 100644
index 5d657a214b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/HIDReportViewer.c b/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/HIDReportViewer.c
deleted file mode 100644
index 924fe1dd2b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/HIDReportViewer.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the HIDReportViewer project. This file contains the main tasks of
- *  the project and is responsible for the initial application hardware configuration.
- */
-
-#include "HIDReportViewer.h"
-
-/** Processed HID report descriptor items structure, containing information on each HID report element */
-static HID_ReportInfo_t HIDReportInfo;
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Host_t Device_HID_Interface =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-				.HIDInterfaceProtocol   = HID_CSCP_NonBootProtocol,
-				.HIDParserData          = &HIDReportInfo
-			},
-	};
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "HID Device Report Viewer Running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		RetrieveDeviceData();
-
-		HID_Host_USBTask(&Device_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Task to retrieve the HID device information from an attached device, and output
- *  the relevant data to the serial port for analysis.
- */
-void RetrieveDeviceData(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-	OutputReportSizes();
-	OutputParsedReportItems();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	USB_Host_SetDeviceConfiguration(0);
-}
-
-/** Prints a summary of the device's HID report sizes from the HID parser output to the serial port
- *  for display to the user.
- */
-void OutputReportSizes(void)
-{
-	printf_P(PSTR("\r\n\r\nTotal Device Reports: %" PRId8 "\r\n"), HIDReportInfo.TotalDeviceReports);
-
-	for (uint8_t ReportIndex = 0; ReportIndex < HIDReportInfo.TotalDeviceReports; ReportIndex++)
-	{
-		const HID_ReportSizeInfo_t* CurrReportIDInfo = &HIDReportInfo.ReportIDSizes[ReportIndex];
-
-		uint8_t ReportSizeInBits      = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_In];
-		uint8_t ReportSizeOutBits     = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_Out];
-		uint8_t ReportSizeFeatureBits = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_Feature];
-
-		/* Print out the byte sizes of each report within the device */
-		printf_P(PSTR("  + Report ID 0x%02" PRIX8 "\r\n"
-					  "    - Input Data:   %" PRId8 " bits (%" PRId8 " bytes)\r\n"
-					  "    - Output Data:  %" PRId8 " bits (%" PRId8 " bytes)\r\n"
-					  "    - Feature Data: %" PRId8 " bits (%" PRId8 " bytes)\r\n"),
-				 CurrReportIDInfo->ReportID,
-				 ReportSizeInBits,
-				 ((ReportSizeInBits      >> 3) + ((ReportSizeInBits      & 0x07) != 0)),
-				 ReportSizeOutBits,
-				 ((ReportSizeOutBits     >> 3) + ((ReportSizeOutBits     & 0x07) != 0)),
-				 ReportSizeFeatureBits,
-				 ((ReportSizeFeatureBits >> 3) + ((ReportSizeFeatureBits & 0x07) != 0)));
-	}
-}
-
-/** Prints a summary of the device's parsed and stored report items along with their attributes
- *  to the serial port for display to the user.
- */
-void OutputParsedReportItems(void)
-{
-	printf_P(PSTR("\r\nReport Items (%" PRId8 " in Table):\r\n"), HIDReportInfo.TotalReportItems);
-
-	for (uint8_t ItemIndex = 0; ItemIndex < HIDReportInfo.TotalReportItems; ItemIndex++)
-	{
-		const HID_ReportItem_t* RItem = &HIDReportInfo.ReportItems[ItemIndex];
-
-		printf_P(PSTR("  + Item %" PRId8 ":\r\n"
-					  "    - Report ID:          0x%02" PRIX8  "\r\n"
-					  "    - Data Direction:     %s\r\n"
-					  "    - Item Flags:         0x%02" PRIX8  "\r\n"
-					  "    - Item Offset (Bits): 0x%02" PRIX8  "\r\n"
-					  "    - Item Size (Bits):   0x%02" PRIX8  "\r\n"
-					  "    - Usage Page:         0x%04" PRIX16 "\r\n"
-					  "    - Usage:              0x%04" PRIX16 "\r\n"
-					  "    - Unit Type:          0x%08" PRIX32 "\r\n"
-					  "    - Unit Exponent:      0x%02" PRIX8  "\r\n"
-					  "    - Logical Minimum:    0x%08" PRIX32 "\r\n"
-					  "    - Logical Maximum:    0x%08" PRIX32 "\r\n"
-					  "    - Physical Minimum:   0x%08" PRIX32 "\r\n"
-					  "    - Physical Maximum:   0x%08" PRIX32 "\r\n"
-					  "    - Collection Path:\r\n"),
-				 ItemIndex,
-				 RItem->ReportID,
-				 ((RItem->ItemType == HID_REPORT_ITEM_In) ? "IN" : ((RItem->ItemType == HID_REPORT_ITEM_Out) ? "OUT" : "FEATURE")),
-				 RItem->ItemFlags,
-				 RItem->BitOffset,
-				 RItem->Attributes.BitSize,
-				 RItem->Attributes.Usage.Page,
-				 RItem->Attributes.Usage.Usage,
-				 RItem->Attributes.Unit.Type,
-				 RItem->Attributes.Unit.Exponent,
-				 RItem->Attributes.Logical.Minimum,
-				 RItem->Attributes.Logical.Maximum,
-				 RItem->Attributes.Physical.Minimum,
-				 RItem->Attributes.Physical.Maximum);
-
-		OutputCollectionPath(RItem->CollectionPath);
-	}
-}
-
-/** Prints the HID Collection path (along with each node's attributes) to the serial port
- *  for display to the user, from the given starting node to the root node.
- *
- *  \param[in] CollectionPath  Starting HID Collection node to print
- */
-void OutputCollectionPath(const HID_CollectionPath_t* const CollectionPath)
-{
-	const HID_CollectionPath_t* CurrentNode = CollectionPath;
-
-	while (CurrentNode != NULL)
-	{
-		printf_P(PSTR("      |\r\n"
-					  "      - Type:  0x%02" PRIX8 "\r\n"
-					  "      - Usage: 0x%02" PRIX8 "\r\n"),
-					  CurrentNode->Type, CurrentNode->Usage);
-
-		CurrentNode = CurrentNode->Parent;
-	}
-
-	printf_P(PSTR("      |\r\n"
-				  "      END\r\n"));
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Serial_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-
-	/* Create a stdio stream for the serial port for stdin and stdout */
-	Serial_CreateStream(NULL);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR("Device Attached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR("\r\nDevice Unattached.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (HID_Host_ConfigurePipes(&Device_HID_Interface,
-	                            ConfigDescriptorSize, ConfigDescriptorData) != HID_ENUMERROR_NoError)
-	{
-		puts_P(PSTR("Attached Device Not a Valid HID Device.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (HID_Host_SetReportProtocol(&Device_HID_Interface) != 0)
-	{
-		puts_P(PSTR("Error Setting Report Protocol Mode.\r\n"));
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	puts_P(PSTR("HID Device Enumerated.\r\n"));
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Callback for the HID Report Parser. This function is called each time the HID report parser is about to store
- *  an IN, OUT or FEATURE item into the HIDReportInfo structure. To save on RAM, we are able to filter out items
- *  we aren't interested in (preventing us from being able to extract them later on, but saving on the RAM they would
- *  have occupied).
- *
- *  \param[in] CurrentItem  Pointer to the item the HID report parser is currently working with
- *
- *  \return Boolean \c true if the item should be stored into the HID report structure, \c false if it should be discarded
- */
-bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem)
-{
-	return true;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/HIDReportViewer.h b/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/HIDReportViewer.h
deleted file mode 100644
index 2b4edc39bd..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/HIDReportViewer.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for HIDReportViewer.c.
- */
-
-#ifndef _HID_REPORT_VIEWER_H_
-#define _HID_REPORT_VIEWER_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-		#include <inttypes.h>
-
-		#include <LUFA/Drivers/Misc/TerminalCodes.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY         (LEDS_LED1 | LEDS_LED3 | LEDS_LED4)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void RetrieveDeviceData(void);
-		void OutputReportSizes(void);
-		void OutputParsedReportItems(void);
-		void OutputCollectionPath(const HID_CollectionPath_t* const CollectionPath);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-		bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/HIDReportViewer.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/HIDReportViewer.txt
deleted file mode 100644
index fccc892c6c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/HIDReportViewer.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage HID Device Report Viewer Programmer Project
- *
- *  \section Sec_Compat Project Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this project.
- *
- * <table>
- *  <tr>
- *   <td><b>USB Mode:</b></td>
- *   <td>Host</td>
- *  </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- * </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Firmware for a HID Report viewer. This project is designed to aid in the debugging of USB HID Hosts, where the contents of an
- *  unknown HID device's HID Report need to be examined. Once a HID device has been plugged into this application, the HID report
- *  descriptor will be parsed using the internal LUFA HID report parser, and the results dumped to the serial port in a human
- *  readable format. This output will contain information on the sizes of the reports within the device's HID interface, as well as
- *  information on each report element (size, usage, minimum/maximum values, etc.).
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/asf.xml
deleted file mode 100644
index 7819aabf87..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/asf.xml
+++ /dev/null
@@ -1,48 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="HID Report Viewer" id="lufa.projects.hid_viewer.avr8">

-		<require idref="lufa.projects.hid_viewer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.projects.hid_viewer" caption="HID Report Viewer">

-		<info type="description" value="summary">

-		HID device report viewer project.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Host"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="HIDReportViewer.txt"/>

-

-		<build type="c-source" value="HIDReportViewer.c"/>

-		<build type="header-file" value="HIDReportViewer.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.misc.ansi"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/doxyfile
deleted file mode 100644
index 3a5ac56926..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "HID Device Report Viewer Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/makefile
deleted file mode 100644
index 7336a7edf9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/HIDReportViewer/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = HIDReportViewer
-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/CPUMonitor.Designer.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/CPUMonitor.Designer.cs
deleted file mode 100644
index 2b189943a7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/CPUMonitor.Designer.cs
+++ /dev/null
@@ -1,131 +0,0 @@
-namespace CPUMonitor
-{
-    partial class frmCPU
-    {
-        /// <summary>
-        /// Required designer variable.
-        /// </summary>
-        private System.ComponentModel.IContainer components = null;
-
-        /// <summary>
-        /// Clean up any resources being used.
-        /// </summary>
-        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
-        protected override void Dispose(bool disposing)
-        {
-            if (disposing && (components != null))
-            {
-                components.Dispose();
-            }
-            base.Dispose(disposing);
-        }
-
-        #region Windows Form Designer generated code
-
-        /// <summary>
-        /// Required method for Designer support - do not modify
-        /// the contents of this method with the code editor.
-        /// </summary>
-        private void InitializeComponent()
-        {
-            this.components = new System.ComponentModel.Container();
-            this.serSerialPort = new System.IO.Ports.SerialPort(this.components);
-            this.tmrCPUTimer = new System.Windows.Forms.Timer(this.components);
-            this.cmbComPort = new System.Windows.Forms.ComboBox();
-            this.pcCPUUsage = new System.Diagnostics.PerformanceCounter();
-            this.lblCPU = new System.Windows.Forms.Label();
-            this.nicoNotifyIcon = new System.Windows.Forms.NotifyIcon(this.components);
-            this.btnMinimizeToTray = new System.Windows.Forms.Button();
-            this.btnExit = new System.Windows.Forms.Button();
-            ((System.ComponentModel.ISupportInitialize)(this.pcCPUUsage)).BeginInit();
-            this.SuspendLayout();
-            // 
-            // tmrCPUTimer
-            // 
-            this.tmrCPUTimer.Enabled = true;
-            this.tmrCPUTimer.Interval = 1000;
-            this.tmrCPUTimer.Tick += new System.EventHandler(this.tmrCPUTimer_Tick);
-            // 
-            // cmbComPort
-            // 
-            this.cmbComPort.FormattingEnabled = true;
-            this.cmbComPort.Location = new System.Drawing.Point(48, 12);
-            this.cmbComPort.Name = "cmbComPort";
-            this.cmbComPort.Size = new System.Drawing.Size(156, 21);
-            this.cmbComPort.TabIndex = 0;
-            this.cmbComPort.SelectedIndexChanged += new System.EventHandler(this.cbPort_SelectedIndexChanged);
-            // 
-            // pcCPUUsage
-            // 
-            this.pcCPUUsage.CategoryName = "Processor";
-            this.pcCPUUsage.CounterName = "% Processor Time";
-            this.pcCPUUsage.InstanceName = "_Total";
-            // 
-            // lblCPU
-            // 
-            this.lblCPU.Font = new System.Drawing.Font("Microsoft Sans Serif", 14.25F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
-            this.lblCPU.Location = new System.Drawing.Point(44, 36);
-            this.lblCPU.Name = "lblCPU";
-            this.lblCPU.Size = new System.Drawing.Size(160, 28);
-            this.lblCPU.TabIndex = 1;
-            this.lblCPU.Text = "0%";
-            this.lblCPU.TextAlign = System.Drawing.ContentAlignment.MiddleCenter;
-            // 
-            // nicoNotifyIcon
-            // 
-            this.nicoNotifyIcon.Text = "CPU Usage Monitor";
-            this.nicoNotifyIcon.Visible = true;
-            // 
-            // btnMinimizeToTray
-            // 
-            this.btnMinimizeToTray.Location = new System.Drawing.Point(12, 67);
-            this.btnMinimizeToTray.Name = "btnMinimizeToTray";
-            this.btnMinimizeToTray.Size = new System.Drawing.Size(111, 28);
-            this.btnMinimizeToTray.TabIndex = 2;
-            this.btnMinimizeToTray.Text = "Minimize to Tray";
-            this.btnMinimizeToTray.UseVisualStyleBackColor = true;
-            this.btnMinimizeToTray.Click += new System.EventHandler(this.btnMinimizeToTray_Click);
-            // 
-            // btnExit
-            // 
-            this.btnExit.Location = new System.Drawing.Point(126, 67);
-            this.btnExit.Name = "btnExit";
-            this.btnExit.Size = new System.Drawing.Size(111, 28);
-            this.btnExit.TabIndex = 3;
-            this.btnExit.Text = "Exit";
-            this.btnExit.UseVisualStyleBackColor = true;
-            this.btnExit.Click += new System.EventHandler(this.btnExit_Click);
-            // 
-            // frmCPU
-            // 
-            this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
-            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
-            this.ClientSize = new System.Drawing.Size(249, 106);
-            this.Controls.Add(this.btnExit);
-            this.Controls.Add(this.btnMinimizeToTray);
-            this.Controls.Add(this.lblCPU);
-            this.Controls.Add(this.cmbComPort);
-            this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.FixedSingle;
-            this.MaximizeBox = false;
-            this.Name = "frmCPU";
-            this.Text = "CPU Usage Monitor";
-            this.WindowState = System.Windows.Forms.FormWindowState.Minimized;
-            this.Load += new System.EventHandler(this.Form1_Load);
-            ((System.ComponentModel.ISupportInitialize)(this.pcCPUUsage)).EndInit();
-            this.ResumeLayout(false);
-
-        }
-
-        #endregion
-
-        private System.IO.Ports.SerialPort serSerialPort;
-        private System.Windows.Forms.Timer tmrCPUTimer;
-        private System.Windows.Forms.ComboBox cmbComPort;
-        private System.Diagnostics.PerformanceCounter pcCPUUsage;
-        private System.Windows.Forms.Label lblCPU;
-        private System.Windows.Forms.NotifyIcon nicoNotifyIcon;
-        private System.Windows.Forms.Button btnMinimizeToTray;
-        private System.Windows.Forms.Button btnExit;
-    }
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/CPUMonitor.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/CPUMonitor.cs
deleted file mode 100644
index 32543fc59b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/CPUMonitor.cs
+++ /dev/null
@@ -1,115 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.ComponentModel;
-using System.Data;
-using System.Drawing;
-using System.Linq;
-using System.Text;
-using System.Windows.Forms;
-using Microsoft.Win32;
-
-namespace CPUMonitor
-{
-    public partial class frmCPU : Form
-    {
-        private RegistryKey AppRegKey;
-
-        private const int LIGHT_MAX = 0x1F;
-
-        public frmCPU()
-        {
-            InitializeComponent();
-
-            nicoNotifyIcon.Icon = this.Icon;
-            nicoNotifyIcon.MouseClick += new MouseEventHandler(TrayIconClick);        
-        }
-
-        private void Form1_Load(object sender, EventArgs e)
-        {
-            AppRegKey = Registry.CurrentUser.CreateSubKey("Software\\CPUMonitor");
-
-            String[] PortNames = System.IO.Ports.SerialPort.GetPortNames();
-            Array.Sort<String>(PortNames, delegate(string strA, string strB) { return int.Parse(strA.Substring(3)).CompareTo(int.Parse(strB.Substring(3))); });
-            cmbComPort.Items.Clear();
-            cmbComPort.Items.AddRange(PortNames);
-
-            cmbComPort.SelectedIndex = System.Convert.ToInt32(AppRegKey.GetValue("Port", "1")) - 1;
-            serSerialPort.PortName = cmbComPort.Text;
-
-            Hide();
-        }
-
-        private void NotifyLight(int Red, int Green, int Blue)
-        {
-            byte[] buffer = new byte[3];
-            buffer[0] = (byte)(0x80 | (Red & LIGHT_MAX));
-            buffer[1] = (byte)(0x40 | (Green & LIGHT_MAX));
-            buffer[2] = (byte)(0x20 | (Blue & LIGHT_MAX));
-
-            try
-            {
-                serSerialPort.PortName = cmbComPort.Text;
-                serSerialPort.Open();
-                serSerialPort.Write(buffer, 0, buffer.Length);
-                serSerialPort.Close();
-            }
-            catch (Exception e)
-            {
-
-            }
-        }
-
-        private void tmrCPUTimer_Tick(object sender, EventArgs e)
-        {
-            float CPUUsage = pcCPUUsage.NextValue();
-
-            int Red = 0;
-            int Green = 0;
-            int Blue = 0;
-
-            if (CPUUsage < 25)
-            {
-                Green = (int)((LIGHT_MAX / 25) * CPUUsage);
-            }
-            else if (CPUUsage < 50)
-            {
-                Blue = (int)((LIGHT_MAX / 25) * (CPUUsage - 25));
-                Green = LIGHT_MAX - Blue;
-            }
-            else if (CPUUsage < 75)
-            {
-                Red = (int)((LIGHT_MAX / 25) * (CPUUsage - 50));
-                Blue = LIGHT_MAX - Red;
-            }
-            else
-            {
-                Red = LIGHT_MAX;
-            }
-
-            NotifyLight(Red, Green, Blue);
-            lblCPU.Text = ((int)CPUUsage).ToString() + "%";
-        }
-
-        private void btnExit_Click(object sender, EventArgs e)
-        {
-            Application.Exit();
-        }
-
-        private void btnMinimizeToTray_Click(object sender, EventArgs e)
-        {
-            this.Hide();
-        }
-
-        private void TrayIconClick(object sender, MouseEventArgs e)
-        {
-            this.Show();
-            this.WindowState = FormWindowState.Normal;
-        }
-
-        private void cbPort_SelectedIndexChanged(object sender, EventArgs e)
-        {
-            AppRegKey.SetValue("Port", cmbComPort.SelectedIndex + 1);
-            serSerialPort.PortName = cmbComPort.Text;
-        }
-    }
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/CPUMonitor.csproj b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/CPUMonitor.csproj
deleted file mode 100644
index d568a9dc48..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/CPUMonitor.csproj
+++ /dev/null
@@ -1,95 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <PropertyGroup>
-    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
-    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
-    <ProductVersion>9.0.21022</ProductVersion>
-    <SchemaVersion>2.0</SchemaVersion>
-    <ProjectGuid>{6040B049-4241-4FFD-B388-AACDA78D1469}</ProjectGuid>
-    <OutputType>WinExe</OutputType>
-    <AppDesignerFolder>Properties</AppDesignerFolder>
-    <RootNamespace>CPUMonitor</RootNamespace>
-    <AssemblyName>CPUMonitor</AssemblyName>
-    <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
-    <FileAlignment>512</FileAlignment>
-    <FileUpgradeFlags>
-    </FileUpgradeFlags>
-    <OldToolsVersion>3.5</OldToolsVersion>
-    <UpgradeBackupLocation />
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
-    <DebugSymbols>true</DebugSymbols>
-    <DebugType>full</DebugType>
-    <Optimize>false</Optimize>
-    <OutputPath>bin\Debug\</OutputPath>
-    <DefineConstants>DEBUG;TRACE</DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
-    <DebugType>pdbonly</DebugType>
-    <Optimize>true</Optimize>
-    <OutputPath>bin\Release\</OutputPath>
-    <DefineConstants>TRACE</DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-  </PropertyGroup>
-  <ItemGroup>
-    <Reference Include="System" />
-    <Reference Include="System.Core">
-      <RequiredTargetFramework>3.5</RequiredTargetFramework>
-    </Reference>
-    <Reference Include="System.Xml.Linq">
-      <RequiredTargetFramework>3.5</RequiredTargetFramework>
-    </Reference>
-    <Reference Include="System.Data.DataSetExtensions">
-      <RequiredTargetFramework>3.5</RequiredTargetFramework>
-    </Reference>
-    <Reference Include="System.Data" />
-    <Reference Include="System.Deployment" />
-    <Reference Include="System.Drawing" />
-    <Reference Include="System.Windows.Forms" />
-    <Reference Include="System.Xml" />
-  </ItemGroup>
-  <ItemGroup>
-    <Compile Include="CPUMonitor.cs">
-      <SubType>Form</SubType>
-    </Compile>
-    <Compile Include="CPUMonitor.Designer.cs">
-      <DependentUpon>CPUMonitor.cs</DependentUpon>
-    </Compile>
-    <Compile Include="Program.cs" />
-    <Compile Include="Properties\AssemblyInfo.cs" />
-    <EmbeddedResource Include="CPUMonitor.resx">
-      <DependentUpon>CPUMonitor.cs</DependentUpon>
-      <SubType>Designer</SubType>
-    </EmbeddedResource>
-    <EmbeddedResource Include="Properties\Resources.resx">
-      <Generator>ResXFileCodeGenerator</Generator>
-      <LastGenOutput>Resources.Designer.cs</LastGenOutput>
-      <SubType>Designer</SubType>
-    </EmbeddedResource>
-    <Compile Include="Properties\Resources.Designer.cs">
-      <AutoGen>True</AutoGen>
-      <DependentUpon>Resources.resx</DependentUpon>
-      <DesignTime>True</DesignTime>
-    </Compile>
-    <None Include="Properties\Settings.settings">
-      <Generator>SettingsSingleFileGenerator</Generator>
-      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
-    </None>
-    <Compile Include="Properties\Settings.Designer.cs">
-      <AutoGen>True</AutoGen>
-      <DependentUpon>Settings.settings</DependentUpon>
-      <DesignTimeSharedInput>True</DesignTimeSharedInput>
-    </Compile>
-  </ItemGroup>
-  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
-  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
-       Other similar extension points exist, see Microsoft.Common.targets.
-  <Target Name="BeforeBuild">
-  </Target>
-  <Target Name="AfterBuild">
-  </Target>
-  -->
-</Project>
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/CPUMonitor.resx b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/CPUMonitor.resx
deleted file mode 100644
index c62b1b0203..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/CPUMonitor.resx
+++ /dev/null
@@ -1,132 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<root>
-  <!-- 
-    Microsoft ResX Schema 
-    
-    Version 2.0
-    
-    The primary goals of this format is to allow a simple XML format 
-    that is mostly human readable. The generation and parsing of the 
-    various data types are done through the TypeConverter classes 
-    associated with the data types.
-    
-    Example:
-    
-    ... ado.net/XML headers & schema ...
-    <resheader name="resmimetype">text/microsoft-resx</resheader>
-    <resheader name="version">2.0</resheader>
-    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
-    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
-    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
-    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
-    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
-        <value>[base64 mime encoded serialized .NET Framework object]</value>
-    </data>
-    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
-        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
-        <comment>This is a comment</comment>
-    </data>
-                
-    There are any number of "resheader" rows that contain simple 
-    name/value pairs.
-    
-    Each data row contains a name, and value. The row also contains a 
-    type or mimetype. Type corresponds to a .NET class that support 
-    text/value conversion through the TypeConverter architecture. 
-    Classes that don't support this are serialized and stored with the 
-    mimetype set.
-    
-    The mimetype is used for serialized objects, and tells the 
-    ResXResourceReader how to depersist the object. This is currently not 
-    extensible. For a given mimetype the value must be set accordingly:
-    
-    Note - application/x-microsoft.net.object.binary.base64 is the format 
-    that the ResXResourceWriter will generate, however the reader can 
-    read any of the formats listed below.
-    
-    mimetype: application/x-microsoft.net.object.binary.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
-            : and then encoded with base64 encoding.
-    
-    mimetype: application/x-microsoft.net.object.soap.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
-            : and then encoded with base64 encoding.
-
-    mimetype: application/x-microsoft.net.object.bytearray.base64
-    value   : The object must be serialized into a byte array 
-            : using a System.ComponentModel.TypeConverter
-            : and then encoded with base64 encoding.
-    -->
-  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
-    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
-    <xsd:element name="root" msdata:IsDataSet="true">
-      <xsd:complexType>
-        <xsd:choice maxOccurs="unbounded">
-          <xsd:element name="metadata">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" />
-              </xsd:sequence>
-              <xsd:attribute name="name" use="required" type="xsd:string" />
-              <xsd:attribute name="type" type="xsd:string" />
-              <xsd:attribute name="mimetype" type="xsd:string" />
-              <xsd:attribute ref="xml:space" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="assembly">
-            <xsd:complexType>
-              <xsd:attribute name="alias" type="xsd:string" />
-              <xsd:attribute name="name" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="data">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
-              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
-              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
-              <xsd:attribute ref="xml:space" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="resheader">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" />
-            </xsd:complexType>
-          </xsd:element>
-        </xsd:choice>
-      </xsd:complexType>
-    </xsd:element>
-  </xsd:schema>
-  <resheader name="resmimetype">
-    <value>text/microsoft-resx</value>
-  </resheader>
-  <resheader name="version">
-    <value>2.0</value>
-  </resheader>
-  <resheader name="reader">
-    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-  <resheader name="writer">
-    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-  <metadata name="serSerialPort.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
-    <value>17, 17</value>
-  </metadata>
-  <metadata name="tmrCPUTimer.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
-    <value>137, 17</value>
-  </metadata>
-  <metadata name="pcCPUUsage.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
-    <value>262, 17</value>
-  </metadata>
-  <metadata name="nicoNotifyIcon.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
-    <value>383, 17</value>
-  </metadata>
-</root>
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Program.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Program.cs
deleted file mode 100644
index cb4fd89f23..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Program.cs
+++ /dev/null
@@ -1,21 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Windows.Forms;
-
-namespace CPUMonitor
-{
-    static class Program
-    {
-        /// <summary>
-        /// The main entry point for the application.
-        /// </summary>
-        [STAThread]
-        static void Main()
-        {
-            Application.EnableVisualStyles();
-            Application.SetCompatibleTextRenderingDefault(false);
-            Application.Run(new frmCPU());
-        }
-    }
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/AssemblyInfo.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/AssemblyInfo.cs
deleted file mode 100644
index 85d31fcba7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/AssemblyInfo.cs
+++ /dev/null
@@ -1,36 +0,0 @@
-using System.Reflection;
-using System.Runtime.CompilerServices;
-using System.Runtime.InteropServices;
-
-// General Information about an assembly is controlled through the following 
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-[assembly: AssemblyTitle("CPUMonitor")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("Microsoft")]
-[assembly: AssemblyProduct("CPUMonitor")]
-[assembly: AssemblyCopyright("Copyright © Microsoft 2009")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
-// Setting ComVisible to false makes the types in this assembly not visible 
-// to COM components.  If you need to access a type in this assembly from 
-// COM, set the ComVisible attribute to true on that type.
-[assembly: ComVisible(false)]
-
-// The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("3e4a61da-cdde-46de-848b-b5206d225e21")]
-
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version 
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Build and Revision Numbers 
-// by using the '*' as shown below:
-// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.0")]
-[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/Resources.Designer.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/Resources.Designer.cs
deleted file mode 100644
index bf80e05fc5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/Resources.Designer.cs
+++ /dev/null
@@ -1,63 +0,0 @@
-//------------------------------------------------------------------------------
-// <auto-generated>
-//     This code was generated by a tool.
-//     Runtime Version:4.0.30319.239
-//
-//     Changes to this file may cause incorrect behavior and will be lost if
-//     the code is regenerated.
-// </auto-generated>
-//------------------------------------------------------------------------------
-
-namespace CPUMonitor.Properties {
-    using System;
-    
-    
-    /// <summary>
-    ///   A strongly-typed resource class, for looking up localized strings, etc.
-    /// </summary>
-    // This class was auto-generated by the StronglyTypedResourceBuilder
-    // class via a tool like ResGen or Visual Studio.
-    // To add or remove a member, edit your .ResX file then rerun ResGen
-    // with the /str option, or rebuild your VS project.
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")]
-    [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
-    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    internal class Resources {
-        
-        private static global::System.Resources.ResourceManager resourceMan;
-        
-        private static global::System.Globalization.CultureInfo resourceCulture;
-        
-        [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
-        internal Resources() {
-        }
-        
-        /// <summary>
-        ///   Returns the cached ResourceManager instance used by this class.
-        /// </summary>
-        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
-        internal static global::System.Resources.ResourceManager ResourceManager {
-            get {
-                if (object.ReferenceEquals(resourceMan, null)) {
-                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("CPUMonitor.Properties.Resources", typeof(Resources).Assembly);
-                    resourceMan = temp;
-                }
-                return resourceMan;
-            }
-        }
-        
-        /// <summary>
-        ///   Overrides the current thread's CurrentUICulture property for all
-        ///   resource lookups using this strongly typed resource class.
-        /// </summary>
-        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
-        internal static global::System.Globalization.CultureInfo Culture {
-            get {
-                return resourceCulture;
-            }
-            set {
-                resourceCulture = value;
-            }
-        }
-    }
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/Resources.resx b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/Resources.resx
deleted file mode 100644
index af7dbebbac..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/Resources.resx
+++ /dev/null
@@ -1,117 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<root>
-  <!-- 
-    Microsoft ResX Schema 
-    
-    Version 2.0
-    
-    The primary goals of this format is to allow a simple XML format 
-    that is mostly human readable. The generation and parsing of the 
-    various data types are done through the TypeConverter classes 
-    associated with the data types.
-    
-    Example:
-    
-    ... ado.net/XML headers & schema ...
-    <resheader name="resmimetype">text/microsoft-resx</resheader>
-    <resheader name="version">2.0</resheader>
-    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
-    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
-    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
-    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
-    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
-        <value>[base64 mime encoded serialized .NET Framework object]</value>
-    </data>
-    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
-        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
-        <comment>This is a comment</comment>
-    </data>
-                
-    There are any number of "resheader" rows that contain simple 
-    name/value pairs.
-    
-    Each data row contains a name, and value. The row also contains a 
-    type or mimetype. Type corresponds to a .NET class that support 
-    text/value conversion through the TypeConverter architecture. 
-    Classes that don't support this are serialized and stored with the 
-    mimetype set.
-    
-    The mimetype is used for serialized objects, and tells the 
-    ResXResourceReader how to depersist the object. This is currently not 
-    extensible. For a given mimetype the value must be set accordingly:
-    
-    Note - application/x-microsoft.net.object.binary.base64 is the format 
-    that the ResXResourceWriter will generate, however the reader can 
-    read any of the formats listed below.
-    
-    mimetype: application/x-microsoft.net.object.binary.base64
-    value   : The object must be serialized with 
-            : System.Serialization.Formatters.Binary.BinaryFormatter
-            : and then encoded with base64 encoding.
-    
-    mimetype: application/x-microsoft.net.object.soap.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
-            : and then encoded with base64 encoding.
-
-    mimetype: application/x-microsoft.net.object.bytearray.base64
-    value   : The object must be serialized into a byte array 
-            : using a System.ComponentModel.TypeConverter
-            : and then encoded with base64 encoding.
-    -->
-  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
-    <xsd:element name="root" msdata:IsDataSet="true">
-      <xsd:complexType>
-        <xsd:choice maxOccurs="unbounded">
-          <xsd:element name="metadata">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" />
-              <xsd:attribute name="type" type="xsd:string" />
-              <xsd:attribute name="mimetype" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="assembly">
-            <xsd:complexType>
-              <xsd:attribute name="alias" type="xsd:string" />
-              <xsd:attribute name="name" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="data">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
-              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
-              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="resheader">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" />
-            </xsd:complexType>
-          </xsd:element>
-        </xsd:choice>
-      </xsd:complexType>
-    </xsd:element>
-  </xsd:schema>
-  <resheader name="resmimetype">
-    <value>text/microsoft-resx</value>
-  </resheader>
-  <resheader name="version">
-    <value>2.0</value>
-  </resheader>
-  <resheader name="reader">
-    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-  <resheader name="writer">
-    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-</root>
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/Settings.Designer.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/Settings.Designer.cs
deleted file mode 100644
index 690fde3ba2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/Settings.Designer.cs
+++ /dev/null
@@ -1,26 +0,0 @@
-//------------------------------------------------------------------------------
-// <auto-generated>
-//     This code was generated by a tool.
-//     Runtime Version:4.0.30319.239
-//
-//     Changes to this file may cause incorrect behavior and will be lost if
-//     the code is regenerated.
-// </auto-generated>
-//------------------------------------------------------------------------------
-
-namespace CPUMonitor.Properties {
-    
-    
-    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "10.0.0.0")]
-    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
-        
-        private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
-        
-        public static Settings Default {
-            get {
-                return defaultInstance;
-            }
-        }
-    }
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/Settings.settings b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/Settings.settings
deleted file mode 100644
index 39645652af..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/CPUUsageApp/Properties/Settings.settings
+++ /dev/null
@@ -1,7 +0,0 @@
-<?xml version='1.0' encoding='utf-8'?>
-<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)">
-  <Profiles>
-    <Profile Name="(Default)" />
-  </Profiles>
-  <Settings />
-</SettingsFile>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/Config/LUFAConfig.h
deleted file mode 100644
index 078f7e6753..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-		#define DEVICE_STATE_AS_GPIOR            0
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/Descriptors.c
deleted file mode 100644
index aed252fe91..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/Descriptors.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = CDC_CSCP_CDCClass,
-	.SubClass               = CDC_CSCP_NoSpecificSubclass,
-	.Protocol               = CDC_CSCP_NoSpecificProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2044,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 2,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.CDC_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x06,
-		},
-
-	.CDC_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
-		},
-
-	.CDC_NotificationEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LED Notifier");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/Descriptors.h
deleted file mode 100644
index ce014c632a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/Descriptors.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Macros: */
-		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 2)
-
-		/** Endpoint address of the CDC device-to-host data IN endpoint. */
-		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
-		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPSIZE        8
-
-		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                16
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t    Config;
-
-			// CDC Command Interface
-			USB_Descriptor_Interface_t               CDC_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
-			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
-
-			// CDC Data Interface
-			USB_Descriptor_Interface_t               CDC_DCI_Interface;
-			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
-			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/LEDMixer.Designer.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/LEDMixer.Designer.cs
deleted file mode 100644
index 595083a4a8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/LEDMixer.Designer.cs
+++ /dev/null
@@ -1,149 +0,0 @@
-namespace LEDMixer
-{
-    partial class LEDMixer
-    {
-        /// <summary>
-        /// Required designer variable.
-        /// </summary>
-        private System.ComponentModel.IContainer components = null;
-
-        /// <summary>
-        /// Clean up any resources being used.
-        /// </summary>
-        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
-        protected override void Dispose(bool disposing)
-        {
-            if (disposing && (components != null))
-            {
-                components.Dispose();
-            }
-            base.Dispose(disposing);
-        }
-
-        #region Windows Form Designer generated code
-
-        /// <summary>
-        /// Required method for Designer support - do not modify
-        /// the contents of this method with the code editor.
-        /// </summary>
-        private void InitializeComponent()
-        {
-            this.components = new System.ComponentModel.Container();
-            this.tbRed = new System.Windows.Forms.TrackBar();
-            this.tbGreen = new System.Windows.Forms.TrackBar();
-            this.tbBlue = new System.Windows.Forms.TrackBar();
-            this.serSerialPort = new System.IO.Ports.SerialPort(this.components);
-            this.cbPort = new System.Windows.Forms.ComboBox();
-            this.lblRed = new System.Windows.Forms.Label();
-            this.lblBlue = new System.Windows.Forms.Label();
-            this.lblGreen = new System.Windows.Forms.Label();
-            ((System.ComponentModel.ISupportInitialize)(this.tbRed)).BeginInit();
-            ((System.ComponentModel.ISupportInitialize)(this.tbGreen)).BeginInit();
-            ((System.ComponentModel.ISupportInitialize)(this.tbBlue)).BeginInit();
-            this.SuspendLayout();
-            // 
-            // tbRed
-            // 
-            this.tbRed.Location = new System.Drawing.Point(54, 64);
-            this.tbRed.Maximum = 512;
-            this.tbRed.Name = "tbRed";
-            this.tbRed.Size = new System.Drawing.Size(230, 45);
-            this.tbRed.TabIndex = 0;
-            this.tbRed.Scroll += new System.EventHandler(this.tbRed_Scroll);
-            // 
-            // tbGreen
-            // 
-            this.tbGreen.Location = new System.Drawing.Point(54, 115);
-            this.tbGreen.Maximum = 512;
-            this.tbGreen.Name = "tbGreen";
-            this.tbGreen.Size = new System.Drawing.Size(230, 45);
-            this.tbGreen.TabIndex = 1;
-            this.tbGreen.Scroll += new System.EventHandler(this.tbGreen_Scroll);
-            // 
-            // tbBlue
-            // 
-            this.tbBlue.Location = new System.Drawing.Point(54, 163);
-            this.tbBlue.Maximum = 512;
-            this.tbBlue.Name = "tbBlue";
-            this.tbBlue.Size = new System.Drawing.Size(230, 45);
-            this.tbBlue.TabIndex = 2;
-            this.tbBlue.Scroll += new System.EventHandler(this.tbBlue_Scroll);
-            // 
-            // cbPort
-            // 
-            this.cbPort.FormattingEnabled = true;
-            this.cbPort.Location = new System.Drawing.Point(97, 12);
-            this.cbPort.Name = "cbPort";
-            this.cbPort.Size = new System.Drawing.Size(99, 21);
-            this.cbPort.TabIndex = 3;
-            this.cbPort.SelectedIndexChanged += new System.EventHandler(this.cbPort_SelectedIndexChanged);
-            // 
-            // lblRed
-            // 
-            this.lblRed.Font = new System.Drawing.Font("Microsoft Sans Serif", 9.75F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
-            this.lblRed.Location = new System.Drawing.Point(3, 64);
-            this.lblRed.Name = "lblRed";
-            this.lblRed.Size = new System.Drawing.Size(48, 29);
-            this.lblRed.TabIndex = 4;
-            this.lblRed.Text = "Red";
-            this.lblRed.TextAlign = System.Drawing.ContentAlignment.MiddleRight;
-            // 
-            // lblBlue
-            // 
-            this.lblBlue.Font = new System.Drawing.Font("Microsoft Sans Serif", 9.75F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
-            this.lblBlue.Location = new System.Drawing.Point(3, 115);
-            this.lblBlue.Name = "lblGreen";
-            this.lblBlue.Size = new System.Drawing.Size(50, 27);
-            this.lblBlue.TabIndex = 5;
-            this.lblBlue.Text = "Green";
-            this.lblBlue.TextAlign = System.Drawing.ContentAlignment.MiddleRight;
-            // 
-            // lblGreen
-            // 
-            this.lblGreen.Font = new System.Drawing.Font("Microsoft Sans Serif", 9.75F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
-            this.lblGreen.Location = new System.Drawing.Point(3, 163);
-            this.lblGreen.Name = "lblBlue";
-            this.lblGreen.Size = new System.Drawing.Size(50, 25);
-            this.lblGreen.TabIndex = 6;
-            this.lblGreen.Text = "Blue";
-            this.lblGreen.TextAlign = System.Drawing.ContentAlignment.MiddleRight;
-            // 
-            // LEDMixer
-            // 
-            this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
-            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
-            this.ClientSize = new System.Drawing.Size(284, 207);
-            this.Controls.Add(this.lblGreen);
-            this.Controls.Add(this.lblBlue);
-            this.Controls.Add(this.lblRed);
-            this.Controls.Add(this.cbPort);
-            this.Controls.Add(this.tbBlue);
-            this.Controls.Add(this.tbGreen);
-            this.Controls.Add(this.tbRed);
-            this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.FixedSingle;
-            this.MaximizeBox = false;
-            this.MinimizeBox = false;
-            this.Name = "LEDMixer";
-            this.Text = "LED Mixer";
-            this.Load += new System.EventHandler(this.LEDMixer_Load);
-            ((System.ComponentModel.ISupportInitialize)(this.tbRed)).EndInit();
-            ((System.ComponentModel.ISupportInitialize)(this.tbGreen)).EndInit();
-            ((System.ComponentModel.ISupportInitialize)(this.tbBlue)).EndInit();
-            this.ResumeLayout(false);
-            this.PerformLayout();
-
-        }
-
-        #endregion
-
-        private System.Windows.Forms.TrackBar tbRed;
-        private System.Windows.Forms.TrackBar tbGreen;
-        private System.Windows.Forms.TrackBar tbBlue;
-        private System.IO.Ports.SerialPort serSerialPort;
-        private System.Windows.Forms.ComboBox cbPort;
-        private System.Windows.Forms.Label lblRed;
-        private System.Windows.Forms.Label lblBlue;
-        private System.Windows.Forms.Label lblGreen;
-    }
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/LEDMixer.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/LEDMixer.cs
deleted file mode 100644
index dfaffed309..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/LEDMixer.cs
+++ /dev/null
@@ -1,75 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.ComponentModel;
-using System.Data;
-using System.Drawing;
-using System.Linq;
-using System.Text;
-using System.Windows.Forms;
-
-namespace LEDMixer
-{
-    public partial class LEDMixer : Form
-    {
-        private const int LIGHT_MAX = 0x1F;
-        
-        public LEDMixer()
-        {
-            InitializeComponent();
-        }
-
-        private void LEDMixer_Load(object sender, EventArgs e)
-        {
-            String[] PortNames = System.IO.Ports.SerialPort.GetPortNames();
-            Array.Sort<String>(PortNames, delegate(string strA, string strB) { return int.Parse(strA.Substring(3)).CompareTo(int.Parse(strB.Substring(3))); });
-            cbPort.Items.Clear();
-            cbPort.Items.AddRange(PortNames);
-
-            cbPort.SelectedIndex = 0;
-
-            tbRed.Maximum = LIGHT_MAX;
-            tbGreen.Maximum = LIGHT_MAX;
-            tbBlue.Maximum = LIGHT_MAX;
-        }
-
-        private void tbRed_Scroll(object sender, EventArgs e)
-        {
-            NotifyLight(tbRed.Value, tbGreen.Value, tbBlue.Value);
-        }
-
-        private void tbGreen_Scroll(object sender, EventArgs e)
-        {
-            NotifyLight(tbRed.Value, tbGreen.Value, tbBlue.Value);
-        }
-
-        private void tbBlue_Scroll(object sender, EventArgs e)
-        {
-            NotifyLight(tbRed.Value, tbGreen.Value, tbBlue.Value);
-        }
-        
-        private void NotifyLight(int Red, int Green, int Blue)
-        {
-            byte[] buffer = new byte[3];
-            buffer[0] = (byte)(0x80 | (Red & LIGHT_MAX));
-            buffer[1] = (byte)(0x40 | (Green & LIGHT_MAX));
-            buffer[2] = (byte)(0x20 | (Blue & LIGHT_MAX));
-
-            try
-            {
-                serSerialPort.PortName = cbPort.Text;
-                serSerialPort.Open();
-                serSerialPort.Write(buffer, 0, buffer.Length);
-                serSerialPort.Close();
-            }
-            catch (Exception e)
-            {
-
-            }
-        }
-
-        private void cbPort_SelectedIndexChanged(object sender, EventArgs e)
-        {
-            NotifyLight(tbRed.Value, tbGreen.Value, tbBlue.Value);
-        }
-    }
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/LEDMixer.csproj b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/LEDMixer.csproj
deleted file mode 100644
index 6287ddcff1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/LEDMixer.csproj
+++ /dev/null
@@ -1,95 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <PropertyGroup>
-    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
-    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
-    <ProductVersion>9.0.21022</ProductVersion>
-    <SchemaVersion>2.0</SchemaVersion>
-    <ProjectGuid>{A7814DA7-FA30-4A3D-878F-2E1975F9B27D}</ProjectGuid>
-    <OutputType>WinExe</OutputType>
-    <AppDesignerFolder>Properties</AppDesignerFolder>
-    <RootNamespace>LEDMixer</RootNamespace>
-    <AssemblyName>LEDMixer</AssemblyName>
-    <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
-    <FileAlignment>512</FileAlignment>
-    <FileUpgradeFlags>
-    </FileUpgradeFlags>
-    <OldToolsVersion>3.5</OldToolsVersion>
-    <UpgradeBackupLocation />
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
-    <DebugSymbols>true</DebugSymbols>
-    <DebugType>full</DebugType>
-    <Optimize>false</Optimize>
-    <OutputPath>bin\Debug\</OutputPath>
-    <DefineConstants>DEBUG;TRACE</DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
-    <DebugType>pdbonly</DebugType>
-    <Optimize>true</Optimize>
-    <OutputPath>bin\Release\</OutputPath>
-    <DefineConstants>TRACE</DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-  </PropertyGroup>
-  <ItemGroup>
-    <Reference Include="System" />
-    <Reference Include="System.Core">
-      <RequiredTargetFramework>3.5</RequiredTargetFramework>
-    </Reference>
-    <Reference Include="System.Xml.Linq">
-      <RequiredTargetFramework>3.5</RequiredTargetFramework>
-    </Reference>
-    <Reference Include="System.Data.DataSetExtensions">
-      <RequiredTargetFramework>3.5</RequiredTargetFramework>
-    </Reference>
-    <Reference Include="System.Data" />
-    <Reference Include="System.Deployment" />
-    <Reference Include="System.Drawing" />
-    <Reference Include="System.Windows.Forms" />
-    <Reference Include="System.Xml" />
-  </ItemGroup>
-  <ItemGroup>
-    <Compile Include="LEDMixer.cs">
-      <SubType>Form</SubType>
-    </Compile>
-    <Compile Include="LEDMixer.Designer.cs">
-      <DependentUpon>LEDMixer.cs</DependentUpon>
-    </Compile>
-    <Compile Include="Program.cs" />
-    <Compile Include="Properties\AssemblyInfo.cs" />
-    <EmbeddedResource Include="LEDMixer.resx">
-      <DependentUpon>LEDMixer.cs</DependentUpon>
-      <SubType>Designer</SubType>
-    </EmbeddedResource>
-    <EmbeddedResource Include="Properties\Resources.resx">
-      <Generator>ResXFileCodeGenerator</Generator>
-      <LastGenOutput>Resources.Designer.cs</LastGenOutput>
-      <SubType>Designer</SubType>
-    </EmbeddedResource>
-    <Compile Include="Properties\Resources.Designer.cs">
-      <AutoGen>True</AutoGen>
-      <DependentUpon>Resources.resx</DependentUpon>
-      <DesignTime>True</DesignTime>
-    </Compile>
-    <None Include="Properties\Settings.settings">
-      <Generator>SettingsSingleFileGenerator</Generator>
-      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
-    </None>
-    <Compile Include="Properties\Settings.Designer.cs">
-      <AutoGen>True</AutoGen>
-      <DependentUpon>Settings.settings</DependentUpon>
-      <DesignTimeSharedInput>True</DesignTimeSharedInput>
-    </Compile>
-  </ItemGroup>
-  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
-  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
-       Other similar extension points exist, see Microsoft.Common.targets.
-  <Target Name="BeforeBuild">
-  </Target>
-  <Target Name="AfterBuild">
-  </Target>
-  -->
-</Project>
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/LEDMixer.resx b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/LEDMixer.resx
deleted file mode 100644
index 0601840d7b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/LEDMixer.resx
+++ /dev/null
@@ -1,123 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<root>
-  <!-- 
-    Microsoft ResX Schema 
-    
-    Version 2.0
-    
-    The primary goals of this format is to allow a simple XML format 
-    that is mostly human readable. The generation and parsing of the 
-    various data types are done through the TypeConverter classes 
-    associated with the data types.
-    
-    Example:
-    
-    ... ado.net/XML headers & schema ...
-    <resheader name="resmimetype">text/microsoft-resx</resheader>
-    <resheader name="version">2.0</resheader>
-    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
-    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
-    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
-    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
-    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
-        <value>[base64 mime encoded serialized .NET Framework object]</value>
-    </data>
-    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
-        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
-        <comment>This is a comment</comment>
-    </data>
-                
-    There are any number of "resheader" rows that contain simple 
-    name/value pairs.
-    
-    Each data row contains a name, and value. The row also contains a 
-    type or mimetype. Type corresponds to a .NET class that support 
-    text/value conversion through the TypeConverter architecture. 
-    Classes that don't support this are serialized and stored with the 
-    mimetype set.
-    
-    The mimetype is used for serialized objects, and tells the 
-    ResXResourceReader how to depersist the object. This is currently not 
-    extensible. For a given mimetype the value must be set accordingly:
-    
-    Note - application/x-microsoft.net.object.binary.base64 is the format 
-    that the ResXResourceWriter will generate, however the reader can 
-    read any of the formats listed below.
-    
-    mimetype: application/x-microsoft.net.object.binary.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
-            : and then encoded with base64 encoding.
-    
-    mimetype: application/x-microsoft.net.object.soap.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
-            : and then encoded with base64 encoding.
-
-    mimetype: application/x-microsoft.net.object.bytearray.base64
-    value   : The object must be serialized into a byte array 
-            : using a System.ComponentModel.TypeConverter
-            : and then encoded with base64 encoding.
-    -->
-  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
-    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
-    <xsd:element name="root" msdata:IsDataSet="true">
-      <xsd:complexType>
-        <xsd:choice maxOccurs="unbounded">
-          <xsd:element name="metadata">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" />
-              </xsd:sequence>
-              <xsd:attribute name="name" use="required" type="xsd:string" />
-              <xsd:attribute name="type" type="xsd:string" />
-              <xsd:attribute name="mimetype" type="xsd:string" />
-              <xsd:attribute ref="xml:space" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="assembly">
-            <xsd:complexType>
-              <xsd:attribute name="alias" type="xsd:string" />
-              <xsd:attribute name="name" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="data">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
-              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
-              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
-              <xsd:attribute ref="xml:space" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="resheader">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" />
-            </xsd:complexType>
-          </xsd:element>
-        </xsd:choice>
-      </xsd:complexType>
-    </xsd:element>
-  </xsd:schema>
-  <resheader name="resmimetype">
-    <value>text/microsoft-resx</value>
-  </resheader>
-  <resheader name="version">
-    <value>2.0</value>
-  </resheader>
-  <resheader name="reader">
-    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-  <resheader name="writer">
-    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-  <metadata name="serSerialPort.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
-    <value>17, 17</value>
-  </metadata>
-</root>
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Program.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Program.cs
deleted file mode 100644
index 8958f86d2a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Program.cs
+++ /dev/null
@@ -1,21 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Windows.Forms;
-
-namespace LEDMixer
-{
-    static class Program
-    {
-        /// <summary>
-        /// The main entry point for the application.
-        /// </summary>
-        [STAThread]
-        static void Main()
-        {
-            Application.EnableVisualStyles();
-            Application.SetCompatibleTextRenderingDefault(false);
-            Application.Run(new LEDMixer());
-        }
-    }
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/AssemblyInfo.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/AssemblyInfo.cs
deleted file mode 100644
index c88194381e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/AssemblyInfo.cs
+++ /dev/null
@@ -1,36 +0,0 @@
-using System.Reflection;
-using System.Runtime.CompilerServices;
-using System.Runtime.InteropServices;
-
-// General Information about an assembly is controlled through the following 
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-[assembly: AssemblyTitle("LEDMixer")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("Microsoft")]
-[assembly: AssemblyProduct("LEDMixer")]
-[assembly: AssemblyCopyright("Copyright © Microsoft 2009")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
-// Setting ComVisible to false makes the types in this assembly not visible 
-// to COM components.  If you need to access a type in this assembly from 
-// COM, set the ComVisible attribute to true on that type.
-[assembly: ComVisible(false)]
-
-// The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("335c1112-9aa6-42a0-9765-5cc6deb78c88")]
-
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version 
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Build and Revision Numbers 
-// by using the '*' as shown below:
-// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.0")]
-[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/Resources.Designer.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/Resources.Designer.cs
deleted file mode 100644
index 53e3f2e0b9..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/Resources.Designer.cs
+++ /dev/null
@@ -1,63 +0,0 @@
-//------------------------------------------------------------------------------
-// <auto-generated>
-//     This code was generated by a tool.
-//     Runtime Version:4.0.30319.239
-//
-//     Changes to this file may cause incorrect behavior and will be lost if
-//     the code is regenerated.
-// </auto-generated>
-//------------------------------------------------------------------------------
-
-namespace LEDMixer.Properties {
-    using System;
-    
-    
-    /// <summary>
-    ///   A strongly-typed resource class, for looking up localized strings, etc.
-    /// </summary>
-    // This class was auto-generated by the StronglyTypedResourceBuilder
-    // class via a tool like ResGen or Visual Studio.
-    // To add or remove a member, edit your .ResX file then rerun ResGen
-    // with the /str option, or rebuild your VS project.
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")]
-    [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
-    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    internal class Resources {
-        
-        private static global::System.Resources.ResourceManager resourceMan;
-        
-        private static global::System.Globalization.CultureInfo resourceCulture;
-        
-        [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
-        internal Resources() {
-        }
-        
-        /// <summary>
-        ///   Returns the cached ResourceManager instance used by this class.
-        /// </summary>
-        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
-        internal static global::System.Resources.ResourceManager ResourceManager {
-            get {
-                if (object.ReferenceEquals(resourceMan, null)) {
-                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("LEDMixer.Properties.Resources", typeof(Resources).Assembly);
-                    resourceMan = temp;
-                }
-                return resourceMan;
-            }
-        }
-        
-        /// <summary>
-        ///   Overrides the current thread's CurrentUICulture property for all
-        ///   resource lookups using this strongly typed resource class.
-        /// </summary>
-        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
-        internal static global::System.Globalization.CultureInfo Culture {
-            get {
-                return resourceCulture;
-            }
-            set {
-                resourceCulture = value;
-            }
-        }
-    }
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/Resources.resx b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/Resources.resx
deleted file mode 100644
index af7dbebbac..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/Resources.resx
+++ /dev/null
@@ -1,117 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<root>
-  <!-- 
-    Microsoft ResX Schema 
-    
-    Version 2.0
-    
-    The primary goals of this format is to allow a simple XML format 
-    that is mostly human readable. The generation and parsing of the 
-    various data types are done through the TypeConverter classes 
-    associated with the data types.
-    
-    Example:
-    
-    ... ado.net/XML headers & schema ...
-    <resheader name="resmimetype">text/microsoft-resx</resheader>
-    <resheader name="version">2.0</resheader>
-    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
-    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
-    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
-    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
-    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
-        <value>[base64 mime encoded serialized .NET Framework object]</value>
-    </data>
-    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
-        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
-        <comment>This is a comment</comment>
-    </data>
-                
-    There are any number of "resheader" rows that contain simple 
-    name/value pairs.
-    
-    Each data row contains a name, and value. The row also contains a 
-    type or mimetype. Type corresponds to a .NET class that support 
-    text/value conversion through the TypeConverter architecture. 
-    Classes that don't support this are serialized and stored with the 
-    mimetype set.
-    
-    The mimetype is used for serialized objects, and tells the 
-    ResXResourceReader how to depersist the object. This is currently not 
-    extensible. For a given mimetype the value must be set accordingly:
-    
-    Note - application/x-microsoft.net.object.binary.base64 is the format 
-    that the ResXResourceWriter will generate, however the reader can 
-    read any of the formats listed below.
-    
-    mimetype: application/x-microsoft.net.object.binary.base64
-    value   : The object must be serialized with 
-            : System.Serialization.Formatters.Binary.BinaryFormatter
-            : and then encoded with base64 encoding.
-    
-    mimetype: application/x-microsoft.net.object.soap.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
-            : and then encoded with base64 encoding.
-
-    mimetype: application/x-microsoft.net.object.bytearray.base64
-    value   : The object must be serialized into a byte array 
-            : using a System.ComponentModel.TypeConverter
-            : and then encoded with base64 encoding.
-    -->
-  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
-    <xsd:element name="root" msdata:IsDataSet="true">
-      <xsd:complexType>
-        <xsd:choice maxOccurs="unbounded">
-          <xsd:element name="metadata">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" />
-              <xsd:attribute name="type" type="xsd:string" />
-              <xsd:attribute name="mimetype" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="assembly">
-            <xsd:complexType>
-              <xsd:attribute name="alias" type="xsd:string" />
-              <xsd:attribute name="name" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="data">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
-              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
-              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="resheader">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" />
-            </xsd:complexType>
-          </xsd:element>
-        </xsd:choice>
-      </xsd:complexType>
-    </xsd:element>
-  </xsd:schema>
-  <resheader name="resmimetype">
-    <value>text/microsoft-resx</value>
-  </resheader>
-  <resheader name="version">
-    <value>2.0</value>
-  </resheader>
-  <resheader name="reader">
-    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-  <resheader name="writer">
-    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-</root>
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/Settings.Designer.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/Settings.Designer.cs
deleted file mode 100644
index d79f28b804..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/Settings.Designer.cs
+++ /dev/null
@@ -1,26 +0,0 @@
-//------------------------------------------------------------------------------
-// <auto-generated>
-//     This code was generated by a tool.
-//     Runtime Version:4.0.30319.239
-//
-//     Changes to this file may cause incorrect behavior and will be lost if
-//     the code is regenerated.
-// </auto-generated>
-//------------------------------------------------------------------------------
-
-namespace LEDMixer.Properties {
-    
-    
-    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "10.0.0.0")]
-    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
-        
-        private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
-        
-        public static Settings Default {
-            get {
-                return defaultInstance;
-            }
-        }
-    }
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/Settings.settings b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/Settings.settings
deleted file mode 100644
index 39645652af..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDMixerApp/Properties/Settings.settings
+++ /dev/null
@@ -1,7 +0,0 @@
-<?xml version='1.0' encoding='utf-8'?>
-<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)">
-  <Profiles>
-    <Profile Name="(Default)" />
-  </Profiles>
-  <Settings />
-</SettingsFile>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDNotifier.c b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDNotifier.c
deleted file mode 100644
index 07455764df..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDNotifier.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the LEDNotfier project. This file contains the main tasks of
- *  the project and is responsible for the initial application hardware configuration.
- */
-
-#include "LEDNotifier.h"
-
-/** LUFA CDC Class driver interface configuration and state information. This structure is
- *  passed to all CDC Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
-	{
-		.Config =
-			{
-				.ControlInterfaceNumber   = INTERFACE_ID_CDC_CCI,
-				.DataINEndpoint           =
-					{
-						.Address          = CDC_TX_EPADDR,
-						.Size             = CDC_TXRX_EPSIZE,
-						.Banks            = 1,
-					},
-				.DataOUTEndpoint =
-					{
-						.Address          = CDC_RX_EPADDR,
-						.Size             = CDC_TXRX_EPSIZE,
-						.Banks            = 1,
-					},
-				.NotificationEndpoint =
-					{
-						.Address          = CDC_NOTIFICATION_EPADDR,
-						.Size             = CDC_NOTIFICATION_EPSIZE,
-						.Banks            = 1,
-					},
-			},
-	};
-
-/** Counter for the software PWM. */
-static volatile uint8_t SoftPWM_Count;
-
-/** Duty cycle for the first software PWM channel. */
-static volatile uint8_t SoftPWM_Channel1_Duty;
-
-/** Duty cycle for the second software PWM channel. */
-static volatile uint8_t SoftPWM_Channel2_Duty;
-
-/** Duty cycle for the third software PWM channel. */
-static volatile uint8_t SoftPWM_Channel3_Duty;
-
-/** Standard file stream for the CDC interface when set up, so that the virtual CDC COM port can be
- *  used like any regular character stream in the C APIs.
- */
-static FILE USBSerialStream;
-
-
-/** Interrupt handler for managing the software PWM channels for the LEDs */
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)
-{
-	uint8_t LEDMask = LEDS_ALL_LEDS;
-
-	if (++SoftPWM_Count == 0b00011111)
-	  SoftPWM_Count = 0;
-
-	if (SoftPWM_Count >= SoftPWM_Channel1_Duty)
-	  LEDMask &= ~LEDS_LED1;
-
-	if (SoftPWM_Count >= SoftPWM_Channel2_Duty)
-	  LEDMask &= ~LEDS_LED2;
-
-	if (SoftPWM_Count >= SoftPWM_Channel3_Duty)
-	  LEDMask &= ~LEDS_LED3;
-
-	LEDs_SetAllLEDs(LEDMask);
-}
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	/* Create a regular blocking character stream for the interface so that it can be used with the stdio.h functions */
-	CDC_Device_CreateBlockingStream(&VirtualSerial_CDC_Interface, &USBSerialStream);
-
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		/* Read in next LED colour command from the host */
-		uint8_t ColourUpdate = fgetc(&USBSerialStream);
-
-		/* Top 3 bits select the LED, bottom 5 control the brightness */
-		uint8_t Channel = (ColourUpdate & 0b11100000);
-		uint8_t Duty    = (ColourUpdate & 0b00011111);
-
-		if (Channel & (1 << 5))
-		  SoftPWM_Channel1_Duty = Duty;
-
-		if (Channel & (1 << 6))
-		  SoftPWM_Channel2_Duty = Duty;
-
-		if (Channel & (1 << 7))
-		  SoftPWM_Channel3_Duty = Duty;
-
-		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	USB_Init();
-
-	/* Timer Initialization */
-	OCR0A  = 100;
-	TCCR0A = (1 << WGM01);
-	TCCR0B = (1 << CS00);
-	TIMSK0 = (1 << OCIE0A);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDNotifier.h b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDNotifier.h
deleted file mode 100644
index 7a0a9ae46b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDNotifier.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for LEDNotifier.c.
- */
-
-#ifndef _LEDNOTIFIER_H_
-#define _LEDNOTIFIER_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <string.h>
-		#include <stdio.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDNotifier.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDNotifier.txt
deleted file mode 100644
index 53728f448f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LEDNotifier.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage USB LED Notifier Project
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li AT90USB646
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  USB LED Notifier Project. This project is designed for the Busware BUI board, however it can run easily on any
- *  USB AVR. It is a generic RGB LED controller (via a three channel software PWM) which listens for commands from the
- *  host on a CDC virtual serial port. When new commands are received, it updates the board LEDs.
- *
- *  This can be controlled with any host application that can write to the virtual serial port, allowing it to become
- *  a visual notification system for any number of custom host applications, such as a new unread email notifier.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LUFA LED Notifier.inf b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LUFA LED Notifier.inf
deleted file mode 100644
index dc3f0e74aa..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/LUFA LED Notifier.inf
+++ /dev/null
@@ -1,66 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-;************************************************************
-
-[DefaultInstall]
-CopyINF="LUFA LED Notifier.inf"
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-DriverVer=7/1/2012,10.0.0.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
-
-[SourceDisksNames]
-
-[SourceDisksFiles]
-
-[DestinationDirs]
-DefaultDestDir=12
-
-[DriverInstall]
-Include=mdmcpq.inf
-CopyFiles=FakeModemCopyFileSection
-AddReg=DriverInstall.AddReg
-
-[DriverInstall.Services]
-Include=mdmcpq.inf
-AddService=usbser, 0x00000002, LowerFilter_Service_Inst
-
-[DriverInstall.AddReg]
-HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
-
-[DeviceList.NTx86]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
-
-[DeviceList.NTia64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGNAME="http://www.lufa-lib.org"
-DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/asf.xml
deleted file mode 100644
index 01f3468381..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/asf.xml
+++ /dev/null
@@ -1,51 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="LED Notifier Widget" id="lufa.projects.led_notifier.avr8">

-		<require idref="lufa.projects.led_notifier"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.projects.led_notifier" caption="LED Notifier Widget">

-		<info type="description" value="summary">

-		RGB LED notification widget project.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="CDC Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="LEDNotifier.txt"/>

-		<build type="distribute" subtype="user-file" value="LUFA LED Notifier.inf"/>

-		<build type="distribute" subtype="directory" value="CPUUsageApp"/>

-		<build type="distribute" subtype="directory" value="LEDMixerApp"/>

-

-		<build type="c-source" value="LEDNotifier.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="LEDNotifier.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/doxyfile
deleted file mode 100644
index 1a1e500f43..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/doxyfile
+++ /dev/null
@@ -1,2366 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - USB LED Notifier Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/ \
-                         CPUUsageApp/ \
-                         LEDMixerApp/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/makefile
deleted file mode 100644
index c4e0334785..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/LEDNotifier/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = BUI
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = LEDNotifier
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/Config/AppConfig.h
deleted file mode 100644
index 2e249cf1fa..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/Config/AppConfig.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define MAX_SIMULTANEOUS_NOTES     3
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/Config/LUFAConfig.h
deleted file mode 100644
index 078f7e6753..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-		#define DEVICE_STATE_AS_GPIOR            0
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/Descriptors.c
deleted file mode 100644
index f7138ca59c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/Descriptors.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2048,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize   = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces          = 2,
-
-			.ConfigurationNumber      = 1,
-			.ConfigurationStrIndex    = NO_DESCRIPTOR,
-
-			.ConfigAttributes         = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption      = USB_CONFIG_POWER_MA(100)
-		},
-
-	.Audio_ControlInterface =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioControl,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 0,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_ControlSubclass,
-			.Protocol                 = AUDIO_CSCP_ControlProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_ControlInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_Header,
-
-			.ACSpecification          = VERSION_BCD(1,0,0),
-			.TotalLength              = sizeof(USB_Audio_Descriptor_Interface_AC_t),
-
-			.InCollection             = 1,
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-		},
-
-	.Audio_StreamInterface =
-		{
-			.Header                   = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber          = INTERFACE_ID_AudioStream,
-			.AlternateSetting         = 0,
-
-			.TotalEndpoints           = 2,
-
-			.Class                    = AUDIO_CSCP_AudioClass,
-			.SubClass                 = AUDIO_CSCP_MIDIStreamingSubclass,
-			.Protocol                 = AUDIO_CSCP_StreamingProtocol,
-
-			.InterfaceStrIndex        = NO_DESCRIPTOR
-		},
-
-	.Audio_StreamInterface_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_AudioInterface_AS_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_General,
-
-			.AudioSpecification       = VERSION_BCD(1,0,0),
-
-			.TotalLength              = (sizeof(USB_Descriptor_Configuration_t) -
-			                             offsetof(USB_Descriptor_Configuration_t, Audio_StreamInterface_SPC))
-		},
-
-	.MIDI_In_Jack_Emb =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_Embedded,
-			.JackID                   = 0x01,
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_In_Jack_Ext =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_InputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_External,
-			.JackID                   = 0x02,
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_Out_Jack_Emb =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_Embedded,
-			.JackID                   = 0x03,
-
-			.NumberOfPins             = 1,
-			.SourceJackID             = {0x02},
-			.SourcePinID              = {0x01},
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_Out_Jack_Ext =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface},
-			.Subtype                  = AUDIO_DSUBTYPE_CSInterface_OutputTerminal,
-
-			.JackType                 = MIDI_JACKTYPE_External,
-			.JackID                   = 0x04,
-
-			.NumberOfPins             = 1,
-			.SourceJackID             = {0x01},
-			.SourcePinID              = {0x01},
-
-			.JackStrIndex             = NO_DESCRIPTOR
-		},
-
-	.MIDI_In_Jack_Endpoint =
-		{
-			.Endpoint =
-				{
-					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
-
-					.EndpointAddress     = MIDI_STREAM_OUT_EPADDR,
-					.Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-					.EndpointSize        = MIDI_STREAM_EPSIZE,
-					.PollingIntervalMS   = 0x05
-				},
-
-			.Refresh                  = 0,
-			.SyncEndpointNumber       = 0
-		},
-
-	.MIDI_In_Jack_Endpoint_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint},
-			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
-
-			.TotalEmbeddedJacks       = 0x01,
-			.AssociatedJackID         = {0x01}
-		},
-
-	.MIDI_Out_Jack_Endpoint =
-		{
-			.Endpoint =
-				{
-					.Header              = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint},
-
-					.EndpointAddress     = MIDI_STREAM_IN_EPADDR,
-					.Attributes          = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-					.EndpointSize        = MIDI_STREAM_EPSIZE,
-					.PollingIntervalMS   = 0x05
-				},
-
-			.Refresh                  = 0,
-			.SyncEndpointNumber       = 0
-		},
-
-	.MIDI_Out_Jack_Endpoint_SPC =
-		{
-			.Header                   = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint},
-			.Subtype                  = AUDIO_DSUBTYPE_CSEndpoint_General,
-
-			.TotalEmbeddedJacks       = 0x01,
-			.AssociatedJackID         = {0x03}
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA MIDI Demo");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/Descriptors.h
deleted file mode 100644
index 9a0d6414e0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/Descriptors.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <avr/pgmspace.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */
-		#define MIDI_STREAM_IN_EPADDR       (ENDPOINT_DIR_IN  | 2)
-
-		/** Endpoint address of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */
-		#define MIDI_STREAM_OUT_EPADDR      (ENDPOINT_DIR_OUT | 1)
-
-		/** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */
-		#define MIDI_STREAM_EPSIZE          64
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t     Config;
-
-			// MIDI Audio Control Interface
-			USB_Descriptor_Interface_t                Audio_ControlInterface;
-			USB_Audio_Descriptor_Interface_AC_t       Audio_ControlInterface_SPC;
-
-			// MIDI Audio Streaming Interface
-			USB_Descriptor_Interface_t                Audio_StreamInterface;
-			USB_MIDI_Descriptor_AudioInterface_AS_t   Audio_StreamInterface_SPC;
-			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Emb;
-			USB_MIDI_Descriptor_InputJack_t           MIDI_In_Jack_Ext;
-			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Emb;
-			USB_MIDI_Descriptor_OutputJack_t          MIDI_Out_Jack_Ext;
-			USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_In_Jack_Endpoint;
-			USB_MIDI_Descriptor_Jack_Endpoint_t       MIDI_In_Jack_Endpoint_SPC;
-			USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_Out_Jack_Endpoint;
-			USB_MIDI_Descriptor_Jack_Endpoint_t       MIDI_Out_Jack_Endpoint_SPC;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_AudioControl = 0, /**< Audio control interface descriptor ID */
-			INTERFACE_ID_AudioStream  = 1, /**< Audio stream interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/MIDIToneGenerator.c b/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/MIDIToneGenerator.c
deleted file mode 100644
index dd4529adc0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/MIDIToneGenerator.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MIDI demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "MIDIToneGenerator.h"
-
-/** LUFA MIDI Class driver interface configuration and state information. This structure is
- *  passed to all MIDI Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_MIDI_Device_t Keyboard_MIDI_Interface =
-	{
-		.Config =
-			{
-				.StreamingInterfaceNumber = INTERFACE_ID_AudioStream,
-				.DataINEndpoint           =
-					{
-						.Address          = MIDI_STREAM_IN_EPADDR,
-						.Size             = MIDI_STREAM_EPSIZE,
-						.Banks            = 1,
-					},
-				.DataOUTEndpoint           =
-					{
-						.Address          = MIDI_STREAM_OUT_EPADDR,
-						.Size             = MIDI_STREAM_EPSIZE,
-						.Banks            = 1,
-					},
-			},
-	};
-
-/** 8-bit 256 entry Sine Wave lookup table */
-static const uint8_t SineTable[256] =
-{
-	128, 131, 134, 137, 140, 143, 146, 149, 152, 156, 159, 162, 165, 168, 171, 174,
-	176, 179, 182, 185, 188, 191, 193, 196, 199, 201, 204, 206, 209, 211, 213, 216,
-	218, 220, 222, 224, 226, 228, 230, 232, 234, 236, 237, 239, 240, 242, 243, 245,
-	246, 247, 248, 249, 250, 251, 252, 252, 253, 254, 254, 255, 255, 255, 255, 255,
-	255, 255, 255, 255, 255, 255, 254, 254, 253, 252, 252, 251, 250, 249, 248, 247,
-	246, 245, 243, 242, 240, 239, 237, 236, 234, 232, 230, 228, 226, 224, 222, 220,
-	218, 216, 213, 211, 209, 206, 204, 201, 199, 196, 193, 191, 188, 185, 182, 179,
-	176, 174, 171, 168, 165, 162, 159, 156, 152, 149, 146, 143, 140, 137, 134, 131,
-	128, 124, 121, 118, 115, 112, 109, 106, 103,  99,  96,  93,  90,  87,  84,  81,
-	 79,  76,  73,  70,  67,  64,  62,  59,  56,  54,  51,  49,  46,  44,  42,  39,
-	 37,  35,  33,  31,  29,  27,  25,  23,  21,  19,  18,  16,  15,  13,  12,  10,
-	  9,   8,   7,   6,   5,   4,   3,   3,   2,   1,   1,   0,   0,   0,   0,   0,
-	  0,   0,   0,   0,   0,   0,   1,   1,   2,   3,   3,   4,   5,   6,   7,   8,
-	  9,  10,  12,  13,  15,  16,  18,  19,  21,  23,  25,  27,  29,  31,  33,  35,
-	 37,  39,  42,  44,  46,  49,  51,  54,  56,  59,  62,  64,  67,  70,  73,  76,
-	 79,  81,  84,  87,  90,  93,  96,  99, 103, 106, 109, 112, 115, 118, 121, 124,
-};
-
-/** Array of structures describing each note being generated */
-static DDSNoteData NoteData[MAX_SIMULTANEOUS_NOTES];
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		MIDI_EventPacket_t ReceivedMIDIEvent;
-		if (MIDI_Device_ReceiveEventPacket(&Keyboard_MIDI_Interface, &ReceivedMIDIEvent))
-		{
-			if ((ReceivedMIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)) && ((ReceivedMIDIEvent.Data1 & 0x0F) == 0))
-			{
-				DDSNoteData* LRUNoteStruct = &NoteData[0];
-
-				/* Find a free entry in the note table to use for the note being turned on */
-				for (uint8_t i = 0; i < MAX_SIMULTANEOUS_NOTES; i++)
-				{
-					/* Check if the note is unused */
-					if (!(NoteData[i].Pitch))
-					{
-						/* If a note is unused, it's age is essentially infinite - always prefer unused note entries */
-						LRUNoteStruct = &NoteData[i];
-						break;
-					}
-					else if (NoteData[i].LRUAge >= LRUNoteStruct->LRUAge)
-					{
-						/* If an older entry that the current entry has been found, prefer overwriting that one */
-						LRUNoteStruct = &NoteData[i];
-					}
-
-					NoteData[i].LRUAge++;
-				}
-
-				/* Update the oldest note entry with the new note data and reset its age */
-				LRUNoteStruct->Pitch          = ReceivedMIDIEvent.Data2;
-				LRUNoteStruct->TableIncrement = (uint32_t)(BASE_INCREMENT * SCALE_FACTOR) +
-						                         ((uint32_t)(BASE_INCREMENT * NOTE_OCTIVE_RATIO * SCALE_FACTOR) *
-						                          (ReceivedMIDIEvent.Data2 - BASE_PITCH_INDEX));
-				LRUNoteStruct->TablePosition  = 0;
-				LRUNoteStruct->LRUAge         = 0;
-
-				/* Turn on indicator LED to indicate note generation activity */
-				LEDs_SetAllLEDs(LEDS_LED1);
-			}
-			else if ((ReceivedMIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_OFF)) && ((ReceivedMIDIEvent.Data1 & 0x0F) == 0))
-			{
-				bool FoundActiveNote = false;
-
-				/* Find the note in the note table to turn off */
-				for (uint8_t i = 0; i < MAX_SIMULTANEOUS_NOTES; i++)
-				{
-					if (NoteData[i].Pitch == ReceivedMIDIEvent.Data2)
-					  NoteData[i].Pitch = 0;
-					else if (NoteData[i].Pitch)
-					  FoundActiveNote   = true;
-				}
-
-				/* If all notes off, turn off the indicator LED */
-				if (!(FoundActiveNote))
-				  LEDs_SetAllLEDs(LEDS_NO_LEDS);
-			}
-		}
-
-		MIDI_Device_USBTask(&Keyboard_MIDI_Interface);
-		USB_USBTask();
-	}
-}
-
-/** ISR to handle the reloading of the PWM timer with the next sample. */
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)
-{
-	uint16_t MixedSample = 0;
-
-	/* Sum together all the active notes to form a single sample */
-	for (uint8_t i = 0; i < MAX_SIMULTANEOUS_NOTES; i++)
-	{
-		/* A non-zero pitch indicates the note is active */
-		if (NoteData[i].Pitch)
-		{
-			/* Use the top 8 bits of the table position as the sample table index */
-			uint8_t TableIndex = (NoteData[i].TablePosition >> 24);
-
-			/* Add the new tone sample to the accumulator and increment the table position */
-			MixedSample += SineTable[TableIndex];
-			NoteData[i].TablePosition += NoteData[i].TableIncrement;
-		}
-	}
-
-	/* Output clamped mixed sample value to the PWM */
-	OCR3A = (MixedSample <= 0xFF) ? MixedSample : 0xFF;
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	USB_Init();
-
-	/* Sample reload timer initialization */
-	TIMSK0  = (1 << OCIE0A);
-	OCR0A   = (VIRTUAL_SAMPLE_TABLE_SIZE / 8);
-	TCCR0A  = (1 << WGM01);  // CTC mode
-	TCCR0B  = (1 << CS01);   // Fcpu/8 speed
-
-	/* Set speaker as output */
-	DDRC |= (1 << 6);
-
-	/* PWM speaker timer initialization */
-	TCCR3A  = ((1 << WGM31) | (1 << COM3A1) | (1 << COM3A0)); // Set on match, clear on TOP
-	TCCR3B  = ((1 << WGM32) | (1 << CS30));  // Fast 8-Bit PWM, Fcpu speed
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	/* Set speaker as output */
-	DDRC |= (1 << 6);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-
-	/* Disable any notes currently being played */
-	for (uint8_t i = 0; i < MAX_SIMULTANEOUS_NOTES; i++)
-	  NoteData[i].Pitch = 0;
-
-	/* Set speaker as input to reduce current draw */
-	DDRC &= ~(1 << 6);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= MIDI_Device_ConfigureEndpoints(&Keyboard_MIDI_Interface);
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	MIDI_Device_ProcessControlRequest(&Keyboard_MIDI_Interface);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/MIDIToneGenerator.h b/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/MIDIToneGenerator.h
deleted file mode 100644
index b0661c3f85..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/MIDIToneGenerator.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for AudioOutput.c.
- */
-
-#ifndef _AUDIO_OUTPUT_H_
-#define _AUDIO_OUTPUT_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/pgmspace.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-
-		#include "Descriptors.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** Scale factor used to convert the floating point frequencies and ratios into a fixed point number */
-		#define SCALE_FACTOR               65536
-
-		/** Base (lowest) allowable MIDI note frequency */
-		#define BASE_FREQUENCY             27.5
-
-		/** Ratio between each note in an octave */
-		#define NOTE_OCTIVE_RATIO          1.05946
-
-		/** Lowest valid MIDI pitch index */
-		#define BASE_PITCH_INDEX           21
-
-		/** Number of samples in the virtual sample table (can be expanded to lower maximum frequency, but allow for
-		 *  more simultaneous notes due to the reduced amount of processing time needed when the samples are spaced out)
-		 */
-		#define VIRTUAL_SAMPLE_TABLE_SIZE  512
-
-		/** Sample table increments per period for the base MIDI note frequency */
-		#define BASE_INCREMENT             (((F_CPU / VIRTUAL_SAMPLE_TABLE_SIZE / 2) / BASE_FREQUENCY))
-
-	/* Type Defines: */
-		typedef struct
-		{
-			uint8_t  LRUAge;
-			uint8_t  Pitch;
-			uint32_t TableIncrement;
-			uint32_t TablePosition;
-		} DDSNoteData;
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_UnhandledControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/MIDIToneGenerator.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/MIDIToneGenerator.txt
deleted file mode 100644
index 7d0f019ee5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/MIDIToneGenerator.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage MIDI Tone Generator Project
- *
- *  \section Sec_Compat Project Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this project.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Standard Audio Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Audio Class Specification \n
- *        USB-MIDI Audio Class Extension Specification \n
- *        General MIDI Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  MIDI note synthesiser project. This project implements a basic DDS frequency synthesiser, capable of producing 8-bit PWM sine
- *  waves of variable frequency. When attached to a USB host, this project will allow for multiple MIDI notes to be synthesised into
- *  audiable sound via PWM, using the notes sent to MIDI channel 1.
- *
- *  Outgoing audio will output in 8-bit PWM onto the timer 3 output compare channel A. Decouple the audio output with a capacitor
- *  and attach to a speaker to hear the audio.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>MAX_SIMULTANEOUS_NOTES</td>
- *    <td>AppConfig.h</td>
- *    <td>Sets the maximum number of MIDI notes that can be generated simultaneously. More notes require more processing time,
- *        and thus a value that is too high will cause audiable sound distortion due to insufficient CPU time.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/asf.xml
deleted file mode 100644
index 6795c1bb8e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/asf.xml
+++ /dev/null
@@ -1,50 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="MIDI Tone Generator" id="lufa.projects.midi_tone_gen.avr8">

-		<require idref="lufa.projects.midi_tone_gen"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.projects.midi_tone_gen" caption="MIDI Tone Generator">

-		<info type="description" value="summary">

-		MIDI tone generator project.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="MIDI Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MIDIToneGenerator.txt"/>

-

-		<build type="c-source" value="MIDIToneGenerator.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="MIDIToneGenerator.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/doxyfile
deleted file mode 100644
index 3c623c8153..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - MIDI Tone Generator Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/makefile
deleted file mode 100644
index 77d771b711..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MIDIToneGenerator/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MIDIToneGenerator
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Config/AppConfig.h
deleted file mode 100644
index da41133238..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Config/AppConfig.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define MAG_T1_CLOCK         (1 << 0)
-	#define MAG_T1_DATA          (1 << 1)
-	#define MAG_T2_CLOCK         (1 << 2)
-	#define MAG_T2_DATA          (1 << 3)
-	#define MAG_T3_CLOCK         (1 << 4)
-	#define MAG_T3_DATA          (1 << 5)
-	#define MAG_CARDPRESENT      (1 << 6)
-
-	#define MAG_PORT             PORTC
-	#define MAG_PIN              PINC
-	#define MAG_DDR              DDRC
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Config/LUFAConfig.h
deleted file mode 100644
index a7decf5a07..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-		#define DEVICE_STATE_AS_GPIOR            0
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Descriptors.c
deleted file mode 100644
index 1c6e9f043e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Descriptors.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID report descriptor. This is a HID class specific descriptor, which defines the structure of the
- *  reports sent and received by the HID device to and from the USB host. It indicates what data is sent,
- *  where in the report each element is located and exactly how the data should be interpreted and used.
- *
- *  See the HID class specification for more information on HID report descriptors.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
-{
-	/* Use the HID class driver's standard Keyboard report.
-	 *   Max simultaneous keys: 6
-	 */
-	HID_DESCRIPTOR_KEYBOARD(6)
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2042,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.HID_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_Keyboard,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_BootSubclass,
-			.Protocol               = HID_CSCP_KeyboardBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_KeyboardHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(KeyboardReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = KEYBOARD_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = KEYBOARD_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors. */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera and Denver Gingerich");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"Magnetic Card Reader");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_KeyboardHID;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case HID_DTYPE_Report:
-			Address = &KeyboardReport;
-			Size    = sizeof(KeyboardReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Descriptors.h
deleted file mode 100644
index 54436fc18a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Descriptors.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config; /**< Configuration descriptor header structure */
-
-			// Keyboard HID Interface
-			USB_Descriptor_Interface_t            HID_Interface; /**< Keyboard interface descriptor */
-			USB_HID_Descriptor_HID_t              HID_KeyboardHID; /**< Keyboard HID descriptor */
-			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint; /**< Keyboard key report endpoint descriptor */
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_Keyboard = 0, /**< Keyboard interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Macros: */
-		/** Endpoint address of the keyboard key press reporting endpoint. */
-		#define KEYBOARD_EPADDR              (ENDPOINT_DIR_IN | 1)
-
-		/** Size of the keyboard report endpoints, in bytes. */
-		#define KEYBOARD_EPSIZE              8
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Lib/CircularBitBuffer.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Lib/CircularBitBuffer.c
deleted file mode 100644
index fbd511b813..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Lib/CircularBitBuffer.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** Circular bit buffer library. This will allow for individual bits
- *  to be stored in packed form inside circular buffers, to reduce
- *  overall RAM usage.
- */
-
-#include "CircularBitBuffer.h"
-
-/** Function to initialize or reset a bit buffer, ready for data to be stored into it. */
-void BitBuffer_Init(BitBuffer_t* const Buffer)
-{
-	/* Reset the number of stored bits in the buffer */
-	Buffer->Elements        = 0;
-
-	/* Reset the data in and out pointer structures in the buffer to the first buffer bit */
-	Buffer->In.CurrentByte  = Buffer->Data;
-	Buffer->In.ByteMask     = (1 << 0);
-	Buffer->Out.CurrentByte = Buffer->Data;
-	Buffer->Out.ByteMask    = (1 << 0);
-}
-
-/** Function to store the given bit into the given bit buffer. */
-void BitBuffer_StoreNextBit(BitBuffer_t* const Buffer,
-                            const bool Bit)
-{
-	/* If the bit to store is true, set the next bit in the buffer */
-	if (Bit)
-	  *Buffer->In.CurrentByte |= Buffer->In.ByteMask;
-
-	/* Increment the number of stored bits in the buffer counter */
-	Buffer->Elements++;
-
-	/* Check if the current buffer byte is full of stored bits */
-	if (Buffer->In.ByteMask == (1 << 7))
-	{
-		/* Check if the end of the buffer has been reached, if so reset to start of buffer, otherwise advance to next bit */
-		if (Buffer->In.CurrentByte != &Buffer->Data[sizeof(Buffer->Data) - 1])
-		  Buffer->In.CurrentByte++;
-		else
-		  Buffer->In.CurrentByte = Buffer->Data;
-
-		/* Reset the storage bit mask in the current buffer byte to the first bit */
-		Buffer->In.ByteMask = (1 << 0);
-	}
-	else
-	{
-		/* Shift the current storage bit mask to the next bit in the current byte */
-		Buffer->In.ByteMask <<= 1;
-	}
-}
-
-/** Function to retrieve the next bit stored in the given bit buffer. */
-bool BitBuffer_GetNextBit(BitBuffer_t* const Buffer)
-{
-	/* Retrieve the value of the next bit stored in the buffer */
-	bool Bit = ((*Buffer->Out.CurrentByte & Buffer->Out.ByteMask) != 0);
-
-	/* Clear the buffer bit */
-	*Buffer->Out.CurrentByte &= ~Buffer->Out.ByteMask;
-
-	/* Decrement the number of stored bits in the buffer counter */
-	Buffer->Elements--;
-
-	/* Check if the current buffer byte is empty of stored bits */
-	if (Buffer->Out.ByteMask == (1 << 7))
-	{
-		/* Check if the end of the buffer has been reached, if so reset to start of buffer, otherwise advance to next bit */
-		if (Buffer->Out.CurrentByte != &Buffer->Data[sizeof(Buffer->Data) - 1])
-		  Buffer->Out.CurrentByte++;
-		else
-		  Buffer->Out.CurrentByte = Buffer->Data;
-
-		/* Reset the retrieval bit mask in the current buffer byte to the first bit */
-		Buffer->Out.ByteMask = (1 << 0);
-	}
-	else
-	{
-		/* Shift the current retrieval bit mask to the next bit in the current byte */
-		Buffer->Out.ByteMask <<= 1;
-	}
-
-	/* Return the retrieved bit from the buffer */
-	return Bit;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Lib/CircularBitBuffer.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Lib/CircularBitBuffer.h
deleted file mode 100644
index 918c825337..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Lib/CircularBitBuffer.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for CircularBitBuffer.c.
- */
-
-#ifndef _CIRCULARBITBUFFER_H_
-#define _CIRCULARBITBUFFER_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <stdbool.h>
-
-		#include <LUFA/Common/Common.h>
-
-	/* Macros: */
-		#if (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) || \
-		     defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__)) || defined(__DOXYGEN__)
-			/** Maximum number of bits which can be stored into a bit buffer. The memory usage is one eighth of this value per buffer. */
-			#define MAX_BITS 8192
-		#else
-			#define MAX_BITS 1024
-		#endif
-
-	/* Type Defines: */
-		/** Type define for a pointer to a bit in a bit buffer. */
-		typedef struct
-		{
-			uint8_t* CurrentByte; /**< Pointer to the current byte in the buffer */
-			uint8_t  ByteMask; /**< Mask of the current bit in the buffer */
-		} BitBufferPointer_t;
-
-		/** Type define for a circular packet bit buffer. */
-		typedef struct
-		{
-			uint8_t            Data[MAX_BITS / 8]; /**< Buffer to hold the stored bits in packed form */
-			uint16_t           Elements; /**< Number of stored bits in the bit buffer */
-
-			BitBufferPointer_t In; /**< Bit pointer to the next storage location in the buffer */
-			BitBufferPointer_t Out; /**< Bit pointer to the next retrieval location in the buffer */
-		} BitBuffer_t;
-
-	/* Function Prototypes: */
-		/** Initializes or resets a given bit buffer, ready to store new bits.
-		 *
-		 *  \param[in,out] Buffer  Bit buffer to initialize
-		 */
-		void BitBuffer_Init(BitBuffer_t* const Buffer) ATTR_NON_NULL_PTR_ARG(1);
-
-		/** Stores a bit into the next location inside a given bit buffer.
-		 *
-		 *  \param[in,out] Buffer  Bit buffer to store a bit into
-		 *  \param[in] Bit  Bit to store into the buffer
-		 */
-		void BitBuffer_StoreNextBit(BitBuffer_t* const Buffer,
-		                            const bool Bit) ATTR_NON_NULL_PTR_ARG(1);
-
-		/** Retrieves a bit from the next location inside a given bit buffer.
-		 *
-		 *  \param[in,out] Buffer  Bit buffer to retrieve a bit from
-		 *
-		 *  \return Next bit from the buffer
-		 */
-		bool BitBuffer_GetNextBit(BitBuffer_t* const Buffer) ATTR_NON_NULL_PTR_ARG(1);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Lib/MagstripeHW.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Lib/MagstripeHW.h
deleted file mode 100644
index 45c040eec6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Lib/MagstripeHW.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/*
-	NOTE: The user of this include file MUST define the following macros
-	prior to including the file:
-
-	MAG_T1_CLOCK_PIN   Pin connected to Track 1 clock wire (i.e.. PORTC1)
-	MAG_T1_DATA_PIN    Pin connected to Track 1 data wire (i.e.. PORTC2)
-	MAG_T2_CLOCK_PIN   Pin connected to Track 2 clock wire (i.e.. PORTC3)
-	MAG_T2_DATA_PIN    Pin connected to Track 2 data wire (i.e.. PORTC0)
-	MAG_T3_CLOCK_PIN   Pin connected to Track 3 clock wire (i.e.. PORTC5)
-	MAG_T3_DATA_PIN    Pin connected to Track 3 data wire (i.e.. PORTC6)
-	MAG_CLS_PIN        Pin connected to card loaded wire (i.e.. PORTC4)
-	MAG_PIN            PIN macro for the reader's port (i.e.. PINC)
-	MAG_DDR            DDR macro for the reader's port (i.e.. DDRC)
-	MAG_PORT           PORT macro for the reader's port (i.e.. PORTC)
-
-	The example macros listed above assume that the Track 2 data wire is
-	connected to pin 0 on port C, the Track 2 clock wire is connected to
-	pin 3 on port C (similarly for Tracks 1 and 3), and the card loaded
-	wire is connected to pin 4 on port C.
-
-	If the mag-stripe reader you are using only reads one or two tracks,
-	then set the clock and data pins for the tracks it doesn't read to a
-	pin that is unused.  For example, on the AT90USBKey, any of the pins on
-	port C that do not have wires attached will be unused since they are
-	not connected to any onboard devices (such as the joystick or
-	temperature sensor).
-
-	Connecting wires to pins on different ports (i.e.. a data wire to pin 0
-	on port C and a clock wire to pin 0 on port D) is currently
-	unsupported.  All pins specified above must be on the same port.
-*/
-
-/** \file
- *
- *  Driver header for a TTL Magnetic Card reader device (such as the Omron V3B-4K).
- */
-
-#ifndef _MAGSTRIPEHW_H_
-#define _MAGSTRIPEHW_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-
-		#include <LUFA/Common/Common.h>
-		#include "Config/AppConfig.h"
-
-	/* Private Interface - For use in library only: */
-		/* Macros: */
-			/** Mask of the track data, clock and card detection pins. */
-			#define MAG_MASK    (MAG_T1_DATA | MAG_T1_CLOCK | \
-			                     MAG_T2_DATA | MAG_T2_CLOCK | \
-			                     MAG_T3_DATA | MAG_T3_CLOCK | \
-			                     MAG_CARDPRESENT)
-
-	/* Public Interface - May be used in end-application: */
-		/* Inline Functions: */
-			/** Initializes the magnetic stripe card reader ports and pins so that the card reader
-			 *  device can be controlled and read by the card reader driver. This must be called before
-			 *  trying to read any of the card reader's status lines.
-			 */
-			static inline void Magstripe_Init(void)
-			{
-				MAG_DDR  &= ~MAG_MASK;
-				MAG_PORT |=  MAG_MASK;
-			};
-
-			/** Returns the status of all the magnetic card reader's outputs.
-			 *
-			 *  \return A mask indicating which card lines are high or low
-			 */
-			static inline uint8_t Magstripe_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
-			static inline uint8_t Magstripe_GetStatus(void)
-			{
-				/* Mag-stripe IOs are active low and must be inverted when read */
-				return ((uint8_t)~MAG_PIN & MAG_MASK);
-			}
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Magstripe.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Magstripe.c
deleted file mode 100644
index 7cf7373a2e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Magstripe.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MagStripe reader program. This file contains the main tasks of
- *  the project and is responsible for the initial application hardware configuration.
- */
-
-#include "Magstripe.h"
-
-/** Bit buffers to hold the read bits for each of the three magnetic card tracks before they are transmitted
- *  to the host as keyboard presses.
- */
-static BitBuffer_t TrackDataBuffers[TOTAL_TRACKS];
-
-/** Pointer to the current track buffer being sent to the host. */
-static BitBuffer_t* CurrentTrackBuffer = &TrackDataBuffers[TOTAL_TRACKS];
-
-/** Buffer to hold the previously generated Keyboard HID report, for comparison purposes inside the HID class driver. */
-static uint8_t PrevKeyboardHIDReportBuffer[sizeof(USB_KeyboardReport_Data_t)];
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Device_t Keyboard_HID_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber            = INTERFACE_ID_Keyboard,
-				.ReportINEndpoint           =
-					{
-						.Address            = KEYBOARD_EPADDR,
-						.Size               = KEYBOARD_EPSIZE,
-						.Banks              = 1,
-					},
-				.PrevReportINBuffer         = PrevKeyboardHIDReportBuffer,
-				.PrevReportINBufferSize     = sizeof(PrevKeyboardHIDReportBuffer),
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	for (uint8_t Buffer = 0; Buffer < TOTAL_TRACKS; Buffer++)
-	  BitBuffer_Init(&TrackDataBuffers[Buffer]);
-
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		if (Magstripe_GetStatus() & MAG_CARDPRESENT)
-		  ReadMagstripeData();
-
-		HID_Device_USBTask(&Keyboard_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Magstripe_Init();
-	USB_Init();
-}
-
-/** Determines if a card has been inserted, and if so reads in each track's contents into the bit buffers
- *  until they are read out to the host as a series of keyboard presses.
- */
-void ReadMagstripeData(void)
-{
-	/* Arrays to hold the buffer pointers, clock and data bit masks for the separate card tracks */
-	const struct
-	{
-		uint8_t ClockMask;
-		uint8_t DataMask;
-	} TrackInfo[] = {{MAG_T1_CLOCK, MAG_T1_DATA},
-	                 {MAG_T2_CLOCK, MAG_T2_DATA},
-	                 {MAG_T3_CLOCK, MAG_T3_DATA}};
-
-	uint8_t Magstripe_Prev = 0;
-	uint8_t Magstripe_LCL  = Magstripe_GetStatus();
-
-	while (Magstripe_LCL & MAG_CARDPRESENT)
-	{
-		for (uint8_t Track = 0; Track < TOTAL_TRACKS; Track++)
-		{
-			bool DataPinLevel      = ((Magstripe_LCL & TrackInfo[Track].DataMask) != 0);
-			bool ClockPinLevel     = ((Magstripe_LCL & TrackInfo[Track].ClockMask) != 0);
-			bool ClockLevelChanged = (((Magstripe_LCL ^ Magstripe_Prev) & TrackInfo[Track].ClockMask) != 0);
-
-			/* Sample data on rising clock edges from the card reader */
-			if (ClockPinLevel && ClockLevelChanged)
-			  BitBuffer_StoreNextBit(&TrackDataBuffers[Track], DataPinLevel);
-		}
-
-		Magstripe_Prev = Magstripe_LCL;
-		Magstripe_LCL  = Magstripe_GetStatus();
-	}
-
-	CurrentTrackBuffer = &TrackDataBuffers[0];
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	HID_Device_ConfigureEndpoints(&Keyboard_HID_Interface);
-
-	USB_Device_EnableSOFEvents();
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	HID_Device_ProcessControlRequest(&Keyboard_HID_Interface);
-}
-
-/** Event handler for the USB device Start Of Frame event. */
-void EVENT_USB_Device_StartOfFrame(void)
-{
-	HID_Device_MillisecondElapsed(&Keyboard_HID_Interface);
-}
-
-/** HID class driver callback function for the creation of HID reports to the host.
- *
- *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
- *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
- *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
- *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
- *
- *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
- */
-bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                         uint8_t* const ReportID,
-                                         const uint8_t ReportType,
-                                         void* ReportData,
-                                         uint16_t* const ReportSize)
-{
-	USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData;
-
-	static bool IsKeyReleaseReport;
-
-	/* Key reports must be interleaved with key release reports, or repeated keys will be ignored */
-	IsKeyReleaseReport = !IsKeyReleaseReport;
-
-	if ((IsKeyReleaseReport) || (CurrentTrackBuffer == &TrackDataBuffers[TOTAL_TRACKS]))
-	{
-		/* No more data to send, or key release report between key presses */
-		KeyboardReport->KeyCode[0] = KEY_NONE;
-	}
-	else if (!(CurrentTrackBuffer->Elements))
-	{
-		/* End of current track, send an enter press and change to the next track's buffer */
-		KeyboardReport->KeyCode[0] = KEY_ENTER;
-		CurrentTrackBuffer++;
-	}
-	else
-	{
-		/* Still data in the current track; convert next bit to a 1 or 0 keypress */
-		KeyboardReport->KeyCode[0] = BitBuffer_GetNextBit(CurrentTrackBuffer) ? KEY_1 : KEY_0;
-	}
-
-	*ReportSize = sizeof(USB_KeyboardReport_Data_t);
-	return false;
-}
-
-/** HID Class driver callback function for the processing of a received HID report from the host.
- *
- *  \param[in] HIDInterfaceInfo  Pointer to the HID interface structure for the HID interface being referenced
- *  \param[in] ReportID          Report ID of the received report from the host
- *  \param[in] ReportType        The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
- *  \param[in] ReportData        Pointer to the report buffer where the received report is stored
- *  \param[in] ReportSize        Size in bytes of the report received from the host
- */
-void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                          const uint8_t ReportID,
-                                          const uint8_t ReportType,
-                                          const void* ReportData,
-                                          const uint16_t ReportSize)
-{
-	// Ignore keyboard LED reports from the host, but still need to declare the callback routine
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Magstripe.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Magstripe.h
deleted file mode 100644
index 79a0f126f7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Magstripe.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2010  Denver Gingerich (denver [at] ossguy [dot] com)
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Magstripe.c.
- */
-
-#ifndef _MAGSTRIPE_H_
-#define _MAGSTRIPE_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-
-		#include "Descriptors.h"
-		#include "Lib/MagstripeHW.h"
-		#include "Lib/CircularBitBuffer.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** Total number of tracks which can be read from the card, between 1 and 3. */
-		#define TOTAL_TRACKS       3
-
-		/** HID keyboard keycode to indicate that no is currently pressed. */
-		#define KEY_NONE           0
-
-		/** HID keyboard keycode to indicate that the "1" key is currently pressed. */
-		#define KEY_1              30
-
-		/** HID keyboard keycode to indicate that the "0" key is currently pressed. */
-		#define KEY_0              39
-
-		/** HID keyboard keycode to indicate that the enter key is currently pressed. */
-		#define KEY_ENTER          40
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void ReadMagstripeData(void);
-
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                         uint8_t* const ReportID,
-		                                         const uint8_t ReportType,
-		                                         void* ReportData,
-		                                         uint16_t* const ReportSize);
-		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                          const uint8_t ReportID,
-		                                          const uint8_t ReportType,
-		                                          const void* ReportData,
-		                                          const uint16_t ReportSize);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Magstripe.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Magstripe.txt
deleted file mode 100644
index a11dfaf804..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/Magstripe.txt
+++ /dev/null
@@ -1,163 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Denver Gingerich's USBSnoop Magnetic Card Reader Project
- *
- *  \section Sec_Compat Project Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li AT90USB1287
- *  \li AT90USB1286
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this project.
- *
- * <table>
- *  <tr>
- *   <td><b>USB Mode:</b></td>
- *   <td>Device</td>
- *  </tr>
- *  <tr>
- *   <td><b>USB Class:</b></td>
- *   <td>Human Interface Device (HID)</td>
- *  </tr>
- *  <tr>
- *   <td><b>USB Subclass:</b></td>
- *   <td>Keyboard</td>
- *  </tr>
- *  <tr>
- *   <td><b>Relevant Standards:</b></td>
- *   <td>USBIF HID Standard, USBIF HID Usage Tables</td>
- *  </tr>
- *  <tr>
- *   <td><b>Supported USB Speeds:</b></td>
- *   <td>Full Speed Mode</td>
- *  </tr>
- * </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Firmware for a USB AVR powered USB TTL magnetic stripe reader (using a card
- *  reader such as the Omron V3B-4K) by Denver Gingerich. This project is designed
- *  to be used with the open source Stripe Snoop project at <a>http://stripesnoop.sourceforge.net/</a>.
- *
- *  See <a>http://ossguy.com/ss_usb/</a> for the USB reader hardware project website,
- *  including construction and support details.
- *
- *  To use, connect your magnetic card reader device to the USB AVR as follows (pin and port mapping may be adjusted
- *  from the project makefile):
- *
- *  <table>
- *   <tr>
- *    <th><b>Signal:</b></th>
- *    <th><b>AVR Port:</b></th>
- *   </tr>
- *   <tr>
- *    <td>Track 1 Data</td>
- *    <td>PORTC, Pin 1</td>
- *   </tr>
- *   <tr>
- *    <td>Track 1 Clock</td>
- *    <td>PORTC, Pin 2</td>
- *   </tr>
- *   <tr>
- *    <td>Track 2 Data</td>
- *    <td>PORTC, Pin 3</td>
- *   </tr>
- *   <tr>
- *    <td>Track 2 Clock</td>
- *    <td>PORTC, Pin 0</td>
- *   </tr>
- *   <tr>
- *    <td>Track 3 Data</td>
- *    <td>PORTC, Pin 5</td>
- *   </tr>
- *   <tr>
- *    <td>Track 3 Clock</td>
- *    <td>PORTC, Pin 6</td>
- *   </tr>
- *   <tr>
- *    <td>Card Detect</td>
- *    <td>PORTC, Pin 4</td>
- *   </tr>
- *  </table>
- *
- *  This project is based on the LUFA Keyboard project demonstration application, written by Denver Gingerich.
- *
- *  This application uses a keyboard HID driver to communicate the data collected a TTL magnetic stripe reader
- *  to the connected computer. The raw bitstream obtained from the magnetic stripe reader is "typed" through
- *  the keyboard driver as 0's and 1's. After every card swipe, the project will send a return key.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>MAX_BITS</td>
- *    <td>CircularBitBuffer.h</td>
- *    <td>Gives the maximum number of bits per track which can be buffered by the device for later transmission to a host.</td>
- *   </tr>
- *   <tr>
- *    <td>MAG_T1_CLOCK</td>
- *    <td>AppConfig.h</td>
- *    <td>Mask for the magnetic card reader's CLOCK line for the reader's track 1 output.</td>
- *   </tr>
- *   <tr>
- *    <td>MAG_T1_DATA</td>
- *    <td>AppConfig.h</td>
- *    <td>Mask for the magnetic card reader's DATA line for the reader's track 1 output.</td>
- *   </tr>
- *   <tr>
- *    <td>MAG_T2_CLOCK</td>
- *    <td>AppConfig.h</td>
- *    <td>Mask for the magnetic card reader's CLOCK line for the reader's track 2 output.</td>
- *   </tr>
- *   <tr>
- *    <td>MAG_T2_DATA</td>
- *    <td>AppConfig.h</td>
- *    <td>Mask for the magnetic card reader's DATA line for the reader's track 2 output.</td>
- *   </tr>
- *   <tr>
- *    <td>MAG_T3_CLOCK</td>
- *    <td>AppConfig.h</td>
- *    <td>Mask for the magnetic card reader's CLOCK line for the reader's track 3 output.</td>
- *   </tr>
- *   <tr>
- *    <td>MAG_T3_DATA</td>
- *    <td>AppConfig.h</td>
- *    <td>Mask for the magnetic card reader's DATA line for the reader's track 3 output.</td>
- *   </tr>
- *   <tr>
- *    <td>MAG_CARDPRESENT</td>
- *    <td>AppConfig.h</td>
- *    <td>Mask for the magnetic card reader's card detection output.</td>
- *   </tr>
- *   <tr>
- *    <td>MAG_PIN</td>
- *    <td>AppConfig.h</td>
- *    <td>PIN register that the magnetic card reader device is attached to.</td>
- *   </tr>
- *   <tr>
- *    <td>MAG_PORT</td>
- *    <td>AppConfig.h</td>
- *    <td>PORT register that the magnetic card reader device is attached to.</td>
- *   </tr>
- *   <tr>
- *    <td>MAG_DDR</td>
- *    <td>AppConfig.h</td>
- *    <td>DDR register that the magnetic card reader device is attached to.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/asf.xml
deleted file mode 100644
index 9fc5311e26..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/asf.xml
+++ /dev/null
@@ -1,52 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Magnetic Strip Card Reader" id="lufa.projects.magstripe.avr8">

-		<require idref="lufa.projects.magstripe"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.projects.magstripe" caption="Magnetic Strip Card Reader">

-		<info type="description" value="summary">

-		Magnetic strip card reader project.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="Magstripe.txt"/>

-

-		<build type="c-source" value="Magstripe.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Magstripe.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="c-source" value="Lib/CircularBitBuffer.c"/>

-		<build type="header-file" value="Lib/CircularBitBuffer.h"/>

-		<build type="header-file" value="Lib/MagstripeHW.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/doxyfile
deleted file mode 100644
index 7f112e1dc0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "Denver Gingerich's Stripe Snoop Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/makefile
deleted file mode 100644
index b45917fbf1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Magstripe/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = NONE
-F_CPU        = 16000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = Magstripe
-SRC          = $(TARGET).c Descriptors.c Lib/CircularBitBuffer.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/Config/LUFAConfig.h
deleted file mode 100644
index 078f7e6753..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-		#define DEVICE_STATE_AS_GPIOR            0
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/Descriptors.c
deleted file mode 100644
index 678ab6a942..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/Descriptors.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM MediaControlReport[] =
-{
-	HID_RI_USAGE_PAGE(8, 0x0C), /* Consumer Page */
-	HID_RI_USAGE(8, 0x01), /* Consumer Controls */
-	HID_RI_COLLECTION(8, 0x01), /* Application */
-		HID_RI_USAGE(8, 0xB0), /* Play */
-		HID_RI_USAGE(8, 0xB1), /* Pause */
-		HID_RI_USAGE(8, 0xB3), /* Fast Forward */
-		HID_RI_USAGE(8, 0xB4), /* Rewind */
-		HID_RI_USAGE(8, 0xB5), /* Next Track */
-		HID_RI_USAGE(8, 0xB6), /* Previous Track */
-		HID_RI_USAGE(8, 0xB7), /* Stop */
-		HID_RI_USAGE(8, 0xCD), /* Play/Pause (toggle) */
-		HID_RI_USAGE(8, 0xE2), /* Mute */
-		HID_RI_USAGE(8, 0xE9), /* Volume Up */
-		HID_RI_USAGE(8, 0xEA), /* Volume Down */
-		HID_RI_REPORT_SIZE(8, 0x01),
-		HID_RI_REPORT_COUNT(8, 0x0B),
-		HID_RI_LOGICAL_MINIMUM(8, 0),
-		HID_RI_LOGICAL_MAXIMUM(8, 1),
-		HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE),
-		HID_RI_REPORT_COUNT(8, 0x05),
-		HID_RI_INPUT(8, HID_IOF_CONSTANT),
-	HID_RI_END_COLLECTION(0),
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x206A,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = NO_DESCRIPTOR,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.HID_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_HID,
-			.AlternateSetting       = 0x00,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_NonBootSubclass,
-			.Protocol               = HID_CSCP_NonBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_MediaControlHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(MediaControlReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MEDIACONTROL_HID_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MEDIACONTROL_HID_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Media Controller");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_MediaControlHID;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case HID_DTYPE_Report:
-			Address = &MediaControlReport;
-			Size    = sizeof(MediaControlReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/Descriptors.h
deleted file mode 100644
index b8c0b88594..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/Descriptors.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Media Controller HID Interface
-			USB_Descriptor_Interface_t            HID_Interface;
-			USB_HID_Descriptor_HID_t              HID_MediaControlHID;
-			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_HID = 0, /**< HID interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Macros: */
-		/** Endpoint address of the Media Control HID reporting IN endpoint. */
-		#define MEDIACONTROL_HID_EPADDR           (ENDPOINT_DIR_IN | 1)
-
-		/** Size in bytes of the Media Control HID reporting IN endpoint. */
-		#define MEDIACONTROL_HID_EPSIZE           8
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/MediaController.c b/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/MediaController.c
deleted file mode 100644
index 70522e7b20..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/MediaController.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the MediaControl project. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "MediaController.h"
-
-/** Buffer to hold the previously generated Media Control HID report, for comparison purposes inside the HID class driver. */
-static uint8_t PrevMediaControlHIDReportBuffer[sizeof(USB_MediaReport_Data_t)];
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Device_t MediaControl_HID_Interface =
- 	{
-		.Config =
-			{
-				.InterfaceNumber              = INTERFACE_ID_HID,
-				.ReportINEndpoint             =
-					{
-						.Address              = MEDIACONTROL_HID_EPADDR,
-						.Size                 = MEDIACONTROL_HID_EPSIZE,
-						.Banks                = 1,
-					},
-				.PrevReportINBuffer           = PrevMediaControlHIDReportBuffer,
-				.PrevReportINBufferSize       = sizeof(PrevMediaControlHIDReportBuffer),
-			},
-    };
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		HID_Device_USBTask(&MediaControl_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware()
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Joystick_Init();
-	LEDs_Init();
-	Buttons_Init();
-	USB_Init();
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= HID_Device_ConfigureEndpoints(&MediaControl_HID_Interface);
-
-	USB_Device_EnableSOFEvents();
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	HID_Device_ProcessControlRequest(&MediaControl_HID_Interface);
-}
-
-/** Event handler for the USB device Start Of Frame event. */
-void EVENT_USB_Device_StartOfFrame(void)
-{
-	HID_Device_MillisecondElapsed(&MediaControl_HID_Interface);
-}
-
-/** HID class driver callback function for the creation of HID reports to the host.
- *
- *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
- *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
- *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
- *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
- *
- *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
- */
-bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                         uint8_t* const ReportID,
-                                         const uint8_t ReportType,
-                                         void* ReportData,
-                                         uint16_t* const ReportSize)
-{
-	USB_MediaReport_Data_t* MediaReport = (USB_MediaReport_Data_t*)ReportData;
-
-	uint8_t JoyStatus_LCL    = Joystick_GetStatus();
-	uint8_t ButtonStatus_LCL = Buttons_GetStatus();
-
-	/* Update the Media Control report with the user button presses */
-	MediaReport->Mute          = ((ButtonStatus_LCL & BUTTONS_BUTTON1) ? true : false);
-	MediaReport->PlayPause     = ((JoyStatus_LCL & JOY_PRESS) ? true : false);
-	MediaReport->VolumeUp      = ((JoyStatus_LCL & JOY_UP)    ? true : false);
-	MediaReport->VolumeDown    = ((JoyStatus_LCL & JOY_DOWN)  ? true : false);
-	MediaReport->PreviousTrack = ((JoyStatus_LCL & JOY_LEFT)  ? true : false);
-	MediaReport->NextTrack     = ((JoyStatus_LCL & JOY_RIGHT) ? true : false);
-
-	*ReportSize = sizeof(USB_MediaReport_Data_t);
-	return false;
-}
-
-/** HID class driver callback function for the processing of HID reports from the host.
- *
- *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in] ReportID    Report ID of the received report from the host
- *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
- *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
- *  \param[in] ReportSize  Size in bytes of the received HID report
- */
-void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                          const uint8_t ReportID,
-                                          const uint8_t ReportType,
-                                          const void* ReportData,
-                                          const uint16_t ReportSize)
-{
-	// Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/MediaController.h b/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/MediaController.h
deleted file mode 100644
index 6a36d44219..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/MediaController.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MediaControl.c.
- */
-
-#ifndef _MEDIACONTROL_H_
-#define _MEDIACONTROL_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-		#include <string.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Type Defines: */
-		/** Type define for a Media Control HID report. This report contains the bits to match the usages defined
-		 *  in the HID report of the device. When set to a true value, the relevant media controls on the host will
-		 *  be triggered.
-		 */
-		typedef struct
-		{
-			unsigned Play           : 1;
-			unsigned Pause          : 1;
-			unsigned FForward       : 1;
-			unsigned Rewind         : 1;
-			unsigned NextTrack      : 1;
-			unsigned PreviousTrack  : 1;
-			unsigned Stop           : 1;
-			unsigned PlayPause      : 1;
-			unsigned Mute           : 1;
-			unsigned VolumeUp       : 1;
-			unsigned VolumeDown     : 1;
-			unsigned RESERVED       : 5;
-		} ATTR_PACKED USB_MediaReport_Data_t;
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_StartOfFrame(void);
-
-		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                         uint8_t* const ReportID,
-		                                         const uint8_t ReportType,
-		                                         void* ReportData,
-		                                         uint16_t* const ReportSize);
-		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                          const uint8_t ReportID,
-		                                          const uint8_t ReportType,
-		                                          const void* ReportData,
-		                                          const uint16_t ReportSize);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/MediaController.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/MediaController.txt
deleted file mode 100644
index dece2132a1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/MediaController.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Media Controller Project
- *
- *  \section Sec_Compat Project Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification \n
- *        USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode \n
- *        Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Media Controller project. This project implements a basic Media Control device, to signal the host to play, pause, toggle playback,
- *  mute and/or adjust the host volume, in addition to other such media commands. This project may be extended to create a dedicated
- *  media playback control device, for home media centers or other equipment. By default, some of the most commonly used playback controls
- *  are controlled by the board joystick and LEDs, however this may be altered as desired.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/asf.xml
deleted file mode 100644
index 2d476da51a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/asf.xml
+++ /dev/null
@@ -1,50 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Media Controller" id="lufa.projects.media_control.avr8">

-		<require idref="lufa.projects.media_control"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.projects.media_control" caption="Media Controller">

-		<info type="description" value="summary">

-		Magnetic strip card reader project.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MediaController.txt"/>

-

-		<build type="c-source" value="MediaController.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="MediaController.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.buttons"/>

-		<require idref="lufa.drivers.board.joystick"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/doxyfile
deleted file mode 100644
index f6fff73549..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - Media Controller Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/makefile
deleted file mode 100644
index 7db3338100..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MediaController/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MediaController
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/Config/LUFAConfig.h
deleted file mode 100644
index 38f4dca9e8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-//		#define FIXED_CONTROL_ENDPOINT_SIZE      {Insert Value Here}
-//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
-//		#define FIXED_NUM_CONFIGURATIONS         {Insert Value Here}
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-		#define HOST_STATE_AS_GPIOR              0
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/ConfigDescriptor.c b/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/ConfigDescriptor.c
deleted file mode 100644
index a90e25548e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/ConfigDescriptor.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- *  needed to communication with an attached USB device. Descriptors are special  computer-readable structures
- *  which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- *  routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- *  with compatible devices.
- *
- *  This routine searches for a HID interface descriptor containing at least one Interrupt type IN endpoint.
- *
- *  \return An error code from the GenericHIDHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
-	uint8_t  ConfigDescriptorData[512];
-	void*    CurrConfigLocation = ConfigDescriptorData;
-	uint16_t CurrConfigBytesRem;
-
-	USB_Descriptor_Interface_t* HIDInterface    = NULL;
-	USB_Descriptor_Endpoint_t*  DataINEndpoint  = NULL;
-	USB_Descriptor_Endpoint_t*  DataOUTEndpoint = NULL;
-
-	/* Retrieve the entire configuration descriptor into the allocated buffer */
-	switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
-	{
-		case HOST_GETCONFIG_Successful:
-			break;
-		case HOST_GETCONFIG_InvalidData:
-			return InvalidConfigDataReturned;
-		case HOST_GETCONFIG_BuffOverflow:
-			return DescriptorTooLarge;
-		default:
-			return ControlError;
-	}
-
-	while (!(DataINEndpoint) || !(DataOUTEndpoint))
-	{
-		/* See if we've found a likely compatible interface, and if there is an endpoint within that interface */
-		if (!(HIDInterface) ||
-		    USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-		                              DComp_NextHIDInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
-		{
-			/* Not all HID devices have an OUT endpoint - if we've reached the end of the HID descriptor
-			 * but only found the mandatory IN endpoint, it's safe to continue with the device enumeration */
-			if (DataINEndpoint)
-			  break;
-
-			/* Get the next HID interface from the configuration descriptor */
-			if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
-			                              DComp_NextHIDInterface) != DESCRIPTOR_SEARCH_COMP_Found)
-			{
-				/* Descriptor not found, error out */
-				return NoCompatibleInterfaceFound;
-			}
-
-			/* Save the interface in case we need to refer back to it later */
-			HIDInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t);
-
-			/* Clear any found endpoints */
-			DataOUTEndpoint = NULL;
-
-			/* Skip the remainder of the loop as we have not found an endpoint yet */
-			continue;
-		}
-
-		/* Retrieve the endpoint address from the endpoint descriptor */
-		USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
-		/* If the endpoint is a IN type endpoint */
-		if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
-		  DataINEndpoint  = EndpointData;
-		else
-		  DataOUTEndpoint = EndpointData;
-	}
-
-	/* Configure the HID data IN pipe */
-	Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1);
-	Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS);
-
-	/* Check if the HID interface contained an optional OUT data endpoint */
-	if (DataOUTEndpoint)
-	{
-		/* Configure the HID data OUT pipe */
-		Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1);
-	}
-
-	/* Valid data found, return success */
-	return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Interface descriptor of the correct HID Class value.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextHIDInterface(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	/* Determine if the current descriptor is an interface descriptor */
-	if (Header->Type == DTYPE_Interface)
-	{
-		USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
-		/* Check the HID descriptor class and protocol, break out if correct class/protocol interface found */
-		if (Interface->Class == HID_CLASS)
-		{
-			/* Indicate that the descriptor being searched for has been found */
-			return DESCRIPTOR_SEARCH_Found;
-		}
-	}
-
-	/* Current descriptor does not match what this comparator is looking for */
-	return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- *  configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- *  descriptor processing if an incompatible descriptor configuration is found.
- *
- *  This comparator searches for the next Endpoint descriptor inside the current interface descriptor,
- *  aborting the search if another interface descriptor is found before the required endpoint.
- *
- *  \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextHIDInterfaceDataEndpoint(void* CurrentDescriptor)
-{
-	USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
-	/* Determine the type of the current descriptor */
-	if (Header->Type == DTYPE_Endpoint)
-	{
-		/* Indicate that the descriptor being searched for has been found */
-		return DESCRIPTOR_SEARCH_Found;
-	}
-	else if (Header->Type == DTYPE_Interface)
-	{
-		/* Indicate that the search has failed prematurely and should be aborted */
-		return DESCRIPTOR_SEARCH_Fail;
-	}
-	else
-	{
-		/* Current descriptor does not match what this comparator is looking for */
-		return DESCRIPTOR_SEARCH_NotFound;
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/ConfigDescriptor.h b/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/ConfigDescriptor.h
deleted file mode 100644
index 50481340d8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/ConfigDescriptor.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "MissileLauncher.h"
-
-	/* Macros: */
-		/** Interface Class value for the Human Interface Device class. */
-		#define HID_CLASS                 0x03
-
-		/** Pipe address for the HID data IN pipe. */
-		#define HID_DATA_IN_PIPE          (PIPE_DIR_IN  | 1)
-
-		/** Pipe address for the HID data OUT pipe. */
-		#define HID_DATA_OUT_PIPE         (PIPE_DIR_OUT | 2)
-
-	/* Enums: */
-		/** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */
-		enum GenericHIDHost_GetConfigDescriptorDataCodes_t
-		{
-			SuccessfulConfigRead            = 0, /**< Configuration Descriptor was processed successfully */
-			ControlError                    = 1, /**< A control request to the device failed to complete successfully */
-			DescriptorTooLarge              = 2, /**< The device's Configuration Descriptor is too large to process */
-			InvalidConfigDataReturned       = 3, /**< The device returned an invalid Configuration Descriptor */
-			NoCompatibleInterfaceFound      = 4, /**< A compatible interface with the required endpoints was not found */
-		};
-
-	/* Function Prototypes: */
-		uint8_t ProcessConfigurationDescriptor(void);
-
-		uint8_t DComp_NextHIDInterface(void* CurrentDescriptor);
-		uint8_t DComp_NextHIDInterfaceDataEndpoint(void* CurrentDescriptor);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/MissileLauncher.c b/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/MissileLauncher.c
deleted file mode 100644
index a33c4cf7e3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/MissileLauncher.c
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
-            USB Missile Launcher Demo
-        Copyright (C) Dave Fletcher, 2010.
-         fletch at fletchtronics dot net
-
-       Based on research by Scott Weston at
-        http://code.google.com/p/pymissile
- */
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2010  Dave Fletcher (fletch [at] fletchtronics [dot] net)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/*
- *  Missile Launcher host. This is a host driver for the popular USB-controller table top toy missile launchers,
- *  which can typically aim and fire small foam "missiles" from a spring-loaded turret. This project controls the
- *  launcher via a joystick and button to aim and fire missiles at targets without a PC.
- */
-
-/** \file
- *
- *  Main source file for the MissileLauncher application. This file contains the main tasks of
- *  the application and is responsible for the initial application hardware configuration as well
- *  as the sending of commands to the attached launcher toy.
- */
-
-#include "MissileLauncher.h"
-
-/** Launcher first init command report data sequence */
-static const uint8_t CMD_INITA[8]     = {  85, 83, 66, 67,  0,  0,  4,  0  };
-
-/** Launcher second init command report data sequence */
-static const uint8_t CMD_INITB[8]     = {  85, 83, 66, 67,  0, 64,  2,  0  };
-
-/** Launcher command report data sequence to stop all movement */
-static const uint8_t CMD_STOP[8]      = {   0,  0,  0,  0,  0,  0,  8,  8  };
-
-/** Launcher command report data sequence to move left */
-static const uint8_t CMD_LEFT[8]      = {   0,  1,  0,  0,  0,  0,  8,  8  };
-
-/** Launcher command report data sequence to move right */
-static const uint8_t CMD_RIGHT[8]     = {   0,  0,  1,  0,  0,  0,  8,  8  };
-
-/** Launcher command report data sequence to move up */
-static const uint8_t CMD_UP[8]        = {   0,  0,  0,  1,  0,  0,  8,  8  };
-
-/** Launcher command report data sequence to move down */
-static const uint8_t CMD_DOWN[8]      = {   0,  0,  0,  0,  1,  0,  8,  8  };
-
-/** Launcher command report data sequence to move left and up */
-static const uint8_t CMD_LEFTUP[8]    = {   0,  1,  0,  1,  0,  0,  8,  8  };
-
-/** Launcher command report data sequence to move right and up */
-static const uint8_t CMD_RIGHTUP[8]   = {   0,  0,  1,  1,  0,  0,  8,  8  };
-
-/** Launcher command report data sequence to move left and down */
-static const uint8_t CMD_LEFTDOWN[8]  = {   0,  1,  0,  0,  1,  0,  8,  8  };
-
-/** Launcher command report data sequence to move right and down */
-static const uint8_t CMD_RIGHTDOWN[8] = {   0,  0,  1,  0,  1,  0,  8,  8  };
-
-/** Launcher command report data sequence to fire a missile */
-static const uint8_t CMD_FIRE[8]      = {   0,  0,  0,  0,  0,  1,  8,  8  };
-
-/** Last command sent to the launcher, to determine what new command (if any) must be sent */
-static const uint8_t* CmdState;
-
-/** Buffer to hold a command to send to the launcher */
-static uint8_t CmdBuffer[LAUNCHER_CMD_BUFFER_SIZE];
-
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	CmdState = CMD_STOP;
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		Read_Joystick_Status();
-		DiscardNextReport();
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	USB_Init();
-	Joystick_Init();
-	Buttons_Init();
-}
-
-/** Reads the joystick and button status, sending commands to the launcher as needed. */
-void Read_Joystick_Status(void)
-{
-	uint8_t JoyStatus_LCL = Joystick_GetStatus();
-	uint8_t Buttons_LCL   = Buttons_GetStatus();
-
-	if (Buttons_LCL & BUTTONS_BUTTON1)
-	  Send_Command(CMD_FIRE);
-	else if (JoyStatus_LCL & JOY_UP)
-	  Send_Command(CMD_UP);
-	else if (JoyStatus_LCL & JOY_DOWN)
-	  Send_Command(CMD_DOWN);
-	else if (JoyStatus_LCL & JOY_LEFT)
-	  Send_Command(CMD_LEFT);
-	else if (JoyStatus_LCL & JOY_RIGHT)
-	  Send_Command(CMD_RIGHT);
-	else if (CmdState != CMD_STOP)
-	  Send_Command(CMD_STOP);
-}
-
-/** Lower level send routine, copies report into a larger buffer and sends.
- *
- *  \param[in] Report  Report data to send.
- *  \param[in] ReportSize  Report length in bytes.
- */
-void Send_Command_Report(const uint8_t* const Report,
-                         const uint16_t ReportSize)
-{
-	memcpy(CmdBuffer, Report, 8);
-	WriteNextReport(CmdBuffer, ReportSize);
-}
-
-/** Sends one of the \c CMD_* command constants to the attached device.
- *
- *  \param[in] Command  One of the command constants.
- */
-void Send_Command(const uint8_t* const Command)
-{
-	if ((CmdState == CMD_STOP && Command != CMD_STOP) ||
-		(CmdState != CMD_STOP && Command == CMD_STOP))
-	{
-		LEDs_ToggleLEDs(LEDS_LED4);
-
-		Send_Command_Report(CMD_INITA, 8);
-		Send_Command_Report(CMD_INITB, 8);
-		Send_Command_Report(Command, LAUNCHER_CMD_BUFFER_SIZE);
-	}
-
-	CmdState = Command;
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	/* Get and process the configuration descriptor data */
-	if (ProcessConfigurationDescriptor() != SuccessfulConfigRead)
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-                                            const uint8_t SubErrorCode)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Reads in and discards the next report from the attached device. */
-void DiscardNextReport(void)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	/* Select and unfreeze HID data IN pipe */
-	Pipe_SelectPipe(HID_DATA_IN_PIPE);
-	Pipe_Unfreeze();
-
-	/* Check to see if a packet has been received */
-	if (!(Pipe_IsINReceived()))
-	{
-		/* Refreeze HID data IN pipe */
-		Pipe_Freeze();
-
-		return;
-	}
-
-	/* Clear the IN endpoint, ready for next data packet */
-	Pipe_ClearIN();
-
-	/* Refreeze HID data IN pipe */
-	Pipe_Freeze();
-}
-
-/** Writes a report to the attached device.
- *
- *  \param[in] ReportOUTData  Buffer containing the report to send to the device
- *  \param[in] ReportLength  Length of the report to send
- */
-void WriteNextReport(uint8_t* const ReportOUTData,
-                     const uint16_t ReportLength)
-{
-	if (USB_HostState != HOST_STATE_Configured)
-	  return;
-
-	/* Select and unfreeze HID data OUT pipe */
-	Pipe_SelectPipe(HID_DATA_OUT_PIPE);
-
-	/* Not all HID devices have an OUT endpoint (some require OUT reports to be sent over the
-	 * control endpoint instead) - check to see if the OUT endpoint has been initialized */
-	if (Pipe_IsConfigured())
-	{
-		Pipe_Unfreeze();
-
-		/* Ensure pipe is ready to be written to before continuing */
-		if (!(Pipe_IsOUTReady()))
-		{
-			/* Refreeze the data OUT pipe */
-			Pipe_Freeze();
-
-			return;
-		}
-
-		/* Write out HID report data */
-		Pipe_Write_Stream_LE(ReportOUTData, ReportLength, NULL);
-
-		/* Clear the OUT endpoint, send last data packet */
-		Pipe_ClearOUT();
-
-		/* Refreeze the data OUT pipe */
-		Pipe_Freeze();
-	}
-	else
-	{
-		/* Class specific request to send a HID report to the device */
-		USB_ControlRequest = (USB_Request_Header_t)
-			{
-				.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
-				.bRequest      = HID_REQ_SetReport,
-				.wValue        = 0x02,
-				.wIndex        = 0x01,
-				.wLength       = ReportLength,
-			};
-
-		/* Select the control pipe for the request transfer */
-		Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
-		/* Send the request to the device */
-		USB_Host_SendControlRequest(ReportOUTData);
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/MissileLauncher.h b/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/MissileLauncher.h
deleted file mode 100644
index 3a50573223..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/MissileLauncher.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for MissileLauncher.c.
- */
-
-#ifndef _MISSILELAUNCHER_HOST_H_
-#define _MISSILELAUNCHER_HOST_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/interrupt.h>
-		#include <avr/power.h>
-		#include <string.h>
-		#include <stdio.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/Buttons.h>
-		#include <LUFA/Drivers/Board/Joystick.h>
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "ConfigDescriptor.h"
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING   (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY         (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR         (LEDS_LED1 | LEDS_LED3)
-
-		/** Size of the Launcher report command buffer. */
-		#define LAUNCHER_CMD_BUFFER_SIZE  64
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void Read_Joystick_Status(void);
-        void Send_Command_Report(const uint8_t* const Report,
-		                         const uint16_t ReportSize);
-        void Send_Command(const uint8_t* const Command);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-		void DiscardNextReport(void);
-		void WriteNextReport(uint8_t* const ReportOUTData,
-		                     const uint16_t ReportLength);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/MissileLauncher.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/MissileLauncher.txt
deleted file mode 100644
index a0ddd15cd7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/MissileLauncher.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage David Fletcher's Missile Launcher
- *
- *  \section Sec_Compat Project Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this project.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Host</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Human Interface Device (HID)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF HID Specification, USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Low Speed Mode, Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Missile Launcher host. This is a host driver for the popular USB-controller table top toy missile launchers,
- *  which can typically aim and fire small foam "missiles" from a spring-loaded turret. This project controls the
- *  launcher via a joystick and button to aim and fire missiles at targets without a PC.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/asf.xml
deleted file mode 100644
index 1b8ac1bd56..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/asf.xml
+++ /dev/null
@@ -1,49 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Missile Launcher" id="lufa.projects.missile_launcher.avr8">

-		<require idref="lufa.projects.missile_launcher"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.projects.missile_launcher" caption="Missile Launcher">

-		<info type="description" value="summary">

-		Missile launcher project.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Host"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="MissileLauncher.txt"/>

-

-		<build type="c-source" value="MissileLauncher.c"/>

-		<build type="c-source" value="ConfigDescriptor.c"/>

-		<build type="header-file" value="MissileLauncher.h"/>

-		<build type="header-file" value="ConfigDescriptor.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.buttons"/>

-		<require idref="lufa.drivers.board.joystick"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/doxyfile
deleted file mode 100644
index 37f91e4e90..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "Dave Fletcher's Missile Launcher Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/makefile
deleted file mode 100644
index 635f5d5a82..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/MissileLauncher/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = MissileLauncher
-SRC          = $(TARGET).c ConfigDescriptor.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/Config/LUFAConfig.h
deleted file mode 100644
index f561bf68f8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-		#define DEVICE_STATE_AS_GPIOR            0
-		#define FIXED_NUM_CONFIGURATIONS         1
-		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              0
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/Descriptors.c
deleted file mode 100644
index d5951867a8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/Descriptors.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2010  OBinou (obconseil [at] gmail [dot] com)
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM RelayBoard_DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_VendorSpecificClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x04B4,
-	.ProductID              = 0xFD11,
-	.ReleaseNumber          = VERSION_BCD(2,0,0),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = STRING_ID_Serial,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM RelayBoard_ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 1,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = USB_CONFIG_ATTR_RESERVED,
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(500)
-		},
-
-	.RelayBoardInterface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_RelayBoard,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 0,
-
-			.Class                  = USB_CSCP_VendorSpecificClass,
-			.SubClass               = 0x00,
-			.Protocol               = 0x00,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM RelayBoard_LanguageString =
-{
-	.Header                 = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
-
-	.UnicodeString          = {LANGUAGE_ID_ENG}
-};
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM RelayBoard_ManufacturerString = USB_STRING_DESCRIPTOR(L"SISPM");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM RelayBoard_ProductString = USB_STRING_DESCRIPTOR(L"RelayBoard");
-
-/** Serial number string. This is a Unicode string containing the device's unique serial number, expressed as a
- *  series of uppercase hexadecimal digits.
- */
-const USB_Descriptor_String_t PROGMEM RelayBoard_SerialString = USB_STRING_DESCRIPTOR(L"00001");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &RelayBoard_DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &RelayBoard_ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &RelayBoard_LanguageString;
-					Size    = pgm_read_byte(&RelayBoard_LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &RelayBoard_ManufacturerString;
-					Size    = pgm_read_byte(&RelayBoard_ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &RelayBoard_ProductString;
-					Size    = pgm_read_byte(&RelayBoard_ProductString.Header.Size);
-					break;
-				case STRING_ID_Serial:
-					Address = &RelayBoard_SerialString;
-					Size    = pgm_read_byte(&RelayBoard_SerialString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/Descriptors.h
deleted file mode 100644
index 33790dc69e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/Descriptors.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2010  OBinou (obconseil [at] gmail [dot] com)
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Relay Board Interface
-			USB_Descriptor_Interface_t            RelayBoardInterface;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_RelayBoard = 0, /**< Relay board interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-			STRING_ID_Serial       = 3, /**< Serial number string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/RelayBoard.c b/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/RelayBoard.c
deleted file mode 100644
index dccfe11a49..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/RelayBoard.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2010  OBinou (obconseil [at] gmail [dot] com)
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the RelayBoard program. This file contains the main tasks of
- *  the project and is responsible for the initial application hardware configuration.
- */
-
-#include "RelayBoard.h"
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	GlobalInterruptEnable();
-
-	for (;;)
-	  USB_USBTask();
-}
-
-/** Configures the board hardware and chip peripherals for the project's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	USB_Init();
-
-	/* Initialize Relays */
-	DDRC  |=  ALL_RELAYS;
-	PORTC &= ~ALL_RELAYS;
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-    const uint8_t SerialNumber[5] = { 0, 0, 0, 0, 1 };
-	uint8_t ControlData[2]        = { 0, 0 };
-
-    switch (USB_ControlRequest.bRequest)
-	{
-		case 0x09:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				LEDs_ToggleLEDs(LEDS_LED1);
-
-				Endpoint_ClearSETUP();
-
-				Endpoint_Read_Control_Stream_LE(ControlData, sizeof(ControlData));
-				Endpoint_ClearIN();
-
-				switch (USB_ControlRequest.wValue)
-				{
-					case 0x303:
-						if (ControlData[1]) PORTC &= ~RELAY1; else PORTC |= RELAY1;
-						break;
-					case 0x306:
-						if (ControlData[1]) PORTC &= ~RELAY2; else PORTC |= RELAY2;
-						break;
-					case 0x309:
-						if (ControlData[1]) PORTC &= ~RELAY3; else PORTC |= RELAY3;
-						break;
-					case 0x30c:
-						if (ControlData[1]) PORTC &= ~RELAY4; else PORTC |= RELAY4;
-						break;
-				}
-			}
-
-			break;
-		case 0x01:
-			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-			{
-				LEDs_ToggleLEDs(LEDS_LED1);
-
-				Endpoint_ClearSETUP();
-
-				switch (USB_ControlRequest.wValue)
-				{
-					case 0x301:
-						Endpoint_Write_Control_Stream_LE(SerialNumber, sizeof(SerialNumber));
-						break;
-					case 0x303:
-						ControlData[1] = (PORTC & RELAY1) ? 2 : 3;
-						break;
-					case 0x306:
-						ControlData[1] = (PORTC & RELAY2) ? 2 : 3;
-						break;
-					case 0x309:
-						ControlData[1] = (PORTC & RELAY3) ? 2 : 3;
-						break;
-					case 0x30c:
-						ControlData[1] = (PORTC & RELAY4) ? 2 : 3;
-						break;
-				}
-
-				if (ControlData[1])
-				  Endpoint_Write_Control_Stream_LE(ControlData, sizeof(ControlData));
-
-				Endpoint_ClearOUT();
-			}
-
-			break;
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/RelayBoard.h b/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/RelayBoard.h
deleted file mode 100644
index c2269224f5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/RelayBoard.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2010  OBinou (obconseil [at] gmail [dot] com)
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for RelayBoard.c.
- */
-
-#ifndef _RELAYBOARD_H_
-#define _RELAYBOARD_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		#define RELAY1      (1 << 7)
-		#define RELAY2      (1 << 6)
-		#define RELAY3      (1 << 5)
-		#define RELAY4      (1 << 4)
-		#define ALL_RELAYS  (RELAY1 | RELAY2 | RELAY3 | RELAY4)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/RelayBoard.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/RelayBoard.txt
deleted file mode 100644
index 4b190dfe32..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/RelayBoard.txt
+++ /dev/null
@@ -1,106 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage OB's Quad-Relay outlet control using a Teensy2++
- *
- *  \section Sec_Compat Project Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li AT90USB1286
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this project.
- *
- * <table>
- *  <tr>
- *   <td><b>USB Mode:</b></td>
- *   <td>Device</td>
- *  </tr>
- *  <tr>
- *   <td><b>USB Class:</b></td>
- *   <td>None</td>
- *  </tr>
- *  <tr>
- *   <td><b>USB Subclass:</b></td>
- *   <td>None</td>
- *  </tr>
- *  <tr>
- *   <td><b>Relevant Standards:</b></td>
- *   <td>USB Standards</td>
- *  </tr>
- *  <tr>
- *   <td><b>Supported USB Speeds:</b></td>
- *   <td>Low Speed Mode, Full Speed Mode</td>
- *  </tr>
- * </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Firmware for a Teensy2++ AVR-based miniboard to control four relays, using the
- *  same protocol used by the commercially available Silver Shield PM power outlets
- *  ( http://sourceforge.net/projects/sispmctl ) sold for some time. Because this
- *  project mimics the original device, it can be controlled using the "sismpctl"
- *  package included in many Linux distributions - including router-orientated
- *  versions such as OpenWRT - to control the board's relays.
- *
- *  Relays 1 to 4 are respectively wired to pins C4, C5, C6 and C7 of the Teensy++ V2,
- *  which are the PORTC bits 4 to 7 of the AT90USB1286. The relays MUST be wired through
- *  a transistor, and a diode must be added in antiparallel on the relay's coil pins to
- *  protect the transistor from back EMF generated from the relay when the coil is turned off.
- *  The transistor base pin is wired to the Teensy data port through a 10K resistor. A
- *  LED may be also be added as a relay status indicator on each channel.
- *
- *  The Relay coil will be driven by the transistor, but the power will come from
- *  the 5V from the PC's USB port: Be careful in choosing the relay to avoid overloading
- *  the PC, as the maximum current used MUST remains under ~450mA @ 5V.
- *
- *  The author's tested relays are 2 Finder 32.21.7.005.2000, coil il 125ohm, which can
- *  handle 5A @ 250VAC. Be careful to use proper isolation if high voltages are manipulated.
- *  The author used Hotglue to isolate all parts of the PCB in contact with high voltage.
- *
- *  See <a>http://www.pjrc.com/teensy/</a> for the Teensy2++ website.
- *
- *  <table>
- *   <tr>
- *    <td><b>Signal:</b></td>
- *    <td><b>AVR Port:</b></td>
- *   </tr>
- *   <tr>
- *    <td>Relay 1</td>
- *    <td>PORTC, Pin 4</td>
- *   </tr>
- *   <tr>
- *    <td>Relay 2</td>
- *    <td>PORTC, Pin 5</td>
- *   </tr>
- *   <tr>
- *    <td>Relay 3</td>
- *    <td>PORTC, Pin 6</td>
- *   </tr>
- *   <tr>
- *    <td>Relay 4</td>
- *    <td>PORTC, Pin 7</td>
- *   </tr>
- *   <tr>
- *    <td>Teensy2++ Yellow Led</td>
- *    <td>PORTD, pin 6</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/asf.xml
deleted file mode 100644
index e3a2ef4b20..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/asf.xml
+++ /dev/null
@@ -1,47 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Relay Board Controller" id="lufa.projects.relay_board.avr8">

-		<require idref="lufa.projects.relay_board"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.projects.relay_board" caption="Relay Board Controller">

-		<info type="description" value="summary">

-		Relay Board Controller project.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Low Level APIs"/>

-			<keyword value="USB Device"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="RelayBoard.txt"/>

-

-		<build type="c-source" value="RelayBoard.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="RelayBoard.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/doxyfile
deleted file mode 100644
index 6c119a5559..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "OB's Dual-Relay Outlet Control Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/makefile
deleted file mode 100644
index bde15357ee..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/RelayBoard/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = RelayBoard
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Config/LUFAConfig.h
deleted file mode 100644
index 1bf1f19e65..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-		#define DEVICE_STATE_AS_GPIOR            0
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Descriptors.c
deleted file mode 100644
index f6ee88e21c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Descriptors.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2012  Simon Foster (simon.foster [at] inbox [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
-	#warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = CDC_CSCP_CDCClass,
-	.SubClass               = CDC_CSCP_NoSpecificSubclass,
-	.Protocol               = CDC_CSCP_NoSpecificProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x204B,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 2,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.CDC_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x06,
-		},
-
-	.CDC_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
-		},
-
-	.CDC_NotificationEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Simon Foster");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"USB-HD44780 Adapter");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Descriptors.h
deleted file mode 100644
index ed26aeed1f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Descriptors.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2012  Simon Foster (simon.foster [at] inbox [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Macros: */
-		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 2)
-
-		/** Endpoint address of the CDC device-to-host data IN endpoint. */
-		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
-		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPSIZE        8
-
-		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                16
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t    Config;
-
-			// CDC Command Interface
-			USB_Descriptor_Interface_t               CDC_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
-			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
-
-			// CDC Data Interface
-			USB_Descriptor_Interface_t               CDC_DCI_Interface;
-			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
-			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Lib/HD44780.c b/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Lib/HD44780.c
deleted file mode 100644
index a91e79310b..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Lib/HD44780.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2012  Simon Foster (simon.foster [at] inbox [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-#include "HD44780.h"
-
-static void HD44780_WriteNibble(const uint8_t nib)
-{
-	/* Read PORTD and clear the ENABLE and PD0..3 bits
-	   then OR in the data */
-
-	PORTD = (PORTD & ~(ENABLE | LO4_MASK)) | (nib & LO4_MASK);
-
-	/* Enforce address setup time (tAS) 60ns
-	   60 @ 16MHz = <1
-	   Let's us a few NOPs for good measure */
-	asm volatile("nop\n\t"
-	             "nop\n\t"
-	             :: );
-
-	/* Take enable high and enforce Enable High time (tEH=450ns)
-	   450ns @ 16MHz = 7.2 => 7 NOPs */
-
-	PORTD |= ENABLE;
-
-	asm volatile("nop\n\t"
-	             "nop\n\t"
-	             "nop\n\t"
-	             "nop\n\t"
-	             "nop\n\t"
-	             "nop\n\t"
-	             "nop\n\t"
-	             "nop\n\t"
-	             :: );
-
-	/* Take enable low and enforce Enable Low time (tEL=500ns)
-	   500ns @ 16MHz = 8.0 => 7 NOPs */
-	PORTD &= ~ENABLE;
-
-	asm volatile("nop\n\t"
-	             "nop\n\t"
-	             "nop\n\t"
-	             "nop\n\t"
-	             "nop\n\t"
-	             "nop\n\t"
-	             "nop\n\t"
-	             "nop\n\t"
-	             :: );
-}
-
-static void HD44780_WriteByte(const uint8_t c)
-{
-	HD44780_WriteNibble(HI4(c));
-	HD44780_WriteNibble(LO4(c));
-}
-
-static void HD44780_PowerUp4Bit(void)
-{
-	/* Wait for more than 40 ms after VCC rises to 2.7 V */
-	_delay_ms(40);
-	HD44780_WriteNibble(0x03);        // FN_SET 8-bit
-
-	/* Wait for more than 4.1 ms */
-	_delay_ms(5);
-	HD44780_WriteNibble(0x03);        // FN_SET 8-bit
-
-	/* Wait for more than 100 µs */
-	_delay_us(100);
-	HD44780_WriteNibble(0x03);        // FN_SET 8-bit
-
-	/* From now on we must allow 40us for each command */
-	_delay_us(50);
-	HD44780_WriteNibble(0x02);        // FN_SET 4-bit
-
-	/* The LCD is now in 4-bit mode so we can continue
-	   using the 4-bit API */
-	_delay_us(50);
-}
-
-void HD44780_Initialize(void)
-{
-	PORTD &= ~ALL_BITS;
-	DDRD  |=  ALL_BITS;
-	HD44780_PowerUp4Bit();
-}
-
-void HD44780_WriteCommand(const uint8_t c)
-{
-	PORTD &= ~RS;
-	HD44780_WriteByte(c);
-	_delay_us(50);
-}
-
-void HD44780_WriteData(const uint8_t c)
-{
-	PORTD |=  RS;
-	HD44780_WriteByte(c);
-	PORTD &= ~RS;
-	_delay_us(50);
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Lib/HD44780.h b/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Lib/HD44780.h
deleted file mode 100644
index b6dbe905e0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/Lib/HD44780.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2012  Simon Foster (simon.foster [at] inbox [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for HD44780.c.
- */
-
-#ifndef _HD44780_H_
-#define _HD44780_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <util/delay.h>
-		#include <avr/power.h>
-
-	/* Macros: */
-		#define RS                  (1 << 4)    /* PD4 */
-		#define ENABLE              (1 << 7)    /* PD7 */
-
-		#define HI4_MASK            0xF0
-		#define LO4_MASK            0x0F        /* PD0-PD3 */
-
-		#define ALL_BITS            (RS | ENABLE | LO4_MASK)
-
-		#define HI4(c)              ((c & HI4_MASK) >> 4)
-		#define LO4(c)              ((c & LO4_MASK) >> 0)
-
-		#define CMD_DISPLAY_ON      0x0C
-
-	/* Function Prototypes: */
-		void HD44780_Initialize(void);
-		void HD44780_WriteData(const uint8_t c);
-		void HD44780_WriteCommand(const uint8_t c);
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/SerialToLCD.c b/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/SerialToLCD.c
deleted file mode 100644
index 21588c947a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/SerialToLCD.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2012  Simon Foster (simon.foster [at] inbox [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the SerialToLCD program. This file contains the main tasks of
- *  the project and is responsible for the initial application hardware configuration.
- */
-
-#include "SerialToLCD.h"
-
-/** Circular buffer to hold data from the host before it is sent to the LCD */
-static RingBuffer_t FromHost_Buffer;
-
-/** Underlying data buffer for \ref FromHost_Buffer, where the stored bytes are located. */
-static uint8_t      FromHost_Buffer_Data[128];
-
-/** LUFA CDC Class driver interface configuration and state information. This structure is
- *  passed to all CDC Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
-	{
-		.Config =
-			{
-				.ControlInterfaceNumber   = INTERFACE_ID_CDC_CCI,
-				.DataINEndpoint           =
-					{
-						.Address          = CDC_TX_EPADDR,
-						.Size             = CDC_TXRX_EPSIZE,
-						.Banks            = 1,
-					},
-				.DataOUTEndpoint =
-					{
-						.Address          = CDC_RX_EPADDR,
-						.Size             = CDC_TXRX_EPSIZE,
-						.Banks            = 1,
-					},
-				.NotificationEndpoint =
-					{
-						.Address          = CDC_NOTIFICATION_EPADDR,
-						.Size             = CDC_NOTIFICATION_EPSIZE,
-						.Banks            = 1,
-					},
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	RingBuffer_InitBuffer(&FromHost_Buffer, FromHost_Buffer_Data, sizeof(FromHost_Buffer_Data));
-
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		/* Only try to read in bytes from the CDC interface if the transmit buffer is not full */
-		if (!(RingBuffer_IsFull(&FromHost_Buffer)))
-		{
-			int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
-
-			/* Read bytes from the USB OUT endpoint into the USART transmit buffer */
-			if (!(ReceivedByte < 0))
-			  RingBuffer_Insert(&FromHost_Buffer, ReceivedByte);
-		}
-
-		while (RingBuffer_GetCount(&FromHost_Buffer) > 0)
-		{
-			static uint8_t EscapePending = 0;
-			int16_t HD44780Byte = RingBuffer_Remove(&FromHost_Buffer);
-
-			if (HD44780Byte == COMMAND_ESCAPE)
-			{
-				if (EscapePending)
-				{
-					HD44780_WriteData(HD44780Byte);
-					EscapePending = 0;
-				}
-				else
-				{
-					/* Next received character is the command byte */
-					EscapePending = 1;
-				}
-			}
-			else
-			{
-				if (EscapePending)
-				{
-					HD44780_WriteCommand(HD44780Byte);
-					EscapePending = 0;
-				}
-				else
-				{
-					HD44780_WriteData(HD44780Byte);
-				}
-			}
-		}
-
-		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the application's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	USB_Init();
-
-	/* Power up the HD44780 Interface */
-	HD44780_Initialize();
-	HD44780_WriteCommand(CMD_DISPLAY_ON);
-
-	/* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */
-	TCCR0B = (1 << CS02);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/SerialToLCD.h b/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/SerialToLCD.h
deleted file mode 100644
index 73455b1d40..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/SerialToLCD.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-  Copyright 2012  Simon Foster (simon.foster [at] inbox [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for SerialToLCD.c.
- */
-
-#ifndef _SERIALTOLCD_H_
-#define _SERIALTOLCD_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/interrupt.h>
-		#include <avr/power.h>
-
-		#include "Descriptors.h"
-		#include "Lib/HD44780.h"
-
-		#include <LUFA/Version.h>
-		#include <LUFA/Drivers/Misc/RingBuffer.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		#define COMMAND_ESCAPE     0x1B
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/SerialToLCD.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/SerialToLCD.txt
deleted file mode 100644
index a2f3396489..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/SerialToLCD.txt
+++ /dev/null
@@ -1,109 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Simon Foster's USB Serial to HD44780 LCD Project
- *
- *  \section Sec_Compat Project Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li AT90USB162
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this project.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Firmware for a USB Virtual Serial to HD44780 LCD controller project, by Simon Foster. This
- *  project connects a standard HD7780 compatible LCD controller to a PC via a virtual serial
- *  link, so that data supplied by the host can be written to the display. This project is
- *  designed to use the Minimum USB AVR board, however it can be modified to suit other hardware
- *  if desired.
- *
- *  LCD Datasheet:    http://www.sparkfun.com/datasheets/LCD/HD44780.pdf \n
- *  More Information: http://en.wikipedia.org/wiki/HD44780_Character_LCD \n
- *
- *  Below are the connections between the AVR Minimus board and LCD.
- *
- *  <table>
- *   <tr>
- *    <td><b>AVR Pin:</b></td>
- *    <td><b>HD44780 LCD Pin:</b></td>
- *   </tr>
- *   <tr>
- *    <td>VCC</td>
- *    <td>VCC</td>
- *   </tr>
- *   <tr>
- *    <td>GND</td>
- *    <td>GND</td>
- *   </tr>
- *   <tr>
- *    <td>PD0</td>
- *    <td>DB4</td>
- *   </tr>
- *   <tr>
- *    <td>PD1</td>
- *    <td>DB5</td>
- *   </tr>
- *   <tr>
- *    <td>PD2</td>
- *    <td>DB6</td>
- *   </tr>
- *   <tr>
- *    <td>PD3</td>
- *    <td>DB7</td>
- *   </tr>
- *   <tr>
- *    <td>PD4</td>
- *    <td>/RS</td>
- *   </tr>
- *   <tr>
- *    <td>GND</td>
- *    <td>/RW</td>
- *   </tr>
- *   <tr>
- *    <td>PD7</td>
- *    <td>/E</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/asf.xml
deleted file mode 100644
index 07c2419035..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/asf.xml
+++ /dev/null
@@ -1,50 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="USB Serial to LCD Display" id="lufa.projects.serial_to_lcd.avr8">

-		<require idref="lufa.projects.serial_to_lcd"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.projects.serial_to_lcd" caption="USB Serial to LCD Display">

-		<info type="description" value="summary">

-		USB Serial to LCD Controller project.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="CDC Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="SerialToLCD.txt"/>

-

-		<build type="c-source" value="SerialToLCD.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="SerialToLCD.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="c-source" value="Lib/HD44780.c"/>

-		<build type="header-file" value="Lib/HD44780.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.misc.ringbuffer"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/doxyfile
deleted file mode 100644
index 38ac031ff5..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "Simon Foster's USB Serial to HD44780 LCD Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/makefile
deleted file mode 100644
index b7e6d4211c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/SerialToLCD/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb162
-ARCH         = AVR8
-BOARD        = MINIMUS
-F_CPU        = 16000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = SerialToLCD
-SRC          = $(TARGET).c Descriptors.c Lib/HD44780.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Config/AppConfig.h
deleted file mode 100644
index 5ac7011f0a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Config/AppConfig.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define DUMMY_RTC
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Config/LUFAConfig.h
deleted file mode 100644
index 4d5f58a4ac..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-		#define DEVICE_STATE_AS_GPIOR            0
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              0
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Descriptors.c
deleted file mode 100644
index c5ff3e1468..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Descriptors.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** HID class report descriptor. This is a special descriptor constructed with values from the
- *  USBIF HID class specification to describe the reports and capabilities of the HID device. This
- *  descriptor is parsed by the host and its contents used to determine what data (and in what encoding)
- *  the device will send, and what it may be sent back from the host. Refer to the HID specification for
- *  more details on HID report descriptors.
- */
-const USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] =
-{
-	/* Use the HID class driver's standard Vendor HID report.
-	 *  Vendor Usage Page: 1
-	 *  Vendor Collection Usage: 1
-	 *  Vendor Report IN Usage: 2
-	 *  Vendor Report OUT Usage: 3
-	 *  Vendor Report Size: GENERIC_REPORT_SIZE
-	 */
-	HID_DESCRIPTOR_VENDOR(0x00, 0x01, 0x02, 0x03, GENERIC_REPORT_SIZE)
-};
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_NoDeviceClass,
-	.SubClass               = USB_CSCP_NoDeviceSubclass,
-	.Protocol               = USB_CSCP_NoDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2063,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 2,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.MS_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_MassStorage,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = MS_CSCP_MassStorageClass,
-			.SubClass               = MS_CSCP_SCSITransparentSubclass,
-			.Protocol               = MS_CSCP_BulkOnlyTransportProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.MS_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MASS_STORAGE_IN_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.MS_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MASS_STORAGE_OUT_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.HID_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_HID,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = HID_CSCP_HIDClass,
-			.SubClass               = HID_CSCP_NonBootSubclass,
-			.Protocol               = HID_CSCP_NonBootProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.HID_GenericHID =
-		{
-			.Header                 = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID},
-
-			.HIDSpec                = VERSION_BCD(1,1,1),
-			.CountryCode            = 0x00,
-			.TotalReportDescriptors = 1,
-			.HIDReportType          = HID_DTYPE_Report,
-			.HIDReportLength        = sizeof(GenericReport)
-		},
-
-	.HID_ReportINEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = GENERIC_IN_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = GENERIC_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"Temperature Datalogger");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-		case HID_DTYPE_HID:
-			Address = &ConfigurationDescriptor.HID_GenericHID;
-			Size    = sizeof(USB_HID_Descriptor_HID_t);
-			break;
-		case HID_DTYPE_Report:
-			Address = &GenericReport;
-			Size    = sizeof(GenericReport);
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Descriptors.h
deleted file mode 100644
index 42d4ca2f37..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Descriptors.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "TempDataLogger.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
-		#define MASS_STORAGE_IN_EPADDR         (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */
-		#define MASS_STORAGE_OUT_EPADDR        (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the Mass Storage data endpoints. */
-		#define MASS_STORAGE_IO_EPSIZE         64
-
-		/** Endpoint address of the Generic HID reporting IN endpoint. */
-		#define GENERIC_IN_EPADDR              (ENDPOINT_DIR_IN  | 1)
-
-		/** Size in bytes of the Generic HID reporting endpoint. */
-		#define GENERIC_EPSIZE                 16
-
-		/** Size in bytes of the Generic HID reports (including report ID byte). */
-		#define GENERIC_REPORT_SIZE            sizeof(Device_Report_t)
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t Config;
-
-			// Mass Storage Interface
-			USB_Descriptor_Interface_t            MS_Interface;
-			USB_Descriptor_Endpoint_t             MS_DataInEndpoint;
-			USB_Descriptor_Endpoint_t             MS_DataOutEndpoint;
-
-			// Settings Management Generic HID Interface
-			USB_Descriptor_Interface_t            HID_Interface;
-			USB_HID_Descriptor_HID_t              HID_GenericHID;
-			USB_Descriptor_Endpoint_t             HID_ReportINEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_MassStorage = 0, /**< Mass storage interface descriptor ID */
-			INTERFACE_ID_HID         = 1, /**< HID interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/DataflashManager.c b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/DataflashManager.c
deleted file mode 100644
index d8dc54dad7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/DataflashManager.c
+++ /dev/null
@@ -1,534 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Functions to manage the physical Dataflash media, including reading and writing of
- *  blocks of data. These functions are called by the SCSI layer when data must be stored
- *  or retrieved to/from the physical storage media. If a different media is used (such
- *  as a SD card or EEPROM), functions similar to these will need to be generated.
- */
-
-#define  INCLUDE_FROM_DATAFLASHMANAGER_C
-#include "DataflashManager.h"
-
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
- *  the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes
- *  them to the Dataflash in Dataflash page sized blocks.
- *
- *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
- *  \param[in] BlockAddress  Data block starting address for the write sequence
- *  \param[in] TotalBlocks   Number of blocks of data to write
- */
-void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                  const uint32_t BlockAddress,
-                                  uint16_t TotalBlocks)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-	bool     UsingSecondBuffer   = false;
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the Dataflash buffer */
-	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
-	Dataflash_SendAddressBytes(CurrDFPage, 0);
-	Dataflash_WaitWhileBusy();
-#endif
-
-	/* Send the Dataflash buffer write command */
-	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
-	Dataflash_SendAddressBytes(0, CurrDFPageByte);
-
-	/* Wait until endpoint is ready before continuing */
-	if (Endpoint_WaitUntilReady())
-	  return;
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if the endpoint is currently empty */
-			if (!(Endpoint_IsReadWriteAllowed()))
-			{
-				/* Clear the current endpoint bank */
-				Endpoint_ClearOUT();
-
-				/* Wait until the host has sent another packet */
-				if (Endpoint_WaitUntilReady())
-				  return;
-			}
-
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Write the Dataflash buffer contents back to the Dataflash page */
-				Dataflash_WaitWhileBusy();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
-				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
-				  UsingSecondBuffer = !(UsingSecondBuffer);
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
-				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
-				{
-					/* Copy selected dataflash's current page contents to the Dataflash buffer */
-					Dataflash_WaitWhileBusy();
-					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
-					Dataflash_SendAddressBytes(CurrDFPage, 0);
-					Dataflash_WaitWhileBusy();
-				}
-#endif
-
-				/* Send the Dataflash buffer write command */
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
-				Dataflash_SendAddressBytes(0, 0);
-			}
-
-			/* Write one 16-byte chunk of data to the Dataflash */
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-
-			/* Check if the current command is being aborted by the host */
-			if (MSInterfaceInfo->State.IsMassStoreReset)
-			  return;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Write the Dataflash buffer contents back to the Dataflash page */
-	Dataflash_WaitWhileBusy();
-	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
-	Dataflash_WaitWhileBusy();
-
-	/* If the endpoint is empty, clear it ready for the next packet from the host */
-	if (!(Endpoint_IsReadWriteAllowed()))
-	  Endpoint_ClearOUT();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
- *  the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash
- *  and writes them in OS sized blocks to the endpoint.
- *
- *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
- *  \param[in] BlockAddress  Data block starting address for the read sequence
- *  \param[in] TotalBlocks   Number of blocks of data to read
- */
-void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                 const uint32_t BlockAddress,
-                                 uint16_t TotalBlocks)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-	/* Send the Dataflash main memory page read command */
-	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-
-	/* Wait until endpoint is ready before continuing */
-	if (Endpoint_WaitUntilReady())
-	  return;
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if the endpoint is currently full */
-			if (!(Endpoint_IsReadWriteAllowed()))
-			{
-				/* Clear the endpoint bank to send its contents to the host */
-				Endpoint_ClearIN();
-
-				/* Wait until the endpoint is ready for more data */
-				if (Endpoint_WaitUntilReady())
-				  return;
-			}
-
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-				/* Send the Dataflash main memory page read command */
-				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-			}
-
-			/* Read one 16-byte chunk of data from the Dataflash */
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-
-			/* Check if the current command is being aborted by the host */
-			if (MSInterfaceInfo->State.IsMassStoreReset)
-			  return;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* If the endpoint is full, send its contents to the host */
-	if (!(Endpoint_IsReadWriteAllowed()))
-	  Endpoint_ClearIN();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
- *  the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the
- *  Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
- *  Dataflash.
- *
- *  \param[in] BlockAddress  Data block starting address for the write sequence
- *  \param[in] TotalBlocks   Number of blocks of data to write
- *  \param[in] BufferPtr     Pointer to the data source RAM buffer
- */
-void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
-                                      uint16_t TotalBlocks,
-                                      const uint8_t* BufferPtr)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-	bool     UsingSecondBuffer   = false;
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the Dataflash buffer */
-	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
-	Dataflash_SendAddressBytes(CurrDFPage, 0);
-	Dataflash_WaitWhileBusy();
-#endif
-
-	/* Send the Dataflash buffer write command */
-	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
-	Dataflash_SendAddressBytes(0, CurrDFPageByte);
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Write the Dataflash buffer contents back to the Dataflash page */
-				Dataflash_WaitWhileBusy();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
-				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
-				  UsingSecondBuffer = !(UsingSecondBuffer);
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
-				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
-				{
-					/* Copy selected dataflash's current page contents to the Dataflash buffer */
-					Dataflash_WaitWhileBusy();
-					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
-					Dataflash_SendAddressBytes(CurrDFPage, 0);
-					Dataflash_WaitWhileBusy();
-				}
-#endif
-
-				/* Send the Dataflash buffer write command */
-				Dataflash_ToggleSelectedChipCS();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
-				Dataflash_SendAddressBytes(0, 0);
-			}
-
-			/* Write one 16-byte chunk of data to the Dataflash */
-			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
-			  Dataflash_SendByte(*(BufferPtr++));
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Write the Dataflash buffer contents back to the Dataflash page */
-	Dataflash_WaitWhileBusy();
-	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
-	Dataflash_WaitWhileBusy();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
- *  the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash
- *  and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read
- *  the files stored on the Dataflash.
- *
- *  \param[in] BlockAddress  Data block starting address for the read sequence
- *  \param[in] TotalBlocks   Number of blocks of data to read
- *  \param[out] BufferPtr    Pointer to the data destination RAM buffer
- */
-void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
-                                     uint16_t TotalBlocks,
-                                     uint8_t* BufferPtr)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-	/* Send the Dataflash main memory page read command */
-	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-				/* Send the Dataflash main memory page read command */
-				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-			}
-
-			/* Read one 16-byte chunk of data from the Dataflash */
-			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
-			  *(BufferPtr++) = Dataflash_ReceiveByte();
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
-void DataflashManager_ResetDataflashProtections(void)
-{
-	/* Select first Dataflash chip, send the read status register command */
-	Dataflash_SelectChip(DATAFLASH_CHIP1);
-	Dataflash_SendByte(DF_CMD_GETSTATUS);
-
-	/* Check if sector protection is enabled */
-	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
-	{
-		Dataflash_ToggleSelectedChipCS();
-
-		/* Send the commands to disable sector protection */
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
-	}
-
-	/* Select second Dataflash chip (if present on selected board), send read status register command */
-	#if (DATAFLASH_TOTALCHIPS == 2)
-	Dataflash_SelectChip(DATAFLASH_CHIP2);
-	Dataflash_SendByte(DF_CMD_GETSTATUS);
-
-	/* Check if sector protection is enabled */
-	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
-	{
-		Dataflash_ToggleSelectedChipCS();
-
-		/* Send the commands to disable sector protection */
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
-	}
-	#endif
-
-	/* Deselect current Dataflash chip */
-	Dataflash_DeselectChip();
-}
-
-/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working.
- *
- *  \return Boolean \c true if all media chips are working, \c false otherwise
- */
-bool DataflashManager_CheckDataflashOperation(void)
-{
-	uint8_t ReturnByte;
-
-	/* Test first Dataflash IC is present and responding to commands */
-	Dataflash_SelectChip(DATAFLASH_CHIP1);
-	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
-	ReturnByte = Dataflash_ReceiveByte();
-	Dataflash_DeselectChip();
-
-	/* If returned data is invalid, fail the command */
-	if (ReturnByte != DF_MANUFACTURER_ATMEL)
-	  return false;
-
-	#if (DATAFLASH_TOTALCHIPS == 2)
-	/* Test second Dataflash IC is present and responding to commands */
-	Dataflash_SelectChip(DATAFLASH_CHIP2);
-	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
-	ReturnByte = Dataflash_ReceiveByte();
-	Dataflash_DeselectChip();
-
-	/* If returned data is invalid, fail the command */
-	if (ReturnByte != DF_MANUFACTURER_ATMEL)
-	  return false;
-	#endif
-
-	return true;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/DataflashManager.h b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/DataflashManager.h
deleted file mode 100644
index d93130d3b1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/DataflashManager.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DataflashManager.c.
- */
-
-#ifndef _DATAFLASH_MANAGER_H_
-#define _DATAFLASH_MANAGER_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-
-		#include "../TempDataLogger.h"
-		#include "../Descriptors.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Common/Common.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/Dataflash.h>
-
-	/* Preprocessor Checks: */
-		#if (DATAFLASH_PAGE_SIZE % 16)
-			#error Dataflash page size must be a multiple of 16 bytes.
-		#endif
-
-	/* Defines: */
-		/** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */
-		#define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
-
-		/** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
-		 *  storage media (Dataflash) using a different native block size. Do not change this value.
-		 */
-		#define VIRTUAL_MEMORY_BLOCK_SIZE           512
-
-		/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not
-		 *  change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size.
-		 */
-		#define VIRTUAL_MEMORY_BLOCKS               (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
-
-	/* Function Prototypes: */
-		void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-		                                  const uint32_t BlockAddress,
-		                                  uint16_t TotalBlocks);
-		void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-		                                 const uint32_t BlockAddress,
-		                                 uint16_t TotalBlocks);
-		void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
-		                                      uint16_t TotalBlocks,
-		                                      const uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
-		void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
-		                                     uint16_t TotalBlocks,
-		                                     uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
-		void DataflashManager_ResetDataflashProtections(void);
-		bool DataflashManager_CheckDataflashOperation(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/00readme.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/00readme.txt
deleted file mode 100644
index 80d8843d13..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/00readme.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-FatFs Module Source Files R0.09a                       (C)ChaN, 2012
-
-
-FILES
-
-  ffconf.h   Configuration file for FatFs module.
-  ff.h       Common include file for FatFs and application module.
-  ff.c       FatFs module.
-  diskio.h   Common include file for FatFs and disk I/O module.
-  diskio.c   An example of glue function to attach existing disk I/O module to FatFs.
-  integer.h  Integer type definitions for FatFs.
-  option     Optional external functions.
-
-  Low level disk I/O module is not included in this archive because the FatFs
-  module is only a generic file system layer and not depend on any specific
-  storage device. You have to provide a low level disk I/O module that written
-  to control your storage device.
-
-
-
-AGREEMENTS
-
- FatFs module is an open source software to implement FAT file system to
- small embedded systems. This is a free software and is opened for education,
- research and commercial developments under license policy of following trems.
-
-  Copyright (C) 2012, ChaN, all right reserved.
-
- * The FatFs module is a free software and there is NO WARRANTY.
- * No restriction on use. You can use, modify and redistribute it for
-   personal, non-profit or commercial product UNDER YOUR RESPONSIBILITY.
- * Redistributions of source code must retain the above copyright notice.
-
-
-
-REVISION HISTORY
-
-  Feb 26, 2006  R0.00  Prototype
-
-  Apr 29, 2006  R0.01  First release.
-
-  Jun 01, 2006  R0.02  Added FAT12.
-                       Removed unbuffered mode.
-                       Fixed a problem on small (<32M) patition.
-
-  Jun 10, 2006  R0.02a Added a configuration option _FS_MINIMUM.
-
-  Sep 22, 2006  R0.03  Added f_rename.
-                       Changed option _FS_MINIMUM to _FS_MINIMIZE.
-
-  Dec 11, 2006  R0.03a Improved cluster scan algolithm to write files fast.
-                       Fixed f_mkdir creates incorrect directory on FAT32.
-
-  Feb 04, 2007  R0.04  Supported multiple drive system. (FatFs)
-                       Changed some APIs for multiple drive system.
-                       Added f_mkfs. (FatFs)
-                       Added _USE_FAT32 option. (Tiny-FatFs)
-
-  Apr 01, 2007  R0.04a Supported multiple partitions on a plysical drive. (FatFs)
-                       Fixed an endian sensitive code in f_mkfs. (FatFs)
-                       Added a capability of extending the file size to f_lseek.
-                       Added minimization level 3.
-                       Fixed a problem that can collapse a sector when recreate an
-                       existing file in any sub-directory at non FAT32 cfg. (Tiny-FatFs)
-
-  May 05, 2007  R0.04b Added _USE_NTFLAG option.
-                       Added FSInfo support.
-                       Fixed some problems corresponds to FAT32. (Tiny-FatFs)
-                       Fixed DBCS name can result FR_INVALID_NAME.
-                       Fixed short seek (0 < ofs <= csize) collapses the file object.
-
-  Aug 25, 2007  R0.05  Changed arguments of f_read, f_write.
-                       Changed arguments of f_mkfs. (FatFs)
-                       Fixed f_mkfs on FAT32 creates incorrect FSInfo. (FatFs)
-                       Fixed f_mkdir on FAT32 creates incorrect directory. (FatFs)
-
-  Feb 03, 2008  R0.05a Added f_truncate().
-                       Added f_utime().
-                       Fixed off by one error at FAT sub-type determination.
-                       Fixed btr in f_read() can be mistruncated.
-                       Fixed cached sector is not flushed when create and close without write.
-
-  Apr 01, 2008  R0.06  Added f_forward(). (Tiny-FatFs)
-                       Added string functions: fputc(), fputs(), fprintf() and fgets().
-                       Improved performance of f_lseek() on move to the same or following cluster.
-
-  Apr 01, 2009, R0.07  Merged Tiny-FatFs as a buffer configuration option.
-                       Added long file name support.
-                       Added multiple code page support.
-                       Added re-entrancy for multitask operation.
-                       Added auto cluster size selection to f_mkfs().
-                       Added rewind option to f_readdir().
-                       Changed result code of critical errors.
-                       Renamed string functions to avoid name collision.
-
-  Apr 14, 2009, R0.07a Separated out OS dependent code on reentrant cfg.
-                       Added multiple sector size support.
-
-  Jun 21, 2009, R0.07c Fixed f_unlink() may return FR_OK on error.
-                       Fixed wrong cache control in f_lseek().
-                       Added relative path feature.
-                       Added f_chdir().
-                       Added f_chdrive().
-                       Added proper case conversion for extended characters.
-
-  Nov 03, 2009 R0.07e  Separated out configuration options from ff.h to ffconf.h.
-                       Added a configuration option, _LFN_UNICODE.
-                       Fixed f_unlink() fails to remove a sub-dir on _FS_RPATH.
-                       Fixed name matching error on the 13 char boundary.
-                       Changed f_readdir() to return the SFN with always upper case on non-LFN cfg.
-
-  May 15, 2010, R0.08  Added a memory configuration option. (_USE_LFN)
-                       Added file lock feature. (_FS_SHARE)
-                       Added fast seek feature. (_USE_FASTSEEK)
-                       Changed some types on the API, XCHAR->TCHAR.
-                       Changed fname member in the FILINFO structure on Unicode cfg.
-                       String functions support UTF-8 encoding files on Unicode cfg.
-
-  Aug 16,'10 R0.08a    Added f_getcwd(). (_FS_RPATH = 2)
-                       Added sector erase feature. (_USE_ERASE)
-                       Moved file lock semaphore table from fs object to the bss.
-                       Fixed a wrong directory entry is created on non-LFN cfg when the given name contains ';'.
-                       Fixed f_mkfs() creates wrong FAT32 volume.
-
-  Jan 15,'11 R0.08b    Fast seek feature is also applied to f_read() and f_write().
-                       f_lseek() reports required table size on creating CLMP.
-                       Extended format syntax of f_printf function.
-                       Ignores duplicated directory separators in given path names.
-
-  Sep 06,'11 R0.09     f_mkfs() supports multiple partition to finish the multiple partition feature.
-                       Added f_fdisk(). (_MULTI_PARTITION = 2)
-
-  Aug 27,'12 R0.09a    Fixed assertion failure due to OS/2 EA on FAT12/16.
-                       Changed API rejects null object pointer to avoid crash.
-                       Changed option name _FS_SHARE to _FS_LOCK.
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/diskio.c b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/diskio.c
deleted file mode 100644
index 8cc8cd4049..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/diskio.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*-----------------------------------------------------------------------*/
-/* Low level disk I/O module skeleton for FatFs     (C)ChaN, 2007        */
-/*-----------------------------------------------------------------------*/
-/* This is a stub disk I/O module that acts as front end of the existing */
-/* disk I/O modules and attach it to FatFs module with common interface. */
-/*-----------------------------------------------------------------------*/
-
-#include "diskio.h"
-
-/*-----------------------------------------------------------------------*/
-/* Initialize a Drive                                                    */
-
-DSTATUS disk_initialize (
-	BYTE drv				/* Physical drive number (0..) */
-)
-{
-	return FR_OK;
-}
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Return Disk Status                                                    */
-
-DSTATUS disk_status (
-	BYTE drv		/* Physical drive number (0..) */
-)
-{
-	return FR_OK;
-}
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Read Sector(s)                                                        */
-
-DRESULT disk_read (
-	BYTE drv,		/* Physical drive number (0..) */
-	BYTE *buff,		/* Data buffer to store read data */
-	DWORD sector,	/* Sector address (LBA) */
-	BYTE count		/* Number of sectors to read (1..128) */
-)
-{
-	DataflashManager_ReadBlocks_RAM(sector, count, buff);
-	return RES_OK;
-}
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Write Sector(s)                                                       */
-
-#if _READONLY == 0
-DRESULT disk_write (
-	BYTE drv,			/* Physical drive number (0..) */
-	const BYTE *buff,	/* Data to be written */
-	DWORD sector,		/* Sector address (LBA) */
-	BYTE count			/* Number of sectors to write (1..128) */
-)
-{
-	DataflashManager_WriteBlocks_RAM(sector, count, buff);
-	return RES_OK;
-}
-#endif /* _READONLY */
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Miscellaneous Functions                                               */
-
-DRESULT disk_ioctl (
-	BYTE drv,		/* Physical drive number (0..) */
-	BYTE ctrl,		/* Control code */
-	void *buff		/* Buffer to send/receive control data */
-)
-{
-	if (ctrl == CTRL_SYNC)
-	  return RES_OK;
-	else
-	  return RES_PARERR;
-}
-
-
-DWORD get_fattime (void)
-{
-	TimeDate_t CurrTimeDate;
-
-	RTC_GetTimeDate(&CurrTimeDate);
-
-
-	return ((DWORD)(20 + CurrTimeDate.Year) << 25) |
-	             ((DWORD)CurrTimeDate.Month << 21) |
-	               ((DWORD)CurrTimeDate.Day << 16) |
-	              ((DWORD)CurrTimeDate.Hour << 11) |
-	             ((DWORD)CurrTimeDate.Minute << 5) |
-	      (((DWORD)CurrTimeDate.Second >> 1) << 0);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/diskio.h b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/diskio.h
deleted file mode 100644
index d3c3149a59..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/diskio.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*-----------------------------------------------------------------------
-/  Low level disk interface module include file
-/-----------------------------------------------------------------------*/
-
-#ifndef _DISKIO_DEFINED
-#define _DISKIO_DEFINED
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include "integer.h"
-
-#include "../DataflashManager.h"
-
-
-/* Status of Disk Functions */
-typedef BYTE	DSTATUS;
-
-/* Results of Disk Functions */
-typedef enum {
-	RES_OK = 0,		/* 0: Successful */
-	RES_ERROR,		/* 1: R/W Error */
-	RES_WRPRT,		/* 2: Write Protected */
-	RES_NOTRDY,		/* 3: Not Ready */
-	RES_PARERR		/* 4: Invalid Parameter */
-} DRESULT;
-
-
-/*---------------------------------------*/
-/* Prototypes for disk control functions */
-
-DSTATUS disk_initialize (BYTE);
-DSTATUS disk_status (BYTE);
-DRESULT disk_read (BYTE, BYTE*, DWORD, BYTE);
-#if	_READONLY == 0
-DRESULT disk_write (BYTE, const BYTE*, DWORD, BYTE);
-#endif
-DRESULT disk_ioctl (BYTE, BYTE, void*);
-
-
-/* Disk Status Bits (DSTATUS) */
-
-#define STA_NOINIT		0x01	/* Drive not initialized */
-#define STA_NODISK		0x02	/* No medium in the drive */
-#define STA_PROTECT		0x04	/* Write protected */
-
-/* Generic command */
-#define CTRL_SYNC			0	/* Mandatory for write functions */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/ff.c b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/ff.c
deleted file mode 100644
index 059b5885ae..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/ff.c
+++ /dev/null
@@ -1,4139 +0,0 @@
-/*----------------------------------------------------------------------------/
-/  FatFs - FAT file system module  R0.09a                 (C)ChaN, 2012
-/-----------------------------------------------------------------------------/
-/ FatFs module is a generic FAT file system module for small embedded systems.
-/ This is a free software that opened for education, research and commercial
-/ developments under license policy of following terms.
-/
-/  Copyright (C) 2012, ChaN, all right reserved.
-/
-/ * The FatFs module is a free software and there is NO WARRANTY.
-/ * No restriction on use. You can use, modify and redistribute it for
-/   personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY.
-/ * Redistributions of source code must retain the above copyright notice.
-/
-/-----------------------------------------------------------------------------/
-/ Feb 26,'06 R0.00  Prototype.
-/
-/ Apr 29,'06 R0.01  First stable version.
-/
-/ Jun 01,'06 R0.02  Added FAT12 support.
-/                   Removed unbuffered mode.
-/                   Fixed a problem on small (<32M) partition.
-/ Jun 10,'06 R0.02a Added a configuration option (_FS_MINIMUM).
-/
-/ Sep 22,'06 R0.03  Added f_rename().
-/                   Changed option _FS_MINIMUM to _FS_MINIMIZE.
-/ Dec 11,'06 R0.03a Improved cluster scan algorithm to write files fast.
-/                   Fixed f_mkdir() creates incorrect directory on FAT32.
-/
-/ Feb 04,'07 R0.04  Supported multiple drive system.
-/                   Changed some interfaces for multiple drive system.
-/                   Changed f_mountdrv() to f_mount().
-/                   Added f_mkfs().
-/ Apr 01,'07 R0.04a Supported multiple partitions on a physical drive.
-/                   Added a capability of extending file size to f_lseek().
-/                   Added minimization level 3.
-/                   Fixed an endian sensitive code in f_mkfs().
-/ May 05,'07 R0.04b Added a configuration option _USE_NTFLAG.
-/                   Added FSInfo support.
-/                   Fixed DBCS name can result FR_INVALID_NAME.
-/                   Fixed short seek (<= csize) collapses the file object.
-/
-/ Aug 25,'07 R0.05  Changed arguments of f_read(), f_write() and f_mkfs().
-/                   Fixed f_mkfs() on FAT32 creates incorrect FSInfo.
-/                   Fixed f_mkdir() on FAT32 creates incorrect directory.
-/ Feb 03,'08 R0.05a Added f_truncate() and f_utime().
-/                   Fixed off by one error at FAT sub-type determination.
-/                   Fixed btr in f_read() can be mistruncated.
-/                   Fixed cached sector is not flushed when create and close without write.
-/
-/ Apr 01,'08 R0.06  Added fputc(), fputs(), fprintf() and fgets().
-/                   Improved performance of f_lseek() on moving to the same or following cluster.
-/
-/ Apr 01,'09 R0.07  Merged Tiny-FatFs as a configuration option. (_FS_TINY)
-/                   Added long file name feature.
-/                   Added multiple code page feature.
-/                   Added re-entrancy for multitask operation.
-/                   Added auto cluster size selection to f_mkfs().
-/                   Added rewind option to f_readdir().
-/                   Changed result code of critical errors.
-/                   Renamed string functions to avoid name collision.
-/ Apr 14,'09 R0.07a Separated out OS dependent code on reentrant cfg.
-/                   Added multiple sector size feature.
-/ Jun 21,'09 R0.07c Fixed f_unlink() can return FR_OK on error.
-/                   Fixed wrong cache control in f_lseek().
-/                   Added relative path feature.
-/                   Added f_chdir() and f_chdrive().
-/                   Added proper case conversion to extended char.
-/ Nov 03,'09 R0.07e Separated out configuration options from ff.h to ffconf.h.
-/                   Fixed f_unlink() fails to remove a sub-dir on _FS_RPATH.
-/                   Fixed name matching error on the 13 char boundary.
-/                   Added a configuration option, _LFN_UNICODE.
-/                   Changed f_readdir() to return the SFN with always upper case on non-LFN cfg.
-/
-/ May 15,'10 R0.08  Added a memory configuration option. (_USE_LFN = 3)
-/                   Added file lock feature. (_FS_SHARE)
-/                   Added fast seek feature. (_USE_FASTSEEK)
-/                   Changed some types on the API, XCHAR->TCHAR.
-/                   Changed fname member in the FILINFO structure on Unicode cfg.
-/                   String functions support UTF-8 encoding files on Unicode cfg.
-/ Aug 16,'10 R0.08a Added f_getcwd(). (_FS_RPATH = 2)
-/                   Added sector erase feature. (_USE_ERASE)
-/                   Moved file lock semaphore table from fs object to the bss.
-/                   Fixed a wrong directory entry is created on non-LFN cfg when the given name contains ';'.
-/                   Fixed f_mkfs() creates wrong FAT32 volume.
-/ Jan 15,'11 R0.08b Fast seek feature is also applied to f_read() and f_write().
-/                   f_lseek() reports required table size on creating CLMP.
-/                   Extended format syntax of f_printf function.
-/                   Ignores duplicated directory separators in given path name.
-/
-/ Sep 06,'11 R0.09  f_mkfs() supports multiple partition to finish the multiple partition feature.
-/                   Added f_fdisk(). (_MULTI_PARTITION = 2)
-/ Aug 27,'12 R0.09a Fixed assertion failure due to OS/2 EA on FAT12/16 volume.
-/                   Changed f_open() and f_opendir reject null object pointer to avoid crash.
-/                   Changed option name _FS_SHARE to _FS_LOCK.
-/---------------------------------------------------------------------------*/
-
-#include "ff.h"			/* FatFs configurations and declarations */
-#include "diskio.h"		/* Declarations of low level disk I/O functions */
-
-
-/*--------------------------------------------------------------------------
-
-   Module Private Definitions
-
----------------------------------------------------------------------------*/
-
-#if _FATFS != 4004	/* Revision ID */
-#error Wrong include file (ff.h).
-#endif
-
-
-/* Definitions on sector size */
-#if _MAX_SS != 512 && _MAX_SS != 1024 && _MAX_SS != 2048 && _MAX_SS != 4096
-#error Wrong sector size.
-#endif
-#if _MAX_SS != 512
-#define	SS(fs)	((fs)->ssize)	/* Variable sector size */
-#else
-#define	SS(fs)	512U			/* Fixed sector size */
-#endif
-
-
-/* Reentrancy related */
-#if _FS_REENTRANT
-#if _USE_LFN == 1
-#error Static LFN work area must not be used in re-entrant configuration.
-#endif
-#define	ENTER_FF(fs)		{ if (!lock_fs(fs)) return FR_TIMEOUT; }
-#define	LEAVE_FF(fs, res)	{ unlock_fs(fs, res); return res; }
-#else
-#define	ENTER_FF(fs)
-#define LEAVE_FF(fs, res)	return res
-#endif
-
-#define	ABORT(fs, res)		{ fp->flag |= FA__ERROR; LEAVE_FF(fs, res); }
-
-
-/* File access control feature */
-#if _FS_LOCK
-#if _FS_READONLY
-#error _FS_LOCK must be 0 on read-only cfg.
-#endif
-typedef struct {
-	FATFS *fs;				/* File ID 1, volume (NULL:blank entry) */
-	DWORD clu;				/* File ID 2, directory */
-	WORD idx;				/* File ID 3, directory index */
-	WORD ctr;				/* File open counter, 0:none, 0x01..0xFF:read open count, 0x100:write mode */
-} FILESEM;
-#endif
-
-
-
-/* DBCS code ranges and SBCS extend char conversion table */
-
-#if _CODE_PAGE == 932	/* Japanese Shift-JIS */
-#define _DF1S	0x81	/* DBC 1st byte range 1 start */
-#define _DF1E	0x9F	/* DBC 1st byte range 1 end */
-#define _DF2S	0xE0	/* DBC 1st byte range 2 start */
-#define _DF2E	0xFC	/* DBC 1st byte range 2 end */
-#define _DS1S	0x40	/* DBC 2nd byte range 1 start */
-#define _DS1E	0x7E	/* DBC 2nd byte range 1 end */
-#define _DS2S	0x80	/* DBC 2nd byte range 2 start */
-#define _DS2E	0xFC	/* DBC 2nd byte range 2 end */
-
-#elif _CODE_PAGE == 936	/* Simplified Chinese GBK */
-#define _DF1S	0x81
-#define _DF1E	0xFE
-#define _DS1S	0x40
-#define _DS1E	0x7E
-#define _DS2S	0x80
-#define _DS2E	0xFE
-
-#elif _CODE_PAGE == 949	/* Korean */
-#define _DF1S	0x81
-#define _DF1E	0xFE
-#define _DS1S	0x41
-#define _DS1E	0x5A
-#define _DS2S	0x61
-#define _DS2E	0x7A
-#define _DS3S	0x81
-#define _DS3E	0xFE
-
-#elif _CODE_PAGE == 950	/* Traditional Chinese Big5 */
-#define _DF1S	0x81
-#define _DF1E	0xFE
-#define _DS1S	0x40
-#define _DS1E	0x7E
-#define _DS2S	0xA1
-#define _DS2E	0xFE
-
-#elif _CODE_PAGE == 437	/* U.S. (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x9A,0x90,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F,0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 720	/* Arabic (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x45,0x41,0x84,0x41,0x86,0x43,0x45,0x45,0x45,0x49,0x49,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x49,0x49,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 737	/* Greek (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x96,0x97,0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, \
-				0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0xAA,0x92,0x93,0x94,0x95,0x96,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0x97,0xEA,0xEB,0xEC,0xE4,0xED,0xEE,0xE7,0xE8,0xF1,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 775	/* Baltic (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x9A,0x91,0xA0,0x8E,0x95,0x8F,0x80,0xAD,0xED,0x8A,0x8A,0xA1,0x8D,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0x95,0x96,0x97,0x97,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
-				0xA0,0xA1,0xE0,0xA3,0xA3,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xB5,0xB6,0xB7,0xB8,0xBD,0xBE,0xC6,0xC7,0xA5,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE3,0xE8,0xE8,0xEA,0xEA,0xEE,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 850	/* Multilingual Latin 1 (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
-				0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 852	/* Latin 2 (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xDE,0x8F,0x80,0x9D,0xD3,0x8A,0x8A,0xD7,0x8D,0x8E,0x8F,0x90,0x91,0x91,0xE2,0x99,0x95,0x95,0x97,0x97,0x99,0x9A,0x9B,0x9B,0x9D,0x9E,0x9F, \
-				0xB5,0xD6,0xE0,0xE9,0xA4,0xA4,0xA6,0xA6,0xA8,0xA8,0xAA,0x8D,0xAC,0xB8,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBD,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC6,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD2,0xD5,0xD6,0xD7,0xB7,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE3,0xD5,0xE6,0xE6,0xE8,0xE9,0xE8,0xEB,0xED,0xED,0xDD,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xEB,0xFC,0xFC,0xFE,0xFF}
-
-#elif _CODE_PAGE == 855	/* Cyrillic (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x81,0x81,0x83,0x83,0x85,0x85,0x87,0x87,0x89,0x89,0x8B,0x8B,0x8D,0x8D,0x8F,0x8F,0x91,0x91,0x93,0x93,0x95,0x95,0x97,0x97,0x99,0x99,0x9B,0x9B,0x9D,0x9D,0x9F,0x9F, \
-				0xA1,0xA1,0xA3,0xA3,0xA5,0xA5,0xA7,0xA7,0xA9,0xA9,0xAB,0xAB,0xAD,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB6,0xB6,0xB8,0xB8,0xB9,0xBA,0xBB,0xBC,0xBE,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD3,0xD3,0xD5,0xD5,0xD7,0xD7,0xDD,0xD9,0xDA,0xDB,0xDC,0xDD,0xE0,0xDF, \
-				0xE0,0xE2,0xE2,0xE4,0xE4,0xE6,0xE6,0xE8,0xE8,0xEA,0xEA,0xEC,0xEC,0xEE,0xEE,0xEF,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF8,0xFA,0xFA,0xFC,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 857	/* Turkish (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0x98,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x98,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9E, \
-				0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA6,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xDE,0x59,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 858	/* Multilingual Latin 1 + Euro (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
-				0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 862	/* Hebrew (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 866	/* Russian (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0x90,0x91,0x92,0x93,0x9d,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F,0xF0,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 874	/* Thai (OEM, Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 1250 /* Central Europe (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \
-				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xA3,0xB4,0xB5,0xB6,0xB7,0xB8,0xA5,0xAA,0xBB,0xBC,0xBD,0xBC,0xAF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF}
-
-#elif _CODE_PAGE == 1251 /* Cyrillic (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x82,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x80,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \
-				0xA0,0xA2,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB2,0xA5,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xA3,0xBD,0xBD,0xAF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF}
-
-#elif _CODE_PAGE == 1252 /* Latin 1 (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0xAd,0x9B,0x8C,0x9D,0xAE,0x9F, \
-				0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F}
-
-#elif _CODE_PAGE == 1253 /* Greek (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xA2,0xB8,0xB9,0xBA, \
-				0xE0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xFB,0xBC,0xFD,0xBF,0xFF}
-
-#elif _CODE_PAGE == 1254 /* Turkish (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x9D,0x9E,0x9F, \
-				0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F}
-
-#elif _CODE_PAGE == 1255 /* Hebrew (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 1256 /* Arabic (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x8C,0x9D,0x9E,0x9F, \
-				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0x41,0xE1,0x41,0xE3,0xE4,0xE5,0xE6,0x43,0x45,0x45,0x45,0x45,0xEC,0xED,0x49,0x49,0xF0,0xF1,0xF2,0xF3,0x4F,0xF5,0xF6,0xF7,0xF8,0x55,0xFA,0x55,0x55,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 1257 /* Baltic (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xBC,0xBD,0xBE,0xAF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF}
-
-#elif _CODE_PAGE == 1258 /* Vietnam (OEM, Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0xAC,0x9D,0x9E,0x9F, \
-				0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xEC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xFE,0x9F}
-
-#elif _CODE_PAGE == 1	/* ASCII (for only non-LFN cfg) */
-#if _USE_LFN
-#error Cannot use LFN feature without valid code page.
-#endif
-#define _DF1S	0
-
-#else
-#error Unknown code page
-
-#endif
-
-
-/* Character code support macros */
-#define IsUpper(c)	(((c)>='A')&&((c)<='Z'))
-#define IsLower(c)	(((c)>='a')&&((c)<='z'))
-#define IsDigit(c)	(((c)>='0')&&((c)<='9'))
-
-#if _DF1S		/* Code page is DBCS */
-
-#ifdef _DF2S	/* Two 1st byte areas */
-#define IsDBCS1(c)	(((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) || ((BYTE)(c) >= _DF2S && (BYTE)(c) <= _DF2E))
-#else			/* One 1st byte area */
-#define IsDBCS1(c)	((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E)
-#endif
-
-#ifdef _DS3S	/* Three 2nd byte areas */
-#define IsDBCS2(c)	(((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E) || ((BYTE)(c) >= _DS3S && (BYTE)(c) <= _DS3E))
-#else			/* Two 2nd byte areas */
-#define IsDBCS2(c)	(((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E))
-#endif
-
-#else			/* Code page is SBCS */
-
-#define IsDBCS1(c)	0
-#define IsDBCS2(c)	0
-
-#endif /* _DF1S */
-
-
-/* Name status flags */
-#define NS			11		/* Index of name status byte in fn[] */
-#define NS_LOSS		0x01	/* Out of 8.3 format */
-#define NS_LFN		0x02	/* Force to create LFN entry */
-#define NS_LAST		0x04	/* Last segment */
-#define NS_BODY		0x08	/* Lower case flag (body) */
-#define NS_EXT		0x10	/* Lower case flag (ext) */
-#define NS_DOT		0x20	/* Dot entry */
-
-
-/* FAT sub-type boundaries */
-/* Note that the FAT spec by Microsoft says 4085 but Windows works with 4087! */
-#define MIN_FAT16	4086	/* Minimum number of clusters for FAT16 */
-#define	MIN_FAT32	65526	/* Minimum number of clusters for FAT32 */
-
-
-/* FatFs refers the members in the FAT structures as byte array instead of
-/ structure member because the structure is not binary compatible between
-/ different platforms */
-
-#define BS_jmpBoot			0	/* Jump instruction (3) */
-#define BS_OEMName			3	/* OEM name (8) */
-#define BPB_BytsPerSec		11	/* Sector size [byte] (2) */
-#define BPB_SecPerClus		13	/* Cluster size [sector] (1) */
-#define BPB_RsvdSecCnt		14	/* Size of reserved area [sector] (2) */
-#define BPB_NumFATs			16	/* Number of FAT copies (1) */
-#define BPB_RootEntCnt		17	/* Number of root dir entries for FAT12/16 (2) */
-#define BPB_TotSec16		19	/* Volume size [sector] (2) */
-#define BPB_Media			21	/* Media descriptor (1) */
-#define BPB_FATSz16			22	/* FAT size [sector] (2) */
-#define BPB_SecPerTrk		24	/* Track size [sector] (2) */
-#define BPB_NumHeads		26	/* Number of heads (2) */
-#define BPB_HiddSec			28	/* Number of special hidden sectors (4) */
-#define BPB_TotSec32		32	/* Volume size [sector] (4) */
-#define BS_DrvNum			36	/* Physical drive number (2) */
-#define BS_BootSig			38	/* Extended boot signature (1) */
-#define BS_VolID			39	/* Volume serial number (4) */
-#define BS_VolLab			43	/* Volume label (8) */
-#define BS_FilSysType		54	/* File system type (1) */
-#define BPB_FATSz32			36	/* FAT size [sector] (4) */
-#define BPB_ExtFlags		40	/* Extended flags (2) */
-#define BPB_FSVer			42	/* File system version (2) */
-#define BPB_RootClus		44	/* Root dir first cluster (4) */
-#define BPB_FSInfo			48	/* Offset of FSInfo sector (2) */
-#define BPB_BkBootSec		50	/* Offset of backup boot sector (2) */
-#define BS_DrvNum32			64	/* Physical drive number (2) */
-#define BS_BootSig32		66	/* Extended boot signature (1) */
-#define BS_VolID32			67	/* Volume serial number (4) */
-#define BS_VolLab32			71	/* Volume label (8) */
-#define BS_FilSysType32		82	/* File system type (1) */
-#define	FSI_LeadSig			0	/* FSI: Leading signature (4) */
-#define	FSI_StrucSig		484	/* FSI: Structure signature (4) */
-#define	FSI_Free_Count		488	/* FSI: Number of free clusters (4) */
-#define	FSI_Nxt_Free		492	/* FSI: Last allocated cluster (4) */
-#define MBR_Table			446	/* MBR: Partition table offset (2) */
-#define	SZ_PTE				16	/* MBR: Size of a partition table entry */
-#define BS_55AA				510	/* Boot sector signature (2) */
-
-#define	DIR_Name			0	/* Short file name (11) */
-#define	DIR_Attr			11	/* Attribute (1) */
-#define	DIR_NTres			12	/* NT flag (1) */
-#define DIR_CrtTimeTenth	13	/* Created time sub-second (1) */
-#define	DIR_CrtTime			14	/* Created time (2) */
-#define	DIR_CrtDate			16	/* Created date (2) */
-#define DIR_LstAccDate		18	/* Last accessed date (2) */
-#define	DIR_FstClusHI		20	/* Higher 16-bit of first cluster (2) */
-#define	DIR_WrtTime			22	/* Modified time (2) */
-#define	DIR_WrtDate			24	/* Modified date (2) */
-#define	DIR_FstClusLO		26	/* Lower 16-bit of first cluster (2) */
-#define	DIR_FileSize		28	/* File size (4) */
-#define	LDIR_Ord			0	/* LFN entry order and LLE flag (1) */
-#define	LDIR_Attr			11	/* LFN attribute (1) */
-#define	LDIR_Type			12	/* LFN type (1) */
-#define	LDIR_Chksum			13	/* Sum of corresponding SFN entry */
-#define	LDIR_FstClusLO		26	/* Filled by zero (0) */
-#define	SZ_DIR				32		/* Size of a directory entry */
-#define	LLE					0x40	/* Last long entry flag in LDIR_Ord */
-#define	DDE					0xE5	/* Deleted directory entry mark in DIR_Name[0] */
-#define	NDDE				0x05	/* Replacement of the character collides with DDE */
-
-
-/*------------------------------------------------------------*/
-/* Module private work area                                   */
-/*------------------------------------------------------------*/
-/* Note that uninitialized variables with static duration are
-/  zeroed/nulled at start-up. If not, the compiler or start-up
-/  routine is out of ANSI-C standard.
-*/
-
-#if _VOLUMES
-static
-FATFS *FatFs[_VOLUMES];	/* Pointer to the file system objects (logical drives) */
-#else
-#error Number of volumes must not be 0.
-#endif
-
-static
-WORD Fsid;				/* File system mount ID */
-
-#if _FS_RPATH
-static
-BYTE CurrVol;			/* Current drive */
-#endif
-
-#if _FS_LOCK
-static
-FILESEM	Files[_FS_LOCK];	/* File lock semaphores */
-#endif
-
-#if _USE_LFN == 0			/* No LFN feature */
-#define	DEF_NAMEBUF			BYTE sfn[12]
-#define INIT_BUF(dobj)		(dobj).fn = sfn
-#define	FREE_BUF()
-
-#elif _USE_LFN == 1			/* LFN feature with static working buffer */
-static WCHAR LfnBuf[_MAX_LFN+1];
-#define	DEF_NAMEBUF			BYTE sfn[12]
-#define INIT_BUF(dobj)		{ (dobj).fn = sfn; (dobj).lfn = LfnBuf; }
-#define	FREE_BUF()
-
-#elif _USE_LFN == 2 		/* LFN feature with dynamic working buffer on the stack */
-#define	DEF_NAMEBUF			BYTE sfn[12]; WCHAR lbuf[_MAX_LFN+1]
-#define INIT_BUF(dobj)		{ (dobj).fn = sfn; (dobj).lfn = lbuf; }
-#define	FREE_BUF()
-
-#elif _USE_LFN == 3 		/* LFN feature with dynamic working buffer on the heap */
-#define	DEF_NAMEBUF			BYTE sfn[12]; WCHAR *lfn
-#define INIT_BUF(dobj)		{ lfn = ff_memalloc((_MAX_LFN + 1) * 2); \
-							  if (!lfn) LEAVE_FF((dobj).fs, FR_NOT_ENOUGH_CORE); \
-							  (dobj).lfn = lfn;	(dobj).fn = sfn; }
-#define	FREE_BUF()			ff_memfree(lfn)
-
-#else
-#error Wrong LFN configuration.
-#endif
-
-
-
-
-/*--------------------------------------------------------------------------
-
-   Module Private Functions
-
----------------------------------------------------------------------------*/
-
-
-/*-----------------------------------------------------------------------*/
-/* String functions                                                      */
-/*-----------------------------------------------------------------------*/
-
-/* Copy memory to memory */
-static
-void mem_cpy (void* dst, const void* src, UINT cnt) {
-	BYTE *d = (BYTE*)dst;
-	const BYTE *s = (const BYTE*)src;
-
-#if _WORD_ACCESS == 1
-	while (cnt >= sizeof (int)) {
-		*(int*)d = *(int*)s;
-		d += sizeof (int); s += sizeof (int);
-		cnt -= sizeof (int);
-	}
-#endif
-	while (cnt--)
-		*d++ = *s++;
-}
-
-/* Fill memory */
-static
-void mem_set (void* dst, int val, UINT cnt) {
-	BYTE *d = (BYTE*)dst;
-
-	while (cnt--)
-		*d++ = (BYTE)val;
-}
-
-/* Compare memory to memory */
-static
-int mem_cmp (const void* dst, const void* src, UINT cnt) {
-	const BYTE *d = (const BYTE *)dst, *s = (const BYTE *)src;
-	int r = 0;
-
-	while (cnt-- && (r = *d++ - *s++) == 0) ;
-	return r;
-}
-
-/* Check if chr is contained in the string */
-static
-int chk_chr (const char* str, int chr) {
-	while (*str && *str != chr) str++;
-	return *str;
-}
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Request/Release grant to access the volume                            */
-/*-----------------------------------------------------------------------*/
-#if _FS_REENTRANT
-
-static
-int lock_fs (
-	FATFS *fs		/* File system object */
-)
-{
-	return ff_req_grant(fs->sobj);
-}
-
-
-static
-void unlock_fs (
-	FATFS *fs,		/* File system object */
-	FRESULT res		/* Result code to be returned */
-)
-{
-	if (fs &&
-		res != FR_NOT_ENABLED &&
-		res != FR_INVALID_DRIVE &&
-		res != FR_INVALID_OBJECT &&
-		res != FR_TIMEOUT) {
-		ff_rel_grant(fs->sobj);
-	}
-}
-#endif
-
-
-
-/*-----------------------------------------------------------------------*/
-/* File lock control functions                                           */
-/*-----------------------------------------------------------------------*/
-#if _FS_LOCK
-
-static
-FRESULT chk_lock (	/* Check if the file can be accessed */
-	DIR* dj,		/* Directory object pointing the file to be checked */
-	int acc			/* Desired access (0:Read, 1:Write, 2:Delete/Rename) */
-)
-{
-	UINT i, be;
-
-	/* Search file semaphore table */
-	for (i = be = 0; i < _FS_LOCK; i++) {
-		if (Files[i].fs) {	/* Existing entry */
-			if (Files[i].fs == dj->fs &&	 	/* Check if the file matched with an open file */
-				Files[i].clu == dj->sclust &&
-				Files[i].idx == dj->index) break;
-		} else {			/* Blank entry */
-			be++;
-		}
-	}
-	if (i == _FS_LOCK)	/* The file is not opened */
-		return (be || acc == 2) ? FR_OK : FR_TOO_MANY_OPEN_FILES;	/* Is there a blank entry for new file? */
-
-	/* The file has been opened. Reject any open against writing file and all write mode open */
-	return (acc || Files[i].ctr == 0x100) ? FR_LOCKED : FR_OK;
-}
-
-
-static
-int enq_lock (void)	/* Check if an entry is available for a new file */
-{
-	UINT i;
-
-	for (i = 0; i < _FS_LOCK && Files[i].fs; i++) ;
-	return (i == _FS_LOCK) ? 0 : 1;
-}
-
-
-static
-UINT inc_lock (	/* Increment file open counter and returns its index (0:int error) */
-	DIR* dj,	/* Directory object pointing the file to register or increment */
-	int acc		/* Desired access mode (0:Read, !0:Write) */
-)
-{
-	UINT i;
-
-
-	for (i = 0; i < _FS_LOCK; i++) {	/* Find the file */
-		if (Files[i].fs == dj->fs &&
-			Files[i].clu == dj->sclust &&
-			Files[i].idx == dj->index) break;
-	}
-
-	if (i == _FS_LOCK) {				/* Not opened. Register it as new. */
-		for (i = 0; i < _FS_LOCK && Files[i].fs; i++) ;
-		if (i == _FS_LOCK) return 0;	/* No space to register (int err) */
-		Files[i].fs = dj->fs;
-		Files[i].clu = dj->sclust;
-		Files[i].idx = dj->index;
-		Files[i].ctr = 0;
-	}
-
-	if (acc && Files[i].ctr) return 0;	/* Access violation (int err) */
-
-	Files[i].ctr = acc ? 0x100 : Files[i].ctr + 1;	/* Set semaphore value */
-
-	return i + 1;
-}
-
-
-static
-FRESULT dec_lock (	/* Decrement file open counter */
-	UINT i			/* Semaphore index */
-)
-{
-	WORD n;
-	FRESULT res;
-
-
-	if (--i < _FS_LOCK) {
-		n = Files[i].ctr;
-		if (n == 0x100) n = 0;
-		if (n) n--;
-		Files[i].ctr = n;
-		if (!n) Files[i].fs = 0;
-		res = FR_OK;
-	} else {
-		res = FR_INT_ERR;
-	}
-	return res;
-}
-
-
-static
-void clear_lock (	/* Clear lock entries of the volume */
-	FATFS *fs
-)
-{
-	UINT i;
-
-	for (i = 0; i < _FS_LOCK; i++) {
-		if (Files[i].fs == fs) Files[i].fs = 0;
-	}
-}
-#endif
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Change window offset                                                  */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT move_window (
-	FATFS *fs,		/* File system object */
-	DWORD sector	/* Sector number to make appearance in the fs->win[] */
-)					/* Move to zero only writes back dirty window */
-{
-	DWORD wsect;
-
-
-	wsect = fs->winsect;
-	if (wsect != sector) {	/* Changed current window */
-#if !_FS_READONLY
-		if (fs->wflag) {	/* Write back dirty window if needed */
-			if (disk_write(fs->drv, fs->win, wsect, 1) != RES_OK)
-				return FR_DISK_ERR;
-			fs->wflag = 0;
-			if (wsect < (fs->fatbase + fs->fsize)) {	/* In FAT area */
-				BYTE nf;
-				for (nf = fs->n_fats; nf > 1; nf--) {	/* Reflect the change to all FAT copies */
-					wsect += fs->fsize;
-					disk_write(fs->drv, fs->win, wsect, 1);
-				}
-			}
-		}
-#endif
-		if (sector) {
-			if (disk_read(fs->drv, fs->win, sector, 1) != RES_OK)
-				return FR_DISK_ERR;
-			fs->winsect = sector;
-		}
-	}
-
-	return FR_OK;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Clean-up cached data                                                  */
-/*-----------------------------------------------------------------------*/
-#if !_FS_READONLY
-static
-FRESULT sync (	/* FR_OK: successful, FR_DISK_ERR: failed */
-	FATFS *fs	/* File system object */
-)
-{
-	FRESULT res;
-
-
-	res = move_window(fs, 0);
-	if (res == FR_OK) {
-		/* Update FSInfo sector if needed */
-		if (fs->fs_type == FS_FAT32 && fs->fsi_flag) {
-			fs->winsect = 0;
-			/* Create FSInfo structure */
-			mem_set(fs->win, 0, 512);
-			ST_WORD(fs->win+BS_55AA, 0xAA55);
-			ST_DWORD(fs->win+FSI_LeadSig, 0x41615252);
-			ST_DWORD(fs->win+FSI_StrucSig, 0x61417272);
-			ST_DWORD(fs->win+FSI_Free_Count, fs->free_clust);
-			ST_DWORD(fs->win+FSI_Nxt_Free, fs->last_clust);
-			/* Write it into the FSInfo sector */
-			disk_write(fs->drv, fs->win, fs->fsi_sector, 1);
-			fs->fsi_flag = 0;
-		}
-		/* Make sure that no pending write process in the physical drive */
-		if (disk_ioctl(fs->drv, CTRL_SYNC, 0) != RES_OK)
-			res = FR_DISK_ERR;
-	}
-
-	return res;
-}
-#endif
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Get sector# from cluster#                                             */
-/*-----------------------------------------------------------------------*/
-
-
-DWORD clust2sect (	/* !=0: Sector number, 0: Failed - invalid cluster# */
-	FATFS *fs,		/* File system object */
-	DWORD clst		/* Cluster# to be converted */
-)
-{
-	clst -= 2;
-	if (clst >= (fs->n_fatent - 2)) return 0;		/* Invalid cluster# */
-	return clst * fs->csize + fs->database;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* FAT access - Read value of a FAT entry                                */
-/*-----------------------------------------------------------------------*/
-
-
-DWORD get_fat (	/* 0xFFFFFFFF:Disk error, 1:Internal error, Else:Cluster status */
-	FATFS *fs,	/* File system object */
-	DWORD clst	/* Cluster# to get the link information */
-)
-{
-	UINT wc, bc;
-	BYTE *p;
-
-
-	if (clst < 2 || clst >= fs->n_fatent)	/* Check range */
-		return 1;
-
-	switch (fs->fs_type) {
-	case FS_FAT12 :
-		bc = (UINT)clst; bc += bc / 2;
-		if (move_window(fs, fs->fatbase + (bc / SS(fs)))) break;
-		wc = fs->win[bc % SS(fs)]; bc++;
-		if (move_window(fs, fs->fatbase + (bc / SS(fs)))) break;
-		wc |= fs->win[bc % SS(fs)] << 8;
-		return (clst & 1) ? (wc >> 4) : (wc & 0xFFF);
-
-	case FS_FAT16 :
-		if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 2)))) break;
-		p = &fs->win[clst * 2 % SS(fs)];
-		return LD_WORD(p);
-
-	case FS_FAT32 :
-		if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 4)))) break;
-		p = &fs->win[clst * 4 % SS(fs)];
-		return LD_DWORD(p) & 0x0FFFFFFF;
-	}
-
-	return 0xFFFFFFFF;	/* An error occurred at the disk I/O layer */
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* FAT access - Change value of a FAT entry                              */
-/*-----------------------------------------------------------------------*/
-#if !_FS_READONLY
-
-FRESULT put_fat (
-	FATFS *fs,	/* File system object */
-	DWORD clst,	/* Cluster# to be changed in range of 2 to fs->n_fatent - 1 */
-	DWORD val	/* New value to mark the cluster */
-)
-{
-	UINT bc;
-	BYTE *p;
-	FRESULT res;
-
-
-	if (clst < 2 || clst >= fs->n_fatent) {	/* Check range */
-		res = FR_INT_ERR;
-
-	} else {
-		switch (fs->fs_type) {
-		case FS_FAT12 :
-			bc = (UINT)clst; bc += bc / 2;
-			res = move_window(fs, fs->fatbase + (bc / SS(fs)));
-			if (res != FR_OK) break;
-			p = &fs->win[bc % SS(fs)];
-			*p = (clst & 1) ? ((*p & 0x0F) | ((BYTE)val << 4)) : (BYTE)val;
-			bc++;
-			fs->wflag = 1;
-			res = move_window(fs, fs->fatbase + (bc / SS(fs)));
-			if (res != FR_OK) break;
-			p = &fs->win[bc % SS(fs)];
-			*p = (clst & 1) ? (BYTE)(val >> 4) : ((*p & 0xF0) | ((BYTE)(val >> 8) & 0x0F));
-			break;
-
-		case FS_FAT16 :
-			res = move_window(fs, fs->fatbase + (clst / (SS(fs) / 2)));
-			if (res != FR_OK) break;
-			p = &fs->win[clst * 2 % SS(fs)];
-			ST_WORD(p, (WORD)val);
-			break;
-
-		case FS_FAT32 :
-			res = move_window(fs, fs->fatbase + (clst / (SS(fs) / 4)));
-			if (res != FR_OK) break;
-			p = &fs->win[clst * 4 % SS(fs)];
-			val |= LD_DWORD(p) & 0xF0000000;
-			ST_DWORD(p, val);
-			break;
-
-		default :
-			res = FR_INT_ERR;
-		}
-		fs->wflag = 1;
-	}
-
-	return res;
-}
-#endif /* !_FS_READONLY */
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* FAT handling - Remove a cluster chain                                 */
-/*-----------------------------------------------------------------------*/
-#if !_FS_READONLY
-static
-FRESULT remove_chain (
-	FATFS *fs,			/* File system object */
-	DWORD clst			/* Cluster# to remove a chain from */
-)
-{
-	FRESULT res;
-	DWORD nxt;
-#if _USE_ERASE
-	DWORD scl = clst, ecl = clst, rt[2];
-#endif
-
-	if (clst < 2 || clst >= fs->n_fatent) {	/* Check range */
-		res = FR_INT_ERR;
-
-	} else {
-		res = FR_OK;
-		while (clst < fs->n_fatent) {			/* Not a last link? */
-			nxt = get_fat(fs, clst);			/* Get cluster status */
-			if (nxt == 0) break;				/* Empty cluster? */
-			if (nxt == 1) { res = FR_INT_ERR; break; }	/* Internal error? */
-			if (nxt == 0xFFFFFFFF) { res = FR_DISK_ERR; break; }	/* Disk error? */
-			res = put_fat(fs, clst, 0);			/* Mark the cluster "empty" */
-			if (res != FR_OK) break;
-			if (fs->free_clust != 0xFFFFFFFF) {	/* Update FSInfo */
-				fs->free_clust++;
-				fs->fsi_flag = 1;
-			}
-#if _USE_ERASE
-			if (ecl + 1 == nxt) {	/* Is next cluster contiguous? */
-				ecl = nxt;
-			} else {				/* End of contiguous clusters */ 
-				rt[0] = clust2sect(fs, scl);					/* Start sector */
-				rt[1] = clust2sect(fs, ecl) + fs->csize - 1;	/* End sector */
-				disk_ioctl(fs->drv, CTRL_ERASE_SECTOR, rt);		/* Erase the block */
-				scl = ecl = nxt;
-			}
-#endif
-			clst = nxt;	/* Next cluster */
-		}
-	}
-
-	return res;
-}
-#endif
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* FAT handling - Stretch or Create a cluster chain                      */
-/*-----------------------------------------------------------------------*/
-#if !_FS_READONLY
-static
-DWORD create_chain (	/* 0:No free cluster, 1:Internal error, 0xFFFFFFFF:Disk error, >=2:New cluster# */
-	FATFS *fs,			/* File system object */
-	DWORD clst			/* Cluster# to stretch. 0 means create a new chain. */
-)
-{
-	DWORD cs, ncl, scl;
-	FRESULT res;
-
-
-	if (clst == 0) {		/* Create a new chain */
-		scl = fs->last_clust;			/* Get suggested start point */
-		if (!scl || scl >= fs->n_fatent) scl = 1;
-	}
-	else {					/* Stretch the current chain */
-		cs = get_fat(fs, clst);			/* Check the cluster status */
-		if (cs < 2) return 1;			/* It is an invalid cluster */
-		if (cs < fs->n_fatent) return cs;	/* It is already followed by next cluster */
-		scl = clst;
-	}
-
-	ncl = scl;				/* Start cluster */
-	for (;;) {
-		ncl++;							/* Next cluster */
-		if (ncl >= fs->n_fatent) {		/* Wrap around */
-			ncl = 2;
-			if (ncl > scl) return 0;	/* No free cluster */
-		}
-		cs = get_fat(fs, ncl);			/* Get the cluster status */
-		if (cs == 0) break;				/* Found a free cluster */
-		if (cs == 0xFFFFFFFF || cs == 1)/* An error occurred */
-			return cs;
-		if (ncl == scl) return 0;		/* No free cluster */
-	}
-
-	res = put_fat(fs, ncl, 0x0FFFFFFF);	/* Mark the new cluster "last link" */
-	if (res == FR_OK && clst != 0) {
-		res = put_fat(fs, clst, ncl);	/* Link it to the previous one if needed */
-	}
-	if (res == FR_OK) {
-		fs->last_clust = ncl;			/* Update FSINFO */
-		if (fs->free_clust != 0xFFFFFFFF) {
-			fs->free_clust--;
-			fs->fsi_flag = 1;
-		}
-	} else {
-		ncl = (res == FR_DISK_ERR) ? 0xFFFFFFFF : 1;
-	}
-
-	return ncl;		/* Return new cluster number or error code */
-}
-#endif /* !_FS_READONLY */
-
-
-
-/*-----------------------------------------------------------------------*/
-/* FAT handling - Convert offset into cluster with link map table        */
-/*-----------------------------------------------------------------------*/
-
-#if _USE_FASTSEEK
-static
-DWORD clmt_clust (	/* <2:Error, >=2:Cluster number */
-	FIL* fp,		/* Pointer to the file object */
-	DWORD ofs		/* File offset to be converted to cluster# */
-)
-{
-	DWORD cl, ncl, *tbl;
-
-
-	tbl = fp->cltbl + 1;	/* Top of CLMT */
-	cl = ofs / SS(fp->fs) / fp->fs->csize;	/* Cluster order from top of the file */
-	for (;;) {
-		ncl = *tbl++;			/* Number of cluters in the fragment */
-		if (!ncl) return 0;		/* End of table? (error) */
-		if (cl < ncl) break;	/* In this fragment? */
-		cl -= ncl; tbl++;		/* Next fragment */
-	}
-	return cl + *tbl;	/* Return the cluster number */
-}
-#endif	/* _USE_FASTSEEK */
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Directory handling - Set directory index                              */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT dir_sdi (
-	DIR *dj,		/* Pointer to directory object */
-	WORD idx		/* Index of directory table */
-)
-{
-	DWORD clst;
-	WORD ic;
-
-
-	dj->index = idx;
-	clst = dj->sclust;
-	if (clst == 1 || clst >= dj->fs->n_fatent)	/* Check start cluster range */
-		return FR_INT_ERR;
-	if (!clst && dj->fs->fs_type == FS_FAT32)	/* Replace cluster# 0 with root cluster# if in FAT32 */
-		clst = dj->fs->dirbase;
-
-	if (clst == 0) {	/* Static table (root-dir in FAT12/16) */
-		dj->clust = clst;
-		if (idx >= dj->fs->n_rootdir)		/* Index is out of range */
-			return FR_INT_ERR;
-		dj->sect = dj->fs->dirbase + idx / (SS(dj->fs) / SZ_DIR);	/* Sector# */
-	}
-	else {				/* Dynamic table (sub-dirs or root-dir in FAT32) */
-		ic = SS(dj->fs) / SZ_DIR * dj->fs->csize;	/* Entries per cluster */
-		while (idx >= ic) {	/* Follow cluster chain */
-			clst = get_fat(dj->fs, clst);				/* Get next cluster */
-			if (clst == 0xFFFFFFFF) return FR_DISK_ERR;	/* Disk error */
-			if (clst < 2 || clst >= dj->fs->n_fatent)	/* Reached to end of table or int error */
-				return FR_INT_ERR;
-			idx -= ic;
-		}
-		dj->clust = clst;
-		dj->sect = clust2sect(dj->fs, clst) + idx / (SS(dj->fs) / SZ_DIR);	/* Sector# */
-	}
-
-	dj->dir = dj->fs->win + (idx % (SS(dj->fs) / SZ_DIR)) * SZ_DIR;	/* Ptr to the entry in the sector */
-
-	return FR_OK;	/* Seek succeeded */
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Directory handling - Move directory table index next                  */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT dir_next (	/* FR_OK:Succeeded, FR_NO_FILE:End of table, FR_DENIED:EOT and could not stretch */
-	DIR *dj,		/* Pointer to directory object */
-	int stretch		/* 0: Do not stretch table, 1: Stretch table if needed */
-)
-{
-	DWORD clst;
-	WORD i;
-
-
-	stretch = stretch;		/* To suppress warning on read-only cfg. */
-	i = dj->index + 1;
-	if (!i || !dj->sect)	/* Report EOT when index has reached 65535 */
-		return FR_NO_FILE;
-
-	if (!(i % (SS(dj->fs) / SZ_DIR))) {	/* Sector changed? */
-		dj->sect++;					/* Next sector */
-
-		if (dj->clust == 0) {	/* Static table */
-			if (i >= dj->fs->n_rootdir)	/* Report EOT when end of table */
-				return FR_NO_FILE;
-		}
-		else {					/* Dynamic table */
-			if (((i / (SS(dj->fs) / SZ_DIR)) & (dj->fs->csize - 1)) == 0) {	/* Cluster changed? */
-				clst = get_fat(dj->fs, dj->clust);				/* Get next cluster */
-				if (clst <= 1) return FR_INT_ERR;
-				if (clst == 0xFFFFFFFF) return FR_DISK_ERR;
-				if (clst >= dj->fs->n_fatent) {					/* When it reached end of dynamic table */
-#if !_FS_READONLY
-					BYTE c;
-					if (!stretch) return FR_NO_FILE;			/* When do not stretch, report EOT */
-					clst = create_chain(dj->fs, dj->clust);		/* Stretch cluster chain */
-					if (clst == 0) return FR_DENIED;			/* No free cluster */
-					if (clst == 1) return FR_INT_ERR;
-					if (clst == 0xFFFFFFFF) return FR_DISK_ERR;
-					/* Clean-up stretched table */
-					if (move_window(dj->fs, 0)) return FR_DISK_ERR;	/* Flush active window */
-					mem_set(dj->fs->win, 0, SS(dj->fs));			/* Clear window buffer */
-					dj->fs->winsect = clust2sect(dj->fs, clst);	/* Cluster start sector */
-					for (c = 0; c < dj->fs->csize; c++) {		/* Fill the new cluster with 0 */
-						dj->fs->wflag = 1;
-						if (move_window(dj->fs, 0)) return FR_DISK_ERR;
-						dj->fs->winsect++;
-					}
-					dj->fs->winsect -= c;						/* Rewind window address */
-#else
-					return FR_NO_FILE;			/* Report EOT */
-#endif
-				}
-				dj->clust = clst;				/* Initialize data for new cluster */
-				dj->sect = clust2sect(dj->fs, clst);
-			}
-		}
-	}
-
-	dj->index = i;
-	dj->dir = dj->fs->win + (i % (SS(dj->fs) / SZ_DIR)) * SZ_DIR;
-
-	return FR_OK;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Directory handling - Load/Store start cluster number                  */
-/*-----------------------------------------------------------------------*/
-
-static
-DWORD ld_clust (
-	FATFS *fs,	/* Pointer to the fs object */
-	BYTE *dir	/* Pointer to the directory entry */
-)
-{
-	DWORD cl;
-
-	cl = LD_WORD(dir+DIR_FstClusLO);
-	if (fs->fs_type == FS_FAT32)
-		cl |= (DWORD)LD_WORD(dir+DIR_FstClusHI) << 16;
-
-	return cl;
-}
-
-
-#if !_FS_READONLY
-static
-void st_clust (
-	BYTE *dir,	/* Pointer to the directory entry */
-	DWORD cl	/* Value to be set */
-)
-{
-	ST_WORD(dir+DIR_FstClusLO, cl);
-	ST_WORD(dir+DIR_FstClusHI, cl >> 16);
-}
-#endif
-
-
-
-/*-----------------------------------------------------------------------*/
-/* LFN handling - Test/Pick/Fit an LFN segment from/to directory entry   */
-/*-----------------------------------------------------------------------*/
-#if _USE_LFN
-static
-const BYTE LfnOfs[] = {1,3,5,7,9,14,16,18,20,22,24,28,30};	/* Offset of LFN chars in the directory entry */
-
-
-static
-int cmp_lfn (			/* 1:Matched, 0:Not matched */
-	WCHAR *lfnbuf,		/* Pointer to the LFN to be compared */
-	BYTE *dir			/* Pointer to the directory entry containing a part of LFN */
-)
-{
-	UINT i, s;
-	WCHAR wc, uc;
-
-
-	i = ((dir[LDIR_Ord] & ~LLE) - 1) * 13;	/* Get offset in the LFN buffer */
-	s = 0; wc = 1;
-	do {
-		uc = LD_WORD(dir+LfnOfs[s]);	/* Pick an LFN character from the entry */
-		if (wc) {	/* Last char has not been processed */
-			wc = ff_wtoupper(uc);		/* Convert it to upper case */
-			if (i >= _MAX_LFN || wc != ff_wtoupper(lfnbuf[i++]))	/* Compare it */
-				return 0;				/* Not matched */
-		} else {
-			if (uc != 0xFFFF) return 0;	/* Check filler */
-		}
-	} while (++s < 13);				/* Repeat until all chars in the entry are checked */
-
-	if ((dir[LDIR_Ord] & LLE) && wc && lfnbuf[i])	/* Last segment matched but different length */
-		return 0;
-
-	return 1;						/* The part of LFN matched */
-}
-
-
-
-static
-int pick_lfn (			/* 1:Succeeded, 0:Buffer overflow */
-	WCHAR *lfnbuf,		/* Pointer to the Unicode-LFN buffer */
-	BYTE *dir			/* Pointer to the directory entry */
-)
-{
-	UINT i, s;
-	WCHAR wc, uc;
-
-
-	i = ((dir[LDIR_Ord] & 0x3F) - 1) * 13;	/* Offset in the LFN buffer */
-
-	s = 0; wc = 1;
-	do {
-		uc = LD_WORD(dir+LfnOfs[s]);		/* Pick an LFN character from the entry */
-		if (wc) {	/* Last char has not been processed */
-			if (i >= _MAX_LFN) return 0;	/* Buffer overflow? */
-			lfnbuf[i++] = wc = uc;			/* Store it */
-		} else {
-			if (uc != 0xFFFF) return 0;		/* Check filler */
-		}
-	} while (++s < 13);						/* Read all character in the entry */
-
-	if (dir[LDIR_Ord] & LLE) {				/* Put terminator if it is the last LFN part */
-		if (i >= _MAX_LFN) return 0;		/* Buffer overflow? */
-		lfnbuf[i] = 0;
-	}
-
-	return 1;
-}
-
-
-#if !_FS_READONLY
-static
-void fit_lfn (
-	const WCHAR *lfnbuf,	/* Pointer to the LFN buffer */
-	BYTE *dir,				/* Pointer to the directory entry */
-	BYTE ord,				/* LFN order (1-20) */
-	BYTE sum				/* SFN sum */
-)
-{
-	UINT i, s;
-	WCHAR wc;
-
-
-	dir[LDIR_Chksum] = sum;			/* Set check sum */
-	dir[LDIR_Attr] = AM_LFN;		/* Set attribute. LFN entry */
-	dir[LDIR_Type] = 0;
-	ST_WORD(dir+LDIR_FstClusLO, 0);
-
-	i = (ord - 1) * 13;				/* Get offset in the LFN buffer */
-	s = wc = 0;
-	do {
-		if (wc != 0xFFFF) wc = lfnbuf[i++];	/* Get an effective char */
-		ST_WORD(dir+LfnOfs[s], wc);	/* Put it */
-		if (!wc) wc = 0xFFFF;		/* Padding chars following last char */
-	} while (++s < 13);
-	if (wc == 0xFFFF || !lfnbuf[i]) ord |= LLE;	/* Bottom LFN part is the start of LFN sequence */
-	dir[LDIR_Ord] = ord;			/* Set the LFN order */
-}
-
-#endif
-#endif
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Create numbered name                                                  */
-/*-----------------------------------------------------------------------*/
-#if _USE_LFN
-void gen_numname (
-	BYTE *dst,			/* Pointer to generated SFN */
-	const BYTE *src,	/* Pointer to source SFN to be modified */
-	const WCHAR *lfn,	/* Pointer to LFN */
-	WORD seq			/* Sequence number */
-)
-{
-	BYTE ns[8], c;
-	UINT i, j;
-
-
-	mem_cpy(dst, src, 11);
-
-	if (seq > 5) {	/* On many collisions, generate a hash number instead of sequential number */
-		do seq = (seq >> 1) + (seq << 15) + (WORD)*lfn++; while (*lfn);
-	}
-
-	/* itoa (hexdecimal) */
-	i = 7;
-	do {
-		c = (seq % 16) + '0';
-		if (c > '9') c += 7;
-		ns[i--] = c;
-		seq /= 16;
-	} while (seq);
-	ns[i] = '~';
-
-	/* Append the number */
-	for (j = 0; j < i && dst[j] != ' '; j++) {
-		if (IsDBCS1(dst[j])) {
-			if (j == i - 1) break;
-			j++;
-		}
-	}
-	do {
-		dst[j++] = (i < 8) ? ns[i++] : ' ';
-	} while (j < 8);
-}
-#endif
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Calculate sum of an SFN                                               */
-/*-----------------------------------------------------------------------*/
-#if _USE_LFN
-static
-BYTE sum_sfn (
-	const BYTE *dir		/* Ptr to directory entry */
-)
-{
-	BYTE sum = 0;
-	UINT n = 11;
-
-	do sum = (sum >> 1) + (sum << 7) + *dir++; while (--n);
-	return sum;
-}
-#endif
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Directory handling - Find an object in the directory                  */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT dir_find (
-	DIR *dj			/* Pointer to the directory object linked to the file name */
-)
-{
-	FRESULT res;
-	BYTE c, *dir;
-#if _USE_LFN
-	BYTE a, ord, sum;
-#endif
-
-	res = dir_sdi(dj, 0);			/* Rewind directory object */
-	if (res != FR_OK) return res;
-
-#if _USE_LFN
-	ord = sum = 0xFF;
-#endif
-	do {
-		res = move_window(dj->fs, dj->sect);
-		if (res != FR_OK) break;
-		dir = dj->dir;					/* Ptr to the directory entry of current index */
-		c = dir[DIR_Name];
-		if (c == 0) { res = FR_NO_FILE; break; }	/* Reached to end of table */
-#if _USE_LFN	/* LFN configuration */
-		a = dir[DIR_Attr] & AM_MASK;
-		if (c == DDE || ((a & AM_VOL) && a != AM_LFN)) {	/* An entry without valid data */
-			ord = 0xFF;
-		} else {
-			if (a == AM_LFN) {			/* An LFN entry is found */
-				if (dj->lfn) {
-					if (c & LLE) {		/* Is it start of LFN sequence? */
-						sum = dir[LDIR_Chksum];
-						c &= ~LLE; ord = c;	/* LFN start order */
-						dj->lfn_idx = dj->index;
-					}
-					/* Check validity of the LFN entry and compare it with given name */
-					ord = (c == ord && sum == dir[LDIR_Chksum] && cmp_lfn(dj->lfn, dir)) ? ord - 1 : 0xFF;
-				}
-			} else {					/* An SFN entry is found */
-				if (!ord && sum == sum_sfn(dir)) break;	/* LFN matched? */
-				ord = 0xFF; dj->lfn_idx = 0xFFFF;	/* Reset LFN sequence */
-				if (!(dj->fn[NS] & NS_LOSS) && !mem_cmp(dir, dj->fn, 11)) break;	/* SFN matched? */
-			}
-		}
-#else		/* Non LFN configuration */
-		if (!(dir[DIR_Attr] & AM_VOL) && !mem_cmp(dir, dj->fn, 11)) /* Is it a valid entry? */
-			break;
-#endif
-		res = dir_next(dj, 0);		/* Next entry */
-	} while (res == FR_OK);
-
-	return res;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Read an object from the directory                                     */
-/*-----------------------------------------------------------------------*/
-#if _FS_MINIMIZE <= 1
-static
-FRESULT dir_read (
-	DIR *dj			/* Pointer to the directory object that pointing the entry to be read */
-)
-{
-	FRESULT res;
-	BYTE c, *dir;
-#if _USE_LFN
-	BYTE a, ord = 0xFF, sum = 0xFF;
-#endif
-
-	res = FR_NO_FILE;
-	while (dj->sect) {
-		res = move_window(dj->fs, dj->sect);
-		if (res != FR_OK) break;
-		dir = dj->dir;					/* Ptr to the directory entry of current index */
-		c = dir[DIR_Name];
-		if (c == 0) { res = FR_NO_FILE; break; }	/* Reached to end of table */
-#if _USE_LFN	/* LFN configuration */
-		a = dir[DIR_Attr] & AM_MASK;
-		if (c == DDE || (!_FS_RPATH && c == '.') || ((a & AM_VOL) && a != AM_LFN)) {	/* An entry without valid data */
-			ord = 0xFF;
-		} else {
-			if (a == AM_LFN) {			/* An LFN entry is found */
-				if (c & LLE) {			/* Is it start of LFN sequence? */
-					sum = dir[LDIR_Chksum];
-					c &= ~LLE; ord = c;
-					dj->lfn_idx = dj->index;
-				}
-				/* Check LFN validity and capture it */
-				ord = (c == ord && sum == dir[LDIR_Chksum] && pick_lfn(dj->lfn, dir)) ? ord - 1 : 0xFF;
-			} else {					/* An SFN entry is found */
-				if (ord || sum != sum_sfn(dir))	/* Is there a valid LFN? */
-					dj->lfn_idx = 0xFFFF;		/* It has no LFN. */
-				break;
-			}
-		}
-#else		/* Non LFN configuration */
-		if (c != DDE && (_FS_RPATH || c != '.') && !(dir[DIR_Attr] & AM_VOL))	/* Is it a valid entry? */
-			break;
-#endif
-		res = dir_next(dj, 0);				/* Next entry */
-		if (res != FR_OK) break;
-	}
-
-	if (res != FR_OK) dj->sect = 0;
-
-	return res;
-}
-#endif
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Register an object to the directory                                   */
-/*-----------------------------------------------------------------------*/
-#if !_FS_READONLY
-static
-FRESULT dir_register (	/* FR_OK:Successful, FR_DENIED:No free entry or too many SFN collision, FR_DISK_ERR:Disk error */
-	DIR *dj				/* Target directory with object name to be created */
-)
-{
-	FRESULT res;
-	BYTE c, *dir;
-#if _USE_LFN	/* LFN configuration */
-	WORD n, ne, is;
-	BYTE sn[12], *fn, sum;
-	WCHAR *lfn;
-
-
-	fn = dj->fn; lfn = dj->lfn;
-	mem_cpy(sn, fn, 12);
-
-	if (_FS_RPATH && (sn[NS] & NS_DOT))		/* Cannot create dot entry */
-		return FR_INVALID_NAME;
-
-	if (sn[NS] & NS_LOSS) {			/* When LFN is out of 8.3 format, generate a numbered name */
-		fn[NS] = 0; dj->lfn = 0;			/* Find only SFN */
-		for (n = 1; n < 100; n++) {
-			gen_numname(fn, sn, lfn, n);	/* Generate a numbered name */
-			res = dir_find(dj);				/* Check if the name collides with existing SFN */
-			if (res != FR_OK) break;
-		}
-		if (n == 100) return FR_DENIED;		/* Abort if too many collisions */
-		if (res != FR_NO_FILE) return res;	/* Abort if the result is other than 'not collided' */
-		fn[NS] = sn[NS]; dj->lfn = lfn;
-	}
-
-	if (sn[NS] & NS_LFN) {			/* When LFN is to be created, reserve an SFN + LFN entries. */
-		for (ne = 0; lfn[ne]; ne++) ;
-		ne = (ne + 25) / 13;
-	} else {						/* Otherwise reserve only an SFN entry. */
-		ne = 1;
-	}
-
-	/* Reserve contiguous entries */
-	res = dir_sdi(dj, 0);
-	if (res != FR_OK) return res;
-	n = is = 0;
-	do {
-		res = move_window(dj->fs, dj->sect);
-		if (res != FR_OK) break;
-		c = *dj->dir;				/* Check the entry status */
-		if (c == DDE || c == 0) {	/* Is it a blank entry? */
-			if (n == 0) is = dj->index;	/* First index of the contiguous entry */
-			if (++n == ne) break;	/* A contiguous entry that required count is found */
-		} else {
-			n = 0;					/* Not a blank entry. Restart to search */
-		}
-		res = dir_next(dj, 1);		/* Next entry with table stretch */
-	} while (res == FR_OK);
-
-	if (res == FR_OK && ne > 1) {	/* Initialize LFN entry if needed */
-		res = dir_sdi(dj, is);
-		if (res == FR_OK) {
-			sum = sum_sfn(dj->fn);	/* Sum of the SFN tied to the LFN */
-			ne--;
-			do {					/* Store LFN entries in bottom first */
-				res = move_window(dj->fs, dj->sect);
-				if (res != FR_OK) break;
-				fit_lfn(dj->lfn, dj->dir, (BYTE)ne, sum);
-				dj->fs->wflag = 1;
-				res = dir_next(dj, 0);	/* Next entry */
-			} while (res == FR_OK && --ne);
-		}
-	}
-
-#else	/* Non LFN configuration */
-	res = dir_sdi(dj, 0);
-	if (res == FR_OK) {
-		do {	/* Find a blank entry for the SFN */
-			res = move_window(dj->fs, dj->sect);
-			if (res != FR_OK) break;
-			c = *dj->dir;
-			if (c == DDE || c == 0) break;	/* Is it a blank entry? */
-			res = dir_next(dj, 1);			/* Next entry with table stretch */
-		} while (res == FR_OK);
-	}
-#endif
-
-	if (res == FR_OK) {		/* Initialize the SFN entry */
-		res = move_window(dj->fs, dj->sect);
-		if (res == FR_OK) {
-			dir = dj->dir;
-			mem_set(dir, 0, SZ_DIR);	/* Clean the entry */
-			mem_cpy(dir, dj->fn, 11);	/* Put SFN */
-#if _USE_LFN
-			dir[DIR_NTres] = *(dj->fn+NS) & (NS_BODY | NS_EXT);	/* Put NT flag */
-#endif
-			dj->fs->wflag = 1;
-		}
-	}
-
-	return res;
-}
-#endif /* !_FS_READONLY */
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Remove an object from the directory                                   */
-/*-----------------------------------------------------------------------*/
-#if !_FS_READONLY && !_FS_MINIMIZE
-static
-FRESULT dir_remove (	/* FR_OK: Successful, FR_DISK_ERR: A disk error */
-	DIR *dj				/* Directory object pointing the entry to be removed */
-)
-{
-	FRESULT res;
-#if _USE_LFN	/* LFN configuration */
-	WORD i;
-
-	i = dj->index;	/* SFN index */
-	res = dir_sdi(dj, (WORD)((dj->lfn_idx == 0xFFFF) ? i : dj->lfn_idx));	/* Goto the SFN or top of the LFN entries */
-	if (res == FR_OK) {
-		do {
-			res = move_window(dj->fs, dj->sect);
-			if (res != FR_OK) break;
-			*dj->dir = DDE;			/* Mark the entry "deleted" */
-			dj->fs->wflag = 1;
-			if (dj->index >= i) break;	/* When reached SFN, all entries of the object has been deleted. */
-			res = dir_next(dj, 0);		/* Next entry */
-		} while (res == FR_OK);
-		if (res == FR_NO_FILE) res = FR_INT_ERR;
-	}
-
-#else			/* Non LFN configuration */
-	res = dir_sdi(dj, dj->index);
-	if (res == FR_OK) {
-		res = move_window(dj->fs, dj->sect);
-		if (res == FR_OK) {
-			*dj->dir = DDE;			/* Mark the entry "deleted" */
-			dj->fs->wflag = 1;
-		}
-	}
-#endif
-
-	return res;
-}
-#endif /* !_FS_READONLY */
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Pick a segment and create the object name in directory form           */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT create_name (
-	DIR *dj,			/* Pointer to the directory object */
-	const TCHAR **path	/* Pointer to pointer to the segment in the path string */
-)
-{
-#ifdef _EXCVT
-	static const BYTE excvt[] = _EXCVT;	/* Upper conversion table for extended chars */
-#endif
-
-#if _USE_LFN	/* LFN configuration */
-	BYTE b, cf;
-	WCHAR w, *lfn;
-	UINT i, ni, si, di;
-	const TCHAR *p;
-
-	/* Create LFN in Unicode */
-	for (p = *path; *p == '/' || *p == '\\'; p++) ;	/* Strip duplicated separator */
-	lfn = dj->lfn;
-	si = di = 0;
-	for (;;) {
-		w = p[si++];					/* Get a character */
-		if (w < ' ' || w == '/' || w == '\\') break;	/* Break on end of segment */
-		if (di >= _MAX_LFN)				/* Reject too long name */
-			return FR_INVALID_NAME;
-#if !_LFN_UNICODE
-		w &= 0xFF;
-		if (IsDBCS1(w)) {				/* Check if it is a DBC 1st byte (always false on SBCS cfg) */
-			b = (BYTE)p[si++];			/* Get 2nd byte */
-			if (!IsDBCS2(b))
-				return FR_INVALID_NAME;	/* Reject invalid sequence */
-			w = (w << 8) + b;			/* Create a DBC */
-		}
-		w = ff_convert(w, 1);			/* Convert ANSI/OEM to Unicode */
-		if (!w) return FR_INVALID_NAME;	/* Reject invalid code */
-#endif
-		if (w < 0x80 && chk_chr("\"*:<>\?|\x7F", w)) /* Reject illegal chars for LFN */
-			return FR_INVALID_NAME;
-		lfn[di++] = w;					/* Store the Unicode char */
-	}
-	*path = &p[si];						/* Return pointer to the next segment */
-	cf = (w < ' ') ? NS_LAST : 0;		/* Set last segment flag if end of path */
-#if _FS_RPATH
-	if ((di == 1 && lfn[di-1] == '.') || /* Is this a dot entry? */
-		(di == 2 && lfn[di-1] == '.' && lfn[di-2] == '.')) {
-		lfn[di] = 0;
-		for (i = 0; i < 11; i++)
-			dj->fn[i] = (i < di) ? '.' : ' ';
-		dj->fn[i] = cf | NS_DOT;		/* This is a dot entry */
-		return FR_OK;
-	}
-#endif
-	while (di) {						/* Strip trailing spaces and dots */
-		w = lfn[di-1];
-		if (w != ' ' && w != '.') break;
-		di--;
-	}
-	if (!di) return FR_INVALID_NAME;	/* Reject nul string */
-
-	lfn[di] = 0;						/* LFN is created */
-
-	/* Create SFN in directory form */
-	mem_set(dj->fn, ' ', 11);
-	for (si = 0; lfn[si] == ' ' || lfn[si] == '.'; si++) ;	/* Strip leading spaces and dots */
-	if (si) cf |= NS_LOSS | NS_LFN;
-	while (di && lfn[di - 1] != '.') di--;	/* Find extension (di<=si: no extension) */
-
-	b = i = 0; ni = 8;
-	for (;;) {
-		w = lfn[si++];					/* Get an LFN char */
-		if (!w) break;					/* Break on end of the LFN */
-		if (w == ' ' || (w == '.' && si != di)) {	/* Remove spaces and dots */
-			cf |= NS_LOSS | NS_LFN; continue;
-		}
-
-		if (i >= ni || si == di) {		/* Extension or end of SFN */
-			if (ni == 11) {				/* Long extension */
-				cf |= NS_LOSS | NS_LFN; break;
-			}
-			if (si != di) cf |= NS_LOSS | NS_LFN;	/* Out of 8.3 format */
-			if (si > di) break;			/* No extension */
-			si = di; i = 8; ni = 11;	/* Enter extension section */
-			b <<= 2; continue;
-		}
-
-		if (w >= 0x80) {				/* Non ASCII char */
-#ifdef _EXCVT
-			w = ff_convert(w, 0);		/* Unicode -> OEM code */
-			if (w) w = excvt[w - 0x80];	/* Convert extended char to upper (SBCS) */
-#else
-			w = ff_convert(ff_wtoupper(w), 0);	/* Upper converted Unicode -> OEM code */
-#endif
-			cf |= NS_LFN;				/* Force create LFN entry */
-		}
-
-		if (_DF1S && w >= 0x100) {		/* Double byte char (always false on SBCS cfg) */
-			if (i >= ni - 1) {
-				cf |= NS_LOSS | NS_LFN; i = ni; continue;
-			}
-			dj->fn[i++] = (BYTE)(w >> 8);
-		} else {						/* Single byte char */
-			if (!w || chk_chr("+,;=[]", w)) {	/* Replace illegal chars for SFN */
-				w = '_'; cf |= NS_LOSS | NS_LFN;/* Lossy conversion */
-			} else {
-				if (IsUpper(w)) {		/* ASCII large capital */
-					b |= 2;
-				} else {
-					if (IsLower(w)) {	/* ASCII small capital */
-						b |= 1; w -= 0x20;
-					}
-				}
-			}
-		}
-		dj->fn[i++] = (BYTE)w;
-	}
-
-	if (dj->fn[0] == DDE) dj->fn[0] = NDDE;	/* If the first char collides with deleted mark, replace it with 0x05 */
-
-	if (ni == 8) b <<= 2;
-	if ((b & 0x0C) == 0x0C || (b & 0x03) == 0x03)	/* Create LFN entry when there are composite capitals */
-		cf |= NS_LFN;
-	if (!(cf & NS_LFN)) {						/* When LFN is in 8.3 format without extended char, NT flags are created */
-		if ((b & 0x03) == 0x01) cf |= NS_EXT;	/* NT flag (Extension has only small capital) */
-		if ((b & 0x0C) == 0x04) cf |= NS_BODY;	/* NT flag (Filename has only small capital) */
-	}
-
-	dj->fn[NS] = cf;	/* SFN is created */
-
-	return FR_OK;
-
-
-#else	/* Non-LFN configuration */
-	BYTE b, c, d, *sfn;
-	UINT ni, si, i;
-	const char *p;
-
-	/* Create file name in directory form */
-	for (p = *path; *p == '/' || *p == '\\'; p++) ;	/* Strip duplicated separator */
-	sfn = dj->fn;
-	mem_set(sfn, ' ', 11);
-	si = i = b = 0; ni = 8;
-#if _FS_RPATH
-	if (p[si] == '.') { /* Is this a dot entry? */
-		for (;;) {
-			c = (BYTE)p[si++];
-			if (c != '.' || si >= 3) break;
-			sfn[i++] = c;
-		}
-		if (c != '/' && c != '\\' && c > ' ') return FR_INVALID_NAME;
-		*path = &p[si];									/* Return pointer to the next segment */
-		sfn[NS] = (c <= ' ') ? NS_LAST | NS_DOT : NS_DOT;	/* Set last segment flag if end of path */
-		return FR_OK;
-	}
-#endif
-	for (;;) {
-		c = (BYTE)p[si++];
-		if (c <= ' ' || c == '/' || c == '\\') break;	/* Break on end of segment */
-		if (c == '.' || i >= ni) {
-			if (ni != 8 || c != '.') return FR_INVALID_NAME;
-			i = 8; ni = 11;
-			b <<= 2; continue;
-		}
-		if (c >= 0x80) {				/* Extended char? */
-			b |= 3;						/* Eliminate NT flag */
-#ifdef _EXCVT
-			c = excvt[c - 0x80];		/* Upper conversion (SBCS) */
-#else
-#if !_DF1S	/* ASCII only cfg */
-			return FR_INVALID_NAME;
-#endif
-#endif
-		}
-		if (IsDBCS1(c)) {				/* Check if it is a DBC 1st byte (always false on SBCS cfg) */
-			d = (BYTE)p[si++];			/* Get 2nd byte */
-			if (!IsDBCS2(d) || i >= ni - 1)	/* Reject invalid DBC */
-				return FR_INVALID_NAME;
-			sfn[i++] = c;
-			sfn[i++] = d;
-		} else {						/* Single byte code */
-			if (chk_chr("\"*+,:;<=>\?[]|\x7F", c))	/* Reject illegal chrs for SFN */
-				return FR_INVALID_NAME;
-			if (IsUpper(c)) {			/* ASCII large capital? */
-				b |= 2;
-			} else {
-				if (IsLower(c)) {		/* ASCII small capital? */
-					b |= 1; c -= 0x20;
-				}
-			}
-			sfn[i++] = c;
-		}
-	}
-	*path = &p[si];						/* Return pointer to the next segment */
-	c = (c <= ' ') ? NS_LAST : 0;		/* Set last segment flag if end of path */
-
-	if (!i) return FR_INVALID_NAME;		/* Reject nul string */
-	if (sfn[0] == DDE) sfn[0] = NDDE;	/* When first char collides with DDE, replace it with 0x05 */
-
-	if (ni == 8) b <<= 2;
-	if ((b & 0x03) == 0x01) c |= NS_EXT;	/* NT flag (Name extension has only small capital) */
-	if ((b & 0x0C) == 0x04) c |= NS_BODY;	/* NT flag (Name body has only small capital) */
-
-	sfn[NS] = c;		/* Store NT flag, File name is created */
-
-	return FR_OK;
-#endif
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Get file information from directory entry                             */
-/*-----------------------------------------------------------------------*/
-#if _FS_MINIMIZE <= 1
-static
-void get_fileinfo (		/* No return code */
-	DIR *dj,			/* Pointer to the directory object */
-	FILINFO *fno	 	/* Pointer to the file information to be filled */
-)
-{
-	UINT i;
-	BYTE nt, *dir;
-	TCHAR *p, c;
-
-
-	p = fno->fname;
-	if (dj->sect) {
-		dir = dj->dir;
-		nt = dir[DIR_NTres];		/* NT flag */
-		for (i = 0; i < 8; i++) {	/* Copy name body */
-			c = dir[i];
-			if (c == ' ') break;
-			if (c == NDDE) c = (TCHAR)DDE;
-			if (_USE_LFN && (nt & NS_BODY) && IsUpper(c)) c += 0x20;
-#if _LFN_UNICODE
-			if (IsDBCS1(c) && i < 7 && IsDBCS2(dir[i+1]))
-				c = (c << 8) | dir[++i];
-			c = ff_convert(c, 1);
-			if (!c) c = '?';
-#endif
-			*p++ = c;
-		}
-		if (dir[8] != ' ') {		/* Copy name extension */
-			*p++ = '.';
-			for (i = 8; i < 11; i++) {
-				c = dir[i];
-				if (c == ' ') break;
-				if (_USE_LFN && (nt & NS_EXT) && IsUpper(c)) c += 0x20;
-#if _LFN_UNICODE
-				if (IsDBCS1(c) && i < 10 && IsDBCS2(dir[i+1]))
-					c = (c << 8) | dir[++i];
-				c = ff_convert(c, 1);
-				if (!c) c = '?';
-#endif
-				*p++ = c;
-			}
-		}
-		fno->fattrib = dir[DIR_Attr];				/* Attribute */
-		fno->fsize = LD_DWORD(dir+DIR_FileSize);	/* Size */
-		fno->fdate = LD_WORD(dir+DIR_WrtDate);		/* Date */
-		fno->ftime = LD_WORD(dir+DIR_WrtTime);		/* Time */
-	}
-	*p = 0;		/* Terminate SFN str by a \0 */
-
-#if _USE_LFN
-	if (fno->lfname && fno->lfsize) {
-		TCHAR *tp = fno->lfname;
-		WCHAR w, *lfn;
-
-		i = 0;
-		if (dj->sect && dj->lfn_idx != 0xFFFF) {/* Get LFN if available */
-			lfn = dj->lfn;
-			while ((w = *lfn++) != 0) {			/* Get an LFN char */
-#if !_LFN_UNICODE
-				w = ff_convert(w, 0);			/* Unicode -> OEM conversion */
-				if (!w) { i = 0; break; }		/* Could not convert, no LFN */
-				if (_DF1S && w >= 0x100)		/* Put 1st byte if it is a DBC (always false on SBCS cfg) */
-					tp[i++] = (TCHAR)(w >> 8);
-#endif
-				if (i >= fno->lfsize - 1) { i = 0; break; }	/* Buffer overflow, no LFN */
-				tp[i++] = (TCHAR)w;
-			}
-		}
-		tp[i] = 0;	/* Terminate the LFN str by a \0 */
-	}
-#endif
-}
-#endif /* _FS_MINIMIZE <= 1 */
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Follow a file path                                                    */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT follow_path (	/* FR_OK(0): successful, !=0: error code */
-	DIR *dj,			/* Directory object to return last directory and found object */
-	const TCHAR *path	/* Full-path string to find a file or directory */
-)
-{
-	FRESULT res;
-	BYTE *dir, ns;
-
-
-#if _FS_RPATH
-	if (*path == '/' || *path == '\\') { /* There is a heading separator */
-		path++;	dj->sclust = 0;		/* Strip it and start from the root dir */
-	} else {							/* No heading separator */
-		dj->sclust = dj->fs->cdir;	/* Start from the current dir */
-	}
-#else
-	if (*path == '/' || *path == '\\')	/* Strip heading separator if exist */
-		path++;
-	dj->sclust = 0;						/* Start from the root dir */
-#endif
-
-	if ((UINT)*path < ' ') {			/* Nul path means the start directory itself */
-		res = dir_sdi(dj, 0);
-		dj->dir = 0;
-	} else {							/* Follow path */
-		for (;;) {
-			res = create_name(dj, &path);	/* Get a segment */
-			if (res != FR_OK) break;
-			res = dir_find(dj);				/* Find it */
-			ns = *(dj->fn+NS);
-			if (res != FR_OK) {				/* Failed to find the object */
-				if (res != FR_NO_FILE) break;	/* Abort if any hard error occurred */
-				/* Object not found */
-				if (_FS_RPATH && (ns & NS_DOT)) {	/* If dot entry is not exit */
-					dj->sclust = 0; dj->dir = 0;	/* It is the root dir */
-					res = FR_OK;
-					if (!(ns & NS_LAST)) continue;
-				} else {							/* Could not find the object */
-					if (!(ns & NS_LAST)) res = FR_NO_PATH;
-				}
-				break;
-			}
-			if (ns & NS_LAST) break;			/* Last segment match. Function completed. */
-			dir = dj->dir;						/* There is next segment. Follow the sub directory */
-			if (!(dir[DIR_Attr] & AM_DIR)) {	/* Cannot follow because it is a file */
-				res = FR_NO_PATH; break;
-			}
-			dj->sclust = ld_clust(dj->fs, dir);
-		}
-	}
-
-	return res;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Load a sector and check if it is an FAT Volume Boot Record            */
-/*-----------------------------------------------------------------------*/
-
-static
-BYTE check_fs (	/* 0:FAT-VBR, 1:Any BR but not FAT, 2:Not a BR, 3:Disk error */
-	FATFS *fs,	/* File system object */
-	DWORD sect	/* Sector# (lba) to check if it is an FAT boot record or not */
-)
-{
-	if (disk_read(fs->drv, fs->win, sect, 1) != RES_OK)	/* Load boot record */
-		return 3;
-	if (LD_WORD(&fs->win[BS_55AA]) != 0xAA55)		/* Check record signature (always placed at offset 510 even if the sector size is >512) */
-		return 2;
-
-	if ((LD_DWORD(&fs->win[BS_FilSysType]) & 0xFFFFFF) == 0x544146)	/* Check "FAT" string */
-		return 0;
-	if ((LD_DWORD(&fs->win[BS_FilSysType32]) & 0xFFFFFF) == 0x544146)
-		return 0;
-
-	return 1;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Check if the file system object is valid or not                       */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT chk_mounted (	/* FR_OK(0): successful, !=0: any error occurred */
-	const TCHAR **path,	/* Pointer to pointer to the path name (drive number) */
-	FATFS **rfs,		/* Pointer to pointer to the found file system object */
-	BYTE wmode			/* !=0: Check write protection for write access */
-)
-{
-	BYTE fmt, b, pi, *tbl;
-	UINT vol;
-	DSTATUS stat;
-	DWORD bsect, fasize, tsect, sysect, nclst, szbfat;
-	WORD nrsv;
-	const TCHAR *p = *path;
-	FATFS *fs;
-
-
-	/* Get logical drive number from the path name */
-	vol = p[0] - '0';					/* Is there a drive number? */
-	if (vol <= 9 && p[1] == ':') {		/* Found a drive number, get and strip it */
-		p += 2; *path = p;				/* Return pointer to the path name */
-	} else {							/* No drive number is given */
-#if _FS_RPATH
-		vol = CurrVol;					/* Use current drive */
-#else
-		vol = 0;						/* Use drive 0 */
-#endif
-	}
-
-	/* Check if the file system object is valid or not */
-	*rfs = 0;
-	if (vol >= _VOLUMES) 				/* Is the drive number valid? */
-		return FR_INVALID_DRIVE;
-	fs = FatFs[vol];					/* Get corresponding file system object */
-	if (!fs) return FR_NOT_ENABLED;		/* Is the file system object available? */
-
-	ENTER_FF(fs);						/* Lock file system */
-
-	*rfs = fs;							/* Return pointer to the corresponding file system object */
-	if (fs->fs_type) {					/* If the volume has been mounted */
-		stat = disk_status(fs->drv);
-		if (!(stat & STA_NOINIT)) {		/* and the physical drive is kept initialized (has not been changed), */
-			if (!_FS_READONLY && wmode && (stat & STA_PROTECT))	/* Check write protection if needed */
-				return FR_WRITE_PROTECTED;
-			return FR_OK;				/* The file system object is valid */
-		}
-	}
-
-	/* The file system object is not valid. */
-	/* Following code attempts to mount the volume. (analyze BPB and initialize the fs object) */
-
-	fs->fs_type = 0;					/* Clear the file system object */
-	fs->drv = LD2PD(vol);				/* Bind the logical drive and a physical drive */
-	stat = disk_initialize(fs->drv);	/* Initialize the physical drive */
-	if (stat & STA_NOINIT)				/* Check if the initialization succeeded */
-		return FR_NOT_READY;			/* Failed to initialize due to no medium or hard error */
-	if (!_FS_READONLY && wmode && (stat & STA_PROTECT))	/* Check disk write protection if needed */
-		return FR_WRITE_PROTECTED;
-#if _MAX_SS != 512						/* Get disk sector size (variable sector size cfg only) */
-	if (disk_ioctl(fs->drv, GET_SECTOR_SIZE, &fs->ssize) != RES_OK)
-		return FR_DISK_ERR;
-#endif
-	/* Search FAT partition on the drive. Supports only generic partitions, FDISK and SFD. */
-	fmt = check_fs(fs, bsect = 0);		/* Load sector 0 and check if it is an FAT-VBR (in SFD) */
-	if (LD2PT(vol) && !fmt) fmt = 1;	/* Force non-SFD if the volume is forced partition */
-	if (fmt == 1) {						/* Not an FAT-VBR, the physical drive can be partitioned */
-		/* Check the partition listed in the partition table */
-		pi = LD2PT(vol);
-		if (pi) pi--;
-		tbl = &fs->win[MBR_Table + pi * SZ_PTE];/* Partition table */
-		if (tbl[4]) {						/* Is the partition existing? */
-			bsect = LD_DWORD(&tbl[8]);		/* Partition offset in LBA */
-			fmt = check_fs(fs, bsect);		/* Check the partition */
-		}
-	}
-	if (fmt == 3) return FR_DISK_ERR;
-	if (fmt) return FR_NO_FILESYSTEM;		/* No FAT volume is found */
-
-	/* An FAT volume is found. Following code initializes the file system object */
-
-	if (LD_WORD(fs->win+BPB_BytsPerSec) != SS(fs))		/* (BPB_BytsPerSec must be equal to the physical sector size) */
-		return FR_NO_FILESYSTEM;
-
-	fasize = LD_WORD(fs->win+BPB_FATSz16);				/* Number of sectors per FAT */
-	if (!fasize) fasize = LD_DWORD(fs->win+BPB_FATSz32);
-	fs->fsize = fasize;
-
-	fs->n_fats = b = fs->win[BPB_NumFATs];				/* Number of FAT copies */
-	if (b != 1 && b != 2) return FR_NO_FILESYSTEM;		/* (Must be 1 or 2) */
-	fasize *= b;										/* Number of sectors for FAT area */
-
-	fs->csize = b = fs->win[BPB_SecPerClus];			/* Number of sectors per cluster */
-	if (!b || (b & (b - 1))) return FR_NO_FILESYSTEM;	/* (Must be power of 2) */
-
-	fs->n_rootdir = LD_WORD(fs->win+BPB_RootEntCnt);	/* Number of root directory entries */
-	if (fs->n_rootdir % (SS(fs) / SZ_DIR)) return FR_NO_FILESYSTEM;	/* (BPB_RootEntCnt must be sector aligned) */
-
-	tsect = LD_WORD(fs->win+BPB_TotSec16);				/* Number of sectors on the volume */
-	if (!tsect) tsect = LD_DWORD(fs->win+BPB_TotSec32);
-
-	nrsv = LD_WORD(fs->win+BPB_RsvdSecCnt);				/* Number of reserved sectors */
-	if (!nrsv) return FR_NO_FILESYSTEM;					/* (BPB_RsvdSecCnt must not be 0) */
-
-	/* Determine the FAT sub type */
-	sysect = nrsv + fasize + fs->n_rootdir / (SS(fs) / SZ_DIR);	/* RSV+FAT+DIR */
-	if (tsect < sysect) return FR_NO_FILESYSTEM;		/* (Invalid volume size) */
-	nclst = (tsect - sysect) / fs->csize;				/* Number of clusters */
-	if (!nclst) return FR_NO_FILESYSTEM;				/* (Invalid volume size) */
-	fmt = FS_FAT12;
-	if (nclst >= MIN_FAT16) fmt = FS_FAT16;
-	if (nclst >= MIN_FAT32) fmt = FS_FAT32;
-
-	/* Boundaries and Limits */
-	fs->n_fatent = nclst + 2;							/* Number of FAT entries */
-	fs->database = bsect + sysect;						/* Data start sector */
-	fs->fatbase = bsect + nrsv; 						/* FAT start sector */
-	if (fmt == FS_FAT32) {
-		if (fs->n_rootdir) return FR_NO_FILESYSTEM;		/* (BPB_RootEntCnt must be 0) */
-		fs->dirbase = LD_DWORD(fs->win+BPB_RootClus);	/* Root directory start cluster */
-		szbfat = fs->n_fatent * 4;						/* (Required FAT size) */
-	} else {
-		if (!fs->n_rootdir)	return FR_NO_FILESYSTEM;	/* (BPB_RootEntCnt must not be 0) */
-		fs->dirbase = fs->fatbase + fasize;				/* Root directory start sector */
-		szbfat = (fmt == FS_FAT16) ?					/* (Required FAT size) */
-			fs->n_fatent * 2 : fs->n_fatent * 3 / 2 + (fs->n_fatent & 1);
-	}
-	if (fs->fsize < (szbfat + (SS(fs) - 1)) / SS(fs))	/* (BPB_FATSz must not be less than required) */
-		return FR_NO_FILESYSTEM;
-
-#if !_FS_READONLY
-	/* Initialize cluster allocation information */
-	fs->free_clust = 0xFFFFFFFF;
-	fs->last_clust = 0;
-
-	/* Get fsinfo if available */
-	if (fmt == FS_FAT32) {
-	 	fs->fsi_flag = 0;
-		fs->fsi_sector = bsect + LD_WORD(fs->win+BPB_FSInfo);
-		if (disk_read(fs->drv, fs->win, fs->fsi_sector, 1) == RES_OK &&
-			LD_WORD(fs->win+BS_55AA) == 0xAA55 &&
-			LD_DWORD(fs->win+FSI_LeadSig) == 0x41615252 &&
-			LD_DWORD(fs->win+FSI_StrucSig) == 0x61417272) {
-				fs->last_clust = LD_DWORD(fs->win+FSI_Nxt_Free);
-				fs->free_clust = LD_DWORD(fs->win+FSI_Free_Count);
-		}
-	}
-#endif
-	fs->fs_type = fmt;		/* FAT sub-type */
-	fs->id = ++Fsid;		/* File system mount ID */
-	fs->winsect = 0;		/* Invalidate sector cache */
-	fs->wflag = 0;
-#if _FS_RPATH
-	fs->cdir = 0;			/* Current directory (root dir) */
-#endif
-#if _FS_LOCK				/* Clear file lock semaphores */
-	clear_lock(fs);
-#endif
-
-	return FR_OK;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Check if the file/dir object is valid or not                          */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT validate (	/* FR_OK(0): The object is valid, !=0: Invalid */
-	void* obj		/* Pointer to the object FIL/DIR to check validity */
-)
-{
-	FIL *fil;
-
-
-	fil = (FIL*)obj;	/* Assuming offset of fs and id in the FIL/DIR is identical */
-	if (!fil->fs || !fil->fs->fs_type || fil->fs->id != fil->id)
-		return FR_INVALID_OBJECT;
-
-	ENTER_FF(fil->fs);		/* Lock file system */
-
-	if (disk_status(fil->fs->drv) & STA_NOINIT)
-		return FR_NOT_READY;
-
-	return FR_OK;
-}
-
-
-
-
-/*--------------------------------------------------------------------------
-
-   Public Functions
-
---------------------------------------------------------------------------*/
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Mount/Unmount a Logical Drive                                         */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_mount (
-	BYTE vol,		/* Logical drive number to be mounted/unmounted */
-	FATFS *fs		/* Pointer to new file system object (NULL for unmount)*/
-)
-{
-	FATFS *rfs;
-
-
-	if (vol >= _VOLUMES)		/* Check if the drive number is valid */
-		return FR_INVALID_DRIVE;
-	rfs = FatFs[vol];			/* Get current fs object */
-
-	if (rfs) {
-#if _FS_LOCK
-		clear_lock(rfs);
-#endif
-#if _FS_REENTRANT				/* Discard sync object of the current volume */
-		if (!ff_del_syncobj(rfs->sobj)) return FR_INT_ERR;
-#endif
-		rfs->fs_type = 0;		/* Clear old fs object */
-	}
-
-	if (fs) {
-		fs->fs_type = 0;		/* Clear new fs object */
-#if _FS_REENTRANT				/* Create sync object for the new volume */
-		if (!ff_cre_syncobj(vol, &fs->sobj)) return FR_INT_ERR;
-#endif
-	}
-	FatFs[vol] = fs;			/* Register new fs object */
-
-	return FR_OK;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Open or Create a File                                                 */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_open (
-	FIL *fp,			/* Pointer to the blank file object */
-	const TCHAR *path,	/* Pointer to the file name */
-	BYTE mode			/* Access mode and file open mode flags */
-)
-{
-	FRESULT res;
-	DIR dj;
-	BYTE *dir;
-	DEF_NAMEBUF;
-
-
-	if (!fp) return FR_INVALID_OBJECT;
-	fp->fs = 0;			/* Clear file object */
-
-#if !_FS_READONLY
-	mode &= FA_READ | FA_WRITE | FA_CREATE_ALWAYS | FA_OPEN_ALWAYS | FA_CREATE_NEW;
-	res = chk_mounted(&path, &dj.fs, (BYTE)(mode & ~FA_READ));
-#else
-	mode &= FA_READ;
-	res = chk_mounted(&path, &dj.fs, 0);
-#endif
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		res = follow_path(&dj, path);	/* Follow the file path */
-		dir = dj.dir;
-#if !_FS_READONLY	/* R/W configuration */
-		if (res == FR_OK) {
-			if (!dir)	/* Current dir itself */
-				res = FR_INVALID_NAME;
-#if _FS_LOCK
-			else
-				res = chk_lock(&dj, (mode & ~FA_READ) ? 1 : 0);
-#endif
-		}
-		/* Create or Open a file */
-		if (mode & (FA_CREATE_ALWAYS | FA_OPEN_ALWAYS | FA_CREATE_NEW)) {
-			DWORD dw, cl;
-
-			if (res != FR_OK) {					/* No file, create new */
-				if (res == FR_NO_FILE)			/* There is no file to open, create a new entry */
-#if _FS_LOCK
-					res = enq_lock() ? dir_register(&dj) : FR_TOO_MANY_OPEN_FILES;
-#else
-					res = dir_register(&dj);
-#endif
-				mode |= FA_CREATE_ALWAYS;		/* File is created */
-				dir = dj.dir;					/* New entry */
-			}
-			else {								/* Any object is already existing */
-				if (dir[DIR_Attr] & (AM_RDO | AM_DIR)) {	/* Cannot overwrite it (R/O or DIR) */
-					res = FR_DENIED;
-				} else {
-					if (mode & FA_CREATE_NEW)	/* Cannot create as new file */
-						res = FR_EXIST;
-				}
-			}
-			if (res == FR_OK && (mode & FA_CREATE_ALWAYS)) {	/* Truncate it if overwrite mode */
-				dw = get_fattime();					/* Created time */
-				ST_DWORD(dir+DIR_CrtTime, dw);
-				dir[DIR_Attr] = 0;					/* Reset attribute */
-				ST_DWORD(dir+DIR_FileSize, 0);		/* size = 0 */
-				cl = ld_clust(dj.fs, dir);			/* Get start cluster */
-				st_clust(dir, 0);					/* cluster = 0 */
-				dj.fs->wflag = 1;
-				if (cl) {							/* Remove the cluster chain if exist */
-					dw = dj.fs->winsect;
-					res = remove_chain(dj.fs, cl);
-					if (res == FR_OK) {
-						dj.fs->last_clust = cl - 1;	/* Reuse the cluster hole */
-						res = move_window(dj.fs, dw);
-					}
-				}
-			}
-		}
-		else {	/* Open an existing file */
-			if (res == FR_OK) {						/* Follow succeeded */
-				if (dir[DIR_Attr] & AM_DIR) {		/* It is a directory */
-					res = FR_NO_FILE;
-				} else {
-					if ((mode & FA_WRITE) && (dir[DIR_Attr] & AM_RDO)) /* R/O violation */
-						res = FR_DENIED;
-				}
-			}
-		}
-		if (res == FR_OK) {
-			if (mode & FA_CREATE_ALWAYS)			/* Set file change flag if created or overwritten */
-				mode |= FA__WRITTEN;
-			fp->dir_sect = dj.fs->winsect;			/* Pointer to the directory entry */
-			fp->dir_ptr = dir;
-#if _FS_LOCK
-			fp->lockid = inc_lock(&dj, (mode & ~FA_READ) ? 1 : 0);
-			if (!fp->lockid) res = FR_INT_ERR;
-#endif
-		}
-
-#else				/* R/O configuration */
-		if (res == FR_OK) {					/* Follow succeeded */
-			dir = dj.dir;
-			if (!dir) {						/* Current dir itself */
-				res = FR_INVALID_NAME;
-			} else {
-				if (dir[DIR_Attr] & AM_DIR)	/* It is a directory */
-					res = FR_NO_FILE;
-			}
-		}
-#endif
-		FREE_BUF();
-
-		if (res == FR_OK) {
-			fp->flag = mode;					/* File access mode */
-			fp->sclust = ld_clust(dj.fs, dir);	/* File start cluster */
-			fp->fsize = LD_DWORD(dir+DIR_FileSize);	/* File size */
-			fp->fptr = 0;						/* File pointer */
-			fp->dsect = 0;
-#if _USE_FASTSEEK
-			fp->cltbl = 0;						/* Normal seek mode */
-#endif
-			fp->fs = dj.fs; fp->id = dj.fs->id;	/* Validate file object */
-		}
-	}
-
-	LEAVE_FF(dj.fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Read File                                                             */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_read (
-	FIL *fp, 		/* Pointer to the file object */
-	void *buff,		/* Pointer to data buffer */
-	UINT btr,		/* Number of bytes to read */
-	UINT *br		/* Pointer to number of bytes read */
-)
-{
-	FRESULT res;
-	DWORD clst, sect, remain;
-	UINT rcnt, cc;
-	BYTE csect, *rbuff = buff;
-
-
-	*br = 0;	/* Clear read byte counter */
-
-	res = validate(fp);							/* Check validity */
-	if (res != FR_OK) LEAVE_FF(fp->fs, res);
-	if (fp->flag & FA__ERROR)					/* Aborted file? */
-		LEAVE_FF(fp->fs, FR_INT_ERR);
-	if (!(fp->flag & FA_READ)) 					/* Check access mode */
-		LEAVE_FF(fp->fs, FR_DENIED);
-	remain = fp->fsize - fp->fptr;
-	if (btr > remain) btr = (UINT)remain;		/* Truncate btr by remaining bytes */
-
-	for ( ;  btr;								/* Repeat until all data read */
-		rbuff += rcnt, fp->fptr += rcnt, *br += rcnt, btr -= rcnt) {
-		if ((fp->fptr % SS(fp->fs)) == 0) {		/* On the sector boundary? */
-			csect = (BYTE)(fp->fptr / SS(fp->fs) & (fp->fs->csize - 1));	/* Sector offset in the cluster */
-			if (!csect) {						/* On the cluster boundary? */
-				if (fp->fptr == 0) {			/* On the top of the file? */
-					clst = fp->sclust;			/* Follow from the origin */
-				} else {						/* Middle or end of the file */
-#if _USE_FASTSEEK
-					if (fp->cltbl)
-						clst = clmt_clust(fp, fp->fptr);	/* Get cluster# from the CLMT */
-					else
-#endif
-						clst = get_fat(fp->fs, fp->clust);	/* Follow cluster chain on the FAT */
-				}
-				if (clst < 2) ABORT(fp->fs, FR_INT_ERR);
-				if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
-				fp->clust = clst;				/* Update current cluster */
-			}
-			sect = clust2sect(fp->fs, fp->clust);	/* Get current sector */
-			if (!sect) ABORT(fp->fs, FR_INT_ERR);
-			sect += csect;
-			cc = btr / SS(fp->fs);				/* When remaining bytes >= sector size, */
-			if (cc) {							/* Read maximum contiguous sectors directly */
-				if (csect + cc > fp->fs->csize)	/* Clip at cluster boundary */
-					cc = fp->fs->csize - csect;
-				if (disk_read(fp->fs->drv, rbuff, sect, (BYTE)cc) != RES_OK)
-					ABORT(fp->fs, FR_DISK_ERR);
-#if !_FS_READONLY && _FS_MINIMIZE <= 2			/* Replace one of the read sectors with cached data if it contains a dirty sector */
-#if _FS_TINY
-				if (fp->fs->wflag && fp->fs->winsect - sect < cc)
-					mem_cpy(rbuff + ((fp->fs->winsect - sect) * SS(fp->fs)), fp->fs->win, SS(fp->fs));
-#else
-				if ((fp->flag & FA__DIRTY) && fp->dsect - sect < cc)
-					mem_cpy(rbuff + ((fp->dsect - sect) * SS(fp->fs)), fp->buf, SS(fp->fs));
-#endif
-#endif
-				rcnt = SS(fp->fs) * cc;			/* Number of bytes transferred */
-				continue;
-			}
-#if !_FS_TINY
-			if (fp->dsect != sect) {			/* Load data sector if not in cache */
-#if !_FS_READONLY
-				if (fp->flag & FA__DIRTY) {		/* Write-back dirty sector cache */
-					if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
-						ABORT(fp->fs, FR_DISK_ERR);
-					fp->flag &= ~FA__DIRTY;
-				}
-#endif
-				if (disk_read(fp->fs->drv, fp->buf, sect, 1) != RES_OK)	/* Fill sector cache */
-					ABORT(fp->fs, FR_DISK_ERR);
-			}
-#endif
-			fp->dsect = sect;
-		}
-		rcnt = SS(fp->fs) - ((UINT)fp->fptr % SS(fp->fs));	/* Get partial sector data from sector buffer */
-		if (rcnt > btr) rcnt = btr;
-#if _FS_TINY
-		if (move_window(fp->fs, fp->dsect))		/* Move sector window */
-			ABORT(fp->fs, FR_DISK_ERR);
-		mem_cpy(rbuff, &fp->fs->win[fp->fptr % SS(fp->fs)], rcnt);	/* Pick partial sector */
-#else
-		mem_cpy(rbuff, &fp->buf[fp->fptr % SS(fp->fs)], rcnt);	/* Pick partial sector */
-#endif
-	}
-
-	LEAVE_FF(fp->fs, FR_OK);
-}
-
-
-
-
-#if !_FS_READONLY
-/*-----------------------------------------------------------------------*/
-/* Write File                                                            */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_write (
-	FIL *fp,			/* Pointer to the file object */
-	const void *buff,	/* Pointer to the data to be written */
-	UINT btw,			/* Number of bytes to write */
-	UINT *bw			/* Pointer to number of bytes written */
-)
-{
-	FRESULT res;
-	DWORD clst, sect;
-	UINT wcnt, cc;
-	const BYTE *wbuff = buff;
-	BYTE csect;
-
-
-	*bw = 0;	/* Clear write byte counter */
-
-	res = validate(fp);						/* Check validity */
-	if (res != FR_OK) LEAVE_FF(fp->fs, res);
-	if (fp->flag & FA__ERROR)				/* Aborted file? */
-		LEAVE_FF(fp->fs, FR_INT_ERR);
-	if (!(fp->flag & FA_WRITE))				/* Check access mode */
-		LEAVE_FF(fp->fs, FR_DENIED);
-	if ((DWORD)(fp->fsize + btw) < fp->fsize) btw = 0;	/* File size cannot reach 4GB */
-
-	for ( ;  btw;							/* Repeat until all data written */
-		wbuff += wcnt, fp->fptr += wcnt, *bw += wcnt, btw -= wcnt) {
-		if ((fp->fptr % SS(fp->fs)) == 0) {	/* On the sector boundary? */
-			csect = (BYTE)(fp->fptr / SS(fp->fs) & (fp->fs->csize - 1));	/* Sector offset in the cluster */
-			if (!csect) {					/* On the cluster boundary? */
-				if (fp->fptr == 0) {		/* On the top of the file? */
-					clst = fp->sclust;		/* Follow from the origin */
-					if (clst == 0)			/* When no cluster is allocated, */
-						fp->sclust = clst = create_chain(fp->fs, 0);	/* Create a new cluster chain */
-				} else {					/* Middle or end of the file */
-#if _USE_FASTSEEK
-					if (fp->cltbl)
-						clst = clmt_clust(fp, fp->fptr);	/* Get cluster# from the CLMT */
-					else
-#endif
-						clst = create_chain(fp->fs, fp->clust);	/* Follow or stretch cluster chain on the FAT */
-				}
-				if (clst == 0) break;		/* Could not allocate a new cluster (disk full) */
-				if (clst == 1) ABORT(fp->fs, FR_INT_ERR);
-				if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
-				fp->clust = clst;			/* Update current cluster */
-			}
-#if _FS_TINY
-			if (fp->fs->winsect == fp->dsect && move_window(fp->fs, 0))	/* Write-back sector cache */
-				ABORT(fp->fs, FR_DISK_ERR);
-#else
-			if (fp->flag & FA__DIRTY) {		/* Write-back sector cache */
-				if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
-					ABORT(fp->fs, FR_DISK_ERR);
-				fp->flag &= ~FA__DIRTY;
-			}
-#endif
-			sect = clust2sect(fp->fs, fp->clust);	/* Get current sector */
-			if (!sect) ABORT(fp->fs, FR_INT_ERR);
-			sect += csect;
-			cc = btw / SS(fp->fs);			/* When remaining bytes >= sector size, */
-			if (cc) {						/* Write maximum contiguous sectors directly */
-				if (csect + cc > fp->fs->csize)	/* Clip at cluster boundary */
-					cc = fp->fs->csize - csect;
-				if (disk_write(fp->fs->drv, wbuff, sect, (BYTE)cc) != RES_OK)
-					ABORT(fp->fs, FR_DISK_ERR);
-#if _FS_TINY
-				if (fp->fs->winsect - sect < cc) {	/* Refill sector cache if it gets invalidated by the direct write */
-					mem_cpy(fp->fs->win, wbuff + ((fp->fs->winsect - sect) * SS(fp->fs)), SS(fp->fs));
-					fp->fs->wflag = 0;
-				}
-#else
-				if (fp->dsect - sect < cc) { /* Refill sector cache if it gets invalidated by the direct write */
-					mem_cpy(fp->buf, wbuff + ((fp->dsect - sect) * SS(fp->fs)), SS(fp->fs));
-					fp->flag &= ~FA__DIRTY;
-				}
-#endif
-				wcnt = SS(fp->fs) * cc;		/* Number of bytes transferred */
-				continue;
-			}
-#if _FS_TINY
-			if (fp->fptr >= fp->fsize) {	/* Avoid silly cache filling at growing edge */
-				if (move_window(fp->fs, 0)) ABORT(fp->fs, FR_DISK_ERR);
-				fp->fs->winsect = sect;
-			}
-#else
-			if (fp->dsect != sect) {		/* Fill sector cache with file data */
-				if (fp->fptr < fp->fsize &&
-					disk_read(fp->fs->drv, fp->buf, sect, 1) != RES_OK)
-						ABORT(fp->fs, FR_DISK_ERR);
-			}
-#endif
-			fp->dsect = sect;
-		}
-		wcnt = SS(fp->fs) - ((UINT)fp->fptr % SS(fp->fs));/* Put partial sector into file I/O buffer */
-		if (wcnt > btw) wcnt = btw;
-#if _FS_TINY
-		if (move_window(fp->fs, fp->dsect))	/* Move sector window */
-			ABORT(fp->fs, FR_DISK_ERR);
-		mem_cpy(&fp->fs->win[fp->fptr % SS(fp->fs)], wbuff, wcnt);	/* Fit partial sector */
-		fp->fs->wflag = 1;
-#else
-		mem_cpy(&fp->buf[fp->fptr % SS(fp->fs)], wbuff, wcnt);	/* Fit partial sector */
-		fp->flag |= FA__DIRTY;
-#endif
-	}
-
-	if (fp->fptr > fp->fsize) fp->fsize = fp->fptr;	/* Update file size if needed */
-	fp->flag |= FA__WRITTEN;						/* Set file change flag */
-
-	LEAVE_FF(fp->fs, FR_OK);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Synchronize the File Object                                           */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_sync (
-	FIL *fp		/* Pointer to the file object */
-)
-{
-	FRESULT res;
-	DWORD tim;
-	BYTE *dir;
-
-
-	res = validate(fp);					/* Check validity of the object */
-	if (res == FR_OK) {
-		if (fp->flag & FA__WRITTEN) {	/* Has the file been written? */
-#if !_FS_TINY	/* Write-back dirty buffer */
-			if (fp->flag & FA__DIRTY) {
-				if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
-					LEAVE_FF(fp->fs, FR_DISK_ERR);
-				fp->flag &= ~FA__DIRTY;
-			}
-#endif
-			/* Update the directory entry */
-			res = move_window(fp->fs, fp->dir_sect);
-			if (res == FR_OK) {
-				dir = fp->dir_ptr;
-				dir[DIR_Attr] |= AM_ARC;					/* Set archive bit */
-				ST_DWORD(dir+DIR_FileSize, fp->fsize);		/* Update file size */
-				st_clust(dir, fp->sclust);					/* Update start cluster */
-				tim = get_fattime();						/* Update updated time */
-				ST_DWORD(dir+DIR_WrtTime, tim);
-				ST_WORD(dir+DIR_LstAccDate, 0);
-				fp->flag &= ~FA__WRITTEN;
-				fp->fs->wflag = 1;
-				res = sync(fp->fs);
-			}
-		}
-	}
-
-	LEAVE_FF(fp->fs, res);
-}
-
-#endif /* !_FS_READONLY */
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Close File                                                            */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_close (
-	FIL *fp		/* Pointer to the file object to be closed */
-)
-{
-	FRESULT res;
-
-
-#if _FS_READONLY
-	res = validate(fp);
-	{
-#if _FS_REENTRANT
-		FATFS *fs = fp->fs;
-#endif
-		if (res == FR_OK) fp->fs = 0;	/* Discard file object */
-		LEAVE_FF(fs, res);
-	}
-#else
-	res = f_sync(fp);		/* Flush cached data */
-#if _FS_LOCK
-	if (res == FR_OK) {		/* Decrement open counter */
-#if _FS_REENTRANT
-		FATFS *fs = fp->fs;;
-		res = validate(fp);
-		if (res == FR_OK) {
-			res = dec_lock(fp->lockid);	
-			unlock_fs(fs, FR_OK);
-		}
-#else
-		res = dec_lock(fp->lockid);
-#endif
-	}
-#endif
-	if (res == FR_OK) fp->fs = 0;	/* Discard file object */
-	return res;
-#endif
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Current Drive/Directory Handlings                                     */
-/*-----------------------------------------------------------------------*/
-
-#if _FS_RPATH >= 1
-
-FRESULT f_chdrive (
-	BYTE drv		/* Drive number */
-)
-{
-	if (drv >= _VOLUMES) return FR_INVALID_DRIVE;
-
-	CurrVol = drv;
-
-	return FR_OK;
-}
-
-
-
-FRESULT f_chdir (
-	const TCHAR *path	/* Pointer to the directory path */
-)
-{
-	FRESULT res;
-	DIR dj;
-	DEF_NAMEBUF;
-
-
-	res = chk_mounted(&path, &dj.fs, 0);
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		res = follow_path(&dj, path);		/* Follow the path */
-		FREE_BUF();
-		if (res == FR_OK) {					/* Follow completed */
-			if (!dj.dir) {
-				dj.fs->cdir = dj.sclust;	/* Start directory itself */
-			} else {
-				if (dj.dir[DIR_Attr] & AM_DIR)	/* Reached to the directory */
-					dj.fs->cdir = ld_clust(dj.fs, dj.dir);
-				else
-					res = FR_NO_PATH;		/* Reached but a file */
-			}
-		}
-		if (res == FR_NO_FILE) res = FR_NO_PATH;
-	}
-
-	LEAVE_FF(dj.fs, res);
-}
-
-
-#if _FS_RPATH >= 2
-FRESULT f_getcwd (
-	TCHAR *path,	/* Pointer to the directory path */
-	UINT sz_path	/* Size of path */
-)
-{
-	FRESULT res;
-	DIR dj;
-	UINT i, n;
-	DWORD ccl;
-	TCHAR *tp;
-	FILINFO fno;
-	DEF_NAMEBUF;
-
-
-	*path = 0;
-	res = chk_mounted((const TCHAR**)&path, &dj.fs, 0);	/* Get current volume */
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		i = sz_path;		/* Bottom of buffer (dir stack base) */
-		dj.sclust = dj.fs->cdir;			/* Start to follow upper dir from current dir */
-		while ((ccl = dj.sclust) != 0) {	/* Repeat while current dir is a sub-dir */
-			res = dir_sdi(&dj, 1);			/* Get parent dir */
-			if (res != FR_OK) break;
-			res = dir_read(&dj);
-			if (res != FR_OK) break;
-			dj.sclust = ld_clust(dj.fs, dj.dir);	/* Goto parent dir */
-			res = dir_sdi(&dj, 0);
-			if (res != FR_OK) break;
-			do {							/* Find the entry links to the child dir */
-				res = dir_read(&dj);
-				if (res != FR_OK) break;
-				if (ccl == ld_clust(dj.fs, dj.dir)) break;	/* Found the entry */
-				res = dir_next(&dj, 0);	
-			} while (res == FR_OK);
-			if (res == FR_NO_FILE) res = FR_INT_ERR;/* It cannot be 'not found'. */
-			if (res != FR_OK) break;
-#if _USE_LFN
-			fno.lfname = path;
-			fno.lfsize = i;
-#endif
-			get_fileinfo(&dj, &fno);		/* Get the dir name and push it to the buffer */
-			tp = fno.fname;
-			if (_USE_LFN && *path) tp = path;
-			for (n = 0; tp[n]; n++) ;
-			if (i < n + 3) {
-				res = FR_NOT_ENOUGH_CORE; break;
-			}
-			while (n) path[--i] = tp[--n];
-			path[--i] = '/';
-		}
-		tp = path;
-		if (res == FR_OK) {
-			*tp++ = '0' + CurrVol;			/* Put drive number */
-			*tp++ = ':';
-			if (i == sz_path) {				/* Root-dir */
-				*tp++ = '/';
-			} else {						/* Sub-dir */
-				do		/* Add stacked path str */
-					*tp++ = path[i++];
-				while (i < sz_path);
-			}
-		}
-		*tp = 0;
-		FREE_BUF();
-	}
-
-	LEAVE_FF(dj.fs, res);
-}
-#endif /* _FS_RPATH >= 2 */
-#endif /* _FS_RPATH >= 1 */
-
-
-
-#if _FS_MINIMIZE <= 2
-/*-----------------------------------------------------------------------*/
-/* Seek File R/W Pointer                                                 */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_lseek (
-	FIL *fp,		/* Pointer to the file object */
-	DWORD ofs		/* File pointer from top of file */
-)
-{
-	FRESULT res;
-
-
-	res = validate(fp);					/* Check validity of the object */
-	if (res != FR_OK) LEAVE_FF(fp->fs, res);
-	if (fp->flag & FA__ERROR)			/* Check abort flag */
-		LEAVE_FF(fp->fs, FR_INT_ERR);
-
-#if _USE_FASTSEEK
-	if (fp->cltbl) {	/* Fast seek */
-		DWORD cl, pcl, ncl, tcl, dsc, tlen, ulen, *tbl;
-
-		if (ofs == CREATE_LINKMAP) {	/* Create CLMT */
-			tbl = fp->cltbl;
-			tlen = *tbl++; ulen = 2;	/* Given table size and required table size */
-			cl = fp->sclust;			/* Top of the chain */
-			if (cl) {
-				do {
-					/* Get a fragment */
-					tcl = cl; ncl = 0; ulen += 2;	/* Top, length and used items */
-					do {
-						pcl = cl; ncl++;
-						cl = get_fat(fp->fs, cl);
-						if (cl <= 1) ABORT(fp->fs, FR_INT_ERR);
-						if (cl == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
-					} while (cl == pcl + 1);
-					if (ulen <= tlen) {		/* Store the length and top of the fragment */
-						*tbl++ = ncl; *tbl++ = tcl;
-					}
-				} while (cl < fp->fs->n_fatent);	/* Repeat until end of chain */
-			}
-			*fp->cltbl = ulen;	/* Number of items used */
-			if (ulen <= tlen)
-				*tbl = 0;		/* Terminate table */
-			else
-				res = FR_NOT_ENOUGH_CORE;	/* Given table size is smaller than required */
-
-		} else {						/* Fast seek */
-			if (ofs > fp->fsize)		/* Clip offset at the file size */
-				ofs = fp->fsize;
-			fp->fptr = ofs;				/* Set file pointer */
-			if (ofs) {
-				fp->clust = clmt_clust(fp, ofs - 1);
-				dsc = clust2sect(fp->fs, fp->clust);
-				if (!dsc) ABORT(fp->fs, FR_INT_ERR);
-				dsc += (ofs - 1) / SS(fp->fs) & (fp->fs->csize - 1);
-				if (fp->fptr % SS(fp->fs) && dsc != fp->dsect) {	/* Refill sector cache if needed */
-#if !_FS_TINY
-#if !_FS_READONLY
-					if (fp->flag & FA__DIRTY) {		/* Write-back dirty sector cache */
-						if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
-							ABORT(fp->fs, FR_DISK_ERR);
-						fp->flag &= ~FA__DIRTY;
-					}
-#endif
-					if (disk_read(fp->fs->drv, fp->buf, dsc, 1) != RES_OK)	/* Load current sector */
-						ABORT(fp->fs, FR_DISK_ERR);
-#endif
-					fp->dsect = dsc;
-				}
-			}
-		}
-	} else
-#endif
-
-	/* Normal Seek */
-	{
-		DWORD clst, bcs, nsect, ifptr;
-
-		if (ofs > fp->fsize					/* In read-only mode, clip offset with the file size */
-#if !_FS_READONLY
-			 && !(fp->flag & FA_WRITE)
-#endif
-			) ofs = fp->fsize;
-
-		ifptr = fp->fptr;
-		fp->fptr = nsect = 0;
-		if (ofs) {
-			bcs = (DWORD)fp->fs->csize * SS(fp->fs);	/* Cluster size (byte) */
-			if (ifptr > 0 &&
-				(ofs - 1) / bcs >= (ifptr - 1) / bcs) {	/* When seek to same or following cluster, */
-				fp->fptr = (ifptr - 1) & ~(bcs - 1);	/* start from the current cluster */
-				ofs -= fp->fptr;
-				clst = fp->clust;
-			} else {									/* When seek to back cluster, */
-				clst = fp->sclust;						/* start from the first cluster */
-#if !_FS_READONLY
-				if (clst == 0) {						/* If no cluster chain, create a new chain */
-					clst = create_chain(fp->fs, 0);
-					if (clst == 1) ABORT(fp->fs, FR_INT_ERR);
-					if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
-					fp->sclust = clst;
-				}
-#endif
-				fp->clust = clst;
-			}
-			if (clst != 0) {
-				while (ofs > bcs) {						/* Cluster following loop */
-#if !_FS_READONLY
-					if (fp->flag & FA_WRITE) {			/* Check if in write mode or not */
-						clst = create_chain(fp->fs, clst);	/* Force stretch if in write mode */
-						if (clst == 0) {				/* When disk gets full, clip file size */
-							ofs = bcs; break;
-						}
-					} else
-#endif
-						clst = get_fat(fp->fs, clst);	/* Follow cluster chain if not in write mode */
-					if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
-					if (clst <= 1 || clst >= fp->fs->n_fatent) ABORT(fp->fs, FR_INT_ERR);
-					fp->clust = clst;
-					fp->fptr += bcs;
-					ofs -= bcs;
-				}
-				fp->fptr += ofs;
-				if (ofs % SS(fp->fs)) {
-					nsect = clust2sect(fp->fs, clst);	/* Current sector */
-					if (!nsect) ABORT(fp->fs, FR_INT_ERR);
-					nsect += ofs / SS(fp->fs);
-				}
-			}
-		}
-		if (fp->fptr % SS(fp->fs) && nsect != fp->dsect) {	/* Fill sector cache if needed */
-#if !_FS_TINY
-#if !_FS_READONLY
-			if (fp->flag & FA__DIRTY) {			/* Write-back dirty sector cache */
-				if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
-					ABORT(fp->fs, FR_DISK_ERR);
-				fp->flag &= ~FA__DIRTY;
-			}
-#endif
-			if (disk_read(fp->fs->drv, fp->buf, nsect, 1) != RES_OK)	/* Fill sector cache */
-				ABORT(fp->fs, FR_DISK_ERR);
-#endif
-			fp->dsect = nsect;
-		}
-#if !_FS_READONLY
-		if (fp->fptr > fp->fsize) {			/* Set file change flag if the file size is extended */
-			fp->fsize = fp->fptr;
-			fp->flag |= FA__WRITTEN;
-		}
-#endif
-	}
-
-	LEAVE_FF(fp->fs, res);
-}
-
-
-
-#if _FS_MINIMIZE <= 1
-/*-----------------------------------------------------------------------*/
-/* Create a Directory Object                                             */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_opendir (
-	DIR *dj,			/* Pointer to directory object to create */
-	const TCHAR *path	/* Pointer to the directory path */
-)
-{
-	FRESULT res;
-	FATFS *fs;
-	DEF_NAMEBUF;
-
-
-	if (!dj) return FR_INVALID_OBJECT;
-
-	res = chk_mounted(&path, &dj->fs, 0);
-	fs = dj->fs;
-	if (res == FR_OK) {
-		INIT_BUF(*dj);
-		res = follow_path(dj, path);			/* Follow the path to the directory */
-		FREE_BUF();
-		if (res == FR_OK) {						/* Follow completed */
-			if (dj->dir) {						/* It is not the root dir */
-				if (dj->dir[DIR_Attr] & AM_DIR) {	/* The object is a directory */
-					dj->sclust = ld_clust(fs, dj->dir);
-				} else {						/* The object is not a directory */
-					res = FR_NO_PATH;
-				}
-			}
-			if (res == FR_OK) {
-				dj->id = fs->id;
-				res = dir_sdi(dj, 0);			/* Rewind dir */
-			}
-		}
-		if (res == FR_NO_FILE) res = FR_NO_PATH;
-		if (res != FR_OK) dj->fs = 0;			/* Invalidate the dir object if function faild */
-	} else {
-		dj->fs = 0;
-	}
-
-	LEAVE_FF(fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Read Directory Entry in Sequence                                      */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_readdir (
-	DIR *dj,			/* Pointer to the open directory object */
-	FILINFO *fno		/* Pointer to file information to return */
-)
-{
-	FRESULT res;
-	DEF_NAMEBUF;
-
-
-	res = validate(dj);						/* Check validity of the object */
-	if (res == FR_OK) {
-		if (!fno) {
-			res = dir_sdi(dj, 0);			/* Rewind the directory object */
-		} else {
-			INIT_BUF(*dj);
-			res = dir_read(dj);				/* Read an directory item */
-			if (res == FR_NO_FILE) {		/* Reached end of dir */
-				dj->sect = 0;
-				res = FR_OK;
-			}
-			if (res == FR_OK) {				/* A valid entry is found */
-				get_fileinfo(dj, fno);		/* Get the object information */
-				res = dir_next(dj, 0);		/* Increment index for next */
-				if (res == FR_NO_FILE) {
-					dj->sect = 0;
-					res = FR_OK;
-				}
-			}
-			FREE_BUF();
-		}
-	}
-
-	LEAVE_FF(dj->fs, res);
-}
-
-
-
-#if _FS_MINIMIZE == 0
-/*-----------------------------------------------------------------------*/
-/* Get File Status                                                       */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_stat (
-	const TCHAR *path,	/* Pointer to the file path */
-	FILINFO *fno		/* Pointer to file information to return */
-)
-{
-	FRESULT res;
-	DIR dj;
-	DEF_NAMEBUF;
-
-
-	res = chk_mounted(&path, &dj.fs, 0);
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		res = follow_path(&dj, path);	/* Follow the file path */
-		if (res == FR_OK) {				/* Follow completed */
-			if (dj.dir)		/* Found an object */
-				get_fileinfo(&dj, fno);
-			else			/* It is root dir */
-				res = FR_INVALID_NAME;
-		}
-		FREE_BUF();
-	}
-
-	LEAVE_FF(dj.fs, res);
-}
-
-
-
-#if !_FS_READONLY
-/*-----------------------------------------------------------------------*/
-/* Get Number of Free Clusters                                           */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_getfree (
-	const TCHAR *path,	/* Pointer to the logical drive number (root dir) */
-	DWORD *nclst,		/* Pointer to the variable to return number of free clusters */
-	FATFS **fatfs		/* Pointer to pointer to corresponding file system object to return */
-)
-{
-	FRESULT res;
-	FATFS *fs;
-	DWORD n, clst, sect, stat;
-	UINT i;
-	BYTE fat, *p;
-
-
-	/* Get drive number */
-	res = chk_mounted(&path, fatfs, 0);
-	fs = *fatfs;
-	if (res == FR_OK) {
-		/* If free_clust is valid, return it without full cluster scan */
-		if (fs->free_clust <= fs->n_fatent - 2) {
-			*nclst = fs->free_clust;
-		} else {
-			/* Get number of free clusters */
-			fat = fs->fs_type;
-			n = 0;
-			if (fat == FS_FAT12) {
-				clst = 2;
-				do {
-					stat = get_fat(fs, clst);
-					if (stat == 0xFFFFFFFF) { res = FR_DISK_ERR; break; }
-					if (stat == 1) { res = FR_INT_ERR; break; }
-					if (stat == 0) n++;
-				} while (++clst < fs->n_fatent);
-			} else {
-				clst = fs->n_fatent;
-				sect = fs->fatbase;
-				i = 0; p = 0;
-				do {
-					if (!i) {
-						res = move_window(fs, sect++);
-						if (res != FR_OK) break;
-						p = fs->win;
-						i = SS(fs);
-					}
-					if (fat == FS_FAT16) {
-						if (LD_WORD(p) == 0) n++;
-						p += 2; i -= 2;
-					} else {
-						if ((LD_DWORD(p) & 0x0FFFFFFF) == 0) n++;
-						p += 4; i -= 4;
-					}
-				} while (--clst);
-			}
-			fs->free_clust = n;
-			if (fat == FS_FAT32) fs->fsi_flag = 1;
-			*nclst = n;
-		}
-	}
-	LEAVE_FF(fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Truncate File                                                         */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_truncate (
-	FIL *fp		/* Pointer to the file object */
-)
-{
-	FRESULT res;
-	DWORD ncl;
-
-
-	if (!fp) return FR_INVALID_OBJECT;
-
-	res = validate(fp);						/* Check validity of the object */
-	if (res == FR_OK) {
-		if (fp->flag & FA__ERROR) {			/* Check abort flag */
-			res = FR_INT_ERR;
-		} else {
-			if (!(fp->flag & FA_WRITE))		/* Check access mode */
-				res = FR_DENIED;
-		}
-	}
-	if (res == FR_OK) {
-		if (fp->fsize > fp->fptr) {
-			fp->fsize = fp->fptr;	/* Set file size to current R/W point */
-			fp->flag |= FA__WRITTEN;
-			if (fp->fptr == 0) {	/* When set file size to zero, remove entire cluster chain */
-				res = remove_chain(fp->fs, fp->sclust);
-				fp->sclust = 0;
-			} else {				/* When truncate a part of the file, remove remaining clusters */
-				ncl = get_fat(fp->fs, fp->clust);
-				res = FR_OK;
-				if (ncl == 0xFFFFFFFF) res = FR_DISK_ERR;
-				if (ncl == 1) res = FR_INT_ERR;
-				if (res == FR_OK && ncl < fp->fs->n_fatent) {
-					res = put_fat(fp->fs, fp->clust, 0x0FFFFFFF);
-					if (res == FR_OK) res = remove_chain(fp->fs, ncl);
-				}
-			}
-		}
-		if (res != FR_OK) fp->flag |= FA__ERROR;
-	}
-
-	LEAVE_FF(fp->fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Delete a File or Directory                                            */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_unlink (
-	const TCHAR *path		/* Pointer to the file or directory path */
-)
-{
-	FRESULT res;
-	DIR dj, sdj;
-	BYTE *dir;
-	DWORD dclst;
-	DEF_NAMEBUF;
-
-
-	res = chk_mounted(&path, &dj.fs, 1);
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		res = follow_path(&dj, path);		/* Follow the file path */
-		if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT))
-			res = FR_INVALID_NAME;			/* Cannot remove dot entry */
-#if _FS_LOCK
-		if (res == FR_OK) res = chk_lock(&dj, 2);	/* Cannot remove open file */
-#endif
-		if (res == FR_OK) {					/* The object is accessible */
-			dir = dj.dir;
-			if (!dir) {
-				res = FR_INVALID_NAME;		/* Cannot remove the start directory */
-			} else {
-				if (dir[DIR_Attr] & AM_RDO)
-					res = FR_DENIED;		/* Cannot remove R/O object */
-			}
-			dclst = ld_clust(dj.fs, dir);
-			if (res == FR_OK && (dir[DIR_Attr] & AM_DIR)) {	/* Is it a sub-dir? */
-				if (dclst < 2) {
-					res = FR_INT_ERR;
-				} else {
-					mem_cpy(&sdj, &dj, sizeof (DIR));	/* Check if the sub-dir is empty or not */
-					sdj.sclust = dclst;
-					res = dir_sdi(&sdj, 2);		/* Exclude dot entries */
-					if (res == FR_OK) {
-						res = dir_read(&sdj);
-						if (res == FR_OK		/* Not empty dir */
-#if _FS_RPATH
-						|| dclst == dj.fs->cdir	/* Current dir */
-#endif
-						) res = FR_DENIED;
-						if (res == FR_NO_FILE) res = FR_OK;	/* Empty */
-					}
-				}
-			}
-			if (res == FR_OK) {
-				res = dir_remove(&dj);		/* Remove the directory entry */
-				if (res == FR_OK) {
-					if (dclst)				/* Remove the cluster chain if exist */
-						res = remove_chain(dj.fs, dclst);
-					if (res == FR_OK) res = sync(dj.fs);
-				}
-			}
-		}
-		FREE_BUF();
-	}
-	LEAVE_FF(dj.fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Create a Directory                                                    */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_mkdir (
-	const TCHAR *path		/* Pointer to the directory path */
-)
-{
-	FRESULT res;
-	DIR dj;
-	BYTE *dir, n;
-	DWORD dsc, dcl, pcl, tim = get_fattime();
-	DEF_NAMEBUF;
-
-
-	res = chk_mounted(&path, &dj.fs, 1);
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		res = follow_path(&dj, path);			/* Follow the file path */
-		if (res == FR_OK) res = FR_EXIST;		/* Any object with same name is already existing */
-		if (_FS_RPATH && res == FR_NO_FILE && (dj.fn[NS] & NS_DOT))
-			res = FR_INVALID_NAME;
-		if (res == FR_NO_FILE) {				/* Can create a new directory */
-			dcl = create_chain(dj.fs, 0);		/* Allocate a cluster for the new directory table */
-			res = FR_OK;
-			if (dcl == 0) res = FR_DENIED;		/* No space to allocate a new cluster */
-			if (dcl == 1) res = FR_INT_ERR;
-			if (dcl == 0xFFFFFFFF) res = FR_DISK_ERR;
-			if (res == FR_OK)					/* Flush FAT */
-				res = move_window(dj.fs, 0);
-			if (res == FR_OK) {					/* Initialize the new directory table */
-				dsc = clust2sect(dj.fs, dcl);
-				dir = dj.fs->win;
-				mem_set(dir, 0, SS(dj.fs));
-				mem_set(dir+DIR_Name, ' ', 8+3);	/* Create "." entry */
-				dir[DIR_Name] = '.';
-				dir[DIR_Attr] = AM_DIR;
-				ST_DWORD(dir+DIR_WrtTime, tim);
-				st_clust(dir, dcl);
-				mem_cpy(dir+SZ_DIR, dir, SZ_DIR); 	/* Create ".." entry */
-				dir[33] = '.'; pcl = dj.sclust;
-				if (dj.fs->fs_type == FS_FAT32 && pcl == dj.fs->dirbase)
-					pcl = 0;
-				st_clust(dir+SZ_DIR, pcl);
-				for (n = dj.fs->csize; n; n--) {	/* Write dot entries and clear following sectors */
-					dj.fs->winsect = dsc++;
-					dj.fs->wflag = 1;
-					res = move_window(dj.fs, 0);
-					if (res != FR_OK) break;
-					mem_set(dir, 0, SS(dj.fs));
-				}
-			}
-			if (res == FR_OK) res = dir_register(&dj);	/* Register the object to the directoy */
-			if (res != FR_OK) {
-				remove_chain(dj.fs, dcl);			/* Could not register, remove cluster chain */
-			} else {
-				dir = dj.dir;
-				dir[DIR_Attr] = AM_DIR;				/* Attribute */
-				ST_DWORD(dir+DIR_WrtTime, tim);		/* Created time */
-				st_clust(dir, dcl);					/* Table start cluster */
-				dj.fs->wflag = 1;
-				res = sync(dj.fs);
-			}
-		}
-		FREE_BUF();
-	}
-
-	LEAVE_FF(dj.fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Change Attribute                                                      */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_chmod (
-	const TCHAR *path,	/* Pointer to the file path */
-	BYTE value,			/* Attribute bits */
-	BYTE mask			/* Attribute mask to change */
-)
-{
-	FRESULT res;
-	DIR dj;
-	BYTE *dir;
-	DEF_NAMEBUF;
-
-
-	res = chk_mounted(&path, &dj.fs, 1);
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		res = follow_path(&dj, path);		/* Follow the file path */
-		FREE_BUF();
-		if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT))
-			res = FR_INVALID_NAME;
-		if (res == FR_OK) {
-			dir = dj.dir;
-			if (!dir) {						/* Is it a root directory? */
-				res = FR_INVALID_NAME;
-			} else {						/* File or sub directory */
-				mask &= AM_RDO|AM_HID|AM_SYS|AM_ARC;	/* Valid attribute mask */
-				dir[DIR_Attr] = (value & mask) | (dir[DIR_Attr] & (BYTE)~mask);	/* Apply attribute change */
-				dj.fs->wflag = 1;
-				res = sync(dj.fs);
-			}
-		}
-	}
-
-	LEAVE_FF(dj.fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Change Timestamp                                                      */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_utime (
-	const TCHAR *path,	/* Pointer to the file/directory name */
-	const FILINFO *fno	/* Pointer to the time stamp to be set */
-)
-{
-	FRESULT res;
-	DIR dj;
-	BYTE *dir;
-	DEF_NAMEBUF;
-
-
-	res = chk_mounted(&path, &dj.fs, 1);
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		res = follow_path(&dj, path);	/* Follow the file path */
-		FREE_BUF();
-		if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT))
-			res = FR_INVALID_NAME;
-		if (res == FR_OK) {
-			dir = dj.dir;
-			if (!dir) {					/* Root directory */
-				res = FR_INVALID_NAME;
-			} else {					/* File or sub-directory */
-				ST_WORD(dir+DIR_WrtTime, fno->ftime);
-				ST_WORD(dir+DIR_WrtDate, fno->fdate);
-				dj.fs->wflag = 1;
-				res = sync(dj.fs);
-			}
-		}
-	}
-
-	LEAVE_FF(dj.fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Rename File/Directory                                                 */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_rename (
-	const TCHAR *path_old,	/* Pointer to the old name */
-	const TCHAR *path_new	/* Pointer to the new name */
-)
-{
-	FRESULT res;
-	DIR djo, djn;
-	BYTE buf[21], *dir;
-	DWORD dw;
-	DEF_NAMEBUF;
-
-
-	res = chk_mounted(&path_old, &djo.fs, 1);
-	if (res == FR_OK) {
-		djn.fs = djo.fs;
-		INIT_BUF(djo);
-		res = follow_path(&djo, path_old);		/* Check old object */
-		if (_FS_RPATH && res == FR_OK && (djo.fn[NS] & NS_DOT))
-			res = FR_INVALID_NAME;
-#if _FS_LOCK
-		if (res == FR_OK) res = chk_lock(&djo, 2);
-#endif
-		if (res == FR_OK) {						/* Old object is found */
-			if (!djo.dir) {						/* Is root dir? */
-				res = FR_NO_FILE;
-			} else {
-				mem_cpy(buf, djo.dir+DIR_Attr, 21);		/* Save the object information except for name */
-				mem_cpy(&djn, &djo, sizeof (DIR));		/* Check new object */
-				res = follow_path(&djn, path_new);
-				if (res == FR_OK) res = FR_EXIST;		/* The new object name is already existing */
-				if (res == FR_NO_FILE) { 				/* Is it a valid path and no name collision? */
-/* Start critical section that an interruption or error can cause cross-link */
-					res = dir_register(&djn);			/* Register the new entry */
-					if (res == FR_OK) {
-						dir = djn.dir;					/* Copy object information except for name */
-						mem_cpy(dir+13, buf+2, 19);
-						dir[DIR_Attr] = buf[0] | AM_ARC;
-						djo.fs->wflag = 1;
-						if (djo.sclust != djn.sclust && (dir[DIR_Attr] & AM_DIR)) {		/* Update .. entry in the directory if needed */
-							dw = clust2sect(djo.fs, ld_clust(djo.fs, dir));
-							if (!dw) {
-								res = FR_INT_ERR;
-							} else {
-								res = move_window(djo.fs, dw);
-								dir = djo.fs->win+SZ_DIR;	/* .. entry */
-								if (res == FR_OK && dir[1] == '.') {
-									dw = (djo.fs->fs_type == FS_FAT32 && djn.sclust == djo.fs->dirbase) ? 0 : djn.sclust;
-									st_clust(dir, dw);
-									djo.fs->wflag = 1;
-								}
-							}
-						}
-						if (res == FR_OK) {
-							res = dir_remove(&djo);		/* Remove old entry */
-							if (res == FR_OK)
-								res = sync(djo.fs);
-						}
-					}
-/* End critical section */
-				}
-			}
-		}
-		FREE_BUF();
-	}
-	LEAVE_FF(djo.fs, res);
-}
-
-#endif /* !_FS_READONLY */
-#endif /* _FS_MINIMIZE == 0 */
-#endif /* _FS_MINIMIZE <= 1 */
-#endif /* _FS_MINIMIZE <= 2 */
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Forward data to the stream directly (available on only tiny cfg)      */
-/*-----------------------------------------------------------------------*/
-#if _USE_FORWARD && _FS_TINY
-
-FRESULT f_forward (
-	FIL *fp, 						/* Pointer to the file object */
-	UINT (*func)(const BYTE*,UINT),	/* Pointer to the streaming function */
-	UINT btr,						/* Number of bytes to forward */
-	UINT *bf						/* Pointer to number of bytes forwarded */
-)
-{
-	FRESULT res;
-	DWORD remain, clst, sect;
-	UINT rcnt;
-	BYTE csect;
-
-
-	*bf = 0;	/* Clear transfer byte counter */
-
-	if (!fp) return FR_INVALID_OBJECT;
-
-	res = validate(fp);								/* Check validity of the object */
-	if (res != FR_OK) LEAVE_FF(fp->fs, res);
-	if (fp->flag & FA__ERROR)						/* Check error flag */
-		LEAVE_FF(fp->fs, FR_INT_ERR);
-	if (!(fp->flag & FA_READ))						/* Check access mode */
-		LEAVE_FF(fp->fs, FR_DENIED);
-
-	remain = fp->fsize - fp->fptr;
-	if (btr > remain) btr = (UINT)remain;			/* Truncate btr by remaining bytes */
-
-	for ( ;  btr && (*func)(0, 0);					/* Repeat until all data transferred or stream becomes busy */
-		fp->fptr += rcnt, *bf += rcnt, btr -= rcnt) {
-		csect = (BYTE)(fp->fptr / SS(fp->fs) & (fp->fs->csize - 1));	/* Sector offset in the cluster */
-		if ((fp->fptr % SS(fp->fs)) == 0) {			/* On the sector boundary? */
-			if (!csect) {							/* On the cluster boundary? */
-				clst = (fp->fptr == 0) ?			/* On the top of the file? */
-					fp->sclust : get_fat(fp->fs, fp->clust);
-				if (clst <= 1) ABORT(fp->fs, FR_INT_ERR);
-				if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
-				fp->clust = clst;					/* Update current cluster */
-			}
-		}
-		sect = clust2sect(fp->fs, fp->clust);		/* Get current data sector */
-		if (!sect) ABORT(fp->fs, FR_INT_ERR);
-		sect += csect;
-		if (move_window(fp->fs, sect))				/* Move sector window */
-			ABORT(fp->fs, FR_DISK_ERR);
-		fp->dsect = sect;
-		rcnt = SS(fp->fs) - (WORD)(fp->fptr % SS(fp->fs));	/* Forward data from sector window */
-		if (rcnt > btr) rcnt = btr;
-		rcnt = (*func)(&fp->fs->win[(WORD)fp->fptr % SS(fp->fs)], rcnt);
-		if (!rcnt) ABORT(fp->fs, FR_INT_ERR);
-	}
-
-	LEAVE_FF(fp->fs, FR_OK);
-}
-#endif /* _USE_FORWARD */
-
-
-
-#if _USE_MKFS && !_FS_READONLY
-/*-----------------------------------------------------------------------*/
-/* Create File System on the Drive                                       */
-/*-----------------------------------------------------------------------*/
-#define N_ROOTDIR	512		/* Number of root dir entries for FAT12/16 */
-#define N_FATS		1		/* Number of FAT copies (1 or 2) */
-
-
-FRESULT f_mkfs (
-	BYTE drv,		/* Logical drive number */
-	BYTE sfd,		/* Partitioning rule 0:FDISK, 1:SFD */
-	UINT au			/* Allocation unit size [bytes] */
-)
-{
-	static const WORD vst[] = { 1024,   512,  256,  128,   64,    32,   16,    8,    4,    2,   0};
-	static const WORD cst[] = {32768, 16384, 8192, 4096, 2048, 16384, 8192, 4096, 2048, 1024, 512};
-	BYTE fmt, md, sys, *tbl, pdrv, part;
-	DWORD n_clst, vs, n, wsect;
-	UINT i;
-	DWORD b_vol, b_fat, b_dir, b_data;	/* LBA */
-	DWORD n_vol, n_rsv, n_fat, n_dir;	/* Size */
-	FATFS *fs;
-	DSTATUS stat;
-
-
-	/* Check mounted drive and clear work area */
-	if (drv >= _VOLUMES) return FR_INVALID_DRIVE;
-	if (sfd > 1) return FR_INVALID_PARAMETER;
-	if (au & (au - 1)) return FR_INVALID_PARAMETER;
-	fs = FatFs[drv];
-	if (!fs) return FR_NOT_ENABLED;
-	fs->fs_type = 0;
-	pdrv = LD2PD(drv);	/* Physical drive */
-	part = LD2PT(drv);	/* Partition (0:auto detect, 1-4:get from partition table)*/
-
-	/* Get disk statics */
-	stat = disk_initialize(pdrv);
-	if (stat & STA_NOINIT) return FR_NOT_READY;
-	if (stat & STA_PROTECT) return FR_WRITE_PROTECTED;
-#if _MAX_SS != 512					/* Get disk sector size */
-	if (disk_ioctl(pdrv, GET_SECTOR_SIZE, &SS(fs)) != RES_OK || SS(fs) > _MAX_SS)
-		return FR_DISK_ERR;
-#endif
-	if (_MULTI_PARTITION && part) {
-		/* Get partition information from partition table in the MBR */
-		if (disk_read(pdrv, fs->win, 0, 1) != RES_OK) return FR_DISK_ERR;
-		if (LD_WORD(fs->win+BS_55AA) != 0xAA55) return FR_MKFS_ABORTED;
-		tbl = &fs->win[MBR_Table + (part - 1) * SZ_PTE];
-		if (!tbl[4]) return FR_MKFS_ABORTED;	/* No partition? */
-		b_vol = LD_DWORD(tbl+8);	/* Volume start sector */
-		n_vol = LD_DWORD(tbl+12);	/* Volume size */
-	} else {
-		/* Create a partition in this function */
-		if (disk_ioctl(pdrv, GET_SECTOR_COUNT, &n_vol) != RES_OK || n_vol < 128)
-			return FR_DISK_ERR;
-		b_vol = (sfd) ? 0 : 63;		/* Volume start sector */
-		n_vol -= b_vol;				/* Volume size */
-	}
-
-	if (!au) {				/* AU auto selection */
-		vs = n_vol / (2000 / (SS(fs) / 512));
-		for (i = 0; vs < vst[i]; i++) ;
-		au = cst[i];
-	}
-	au /= SS(fs);		/* Number of sectors per cluster */
-	if (au == 0) au = 1;
-	if (au > 128) au = 128;
-
-	/* Pre-compute number of clusters and FAT sub-type */
-	n_clst = n_vol / au;
-	fmt = FS_FAT12;
-	if (n_clst >= MIN_FAT16) fmt = FS_FAT16;
-	if (n_clst >= MIN_FAT32) fmt = FS_FAT32;
-
-	/* Determine offset and size of FAT structure */
-	if (fmt == FS_FAT32) {
-		n_fat = ((n_clst * 4) + 8 + SS(fs) - 1) / SS(fs);
-		n_rsv = 32;
-		n_dir = 0;
-	} else {
-		n_fat = (fmt == FS_FAT12) ? (n_clst * 3 + 1) / 2 + 3 : (n_clst * 2) + 4;
-		n_fat = (n_fat + SS(fs) - 1) / SS(fs);
-		n_rsv = 1;
-		n_dir = (DWORD)N_ROOTDIR * SZ_DIR / SS(fs);
-	}
-	b_fat = b_vol + n_rsv;				/* FAT area start sector */
-	b_dir = b_fat + n_fat * N_FATS;		/* Directory area start sector */
-	b_data = b_dir + n_dir;				/* Data area start sector */
-	if (n_vol < b_data + au - b_vol) return FR_MKFS_ABORTED;	/* Too small volume */
-
-	/* Align data start sector to erase block boundary (for flash memory media) */
-	if (disk_ioctl(pdrv, GET_BLOCK_SIZE, &n) != RES_OK || !n || n > 32768) n = 1;
-	n = (b_data + n - 1) & ~(n - 1);	/* Next nearest erase block from current data start */
-	n = (n - b_data) / N_FATS;
-	if (fmt == FS_FAT32) {		/* FAT32: Move FAT offset */
-		n_rsv += n;
-		b_fat += n;
-	} else {					/* FAT12/16: Expand FAT size */
-		n_fat += n;
-	}
-
-	/* Determine number of clusters and final check of validity of the FAT sub-type */
-	n_clst = (n_vol - n_rsv - n_fat * N_FATS - n_dir) / au;
-	if (   (fmt == FS_FAT16 && n_clst < MIN_FAT16)
-		|| (fmt == FS_FAT32 && n_clst < MIN_FAT32))
-		return FR_MKFS_ABORTED;
-
-	switch (fmt) {	/* Determine system ID for partition table */
-	case FS_FAT12:	sys = 0x01; break;
-	case FS_FAT16:	sys = (n_vol < 0x10000) ? 0x04 : 0x06; break;
-	default: 		sys = 0x0C;
-	}
-
-	if (_MULTI_PARTITION && part) {
-		/* Update system ID in the partition table */
-		tbl = &fs->win[MBR_Table + (part - 1) * SZ_PTE];
-		tbl[4] = sys;
-		if (disk_write(pdrv, fs->win, 0, 1) != RES_OK) return FR_DISK_ERR;
-		md = 0xF8;
-	} else {
-		if (sfd) {	/* No partition table (SFD) */
-			md = 0xF0;
-		} else {	/* Create partition table (FDISK) */
-			mem_set(fs->win, 0, SS(fs));
-			tbl = fs->win+MBR_Table;	/* Create partition table for single partition in the drive */
-			tbl[1] = 1;						/* Partition start head */
-			tbl[2] = 1;						/* Partition start sector */
-			tbl[3] = 0;						/* Partition start cylinder */
-			tbl[4] = sys;					/* System type */
-			tbl[5] = 254;					/* Partition end head */
-			n = (b_vol + n_vol) / 63 / 255;
-			tbl[6] = (BYTE)((n >> 2) | 63);	/* Partition end sector */
-			tbl[7] = (BYTE)n;				/* End cylinder */
-			ST_DWORD(tbl+8, 63);			/* Partition start in LBA */
-			ST_DWORD(tbl+12, n_vol);		/* Partition size in LBA */
-			ST_WORD(fs->win+BS_55AA, 0xAA55);	/* MBR signature */
-			if (disk_write(pdrv, fs->win, 0, 1) != RES_OK)	/* Write it to the MBR sector */
-				return FR_DISK_ERR;
-			md = 0xF8;
-		}
-	}
-
-	/* Create BPB in the VBR */
-	tbl = fs->win;							/* Clear sector */
-	mem_set(tbl, 0, SS(fs));
-	mem_cpy(tbl, "\xEB\xFE\x90" "MSDOS5.0", 11);/* Boot jump code, OEM name */
-	i = SS(fs);								/* Sector size */
-	ST_WORD(tbl+BPB_BytsPerSec, i);
-	tbl[BPB_SecPerClus] = (BYTE)au;			/* Sectors per cluster */
-	ST_WORD(tbl+BPB_RsvdSecCnt, n_rsv);		/* Reserved sectors */
-	tbl[BPB_NumFATs] = N_FATS;				/* Number of FATs */
-	i = (fmt == FS_FAT32) ? 0 : N_ROOTDIR;	/* Number of rootdir entries */
-	ST_WORD(tbl+BPB_RootEntCnt, i);
-	if (n_vol < 0x10000) {					/* Number of total sectors */
-		ST_WORD(tbl+BPB_TotSec16, n_vol);
-	} else {
-		ST_DWORD(tbl+BPB_TotSec32, n_vol);
-	}
-	tbl[BPB_Media] = md;					/* Media descriptor */
-	ST_WORD(tbl+BPB_SecPerTrk, 63);			/* Number of sectors per track */
-	ST_WORD(tbl+BPB_NumHeads, 255);			/* Number of heads */
-	ST_DWORD(tbl+BPB_HiddSec, b_vol);		/* Hidden sectors */
-	n = get_fattime();						/* Use current time as VSN */
-	if (fmt == FS_FAT32) {
-		ST_DWORD(tbl+BS_VolID32, n);		/* VSN */
-		ST_DWORD(tbl+BPB_FATSz32, n_fat);	/* Number of sectors per FAT */
-		ST_DWORD(tbl+BPB_RootClus, 2);		/* Root directory start cluster (2) */
-		ST_WORD(tbl+BPB_FSInfo, 1);			/* FSInfo record offset (VBR+1) */
-		ST_WORD(tbl+BPB_BkBootSec, 6);		/* Backup boot record offset (VBR+6) */
-		tbl[BS_DrvNum32] = 0x80;			/* Drive number */
-		tbl[BS_BootSig32] = 0x29;			/* Extended boot signature */
-		mem_cpy(tbl+BS_VolLab32, "NO NAME    " "FAT32   ", 19);	/* Volume label, FAT signature */
-	} else {
-		ST_DWORD(tbl+BS_VolID, n);			/* VSN */
-		ST_WORD(tbl+BPB_FATSz16, n_fat);	/* Number of sectors per FAT */
-		tbl[BS_DrvNum] = 0x80;				/* Drive number */
-		tbl[BS_BootSig] = 0x29;				/* Extended boot signature */
-		mem_cpy(tbl+BS_VolLab, "NO NAME    " "FAT     ", 19);	/* Volume label, FAT signature */
-	}
-	ST_WORD(tbl+BS_55AA, 0xAA55);			/* Signature (Offset is fixed here regardless of sector size) */
-	if (disk_write(pdrv, tbl, b_vol, 1) != RES_OK)	/* Write it to the VBR sector */
-		return FR_DISK_ERR;
-	if (fmt == FS_FAT32)							/* Write backup VBR if needed (VBR+6) */
-		disk_write(pdrv, tbl, b_vol + 6, 1);
-
-	/* Initialize FAT area */
-	wsect = b_fat;
-	for (i = 0; i < N_FATS; i++) {		/* Initialize each FAT copy */
-		mem_set(tbl, 0, SS(fs));			/* 1st sector of the FAT  */
-		n = md;								/* Media descriptor byte */
-		if (fmt != FS_FAT32) {
-			n |= (fmt == FS_FAT12) ? 0x00FFFF00 : 0xFFFFFF00;
-			ST_DWORD(tbl+0, n);				/* Reserve cluster #0-1 (FAT12/16) */
-		} else {
-			n |= 0xFFFFFF00;
-			ST_DWORD(tbl+0, n);				/* Reserve cluster #0-1 (FAT32) */
-			ST_DWORD(tbl+4, 0xFFFFFFFF);
-			ST_DWORD(tbl+8, 0x0FFFFFFF);	/* Reserve cluster #2 for root dir */
-		}
-		if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK)
-			return FR_DISK_ERR;
-		mem_set(tbl, 0, SS(fs));			/* Fill following FAT entries with zero */
-		for (n = 1; n < n_fat; n++) {		/* This loop may take a time on FAT32 volume due to many single sector writes */
-			if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK)
-				return FR_DISK_ERR;
-		}
-	}
-
-	/* Initialize root directory */
-	i = (fmt == FS_FAT32) ? au : n_dir;
-	do {
-		if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK)
-			return FR_DISK_ERR;
-	} while (--i);
-
-#if _USE_ERASE	/* Erase data area if needed */
-	{
-		DWORD eb[2];
-
-		eb[0] = wsect; eb[1] = wsect + (n_clst - ((fmt == FS_FAT32) ? 1 : 0)) * au - 1;
-		disk_ioctl(pdrv, CTRL_ERASE_SECTOR, eb);
-	}
-#endif
-
-	/* Create FSInfo if needed */
-	if (fmt == FS_FAT32) {
-		ST_DWORD(tbl+FSI_LeadSig, 0x41615252);
-		ST_DWORD(tbl+FSI_StrucSig, 0x61417272);
-		ST_DWORD(tbl+FSI_Free_Count, n_clst - 1);	/* Number of free clusters */
-		ST_DWORD(tbl+FSI_Nxt_Free, 2);				/* Last allocated cluster# */
-		ST_WORD(tbl+BS_55AA, 0xAA55);
-		disk_write(pdrv, tbl, b_vol + 1, 1);	/* Write original (VBR+1) */
-		disk_write(pdrv, tbl, b_vol + 7, 1);	/* Write backup (VBR+7) */
-	}
-
-	return (disk_ioctl(pdrv, CTRL_SYNC, 0) == RES_OK) ? FR_OK : FR_DISK_ERR;
-}
-
-
-#if _MULTI_PARTITION == 2
-/*-----------------------------------------------------------------------*/
-/* Divide Physical Drive                                                 */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_fdisk (
-	BYTE pdrv,			/* Physical drive number */
-	const DWORD szt[],	/* Pointer to the size table for each partitions */
-	void* work			/* Pointer to the working buffer */
-)
-{
-	UINT i, n, sz_cyl, tot_cyl, b_cyl, e_cyl, p_cyl;
-	BYTE s_hd, e_hd, *p, *buf = (BYTE*)work;
-	DSTATUS stat;
-	DWORD sz_disk, sz_part, s_part;
-
-
-	stat = disk_initialize(pdrv);
-	if (stat & STA_NOINIT) return FR_NOT_READY;
-	if (stat & STA_PROTECT) return FR_WRITE_PROTECTED;
-	if (disk_ioctl(pdrv, GET_SECTOR_COUNT, &sz_disk)) return FR_DISK_ERR;
-
-	/* Determine CHS in the table regardless of the drive geometry */
-	for (n = 16; n < 256 && sz_disk / n / 63 > 1024; n *= 2) ;
-	if (n == 256) n--;
-	e_hd = n - 1;
-	sz_cyl = 63 * n;
-	tot_cyl = sz_disk / sz_cyl;
-
-	/* Create partition table */
-	mem_set(buf, 0, _MAX_SS);
-	p = buf + MBR_Table; b_cyl = 0;
-	for (i = 0; i < 4; i++, p += SZ_PTE) {
-		p_cyl = (szt[i] <= 100) ? (DWORD)tot_cyl * szt[i] / 100 : szt[i] / sz_cyl;
-		if (!p_cyl) continue;
-		s_part = (DWORD)sz_cyl * b_cyl;
-		sz_part = (DWORD)sz_cyl * p_cyl;
-		if (i == 0) {	/* Exclude first track of cylinder 0 */
-			s_hd = 1;
-			s_part += 63; sz_part -= 63;
-		} else {
-			s_hd = 0;
-		}
-		e_cyl = b_cyl + p_cyl - 1;
-		if (e_cyl >= tot_cyl) return FR_INVALID_PARAMETER;
-
-		/* Set partition table */
-		p[1] = s_hd;						/* Start head */
-		p[2] = (BYTE)((b_cyl >> 2) + 1);	/* Start sector */
-		p[3] = (BYTE)b_cyl;					/* Start cylinder */
-		p[4] = 0x06;						/* System type (temporary setting) */
-		p[5] = e_hd;						/* End head */
-		p[6] = (BYTE)((e_cyl >> 2) + 63);	/* End sector */
-		p[7] = (BYTE)e_cyl;					/* End cylinder */
-		ST_DWORD(p + 8, s_part);			/* Start sector in LBA */
-		ST_DWORD(p + 12, sz_part);			/* Partition size */
-
-		/* Next partition */
-		b_cyl += p_cyl;
-	}
-	ST_WORD(p, 0xAA55);
-
-	/* Write it to the MBR */
-	return (disk_write(pdrv, buf, 0, 1) || disk_ioctl(pdrv, CTRL_SYNC, 0)) ? FR_DISK_ERR : FR_OK;
-}
-
-
-#endif /* _MULTI_PARTITION == 2 */
-#endif /* _USE_MKFS && !_FS_READONLY */
-
-
-
-
-#if _USE_STRFUNC
-/*-----------------------------------------------------------------------*/
-/* Get a string from the file                                            */
-/*-----------------------------------------------------------------------*/
-TCHAR* f_gets (
-	TCHAR* buff,	/* Pointer to the string buffer to read */
-	int len,		/* Size of string buffer (characters) */
-	FIL* fil		/* Pointer to the file object */
-)
-{
-	int n = 0;
-	TCHAR c, *p = buff;
-	BYTE s[2];
-	UINT rc;
-
-
-	while (n < len - 1) {			/* Read bytes until buffer gets filled */
-		f_read(fil, s, 1, &rc);
-		if (rc != 1) break;			/* Break on EOF or error */
-		c = s[0];
-#if _LFN_UNICODE					/* Read a character in UTF-8 encoding */
-		if (c >= 0x80) {
-			if (c < 0xC0) continue;	/* Skip stray trailer */
-			if (c < 0xE0) {			/* Two-byte sequence */
-				f_read(fil, s, 1, &rc);
-				if (rc != 1) break;
-				c = ((c & 0x1F) << 6) | (s[0] & 0x3F);
-				if (c < 0x80) c = '?';
-			} else {
-				if (c < 0xF0) {		/* Three-byte sequence */
-					f_read(fil, s, 2, &rc);
-					if (rc != 2) break;
-					c = (c << 12) | ((s[0] & 0x3F) << 6) | (s[1] & 0x3F);
-					if (c < 0x800) c = '?';
-				} else {			/* Reject four-byte sequence */
-					c = '?';
-				}
-			}
-		}
-#endif
-#if _USE_STRFUNC >= 2
-		if (c == '\r') continue;	/* Strip '\r' */
-#endif
-		*p++ = c;
-		n++;
-		if (c == '\n') break;		/* Break on EOL */
-	}
-	*p = 0;
-	return n ? buff : 0;			/* When no data read (eof or error), return with error. */
-}
-
-
-
-#if !_FS_READONLY
-#include <stdarg.h>
-/*-----------------------------------------------------------------------*/
-/* Put a character to the file                                           */
-/*-----------------------------------------------------------------------*/
-int f_putc (
-	TCHAR c,	/* A character to be output */
-	FIL* fil	/* Pointer to the file object */
-)
-{
-	UINT bw, btw;
-	BYTE s[3];
-
-
-#if _USE_STRFUNC >= 2
-	if (c == '\n') f_putc ('\r', fil);	/* LF -> CRLF conversion */
-#endif
-
-#if _LFN_UNICODE	/* Write the character in UTF-8 encoding */
-	if (c < 0x80) {			/* 7-bit */
-		s[0] = (BYTE)c;
-		btw = 1;
-	} else {
-		if (c < 0x800) {	/* 11-bit */
-			s[0] = (BYTE)(0xC0 | (c >> 6));
-			s[1] = (BYTE)(0x80 | (c & 0x3F));
-			btw = 2;
-		} else {			/* 16-bit */
-			s[0] = (BYTE)(0xE0 | (c >> 12));
-			s[1] = (BYTE)(0x80 | ((c >> 6) & 0x3F));
-			s[2] = (BYTE)(0x80 | (c & 0x3F));
-			btw = 3;
-		}
-	}
-#else				/* Write the character without conversion */
-	s[0] = (BYTE)c;
-	btw = 1;
-#endif
-	f_write(fil, s, btw, &bw);		/* Write the char to the file */
-	return (bw == btw) ? 1 : EOF;	/* Return the result */
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Put a string to the file                                              */
-/*-----------------------------------------------------------------------*/
-int f_puts (
-	const TCHAR* str,	/* Pointer to the string to be output */
-	FIL* fil			/* Pointer to the file object */
-)
-{
-	int n;
-
-
-	for (n = 0; *str; str++, n++) {
-		if (f_putc(*str, fil) == EOF) return EOF;
-	}
-	return n;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Put a formatted string to the file                                    */
-/*-----------------------------------------------------------------------*/
-int f_printf (
-	FIL* fil,			/* Pointer to the file object */
-	const TCHAR* str,	/* Pointer to the format string */
-	...					/* Optional arguments... */
-)
-{
-	va_list arp;
-	BYTE f, r;
-	UINT i, j, w;
-	ULONG v;
-	TCHAR c, d, s[16], *p;
-	int res, chc, cc;
-
-
-	va_start(arp, str);
-
-	for (cc = res = 0; cc != EOF; res += cc) {
-		c = *str++;
-		if (c == 0) break;			/* End of string */
-		if (c != '%') {				/* Non escape character */
-			cc = f_putc(c, fil);
-			if (cc != EOF) cc = 1;
-			continue;
-		}
-		w = f = 0;
-		c = *str++;
-		if (c == '0') {				/* Flag: '0' padding */
-			f = 1; c = *str++;
-		} else {
-			if (c == '-') {			/* Flag: left justified */
-				f = 2; c = *str++;
-			}
-		}
-		while (IsDigit(c)) {		/* Precision */
-			w = w * 10 + c - '0';
-			c = *str++;
-		}
-		if (c == 'l' || c == 'L') {	/* Prefix: Size is long int */
-			f |= 4; c = *str++;
-		}
-		if (!c) break;
-		d = c;
-		if (IsLower(d)) d -= 0x20;
-		switch (d) {				/* Type is... */
-		case 'S' :					/* String */
-			p = va_arg(arp, TCHAR*);
-			for (j = 0; p[j]; j++) ;
-			chc = 0;
-			if (!(f & 2)) {
-				while (j++ < w) chc += (cc = f_putc(' ', fil));
-			}
-			chc += (cc = f_puts(p, fil));
-			while (j++ < w) chc += (cc = f_putc(' ', fil));
-			if (cc != EOF) cc = chc;
-			continue;
-		case 'C' :					/* Character */
-			cc = f_putc((TCHAR)va_arg(arp, int), fil); continue;
-		case 'B' :					/* Binary */
-			r = 2; break;
-		case 'O' :					/* Octal */
-			r = 8; break;
-		case 'D' :					/* Signed decimal */
-		case 'U' :					/* Unsigned decimal */
-			r = 10; break;
-		case 'X' :					/* Hexdecimal */
-			r = 16; break;
-		default:					/* Unknown type (pass-through) */
-			cc = f_putc(c, fil); continue;
-		}
-
-		/* Get an argument and put it in numeral */
-		v = (f & 4) ? (ULONG)va_arg(arp, long) : ((d == 'D') ? (ULONG)(long)va_arg(arp, int) : (ULONG)va_arg(arp, unsigned int));
-		if (d == 'D' && (v & 0x80000000)) {
-			v = 0 - v;
-			f |= 8;
-		}
-		i = 0;
-		do {
-			d = (TCHAR)(v % r); v /= r;
-			if (d > 9) d += (c == 'x') ? 0x27 : 0x07;
-			s[i++] = d + '0';
-		} while (v && i < sizeof s / sizeof s[0]);
-		if (f & 8) s[i++] = '-';
-		j = i; d = (f & 1) ? '0' : ' ';
-		res = 0;
-		while (!(f & 2) && j++ < w) res += (cc = f_putc(d, fil));
-		do res += (cc = f_putc(s[--i], fil)); while(i);
-		while (j++ < w) res += (cc = f_putc(' ', fil));
-		if (cc != EOF) cc = res;
-	}
-
-	va_end(arp);
-	return (cc == EOF) ? cc : res;
-}
-
-#endif /* !_FS_READONLY */
-#endif /* _USE_STRFUNC */
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/ff.h b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/ff.h
deleted file mode 100644
index 627cbaabe6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/ff.h
+++ /dev/null
@@ -1,337 +0,0 @@
-/*---------------------------------------------------------------------------/
-/  FatFs - FAT file system module include file  R0.09a    (C)ChaN, 2012
-/----------------------------------------------------------------------------/
-/ FatFs module is a generic FAT file system module for small embedded systems.
-/ This is a free software that opened for education, research and commercial
-/ developments under license policy of following terms.
-/
-/  Copyright (C) 2012, ChaN, all right reserved.
-/
-/ * The FatFs module is a free software and there is NO WARRANTY.
-/ * No restriction on use. You can use, modify and redistribute it for
-/   personal, non-profit or commercial product UNDER YOUR RESPONSIBILITY.
-/ * Redistributions of source code must retain the above copyright notice.
-/
-/----------------------------------------------------------------------------*/
-
-#ifndef _FATFS
-#define _FATFS	4004	/* Revision ID */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include "integer.h"	/* Basic integer types */
-#include "ffconf.h"		/* FatFs configuration options */
-
-#if _FATFS != _FFCONF
-#error Wrong configuration file (ffconf.h).
-#endif
-
-
-
-/* Definitions of volume management */
-
-#if _MULTI_PARTITION		/* Multiple partition configuration */
-typedef struct {
-	BYTE pd;	/* Physical drive number */
-	BYTE pt;	/* Partition: 0:Auto detect, 1-4:Forced partition) */
-} PARTITION;
-extern PARTITION VolToPart[];	/* Volume - Partition resolution table */
-#define LD2PD(vol) (VolToPart[vol].pd)	/* Get physical drive number */
-#define LD2PT(vol) (VolToPart[vol].pt)	/* Get partition index */
-
-#else							/* Single partition configuration */
-#define LD2PD(vol) (BYTE)(vol)	/* Each logical drive is bound to the same physical drive number */
-#define LD2PT(vol) 0			/* Always mounts the 1st partition or in SFD */
-
-#endif
-
-
-
-/* Type of path name strings on FatFs API */
-
-#if _LFN_UNICODE			/* Unicode string */
-#if !_USE_LFN
-#error _LFN_UNICODE must be 0 in non-LFN cfg.
-#endif
-#ifndef _INC_TCHAR
-typedef WCHAR TCHAR;
-#define _T(x) L ## x
-#define _TEXT(x) L ## x
-#endif
-
-#else						/* ANSI/OEM string */
-#ifndef _INC_TCHAR
-typedef char TCHAR;
-#define _T(x) x
-#define _TEXT(x) x
-#endif
-
-#endif
-
-
-
-/* File system object structure (FATFS) */
-
-typedef struct {
-	BYTE	fs_type;		/* FAT sub-type (0:Not mounted) */
-	BYTE	drv;			/* Physical drive number */
-	BYTE	csize;			/* Sectors per cluster (1,2,4...128) */
-	BYTE	n_fats;			/* Number of FAT copies (1,2) */
-	BYTE	wflag;			/* win[] dirty flag (1:must be written back) */
-	BYTE	fsi_flag;		/* fsinfo dirty flag (1:must be written back) */
-	WORD	id;				/* File system mount ID */
-	WORD	n_rootdir;		/* Number of root directory entries (FAT12/16) */
-#if _MAX_SS != 512
-	WORD	ssize;			/* Bytes per sector (512, 1024, 2048 or 4096) */
-#endif
-#if _FS_REENTRANT
-	_SYNC_t	sobj;			/* Identifier of sync object */
-#endif
-#if !_FS_READONLY
-	DWORD	last_clust;		/* Last allocated cluster */
-	DWORD	free_clust;		/* Number of free clusters */
-	DWORD	fsi_sector;		/* fsinfo sector (FAT32) */
-#endif
-#if _FS_RPATH
-	DWORD	cdir;			/* Current directory start cluster (0:root) */
-#endif
-	DWORD	n_fatent;		/* Number of FAT entries (= number of clusters + 2) */
-	DWORD	fsize;			/* Sectors per FAT */
-	DWORD	fatbase;		/* FAT start sector */
-	DWORD	dirbase;		/* Root directory start sector (FAT32:Cluster#) */
-	DWORD	database;		/* Data start sector */
-	DWORD	winsect;		/* Current sector appearing in the win[] */
-	BYTE	win[_MAX_SS];	/* Disk access window for Directory, FAT (and Data on tiny cfg) */
-} FATFS;
-
-
-
-/* File object structure (FIL) */
-
-typedef struct {
-	FATFS*	fs;				/* Pointer to the related file system object */
-	WORD	id;				/* File system mount ID of the related file system object */
-	BYTE	flag;			/* File status flags */
-	BYTE	pad1;
-	DWORD	fptr;			/* File read/write pointer (0ed on file open) */
-	DWORD	fsize;			/* File size */
-	DWORD	sclust;			/* File data start cluster (0:no data cluster, always 0 when fsize is 0) */
-	DWORD	clust;			/* Current cluster of fpter */
-	DWORD	dsect;			/* Current data sector of fpter */
-#if !_FS_READONLY
-	DWORD	dir_sect;		/* Sector containing the directory entry */
-	BYTE*	dir_ptr;		/* Pointer to the directory entry in the window */
-#endif
-#if _USE_FASTSEEK
-	DWORD*	cltbl;			/* Pointer to the cluster link map table (null on file open) */
-#endif
-#if _FS_LOCK
-	UINT	lockid;			/* File lock ID (index of file semaphore table Files[]) */
-#endif
-#if !_FS_TINY
-	BYTE	buf[_MAX_SS];	/* File data read/write buffer */
-#endif
-} FIL;
-
-
-
-/* Directory object structure (DIR) */
-
-typedef struct {
-	FATFS*	fs;				/* Pointer to the owner file system object */
-	WORD	id;				/* Owner file system mount ID */
-	WORD	index;			/* Current read/write index number */
-	DWORD	sclust;			/* Table start cluster (0:Root dir) */
-	DWORD	clust;			/* Current cluster */
-	DWORD	sect;			/* Current sector */
-	BYTE*	dir;			/* Pointer to the current SFN entry in the win[] */
-	BYTE*	fn;				/* Pointer to the SFN (in/out) {file[8],ext[3],status[1]} */
-#if _USE_LFN
-	WCHAR*	lfn;			/* Pointer to the LFN working buffer */
-	WORD	lfn_idx;		/* Last matched LFN index number (0xFFFF:No LFN) */
-#endif
-} DIR;
-
-
-
-/* File status structure (FILINFO) */
-
-typedef struct {
-	DWORD	fsize;			/* File size */
-	WORD	fdate;			/* Last modified date */
-	WORD	ftime;			/* Last modified time */
-	BYTE	fattrib;		/* Attribute */
-	TCHAR	fname[13];		/* Short file name (8.3 format) */
-#if _USE_LFN
-	TCHAR*	lfname;			/* Pointer to the LFN buffer */
-	UINT 	lfsize;			/* Size of LFN buffer in TCHAR */
-#endif
-} FILINFO;
-
-
-
-/* File function return code (FRESULT) */
-
-typedef enum {
-	FR_OK = 0,				/* (0) Succeeded */
-	FR_DISK_ERR,			/* (1) A hard error occurred in the low level disk I/O layer */
-	FR_INT_ERR,				/* (2) Assertion failed */
-	FR_NOT_READY,			/* (3) The physical drive cannot work */
-	FR_NO_FILE,				/* (4) Could not find the file */
-	FR_NO_PATH,				/* (5) Could not find the path */
-	FR_INVALID_NAME,		/* (6) The path name format is invalid */
-	FR_DENIED,				/* (7) Access denied due to prohibited access or directory full */
-	FR_EXIST,				/* (8) Access denied due to prohibited access */
-	FR_INVALID_OBJECT,		/* (9) The file/directory object is invalid */
-	FR_WRITE_PROTECTED,		/* (10) The physical drive is write protected */
-	FR_INVALID_DRIVE,		/* (11) The logical drive number is invalid */
-	FR_NOT_ENABLED,			/* (12) The volume has no work area */
-	FR_NO_FILESYSTEM,		/* (13) There is no valid FAT volume */
-	FR_MKFS_ABORTED,		/* (14) The f_mkfs() aborted due to any parameter error */
-	FR_TIMEOUT,				/* (15) Could not get a grant to access the volume within defined period */
-	FR_LOCKED,				/* (16) The operation is rejected according to the file sharing policy */
-	FR_NOT_ENOUGH_CORE,		/* (17) LFN working buffer could not be allocated */
-	FR_TOO_MANY_OPEN_FILES,	/* (18) Number of open files > _FS_SHARE */
-	FR_INVALID_PARAMETER	/* (19) Given parameter is invalid */
-} FRESULT;
-
-
-
-/*--------------------------------------------------------------*/
-/* FatFs module application interface                           */
-
-FRESULT f_mount (BYTE, FATFS*);						/* Mount/Unmount a logical drive */
-FRESULT f_open (FIL*, const TCHAR*, BYTE);			/* Open or create a file */
-FRESULT f_read (FIL*, void*, UINT, UINT*);			/* Read data from a file */
-FRESULT f_lseek (FIL*, DWORD);						/* Move file pointer of a file object */
-FRESULT f_close (FIL*);								/* Close an open file object */
-FRESULT f_opendir (DIR*, const TCHAR*);				/* Open an existing directory */
-FRESULT f_readdir (DIR*, FILINFO*);					/* Read a directory item */
-FRESULT f_stat (const TCHAR*, FILINFO*);			/* Get file status */
-FRESULT f_write (FIL*, const void*, UINT, UINT*);	/* Write data to a file */
-FRESULT f_getfree (const TCHAR*, DWORD*, FATFS**);	/* Get number of free clusters on the drive */
-FRESULT f_truncate (FIL*);							/* Truncate file */
-FRESULT f_sync (FIL*);								/* Flush cached data of a writing file */
-FRESULT f_unlink (const TCHAR*);					/* Delete an existing file or directory */
-FRESULT	f_mkdir (const TCHAR*);						/* Create a new directory */
-FRESULT f_chmod (const TCHAR*, BYTE, BYTE);			/* Change attribute of the file/dir */
-FRESULT f_utime (const TCHAR*, const FILINFO*);		/* Change times-tamp of the file/dir */
-FRESULT f_rename (const TCHAR*, const TCHAR*);		/* Rename/Move a file or directory */
-FRESULT f_chdrive (BYTE);							/* Change current drive */
-FRESULT f_chdir (const TCHAR*);						/* Change current directory */
-FRESULT f_getcwd (TCHAR*, UINT);					/* Get current directory */
-FRESULT f_forward (FIL*, UINT(*)(const BYTE*,UINT), UINT, UINT*);	/* Forward data to the stream */
-FRESULT f_mkfs (BYTE, BYTE, UINT);					/* Create a file system on the drive */
-FRESULT	f_fdisk (BYTE, const DWORD[], void*);		/* Divide a physical drive into some partitions */
-int f_putc (TCHAR, FIL*);							/* Put a character to the file */
-int f_puts (const TCHAR*, FIL*);					/* Put a string to the file */
-int f_printf (FIL*, const TCHAR*, ...);				/* Put a formatted string to the file */
-TCHAR* f_gets (TCHAR*, int, FIL*);					/* Get a string from the file */
-
-#define f_eof(fp) (((fp)->fptr == (fp)->fsize) ? 1 : 0)
-#define f_error(fp) (((fp)->flag & FA__ERROR) ? 1 : 0)
-#define f_tell(fp) ((fp)->fptr)
-#define f_size(fp) ((fp)->fsize)
-
-#ifndef EOF
-#define EOF (-1)
-#endif
-
-
-
-
-/*--------------------------------------------------------------*/
-/* Additional user defined functions                            */
-
-/* RTC function */
-#if !_FS_READONLY
-DWORD get_fattime (void);
-#endif
-
-/* Unicode support functions */
-#if _USE_LFN						/* Unicode - OEM code conversion */
-WCHAR ff_convert (WCHAR, UINT);		/* OEM-Unicode bidirectional conversion */
-WCHAR ff_wtoupper (WCHAR);			/* Unicode upper-case conversion */
-#if _USE_LFN == 3					/* Memory functions */
-void* ff_memalloc (UINT);			/* Allocate memory block */
-void ff_memfree (void*);			/* Free memory block */
-#endif
-#endif
-
-/* Sync functions */
-#if _FS_REENTRANT
-int ff_cre_syncobj (BYTE, _SYNC_t*);/* Create a sync object */
-int ff_req_grant (_SYNC_t);			/* Lock sync object */
-void ff_rel_grant (_SYNC_t);		/* Unlock sync object */
-int ff_del_syncobj (_SYNC_t);		/* Delete a sync object */
-#endif
-
-
-
-
-/*--------------------------------------------------------------*/
-/* Flags and offset address                                     */
-
-
-/* File access control and file status flags (FIL.flag) */
-
-#define	FA_READ				0x01
-#define	FA_OPEN_EXISTING	0x00
-#define FA__ERROR			0x80
-
-#if !_FS_READONLY
-#define	FA_WRITE			0x02
-#define	FA_CREATE_NEW		0x04
-#define	FA_CREATE_ALWAYS	0x08
-#define	FA_OPEN_ALWAYS		0x10
-#define FA__WRITTEN			0x20
-#define FA__DIRTY			0x40
-#endif
-
-
-/* FAT sub type (FATFS.fs_type) */
-
-#define FS_FAT12	1
-#define FS_FAT16	2
-#define FS_FAT32	3
-
-
-/* File attribute bits for directory entry */
-
-#define	AM_RDO	0x01	/* Read only */
-#define	AM_HID	0x02	/* Hidden */
-#define	AM_SYS	0x04	/* System */
-#define	AM_VOL	0x08	/* Volume label */
-#define AM_LFN	0x0F	/* LFN entry */
-#define AM_DIR	0x10	/* Directory */
-#define AM_ARC	0x20	/* Archive */
-#define AM_MASK	0x3F	/* Mask of defined bits */
-
-
-/* Fast seek feature */
-#define CREATE_LINKMAP	0xFFFFFFFF
-
-
-
-/*--------------------------------*/
-/* Multi-byte word access macros  */
-
-#if _WORD_ACCESS == 1	/* Enable word access to the FAT structure */
-#define	LD_WORD(ptr)		(WORD)(*(WORD*)(BYTE*)(ptr))
-#define	LD_DWORD(ptr)		(DWORD)(*(DWORD*)(BYTE*)(ptr))
-#define	ST_WORD(ptr,val)	*(WORD*)(BYTE*)(ptr)=(WORD)(val)
-#define	ST_DWORD(ptr,val)	*(DWORD*)(BYTE*)(ptr)=(DWORD)(val)
-#else					/* Use byte-by-byte access to the FAT structure */
-#define	LD_WORD(ptr)		(WORD)(((WORD)*((BYTE*)(ptr)+1)<<8)|(WORD)*(BYTE*)(ptr))
-#define	LD_DWORD(ptr)		(DWORD)(((DWORD)*((BYTE*)(ptr)+3)<<24)|((DWORD)*((BYTE*)(ptr)+2)<<16)|((WORD)*((BYTE*)(ptr)+1)<<8)|*(BYTE*)(ptr))
-#define	ST_WORD(ptr,val)	*(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8)
-#define	ST_DWORD(ptr,val)	*(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8); *((BYTE*)(ptr)+2)=(BYTE)((DWORD)(val)>>16); *((BYTE*)(ptr)+3)=(BYTE)((DWORD)(val)>>24)
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _FATFS */
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/ffconf.h b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/ffconf.h
deleted file mode 100644
index 63a4e78236..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/ffconf.h
+++ /dev/null
@@ -1,191 +0,0 @@
-/*---------------------------------------------------------------------------/
-/  FatFs - FAT file system module configuration file  R0.09a (C)ChaN, 2012
-/----------------------------------------------------------------------------/
-/
-/ CAUTION! Do not forget to make clean the project after any changes to
-/ the configuration options.
-/
-/----------------------------------------------------------------------------*/
-#ifndef _FFCONF
-#define _FFCONF 4004	/* Revision ID */
-
-
-/*---------------------------------------------------------------------------/
-/ Function and Buffer Configurations
-/----------------------------------------------------------------------------*/
-
-#define	_FS_TINY	1		/* 0:Normal or 1:Tiny */
-/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system
-/  object instead of the sector buffer in the individual file object for file
-/  data transfer. This reduces memory consumption 512 bytes each file object. */
-
-
-#define _FS_READONLY	0	/* 0:Read/Write or 1:Read only */
-/* Setting _FS_READONLY to 1 defines read only configuration. This removes
-/  writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename,
-/  f_truncate and useless f_getfree. */
-
-
-#define _FS_MINIMIZE	2	/* 0 to 3 */
-/* The _FS_MINIMIZE option defines minimization level to remove some functions.
-/
-/   0: Full function.
-/   1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename
-/      are removed.
-/   2: f_opendir and f_readdir are removed in addition to 1.
-/   3: f_lseek is removed in addition to 2. */
-
-
-#define	_USE_STRFUNC	0	/* 0:Disable or 1-2:Enable */
-/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
-
-
-#define	_USE_MKFS	0		/* 0:Disable or 1:Enable */
-/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */
-
-
-#define	_USE_FORWARD	0	/* 0:Disable or 1:Enable */
-/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
-
-
-#define	_USE_FASTSEEK	0	/* 0:Disable or 1:Enable */
-/* To enable fast seek feature, set _USE_FASTSEEK to 1. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ Locale and Namespace Configurations
-/----------------------------------------------------------------------------*/
-
-#define _CODE_PAGE	932
-/* The _CODE_PAGE specifies the OEM code page to be used on the target system.
-/  Incorrect setting of the code page can cause a file open failure.
-/
-/   932  - Japanese Shift-JIS (DBCS, OEM, Windows)
-/   936  - Simplified Chinese GBK (DBCS, OEM, Windows)
-/   949  - Korean (DBCS, OEM, Windows)
-/   950  - Traditional Chinese Big5 (DBCS, OEM, Windows)
-/   1250 - Central Europe (Windows)
-/   1251 - Cyrillic (Windows)
-/   1252 - Latin 1 (Windows)
-/   1253 - Greek (Windows)
-/   1254 - Turkish (Windows)
-/   1255 - Hebrew (Windows)
-/   1256 - Arabic (Windows)
-/   1257 - Baltic (Windows)
-/   1258 - Vietnam (OEM, Windows)
-/   437  - U.S. (OEM)
-/   720  - Arabic (OEM)
-/   737  - Greek (OEM)
-/   775  - Baltic (OEM)
-/   850  - Multilingual Latin 1 (OEM)
-/   858  - Multilingual Latin 1 + Euro (OEM)
-/   852  - Latin 2 (OEM)
-/   855  - Cyrillic (OEM)
-/   866  - Russian (OEM)
-/   857  - Turkish (OEM)
-/   862  - Hebrew (OEM)
-/   874  - Thai (OEM, Windows)
-/	1    - ASCII only (Valid for non LFN cfg.)
-*/
-
-
-#define	_USE_LFN	0		/* 0 to 3 */
-#define	_MAX_LFN	255		/* Maximum LFN length to handle (12 to 255) */
-/* The _USE_LFN option switches the LFN support.
-/
-/   0: Disable LFN feature. _MAX_LFN and _LFN_UNICODE have no effect.
-/   1: Enable LFN with static working buffer on the BSS. Always NOT reentrant.
-/   2: Enable LFN with dynamic working buffer on the STACK.
-/   3: Enable LFN with dynamic working buffer on the HEAP.
-/
-/  The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. To enable LFN,
-/  Unicode handling functions ff_convert() and ff_wtoupper() must be added
-/  to the project. When enable to use heap, memory control functions
-/  ff_memalloc() and ff_memfree() must be added to the project. */
-
-
-#define	_LFN_UNICODE	0	/* 0:ANSI/OEM or 1:Unicode */
-/* To switch the character code set on FatFs API to Unicode,
-/  enable LFN feature and set _LFN_UNICODE to 1. */
-
-
-#define _FS_RPATH		0	/* 0 to 2 */
-/* The _FS_RPATH option configures relative path feature.
-/
-/   0: Disable relative path feature and remove related functions.
-/   1: Enable relative path. f_chdrive() and f_chdir() are available.
-/   2: f_getcwd() is available in addition to 1.
-/
-/  Note that output of the f_readdir fnction is affected by this option. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ Physical Drive Configurations
-/----------------------------------------------------------------------------*/
-
-#define _VOLUMES	1
-/* Number of volumes (logical drives) to be used. */
-
-
-#define	_MAX_SS		512		/* 512, 1024, 2048 or 4096 */
-/* Maximum sector size to be handled.
-/  Always set 512 for memory card and hard disk but a larger value may be
-/  required for on-board flash memory, floppy disk and optical disk.
-/  When _MAX_SS is larger than 512, it configures FatFs to variable sector size
-/  and GET_SECTOR_SIZE command must be implememted to the disk_ioctl function. */
-
-
-#define	_MULTI_PARTITION	0	/* 0:Single partition, 1/2:Enable multiple partition */
-/* When set to 0, each volume is bound to the same physical drive number and
-/ it can mount only first primaly partition. When it is set to 1, each volume
-/ is tied to the partitions listed in VolToPart[]. */
-
-
-#define	_USE_ERASE	0	/* 0:Disable or 1:Enable */
-/* To enable sector erase feature, set _USE_ERASE to 1. CTRL_ERASE_SECTOR command
-/  should be added to the disk_ioctl functio. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ System Configurations
-/----------------------------------------------------------------------------*/
-
-#define _WORD_ACCESS	1	/* 0 or 1 */
-/* Set 0 first and it is always compatible with all platforms. The _WORD_ACCESS
-/  option defines which access method is used to the word data on the FAT volume.
-/
-/   0: Byte-by-byte access.
-/   1: Word access. Do not choose this unless following condition is met.
-/
-/  When the byte order on the memory is big-endian or address miss-aligned word
-/  access results incorrect behavior, the _WORD_ACCESS must be set to 0.
-/  If it is not the case, the value can also be set to 1 to improve the
-/  performance and code size.
-*/
-
-
-/* A header file that defines sync object types on the O/S, such as
-/  windows.h, ucos_ii.h and semphr.h, must be included prior to ff.h. */
-
-#define _FS_REENTRANT	0		/* 0:Disable or 1:Enable */
-#define _FS_TIMEOUT		1000	/* Timeout period in unit of time ticks */
-#define	_SYNC_t			HANDLE	/* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */
-
-/* The _FS_REENTRANT option switches the reentrancy (thread safe) of the FatFs module.
-/
-/   0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect.
-/   1: Enable reentrancy. Also user provided synchronization handlers,
-/      ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj
-/      function must be added to the project. */
-
-
-#define	_FS_LOCK	0	/* 0:Disable or >=1:Enable */
-/* To enable file lock control feature, set _FS_LOCK to 1 or greater.
-   The value defines how many files can be opened simultaneously. */
-
-
-#endif /* _FFCONFIG */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/integer.h b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/integer.h
deleted file mode 100644
index 5408fe6b3e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/FATFs/integer.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*-------------------------------------------*/
-/* Integer type definitions for FatFs module */
-/*-------------------------------------------*/
-
-#ifndef _INTEGER
-#define _INTEGER
-
-#ifdef _WIN32	/* FatFs development platform */
-
-#include <windows.h>
-#include <tchar.h>
-
-#else			/* Embedded platform */
-
-/* These types must be 16-bit, 32-bit or larger integer */
-typedef int				INT;
-typedef unsigned int	UINT;
-
-/* These types must be 8-bit integer */
-typedef char			CHAR;
-typedef unsigned char	UCHAR;
-typedef unsigned char	BYTE;
-
-/* These types must be 16-bit integer */
-typedef short			SHORT;
-typedef unsigned short	USHORT;
-typedef unsigned short	WORD;
-typedef unsigned short	WCHAR;
-
-/* These types must be 32-bit integer */
-typedef long			LONG;
-typedef unsigned long	ULONG;
-typedef unsigned long	DWORD;
-
-#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/RTC.c b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/RTC.c
deleted file mode 100644
index a5a0f911d6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/RTC.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-#include "RTC.h"
-
-#if defined(DUMMY_RTC)
-
-/** Current dummy RTC time and date */
-static volatile TimeDate_t DummyRTC_Count;
-
-void RTC_Init(void)
-{
-	DummyRTC_Count.Hour   = 0;
-	DummyRTC_Count.Minute = 0;
-	DummyRTC_Count.Second = 0;
-	DummyRTC_Count.Day    = 1;
-	DummyRTC_Count.Month  = 1;
-	DummyRTC_Count.Year   = 00;
-}
-
-void RTC_Tick500ms(void)
-{
-	static bool HalfSecondElapsed = false;
-
-	HalfSecondElapsed = !HalfSecondElapsed;
-	if (HalfSecondElapsed == false)
-	  return;
-
-	if (++DummyRTC_Count.Second < 60)
-	  return;
-
-	DummyRTC_Count.Second = 0;
-
-	if (++DummyRTC_Count.Minute < 60)
-	  return;
-
-	DummyRTC_Count.Minute = 0;
-
-	if (++DummyRTC_Count.Hour < 24)
-	  return;
-
-	DummyRTC_Count.Hour = 0;
-
-	static const char MonthLength[12] = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-	uint8_t DaysInMonth = MonthLength[DummyRTC_Count.Month - 1];
-
-	/* Check if we need to account for a leap year */
-	if ((DummyRTC_Count.Month == 2) &&
-	    ((!(DummyRTC_Count.Year % 400)) || ((DummyRTC_Count.Year % 100) && !(DummyRTC_Count.Year % 4))))
-	{
-		DaysInMonth++;
-	}
-
-	if (++DummyRTC_Count.Day <= DaysInMonth)
-	  return;
-
-	DummyRTC_Count.Day = 1;
-
-	if (++DummyRTC_Count.Month <= 12)
-	  return;
-
-	DummyRTC_Count.Month = 1;
-	DummyRTC_Count.Year++;
-}
-
-bool RTC_SetTimeDate(const TimeDate_t* NewTimeDate)
-{
-	GlobalInterruptDisable();
-	DummyRTC_Count = *NewTimeDate;
-	GlobalInterruptEnable();
-
-	return true;
-}
-
-bool RTC_GetTimeDate(TimeDate_t* const TimeDate)
-{
-	GlobalInterruptDisable();
-	*TimeDate = DummyRTC_Count;
-	GlobalInterruptEnable();
-
-	return true;
-}
-
-#else
-
-void RTC_Init(void)
-{
-	/* Unused for a real external DS1307 RTC device */
-}
-
-void RTC_Tick500ms(void)
-{
-	/* Unused for a real external DS1307 RTC device */
-}
-
-bool RTC_SetTimeDate(const TimeDate_t* NewTimeDate)
-{
-	DS1307_DateTimeRegs_t NewRegValues;
-	const uint8_t         WriteAddress = 0;
-
-	// Convert new time data to the DS1307's time register layout
-	NewRegValues.Byte1.Fields.TenSec    = (NewTimeDate->Second / 10);
-	NewRegValues.Byte1.Fields.Sec       = (NewTimeDate->Second % 10);
-	NewRegValues.Byte1.Fields.CH        = false;
-	NewRegValues.Byte2.Fields.TenMin    = (NewTimeDate->Minute / 10);
-	NewRegValues.Byte2.Fields.Min       = (NewTimeDate->Minute % 10);
-	NewRegValues.Byte3.Fields.TenHour   = (NewTimeDate->Hour / 10);
-	NewRegValues.Byte3.Fields.Hour      = (NewTimeDate->Hour % 10);
-	NewRegValues.Byte3.Fields.TwelveHourMode = false;
-
-	// Convert new date data to the DS1307's date register layout
-	NewRegValues.Byte4.Fields.DayOfWeek = 0;
-	NewRegValues.Byte5.Fields.TenDay    = (NewTimeDate->Day / 10);
-	NewRegValues.Byte5.Fields.Day       = (NewTimeDate->Day % 10);
-	NewRegValues.Byte6.Fields.TenMonth  = (NewTimeDate->Month / 10);
-	NewRegValues.Byte6.Fields.Month     = (NewTimeDate->Month % 10);
-	NewRegValues.Byte7.Fields.TenYear   = (NewTimeDate->Year / 10);
-	NewRegValues.Byte7.Fields.Year      = (NewTimeDate->Year % 10);
-
-	// Write the new Time and Date into the DS1307
-	if (TWI_WritePacket(DS1307_ADDRESS, 10, &WriteAddress, sizeof(WriteAddress),
-	                   (uint8_t*)&NewRegValues, sizeof(DS1307_DateTimeRegs_t)) != TWI_ERROR_NoError)
-	{
-		return false;
-	}
-
-	return true;
-}
-
-bool RTC_GetTimeDate(TimeDate_t* const TimeDate)
-{
-	DS1307_DateTimeRegs_t CurrentRegValues;
-	const uint8_t         ReadAddress = 0;
-
-	// Read in the stored Time and Date from the DS1307
-	if (TWI_ReadPacket(DS1307_ADDRESS, 10, &ReadAddress, sizeof(ReadAddress),
-	                   (uint8_t*)&CurrentRegValues, sizeof(DS1307_DateTimeRegs_t)) != TWI_ERROR_NoError)
-	{
-		return false;
-	}
-
-	// Convert stored time value into decimal
-	TimeDate->Second  = (CurrentRegValues.Byte1.Fields.TenSec  * 10) + CurrentRegValues.Byte1.Fields.Sec;
-	TimeDate->Minute  = (CurrentRegValues.Byte2.Fields.TenMin  * 10) + CurrentRegValues.Byte2.Fields.Min;
-	TimeDate->Hour    = (CurrentRegValues.Byte3.Fields.TenHour * 10) + CurrentRegValues.Byte3.Fields.Hour;
-
-	// Convert stored date value into decimal
-	TimeDate->Day    = (CurrentRegValues.Byte5.Fields.TenDay   * 10) + CurrentRegValues.Byte5.Fields.Day;
-	TimeDate->Month  = (CurrentRegValues.Byte6.Fields.TenMonth * 10) + CurrentRegValues.Byte6.Fields.Month;
-	TimeDate->Year   = (CurrentRegValues.Byte7.Fields.TenYear  * 10) + CurrentRegValues.Byte7.Fields.Year;
-
-	return true;
-}
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/RTC.h b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/RTC.h
deleted file mode 100644
index ae4fbfe16f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/RTC.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-#ifndef _RTC_H_
-#define _RTC_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-
-		#include <LUFA/Drivers/Peripheral/TWI.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Type Defines: */
-		typedef struct
-		{
-			uint8_t Hour;
-			uint8_t Minute;
-			uint8_t Second;
-			uint8_t Day;
-			uint8_t Month;
-			uint8_t Year;
-		} TimeDate_t;
-
-		typedef struct
-		{
-			union
-			{
-				struct
-				{
-					unsigned Sec            : 4;
-					unsigned TenSec         : 3;
-					unsigned CH             : 1;
-				} Fields;
-
-				uint8_t IntVal;
-			} Byte1;
-
-			union
-			{
-				struct
-				{
-					unsigned Min            : 4;
-					unsigned TenMin         : 3;
-					unsigned Reserved       : 1;
-				} Fields;
-
-				uint8_t IntVal;
-			} Byte2;
-
-			union
-			{
-				struct
-				{
-					unsigned Hour            : 4;
-					unsigned TenHour         : 2;
-					unsigned TwelveHourMode  : 1;
-					unsigned Reserved        : 1;
-				} Fields;
-
-				uint8_t IntVal;
-			} Byte3;
-
-			union
-			{
-				struct
-				{
-					unsigned DayOfWeek       : 3;
-					unsigned Reserved        : 5;
-				} Fields;
-
-				uint8_t IntVal;
-			} Byte4;
-
-			union
-			{
-				struct
-				{
-					unsigned Day             : 4;
-					unsigned TenDay          : 2;
-					unsigned Reserved        : 2;
-				} Fields;
-
-				uint8_t IntVal;
-			} Byte5;
-
-			union
-			{
-				struct
-				{
-					unsigned Month           : 4;
-					unsigned TenMonth        : 1;
-					unsigned Reserved        : 3;
-				} Fields;
-
-				uint8_t IntVal;
-			} Byte6;
-
-			union
-			{
-				struct
-				{
-					unsigned Year            : 4;
-					unsigned TenYear         : 4;
-				} Fields;
-
-				uint8_t IntVal;
-			} Byte7;
-		} DS1307_DateTimeRegs_t;
-
-	/* Macros: */
-		/** TWI address of the DS1307 device on the bus. */
-		#define DS1307_ADDRESS       0xD0
-
-	/* Function Prototypes: */
-		void RTC_Init(void);
-		void RTC_Tick500ms(void);
-		bool RTC_SetTimeDate(const TimeDate_t* NewTimeDate);
-		bool RTC_GetTimeDate(TimeDate_t* const TimeDate);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/SCSI.c b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/SCSI.c
deleted file mode 100644
index 315f2e3a3d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/SCSI.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  SCSI command processing routines, for SCSI commands issued by the host. Mass Storage
- *  devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information,
- *  which wrap around standard SCSI device commands for controlling the actual storage medium.
- */
-
-#define  INCLUDE_FROM_SCSI_C
-#include "SCSI.h"
-
-/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
- *  features and capabilities.
- */
-static const SCSI_Inquiry_Response_t InquiryData =
-	{
-		.DeviceType          = DEVICE_TYPE_BLOCK,
-		.PeripheralQualifier = 0,
-
-		.Removable           = true,
-
-		.Version             = 0,
-
-		.ResponseDataFormat  = 2,
-		.NormACA             = false,
-		.TrmTsk              = false,
-		.AERC                = false,
-
-		.AdditionalLength    = 0x1F,
-
-		.SoftReset           = false,
-		.CmdQue              = false,
-		.Linked              = false,
-		.Sync                = false,
-		.WideBus16Bit        = false,
-		.WideBus32Bit        = false,
-		.RelAddr             = false,
-
-		.VendorID            = "LUFA",
-		.ProductID           = "Dataflash Disk",
-		.RevisionID          = {'0','.','0','0'},
-	};
-
-/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE
- *  command is issued. This gives information on exactly why the last command failed to complete.
- */
-static SCSI_Request_Sense_Response_t SenseData =
-	{
-		.ResponseCode        = 0x70,
-		.AdditionalLength    = 0x0A,
-	};
-
-
-/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches
- *  to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns
- *  a command failure due to a ILLEGAL REQUEST.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise
- */
-bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	bool CommandSuccess = false;
-
-	/* Run the appropriate SCSI command hander function based on the passed command */
-	switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0])
-	{
-		case SCSI_CMD_INQUIRY:
-			CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_REQUEST_SENSE:
-			CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_READ_CAPACITY_10:
-			CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_SEND_DIAGNOSTIC:
-			CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_WRITE_10:
-			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE);
-			break;
-		case SCSI_CMD_READ_10:
-			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ);
-			break;
-		case SCSI_CMD_MODE_SENSE_6:
-			CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_START_STOP_UNIT:
-		case SCSI_CMD_TEST_UNIT_READY:
-		case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-		case SCSI_CMD_VERIFY_10:
-			/* These commands should just succeed, no handling required */
-			CommandSuccess = true;
-			MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
-			break;
-		default:
-			/* Update the SENSE key to reflect the invalid command */
-			SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		                   SCSI_ASENSE_INVALID_COMMAND,
-		                   SCSI_ASENSEQ_NO_QUALIFIER);
-			break;
-	}
-
-	/* Check if command was successfully processed */
-	if (CommandSuccess)
-	{
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD,
-		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return true;
-	}
-
-	return false;
-}
-
-/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features
- *  and capabilities to the host.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint16_t AllocationLength  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]);
-	uint16_t BytesTransferred  = MIN(AllocationLength, sizeof(InquiryData));
-
-	/* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */
-	if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||
-	     MSInterfaceInfo->State.CommandBlock.SCSICommandData[2])
-	{
-		/* Optional but unsupported bits set - update the SENSE key and fail the request */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL);
-
-	/* Pad out remaining bytes with 0x00 */
-	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
-
-	/* Finalize the stream transfer to send the last packet */
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command,
- *  including the error code and additional error information so that the host can determine why a command failed to complete.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint8_t  AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];
-	uint8_t  BytesTransferred = MIN(AllocationLength, sizeof(SenseData));
-
-	Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL);
-	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity
- *  on the selected Logical Unit (drive), as a number of OS-sized blocks.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint32_t LastBlockAddressInLUN = (VIRTUAL_MEMORY_BLOCKS - 1);
-	uint32_t MediaBlockSize        = VIRTUAL_MEMORY_BLOCK_SIZE;
-
-	Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL);
-	Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL);
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the
- *  board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is
- *  supported.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	/* Check to see if the SELF TEST bit is not set */
-	if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2)))
-	{
-		/* Only self-test supported - update SENSE key and fail the command */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Check to see if all attached Dataflash ICs are functional */
-	if (!(DataflashManager_CheckDataflashOperation()))
-	{
-		/* Update SENSE key with a hardware error condition and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR,
-		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address
- *  and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual
- *  reading and writing of the data.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *  \param[in] IsDataRead  Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                      const bool IsDataRead)
-{
-	uint32_t BlockAddress;
-	uint16_t TotalBlocks;
-
-	/* Check if the disk is write protected or not */
-	if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY)
-	{
-		/* Block address is invalid, update SENSE key and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT,
-		               SCSI_ASENSE_WRITE_PROTECTED,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
-	BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);
-
-	/* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */
-	TotalBlocks  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]);
-
-	/* Check if the block address is outside the maximum allowable value for the LUN */
-	if (BlockAddress >= VIRTUAL_MEMORY_BLOCKS)
-	{
-		/* Block address is invalid, update SENSE key and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
-	if (IsDataRead == DATA_READ)
-	  DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
-	else
-	  DataflashManager_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
-
-	/* Update the bytes transferred counter and succeed the command */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);
-
-	return true;
-}
-
-/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about
- *  the SCSI device, as well as the device's Write Protect status.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	/* Send an empty header response with the Write Protect flag status */
-	Endpoint_Write_8(0x00);
-	Endpoint_Write_8(0x00);
-	Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00);
-	Endpoint_Write_8(0x00);
-	Endpoint_ClearIN();
-
-	/* Update the bytes transferred counter and succeed the command */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4;
-
-	return true;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/SCSI.h b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/SCSI.h
deleted file mode 100644
index ec9c3e2a4f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/Lib/SCSI.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for SCSI.c.
- */
-
-#ifndef _SCSI_H_
-#define _SCSI_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "../TempDataLogger.h"
-		#include "../Descriptors.h"
-		#include "DataflashManager.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
-		 *  is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
-		 *  the last command failure) in a quick and easy manner.
-		 *
-		 *  \param[in] Key    New SCSI sense key to set the sense code to
-		 *  \param[in] Acode  New SCSI additional sense key to set the additional sense code to
-		 *  \param[in] Aqual  New SCSI additional sense key qualifier to set the additional sense qualifier code to
-		 */
-		#define SCSI_SET_SENSE(Key, Acode, Aqual)  do { SenseData.SenseKey                 = (Key);   \
-		                                                SenseData.AdditionalSenseCode      = (Acode); \
-		                                                SenseData.AdditionalSenseQualifier = (Aqual); } while (0)
-
-		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */
-		#define DATA_READ           true
-
-		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */
-		#define DATA_WRITE          false
-
-		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */
-		#define DEVICE_TYPE_BLOCK   0x00
-
-		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */
-		#define DEVICE_TYPE_CDROM   0x05
-
-	/* Function Prototypes: */
-		bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-
-		#if defined(INCLUDE_FROM_SCSI_C)
-			static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-			                                      const bool IsDataRead);
-			static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempDataLogger.c b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempDataLogger.c
deleted file mode 100644
index 44904fbe1e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempDataLogger.c
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the TemperatureDataLogger project. This file contains the main tasks of
- *  the project and is responsible for the initial application hardware configuration.
- */
-
-#include "TempDataLogger.h"
-
-/** LUFA Mass Storage Class driver interface configuration and state information. This structure is
- *  passed to all Mass Storage Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_MS_Device_t Disk_MS_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber           = INTERFACE_ID_MassStorage,
-				.DataINEndpoint            =
-					{
-						.Address           = MASS_STORAGE_IN_EPADDR,
-						.Size              = MASS_STORAGE_IO_EPSIZE,
-						.Banks             = 1,
-					},
-				.DataOUTEndpoint           =
-					{
-						.Address           = MASS_STORAGE_OUT_EPADDR,
-						.Size              = MASS_STORAGE_IO_EPSIZE,
-						.Banks             = 1,
-					},
-				.TotalLUNs                 = 1,
-			},
-	};
-
-/** Buffer to hold the previously generated HID report, for comparison purposes inside the HID class driver. */
-static uint8_t PrevHIDReportBuffer[GENERIC_REPORT_SIZE];
-
-/** LUFA HID Class driver interface configuration and state information. This structure is
- *  passed to all HID Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_HID_Device_t Generic_HID_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber              = INTERFACE_ID_HID,
-				.ReportINEndpoint             =
-					{
-						.Address              = GENERIC_IN_EPADDR,
-						.Size                 = GENERIC_EPSIZE,
-						.Banks                = 1,
-					},
-				.PrevReportINBuffer           = PrevHIDReportBuffer,
-				.PrevReportINBufferSize       = sizeof(PrevHIDReportBuffer),
-			},
-	};
-
-/** Non-volatile Logging Interval value in EEPROM, stored as a number of 500ms ticks */
-static uint8_t EEMEM LoggingInterval500MS_EEPROM = DEFAULT_LOG_INTERVAL;
-
-/** SRAM Logging Interval value fetched from EEPROM, stored as a number of 500ms ticks */
-static uint8_t LoggingInterval500MS_SRAM;
-
-/** Total number of 500ms logging ticks elapsed since the last log value was recorded */
-static uint16_t CurrentLoggingTicks;
-
-/** FAT Fs structure to hold the internal state of the FAT driver for the Dataflash contents. */
-static FATFS DiskFATState;
-
-/** FAT Fs structure to hold a FAT file handle for the log data write destination. */
-static FIL TempLogFile;
-
-
-/** ISR to handle the 500ms ticks for sampling and data logging */
-ISR(TIMER1_COMPA_vect, ISR_BLOCK)
-{
-	/* Signal a 500ms tick has elapsed to the RTC */
-	RTC_Tick500ms();
-
-	/* Check to see if the logging interval has expired */
-	if (++CurrentLoggingTicks < LoggingInterval500MS_SRAM)
-	  return;
-
-	/* Reset log tick counter to prepare for next logging interval */
-	CurrentLoggingTicks = 0;
-
-	uint8_t LEDMask = LEDs_GetLEDs();
-	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-	/* Only log when not connected to a USB host */
-	if (USB_DeviceState == DEVICE_STATE_Unattached)
-	{
-		TimeDate_t CurrentTimeDate;
-		RTC_GetTimeDate(&CurrentTimeDate);
-
-		char     LineBuffer[100];
-		uint16_t BytesWritten;
-
-		BytesWritten = sprintf(LineBuffer, "%02d/%02d/20%02d, %02d:%02d:%02d, %d Degrees\r\n",
-		                       CurrentTimeDate.Day, CurrentTimeDate.Month, CurrentTimeDate.Year,
-		                       CurrentTimeDate.Hour, CurrentTimeDate.Minute, CurrentTimeDate.Second,
-		                       Temperature_GetTemperature());
-
-		f_write(&TempLogFile, LineBuffer, BytesWritten, &BytesWritten);
-		f_sync(&TempLogFile);
-	}
-
-	LEDs_SetAllLEDs(LEDMask);
-}
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	/* Fetch logging interval from EEPROM */
-	LoggingInterval500MS_SRAM = eeprom_read_byte(&LoggingInterval500MS_EEPROM);
-
-	/* Check if the logging interval is invalid (0xFF) indicating that the EEPROM is blank */
-	if (LoggingInterval500MS_SRAM == 0xFF)
-	  LoggingInterval500MS_SRAM = DEFAULT_LOG_INTERVAL;
-
-	/* Mount and open the log file on the Dataflash FAT partition */
-	OpenLogFile();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		MS_Device_USBTask(&Disk_MS_Interface);
-		HID_Device_USBTask(&Generic_HID_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Opens the log file on the Dataflash's FAT formatted partition according to the current date */
-void OpenLogFile(void)
-{
-	char LogFileName[12];
-
-	/* Get the current date for the filename as "DDMMYY.csv" */
-	TimeDate_t CurrentTimeDate;
-	RTC_GetTimeDate(&CurrentTimeDate);
-	sprintf(LogFileName, "%02d%02d%02d.csv", CurrentTimeDate.Day, CurrentTimeDate.Month, CurrentTimeDate.Year);
-
-	/* Mount the storage device, open the file */
-	f_mount(0, &DiskFATState);
-	f_open(&TempLogFile, LogFileName, FA_OPEN_ALWAYS | FA_WRITE);
-	f_lseek(&TempLogFile, TempLogFile.fsize);
-}
-
-/** Closes the open data log file on the Dataflash's FAT formatted partition */
-void CloseLogFile(void)
-{
-	/* Sync any data waiting to be written, unmount the storage device */
-	f_sync(&TempLogFile);
-	f_close(&TempLogFile);
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128);
-	Temperature_Init();
-	Dataflash_Init();
-	USB_Init();
-	TWI_Init(TWI_BIT_PRESCALE_4, TWI_BITLENGTH_FROM_FREQ(4, 50000));
-	RTC_Init();
-
-	/* 500ms logging interval timer configuration */
-	OCR1A   = (((F_CPU / 256) / 2) - 1);
-	TCCR1B  = (1 << WGM12) | (1 << CS12);
-	TIMSK1  = (1 << OCIE1A);
-
-	/* Check if the Dataflash is working, abort if not */
-	if (!(DataflashManager_CheckDataflashOperation()))
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		for(;;);
-	}
-
-	/* Clear Dataflash sector protections, if enabled */
-	DataflashManager_ResetDataflashProtections();
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	/* Close the log file so that the host has exclusive file system access */
-	CloseLogFile();
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-
-	/* Mount and open the log file on the Dataflash FAT partition */
-	OpenLogFile();
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= HID_Device_ConfigureEndpoints(&Generic_HID_Interface);
-	ConfigSuccess &= MS_Device_ConfigureEndpoints(&Disk_MS_Interface);
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	MS_Device_ProcessControlRequest(&Disk_MS_Interface);
-	HID_Device_ProcessControlRequest(&Generic_HID_Interface);
-}
-
-/** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface configuration structure being referenced
- */
-bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	bool CommandSuccess;
-
-	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-	CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo);
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-
-	return CommandSuccess;
-}
-
-/** HID class driver callback function for the creation of HID reports to the host.
- *
- *  \param[in]     HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in,out] ReportID    Report ID requested by the host if non-zero, otherwise callback should set to the generated report ID
- *  \param[in]     ReportType  Type of the report to create, either HID_REPORT_ITEM_In or HID_REPORT_ITEM_Feature
- *  \param[out]    ReportData  Pointer to a buffer where the created report should be stored
- *  \param[out]    ReportSize  Number of bytes written in the report (or zero if no report is to be sent)
- *
- *  \return Boolean \c true to force the sending of the report, \c false to let the library determine if it needs to be sent
- */
-bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                         uint8_t* const ReportID,
-                                         const uint8_t ReportType,
-                                         void* ReportData,
-                                         uint16_t* const ReportSize)
-{
-	Device_Report_t* ReportParams = (Device_Report_t*)ReportData;
-
-	RTC_GetTimeDate(&ReportParams->TimeDate);
-
-	ReportParams->LogInterval500MS = LoggingInterval500MS_SRAM;
-
-	*ReportSize = sizeof(Device_Report_t);
-	return true;
-}
-
-/** HID class driver callback function for the processing of HID reports from the host.
- *
- *  \param[in] HIDInterfaceInfo  Pointer to the HID class interface configuration structure being referenced
- *  \param[in] ReportID    Report ID of the received report from the host
- *  \param[in] ReportType  The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature
- *  \param[in] ReportData  Pointer to a buffer where the received report has been stored
- *  \param[in] ReportSize  Size in bytes of the received HID report
- */
-void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-                                          const uint8_t ReportID,
-                                          const uint8_t ReportType,
-                                          const void* ReportData,
-                                          const uint16_t ReportSize)
-{
-	Device_Report_t* ReportParams = (Device_Report_t*)ReportData;
-
-	RTC_SetTimeDate(&ReportParams->TimeDate);
-
-	/* If the logging interval has changed from its current value, write it to EEPROM */
-	if (LoggingInterval500MS_SRAM != ReportParams->LogInterval500MS)
-	{
-		LoggingInterval500MS_SRAM = ReportParams->LogInterval500MS;
-		eeprom_update_byte(&LoggingInterval500MS_EEPROM, LoggingInterval500MS_SRAM);
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempDataLogger.h b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempDataLogger.h
deleted file mode 100644
index 70d17f4daf..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempDataLogger.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for TempDataLogger.c.
- */
-
-#ifndef _TEMP_DATALOGGER_H_
-#define _TEMP_DATALOGGER_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <stdio.h>
-
-		#include "Descriptors.h"
-
-		#include "Lib/SCSI.h"
-		#include "Lib/DataflashManager.h"
-		#include "Lib/FATFs/ff.h"
-		#include "Lib/RTC.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Temperature.h>
-		#include <LUFA/Drivers/Peripheral/ADC.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY          LEDS_LED2
-
-		/** Default log interval when the EEPROM is blank, in 500ms ticks. */
-		#define DEFAULT_LOG_INTERVAL     10
-
-		/** Indicates if the disk is write protected or not. */
-		#define DISK_READ_ONLY           false
-
-	/* Type Defines: */
-		typedef struct
-		{
-			TimeDate_t TimeDate;
-			uint8_t    LogInterval500MS;
-		} Device_Report_t;
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void OpenLogFile(void);
-		void CloseLogFile(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-		bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-		bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                         uint8_t* const ReportID,
-		                                         const uint8_t ReportType,
-		                                         void* ReportData,
-		                                         uint16_t* const ReportSize);
-		void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
-		                                          const uint8_t ReportID,
-		                                          const uint8_t ReportType,
-		                                          const void* ReportData,
-		                                          const uint16_t ReportSize);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/COPYING.LESSER.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/COPYING.LESSER.txt
deleted file mode 100644
index bdf8db0eed..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/COPYING.LESSER.txt
+++ /dev/null
@@ -1,166 +0,0 @@
-		   GNU LESSER GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-
-  This version of the GNU Lesser General Public License incorporates
-the terms and conditions of version 3 of the GNU General Public
-License, supplemented by the additional permissions listed below.
-
-  0. Additional Definitions.
-
-  As used herein, "this License" refers to version 3 of the GNU Lesser
-General Public License, and the "GNU GPL" refers to version 3 of the GNU
-General Public License.
-
-  "The Library" refers to a covered work governed by this License,
-other than an Application or a Combined Work as defined below.
-
-  An "Application" is any work that makes use of an interface provided
-by the Library, but which is not otherwise based on the Library.
-Defining a subclass of a class defined by the Library is deemed a mode
-of using an interface provided by the Library.
-
-  A "Combined Work" is a work produced by combining or linking an
-Application with the Library.  The particular version of the Library
-with which the Combined Work was made is also called the "Linked
-Version".
-
-  The "Minimal Corresponding Source" for a Combined Work means the
-Corresponding Source for the Combined Work, excluding any source code
-for portions of the Combined Work that, considered in isolation, are
-based on the Application, and not on the Linked Version.
-
-  The "Corresponding Application Code" for a Combined Work means the
-object code and/or source code for the Application, including any data
-and utility programs needed for reproducing the Combined Work from the
-Application, but excluding the System Libraries of the Combined Work.
-
-  1. Exception to Section 3 of the GNU GPL.
-
-  You may convey a covered work under sections 3 and 4 of this License
-without being bound by section 3 of the GNU GPL.
-
-  2. Conveying Modified Versions.
-
-  If you modify a copy of the Library, and, in your modifications, a
-facility refers to a function or data to be supplied by an Application
-that uses the facility (other than as an argument passed when the
-facility is invoked), then you may convey a copy of the modified
-version:
-
-   a) under this License, provided that you make a good faith effort to
-   ensure that, in the event an Application does not supply the
-   function or data, the facility still operates, and performs
-   whatever part of its purpose remains meaningful, or
-
-   b) under the GNU GPL, with none of the additional permissions of
-   this License applicable to that copy.
-
-  3. Object Code Incorporating Material from Library Header Files.
-
-  The object code form of an Application may incorporate material from
-a header file that is part of the Library.  You may convey such object
-code under terms of your choice, provided that, if the incorporated
-material is not limited to numerical parameters, data structure
-layouts and accessors, or small macros, inline functions and templates
-(ten or fewer lines in length), you do both of the following:
-
-   a) Give prominent notice with each copy of the object code that the
-   Library is used in it and that the Library and its use are
-   covered by this License.
-
-   b) Accompany the object code with a copy of the GNU GPL and this license
-   document.
-
-  4. Combined Works.
-
-  You may convey a Combined Work under terms of your choice that,
-taken together, effectively do not restrict modification of the
-portions of the Library contained in the Combined Work and reverse
-engineering for debugging such modifications, if you also do each of
-the following:
-
-   a) Give prominent notice with each copy of the Combined Work that
-   the Library is used in it and that the Library and its use are
-   covered by this License.
-
-   b) Accompany the Combined Work with a copy of the GNU GPL and this license
-   document.
-
-   c) For a Combined Work that displays copyright notices during
-   execution, include the copyright notice for the Library among
-   these notices, as well as a reference directing the user to the
-   copies of the GNU GPL and this license document.
-
-   d) Do one of the following:
-
-       0) Convey the Minimal Corresponding Source under the terms of this
-       License, and the Corresponding Application Code in a form
-       suitable for, and under terms that permit, the user to
-       recombine or relink the Application with a modified version of
-       the Linked Version to produce a modified Combined Work, in the
-       manner specified by section 6 of the GNU GPL for conveying
-       Corresponding Source.
-
-       1) Use a suitable shared library mechanism for linking with the
-       Library.  A suitable mechanism is one that (a) uses at run time
-       a copy of the Library already present on the user's computer
-       system, and (b) will operate properly with a modified version
-       of the Library that is interface-compatible with the Linked
-       Version.
-
-   e) Provide Installation Information, but only if you would otherwise
-   be required to provide such information under section 6 of the
-   GNU GPL, and only to the extent that such information is
-   necessary to install and execute a modified version of the
-   Combined Work produced by recombining or relinking the
-   Application with a modified version of the Linked Version. (If
-   you use option 4d0, the Installation Information must accompany
-   the Minimal Corresponding Source and Corresponding Application
-   Code. If you use option 4d1, you must provide the Installation
-   Information in the manner specified by section 6 of the GNU GPL
-   for conveying Corresponding Source.)
-
-  5. Combined Libraries.
-
-  You may place library facilities that are a work based on the
-Library side by side in a single library together with other library
-facilities that are not Applications and are not covered by this
-License, and convey such a combined library under terms of your
-choice, if you do both of the following:
-
-   a) Accompany the combined library with a copy of the same work based
-   on the Library, uncombined with any other library facilities,
-   conveyed under the terms of this License.
-
-   b) Give prominent notice with the combined library that part of it
-   is a work based on the Library, and explaining where to find the
-   accompanying uncombined form of the same work.
-
-  6. Revised Versions of the GNU Lesser General Public License.
-
-  The Free Software Foundation may publish revised and/or new versions
-of the GNU Lesser General Public License from time to time. Such new
-versions will be similar in spirit to the present version, but may
-differ in detail to address new problems or concerns.
-
-  Each version is given a distinguishing version number. If the
-Library as you received it specifies that a certain numbered version
-of the GNU Lesser General Public License "or any later version"
-applies to it, you have the option of following the terms and
-conditions either of that published version or of any later version
-published by the Free Software Foundation. If the Library as you
-received it does not specify a version number of the GNU Lesser
-General Public License, you may choose any version of the GNU Lesser
-General Public License ever published by the Free Software Foundation.
-
-  If the Library as you received it specifies that a proxy can decide
-whether future versions of the GNU Lesser General Public License shall
-apply, that proxy's public statement of acceptance of any version is
-permanent authorization for you to choose that version for the
-Library.
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/COPYING.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/COPYING.txt
deleted file mode 100644
index 10926e87f1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/COPYING.txt
+++ /dev/null
@@ -1,675 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
-
-  The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works.  By contrast,
-the GNU General Public License is intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users.  We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors.  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
-  To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights.  Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received.  You must make sure that they, too, receive
-or can get the source code.  And you must show them these terms so they
-know their rights.
-
-  Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
-
-  For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software.  For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
-
-  Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so.  This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software.  The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable.  Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products.  If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
-  Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary.  To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                       TERMS AND CONDITIONS
-
-  0. Definitions.
-
-  "This License" refers to version 3 of the GNU General Public License.
-
-  "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
-  "The Program" refers to any copyrightable work licensed under this
-License.  Each licensee is addressed as "you".  "Licensees" and
-"recipients" may be individuals or organizations.
-
-  To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy.  The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
-  A "covered work" means either the unmodified Program or a work based
-on the Program.
-
-  To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy.  Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
-  To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies.  Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
-  An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License.  If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
-  1. Source Code.
-
-  The "source code" for a work means the preferred form of the work
-for making modifications to it.  "Object code" means any non-source
-form of a work.
-
-  A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
-  The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form.  A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
-  The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities.  However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work.  For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
-  The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
-  The Corresponding Source for a work in source code form is that
-same work.
-
-  2. Basic Permissions.
-
-  All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met.  This License explicitly affirms your unlimited
-permission to run the unmodified Program.  The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work.  This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
-  You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force.  You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright.  Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
-  Conveying under any other circumstances is permitted solely under
-the conditions stated below.  Sublicensing is not allowed; section 10
-makes it unnecessary.
-
-  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
-  No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
-  When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
-  4. Conveying Verbatim Copies.
-
-  You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
-  You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
-  5. Conveying Modified Source Versions.
-
-  You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
-    a) The work must carry prominent notices stating that you modified
-    it, and giving a relevant date.
-
-    b) The work must carry prominent notices stating that it is
-    released under this License and any conditions added under section
-    7.  This requirement modifies the requirement in section 4 to
-    "keep intact all notices".
-
-    c) You must license the entire work, as a whole, under this
-    License to anyone who comes into possession of a copy.  This
-    License will therefore apply, along with any applicable section 7
-    additional terms, to the whole of the work, and all its parts,
-    regardless of how they are packaged.  This License gives no
-    permission to license the work in any other way, but it does not
-    invalidate such permission if you have separately received it.
-
-    d) If the work has interactive user interfaces, each must display
-    Appropriate Legal Notices; however, if the Program has interactive
-    interfaces that do not display Appropriate Legal Notices, your
-    work need not make them do so.
-
-  A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit.  Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
-  6. Conveying Non-Source Forms.
-
-  You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
-    a) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by the
-    Corresponding Source fixed on a durable physical medium
-    customarily used for software interchange.
-
-    b) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by a
-    written offer, valid for at least three years and valid for as
-    long as you offer spare parts or customer support for that product
-    model, to give anyone who possesses the object code either (1) a
-    copy of the Corresponding Source for all the software in the
-    product that is covered by this License, on a durable physical
-    medium customarily used for software interchange, for a price no
-    more than your reasonable cost of physically performing this
-    conveying of source, or (2) access to copy the
-    Corresponding Source from a network server at no charge.
-
-    c) Convey individual copies of the object code with a copy of the
-    written offer to provide the Corresponding Source.  This
-    alternative is allowed only occasionally and noncommercially, and
-    only if you received the object code with such an offer, in accord
-    with subsection 6b.
-
-    d) Convey the object code by offering access from a designated
-    place (gratis or for a charge), and offer equivalent access to the
-    Corresponding Source in the same way through the same place at no
-    further charge.  You need not require recipients to copy the
-    Corresponding Source along with the object code.  If the place to
-    copy the object code is a network server, the Corresponding Source
-    may be on a different server (operated by you or a third party)
-    that supports equivalent copying facilities, provided you maintain
-    clear directions next to the object code saying where to find the
-    Corresponding Source.  Regardless of what server hosts the
-    Corresponding Source, you remain obligated to ensure that it is
-    available for as long as needed to satisfy these requirements.
-
-    e) Convey the object code using peer-to-peer transmission, provided
-    you inform other peers where the object code and Corresponding
-    Source of the work are being offered to the general public at no
-    charge under subsection 6d.
-
-  A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
-  A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling.  In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage.  For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product.  A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
-  "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source.  The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
-  If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information.  But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
-  The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed.  Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
-  Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
-  7. Additional Terms.
-
-  "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law.  If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
-  When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it.  (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.)  You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
-  Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
-    a) Disclaiming warranty or limiting liability differently from the
-    terms of sections 15 and 16 of this License; or
-
-    b) Requiring preservation of specified reasonable legal notices or
-    author attributions in that material or in the Appropriate Legal
-    Notices displayed by works containing it; or
-
-    c) Prohibiting misrepresentation of the origin of that material, or
-    requiring that modified versions of such material be marked in
-    reasonable ways as different from the original version; or
-
-    d) Limiting the use for publicity purposes of names of licensors or
-    authors of the material; or
-
-    e) Declining to grant rights under trademark law for use of some
-    trade names, trademarks, or service marks; or
-
-    f) Requiring indemnification of licensors and authors of that
-    material by anyone who conveys the material (or modified versions of
-    it) with contractual assumptions of liability to the recipient, for
-    any liability that these contractual assumptions directly impose on
-    those licensors and authors.
-
-  All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10.  If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term.  If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
-  If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
-  Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
-  8. Termination.
-
-  You may not propagate or modify a covered work except as expressly
-provided under this License.  Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
-  However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
-  Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
-  Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License.  If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
-  9. Acceptance Not Required for Having Copies.
-
-  You are not required to accept this License in order to receive or
-run a copy of the Program.  Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance.  However,
-nothing other than this License grants you permission to propagate or
-modify any covered work.  These actions infringe copyright if you do
-not accept this License.  Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
-  10. Automatic Licensing of Downstream Recipients.
-
-  Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License.  You are not responsible
-for enforcing compliance by third parties with this License.
-
-  An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations.  If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
-  You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License.  For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
-  11. Patents.
-
-  A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based.  The
-work thus licensed is called the contributor's "contributor version".
-
-  A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version.  For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
-  Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
-  In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement).  To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
-  If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients.  "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
-  If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
-  A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License.  You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
-  Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
-  12. No Surrender of Others' Freedom.
-
-  If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all.  For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
-  13. Use with the GNU Affero General Public License.
-
-  Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
-combined work, and to convey the resulting work.  The terms of this
-License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
-
-  14. Revised Versions of this License.
-
-  The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-  Each version is given a distinguishing version number.  If the
-Program specifies that a certain numbered version of the GNU General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation.  If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
-  If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
-  Later license versions may give you additional or different
-permissions.  However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
-  15. Disclaimer of Warranty.
-
-  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. Limitation of Liability.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
-  17. Interpretation of Sections 15 and 16.
-
-  If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
-  If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
-    <program>  Copyright (C) <year>  <name of author>
-    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
-
-  You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<http://www.gnu.org/licenses/>.
-
-  The GNU General Public License does not permit incorporating your program
-into proprietary programs.  If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.  But first, please read
-<http://www.gnu.org/philosophy/why-not-lgpl.html>.
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs
deleted file mode 100644
index 58fac51449..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs
+++ /dev/null
@@ -1,181 +0,0 @@
-namespace Project1HostApp
-{
-    partial class frmDataloggerSettings
-    {
-        /// <summary>
-        /// Required designer variable.
-        /// </summary>
-        private System.ComponentModel.IContainer components = null;
-
-        /// <summary>
-        /// Clean up any resources being used.
-        /// </summary>
-        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
-        protected override void Dispose(bool disposing)
-        {
-            if (disposing && (components != null))
-            {
-                components.Dispose();
-            }
-            base.Dispose(disposing);
-        }
-
-        #region Windows Form Designer generated code
-
-        /// <summary>
-        /// Required method for Designer support - do not modify
-        /// the contents of this method with the code editor.
-        /// </summary>
-        private void InitializeComponent()
-        {
-            this.btnSetValues = new System.Windows.Forms.Button();
-            this.dtpTime = new System.Windows.Forms.DateTimePicker();
-            this.lblTime = new System.Windows.Forms.Label();
-            this.lblLoggingInterval = new System.Windows.Forms.Label();
-            this.nudLogInterval = new System.Windows.Forms.NumericUpDown();
-            this.lblSeconds = new System.Windows.Forms.Label();
-            this.btnGetValues = new System.Windows.Forms.Button();
-            this.lblDate = new System.Windows.Forms.Label();
-            this.dtpDate = new System.Windows.Forms.DateTimePicker();
-            ((System.ComponentModel.ISupportInitialize)(this.nudLogInterval)).BeginInit();
-            this.SuspendLayout();
-            // 
-            // btnSetValues
-            // 
-            this.btnSetValues.Location = new System.Drawing.Point(168, 136);
-            this.btnSetValues.Name = "btnSetValues";
-            this.btnSetValues.Size = new System.Drawing.Size(90, 35);
-            this.btnSetValues.TabIndex = 0;
-            this.btnSetValues.Text = "Set Values";
-            this.btnSetValues.UseVisualStyleBackColor = true;
-            this.btnSetValues.Click += new System.EventHandler(this.btnSetValues_Click);
-            // 
-            // dtpTime
-            // 
-            this.dtpTime.CustomFormat = "";
-            this.dtpTime.Format = System.Windows.Forms.DateTimePickerFormat.Time;
-            this.dtpTime.Location = new System.Drawing.Point(148, 61);
-            this.dtpTime.Name = "dtpTime";
-            this.dtpTime.ShowUpDown = true;
-            this.dtpTime.Size = new System.Drawing.Size(110, 20);
-            this.dtpTime.TabIndex = 1;
-            // 
-            // lblTime
-            // 
-            this.lblTime.AutoSize = true;
-            this.lblTime.Font = new System.Drawing.Font("Microsoft Sans Serif", 8.25F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
-            this.lblTime.Location = new System.Drawing.Point(51, 67);
-            this.lblTime.Name = "lblTime";
-            this.lblTime.Size = new System.Drawing.Size(82, 13);
-            this.lblTime.TabIndex = 2;
-            this.lblTime.Text = "Device Time:";
-            // 
-            // lblLoggingInterval
-            // 
-            this.lblLoggingInterval.AutoSize = true;
-            this.lblLoggingInterval.Font = new System.Drawing.Font("Microsoft Sans Serif", 8.25F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
-            this.lblLoggingInterval.Location = new System.Drawing.Point(30, 101);
-            this.lblLoggingInterval.Name = "lblLoggingInterval";
-            this.lblLoggingInterval.Size = new System.Drawing.Size(103, 13);
-            this.lblLoggingInterval.TabIndex = 3;
-            this.lblLoggingInterval.Text = "Logging Interval:";
-            // 
-            // nudLogInterval
-            // 
-            this.nudLogInterval.Location = new System.Drawing.Point(148, 94);
-            this.nudLogInterval.Maximum = new decimal(new int[] {
-            60,
-            0,
-            0,
-            0});
-            this.nudLogInterval.Minimum = new decimal(new int[] {
-            1,
-            0,
-            0,
-            0});
-            this.nudLogInterval.Name = "nudLogInterval";
-            this.nudLogInterval.Size = new System.Drawing.Size(51, 20);
-            this.nudLogInterval.TabIndex = 5;
-            this.nudLogInterval.Value = new decimal(new int[] {
-            5,
-            0,
-            0,
-            0});
-            // 
-            // lblSeconds
-            // 
-            this.lblSeconds.AutoSize = true;
-            this.lblSeconds.Location = new System.Drawing.Point(209, 101);
-            this.lblSeconds.Name = "lblSeconds";
-            this.lblSeconds.Size = new System.Drawing.Size(49, 13);
-            this.lblSeconds.TabIndex = 6;
-            this.lblSeconds.Text = "Seconds";
-            // 
-            // btnGetValues
-            // 
-            this.btnGetValues.Location = new System.Drawing.Point(30, 136);
-            this.btnGetValues.Name = "btnGetValues";
-            this.btnGetValues.Size = new System.Drawing.Size(90, 35);
-            this.btnGetValues.TabIndex = 7;
-            this.btnGetValues.Text = "Get Values";
-            this.btnGetValues.UseVisualStyleBackColor = true;
-            this.btnGetValues.Click += new System.EventHandler(this.btnGetValues_Click);
-            // 
-            // lblDate
-            // 
-            this.lblDate.AutoSize = true;
-            this.lblDate.Font = new System.Drawing.Font("Microsoft Sans Serif", 8.25F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
-            this.lblDate.Location = new System.Drawing.Point(51, 33);
-            this.lblDate.Name = "lblDate";
-            this.lblDate.Size = new System.Drawing.Size(82, 13);
-            this.lblDate.TabIndex = 8;
-            this.lblDate.Text = "Device Date:";
-            // 
-            // dtpDate
-            // 
-            this.dtpDate.CustomFormat = "dd/MM/yyyy";
-            this.dtpDate.Format = System.Windows.Forms.DateTimePickerFormat.Custom;
-            this.dtpDate.Location = new System.Drawing.Point(148, 27);
-            this.dtpDate.Name = "dtpDate";
-            this.dtpDate.Size = new System.Drawing.Size(110, 20);
-            this.dtpDate.TabIndex = 9;
-            // 
-            // frmDataloggerSettings
-            // 
-            this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
-            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
-            this.ClientSize = new System.Drawing.Size(300, 197);
-            this.Controls.Add(this.dtpDate);
-            this.Controls.Add(this.lblDate);
-            this.Controls.Add(this.btnGetValues);
-            this.Controls.Add(this.lblSeconds);
-            this.Controls.Add(this.nudLogInterval);
-            this.Controls.Add(this.lblLoggingInterval);
-            this.Controls.Add(this.lblTime);
-            this.Controls.Add(this.dtpTime);
-            this.Controls.Add(this.btnSetValues);
-            this.MaximizeBox = false;
-            this.MinimizeBox = false;
-            this.Name = "frmDataloggerSettings";
-            this.Text = "Datalogger";
-            this.Load += new System.EventHandler(this.frmDataloggerSettings_Load);
-            ((System.ComponentModel.ISupportInitialize)(this.nudLogInterval)).EndInit();
-            this.ResumeLayout(false);
-            this.PerformLayout();
-
-        }
-
-        #endregion
-
-        private System.Windows.Forms.Button btnSetValues;
-        private System.Windows.Forms.DateTimePicker dtpTime;
-        private System.Windows.Forms.Label lblTime;
-        private System.Windows.Forms.Label lblLoggingInterval;
-        private System.Windows.Forms.NumericUpDown nudLogInterval;
-        private System.Windows.Forms.Label lblSeconds;
-        private System.Windows.Forms.Button btnGetValues;
-        private System.Windows.Forms.Label lblDate;
-        private System.Windows.Forms.DateTimePicker dtpDate;
-    }
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs
deleted file mode 100644
index c3d1e15645..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs
+++ /dev/null
@@ -1,179 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.ComponentModel;
-using System.Data;
-using System.Drawing;
-using System.Linq;
-using System.Text;
-using System.Windows.Forms;
-using Hid;
-
-namespace Project1HostApp
-{
-    public partial class frmDataloggerSettings : Form
-    {
-        private const int DEVICE_VID = 0x03EB;
-        private const int DEVICE_PID = 0x2063;
-
-        private struct Device_Report_t
-        {
-            public Byte Day;
-            public Byte Month;
-            public Byte Year;
-
-            public Byte Hour;
-            public Byte Minute;
-            public Byte Second;
-
-            public Byte LogInterval500MS;
-
-            public Byte[] ToReport()
-            {
-                Byte[] Report = new Byte[7];
-
-                Report[0] = this.Hour;
-                Report[1] = this.Minute;
-                Report[2] = this.Second;
-                Report[3] = this.Day;
-                Report[4] = this.Month;
-                Report[5] = this.Year;
-                Report[6] = this.LogInterval500MS;
-
-                return Report;
-            }
-
-            public void FromReport(Byte[] Report)
-            {
-                this.Hour = Report[0];
-                this.Minute = Report[1];
-                this.Second = Report[2];
-                this.Day = Report[3];
-                this.Month = Report[4];
-                this.Year = Report[5];
-                this.LogInterval500MS = Report[6];
-            }
-        };
-
-        private IDevice GetDeviceConnection()
-        {
-            IDevice[] ConnectedDevices = DeviceFactory.Enumerate(DEVICE_VID, DEVICE_PID);
-            IDevice ConnectionHandle = null;
-
-            if (ConnectedDevices.Count() > 0)
-                ConnectionHandle = ConnectedDevices[0];
-            else
-                return null;
-
-            // Fix report handle under Windows
-            if (ConnectionHandle is Hid.Win32.Win32DeviceSet)
-            {
-                ((Hid.Win32.Win32DeviceSet)ConnectionHandle).AddDevice(0x00,
-                    ((Hid.Win32.Win32DeviceSet)ConnectionHandle).UnallocatedDevices[0]);
-            }
-
-            return ConnectionHandle;
-        }
-
-        public frmDataloggerSettings()
-        {
-            InitializeComponent();
-        }
-
-        private void btnSetValues_Click(object sender, EventArgs e)
-        {
-            IDevice ConnectionHandle = GetDeviceConnection();
-
-            if (ConnectionHandle == null)
-            {
-                MessageBox.Show("Error: Cannot connect to Datalogger device.");
-                return;
-            }
-
-            Device_Report_t DeviceReport = new Device_Report_t();
-            DeviceReport.Day = (byte)dtpDate.Value.Day;
-            DeviceReport.Month = (byte)dtpDate.Value.Month;
-            DeviceReport.Year = (byte)((dtpDate.Value.Year < 2000) ? 0 : (dtpDate.Value.Year - 2000));
-            DeviceReport.Hour = (byte)dtpTime.Value.Hour;
-            DeviceReport.Minute = (byte)dtpTime.Value.Minute;
-            DeviceReport.Second = (byte)dtpTime.Value.Second;
-            DeviceReport.LogInterval500MS = (byte)(nudLogInterval.Value * 2);
-
-            try
-            {
-                ConnectionHandle.Write(0x00, DeviceReport.ToReport());
-                MessageBox.Show("Device parameters updated successfully.");
-            }
-            catch (Exception ex)
-            {
-                MessageBox.Show("Error: " + ex.Message);
-            }
-        }
-
-        private void btnGetValues_Click(object sender, EventArgs e)
-        {
-            IDevice ConnectionHandle = GetDeviceConnection();
-
-            if (ConnectionHandle == null)
-            {
-                MessageBox.Show("Error: Cannot connect to Datalogger device.");
-                return;
-            }
-
-            Device_Report_t DeviceReport = new Device_Report_t();
-
-            try
-            {
-                Byte[] Report = new Byte[7];
-
-                ConnectionHandle.Read(0x00, Report);
-                DeviceReport.FromReport(Report);
-                String msgText = "Device parameters retrieved successfully.";
-
-                try
-                {
-                    dtpDate.Value = new DateTime(
-                        (2000 + DeviceReport.Year),
-                        DeviceReport.Month,
-                        DeviceReport.Day);
-
-                    dtpTime.Value = new DateTime(
-                        DateTime.Now.Year, DateTime.Now.Month, DateTime.Now.Day,
-                        DeviceReport.Hour,
-                        DeviceReport.Minute,
-                        DeviceReport.Second);
-                }
-                catch (Exception ex)
-                {
-                    msgText = "Problem reading device:\n" +
-                        ex.Message +
-                        "\nY:" + DeviceReport.Year.ToString() +
-                        " M:" + DeviceReport.Month.ToString() +
-                        " D:" + DeviceReport.Day.ToString() +
-                        "\n\nUsing current date and time.";
-                    dtpDate.Value = DateTime.Now;
-                    dtpTime.Value = DateTime.Now;
-                }
-
-                try
-                {
-                    nudLogInterval.Value = (DeviceReport.LogInterval500MS / 2);
-                }
-                catch (Exception ex)
-                {
-                    nudLogInterval.Value = nudLogInterval.Minimum;
-                }
-
-                MessageBox.Show(msgText);
-            }
-            catch (Exception ex)
-            {
-                MessageBox.Show("Error: " + ex.Message);
-            }
-        }
-
-        private void frmDataloggerSettings_Load(object sender, EventArgs e)
-        {
-
-        }
-    }
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.resx b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.resx
deleted file mode 100644
index 19dc0dd8b3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.resx
+++ /dev/null
@@ -1,120 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<root>
-  <!-- 
-    Microsoft ResX Schema 
-    
-    Version 2.0
-    
-    The primary goals of this format is to allow a simple XML format 
-    that is mostly human readable. The generation and parsing of the 
-    various data types are done through the TypeConverter classes 
-    associated with the data types.
-    
-    Example:
-    
-    ... ado.net/XML headers & schema ...
-    <resheader name="resmimetype">text/microsoft-resx</resheader>
-    <resheader name="version">2.0</resheader>
-    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
-    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
-    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
-    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
-    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
-        <value>[base64 mime encoded serialized .NET Framework object]</value>
-    </data>
-    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
-        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
-        <comment>This is a comment</comment>
-    </data>
-                
-    There are any number of "resheader" rows that contain simple 
-    name/value pairs.
-    
-    Each data row contains a name, and value. The row also contains a 
-    type or mimetype. Type corresponds to a .NET class that support 
-    text/value conversion through the TypeConverter architecture. 
-    Classes that don't support this are serialized and stored with the 
-    mimetype set.
-    
-    The mimetype is used for serialized objects, and tells the 
-    ResXResourceReader how to depersist the object. This is currently not 
-    extensible. For a given mimetype the value must be set accordingly:
-    
-    Note - application/x-microsoft.net.object.binary.base64 is the format 
-    that the ResXResourceWriter will generate, however the reader can 
-    read any of the formats listed below.
-    
-    mimetype: application/x-microsoft.net.object.binary.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
-            : and then encoded with base64 encoding.
-    
-    mimetype: application/x-microsoft.net.object.soap.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
-            : and then encoded with base64 encoding.
-
-    mimetype: application/x-microsoft.net.object.bytearray.base64
-    value   : The object must be serialized into a byte array 
-            : using a System.ComponentModel.TypeConverter
-            : and then encoded with base64 encoding.
-    -->
-  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
-    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
-    <xsd:element name="root" msdata:IsDataSet="true">
-      <xsd:complexType>
-        <xsd:choice maxOccurs="unbounded">
-          <xsd:element name="metadata">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" />
-              </xsd:sequence>
-              <xsd:attribute name="name" use="required" type="xsd:string" />
-              <xsd:attribute name="type" type="xsd:string" />
-              <xsd:attribute name="mimetype" type="xsd:string" />
-              <xsd:attribute ref="xml:space" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="assembly">
-            <xsd:complexType>
-              <xsd:attribute name="alias" type="xsd:string" />
-              <xsd:attribute name="name" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="data">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
-              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
-              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
-              <xsd:attribute ref="xml:space" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="resheader">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" />
-            </xsd:complexType>
-          </xsd:element>
-        </xsd:choice>
-      </xsd:complexType>
-    </xsd:element>
-  </xsd:schema>
-  <resheader name="resmimetype">
-    <value>text/microsoft-resx</value>
-  </resheader>
-  <resheader name="version">
-    <value>2.0</value>
-  </resheader>
-  <resheader name="reader">
-    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-  <resheader name="writer">
-    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-</root>
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Hid.Linux.dll b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Hid.Linux.dll
deleted file mode 100644
index 4c19edd212..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Hid.Linux.dll
+++ /dev/null
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Hid.Net.dll b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Hid.Net.dll
deleted file mode 100644
index 2a7112fc09..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Hid.Net.dll
+++ /dev/null
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Hid.Win32.dll b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Hid.Win32.dll
deleted file mode 100644
index 3693c6ca04..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Hid.Win32.dll
+++ /dev/null
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Program.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Program.cs
deleted file mode 100644
index 2588e60c14..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Program.cs
+++ /dev/null
@@ -1,21 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Windows.Forms;
-
-namespace Project1HostApp
-{
-    static class Program
-    {
-        /// <summary>
-        /// The main entry point for the application.
-        /// </summary>
-        [STAThread]
-        static void Main()
-        {
-            Application.EnableVisualStyles();
-            Application.SetCompatibleTextRenderingDefault(false);
-            Application.Run(new frmDataloggerSettings());
-        }
-    }
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs
deleted file mode 100644
index a4d0ab1d5f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs
+++ /dev/null
@@ -1,36 +0,0 @@
-using System.Reflection;
-using System.Runtime.CompilerServices;
-using System.Runtime.InteropServices;
-
-// General Information about an assembly is controlled through the following 
-// set of attributes. Change these attribute values to modify the information
-// associated with an assembly.
-[assembly: AssemblyTitle("TempDataLoggerHostApp")]
-[assembly: AssemblyDescription("")]
-[assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("Dean Camera")]
-[assembly: AssemblyProduct("Temp Datalogger HostApp")]
-[assembly: AssemblyCopyright("Copyright © Dean Camera 2011")]
-[assembly: AssemblyTrademark("")]
-[assembly: AssemblyCulture("")]
-
-// Setting ComVisible to false makes the types in this assembly not visible 
-// to COM components.  If you need to access a type in this assembly from 
-// COM, set the ComVisible attribute to true on that type.
-[assembly: ComVisible(false)]
-
-// The following GUID is for the ID of the typelib if this project is exposed to COM
-[assembly: Guid("f41d67c7-13b2-4710-9e0f-f78e7f2bf2e9")]
-
-// Version information for an assembly consists of the following four values:
-//
-//      Major Version
-//      Minor Version 
-//      Build Number
-//      Revision
-//
-// You can specify all the values or you can default the Build and Revision Numbers 
-// by using the '*' as shown below:
-// [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.0")]
-[assembly: AssemblyFileVersion("1.0.0.0")]
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/Resources.Designer.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/Resources.Designer.cs
deleted file mode 100644
index 63b1af40d2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/Resources.Designer.cs
+++ /dev/null
@@ -1,63 +0,0 @@
-//------------------------------------------------------------------------------
-// <auto-generated>
-//     This code was generated by a tool.
-//     Runtime Version:4.0.30319.239
-//
-//     Changes to this file may cause incorrect behavior and will be lost if
-//     the code is regenerated.
-// </auto-generated>
-//------------------------------------------------------------------------------
-
-namespace TemperatureLoggerHostApp.Properties {
-    using System;
-    
-    
-    /// <summary>
-    ///   A strongly-typed resource class, for looking up localized strings, etc.
-    /// </summary>
-    // This class was auto-generated by the StronglyTypedResourceBuilder
-    // class via a tool like ResGen or Visual Studio.
-    // To add or remove a member, edit your .ResX file then rerun ResGen
-    // with the /str option, or rebuild your VS project.
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")]
-    [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
-    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    internal class Resources {
-        
-        private static global::System.Resources.ResourceManager resourceMan;
-        
-        private static global::System.Globalization.CultureInfo resourceCulture;
-        
-        [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
-        internal Resources() {
-        }
-        
-        /// <summary>
-        ///   Returns the cached ResourceManager instance used by this class.
-        /// </summary>
-        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
-        internal static global::System.Resources.ResourceManager ResourceManager {
-            get {
-                if (object.ReferenceEquals(resourceMan, null)) {
-                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("TemperatureLoggerHostApp.Properties.Resources", typeof(Resources).Assembly);
-                    resourceMan = temp;
-                }
-                return resourceMan;
-            }
-        }
-        
-        /// <summary>
-        ///   Overrides the current thread's CurrentUICulture property for all
-        ///   resource lookups using this strongly typed resource class.
-        /// </summary>
-        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
-        internal static global::System.Globalization.CultureInfo Culture {
-            get {
-                return resourceCulture;
-            }
-            set {
-                resourceCulture = value;
-            }
-        }
-    }
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/Resources.resx b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/Resources.resx
deleted file mode 100644
index af7dbebbac..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/Resources.resx
+++ /dev/null
@@ -1,117 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<root>
-  <!-- 
-    Microsoft ResX Schema 
-    
-    Version 2.0
-    
-    The primary goals of this format is to allow a simple XML format 
-    that is mostly human readable. The generation and parsing of the 
-    various data types are done through the TypeConverter classes 
-    associated with the data types.
-    
-    Example:
-    
-    ... ado.net/XML headers & schema ...
-    <resheader name="resmimetype">text/microsoft-resx</resheader>
-    <resheader name="version">2.0</resheader>
-    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
-    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
-    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
-    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
-    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
-        <value>[base64 mime encoded serialized .NET Framework object]</value>
-    </data>
-    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
-        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
-        <comment>This is a comment</comment>
-    </data>
-                
-    There are any number of "resheader" rows that contain simple 
-    name/value pairs.
-    
-    Each data row contains a name, and value. The row also contains a 
-    type or mimetype. Type corresponds to a .NET class that support 
-    text/value conversion through the TypeConverter architecture. 
-    Classes that don't support this are serialized and stored with the 
-    mimetype set.
-    
-    The mimetype is used for serialized objects, and tells the 
-    ResXResourceReader how to depersist the object. This is currently not 
-    extensible. For a given mimetype the value must be set accordingly:
-    
-    Note - application/x-microsoft.net.object.binary.base64 is the format 
-    that the ResXResourceWriter will generate, however the reader can 
-    read any of the formats listed below.
-    
-    mimetype: application/x-microsoft.net.object.binary.base64
-    value   : The object must be serialized with 
-            : System.Serialization.Formatters.Binary.BinaryFormatter
-            : and then encoded with base64 encoding.
-    
-    mimetype: application/x-microsoft.net.object.soap.base64
-    value   : The object must be serialized with 
-            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
-            : and then encoded with base64 encoding.
-
-    mimetype: application/x-microsoft.net.object.bytearray.base64
-    value   : The object must be serialized into a byte array 
-            : using a System.ComponentModel.TypeConverter
-            : and then encoded with base64 encoding.
-    -->
-  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
-    <xsd:element name="root" msdata:IsDataSet="true">
-      <xsd:complexType>
-        <xsd:choice maxOccurs="unbounded">
-          <xsd:element name="metadata">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" />
-              <xsd:attribute name="type" type="xsd:string" />
-              <xsd:attribute name="mimetype" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="assembly">
-            <xsd:complexType>
-              <xsd:attribute name="alias" type="xsd:string" />
-              <xsd:attribute name="name" type="xsd:string" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="data">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
-              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
-              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
-            </xsd:complexType>
-          </xsd:element>
-          <xsd:element name="resheader">
-            <xsd:complexType>
-              <xsd:sequence>
-                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
-              </xsd:sequence>
-              <xsd:attribute name="name" type="xsd:string" use="required" />
-            </xsd:complexType>
-          </xsd:element>
-        </xsd:choice>
-      </xsd:complexType>
-    </xsd:element>
-  </xsd:schema>
-  <resheader name="resmimetype">
-    <value>text/microsoft-resx</value>
-  </resheader>
-  <resheader name="version">
-    <value>2.0</value>
-  </resheader>
-  <resheader name="reader">
-    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-  <resheader name="writer">
-    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
-  </resheader>
-</root>
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/Settings.Designer.cs b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/Settings.Designer.cs
deleted file mode 100644
index 95fc3ad588..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/Settings.Designer.cs
+++ /dev/null
@@ -1,26 +0,0 @@
-//------------------------------------------------------------------------------
-// <auto-generated>
-//     This code was generated by a tool.
-//     Runtime Version:4.0.30319.239
-//
-//     Changes to this file may cause incorrect behavior and will be lost if
-//     the code is regenerated.
-// </auto-generated>
-//------------------------------------------------------------------------------
-
-namespace TemperatureLoggerHostApp.Properties {
-    
-    
-    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "10.0.0.0")]
-    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
-        
-        private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
-        
-        public static Settings Default {
-            get {
-                return defaultInstance;
-            }
-        }
-    }
-}
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/Settings.settings b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/Settings.settings
deleted file mode 100644
index 39645652af..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/Properties/Settings.settings
+++ /dev/null
@@ -1,7 +0,0 @@
-<?xml version='1.0' encoding='utf-8'?>
-<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)">
-  <Profiles>
-    <Profile Name="(Default)" />
-  </Profiles>
-  <Settings />
-</SettingsFile>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/README.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/README.txt
deleted file mode 100644
index ab6b9a83a7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/README.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-http://en.sourceforge.jp/projects/sfnet_libhidnet/
-
-This library has been tested on Windows Vista 32bit, Windows Vista 64bit,
-Windows XP 32bit and Debian (Lenny) AMD64 but should work on any version of
-Windows that can run the .NET framework 2.0 and any other operating system
-that has both hiddev and Mono.
-
-Any additions must be tested and work on Windows and Linux, on both 32 and
-64 bit. Windows 64 bit testing is particularly important as it is often
-neglected.
-
-
-Hid.Linux.dll was compiled under Linux with Mono (mcs) and uses no generics.
-
-Hid.Win32.dll and Hid.Net.dll were compiled under Windows with the .NET
-Framework v2.0.50727 but are also tested to compile with Mono (gmcs).
-
-
-A good starting point when using this library is Hid.DeviceFactory's Enumerate
-methods.
-
-LogitechMX5000.cs is a simple example of how the library can be used. Other
-examples on common devices are welcomed.
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/TempLoggerHostApp.csproj b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/TempLoggerHostApp.csproj
deleted file mode 100644
index 8517d6f42a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp/TempLoggerHostApp.csproj
+++ /dev/null
@@ -1,99 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
-  <PropertyGroup>
-    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
-    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
-    <ProductVersion>9.0.21022</ProductVersion>
-    <SchemaVersion>2.0</SchemaVersion>
-    <ProjectGuid>{A2D66069-8CF9-4104-828C-49A73D7DB5D1}</ProjectGuid>
-    <OutputType>WinExe</OutputType>
-    <AppDesignerFolder>Properties</AppDesignerFolder>
-    <RootNamespace>TemperatureLoggerHostApp</RootNamespace>
-    <AssemblyName>TemperatureLoggerHostApp</AssemblyName>
-    <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
-    <FileAlignment>512</FileAlignment>
-    <FileUpgradeFlags>
-    </FileUpgradeFlags>
-    <OldToolsVersion>3.5</OldToolsVersion>
-    <UpgradeBackupLocation />
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
-    <DebugSymbols>true</DebugSymbols>
-    <DebugType>full</DebugType>
-    <Optimize>false</Optimize>
-    <OutputPath>bin\Debug\</OutputPath>
-    <DefineConstants>DEBUG;TRACE</DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
-    <DebugType>pdbonly</DebugType>
-    <Optimize>true</Optimize>
-    <OutputPath>bin\Release\</OutputPath>
-    <DefineConstants>TRACE</DefineConstants>
-    <ErrorReport>prompt</ErrorReport>
-    <WarningLevel>4</WarningLevel>
-  </PropertyGroup>
-  <ItemGroup>
-    <Reference Include="Hid.Net, Version=1.0.0.0, Culture=neutral, processorArchitecture=MSIL">
-      <SpecificVersion>False</SpecificVersion>
-      <HintPath>.\Hid.Net.dll</HintPath>
-    </Reference>
-    <Reference Include="System" />
-    <Reference Include="System.Core">
-      <RequiredTargetFramework>3.5</RequiredTargetFramework>
-    </Reference>
-    <Reference Include="System.Xml.Linq">
-      <RequiredTargetFramework>3.5</RequiredTargetFramework>
-    </Reference>
-    <Reference Include="System.Data.DataSetExtensions">
-      <RequiredTargetFramework>3.5</RequiredTargetFramework>
-    </Reference>
-    <Reference Include="System.Data" />
-    <Reference Include="System.Deployment" />
-    <Reference Include="System.Drawing" />
-    <Reference Include="System.Windows.Forms" />
-    <Reference Include="System.Xml" />
-  </ItemGroup>
-  <ItemGroup>
-    <Compile Include="DataLoggerSettings.cs">
-      <SubType>Form</SubType>
-    </Compile>
-    <Compile Include="DataLoggerSettings.Designer.cs">
-      <DependentUpon>DataLoggerSettings.cs</DependentUpon>
-    </Compile>
-    <Compile Include="Program.cs" />
-    <Compile Include="Properties\AssemblyInfo.cs" />
-    <EmbeddedResource Include="DataLoggerSettings.resx">
-      <DependentUpon>DataLoggerSettings.cs</DependentUpon>
-      <SubType>Designer</SubType>
-    </EmbeddedResource>
-    <EmbeddedResource Include="Properties\Resources.resx">
-      <Generator>ResXFileCodeGenerator</Generator>
-      <LastGenOutput>Resources.Designer.cs</LastGenOutput>
-      <SubType>Designer</SubType>
-    </EmbeddedResource>
-    <Compile Include="Properties\Resources.Designer.cs">
-      <AutoGen>True</AutoGen>
-      <DependentUpon>Resources.resx</DependentUpon>
-      <DesignTime>True</DesignTime>
-    </Compile>
-    <None Include="Properties\Settings.settings">
-      <Generator>SettingsSingleFileGenerator</Generator>
-      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
-    </None>
-    <Compile Include="Properties\Settings.Designer.cs">
-      <AutoGen>True</AutoGen>
-      <DependentUpon>Settings.settings</DependentUpon>
-      <DesignTimeSharedInput>True</DesignTimeSharedInput>
-    </Compile>
-  </ItemGroup>
-  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
-  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
-       Other similar extension points exist, see Microsoft.Common.targets.
-  <Target Name="BeforeBuild">
-  </Target>
-  <Target Name="AfterBuild">
-  </Target>
-  -->
-</Project>
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp_Python/temp_log_config.py b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp_Python/temp_log_config.py
deleted file mode 100644
index 5a6bf2da11..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TempLogHostApp_Python/temp_log_config.py
+++ /dev/null
@@ -1,99 +0,0 @@
-"""
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-"""
-
-"""
-    Front-end configuration app for the TempDataLogger project. This script
-    configures the logger to the current system time and date, with a user
-    defined logging interval.
-
-    The logging interval should be specified in milliseconds and is rounded to
-    a multiple of 500ms.
-
-    Usage:
-        python temp_log_config.py <Log_Interval>
-
-    Example:
-        python temp_log_config.py 500
-
-    Requires the pywinusb library (https://pypi.python.org/pypi/pywinusb/).
-"""
-
-import sys
-from datetime import datetime
-import pywinusb.hid as hid
-
-# Generic HID device VID, PID and report payload length (length is increased
-# by one to account for the Report ID byte that must be pre-pended)
-device_vid = 0x03EB
-device_pid = 0x2063
-report_length = 1 + 7
-
-
-def get_hid_device_handle():
-    hid_device_filter = hid.HidDeviceFilter(vendor_id=device_vid,
-                                            product_id=device_pid)
-
-    valid_hid_devices = hid_device_filter.get_devices()
-
-    if len(valid_hid_devices) is 0:
-        return None
-    else:
-        return valid_hid_devices[0]
-
-
-def configure_temp_log_device(device, time_date, log_interval_500ms):
-    # Report data for the demo is the report ID (always zero)
-    report_data = [0]
-
-    # Followed by the time/date data
-    report_data.extend([time_date.hour, time_date.minute,
-                        time_date.second, time_date.day,
-                        time_date.month, time_date.year - 2000])
-
-    # Lastly the log interval in 500ms units of time
-    report_data.extend([log_interval_500ms])
-
-    # Zero-extend the array to the length the report should be
-    report_data.extend([0] * (report_length - len(report_data)))
-
-    # Send the generated report to the device
-    device.send_output_report(report_data)
-
-
-def main(time_date, log_interval_500ms):
-    hid_device = get_hid_device_handle()
-
-    if hid_device is None:
-        print("No valid HID device found.")
-        sys.exit(1)
-
-    try:
-        hid_device.open()
-
-        print("Connected to device 0x%04X/0x%04X - %s [%s]" %
-              (hid_device.vendor_id, hid_device.product_id,
-               hid_device.product_name, hid_device.vendor_name))
-
-        configure_temp_log_device(hid_device, time_date, log_interval_500ms)
-
-        print("Time/Date is now set to %s" % time_date)
-        print("Log interval is now set to every %0.1fs" % (log_interval_500ms * (500.0 / 1000.0)))
-
-    finally:
-        hid_device.close()
-
-
-if __name__ == '__main__':
-    time_date = datetime.now()
-    log_interval_500ms = (int(sys.argv[1]) / 500) if len(sys.argv) > 1 else 2
-
-    # Clamp the log interval to the allowable range
-    log_interval_500ms = max(log_interval_500ms, 0x01)
-    log_interval_500ms = min(log_interval_500ms, 0xFF)
-
-    main(time_date, log_interval_500ms)
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TemperatureDataLogger.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TemperatureDataLogger.txt
deleted file mode 100644
index 4d4e0b5e84..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/TemperatureDataLogger.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Temperature Datalogger Project
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4) - <i>those with >16KB of FLASH memory only</i>
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Classes:</b></td>
- *    <td>Mass Storage Device \n
- *        Human Interface Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclasses:</b></td>
- *    <td>Bulk-Only Transport \n
- *        Keyboard Subclass</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Mass Storage Standard \n
- *        USB Bulk-Only Transport Standard \n
- *        SCSI Primary Commands Specification \n
- *        SCSI Block Commands Specification \n
- *        USBIF HID Specification, USBIF HID Usage Tables</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Temperature Data Logger project. This project is a very basic USB data logger for the current temperature as reported by
- *  the board's temperature sensor, writing the temperature to a file stored on the board's Dataflash in a FAT filesystem
- *  each time a specified interval elapses. When inserted into a PC, the datalogger will appear as a standard USB Mass Storage
- *  device with a single text file, which contains the logged data. Files are named according to the current date when the
- *  logging commences.
- *
- *  A DS1307 or compatible RTC IC is designed to be attached to the AVR's TWI bus, for the management of timestamps on the
- *  sampled data. This project will not function correctly if the RTC chip is omitted unless the DUMMY_RTC compile time token
- *  is specified - see \ref Sec_Options.
- *
- *  Due to the host's need for exclusive access to the file system, the device will not log samples while connected to a host.
- *  For the logger to store data, the Dataflash must first be formatted by the host so that it contains a valid FAT file system.
- *
- *  This project uses the FatFS library from ELM Chan (http://elm-chan.org/fsw/ff/00index_e.html) and the .NET HID device library
- *  LibHIDNet (http://sourceforge.net/projects/libhidnet/).
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>DUMMY_RTC</td>
- *    <td>AppConfig.h</td>
- *    <td>When a DS1307 RTC chip is not fitted, this token can be defined to make the demo use a dummy software RTC using the system
- *        clock. This is less accurate and does not store the set time and date into non-volatile memory.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/asf.xml
deleted file mode 100644
index bf7ee2c3f0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/asf.xml
+++ /dev/null
@@ -1,72 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="Temperature Datalogger" id="lufa.projects.temp_datalogger.avr8">

-		<require idref="lufa.projects.temp_datalogger"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.projects.temp_datalogger" caption="Temperature Datalogger">

-		<info type="description" value="summary">

-		Temperature Datalogger project.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="HID Class"/>

-			<keyword value="Mass Storage Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="TemperatureDataLogger.txt"/>

-		<build type="distribute" subtype="directory" value="TempLogHostApp"/>

-		<build type="distribute" subtype="directory" value="TempLogHostApp_Python"/>

-

-		<build type="c-source" value="TempDataLogger.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="TempDataLogger.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="c-source" value="Lib/DataflashManager.c"/>

-		<build type="header-file" value="Lib/DataflashManager.h"/>

-		<build type="c-source" value="Lib/RTC.c"/>

-		<build type="header-file" value="Lib/RTC.h"/>

-		<build type="c-source" value="Lib/SCSI.c"/>

-		<build type="header-file" value="Lib/SCSI.h"/>

-

-		<build type="include-path" value="Lib/FATFs/"/>

-		<build type="c-source" value="Lib/FATFs/ff.c"/>

-		<build type="header-file" value="Lib/FATFs/ff.h"/>

-		<build type="c-source" value="Lib/FATFs/diskio.c"/>

-		<build type="header-file" value="Lib/FATFs/diskio.h"/>

-		<build type="header-file" value="Lib/FATFs/ffconf.h"/>

-		<build type="header-file" value="Lib/FATFs/integer.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.temperature"/>

-		<require idref="lufa.drivers.board.dataflash"/>

-		<require idref="lufa.drivers.peripheral.adc"/>

-		<require idref="lufa.drivers.peripheral.twi"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/doxyfile
deleted file mode 100644
index a9f3353794..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/doxyfile
+++ /dev/null
@@ -1,2366 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "Temperature Datalogger Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/ \
-                         TempLogHostApp/ \
-                         TempLogHostApp_Python/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/makefile
deleted file mode 100644
index eb662f66bf..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/TempDataLogger/makefile
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = TempDataLogger
-SRC          = $(TARGET).c Descriptors.c Lib/DataflashManager.c Lib/RTC.c Lib/SCSI.c Lib/FATFs/diskio.c Lib/FATFs/ff.c \
-               $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL) $(LUFA_SRC_TWI) $(LUFA_SRC_TEMPERATURE)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/Config/LUFAConfig.h
deleted file mode 100644
index 4d5f58a4ac..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-		#define DEVICE_STATE_AS_GPIOR            0
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              0
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/Descriptors.c
deleted file mode 100644
index 1000c4a343..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/Descriptors.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = CDC_CSCP_CDCClass,
-	.SubClass               = CDC_CSCP_NoSpecificSubclass,
-	.Protocol               = CDC_CSCP_NoSpecificProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x204B,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 2,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.CDC_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x06,
-		},
-
-	.CDC_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
-		},
-
-	.CDC_NotificationEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA USB-RS232 Adapter");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/Descriptors.h
deleted file mode 100644
index ce014c632a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/Descriptors.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-	/* Macros: */
-		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 2)
-
-		/** Endpoint address of the CDC device-to-host data IN endpoint. */
-		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
-		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPSIZE        8
-
-		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                16
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t    Config;
-
-			// CDC Command Interface
-			USB_Descriptor_Interface_t               CDC_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
-			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
-
-			// CDC Data Interface
-			USB_Descriptor_Interface_t               CDC_DCI_Interface;
-			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
-			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/LUFA USBtoSerial.inf b/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/LUFA USBtoSerial.inf
deleted file mode 100644
index b00fab6a44..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/LUFA USBtoSerial.inf
+++ /dev/null
@@ -1,66 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-;************************************************************
-
-[DefaultInstall]
-CopyINF="LUFA USBtoSerial.inf"
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-DriverVer=7/1/2012,10.0.0.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
-
-[SourceDisksNames]
-
-[SourceDisksFiles]
-
-[DestinationDirs]
-DefaultDestDir=12
-
-[DriverInstall]
-Include=mdmcpq.inf
-CopyFiles=FakeModemCopyFileSection
-AddReg=DriverInstall.AddReg
-
-[DriverInstall.Services]
-Include=mdmcpq.inf
-AddService=usbser, 0x00000002, LowerFilter_Service_Inst
-
-[DriverInstall.AddReg]
-HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204B
-
-[DeviceList.NTx86]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204B
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204B
-
-[DeviceList.NTia64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204B
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGNAME="http://www.lufa-lib.org"
-DESCRIPTION="LUFA USB to Serial"
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/USBtoSerial.c b/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/USBtoSerial.c
deleted file mode 100644
index 343b51ba5c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/USBtoSerial.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the USBtoSerial project. This file contains the main tasks of
- *  the project and is responsible for the initial application hardware configuration.
- */
-
-#include "USBtoSerial.h"
-
-/** Circular buffer to hold data from the host before it is sent to the device via the serial port. */
-static RingBuffer_t USBtoUSART_Buffer;
-
-/** Underlying data buffer for \ref USBtoUSART_Buffer, where the stored bytes are located. */
-static uint8_t      USBtoUSART_Buffer_Data[128];
-
-/** Circular buffer to hold data from the serial port before it is sent to the host. */
-static RingBuffer_t USARTtoUSB_Buffer;
-
-/** Underlying data buffer for \ref USARTtoUSB_Buffer, where the stored bytes are located. */
-static uint8_t      USARTtoUSB_Buffer_Data[128];
-
-/** LUFA CDC Class driver interface configuration and state information. This structure is
- *  passed to all CDC Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
-	{
-		.Config =
-			{
-				.ControlInterfaceNumber         = INTERFACE_ID_CDC_CCI,
-				.DataINEndpoint                 =
-					{
-						.Address                = CDC_TX_EPADDR,
-						.Size                   = CDC_TXRX_EPSIZE,
-						.Banks                  = 1,
-					},
-				.DataOUTEndpoint                =
-					{
-						.Address                = CDC_RX_EPADDR,
-						.Size                   = CDC_TXRX_EPSIZE,
-						.Banks                  = 1,
-					},
-				.NotificationEndpoint           =
-					{
-						.Address                = CDC_NOTIFICATION_EPADDR,
-						.Size                   = CDC_NOTIFICATION_EPSIZE,
-						.Banks                  = 1,
-					},
-			},
-	};
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	RingBuffer_InitBuffer(&USBtoUSART_Buffer, USBtoUSART_Buffer_Data, sizeof(USBtoUSART_Buffer_Data));
-	RingBuffer_InitBuffer(&USARTtoUSB_Buffer, USARTtoUSB_Buffer_Data, sizeof(USARTtoUSB_Buffer_Data));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		/* Only try to read in bytes from the CDC interface if the transmit buffer is not full */
-		if (!(RingBuffer_IsFull(&USBtoUSART_Buffer)))
-		{
-			int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
-
-			/* Store received byte into the USART transmit buffer */
-			if (!(ReceivedByte < 0))
-			  RingBuffer_Insert(&USBtoUSART_Buffer, ReceivedByte);
-		}
-
-		uint16_t BufferCount = RingBuffer_GetCount(&USARTtoUSB_Buffer);
-		if (BufferCount)
-		{
-			Endpoint_SelectEndpoint(VirtualSerial_CDC_Interface.Config.DataINEndpoint.Address);
-
-			/* Check if a packet is already enqueued to the host - if so, we shouldn't try to send more data
-			 * until it completes as there is a chance nothing is listening and a lengthy timeout could occur */
-			if (Endpoint_IsINReady())
-			{
-				/* Never send more than one bank size less one byte to the host at a time, so that we don't block
-				 * while a Zero Length Packet (ZLP) to terminate the transfer is sent if the host isn't listening */
-				uint8_t BytesToSend = MIN(BufferCount, (CDC_TXRX_EPSIZE - 1));
-
-				/* Read bytes from the USART receive buffer into the USB IN endpoint */
-				while (BytesToSend--)
-				{
-					/* Try to send the next byte of data to the host, abort if there is an error without dequeuing */
-					if (CDC_Device_SendByte(&VirtualSerial_CDC_Interface,
-											RingBuffer_Peek(&USARTtoUSB_Buffer)) != ENDPOINT_READYWAIT_NoError)
-					{
-						break;
-					}
-
-					/* Dequeue the already sent byte from the buffer now we have confirmed that no transmission error occurred */
-					RingBuffer_Remove(&USARTtoUSB_Buffer);
-				}
-			}
-		}
-
-		/* Load the next byte from the USART transmit buffer into the USART if transmit buffer space is available */
-		if (Serial_IsSendReady() && !(RingBuffer_IsEmpty(&USBtoUSART_Buffer)))
-		  Serial_SendByte(RingBuffer_Remove(&USBtoUSART_Buffer));
-
-		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
-}
-
-/** ISR to manage the reception of data from the serial port, placing received bytes into a circular buffer
- *  for later transmission to the host.
- */
-ISR(USART1_RX_vect, ISR_BLOCK)
-{
-	uint8_t ReceivedByte = UDR1;
-
-	if ((USB_DeviceState == DEVICE_STATE_Configured) && !(RingBuffer_IsFull(&USARTtoUSB_Buffer)))
-	  RingBuffer_Insert(&USARTtoUSB_Buffer, ReceivedByte);
-}
-
-/** Event handler for the CDC Class driver Line Encoding Changed event.
- *
- *  \param[in] CDCInterfaceInfo  Pointer to the CDC class interface configuration structure being referenced
- */
-void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
-{
-	uint8_t ConfigMask = 0;
-
-	switch (CDCInterfaceInfo->State.LineEncoding.ParityType)
-	{
-		case CDC_PARITY_Odd:
-			ConfigMask = ((1 << UPM11) | (1 << UPM10));
-			break;
-		case CDC_PARITY_Even:
-			ConfigMask = (1 << UPM11);
-			break;
-	}
-
-	if (CDCInterfaceInfo->State.LineEncoding.CharFormat == CDC_LINEENCODING_TwoStopBits)
-	  ConfigMask |= (1 << USBS1);
-
-	switch (CDCInterfaceInfo->State.LineEncoding.DataBits)
-	{
-		case 6:
-			ConfigMask |= (1 << UCSZ10);
-			break;
-		case 7:
-			ConfigMask |= (1 << UCSZ11);
-			break;
-		case 8:
-			ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10));
-			break;
-	}
-
-	/* Keep the TX line held high (idle) while the USART is reconfigured */
-	PORTD |= (1 << 3);
-
-	/* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */
-	UCSR1B = 0;
-	UCSR1A = 0;
-	UCSR1C = 0;
-
-	/* Set the new baud rate before configuring the USART */
-	UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
-
-	/* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */
-	UCSR1C = ConfigMask;
-	UCSR1A = (1 << U2X1);
-	UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
-
-	/* Release the TX line after the USART has been reconfigured */
-	PORTD &= ~(1 << 3);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/USBtoSerial.h b/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/USBtoSerial.h
deleted file mode 100644
index afa3e43d3f..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/USBtoSerial.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for USBtoSerial.c.
- */
-
-#ifndef _USB_SERIAL_H_
-#define _USB_SERIAL_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/interrupt.h>
-		#include <avr/power.h>
-
-		#include "Descriptors.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Peripheral/Serial.h>
-		#include <LUFA/Drivers/Misc/RingBuffer.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY      LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  (LEDS_LED2 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        (LEDS_LED2 | LEDS_LED4)
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        (LEDS_LED1 | LEDS_LED3)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-		void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/USBtoSerial.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/USBtoSerial.txt
deleted file mode 100644
index 0620f93938..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/USBtoSerial.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage USB to Serial Converter Project
- *
- *  \section Sec_Compat Project Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this project.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  USB to Serial bridge project. This project allows a USB AVR to serve
- *  as a USB to USART bridge between a USB host and a device lacking a
- *  USB port. When programmed into a USB AVR, the AVR will enumerate as a
- *  virtual COM port.
- *
- *  The AVR's hardware USART's settings will change to mirror as closely as
- *  possible the serial settings set on the host. However, due to hardware
- *  limitations, some options may not be supported (baud rates with unacceptable
- *  error rates at the AVR's clock speed, data lengths other than 6, 7 or 8 bits,
- *  1.5 stop bits, parity other than none, even or odd).
- *
- *  After running this project for the first time on a new computer,
- *  you will need to supply the .INF file located in this project
- *  project's directory as the device's driver when running under
- *  Windows. This will enable Windows to use its inbuilt CDC drivers,
- *  negating the need for custom drivers for the device. Other
- *  Operating Systems should automatically use their own inbuilt
- *  CDC-ACM drivers.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/asf.xml
deleted file mode 100644
index 5afcafe7c2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/asf.xml
+++ /dev/null
@@ -1,51 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="USB to Serial Converter" id="lufa.projects.usb_to_serial.avr8">

-		<require idref="lufa.projects.usb_to_serial"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.projects.usb_to_serial" caption="USB to Serial Converter">

-		<info type="description" value="summary">

-		USB to Serial USART converter project.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="CDC Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="USBtoSerial.txt"/>

-		<build type="distribute" subtype="user-file" value="LUFA USBtoSerial.inf"/>

-

-		<build type="c-source" value="USBtoSerial.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="USBtoSerial.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.peripheral.usart"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.misc.ringbuffer"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/doxyfile
deleted file mode 100644
index d5e415aa66..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - USB to Serial Device Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/makefile
deleted file mode 100644
index 72daabd900..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/USBtoSerial/makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = USBtoSerial
-SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Config/AppConfig.h
deleted file mode 100644
index 40ebe7ddc1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Config/AppConfig.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define ENABLE_DHCP_CLIENT
-	#define ENABLE_DHCP_SERVER
-	#define ENABLE_TELNET_SERVER
-	#define MAX_URI_LENGTH                50
-
-	#define DEVICE_IP_ADDRESS             (uint8_t[]){ 10,   0,   0,   2}
-	#define DEVICE_NETMASK                (uint8_t[]){255, 255, 255,   0}
-	#define DEVICE_GATEWAY                (uint8_t[]){ 10,   0,   0,   1}
-	#define SERVER_MAC_ADDRESS            (uint8_t[]){  1,   0,   1,   0,   1,   0}
-
-	#define UIP_CONF_UDP                  (defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER))
-	#define UIP_CONF_BROADCAST            1
-	#define UIP_CONF_TCP                  1
-	#define UIP_CONF_UDP_CONNS            1
-	#define UIP_CONF_MAX_CONNECTIONS      3
-	#define UIP_CONF_MAX_LISTENPORTS      5
-	#define UIP_CONF_BUFFER_SIZE          1514
-	#define UIP_CONF_LL_802154            0
-	#define UIP_CONF_LL_80211             0
-	#define UIP_CONF_ROUTER               0
-	#define UIP_CONF_ICMP6                0
-	#define UIP_CONF_ICMP_DEST_UNREACH    1
-	#define UIP_URGDATA                   0
-	#define UIP_ARCH_CHKSUM               0
-	#define UIP_ARCH_ADD32                0
-	#define UIP_NEIGHBOR_CONF_ADDRTYPE    0
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Config/LUFAConfig.h
deleted file mode 100644
index fa407999e1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-//		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-//		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-//		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      8
-		#define DEVICE_STATE_AS_GPIOR            0
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-		#define INTERRUPT_CONTROL_ENDPOINT
-//		#define NO_DEVICE_REMOTE_WAKEUP
-//		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-		#define HOST_STATE_AS_GPIOR              0
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Descriptors.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Descriptors.c
deleted file mode 100644
index 7be6e4b217..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Descriptors.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "Descriptors.h"
-
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = USB_CSCP_IADDeviceClass,
-	.SubClass               = USB_CSCP_IADDeviceSubclass,
-	.Protocol               = USB_CSCP_IADDeviceProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x2069,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
-	.ProductStrIndex        = STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 3,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = USB_CONFIG_ATTR_RESERVED,
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.CDC_IAD =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation},
-
-			.FirstInterfaceIndex    = INTERFACE_ID_CDC_CCI,
-			.TotalInterfaces        = 2,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_VendorSpecificProtocol,
-
-			.IADStrIndex            = NO_DESCRIPTOR
-		},
-
-	.CDC_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_VendorSpecificProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x00,
-		},
-
-	.CDC_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
-		},
-
-	.CDC_NotificationEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.RNDIS_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.RNDIS_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.MS_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_MassStorage,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = MS_CSCP_MassStorageClass,
-			.SubClass               = MS_CSCP_SCSITransparentSubclass,
-			.Protocol               = MS_CSCP_BulkOnlyTransportProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.MS_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MASS_STORAGE_IN_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.MS_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = MASS_STORAGE_OUT_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = MASS_STORAGE_IO_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA Webserver");
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &ConfigurationDescriptor;
-			Size    = sizeof(USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case STRING_ID_Language:
-					Address = &LanguageString;
-					Size    = pgm_read_byte(&LanguageString.Header.Size);
-					break;
-				case STRING_ID_Manufacturer:
-					Address = &ManufacturerString;
-					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
-					break;
-				case STRING_ID_Product:
-					Address = &ProductString;
-					Size    = pgm_read_byte(&ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Descriptors.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Descriptors.h
deleted file mode 100644
index 6b656e4b6e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Descriptors.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Descriptors.c.
- */
-
-#ifndef _DESCRIPTORS_H_
-#define _DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the Mass Storage device-to-host data IN endpoint. */
-		#define MASS_STORAGE_IN_EPADDR         (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */
-		#define MASS_STORAGE_OUT_EPADDR        (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the Mass Storage data endpoints. */
-		#define MASS_STORAGE_IO_EPSIZE         64
-
-		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 5)
-
-		/** Endpoint address of the CDC device-to-host data IN endpoint. */
-		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 1)
-
-		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
-		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 2)
-
-		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPSIZE        8
-
-		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                64
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t  Config;
-
-			// RNDIS CDC Command Interface
-			USB_Descriptor_Interface_Association_t CDC_IAD;
-			USB_Descriptor_Interface_t             CDC_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t  CDC_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t     CDC_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t   CDC_Functional_Union;
-			USB_Descriptor_Endpoint_t              CDC_NotificationEndpoint;
-
-			// RNDIS CDC Data Interface
-			USB_Descriptor_Interface_t             CDC_DCI_Interface;
-			USB_Descriptor_Endpoint_t              RNDIS_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t              RNDIS_DataInEndpoint;
-
-			// Mass Storage Interface
-			USB_Descriptor_Interface_t             MS_Interface;
-			USB_Descriptor_Endpoint_t              MS_DataInEndpoint;
-			USB_Descriptor_Endpoint_t              MS_DataOutEndpoint;
-		} USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum InterfaceDescriptors_t
-		{
-			INTERFACE_ID_CDC_CCI     = 0, /**< CDC CCI interface descriptor ID */
-			INTERFACE_ID_CDC_DCI     = 1, /**< CDC DCI interface descriptor ID */
-			INTERFACE_ID_MassStorage = 2, /**< Mass storage interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum StringDescriptors_t
-		{
-			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/LUFA Webserver RNDIS.inf b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/LUFA Webserver RNDIS.inf
deleted file mode 100644
index c77de8f6bb..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/LUFA Webserver RNDIS.inf
+++ /dev/null
@@ -1,59 +0,0 @@
-;     Windows LUFA RNDIS Setup File
-; Copyright (c) 2000 Microsoft Corporation
-
-[DefaultInstall]
-CopyINF="LUFA Webserver RNDIS.inf"
-
-[Version]
-Signature="$Windows NT$"
-Class=Net
-ClassGuid={4d36e972-e325-11ce-bfc1-08002be10318}
-Provider=%MFGNAME%
-DriverVer=7/1/2012,10.0.0.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
-
-[ControlFlags]
-ExcludeFromSelect=*
-
-[DriverInstall]
-Characteristics=0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType=15
-include=netrndis.inf
-needs=Usb_Rndis.ndi
-AddReg=Rndis_AddReg_Vista
-
-[DriverInstall.Services]
-include=netrndis.inf
-needs=Usb_Rndis.ndi.Services
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2069
-
-[DeviceList.NTx86]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2069
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2069
-
-[DeviceList.NTia64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2069
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGNAME="http://www.lufa-lib.org"
-DESCRIPTION="LUFA USB RNDIS Demo"
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPClientApp.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPClientApp.c
deleted file mode 100644
index 3b1d2d7028..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPClientApp.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  DHCP Client Application. When connected to the uIP stack, this will retrieve IP configuration settings from the
- *  DHCP server on the network.
- */
-
-#define  INCLUDE_FROM_DHCPCLIENTAPP_C
-#include "DHCPClientApp.h"
-
-#if defined(ENABLE_DHCP_CLIENT) || defined(__DOXYGEN__)
-
-/** Initialization function for the DHCP client. */
-void DHCPClientApp_Init(void)
-{
-	/* Create a new UDP connection to the DHCP server port for the DHCP solicitation */
-	struct uip_udp_conn* Connection = uip_udp_new(&uip_broadcast_addr, HTONS(DHCP_SERVER_PORT));
-
-	/* If the connection was successfully created, bind it to the local DHCP client port */
-	if (Connection != NULL)
-	{
-		uip_udp_appstate_t* const AppState = &Connection->appstate;
-		uip_udp_bind(Connection, HTONS(DHCP_CLIENT_PORT));
-
-		/* Set the initial client state */
-		AppState->DHCPClient.CurrentState = DHCP_STATE_SendDiscover;
-
-		/* Set timeout period to half a second for a DHCP server to respond */
-		timer_set(&AppState->DHCPClient.Timeout, CLOCK_SECOND / 2);
-	}
-}
-
-/** uIP stack application callback for the DHCP client. This function must be called each time the TCP/IP stack
- *  needs a UDP packet to be processed.
- */
-void DHCPClientApp_Callback(void)
-{
-	uip_udp_appstate_t* const AppState    = &uip_udp_conn->appstate;
-	DHCP_Header_t*      const AppData     = (DHCP_Header_t*)uip_appdata;
-	uint16_t                  AppDataSize = 0;
-
-	switch (AppState->DHCPClient.CurrentState)
-	{
-		case DHCP_STATE_SendDiscover:
-			/* Clear all DHCP settings, reset client IP address */
-			memset(&AppState->DHCPClient.DHCPOffer_Data, 0x00, sizeof(AppState->DHCPClient.DHCPOffer_Data));
-			uip_sethostaddr((uip_ipaddr_t*)&AppState->DHCPClient.DHCPOffer_Data.AllocatedIP);
-
-			/* Fill out the DHCP response header */
-			AppDataSize += DHCPClientApp_FillDHCPHeader(AppData, DHCP_DISCOVER, AppState);
-
-			/* Add the required DHCP options list to the packet */
-			uint8_t RequiredOptionList[] = {DHCP_OPTION_SUBNET_MASK, DHCP_OPTION_ROUTER, DHCP_OPTION_DNS_SERVER};
-			AppDataSize += DHCPCommon_SetOption(AppData->Options, DHCP_OPTION_REQ_LIST, sizeof(RequiredOptionList),
-			                                    RequiredOptionList);
-
-			/* Send the DHCP DISCOVER packet */
-			uip_udp_send(AppDataSize);
-
-			/* Reset the timeout timer, progress to next state */
-			timer_reset(&AppState->DHCPClient.Timeout);
-			AppState->DHCPClient.CurrentState = DHCP_STATE_WaitForOffer;
-
-			break;
-		case DHCP_STATE_WaitForOffer:
-			if (!(uip_newdata()))
-			{
-				/* Check if the DHCP timeout period has expired while waiting for a response */
-				if (timer_expired(&AppState->DHCPClient.Timeout))
-				  AppState->DHCPClient.CurrentState = DHCP_STATE_SendDiscover;
-
-				break;
-			}
-
-			uint8_t OfferResponse_MessageType;
-			if ((AppData->TransactionID == DHCP_TRANSACTION_ID) &&
-			    DHCPCommon_GetOption(AppData->Options, DHCP_OPTION_MSG_TYPE, &OfferResponse_MessageType) &&
-			    (OfferResponse_MessageType == DHCP_OFFER))
-			{
-				/* Received a DHCP offer for an IP address, copy over values for later request */
-				memcpy(&AppState->DHCPClient.DHCPOffer_Data.AllocatedIP, &AppData->YourIP, sizeof(uip_ipaddr_t));
-				DHCPCommon_GetOption(AppData->Options, DHCP_OPTION_SUBNET_MASK, &AppState->DHCPClient.DHCPOffer_Data.Netmask);
-				DHCPCommon_GetOption(AppData->Options, DHCP_OPTION_ROUTER,      &AppState->DHCPClient.DHCPOffer_Data.GatewayIP);
-				DHCPCommon_GetOption(AppData->Options, DHCP_OPTION_SERVER_ID,   &AppState->DHCPClient.DHCPOffer_Data.ServerIP);
-
-				timer_reset(&AppState->DHCPClient.Timeout);
-				AppState->DHCPClient.CurrentState = DHCP_STATE_SendRequest;
-			}
-
-			break;
-		case DHCP_STATE_SendRequest:
-			/* Fill out the DHCP response header */
-			AppDataSize += DHCPClientApp_FillDHCPHeader(AppData, DHCP_REQUEST, AppState);
-
-			/* Add the DHCP REQUESTED IP ADDRESS option to the packet */
-			AppDataSize += DHCPCommon_SetOption(AppData->Options, DHCP_OPTION_REQ_IPADDR, sizeof(uip_ipaddr_t),
-			                                    &AppState->DHCPClient.DHCPOffer_Data.AllocatedIP);
-
-			/* Add the DHCP SERVER IP ADDRESS option to the packet */
-			AppDataSize += DHCPCommon_SetOption(AppData->Options, DHCP_OPTION_SERVER_ID, sizeof(uip_ipaddr_t),
-			                                    &AppState->DHCPClient.DHCPOffer_Data.ServerIP);
-
-			/* Send the DHCP REQUEST packet */
-			uip_udp_send(AppDataSize);
-
-			/* Reset the timeout timer, progress to next state */
-			timer_reset(&AppState->DHCPClient.Timeout);
-			AppState->DHCPClient.CurrentState = DHCP_STATE_WaitForACK;
-
-			break;
-		case DHCP_STATE_WaitForACK:
-			if (!(uip_newdata()))
-			{
-				/* Check if the DHCP timeout period has expired while waiting for a response */
-				if (timer_expired(&AppState->DHCPClient.Timeout))
-				  AppState->DHCPClient.CurrentState = DHCP_STATE_SendDiscover;
-
-				break;
-			}
-
-			uint8_t RequestResponse_MessageType;
-			if ((AppData->TransactionID == DHCP_TRANSACTION_ID) &&
-			    DHCPCommon_GetOption(AppData->Options, DHCP_OPTION_MSG_TYPE, &RequestResponse_MessageType) &&
-			    (RequestResponse_MessageType == DHCP_ACK))
-			{
-				/* Set the new network parameters from the DHCP server */
-				uip_sethostaddr((uip_ipaddr_t*)&AppState->DHCPClient.DHCPOffer_Data.AllocatedIP);
-				uip_setnetmask((uip_ipaddr_t*)&AppState->DHCPClient.DHCPOffer_Data.Netmask);
-				uip_setdraddr((uip_ipaddr_t*)&AppState->DHCPClient.DHCPOffer_Data.GatewayIP);
-
-				AppState->DHCPClient.CurrentState = DHCP_STATE_AddressLeased;
-			}
-
-			break;
-	}
-}
-
-/** Fills the DHCP packet response with the appropriate BOOTP header for DHCP. This fills out all the required
- *  fields, leaving only the additional DHCP options to be added to the packet before it is sent to the DHCP server.
- *
- *  \param[out] DHCPHeader       Location in the packet buffer where the BOOTP header should be written to
- *  \param[in]  DHCPMessageType  DHCP Message type, such as DHCP_DISCOVER
- *  \param[in]  AppState         Application state of the current UDP connection
- *
- *  \return Size in bytes of the created DHCP packet
- */
-static uint16_t DHCPClientApp_FillDHCPHeader(DHCP_Header_t* const DHCPHeader,
-                                             const uint8_t DHCPMessageType,
-                                             uip_udp_appstate_t* const AppState)
-{
-	/* Erase existing packet data so that we start will all 0x00 DHCP header data */
- 	memset(DHCPHeader, 0, sizeof(DHCP_Header_t));
-
-	/* Fill out the DHCP packet header */
-	DHCPHeader->Operation             = DHCP_OP_BOOTREQUEST;
-	DHCPHeader->HardwareType          = DHCP_HTYPE_ETHERNET;
-	DHCPHeader->HardwareAddressLength = sizeof(MACAddress);
-	DHCPHeader->Hops                  = 0;
-	DHCPHeader->TransactionID         = DHCP_TRANSACTION_ID;
-	DHCPHeader->ElapsedSeconds        = 0;
-	DHCPHeader->Flags                 = HTONS(BOOTP_BROADCAST);
-	memcpy(&DHCPHeader->ClientIP,     &uip_hostaddr,        sizeof(uip_ipaddr_t));
-	memcpy(&DHCPHeader->YourIP,       &AppState->DHCPClient.DHCPOffer_Data.AllocatedIP, sizeof(uip_ipaddr_t));
-	memcpy(&DHCPHeader->NextServerIP, &AppState->DHCPClient.DHCPOffer_Data.ServerIP,    sizeof(uip_ipaddr_t));
-	memcpy(&DHCPHeader->ClientHardwareAddress, &MACAddress, sizeof(struct uip_eth_addr));
-	DHCPHeader->Cookie                = DHCP_MAGIC_COOKIE;
-
-	/* Add a DHCP message type and terminator options to the start of the DHCP options field */
-	DHCPHeader->Options[0]            = DHCP_OPTION_MSG_TYPE;
-	DHCPHeader->Options[1]            = 1;
-	DHCPHeader->Options[2]            = DHCPMessageType;
-	DHCPHeader->Options[3]            = DHCP_OPTION_END;
-
-	/* Calculate the total number of bytes added to the outgoing packet */
-	return (sizeof(DHCP_Header_t) + 4);
-}
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPClientApp.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPClientApp.h
deleted file mode 100644
index 298ff7354a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPClientApp.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DHCPClientApp.c.
- */
-
-#ifndef _DHCPCLIENT_APP_H_
-#define _DHCPCLIENT_APP_H_
-
-	/* Includes: */
-		#include <stdio.h>
-
-		#include <uip.h>
-
-		#include "Config/AppConfig.h"
-		#include "../Webserver.h"
-		#include "DHCPCommon.h"
-
-	/* Enums: */
-		/** States for each DHCP connection to a DHCP client. */
-		enum DHCP_Client_States_t
-		{
-			DHCP_STATE_SendDiscover,  /**< Send DISCOVER packet to retrieve DHCP lease offers */
-			DHCP_STATE_WaitForOffer,  /**< Waiting for OFFER packet giving available DHCP leases */
-			DHCP_STATE_SendRequest,   /**< Send REQUEST packet to request a DHCP lease */
-			DHCP_STATE_WaitForACK,    /**< Wait for ACK packet to complete the DHCP lease */
-			DHCP_STATE_AddressLeased, /**< DHCP address has been leased from a DHCP server */
-		};
-
-	/* Function Prototypes: */
-		void DHCPClientApp_Init(void);
-		void DHCPClientApp_Callback(void);
-
-		#if defined(INCLUDE_FROM_DHCPCLIENTAPP_C)
-			static uint16_t DHCPClientApp_FillDHCPHeader(DHCP_Header_t* const DHCPHeader,
-			                                             const uint8_t DHCPMessageType,
-			                                             uip_udp_appstate_t* const AppState);
-		#endif
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPCommon.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPCommon.c
deleted file mode 100644
index 7dbcaf0691..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPCommon.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Common DHCP routines to manage DHCP packet data.
- */
-
-#include "DHCPCommon.h"
-
-#if defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__)
-
-/** Sets the given DHCP option in the DHCP packet's option list. This automatically moves the
- *  end of options terminator past the new option in the options list.
- *
- *  \param[in,out] DHCPOptionList  Pointer to the start of the DHCP packet's options list
- *  \param[in]     Option          DHCP option to add to the list
- *  \param[in]     DataLen         Size in bytes of the option data to add
- *  \param[in]     OptionData      Buffer where the option's data is to be sourced from
- *
- *  \return Number of bytes added to the DHCP packet
- */
-uint8_t DHCPCommon_SetOption(uint8_t* DHCPOptionList,
-                             const uint8_t Option,
-                             const uint8_t DataLen,
-                             void* const OptionData)
-{
-	/* Skip through the DHCP options list until the terminator option is found */
-	while (*DHCPOptionList != DHCP_OPTION_END)
-	  DHCPOptionList += (DHCPOptionList[1] + 2);
-
-	/* Overwrite the existing terminator with the new option, add a new terminator at the end of the list */
-	DHCPOptionList[0] = Option;
-	DHCPOptionList[1] = DataLen;
-	memcpy(&DHCPOptionList[2], OptionData, DataLen);
-	DHCPOptionList[2 + DataLen] = DHCP_OPTION_END;
-
-	/* Calculate the total number of bytes added to the outgoing packet */
-	return (2 + DataLen);
-}
-
-/** Retrieves the given option's data (if present) from the DHCP packet's options list.
- *
- *  \param[in,out] DHCPOptionList  Pointer to the start of the DHCP packet's options list
- *  \param[in]     Option          DHCP option to retrieve to the list
- *  \param[out]    Destination     Buffer where the option's data is to be written to if found
- *
- *  \return Boolean \c true if the option was found in the DHCP packet's options list, \c false otherwise
- */
-bool DHCPCommon_GetOption(const uint8_t* DHCPOptionList,
-                          const uint8_t Option,
-                          void* const Destination)
-{
-	/* Look through the incoming DHCP packet's options list for the requested option */
-	while (*DHCPOptionList != DHCP_OPTION_END)
-	{
-		/* Check if the current DHCP option in the packet is the one requested */
-		if (DHCPOptionList[0] == Option)
-		{
-			/* Copy request option's data to the destination buffer */
-			memcpy(Destination, &DHCPOptionList[2], DHCPOptionList[1]);
-
-			/* Indicate that the requested option data was successfully retrieved */
-			return true;
-		}
-
-		/* Skip to next DHCP option in the options list */
-		DHCPOptionList += (DHCPOptionList[1] + 2);
-	}
-
-	/* Requested option not found in the incoming packet's DHCP options list */
-	return false;
-}
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPCommon.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPCommon.h
deleted file mode 100644
index 1ded5420aa..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPCommon.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for common DHCP defines.
- */
-
-#ifndef _DHCP_COMMON_H_
-#define _DHCP_COMMON_H_
-
-	/* Includes: */
-		#include <stdint.h>
-		#include <stdbool.h>
-		#include <string.h>
-
-		#include "Config/AppConfig.h"
-
-		#include <uip.h>
-
-	/* Macros: */
-		/** UDP listen port for a BOOTP server. */
-		#define DHCP_SERVER_PORT          67
-
-		/** UDP listen port for a BOOTP client. */
-		#define DHCP_CLIENT_PORT          68
-
-		/** BOOTP message type for a BOOTP REQUEST message. */
-		#define DHCP_OP_BOOTREQUEST       0x01
-
-		/** BOOTP message type for a BOOTP REPLY message. */
-		#define DHCP_OP_BOOTREPLY         0x02
-
-		/** BOOTP flag for a BOOTP broadcast message. */
-		#define BOOTP_BROADCAST           0x8000
-
-		/** Magic DHCP cookie for a BOOTP message to identify it as a DHCP message. */
-		#define DHCP_MAGIC_COOKIE         0x63538263
-
-		/** Unique transaction ID used to identify DHCP responses to the client. */
-		#define DHCP_TRANSACTION_ID       0x13245466
-
-		/** DHCP message type for a DISCOVER message. */
-		#define DHCP_DISCOVER             1
-
-		/** DHCP message type for an OFFER message. */
-		#define DHCP_OFFER                2
-
-		/** DHCP message type for a REQUEST message. */
-		#define DHCP_REQUEST              3
-
-		/** DHCP message type for a DECLINE message. */
-		#define DHCP_DECLINE              4
-
-		/** DHCP message type for an ACK message. */
-		#define DHCP_ACK                  5
-
-		/** DHCP message type for a NAK message. */
-		#define DHCP_NAK                  6
-
-		/** DHCP message type for a RELEASE message. */
-		#define DHCP_RELEASE              7
-
-		/** DHCP medium type for standard Ethernet. */
-		#define DHCP_HTYPE_ETHERNET       1
-
-		/** DHCP message option for the network subnet mask. */
-		#define DHCP_OPTION_SUBNET_MASK   1
-
-		/** DHCP message option for the network gateway IP. */
-		#define DHCP_OPTION_ROUTER        3
-
-		/** DHCP message option for the network DNS server. */
-		#define DHCP_OPTION_DNS_SERVER    6
-
-		/** DHCP message option for the requested client IP address. */
-		#define DHCP_OPTION_REQ_IPADDR    50
-
-		/** DHCP message option for the IP address lease time. */
-		#define DHCP_OPTION_LEASE_TIME    51
-
-		/** DHCP message option for the DHCP message type. */
-		#define DHCP_OPTION_MSG_TYPE      53
-
-		/** DHCP message option for the DHCP server IP. */
-		#define DHCP_OPTION_SERVER_ID     54
-
-		/** DHCP message option for the list of required options from the server. */
-		#define DHCP_OPTION_REQ_LIST      55
-
-		/** DHCP message option for the options list terminator. */
-		#define DHCP_OPTION_END           255
-
-	/* Type Defines: */
-		/** Type define for a DHCP packet inside an Ethernet frame. */
-		typedef struct
-		{
-			uint8_t      Operation; /**< DHCP operation, either DHCP_OP_BOOTREQUEST or DHCP_OP_BOOTREPLY */
-			uint8_t      HardwareType; /**< Hardware carrier type constant */
-			uint8_t      HardwareAddressLength;  /**< Length in bytes of a hardware (MAC) address on the network */
-			uint8_t      Hops; /**< Number of hops required to reach the server, unused */
-
-			uint32_t     TransactionID; /**< Unique ID of the DHCP packet, for positive matching between sent and received packets */
-
-			uint16_t     ElapsedSeconds; /**< Elapsed seconds since the request was made */
-			uint16_t     Flags; /**< BOOTP packet flags */
-
-			uip_ipaddr_t ClientIP; /**< Client IP address, if already leased an IP */
-			uip_ipaddr_t YourIP; /**< Client IP address */
-			uip_ipaddr_t NextServerIP; /**< Legacy BOOTP protocol field, unused for DHCP */
-			uip_ipaddr_t RelayAgentIP; /**< Legacy BOOTP protocol field, unused for DHCP */
-
-			uint8_t      ClientHardwareAddress[16]; /**< Hardware (MAC) address of the client making a request to the DHCP server */
-			uint8_t      ServerHostnameString[64]; /**< Legacy BOOTP protocol field, unused for DHCP */
-			uint8_t      BootFileName[128]; /**< Legacy BOOTP protocol field, unused for DHCP */
-
-			uint32_t     Cookie; /**< Magic BOOTP protocol cookie to indicate a valid packet */
-
-			uint8_t      Options[]; /**< DHCP message options */
-		} DHCP_Header_t;
-
-	/* Function Prototypes: */
-		uint8_t  DHCPCommon_SetOption(uint8_t* DHCPOptionList,
-			                          const uint8_t Option,
-			                          const uint8_t DataLen,
-			                          void* const OptionData);
-		bool     DHCPCommon_GetOption(const uint8_t* DHCPOptionList,
-			                          const uint8_t Option,
-			                          void* const Destination);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPServerApp.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPServerApp.c
deleted file mode 100644
index 9ed521e575..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPServerApp.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  DHCP Server Application. When connected to the uIP stack, this will send IP configuration settings to a
- *  DHCP client on the network.
- */
-
-#define  INCLUDE_FROM_DHCPSERVERAPP_C
-#include "DHCPServerApp.h"
-
-#if defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__)
-
-struct uip_conn* BroadcastConnection;
-
-uint8_t LeasedIPs[255 / 8];
-
-/** Initialization function for the DHCP server. */
-void DHCPServerApp_Init(void)
-{
-	/* Listen on port 67 for DHCP server connections from hosts */
-	uip_listen(HTONS(DHCP_SERVER_PORT));
-
-	/* Create a new UDP connection to the DHCP server port for the DHCP solicitation */
-	struct uip_udp_conn* BroadcastConnection = uip_udp_new(&uip_broadcast_addr, HTONS(DHCP_CLIENT_PORT));
-
-	/* If the connection was successfully created, bind it to the local DHCP client port */
-	if (BroadcastConnection != NULL)
-	  uip_udp_bind(BroadcastConnection, HTONS(DHCP_SERVER_PORT));
-
-	/* Set all IP addresses as unleased */
-	memset(LeasedIPs, 0x00, sizeof(LeasedIPs));
-}
-
-/** uIP stack application callback for the DHCP server. This function must be called each time the TCP/IP stack
- *  needs a UDP packet to be processed.
- */
-void DHCPServerApp_Callback(void)
-{
-	DHCP_Header_t* const AppData     = (DHCP_Header_t*)uip_appdata;
-	uint16_t             AppDataSize = 0;
-
-	/* Only process when new data arrives - don't retransmit lost packets */
-	if (uip_newdata())
-	{
-		/* Get the DHCP message type (if present), otherwise early-abort */
-		uint8_t DHCPMessageType;
-		if (!(DHCPCommon_GetOption(AppData->Options, DHCP_OPTION_MSG_TYPE, &DHCPMessageType)))
-			return;
-
-		uip_ipaddr_t        Netmask, GatewayIPAddress, PreferredClientIP;
-		struct uip_eth_addr RemoteMACAddress;
-		uint32_t            TransactionID;
-
-		/* Get configured network mask, gateway IP and extract out DHCP transaction ID and remote IP */
-		uip_getnetmask(&Netmask);
-		uip_getdraddr(&GatewayIPAddress);
-		memcpy(&RemoteMACAddress, &AppData->ClientHardwareAddress, sizeof(struct uip_eth_addr));
-		TransactionID = AppData->TransactionID;
-
-		/* Try to extract out the client's preferred IP address if it is indicated in the packet */
-		if (!(DHCPCommon_GetOption(AppData->Options, DHCP_OPTION_REQ_IPADDR, &PreferredClientIP)))
-		  memcpy(&PreferredClientIP, &uip_all_zeroes_addr, sizeof(uip_ipaddr_t));
-
-		switch (DHCPMessageType)
-		{
-			case DHCP_DISCOVER:
-				/* If no preference was made or the preferred IP is already taken, find a new address */
-				if (DHCPServerApp_CheckIfIPLeased(&PreferredClientIP))
-				  DHCPServerApp_GetUnleasedIP(&PreferredClientIP);
-
-				/* Create a new DHCP OFFER packet with the offered IP address */
-				AppDataSize += DHCPServerApp_FillDHCPHeader(AppData, DHCP_OFFER, &RemoteMACAddress, &PreferredClientIP, TransactionID);
-
-				/* Add network mask and router information to the list of DHCP OFFER packet options */
-				AppDataSize += DHCPCommon_SetOption(AppData->Options, DHCP_OPTION_SUBNET_MASK,
-													sizeof(uip_ipaddr_t), &Netmask);
-				AppDataSize += DHCPCommon_SetOption(AppData->Options, DHCP_OPTION_ROUTER,
-					                                sizeof(uip_ipaddr_t), &GatewayIPAddress);
-
-				/* Send the DHCP OFFER packet */
-				uip_poll_conn(BroadcastConnection);
-				memcpy(&uip_udp_conn->ripaddr, &uip_broadcast_addr, sizeof(uip_ipaddr_t));
-				uip_udp_send(AppDataSize);
-
-				break;
-			case DHCP_REQUEST:
-				/* Check to see if the requested IP address has already been leased to a client */
-				if (!(DHCPServerApp_CheckIfIPLeased(&PreferredClientIP)))
-				{
-					/* Create a new DHCP ACK packet to accept the IP address lease */
-					AppDataSize += DHCPServerApp_FillDHCPHeader(AppData, DHCP_ACK, &RemoteMACAddress, &PreferredClientIP, TransactionID);
-
-					/* Add network mask and router information to the list of DHCP ACK packet options */
-					AppDataSize += DHCPCommon_SetOption(AppData->Options, DHCP_OPTION_SUBNET_MASK,
-														sizeof(uip_ipaddr_t), &Netmask);
-					AppDataSize += DHCPCommon_SetOption(AppData->Options, DHCP_OPTION_ROUTER,
-					                                    sizeof(uip_ipaddr_t), &GatewayIPAddress);
-
-					/* Mark the requested IP as leased to a client */
-					DHCPServerApp_LeaseIP(&PreferredClientIP);
-				}
-				else
-				{
-					/* Create a new DHCP NAK packet to reject the requested allocation */
-					AppDataSize += DHCPServerApp_FillDHCPHeader(AppData, DHCP_NAK, &RemoteMACAddress, &uip_all_zeroes_addr, TransactionID);
-				}
-
-				/* Send the DHCP ACK or NAK packet */
-				uip_poll_conn(BroadcastConnection);
-				memcpy(&uip_udp_conn->ripaddr, &uip_broadcast_addr, sizeof(uip_ipaddr_t));
-				uip_udp_send(AppDataSize);
-
-				break;
-			case DHCP_RELEASE:
-				/* Mark the IP address as released in the allocation table */
-				DHCPServerApp_UnleaseIP(&uip_udp_conn->ripaddr);
-				break;
-		}
-	}
-}
-
-/** Fills the DHCP packet response with the appropriate BOOTP header for DHCP. This fills out all the required
- *  fields, leaving only the additional DHCP options to be added to the packet before it is sent to the DHCP client.
- *
- *  \param[out] DHCPHeader             Location in the packet buffer where the BOOTP header should be written to
- *  \param[in]  DHCPMessageType        DHCP Message type, such as DHCP_DISCOVER
- *  \param[in]  ClientHardwareAddress  Client MAC address the created transaction should be directed to
- *  \param[in]  PreferredClientIP      Preferred IP that should be given to the client if it is unallocated
- *  \param[in]  TransactionID          Transaction ID the created transaction should be associated with
- *
- *  \return Size in bytes of the created DHCP packet
- */
-static uint16_t DHCPServerApp_FillDHCPHeader(DHCP_Header_t* const DHCPHeader,
-                                             const uint8_t DHCPMessageType,
-                                             const struct uip_eth_addr* const ClientHardwareAddress,
-											 const uip_ipaddr_t* const PreferredClientIP,
-                                             const uint32_t TransactionID)
-{
-	/* Erase existing packet data so that we start will all 0x00 DHCP header data */
- 	memset(DHCPHeader, 0, sizeof(DHCP_Header_t));
-
-	DHCPHeader->Operation             = DHCPMessageType;
-	DHCPHeader->HardwareType          = DHCP_HTYPE_ETHERNET;
-	DHCPHeader->HardwareAddressLength = sizeof(MACAddress);
-	DHCPHeader->Hops                  = 0;
-	DHCPHeader->TransactionID         = TransactionID;
-	DHCPHeader->ElapsedSeconds        = 0;
-	DHCPHeader->Flags                 = 0;
-	memcpy(&DHCPHeader->NextServerIP, &uip_hostaddr, sizeof(uip_ipaddr_t));
-	memcpy(&DHCPHeader->YourIP, PreferredClientIP, sizeof(uip_ipaddr_t));
-	memcpy(&DHCPHeader->ClientHardwareAddress, ClientHardwareAddress, sizeof(struct uip_eth_addr));
-	DHCPHeader->Cookie                = DHCP_MAGIC_COOKIE;
-
-	/* Add a DHCP message type and terminator options to the start of the DHCP options field */
-	DHCPHeader->Options[0]            = DHCP_OPTION_MSG_TYPE;
-	DHCPHeader->Options[1]            = 1;
-	DHCPHeader->Options[2]            = DHCPMessageType;
-	DHCPHeader->Options[3]            = DHCP_OPTION_END;
-
-	/* Calculate the total number of bytes added to the outgoing packet */
-	return (sizeof(DHCP_Header_t) + 4);
-}
-
-/** Checks to see if the nominated IP address has already been allocated to a client.
- *
- *  \param[in] IPAddress  IP Address whose lease status should be checked
- *
- *  \pre The IP address must be within the same /24 subnet as the virtual webserver.
- *
- *  \return Boolean \c true if the IP has already been leased to a client, \c false otherwise.
- */
-static bool DHCPServerApp_CheckIfIPLeased(const uip_ipaddr_t* const IPAddress)
-{
-	uint8_t Byte = (IPAddress->u8[3] / 8);
-	uint8_t Mask = (1 << (IPAddress->u8[3] % 8));
-
-	/* Make sure that the requested IP address isn't already leased to the virtual server or another client */
-	if (IPAddress->u8[3] && !(IPAddress->u8[3] == uip_hostaddr.u8[3]) && !(LeasedIPs[Byte] & Mask))
-	  return false;
-	else
-	  return true;
-}
-
-/** Retrieves the next unleased IP in the IP address pool.
- *
- *  \param[out] NewIPAddress  Location where the generated IP Address should be stored
- */
-static void DHCPServerApp_GetUnleasedIP(uip_ipaddr_t* const NewIPAddress)
-{
-	uip_ipaddr_copy(NewIPAddress, &uip_hostaddr);
-
-	/** Look through the current subnet, skipping the broadcast and zero IP addresses */
-	for (uint8_t IP = 1; IP < 254; IP++)
-	{
-		/* Update new IP address to lease with the current IP address to test */
-		NewIPAddress->u8[3] = IP;
-
-		/* If we've found an unleased IP, abort with the updated IP stored for the called */
-		if (!(DHCPServerApp_CheckIfIPLeased(NewIPAddress)))
-		  return;
-	}
-}
-
-/** Marks the given IP Address as leased in the address pool, so that it will not be
- *  allocated to another client unless it is first released.
- *
- *  \param[in] IPAddress  IP Address to mark as leased
- *
- *  \pre The IP address must be within the same /24 subnet as the virtual webserver.
- */
-static void DHCPServerApp_LeaseIP(const uip_ipaddr_t* const IPAddress)
-{
-	uint8_t Byte = (IPAddress->u8[3] / 8);
-	uint8_t Mask = (1 << (IPAddress->u8[3] % 8));
-
-	/* Mark the IP address as leased in the allocation table */
-	LeasedIPs[Byte] |= Mask;
-}
-
-/** Marks the given IP Address as not leased in the address pool, so that it can be
- *  allocated to another client upon request.
- *
- *  \param[in] IPAddress  IP Address to mark as not leased
- *
- *  \pre The IP address must be within the same /24 subnet as the virtual webserver.
- */
-static void DHCPServerApp_UnleaseIP(const uip_ipaddr_t* const IPAddress)
-{
-	uint8_t Byte = (IPAddress->u8[3] / 8);
-	uint8_t Mask = (1 << (IPAddress->u8[3] % 8));
-
-	/* Mark the IP address as unleased in the allocation table */
-	LeasedIPs[Byte] &= ~Mask;
-}
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPServerApp.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPServerApp.h
deleted file mode 100644
index c8195a64cb..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DHCPServerApp.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DHCPServerApp.c.
- */
-
-#ifndef _DHCPSERVER_APP_H_
-#define _DHCPSERVER_APP_H_
-
-	/* Includes: */
-		#include <stdio.h>
-
-		#include <uip.h>
-
-		#include "Config/AppConfig.h"
-		#include "../Webserver.h"
-		#include "DHCPCommon.h"
-
-	/* Function Prototypes: */
-		void DHCPServerApp_Init(void);
-		void DHCPServerApp_Callback(void);
-
-		#if defined(INCLUDE_FROM_DHCPSERVERAPP_C)
-		static uint16_t DHCPServerApp_FillDHCPHeader(DHCP_Header_t* const DHCPHeader,
-		                                             const uint8_t DHCPMessageType,
-		                                             const struct uip_eth_addr* const ClientHardwareAddress,
-		                                             const uip_ipaddr_t* const PreferredClientIP,
-		                                             const uint32_t TransactionID);
-		static bool DHCPServerApp_CheckIfIPLeased(const uip_ipaddr_t* const IPAddress);
-		static void DHCPServerApp_GetUnleasedIP(uip_ipaddr_t* const NewIPAddress);
-		static void DHCPServerApp_LeaseIP(const uip_ipaddr_t* const IPAddress);
-		static void DHCPServerApp_UnleaseIP(const uip_ipaddr_t* const IPAddress);
-		#endif
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DataflashManager.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DataflashManager.c
deleted file mode 100644
index d8dc54dad7..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DataflashManager.c
+++ /dev/null
@@ -1,534 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Functions to manage the physical Dataflash media, including reading and writing of
- *  blocks of data. These functions are called by the SCSI layer when data must be stored
- *  or retrieved to/from the physical storage media. If a different media is used (such
- *  as a SD card or EEPROM), functions similar to these will need to be generated.
- */
-
-#define  INCLUDE_FROM_DATAFLASHMANAGER_C
-#include "DataflashManager.h"
-
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
- *  the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes
- *  them to the Dataflash in Dataflash page sized blocks.
- *
- *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
- *  \param[in] BlockAddress  Data block starting address for the write sequence
- *  \param[in] TotalBlocks   Number of blocks of data to write
- */
-void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                  const uint32_t BlockAddress,
-                                  uint16_t TotalBlocks)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-	bool     UsingSecondBuffer   = false;
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the Dataflash buffer */
-	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
-	Dataflash_SendAddressBytes(CurrDFPage, 0);
-	Dataflash_WaitWhileBusy();
-#endif
-
-	/* Send the Dataflash buffer write command */
-	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
-	Dataflash_SendAddressBytes(0, CurrDFPageByte);
-
-	/* Wait until endpoint is ready before continuing */
-	if (Endpoint_WaitUntilReady())
-	  return;
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if the endpoint is currently empty */
-			if (!(Endpoint_IsReadWriteAllowed()))
-			{
-				/* Clear the current endpoint bank */
-				Endpoint_ClearOUT();
-
-				/* Wait until the host has sent another packet */
-				if (Endpoint_WaitUntilReady())
-				  return;
-			}
-
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Write the Dataflash buffer contents back to the Dataflash page */
-				Dataflash_WaitWhileBusy();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
-				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
-				  UsingSecondBuffer = !(UsingSecondBuffer);
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
-				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
-				{
-					/* Copy selected dataflash's current page contents to the Dataflash buffer */
-					Dataflash_WaitWhileBusy();
-					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
-					Dataflash_SendAddressBytes(CurrDFPage, 0);
-					Dataflash_WaitWhileBusy();
-				}
-#endif
-
-				/* Send the Dataflash buffer write command */
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
-				Dataflash_SendAddressBytes(0, 0);
-			}
-
-			/* Write one 16-byte chunk of data to the Dataflash */
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-			Dataflash_SendByte(Endpoint_Read_8());
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-
-			/* Check if the current command is being aborted by the host */
-			if (MSInterfaceInfo->State.IsMassStoreReset)
-			  return;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Write the Dataflash buffer contents back to the Dataflash page */
-	Dataflash_WaitWhileBusy();
-	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
-	Dataflash_WaitWhileBusy();
-
-	/* If the endpoint is empty, clear it ready for the next packet from the host */
-	if (!(Endpoint_IsReadWriteAllowed()))
-	  Endpoint_ClearOUT();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
- *  the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash
- *  and writes them in OS sized blocks to the endpoint.
- *
- *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
- *  \param[in] BlockAddress  Data block starting address for the read sequence
- *  \param[in] TotalBlocks   Number of blocks of data to read
- */
-void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                 const uint32_t BlockAddress,
-                                 uint16_t TotalBlocks)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-	/* Send the Dataflash main memory page read command */
-	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-
-	/* Wait until endpoint is ready before continuing */
-	if (Endpoint_WaitUntilReady())
-	  return;
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if the endpoint is currently full */
-			if (!(Endpoint_IsReadWriteAllowed()))
-			{
-				/* Clear the endpoint bank to send its contents to the host */
-				Endpoint_ClearIN();
-
-				/* Wait until the endpoint is ready for more data */
-				if (Endpoint_WaitUntilReady())
-				  return;
-			}
-
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-				/* Send the Dataflash main memory page read command */
-				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-			}
-
-			/* Read one 16-byte chunk of data from the Dataflash */
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-			Endpoint_Write_8(Dataflash_ReceiveByte());
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-
-			/* Check if the current command is being aborted by the host */
-			if (MSInterfaceInfo->State.IsMassStoreReset)
-			  return;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* If the endpoint is full, send its contents to the host */
-	if (!(Endpoint_IsReadWriteAllowed()))
-	  Endpoint_ClearIN();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
- *  the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the
- *  Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
- *  Dataflash.
- *
- *  \param[in] BlockAddress  Data block starting address for the write sequence
- *  \param[in] TotalBlocks   Number of blocks of data to write
- *  \param[in] BufferPtr     Pointer to the data source RAM buffer
- */
-void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
-                                      uint16_t TotalBlocks,
-                                      const uint8_t* BufferPtr)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-	bool     UsingSecondBuffer   = false;
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the Dataflash buffer */
-	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
-	Dataflash_SendAddressBytes(CurrDFPage, 0);
-	Dataflash_WaitWhileBusy();
-#endif
-
-	/* Send the Dataflash buffer write command */
-	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
-	Dataflash_SendAddressBytes(0, CurrDFPageByte);
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Write the Dataflash buffer contents back to the Dataflash page */
-				Dataflash_WaitWhileBusy();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
-				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
-				  UsingSecondBuffer = !(UsingSecondBuffer);
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
-				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
-				{
-					/* Copy selected dataflash's current page contents to the Dataflash buffer */
-					Dataflash_WaitWhileBusy();
-					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
-					Dataflash_SendAddressBytes(CurrDFPage, 0);
-					Dataflash_WaitWhileBusy();
-				}
-#endif
-
-				/* Send the Dataflash buffer write command */
-				Dataflash_ToggleSelectedChipCS();
-				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
-				Dataflash_SendAddressBytes(0, 0);
-			}
-
-			/* Write one 16-byte chunk of data to the Dataflash */
-			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
-			  Dataflash_SendByte(*(BufferPtr++));
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Write the Dataflash buffer contents back to the Dataflash page */
-	Dataflash_WaitWhileBusy();
-	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
-	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
-	Dataflash_WaitWhileBusy();
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
- *  the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash
- *  and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read
- *  the files stored on the Dataflash.
- *
- *  \param[in] BlockAddress  Data block starting address for the read sequence
- *  \param[in] TotalBlocks   Number of blocks of data to read
- *  \param[out] BufferPtr    Pointer to the data destination RAM buffer
- */
-void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
-                                     uint16_t TotalBlocks,
-                                     uint8_t* BufferPtr)
-{
-	uint16_t CurrDFPage          = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE);
-	uint16_t CurrDFPageByte      = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE);
-	uint8_t  CurrDFPageByteDiv16 = (CurrDFPageByte >> 4);
-
-	/* Select the correct starting Dataflash IC for the block requested */
-	Dataflash_SelectChipFromPage(CurrDFPage);
-
-	/* Send the Dataflash main memory page read command */
-	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-	Dataflash_SendByte(0x00);
-
-	while (TotalBlocks)
-	{
-		uint8_t BytesInBlockDiv16 = 0;
-
-		/* Write an endpoint packet sized data block to the Dataflash */
-		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
-		{
-			/* Check if end of Dataflash page reached */
-			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
-			{
-				/* Reset the Dataflash buffer counter, increment the page counter */
-				CurrDFPageByteDiv16 = 0;
-				CurrDFPage++;
-
-				/* Select the next Dataflash chip based on the new Dataflash page index */
-				Dataflash_SelectChipFromPage(CurrDFPage);
-
-				/* Send the Dataflash main memory page read command */
-				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
-				Dataflash_SendAddressBytes(CurrDFPage, 0);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-				Dataflash_SendByte(0x00);
-			}
-
-			/* Read one 16-byte chunk of data from the Dataflash */
-			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
-			  *(BufferPtr++) = Dataflash_ReceiveByte();
-
-			/* Increment the Dataflash page 16 byte block counter */
-			CurrDFPageByteDiv16++;
-
-			/* Increment the block 16 byte block counter */
-			BytesInBlockDiv16++;
-		}
-
-		/* Decrement the blocks remaining counter */
-		TotalBlocks--;
-	}
-
-	/* Deselect all Dataflash chips */
-	Dataflash_DeselectChip();
-}
-
-/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
-void DataflashManager_ResetDataflashProtections(void)
-{
-	/* Select first Dataflash chip, send the read status register command */
-	Dataflash_SelectChip(DATAFLASH_CHIP1);
-	Dataflash_SendByte(DF_CMD_GETSTATUS);
-
-	/* Check if sector protection is enabled */
-	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
-	{
-		Dataflash_ToggleSelectedChipCS();
-
-		/* Send the commands to disable sector protection */
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
-	}
-
-	/* Select second Dataflash chip (if present on selected board), send read status register command */
-	#if (DATAFLASH_TOTALCHIPS == 2)
-	Dataflash_SelectChip(DATAFLASH_CHIP2);
-	Dataflash_SendByte(DF_CMD_GETSTATUS);
-
-	/* Check if sector protection is enabled */
-	if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON)
-	{
-		Dataflash_ToggleSelectedChipCS();
-
-		/* Send the commands to disable sector protection */
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]);
-		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
-	}
-	#endif
-
-	/* Deselect current Dataflash chip */
-	Dataflash_DeselectChip();
-}
-
-/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working.
- *
- *  \return Boolean \c true if all media chips are working, \c false otherwise
- */
-bool DataflashManager_CheckDataflashOperation(void)
-{
-	uint8_t ReturnByte;
-
-	/* Test first Dataflash IC is present and responding to commands */
-	Dataflash_SelectChip(DATAFLASH_CHIP1);
-	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
-	ReturnByte = Dataflash_ReceiveByte();
-	Dataflash_DeselectChip();
-
-	/* If returned data is invalid, fail the command */
-	if (ReturnByte != DF_MANUFACTURER_ATMEL)
-	  return false;
-
-	#if (DATAFLASH_TOTALCHIPS == 2)
-	/* Test second Dataflash IC is present and responding to commands */
-	Dataflash_SelectChip(DATAFLASH_CHIP2);
-	Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO);
-	ReturnByte = Dataflash_ReceiveByte();
-	Dataflash_DeselectChip();
-
-	/* If returned data is invalid, fail the command */
-	if (ReturnByte != DF_MANUFACTURER_ATMEL)
-	  return false;
-	#endif
-
-	return true;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DataflashManager.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DataflashManager.h
deleted file mode 100644
index da34b39268..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/DataflashManager.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for DataflashManager.c.
- */
-
-#ifndef _DATAFLASH_MANAGER_H_
-#define _DATAFLASH_MANAGER_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-
-		#include "../Descriptors.h"
-
-		#include <LUFA/Common/Common.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Drivers/Board/Dataflash.h>
-
-	/* Preprocessor Checks: */
-		#if (DATAFLASH_PAGE_SIZE % 16)
-			#error Dataflash page size must be a multiple of 16 bytes.
-		#endif
-
-	/* Defines: */
-		/** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */
-		#define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
-
-		/** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
-		 *  storage media (Dataflash) using a different native block size. Do not change this value.
-		 */
-		#define VIRTUAL_MEMORY_BLOCK_SIZE           512
-
-		/** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not
-		 *  change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size.
-		 */
-		#define VIRTUAL_MEMORY_BLOCKS               (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE)
-
-		/** Indicates if the disk is write protected or not. */
-		#define DISK_READ_ONLY                      false
-
-	/* Function Prototypes: */
-		void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-		                                  const uint32_t BlockAddress,
-		                                  uint16_t TotalBlocks);
-		void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-		                                 const uint32_t BlockAddress,
-		                                 uint16_t TotalBlocks);
-		void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
-		                                      uint16_t TotalBlocks,
-		                                      const uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
-		void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
-		                                     uint16_t TotalBlocks,
-		                                     uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3);
-		void DataflashManager_ResetDataflashProtections(void);
-		bool DataflashManager_CheckDataflashOperation(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/00readme.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/00readme.txt
deleted file mode 100644
index 80d8843d13..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/00readme.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-FatFs Module Source Files R0.09a                       (C)ChaN, 2012
-
-
-FILES
-
-  ffconf.h   Configuration file for FatFs module.
-  ff.h       Common include file for FatFs and application module.
-  ff.c       FatFs module.
-  diskio.h   Common include file for FatFs and disk I/O module.
-  diskio.c   An example of glue function to attach existing disk I/O module to FatFs.
-  integer.h  Integer type definitions for FatFs.
-  option     Optional external functions.
-
-  Low level disk I/O module is not included in this archive because the FatFs
-  module is only a generic file system layer and not depend on any specific
-  storage device. You have to provide a low level disk I/O module that written
-  to control your storage device.
-
-
-
-AGREEMENTS
-
- FatFs module is an open source software to implement FAT file system to
- small embedded systems. This is a free software and is opened for education,
- research and commercial developments under license policy of following trems.
-
-  Copyright (C) 2012, ChaN, all right reserved.
-
- * The FatFs module is a free software and there is NO WARRANTY.
- * No restriction on use. You can use, modify and redistribute it for
-   personal, non-profit or commercial product UNDER YOUR RESPONSIBILITY.
- * Redistributions of source code must retain the above copyright notice.
-
-
-
-REVISION HISTORY
-
-  Feb 26, 2006  R0.00  Prototype
-
-  Apr 29, 2006  R0.01  First release.
-
-  Jun 01, 2006  R0.02  Added FAT12.
-                       Removed unbuffered mode.
-                       Fixed a problem on small (<32M) patition.
-
-  Jun 10, 2006  R0.02a Added a configuration option _FS_MINIMUM.
-
-  Sep 22, 2006  R0.03  Added f_rename.
-                       Changed option _FS_MINIMUM to _FS_MINIMIZE.
-
-  Dec 11, 2006  R0.03a Improved cluster scan algolithm to write files fast.
-                       Fixed f_mkdir creates incorrect directory on FAT32.
-
-  Feb 04, 2007  R0.04  Supported multiple drive system. (FatFs)
-                       Changed some APIs for multiple drive system.
-                       Added f_mkfs. (FatFs)
-                       Added _USE_FAT32 option. (Tiny-FatFs)
-
-  Apr 01, 2007  R0.04a Supported multiple partitions on a plysical drive. (FatFs)
-                       Fixed an endian sensitive code in f_mkfs. (FatFs)
-                       Added a capability of extending the file size to f_lseek.
-                       Added minimization level 3.
-                       Fixed a problem that can collapse a sector when recreate an
-                       existing file in any sub-directory at non FAT32 cfg. (Tiny-FatFs)
-
-  May 05, 2007  R0.04b Added _USE_NTFLAG option.
-                       Added FSInfo support.
-                       Fixed some problems corresponds to FAT32. (Tiny-FatFs)
-                       Fixed DBCS name can result FR_INVALID_NAME.
-                       Fixed short seek (0 < ofs <= csize) collapses the file object.
-
-  Aug 25, 2007  R0.05  Changed arguments of f_read, f_write.
-                       Changed arguments of f_mkfs. (FatFs)
-                       Fixed f_mkfs on FAT32 creates incorrect FSInfo. (FatFs)
-                       Fixed f_mkdir on FAT32 creates incorrect directory. (FatFs)
-
-  Feb 03, 2008  R0.05a Added f_truncate().
-                       Added f_utime().
-                       Fixed off by one error at FAT sub-type determination.
-                       Fixed btr in f_read() can be mistruncated.
-                       Fixed cached sector is not flushed when create and close without write.
-
-  Apr 01, 2008  R0.06  Added f_forward(). (Tiny-FatFs)
-                       Added string functions: fputc(), fputs(), fprintf() and fgets().
-                       Improved performance of f_lseek() on move to the same or following cluster.
-
-  Apr 01, 2009, R0.07  Merged Tiny-FatFs as a buffer configuration option.
-                       Added long file name support.
-                       Added multiple code page support.
-                       Added re-entrancy for multitask operation.
-                       Added auto cluster size selection to f_mkfs().
-                       Added rewind option to f_readdir().
-                       Changed result code of critical errors.
-                       Renamed string functions to avoid name collision.
-
-  Apr 14, 2009, R0.07a Separated out OS dependent code on reentrant cfg.
-                       Added multiple sector size support.
-
-  Jun 21, 2009, R0.07c Fixed f_unlink() may return FR_OK on error.
-                       Fixed wrong cache control in f_lseek().
-                       Added relative path feature.
-                       Added f_chdir().
-                       Added f_chdrive().
-                       Added proper case conversion for extended characters.
-
-  Nov 03, 2009 R0.07e  Separated out configuration options from ff.h to ffconf.h.
-                       Added a configuration option, _LFN_UNICODE.
-                       Fixed f_unlink() fails to remove a sub-dir on _FS_RPATH.
-                       Fixed name matching error on the 13 char boundary.
-                       Changed f_readdir() to return the SFN with always upper case on non-LFN cfg.
-
-  May 15, 2010, R0.08  Added a memory configuration option. (_USE_LFN)
-                       Added file lock feature. (_FS_SHARE)
-                       Added fast seek feature. (_USE_FASTSEEK)
-                       Changed some types on the API, XCHAR->TCHAR.
-                       Changed fname member in the FILINFO structure on Unicode cfg.
-                       String functions support UTF-8 encoding files on Unicode cfg.
-
-  Aug 16,'10 R0.08a    Added f_getcwd(). (_FS_RPATH = 2)
-                       Added sector erase feature. (_USE_ERASE)
-                       Moved file lock semaphore table from fs object to the bss.
-                       Fixed a wrong directory entry is created on non-LFN cfg when the given name contains ';'.
-                       Fixed f_mkfs() creates wrong FAT32 volume.
-
-  Jan 15,'11 R0.08b    Fast seek feature is also applied to f_read() and f_write().
-                       f_lseek() reports required table size on creating CLMP.
-                       Extended format syntax of f_printf function.
-                       Ignores duplicated directory separators in given path names.
-
-  Sep 06,'11 R0.09     f_mkfs() supports multiple partition to finish the multiple partition feature.
-                       Added f_fdisk(). (_MULTI_PARTITION = 2)
-
-  Aug 27,'12 R0.09a    Fixed assertion failure due to OS/2 EA on FAT12/16.
-                       Changed API rejects null object pointer to avoid crash.
-                       Changed option name _FS_SHARE to _FS_LOCK.
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/diskio.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/diskio.c
deleted file mode 100644
index b119b1a402..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/diskio.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*-----------------------------------------------------------------------*/
-/* Low level disk I/O module skeleton for FatFs     (C)ChaN, 2007        */
-/*-----------------------------------------------------------------------*/
-/* This is a stub disk I/O module that acts as front end of the existing */
-/* disk I/O modules and attach it to FatFs module with common interface. */
-/*-----------------------------------------------------------------------*/
-
-#include "diskio.h"
-
-/*-----------------------------------------------------------------------*/
-/* Initialize a Drive                                                    */
-
-DSTATUS disk_initialize (
-	BYTE drv				/* Physical drive number (0..) */
-)
-{
-	return FR_OK;
-}
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Return Disk Status                                                    */
-
-DSTATUS disk_status (
-	BYTE drv		/* Physical drive number (0..) */
-)
-{
-	return FR_OK;
-}
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Read Sector(s)                                                        */
-
-DRESULT disk_read (
-	BYTE drv,		/* Physical drive number (0..) */
-	BYTE *buff,		/* Data buffer to store read data */
-	DWORD sector,	/* Sector address (LBA) */
-	BYTE count		/* Number of sectors to read (1..128) */
-)
-{
-	DataflashManager_ReadBlocks_RAM(sector, count, buff);
-	return RES_OK;
-}
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Write Sector(s)                                                       */
-
-#if _READONLY == 0
-DRESULT disk_write (
-	BYTE drv,			/* Physical drive number (0..) */
-	const BYTE *buff,	/* Data to be written */
-	DWORD sector,		/* Sector address (LBA) */
-	BYTE count			/* Number of sectors to write (1..128) */
-)
-{
-	DataflashManager_WriteBlocks_RAM(sector, count, buff);
-	return RES_OK;
-}
-#endif /* _READONLY */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/diskio.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/diskio.h
deleted file mode 100644
index 65e3048a0a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/diskio.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*-----------------------------------------------------------------------
-/  Low level disk interface module include file
-/-----------------------------------------------------------------------*/
-
-#ifndef _DISKIO_DEFINED
-#define _DISKIO_DEFINED
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include "integer.h"
-#include "ff.h"
-
-#include "../DataflashManager.h"
-
-
-/* Status of Disk Functions */
-typedef BYTE	DSTATUS;
-
-/* Results of Disk Functions */
-typedef enum {
-	RES_OK = 0,		/* 0: Successful */
-	RES_ERROR,		/* 1: R/W Error */
-	RES_WRPRT,		/* 2: Write Protected */
-	RES_NOTRDY,		/* 3: Not Ready */
-	RES_PARERR		/* 4: Invalid Parameter */
-} DRESULT;
-
-
-/*---------------------------------------*/
-/* Prototypes for disk control functions */
-
-DSTATUS disk_initialize (BYTE);
-DSTATUS disk_status (BYTE);
-DRESULT disk_read (BYTE, BYTE*, DWORD, BYTE);
-DRESULT disk_write (BYTE, const BYTE*, DWORD, BYTE);
-DRESULT disk_ioctl (BYTE, BYTE, void*);
-
-
-/* Disk Status Bits (DSTATUS) */
-
-#define STA_NOINIT		0x01	/* Drive not initialized */
-#define STA_NODISK		0x02	/* No medium in the drive */
-#define STA_PROTECT		0x04	/* Write protected */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/ff.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/ff.c
deleted file mode 100644
index 2f58adf837..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/ff.c
+++ /dev/null
@@ -1,4139 +0,0 @@
-/*----------------------------------------------------------------------------/
-/  FatFs - FAT file system module  R0.09a                 (C)ChaN, 2012
-/-----------------------------------------------------------------------------/
-/ FatFs module is a generic FAT file system module for small embedded systems.
-/ This is a free software that opened for education, research and commercial
-/ developments under license policy of following terms.
-/
-/  Copyright (C) 2012, ChaN, all right reserved.
-/
-/ * The FatFs module is a free software and there is NO WARRANTY.
-/ * No restriction on use. You can use, modify and redistribute it for
-/   personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY.
-/ * Redistributions of source code must retain the above copyright notice.
-/
-/-----------------------------------------------------------------------------/
-/ Feb 26,'06 R0.00  Prototype.
-/
-/ Apr 29,'06 R0.01  First stable version.
-/
-/ Jun 01,'06 R0.02  Added FAT12 support.
-/                   Removed unbuffered mode.
-/                   Fixed a problem on small (<32M) partition.
-/ Jun 10,'06 R0.02a Added a configuration option (_FS_MINIMUM).
-/
-/ Sep 22,'06 R0.03  Added f_rename().
-/                   Changed option _FS_MINIMUM to _FS_MINIMIZE.
-/ Dec 11,'06 R0.03a Improved cluster scan algorithm to write files fast.
-/                   Fixed f_mkdir() creates incorrect directory on FAT32.
-/
-/ Feb 04,'07 R0.04  Supported multiple drive system.
-/                   Changed some interfaces for multiple drive system.
-/                   Changed f_mountdrv() to f_mount().
-/                   Added f_mkfs().
-/ Apr 01,'07 R0.04a Supported multiple partitions on a physical drive.
-/                   Added a capability of extending file size to f_lseek().
-/                   Added minimization level 3.
-/                   Fixed an endian sensitive code in f_mkfs().
-/ May 05,'07 R0.04b Added a configuration option _USE_NTFLAG.
-/                   Added FSInfo support.
-/                   Fixed DBCS name can result FR_INVALID_NAME.
-/                   Fixed short seek (<= csize) collapses the file object.
-/
-/ Aug 25,'07 R0.05  Changed arguments of f_read(), f_write() and f_mkfs().
-/                   Fixed f_mkfs() on FAT32 creates incorrect FSInfo.
-/                   Fixed f_mkdir() on FAT32 creates incorrect directory.
-/ Feb 03,'08 R0.05a Added f_truncate() and f_utime().
-/                   Fixed off by one error at FAT sub-type determination.
-/                   Fixed btr in f_read() can be mistruncated.
-/                   Fixed cached sector is not flushed when create and close without write.
-/
-/ Apr 01,'08 R0.06  Added fputc(), fputs(), fprintf() and fgets().
-/                   Improved performance of f_lseek() on moving to the same or following cluster.
-/
-/ Apr 01,'09 R0.07  Merged Tiny-FatFs as a configuration option. (_FS_TINY)
-/                   Added long file name feature.
-/                   Added multiple code page feature.
-/                   Added re-entrancy for multitask operation.
-/                   Added auto cluster size selection to f_mkfs().
-/                   Added rewind option to f_readdir().
-/                   Changed result code of critical errors.
-/                   Renamed string functions to avoid name collision.
-/ Apr 14,'09 R0.07a Separated out OS dependent code on reentrant cfg.
-/                   Added multiple sector size feature.
-/ Jun 21,'09 R0.07c Fixed f_unlink() can return FR_OK on error.
-/                   Fixed wrong cache control in f_lseek().
-/                   Added relative path feature.
-/                   Added f_chdir() and f_chdrive().
-/                   Added proper case conversion to extended char.
-/ Nov 03,'09 R0.07e Separated out configuration options from ff.h to ffconf.h.
-/                   Fixed f_unlink() fails to remove a sub-dir on _FS_RPATH.
-/                   Fixed name matching error on the 13 char boundary.
-/                   Added a configuration option, _LFN_UNICODE.
-/                   Changed f_readdir() to return the SFN with always upper case on non-LFN cfg.
-/
-/ May 15,'10 R0.08  Added a memory configuration option. (_USE_LFN = 3)
-/                   Added file lock feature. (_FS_SHARE)
-/                   Added fast seek feature. (_USE_FASTSEEK)
-/                   Changed some types on the API, XCHAR->TCHAR.
-/                   Changed fname member in the FILINFO structure on Unicode cfg.
-/                   String functions support UTF-8 encoding files on Unicode cfg.
-/ Aug 16,'10 R0.08a Added f_getcwd(). (_FS_RPATH = 2)
-/                   Added sector erase feature. (_USE_ERASE)
-/                   Moved file lock semaphore table from fs object to the bss.
-/                   Fixed a wrong directory entry is created on non-LFN cfg when the given name contains ';'.
-/                   Fixed f_mkfs() creates wrong FAT32 volume.
-/ Jan 15,'11 R0.08b Fast seek feature is also applied to f_read() and f_write().
-/                   f_lseek() reports required table size on creating CLMP.
-/                   Extended format syntax of f_printf function.
-/                   Ignores duplicated directory separators in given path name.
-/
-/ Sep 06,'11 R0.09  f_mkfs() supports multiple partition to finish the multiple partition feature.
-/                   Added f_fdisk(). (_MULTI_PARTITION = 2)
-/ Aug 27,'12 R0.09a Fixed assertion failure due to OS/2 EA on FAT12/16 volume.
-/                   Changed f_open() and f_opendir reject null object pointer to avoid crash.
-/                   Changed option name _FS_SHARE to _FS_LOCK.
-/---------------------------------------------------------------------------*/
-
-#include "ff.h"			/* FatFs configurations and declarations */
-#include "diskio.h"		/* Declarations of low level disk I/O functions */
-
-
-/*--------------------------------------------------------------------------
-
-   Module Private Definitions
-
----------------------------------------------------------------------------*/
-
-#if _FATFS != 4004	/* Revision ID */
-#error Wrong include file (ff.h).
-#endif
-
-
-/* Definitions on sector size */
-#if _MAX_SS != 512 && _MAX_SS != 1024 && _MAX_SS != 2048 && _MAX_SS != 4096
-#error Wrong sector size.
-#endif
-#if _MAX_SS != 512
-#define	SS(fs)	((fs)->ssize)	/* Variable sector size */
-#else
-#define	SS(fs)	512U			/* Fixed sector size */
-#endif
-
-
-/* Reentrancy related */
-#if _FS_REENTRANT
-#if _USE_LFN == 1
-#error Static LFN work area must not be used in re-entrant configuration.
-#endif
-#define	ENTER_FF(fs)		{ if (!lock_fs(fs)) return FR_TIMEOUT; }
-#define	LEAVE_FF(fs, res)	{ unlock_fs(fs, res); return res; }
-#else
-#define	ENTER_FF(fs)
-#define LEAVE_FF(fs, res)	return res
-#endif
-
-#define	ABORT(fs, res)		{ fp->flag |= FA__ERROR; LEAVE_FF(fs, res); }
-
-
-/* File access control feature */
-#if _FS_LOCK
-#if _FS_READONLY
-#error _FS_LOCK must be 0 on read-only cfg.
-#endif
-typedef struct {
-	FATFS *fs;				/* File ID 1, volume (NULL:blank entry) */
-	DWORD clu;				/* File ID 2, directory */
-	WORD idx;				/* File ID 3, directory index */
-	WORD ctr;				/* File open counter, 0:none, 0x01..0xFF:read open count, 0x100:write mode */
-} FILESEM;
-#endif
-
-
-
-/* DBCS code ranges and SBCS extend char conversion table */
-
-#if _CODE_PAGE == 932	/* Japanese Shift-JIS */
-#define _DF1S	0x81	/* DBC 1st byte range 1 start */
-#define _DF1E	0x9F	/* DBC 1st byte range 1 end */
-#define _DF2S	0xE0	/* DBC 1st byte range 2 start */
-#define _DF2E	0xFC	/* DBC 1st byte range 2 end */
-#define _DS1S	0x40	/* DBC 2nd byte range 1 start */
-#define _DS1E	0x7E	/* DBC 2nd byte range 1 end */
-#define _DS2S	0x80	/* DBC 2nd byte range 2 start */
-#define _DS2E	0xFC	/* DBC 2nd byte range 2 end */
-
-#elif _CODE_PAGE == 936	/* Simplified Chinese GBK */
-#define _DF1S	0x81
-#define _DF1E	0xFE
-#define _DS1S	0x40
-#define _DS1E	0x7E
-#define _DS2S	0x80
-#define _DS2E	0xFE
-
-#elif _CODE_PAGE == 949	/* Korean */
-#define _DF1S	0x81
-#define _DF1E	0xFE
-#define _DS1S	0x41
-#define _DS1E	0x5A
-#define _DS2S	0x61
-#define _DS2E	0x7A
-#define _DS3S	0x81
-#define _DS3E	0xFE
-
-#elif _CODE_PAGE == 950	/* Traditional Chinese Big5 */
-#define _DF1S	0x81
-#define _DF1E	0xFE
-#define _DS1S	0x40
-#define _DS1E	0x7E
-#define _DS2S	0xA1
-#define _DS2E	0xFE
-
-#elif _CODE_PAGE == 437	/* U.S. (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x9A,0x90,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F,0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 720	/* Arabic (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x45,0x41,0x84,0x41,0x86,0x43,0x45,0x45,0x45,0x49,0x49,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x49,0x49,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 737	/* Greek (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x96,0x97,0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, \
-				0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0xAA,0x92,0x93,0x94,0x95,0x96,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0x97,0xEA,0xEB,0xEC,0xE4,0xED,0xEE,0xE7,0xE8,0xF1,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 775	/* Baltic (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x9A,0x91,0xA0,0x8E,0x95,0x8F,0x80,0xAD,0xED,0x8A,0x8A,0xA1,0x8D,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0x95,0x96,0x97,0x97,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
-				0xA0,0xA1,0xE0,0xA3,0xA3,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xB5,0xB6,0xB7,0xB8,0xBD,0xBE,0xC6,0xC7,0xA5,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE3,0xE8,0xE8,0xEA,0xEA,0xEE,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 850	/* Multilingual Latin 1 (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
-				0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 852	/* Latin 2 (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xDE,0x8F,0x80,0x9D,0xD3,0x8A,0x8A,0xD7,0x8D,0x8E,0x8F,0x90,0x91,0x91,0xE2,0x99,0x95,0x95,0x97,0x97,0x99,0x9A,0x9B,0x9B,0x9D,0x9E,0x9F, \
-				0xB5,0xD6,0xE0,0xE9,0xA4,0xA4,0xA6,0xA6,0xA8,0xA8,0xAA,0x8D,0xAC,0xB8,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBD,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC6,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD2,0xD5,0xD6,0xD7,0xB7,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE3,0xD5,0xE6,0xE6,0xE8,0xE9,0xE8,0xEB,0xED,0xED,0xDD,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xEB,0xFC,0xFC,0xFE,0xFF}
-
-#elif _CODE_PAGE == 855	/* Cyrillic (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x81,0x81,0x83,0x83,0x85,0x85,0x87,0x87,0x89,0x89,0x8B,0x8B,0x8D,0x8D,0x8F,0x8F,0x91,0x91,0x93,0x93,0x95,0x95,0x97,0x97,0x99,0x99,0x9B,0x9B,0x9D,0x9D,0x9F,0x9F, \
-				0xA1,0xA1,0xA3,0xA3,0xA5,0xA5,0xA7,0xA7,0xA9,0xA9,0xAB,0xAB,0xAD,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB6,0xB6,0xB8,0xB8,0xB9,0xBA,0xBB,0xBC,0xBE,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD3,0xD3,0xD5,0xD5,0xD7,0xD7,0xDD,0xD9,0xDA,0xDB,0xDC,0xDD,0xE0,0xDF, \
-				0xE0,0xE2,0xE2,0xE4,0xE4,0xE6,0xE6,0xE8,0xE8,0xEA,0xEA,0xEC,0xEC,0xEE,0xEE,0xEF,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF8,0xFA,0xFA,0xFC,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 857	/* Turkish (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0x98,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x98,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9E, \
-				0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA6,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xDE,0x59,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 858	/* Multilingual Latin 1 + Euro (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
-				0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 862	/* Hebrew (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 866	/* Russian (OEM) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0x90,0x91,0x92,0x93,0x9d,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F,0xF0,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 874	/* Thai (OEM, Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 1250 /* Central Europe (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \
-				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xA3,0xB4,0xB5,0xB6,0xB7,0xB8,0xA5,0xAA,0xBB,0xBC,0xBD,0xBC,0xAF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF}
-
-#elif _CODE_PAGE == 1251 /* Cyrillic (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x82,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x80,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \
-				0xA0,0xA2,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB2,0xA5,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xA3,0xBD,0xBD,0xAF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF}
-
-#elif _CODE_PAGE == 1252 /* Latin 1 (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0xAd,0x9B,0x8C,0x9D,0xAE,0x9F, \
-				0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F}
-
-#elif _CODE_PAGE == 1253 /* Greek (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xA2,0xB8,0xB9,0xBA, \
-				0xE0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xFB,0xBC,0xFD,0xBF,0xFF}
-
-#elif _CODE_PAGE == 1254 /* Turkish (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x9D,0x9E,0x9F, \
-				0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F}
-
-#elif _CODE_PAGE == 1255 /* Hebrew (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 1256 /* Arabic (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x8C,0x9D,0x9E,0x9F, \
-				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0x41,0xE1,0x41,0xE3,0xE4,0xE5,0xE6,0x43,0x45,0x45,0x45,0x45,0xEC,0xED,0x49,0x49,0xF0,0xF1,0xF2,0xF3,0x4F,0xF5,0xF6,0xF7,0xF8,0x55,0xFA,0x55,0x55,0xFD,0xFE,0xFF}
-
-#elif _CODE_PAGE == 1257 /* Baltic (Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
-				0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xBC,0xBD,0xBE,0xAF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF}
-
-#elif _CODE_PAGE == 1258 /* Vietnam (OEM, Windows) */
-#define _DF1S	0
-#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0xAC,0x9D,0x9E,0x9F, \
-				0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
-				0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xEC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xFE,0x9F}
-
-#elif _CODE_PAGE == 1	/* ASCII (for only non-LFN cfg) */
-#if _USE_LFN
-#error Cannot use LFN feature without valid code page.
-#endif
-#define _DF1S	0
-
-#else
-#error Unknown code page
-
-#endif
-
-
-/* Character code support macros */
-#define IsUpper(c)	(((c)>='A')&&((c)<='Z'))
-#define IsLower(c)	(((c)>='a')&&((c)<='z'))
-#define IsDigit(c)	(((c)>='0')&&((c)<='9'))
-
-#if _DF1S		/* Code page is DBCS */
-
-#ifdef _DF2S	/* Two 1st byte areas */
-#define IsDBCS1(c)	(((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) || ((BYTE)(c) >= _DF2S && (BYTE)(c) <= _DF2E))
-#else			/* One 1st byte area */
-#define IsDBCS1(c)	((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E)
-#endif
-
-#ifdef _DS3S	/* Three 2nd byte areas */
-#define IsDBCS2(c)	(((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E) || ((BYTE)(c) >= _DS3S && (BYTE)(c) <= _DS3E))
-#else			/* Two 2nd byte areas */
-#define IsDBCS2(c)	(((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E))
-#endif
-
-#else			/* Code page is SBCS */
-
-#define IsDBCS1(c)	0
-#define IsDBCS2(c)	0
-
-#endif /* _DF1S */
-
-
-/* Name status flags */
-#define NS			11		/* Index of name status byte in fn[] */
-#define NS_LOSS		0x01	/* Out of 8.3 format */
-#define NS_LFN		0x02	/* Force to create LFN entry */
-#define NS_LAST		0x04	/* Last segment */
-#define NS_BODY		0x08	/* Lower case flag (body) */
-#define NS_EXT		0x10	/* Lower case flag (ext) */
-#define NS_DOT		0x20	/* Dot entry */
-
-
-/* FAT sub-type boundaries */
-/* Note that the FAT spec by Microsoft says 4085 but Windows works with 4087! */
-#define MIN_FAT16	4086	/* Minimum number of clusters for FAT16 */
-#define	MIN_FAT32	65526	/* Minimum number of clusters for FAT32 */
-
-
-/* FatFs refers the members in the FAT structures as byte array instead of
-/ structure member because the structure is not binary compatible between
-/ different platforms */
-
-#define BS_jmpBoot			0	/* Jump instruction (3) */
-#define BS_OEMName			3	/* OEM name (8) */
-#define BPB_BytsPerSec		11	/* Sector size [byte] (2) */
-#define BPB_SecPerClus		13	/* Cluster size [sector] (1) */
-#define BPB_RsvdSecCnt		14	/* Size of reserved area [sector] (2) */
-#define BPB_NumFATs			16	/* Number of FAT copies (1) */
-#define BPB_RootEntCnt		17	/* Number of root dir entries for FAT12/16 (2) */
-#define BPB_TotSec16		19	/* Volume size [sector] (2) */
-#define BPB_Media			21	/* Media descriptor (1) */
-#define BPB_FATSz16			22	/* FAT size [sector] (2) */
-#define BPB_SecPerTrk		24	/* Track size [sector] (2) */
-#define BPB_NumHeads		26	/* Number of heads (2) */
-#define BPB_HiddSec			28	/* Number of special hidden sectors (4) */
-#define BPB_TotSec32		32	/* Volume size [sector] (4) */
-#define BS_DrvNum			36	/* Physical drive number (2) */
-#define BS_BootSig			38	/* Extended boot signature (1) */
-#define BS_VolID			39	/* Volume serial number (4) */
-#define BS_VolLab			43	/* Volume label (8) */
-#define BS_FilSysType		54	/* File system type (1) */
-#define BPB_FATSz32			36	/* FAT size [sector] (4) */
-#define BPB_ExtFlags		40	/* Extended flags (2) */
-#define BPB_FSVer			42	/* File system version (2) */
-#define BPB_RootClus		44	/* Root dir first cluster (4) */
-#define BPB_FSInfo			48	/* Offset of FSInfo sector (2) */
-#define BPB_BkBootSec		50	/* Offset of backup boot sector (2) */
-#define BS_DrvNum32			64	/* Physical drive number (2) */
-#define BS_BootSig32		66	/* Extended boot signature (1) */
-#define BS_VolID32			67	/* Volume serial number (4) */
-#define BS_VolLab32			71	/* Volume label (8) */
-#define BS_FilSysType32		82	/* File system type (1) */
-#define	FSI_LeadSig			0	/* FSI: Leading signature (4) */
-#define	FSI_StrucSig		484	/* FSI: Structure signature (4) */
-#define	FSI_Free_Count		488	/* FSI: Number of free clusters (4) */
-#define	FSI_Nxt_Free		492	/* FSI: Last allocated cluster (4) */
-#define MBR_Table			446	/* MBR: Partition table offset (2) */
-#define	SZ_PTE				16	/* MBR: Size of a partition table entry */
-#define BS_55AA				510	/* Boot sector signature (2) */
-
-#define	DIR_Name			0	/* Short file name (11) */
-#define	DIR_Attr			11	/* Attribute (1) */
-#define	DIR_NTres			12	/* NT flag (1) */
-#define DIR_CrtTimeTenth	13	/* Created time sub-second (1) */
-#define	DIR_CrtTime			14	/* Created time (2) */
-#define	DIR_CrtDate			16	/* Created date (2) */
-#define DIR_LstAccDate		18	/* Last accessed date (2) */
-#define	DIR_FstClusHI		20	/* Higher 16-bit of first cluster (2) */
-#define	DIR_WrtTime			22	/* Modified time (2) */
-#define	DIR_WrtDate			24	/* Modified date (2) */
-#define	DIR_FstClusLO		26	/* Lower 16-bit of first cluster (2) */
-#define	DIR_FileSize		28	/* File size (4) */
-#define	LDIR_Ord			0	/* LFN entry order and LLE flag (1) */
-#define	LDIR_Attr			11	/* LFN attribute (1) */
-#define	LDIR_Type			12	/* LFN type (1) */
-#define	LDIR_Chksum			13	/* Sum of corresponding SFN entry */
-#define	LDIR_FstClusLO		26	/* Filled by zero (0) */
-#define	SZ_DIR				32		/* Size of a directory entry */
-#define	LLE					0x40	/* Last long entry flag in LDIR_Ord */
-#define	DDE					0xE5	/* Deleted directory entry mark in DIR_Name[0] */
-#define	NDDE				0x05	/* Replacement of the character collides with DDE */
-
-
-/*------------------------------------------------------------*/
-/* Module private work area                                   */
-/*------------------------------------------------------------*/
-/* Note that uninitialized variables with static duration are
-/  zeroed/nulled at start-up. If not, the compiler or start-up
-/  routine is out of ANSI-C standard.
-*/
-
-#if _VOLUMES
-static
-FATFS *FatFs[_VOLUMES];	/* Pointer to the file system objects (logical drives) */
-#else
-#error Number of volumes must not be 0.
-#endif
-
-static
-WORD Fsid;				/* File system mount ID */
-
-#if _FS_RPATH
-static
-BYTE CurrVol;			/* Current drive */
-#endif
-
-#if _FS_LOCK
-static
-FILESEM	Files[_FS_LOCK];	/* File lock semaphores */
-#endif
-
-#if _USE_LFN == 0			/* No LFN feature */
-#define	DEF_NAMEBUF			BYTE sfn[12]
-#define INIT_BUF(dobj)		(dobj).fn = sfn
-#define	FREE_BUF()
-
-#elif _USE_LFN == 1			/* LFN feature with static working buffer */
-static WCHAR LfnBuf[_MAX_LFN+1];
-#define	DEF_NAMEBUF			BYTE sfn[12]
-#define INIT_BUF(dobj)		{ (dobj).fn = sfn; (dobj).lfn = LfnBuf; }
-#define	FREE_BUF()
-
-#elif _USE_LFN == 2 		/* LFN feature with dynamic working buffer on the stack */
-#define	DEF_NAMEBUF			BYTE sfn[12]; WCHAR lbuf[_MAX_LFN+1]
-#define INIT_BUF(dobj)		{ (dobj).fn = sfn; (dobj).lfn = lbuf; }
-#define	FREE_BUF()
-
-#elif _USE_LFN == 3 		/* LFN feature with dynamic working buffer on the heap */
-#define	DEF_NAMEBUF			BYTE sfn[12]; WCHAR *lfn
-#define INIT_BUF(dobj)		{ lfn = ff_memalloc((_MAX_LFN + 1) * 2); \
-							  if (!lfn) LEAVE_FF((dobj).fs, FR_NOT_ENOUGH_CORE); \
-							  (dobj).lfn = lfn;	(dobj).fn = sfn; }
-#define	FREE_BUF()			ff_memfree(lfn)
-
-#else
-#error Wrong LFN configuration.
-#endif
-
-
-
-
-/*--------------------------------------------------------------------------
-
-   Module Private Functions
-
----------------------------------------------------------------------------*/
-
-
-/*-----------------------------------------------------------------------*/
-/* String functions                                                      */
-/*-----------------------------------------------------------------------*/
-
-/* Copy memory to memory */
-static
-void mem_cpy (void* dst, const void* src, UINT cnt) {
-	BYTE *d = (BYTE*)dst;
-	const BYTE *s = (const BYTE*)src;
-
-#if _WORD_ACCESS == 1
-	while (cnt >= sizeof (int)) {
-		*(int*)d = *(int*)s;
-		d += sizeof (int); s += sizeof (int);
-		cnt -= sizeof (int);
-	}
-#endif
-	while (cnt--)
-		*d++ = *s++;
-}
-
-/* Fill memory */
-static
-void mem_set (void* dst, int val, UINT cnt) {
-	BYTE *d = (BYTE*)dst;
-
-	while (cnt--)
-		*d++ = (BYTE)val;
-}
-
-/* Compare memory to memory */
-static
-int mem_cmp (const void* dst, const void* src, UINT cnt) {
-	const BYTE *d = (const BYTE *)dst, *s = (const BYTE *)src;
-	int r = 0;
-
-	while (cnt-- && (r = *d++ - *s++) == 0) ;
-	return r;
-}
-
-/* Check if chr is contained in the string */
-static
-int chk_chr (const char* str, int chr) {
-	while (*str && *str != chr) str++;
-	return *str;
-}
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Request/Release grant to access the volume                            */
-/*-----------------------------------------------------------------------*/
-#if _FS_REENTRANT
-
-static
-int lock_fs (
-	FATFS *fs		/* File system object */
-)
-{
-	return ff_req_grant(fs->sobj);
-}
-
-
-static
-void unlock_fs (
-	FATFS *fs,		/* File system object */
-	FRESULT res		/* Result code to be returned */
-)
-{
-	if (fs &&
-		res != FR_NOT_ENABLED &&
-		res != FR_INVALID_DRIVE &&
-		res != FR_INVALID_OBJECT &&
-		res != FR_TIMEOUT) {
-		ff_rel_grant(fs->sobj);
-	}
-}
-#endif
-
-
-
-/*-----------------------------------------------------------------------*/
-/* File lock control functions                                           */
-/*-----------------------------------------------------------------------*/
-#if _FS_LOCK
-
-static
-FRESULT chk_lock (	/* Check if the file can be accessed */
-	DIR* dj,		/* Directory object pointing the file to be checked */
-	int acc			/* Desired access (0:Read, 1:Write, 2:Delete/Rename) */
-)
-{
-	UINT i, be;
-
-	/* Search file semaphore table */
-	for (i = be = 0; i < _FS_LOCK; i++) {
-		if (Files[i].fs) {	/* Existing entry */
-			if (Files[i].fs == dj->fs &&	 	/* Check if the file matched with an open file */
-				Files[i].clu == dj->sclust &&
-				Files[i].idx == dj->index) break;
-		} else {			/* Blank entry */
-			be++;
-		}
-	}
-	if (i == _FS_LOCK)	/* The file is not opened */
-		return (be || acc == 2) ? FR_OK : FR_TOO_MANY_OPEN_FILES;	/* Is there a blank entry for new file? */
-
-	/* The file has been opened. Reject any open against writing file and all write mode open */
-	return (acc || Files[i].ctr == 0x100) ? FR_LOCKED : FR_OK;
-}
-
-
-static
-int enq_lock (void)	/* Check if an entry is available for a new file */
-{
-	UINT i;
-
-	for (i = 0; i < _FS_LOCK && Files[i].fs; i++) ;
-	return (i == _FS_LOCK) ? 0 : 1;
-}
-
-
-static
-UINT inc_lock (	/* Increment file open counter and returns its index (0:int error) */
-	DIR* dj,	/* Directory object pointing the file to register or increment */
-	int acc		/* Desired access mode (0:Read, !0:Write) */
-)
-{
-	UINT i;
-
-
-	for (i = 0; i < _FS_LOCK; i++) {	/* Find the file */
-		if (Files[i].fs == dj->fs &&
-			Files[i].clu == dj->sclust &&
-			Files[i].idx == dj->index) break;
-	}
-
-	if (i == _FS_LOCK) {				/* Not opened. Register it as new. */
-		for (i = 0; i < _FS_LOCK && Files[i].fs; i++) ;
-		if (i == _FS_LOCK) return 0;	/* No space to register (int err) */
-		Files[i].fs = dj->fs;
-		Files[i].clu = dj->sclust;
-		Files[i].idx = dj->index;
-		Files[i].ctr = 0;
-	}
-
-	if (acc && Files[i].ctr) return 0;	/* Access violation (int err) */
-
-	Files[i].ctr = acc ? 0x100 : Files[i].ctr + 1;	/* Set semaphore value */
-
-	return i + 1;
-}
-
-
-static
-FRESULT dec_lock (	/* Decrement file open counter */
-	UINT i			/* Semaphore index */
-)
-{
-	WORD n;
-	FRESULT res;
-
-
-	if (--i < _FS_LOCK) {
-		n = Files[i].ctr;
-		if (n == 0x100) n = 0;
-		if (n) n--;
-		Files[i].ctr = n;
-		if (!n) Files[i].fs = 0;
-		res = FR_OK;
-	} else {
-		res = FR_INT_ERR;
-	}
-	return res;
-}
-
-
-static
-void clear_lock (	/* Clear lock entries of the volume */
-	FATFS *fs
-)
-{
-	UINT i;
-
-	for (i = 0; i < _FS_LOCK; i++) {
-		if (Files[i].fs == fs) Files[i].fs = 0;
-	}
-}
-#endif
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Change window offset                                                  */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT move_window (
-	FATFS *fs,		/* File system object */
-	DWORD sector	/* Sector number to make appearance in the fs->win[] */
-)					/* Move to zero only writes back dirty window */
-{
-	DWORD wsect;
-
-
-	wsect = fs->winsect;
-	if (wsect != sector) {	/* Changed current window */
-#if !_FS_READONLY
-		if (fs->wflag) {	/* Write back dirty window if needed */
-			if (disk_write(fs->drv, fs->win, wsect, 1) != RES_OK)
-				return FR_DISK_ERR;
-			fs->wflag = 0;
-			if (wsect < (fs->fatbase + fs->fsize)) {	/* In FAT area */
-				BYTE nf;
-				for (nf = fs->n_fats; nf > 1; nf--) {	/* Reflect the change to all FAT copies */
-					wsect += fs->fsize;
-					disk_write(fs->drv, fs->win, wsect, 1);
-				}
-			}
-		}
-#endif
-		if (sector) {
-			if (disk_read(fs->drv, fs->win, sector, 1) != RES_OK)
-				return FR_DISK_ERR;
-			fs->winsect = sector;
-		}
-	}
-
-	return FR_OK;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Clean-up cached data                                                  */
-/*-----------------------------------------------------------------------*/
-#if !_FS_READONLY
-static
-FRESULT sync (	/* FR_OK: successful, FR_DISK_ERR: failed */
-	FATFS *fs	/* File system object */
-)
-{
-	FRESULT res;
-
-
-	res = move_window(fs, 0);
-	if (res == FR_OK) {
-		/* Update FSInfo sector if needed */
-		if (fs->fs_type == FS_FAT32 && fs->fsi_flag) {
-			fs->winsect = 0;
-			/* Create FSInfo structure */
-			mem_set(fs->win, 0, 512);
-			ST_WORD(fs->win+BS_55AA, 0xAA55);
-			ST_DWORD(fs->win+FSI_LeadSig, 0x41615252);
-			ST_DWORD(fs->win+FSI_StrucSig, 0x61417272);
-			ST_DWORD(fs->win+FSI_Free_Count, fs->free_clust);
-			ST_DWORD(fs->win+FSI_Nxt_Free, fs->last_clust);
-			/* Write it into the FSInfo sector */
-			disk_write(fs->drv, fs->win, fs->fsi_sector, 1);
-			fs->fsi_flag = 0;
-		}
-		/* Make sure that no pending write process in the physical drive */
-		if (disk_ioctl(fs->drv, CTRL_SYNC, 0) != RES_OK)
-			res = FR_DISK_ERR;
-	}
-
-	return res;
-}
-#endif
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Get sector# from cluster#                                             */
-/*-----------------------------------------------------------------------*/
-
-
-DWORD clust2sect (	/* !=0: Sector number, 0: Failed - invalid cluster# */
-	FATFS *fs,		/* File system object */
-	DWORD clst		/* Cluster# to be converted */
-)
-{
-	clst -= 2;
-	if (clst >= (fs->n_fatent - 2)) return 0;		/* Invalid cluster# */
-	return clst * fs->csize + fs->database;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* FAT access - Read value of a FAT entry                                */
-/*-----------------------------------------------------------------------*/
-
-
-DWORD get_fat (	/* 0xFFFFFFFF:Disk error, 1:Internal error, Else:Cluster status */
-	FATFS *fs,	/* File system object */
-	DWORD clst	/* Cluster# to get the link information */
-)
-{
-	UINT wc, bc;
-	BYTE *p;
-
-
-	if (clst < 2 || clst >= fs->n_fatent)	/* Check range */
-		return 1;
-
-	switch (fs->fs_type) {
-	case FS_FAT12 :
-		bc = (UINT)clst; bc += bc / 2;
-		if (move_window(fs, fs->fatbase + (bc / SS(fs)))) break;
-		wc = fs->win[bc % SS(fs)]; bc++;
-		if (move_window(fs, fs->fatbase + (bc / SS(fs)))) break;
-		wc |= fs->win[bc % SS(fs)] << 8;
-		return (clst & 1) ? (wc >> 4) : (wc & 0xFFF);
-
-	case FS_FAT16 :
-		if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 2)))) break;
-		p = &fs->win[clst * 2 % SS(fs)];
-		return LD_WORD(p);
-
-	case FS_FAT32 :
-		if (move_window(fs, fs->fatbase + (clst / (SS(fs) / 4)))) break;
-		p = &fs->win[clst * 4 % SS(fs)];
-		return LD_DWORD(p) & 0x0FFFFFFF;
-	}
-
-	return 0xFFFFFFFF;	/* An error occurred at the disk I/O layer */
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* FAT access - Change value of a FAT entry                              */
-/*-----------------------------------------------------------------------*/
-#if !_FS_READONLY
-
-FRESULT put_fat (
-	FATFS *fs,	/* File system object */
-	DWORD clst,	/* Cluster# to be changed in range of 2 to fs->n_fatent - 1 */
-	DWORD val	/* New value to mark the cluster */
-)
-{
-	UINT bc;
-	BYTE *p;
-	FRESULT res;
-
-
-	if (clst < 2 || clst >= fs->n_fatent) {	/* Check range */
-		res = FR_INT_ERR;
-
-	} else {
-		switch (fs->fs_type) {
-		case FS_FAT12 :
-			bc = (UINT)clst; bc += bc / 2;
-			res = move_window(fs, fs->fatbase + (bc / SS(fs)));
-			if (res != FR_OK) break;
-			p = &fs->win[bc % SS(fs)];
-			*p = (clst & 1) ? ((*p & 0x0F) | ((BYTE)val << 4)) : (BYTE)val;
-			bc++;
-			fs->wflag = 1;
-			res = move_window(fs, fs->fatbase + (bc / SS(fs)));
-			if (res != FR_OK) break;
-			p = &fs->win[bc % SS(fs)];
-			*p = (clst & 1) ? (BYTE)(val >> 4) : ((*p & 0xF0) | ((BYTE)(val >> 8) & 0x0F));
-			break;
-
-		case FS_FAT16 :
-			res = move_window(fs, fs->fatbase + (clst / (SS(fs) / 2)));
-			if (res != FR_OK) break;
-			p = &fs->win[clst * 2 % SS(fs)];
-			ST_WORD(p, (WORD)val);
-			break;
-
-		case FS_FAT32 :
-			res = move_window(fs, fs->fatbase + (clst / (SS(fs) / 4)));
-			if (res != FR_OK) break;
-			p = &fs->win[clst * 4 % SS(fs)];
-			val |= LD_DWORD(p) & 0xF0000000;
-			ST_DWORD(p, val);
-			break;
-
-		default :
-			res = FR_INT_ERR;
-		}
-		fs->wflag = 1;
-	}
-
-	return res;
-}
-#endif /* !_FS_READONLY */
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* FAT handling - Remove a cluster chain                                 */
-/*-----------------------------------------------------------------------*/
-#if !_FS_READONLY
-static
-FRESULT remove_chain (
-	FATFS *fs,			/* File system object */
-	DWORD clst			/* Cluster# to remove a chain from */
-)
-{
-	FRESULT res;
-	DWORD nxt;
-#if _USE_ERASE
-	DWORD scl = clst, ecl = clst, rt[2];
-#endif
-
-	if (clst < 2 || clst >= fs->n_fatent) {	/* Check range */
-		res = FR_INT_ERR;
-
-	} else {
-		res = FR_OK;
-		while (clst < fs->n_fatent) {			/* Not a last link? */
-			nxt = get_fat(fs, clst);			/* Get cluster status */
-			if (nxt == 0) break;				/* Empty cluster? */
-			if (nxt == 1) { res = FR_INT_ERR; break; }	/* Internal error? */
-			if (nxt == 0xFFFFFFFF) { res = FR_DISK_ERR; break; }	/* Disk error? */
-			res = put_fat(fs, clst, 0);			/* Mark the cluster "empty" */
-			if (res != FR_OK) break;
-			if (fs->free_clust != 0xFFFFFFFF) {	/* Update FSInfo */
-				fs->free_clust++;
-				fs->fsi_flag = 1;
-			}
-#if _USE_ERASE
-			if (ecl + 1 == nxt) {	/* Is next cluster contiguous? */
-				ecl = nxt;
-			} else {				/* End of contiguous clusters */ 
-				rt[0] = clust2sect(fs, scl);					/* Start sector */
-				rt[1] = clust2sect(fs, ecl) + fs->csize - 1;	/* End sector */
-				disk_ioctl(fs->drv, CTRL_ERASE_SECTOR, rt);		/* Erase the block */
-				scl = ecl = nxt;
-			}
-#endif
-			clst = nxt;	/* Next cluster */
-		}
-	}
-
-	return res;
-}
-#endif
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* FAT handling - Stretch or Create a cluster chain                      */
-/*-----------------------------------------------------------------------*/
-#if !_FS_READONLY
-static
-DWORD create_chain (	/* 0:No free cluster, 1:Internal error, 0xFFFFFFFF:Disk error, >=2:New cluster# */
-	FATFS *fs,			/* File system object */
-	DWORD clst			/* Cluster# to stretch. 0 means create a new chain. */
-)
-{
-	DWORD cs, ncl, scl;
-	FRESULT res;
-
-
-	if (clst == 0) {		/* Create a new chain */
-		scl = fs->last_clust;			/* Get suggested start point */
-		if (!scl || scl >= fs->n_fatent) scl = 1;
-	}
-	else {					/* Stretch the current chain */
-		cs = get_fat(fs, clst);			/* Check the cluster status */
-		if (cs < 2) return 1;			/* It is an invalid cluster */
-		if (cs < fs->n_fatent) return cs;	/* It is already followed by next cluster */
-		scl = clst;
-	}
-
-	ncl = scl;				/* Start cluster */
-	for (;;) {
-		ncl++;							/* Next cluster */
-		if (ncl >= fs->n_fatent) {		/* Wrap around */
-			ncl = 2;
-			if (ncl > scl) return 0;	/* No free cluster */
-		}
-		cs = get_fat(fs, ncl);			/* Get the cluster status */
-		if (cs == 0) break;				/* Found a free cluster */
-		if (cs == 0xFFFFFFFF || cs == 1)/* An error occurred */
-			return cs;
-		if (ncl == scl) return 0;		/* No free cluster */
-	}
-
-	res = put_fat(fs, ncl, 0x0FFFFFFF);	/* Mark the new cluster "last link" */
-	if (res == FR_OK && clst != 0) {
-		res = put_fat(fs, clst, ncl);	/* Link it to the previous one if needed */
-	}
-	if (res == FR_OK) {
-		fs->last_clust = ncl;			/* Update FSINFO */
-		if (fs->free_clust != 0xFFFFFFFF) {
-			fs->free_clust--;
-			fs->fsi_flag = 1;
-		}
-	} else {
-		ncl = (res == FR_DISK_ERR) ? 0xFFFFFFFF : 1;
-	}
-
-	return ncl;		/* Return new cluster number or error code */
-}
-#endif /* !_FS_READONLY */
-
-
-
-/*-----------------------------------------------------------------------*/
-/* FAT handling - Convert offset into cluster with link map table        */
-/*-----------------------------------------------------------------------*/
-
-#if _USE_FASTSEEK
-static
-DWORD clmt_clust (	/* <2:Error, >=2:Cluster number */
-	FIL* fp,		/* Pointer to the file object */
-	DWORD ofs		/* File offset to be converted to cluster# */
-)
-{
-	DWORD cl, ncl, *tbl;
-
-
-	tbl = fp->cltbl + 1;	/* Top of CLMT */
-	cl = ofs / SS(fp->fs) / fp->fs->csize;	/* Cluster order from top of the file */
-	for (;;) {
-		ncl = *tbl++;			/* Number of cluters in the fragment */
-		if (!ncl) return 0;		/* End of table? (error) */
-		if (cl < ncl) break;	/* In this fragment? */
-		cl -= ncl; tbl++;		/* Next fragment */
-	}
-	return cl + *tbl;	/* Return the cluster number */
-}
-#endif	/* _USE_FASTSEEK */
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Directory handling - Set directory index                              */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT dir_sdi (
-	DIR *dj,		/* Pointer to directory object */
-	WORD idx		/* Index of directory table */
-)
-{
-	DWORD clst;
-	WORD ic;
-
-
-	dj->index = idx;
-	clst = dj->sclust;
-	if (clst == 1 || clst >= dj->fs->n_fatent)	/* Check start cluster range */
-		return FR_INT_ERR;
-	if (!clst && dj->fs->fs_type == FS_FAT32)	/* Replace cluster# 0 with root cluster# if in FAT32 */
-		clst = dj->fs->dirbase;
-
-	if (clst == 0) {	/* Static table (root-dir in FAT12/16) */
-		dj->clust = clst;
-		if (idx >= dj->fs->n_rootdir)		/* Index is out of range */
-			return FR_INT_ERR;
-		dj->sect = dj->fs->dirbase + idx / (SS(dj->fs) / SZ_DIR);	/* Sector# */
-	}
-	else {				/* Dynamic table (sub-dirs or root-dir in FAT32) */
-		ic = SS(dj->fs) / SZ_DIR * dj->fs->csize;	/* Entries per cluster */
-		while (idx >= ic) {	/* Follow cluster chain */
-			clst = get_fat(dj->fs, clst);				/* Get next cluster */
-			if (clst == 0xFFFFFFFF) return FR_DISK_ERR;	/* Disk error */
-			if (clst < 2 || clst >= dj->fs->n_fatent)	/* Reached to end of table or int error */
-				return FR_INT_ERR;
-			idx -= ic;
-		}
-		dj->clust = clst;
-		dj->sect = clust2sect(dj->fs, clst) + idx / (SS(dj->fs) / SZ_DIR);	/* Sector# */
-	}
-
-	dj->dir = dj->fs->win + (idx % (SS(dj->fs) / SZ_DIR)) * SZ_DIR;	/* Ptr to the entry in the sector */
-
-	return FR_OK;	/* Seek succeeded */
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Directory handling - Move directory table index next                  */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT dir_next (	/* FR_OK:Succeeded, FR_NO_FILE:End of table, FR_DENIED:EOT and could not stretch */
-	DIR *dj,		/* Pointer to directory object */
-	int stretch		/* 0: Do not stretch table, 1: Stretch table if needed */
-)
-{
-	DWORD clst;
-	WORD i;
-
-
-	stretch = stretch;		/* To suppress warning on read-only cfg. */
-	i = dj->index + 1;
-	if (!i || !dj->sect)	/* Report EOT when index has reached 65535 */
-		return FR_NO_FILE;
-
-	if (!(i % (SS(dj->fs) / SZ_DIR))) {	/* Sector changed? */
-		dj->sect++;					/* Next sector */
-
-		if (dj->clust == 0) {	/* Static table */
-			if (i >= dj->fs->n_rootdir)	/* Report EOT when end of table */
-				return FR_NO_FILE;
-		}
-		else {					/* Dynamic table */
-			if (((i / (SS(dj->fs) / SZ_DIR)) & (dj->fs->csize - 1)) == 0) {	/* Cluster changed? */
-				clst = get_fat(dj->fs, dj->clust);				/* Get next cluster */
-				if (clst <= 1) return FR_INT_ERR;
-				if (clst == 0xFFFFFFFF) return FR_DISK_ERR;
-				if (clst >= dj->fs->n_fatent) {					/* When it reached end of dynamic table */
-#if !_FS_READONLY
-					BYTE c;
-					if (!stretch) return FR_NO_FILE;			/* When do not stretch, report EOT */
-					clst = create_chain(dj->fs, dj->clust);		/* Stretch cluster chain */
-					if (clst == 0) return FR_DENIED;			/* No free cluster */
-					if (clst == 1) return FR_INT_ERR;
-					if (clst == 0xFFFFFFFF) return FR_DISK_ERR;
-					/* Clean-up stretched table */
-					if (move_window(dj->fs, 0)) return FR_DISK_ERR;	/* Flush active window */
-					mem_set(dj->fs->win, 0, SS(dj->fs));			/* Clear window buffer */
-					dj->fs->winsect = clust2sect(dj->fs, clst);	/* Cluster start sector */
-					for (c = 0; c < dj->fs->csize; c++) {		/* Fill the new cluster with 0 */
-						dj->fs->wflag = 1;
-						if (move_window(dj->fs, 0)) return FR_DISK_ERR;
-						dj->fs->winsect++;
-					}
-					dj->fs->winsect -= c;						/* Rewind window address */
-#else
-					return FR_NO_FILE;			/* Report EOT */
-#endif
-				}
-				dj->clust = clst;				/* Initialize data for new cluster */
-				dj->sect = clust2sect(dj->fs, clst);
-			}
-		}
-	}
-
-	dj->index = i;
-	dj->dir = dj->fs->win + (i % (SS(dj->fs) / SZ_DIR)) * SZ_DIR;
-
-	return FR_OK;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Directory handling - Load/Store start cluster number                  */
-/*-----------------------------------------------------------------------*/
-
-static
-DWORD ld_clust (
-	FATFS *fs,	/* Pointer to the fs object */
-	BYTE *dir	/* Pointer to the directory entry */
-)
-{
-	DWORD cl;
-
-	cl = LD_WORD(dir+DIR_FstClusLO);
-	if (fs->fs_type == FS_FAT32)
-		cl |= (DWORD)LD_WORD(dir+DIR_FstClusHI) << 16;
-
-	return cl;
-}
-
-
-#if !_FS_READONLY
-static
-void st_clust (
-	BYTE *dir,	/* Pointer to the directory entry */
-	DWORD cl	/* Value to be set */
-)
-{
-	ST_WORD(dir+DIR_FstClusLO, cl);
-	ST_WORD(dir+DIR_FstClusHI, cl >> 16);
-}
-#endif
-
-
-
-/*-----------------------------------------------------------------------*/
-/* LFN handling - Test/Pick/Fit an LFN segment from/to directory entry   */
-/*-----------------------------------------------------------------------*/
-#if _USE_LFN
-static
-const BYTE LfnOfs[] = {1,3,5,7,9,14,16,18,20,22,24,28,30};	/* Offset of LFN chars in the directory entry */
-
-
-static
-int cmp_lfn (			/* 1:Matched, 0:Not matched */
-	WCHAR *lfnbuf,		/* Pointer to the LFN to be compared */
-	BYTE *dir			/* Pointer to the directory entry containing a part of LFN */
-)
-{
-	UINT i, s;
-	WCHAR wc, uc;
-
-
-	i = ((dir[LDIR_Ord] & ~LLE) - 1) * 13;	/* Get offset in the LFN buffer */
-	s = 0; wc = 1;
-	do {
-		uc = LD_WORD(dir+LfnOfs[s]);	/* Pick an LFN character from the entry */
-		if (wc) {	/* Last char has not been processed */
-			wc = ff_wtoupper(uc);		/* Convert it to upper case */
-			if (i >= _MAX_LFN || wc != ff_wtoupper(lfnbuf[i++]))	/* Compare it */
-				return 0;				/* Not matched */
-		} else {
-			if (uc != 0xFFFF) return 0;	/* Check filler */
-		}
-	} while (++s < 13);				/* Repeat until all chars in the entry are checked */
-
-	if ((dir[LDIR_Ord] & LLE) && wc && lfnbuf[i])	/* Last segment matched but different length */
-		return 0;
-
-	return 1;						/* The part of LFN matched */
-}
-
-
-
-static
-int pick_lfn (			/* 1:Succeeded, 0:Buffer overflow */
-	WCHAR *lfnbuf,		/* Pointer to the Unicode-LFN buffer */
-	BYTE *dir			/* Pointer to the directory entry */
-)
-{
-	UINT i, s;
-	WCHAR wc, uc;
-
-
-	i = ((dir[LDIR_Ord] & 0x3F) - 1) * 13;	/* Offset in the LFN buffer */
-
-	s = 0; wc = 1;
-	do {
-		uc = LD_WORD(dir+LfnOfs[s]);		/* Pick an LFN character from the entry */
-		if (wc) {	/* Last char has not been processed */
-			if (i >= _MAX_LFN) return 0;	/* Buffer overflow? */
-			lfnbuf[i++] = wc = uc;			/* Store it */
-		} else {
-			if (uc != 0xFFFF) return 0;		/* Check filler */
-		}
-	} while (++s < 13);						/* Read all character in the entry */
-
-	if (dir[LDIR_Ord] & LLE) {				/* Put terminator if it is the last LFN part */
-		if (i >= _MAX_LFN) return 0;		/* Buffer overflow? */
-		lfnbuf[i] = 0;
-	}
-
-	return 1;
-}
-
-
-#if !_FS_READONLY
-static
-void fit_lfn (
-	const WCHAR *lfnbuf,	/* Pointer to the LFN buffer */
-	BYTE *dir,				/* Pointer to the directory entry */
-	BYTE ord,				/* LFN order (1-20) */
-	BYTE sum				/* SFN sum */
-)
-{
-	UINT i, s;
-	WCHAR wc;
-
-
-	dir[LDIR_Chksum] = sum;			/* Set check sum */
-	dir[LDIR_Attr] = AM_LFN;		/* Set attribute. LFN entry */
-	dir[LDIR_Type] = 0;
-	ST_WORD(dir+LDIR_FstClusLO, 0);
-
-	i = (ord - 1) * 13;				/* Get offset in the LFN buffer */
-	s = wc = 0;
-	do {
-		if (wc != 0xFFFF) wc = lfnbuf[i++];	/* Get an effective char */
-		ST_WORD(dir+LfnOfs[s], wc);	/* Put it */
-		if (!wc) wc = 0xFFFF;		/* Padding chars following last char */
-	} while (++s < 13);
-	if (wc == 0xFFFF || !lfnbuf[i]) ord |= LLE;	/* Bottom LFN part is the start of LFN sequence */
-	dir[LDIR_Ord] = ord;			/* Set the LFN order */
-}
-
-#endif
-#endif
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Create numbered name                                                  */
-/*-----------------------------------------------------------------------*/
-#if _USE_LFN
-void gen_numname (
-	BYTE *dst,			/* Pointer to generated SFN */
-	const BYTE *src,	/* Pointer to source SFN to be modified */
-	const WCHAR *lfn,	/* Pointer to LFN */
-	WORD seq			/* Sequence number */
-)
-{
-	BYTE ns[8], c;
-	UINT i, j;
-
-
-	mem_cpy(dst, src, 11);
-
-	if (seq > 5) {	/* On many collisions, generate a hash number instead of sequential number */
-		do seq = (seq >> 1) + (seq << 15) + (WORD)*lfn++; while (*lfn);
-	}
-
-	/* itoa (hexdecimal) */
-	i = 7;
-	do {
-		c = (seq % 16) + '0';
-		if (c > '9') c += 7;
-		ns[i--] = c;
-		seq /= 16;
-	} while (seq);
-	ns[i] = '~';
-
-	/* Append the number */
-	for (j = 0; j < i && dst[j] != ' '; j++) {
-		if (IsDBCS1(dst[j])) {
-			if (j == i - 1) break;
-			j++;
-		}
-	}
-	do {
-		dst[j++] = (i < 8) ? ns[i++] : ' ';
-	} while (j < 8);
-}
-#endif
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Calculate sum of an SFN                                               */
-/*-----------------------------------------------------------------------*/
-#if _USE_LFN
-static
-BYTE sum_sfn (
-	const BYTE *dir		/* Ptr to directory entry */
-)
-{
-	BYTE sum = 0;
-	UINT n = 11;
-
-	do sum = (sum >> 1) + (sum << 7) + *dir++; while (--n);
-	return sum;
-}
-#endif
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Directory handling - Find an object in the directory                  */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT dir_find (
-	DIR *dj			/* Pointer to the directory object linked to the file name */
-)
-{
-	FRESULT res;
-	BYTE c, *dir;
-#if _USE_LFN
-	BYTE a, ord, sum;
-#endif
-
-	res = dir_sdi(dj, 0);			/* Rewind directory object */
-	if (res != FR_OK) return res;
-
-#if _USE_LFN
-	ord = sum = 0xFF;
-#endif
-	do {
-		res = move_window(dj->fs, dj->sect);
-		if (res != FR_OK) break;
-		dir = dj->dir;					/* Ptr to the directory entry of current index */
-		c = dir[DIR_Name];
-		if (c == 0) { res = FR_NO_FILE; break; }	/* Reached to end of table */
-#if _USE_LFN	/* LFN configuration */
-		a = dir[DIR_Attr] & AM_MASK;
-		if (c == DDE || ((a & AM_VOL) && a != AM_LFN)) {	/* An entry without valid data */
-			ord = 0xFF;
-		} else {
-			if (a == AM_LFN) {			/* An LFN entry is found */
-				if (dj->lfn) {
-					if (c & LLE) {		/* Is it start of LFN sequence? */
-						sum = dir[LDIR_Chksum];
-						c &= ~LLE; ord = c;	/* LFN start order */
-						dj->lfn_idx = dj->index;
-					}
-					/* Check validity of the LFN entry and compare it with given name */
-					ord = (c == ord && sum == dir[LDIR_Chksum] && cmp_lfn(dj->lfn, dir)) ? ord - 1 : 0xFF;
-				}
-			} else {					/* An SFN entry is found */
-				if (!ord && sum == sum_sfn(dir)) break;	/* LFN matched? */
-				ord = 0xFF; dj->lfn_idx = 0xFFFF;	/* Reset LFN sequence */
-				if (!(dj->fn[NS] & NS_LOSS) && !mem_cmp(dir, dj->fn, 11)) break;	/* SFN matched? */
-			}
-		}
-#else		/* Non LFN configuration */
-		if (!(dir[DIR_Attr] & AM_VOL) && !mem_cmp(dir, dj->fn, 11)) /* Is it a valid entry? */
-			break;
-#endif
-		res = dir_next(dj, 0);		/* Next entry */
-	} while (res == FR_OK);
-
-	return res;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Read an object from the directory                                     */
-/*-----------------------------------------------------------------------*/
-#if _FS_MINIMIZE <= 1
-static
-FRESULT dir_read (
-	DIR *dj			/* Pointer to the directory object that pointing the entry to be read */
-)
-{
-	FRESULT res;
-	BYTE c, *dir;
-#if _USE_LFN
-	BYTE a, ord = 0xFF, sum = 0xFF;
-#endif
-
-	res = FR_NO_FILE;
-	while (dj->sect) {
-		res = move_window(dj->fs, dj->sect);
-		if (res != FR_OK) break;
-		dir = dj->dir;					/* Ptr to the directory entry of current index */
-		c = dir[DIR_Name];
-		if (c == 0) { res = FR_NO_FILE; break; }	/* Reached to end of table */
-#if _USE_LFN	/* LFN configuration */
-		a = dir[DIR_Attr] & AM_MASK;
-		if (c == DDE || (!_FS_RPATH && c == '.') || ((a & AM_VOL) && a != AM_LFN)) {	/* An entry without valid data */
-			ord = 0xFF;
-		} else {
-			if (a == AM_LFN) {			/* An LFN entry is found */
-				if (c & LLE) {			/* Is it start of LFN sequence? */
-					sum = dir[LDIR_Chksum];
-					c &= ~LLE; ord = c;
-					dj->lfn_idx = dj->index;
-				}
-				/* Check LFN validity and capture it */
-				ord = (c == ord && sum == dir[LDIR_Chksum] && pick_lfn(dj->lfn, dir)) ? ord - 1 : 0xFF;
-			} else {					/* An SFN entry is found */
-				if (ord || sum != sum_sfn(dir))	/* Is there a valid LFN? */
-					dj->lfn_idx = 0xFFFF;		/* It has no LFN. */
-				break;
-			}
-		}
-#else		/* Non LFN configuration */
-		if (c != DDE && (_FS_RPATH || c != '.') && !(dir[DIR_Attr] & AM_VOL))	/* Is it a valid entry? */
-			break;
-#endif
-		res = dir_next(dj, 0);				/* Next entry */
-		if (res != FR_OK) break;
-	}
-
-	if (res != FR_OK) dj->sect = 0;
-
-	return res;
-}
-#endif
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Register an object to the directory                                   */
-/*-----------------------------------------------------------------------*/
-#if !_FS_READONLY
-static
-FRESULT dir_register (	/* FR_OK:Successful, FR_DENIED:No free entry or too many SFN collision, FR_DISK_ERR:Disk error */
-	DIR *dj				/* Target directory with object name to be created */
-)
-{
-	FRESULT res;
-	BYTE c, *dir;
-#if _USE_LFN	/* LFN configuration */
-	WORD n, ne, is;
-	BYTE sn[12], *fn, sum;
-	WCHAR *lfn;
-
-
-	fn = dj->fn; lfn = dj->lfn;
-	mem_cpy(sn, fn, 12);
-
-	if (_FS_RPATH && (sn[NS] & NS_DOT))		/* Cannot create dot entry */
-		return FR_INVALID_NAME;
-
-	if (sn[NS] & NS_LOSS) {			/* When LFN is out of 8.3 format, generate a numbered name */
-		fn[NS] = 0; dj->lfn = 0;			/* Find only SFN */
-		for (n = 1; n < 100; n++) {
-			gen_numname(fn, sn, lfn, n);	/* Generate a numbered name */
-			res = dir_find(dj);				/* Check if the name collides with existing SFN */
-			if (res != FR_OK) break;
-		}
-		if (n == 100) return FR_DENIED;		/* Abort if too many collisions */
-		if (res != FR_NO_FILE) return res;	/* Abort if the result is other than 'not collided' */
-		fn[NS] = sn[NS]; dj->lfn = lfn;
-	}
-
-	if (sn[NS] & NS_LFN) {			/* When LFN is to be created, reserve an SFN + LFN entries. */
-		for (ne = 0; lfn[ne]; ne++) ;
-		ne = (ne + 25) / 13;
-	} else {						/* Otherwise reserve only an SFN entry. */
-		ne = 1;
-	}
-
-	/* Reserve contiguous entries */
-	res = dir_sdi(dj, 0);
-	if (res != FR_OK) return res;
-	n = is = 0;
-	do {
-		res = move_window(dj->fs, dj->sect);
-		if (res != FR_OK) break;
-		c = *dj->dir;				/* Check the entry status */
-		if (c == DDE || c == 0) {	/* Is it a blank entry? */
-			if (n == 0) is = dj->index;	/* First index of the contiguous entry */
-			if (++n == ne) break;	/* A contiguous entry that required count is found */
-		} else {
-			n = 0;					/* Not a blank entry. Restart to search */
-		}
-		res = dir_next(dj, 1);		/* Next entry with table stretch */
-	} while (res == FR_OK);
-
-	if (res == FR_OK && ne > 1) {	/* Initialize LFN entry if needed */
-		res = dir_sdi(dj, is);
-		if (res == FR_OK) {
-			sum = sum_sfn(dj->fn);	/* Sum of the SFN tied to the LFN */
-			ne--;
-			do {					/* Store LFN entries in bottom first */
-				res = move_window(dj->fs, dj->sect);
-				if (res != FR_OK) break;
-				fit_lfn(dj->lfn, dj->dir, (BYTE)ne, sum);
-				dj->fs->wflag = 1;
-				res = dir_next(dj, 0);	/* Next entry */
-			} while (res == FR_OK && --ne);
-		}
-	}
-
-#else	/* Non LFN configuration */
-	res = dir_sdi(dj, 0);
-	if (res == FR_OK) {
-		do {	/* Find a blank entry for the SFN */
-			res = move_window(dj->fs, dj->sect);
-			if (res != FR_OK) break;
-			c = *dj->dir;
-			if (c == DDE || c == 0) break;	/* Is it a blank entry? */
-			res = dir_next(dj, 1);			/* Next entry with table stretch */
-		} while (res == FR_OK);
-	}
-#endif
-
-	if (res == FR_OK) {		/* Initialize the SFN entry */
-		res = move_window(dj->fs, dj->sect);
-		if (res == FR_OK) {
-			dir = dj->dir;
-			mem_set(dir, 0, SZ_DIR);	/* Clean the entry */
-			mem_cpy(dir, dj->fn, 11);	/* Put SFN */
-#if _USE_LFN
-			dir[DIR_NTres] = *(dj->fn+NS) & (NS_BODY | NS_EXT);	/* Put NT flag */
-#endif
-			dj->fs->wflag = 1;
-		}
-	}
-
-	return res;
-}
-#endif /* !_FS_READONLY */
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Remove an object from the directory                                   */
-/*-----------------------------------------------------------------------*/
-#if !_FS_READONLY && !_FS_MINIMIZE
-static
-FRESULT dir_remove (	/* FR_OK: Successful, FR_DISK_ERR: A disk error */
-	DIR *dj				/* Directory object pointing the entry to be removed */
-)
-{
-	FRESULT res;
-#if _USE_LFN	/* LFN configuration */
-	WORD i;
-
-	i = dj->index;	/* SFN index */
-	res = dir_sdi(dj, (WORD)((dj->lfn_idx == 0xFFFF) ? i : dj->lfn_idx));	/* Goto the SFN or top of the LFN entries */
-	if (res == FR_OK) {
-		do {
-			res = move_window(dj->fs, dj->sect);
-			if (res != FR_OK) break;
-			*dj->dir = DDE;			/* Mark the entry "deleted" */
-			dj->fs->wflag = 1;
-			if (dj->index >= i) break;	/* When reached SFN, all entries of the object has been deleted. */
-			res = dir_next(dj, 0);		/* Next entry */
-		} while (res == FR_OK);
-		if (res == FR_NO_FILE) res = FR_INT_ERR;
-	}
-
-#else			/* Non LFN configuration */
-	res = dir_sdi(dj, dj->index);
-	if (res == FR_OK) {
-		res = move_window(dj->fs, dj->sect);
-		if (res == FR_OK) {
-			*dj->dir = DDE;			/* Mark the entry "deleted" */
-			dj->fs->wflag = 1;
-		}
-	}
-#endif
-
-	return res;
-}
-#endif /* !_FS_READONLY */
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Pick a segment and create the object name in directory form           */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT create_name (
-	DIR *dj,			/* Pointer to the directory object */
-	const TCHAR **path	/* Pointer to pointer to the segment in the path string */
-)
-{
-#ifdef _EXCVT
-	static const BYTE excvt[] = _EXCVT;	/* Upper conversion table for extended chars */
-#endif
-
-#if _USE_LFN	/* LFN configuration */
-	BYTE b, cf;
-	WCHAR w, *lfn;
-	UINT i, ni, si, di;
-	const TCHAR *p;
-
-	/* Create LFN in Unicode */
-	for (p = *path; *p == '/' || *p == '\\'; p++) ;	/* Strip duplicated separator */
-	lfn = dj->lfn;
-	si = di = 0;
-	for (;;) {
-		w = p[si++];					/* Get a character */
-		if (w < ' ' || w == '/' || w == '\\') break;	/* Break on end of segment */
-		if (di >= _MAX_LFN)				/* Reject too long name */
-			return FR_INVALID_NAME;
-#if !_LFN_UNICODE
-		w &= 0xFF;
-		if (IsDBCS1(w)) {				/* Check if it is a DBC 1st byte (always false on SBCS cfg) */
-			b = (BYTE)p[si++];			/* Get 2nd byte */
-			if (!IsDBCS2(b))
-				return FR_INVALID_NAME;	/* Reject invalid sequence */
-			w = (w << 8) + b;			/* Create a DBC */
-		}
-		w = ff_convert(w, 1);			/* Convert ANSI/OEM to Unicode */
-		if (!w) return FR_INVALID_NAME;	/* Reject invalid code */
-#endif
-		if (w < 0x80 && chk_chr("\"*:<>\?|\x7F", w)) /* Reject illegal chars for LFN */
-			return FR_INVALID_NAME;
-		lfn[di++] = w;					/* Store the Unicode char */
-	}
-	*path = &p[si];						/* Return pointer to the next segment */
-	cf = (w < ' ') ? NS_LAST : 0;		/* Set last segment flag if end of path */
-#if _FS_RPATH
-	if ((di == 1 && lfn[di-1] == '.') || /* Is this a dot entry? */
-		(di == 2 && lfn[di-1] == '.' && lfn[di-2] == '.')) {
-		lfn[di] = 0;
-		for (i = 0; i < 11; i++)
-			dj->fn[i] = (i < di) ? '.' : ' ';
-		dj->fn[i] = cf | NS_DOT;		/* This is a dot entry */
-		return FR_OK;
-	}
-#endif
-	while (di) {						/* Strip trailing spaces and dots */
-		w = lfn[di-1];
-		if (w != ' ' && w != '.') break;
-		di--;
-	}
-	if (!di) return FR_INVALID_NAME;	/* Reject nul string */
-
-	lfn[di] = 0;						/* LFN is created */
-
-	/* Create SFN in directory form */
-	mem_set(dj->fn, ' ', 11);
-	for (si = 0; lfn[si] == ' ' || lfn[si] == '.'; si++) ;	/* Strip leading spaces and dots */
-	if (si) cf |= NS_LOSS | NS_LFN;
-	while (di && lfn[di - 1] != '.') di--;	/* Find extension (di<=si: no extension) */
-
-	b = i = 0; ni = 8;
-	for (;;) {
-		w = lfn[si++];					/* Get an LFN char */
-		if (!w) break;					/* Break on end of the LFN */
-		if (w == ' ' || (w == '.' && si != di)) {	/* Remove spaces and dots */
-			cf |= NS_LOSS | NS_LFN; continue;
-		}
-
-		if (i >= ni || si == di) {		/* Extension or end of SFN */
-			if (ni == 11) {				/* Long extension */
-				cf |= NS_LOSS | NS_LFN; break;
-			}
-			if (si != di) cf |= NS_LOSS | NS_LFN;	/* Out of 8.3 format */
-			if (si > di) break;			/* No extension */
-			si = di; i = 8; ni = 11;	/* Enter extension section */
-			b <<= 2; continue;
-		}
-
-		if (w >= 0x80) {				/* Non ASCII char */
-#ifdef _EXCVT
-			w = ff_convert(w, 0);		/* Unicode -> OEM code */
-			if (w) w = excvt[w - 0x80];	/* Convert extended char to upper (SBCS) */
-#else
-			w = ff_convert(ff_wtoupper(w), 0);	/* Upper converted Unicode -> OEM code */
-#endif
-			cf |= NS_LFN;				/* Force create LFN entry */
-		}
-
-		if (_DF1S && w >= 0x100) {		/* Double byte char (always false on SBCS cfg) */
-			if (i >= ni - 1) {
-				cf |= NS_LOSS | NS_LFN; i = ni; continue;
-			}
-			dj->fn[i++] = (BYTE)(w >> 8);
-		} else {						/* Single byte char */
-			if (!w || chk_chr("+,;=[]", w)) {	/* Replace illegal chars for SFN */
-				w = '_'; cf |= NS_LOSS | NS_LFN;/* Lossy conversion */
-			} else {
-				if (IsUpper(w)) {		/* ASCII large capital */
-					b |= 2;
-				} else {
-					if (IsLower(w)) {	/* ASCII small capital */
-						b |= 1; w -= 0x20;
-					}
-				}
-			}
-		}
-		dj->fn[i++] = (BYTE)w;
-	}
-
-	if (dj->fn[0] == DDE) dj->fn[0] = NDDE;	/* If the first char collides with deleted mark, replace it with 0x05 */
-
-	if (ni == 8) b <<= 2;
-	if ((b & 0x0C) == 0x0C || (b & 0x03) == 0x03)	/* Create LFN entry when there are composite capitals */
-		cf |= NS_LFN;
-	if (!(cf & NS_LFN)) {						/* When LFN is in 8.3 format without extended char, NT flags are created */
-		if ((b & 0x03) == 0x01) cf |= NS_EXT;	/* NT flag (Extension has only small capital) */
-		if ((b & 0x0C) == 0x04) cf |= NS_BODY;	/* NT flag (Filename has only small capital) */
-	}
-
-	dj->fn[NS] = cf;	/* SFN is created */
-
-	return FR_OK;
-
-
-#else	/* Non-LFN configuration */
-	BYTE b, c, d, *sfn;
-	UINT ni, si, i;
-	const char *p;
-
-	/* Create file name in directory form */
-	for (p = *path; *p == '/' || *p == '\\'; p++) ;	/* Strip duplicated separator */
-	sfn = dj->fn;
-	mem_set(sfn, ' ', 11);
-	si = i = b = 0; ni = 8;
-#if _FS_RPATH
-	if (p[si] == '.') { /* Is this a dot entry? */
-		for (;;) {
-			c = (BYTE)p[si++];
-			if (c != '.' || si >= 3) break;
-			sfn[i++] = c;
-		}
-		if (c != '/' && c != '\\' && c > ' ') return FR_INVALID_NAME;
-		*path = &p[si];									/* Return pointer to the next segment */
-		sfn[NS] = (c <= ' ') ? NS_LAST | NS_DOT : NS_DOT;	/* Set last segment flag if end of path */
-		return FR_OK;
-	}
-#endif
-	for (;;) {
-		c = (BYTE)p[si++];
-		if (c <= ' ' || c == '/' || c == '\\') break;	/* Break on end of segment */
-		if (c == '.' || i >= ni) {
-			if (ni != 8 || c != '.') return FR_INVALID_NAME;
-			i = 8; ni = 11;
-			b <<= 2; continue;
-		}
-		if (c >= 0x80) {				/* Extended char? */
-			b |= 3;						/* Eliminate NT flag */
-#ifdef _EXCVT
-			c = excvt[c - 0x80];		/* Upper conversion (SBCS) */
-#else
-#if !_DF1S	/* ASCII only cfg */
-			return FR_INVALID_NAME;
-#endif
-#endif
-		}
-		if (IsDBCS1(c)) {				/* Check if it is a DBC 1st byte (always false on SBCS cfg) */
-			d = (BYTE)p[si++];			/* Get 2nd byte */
-			if (!IsDBCS2(d) || i >= ni - 1)	/* Reject invalid DBC */
-				return FR_INVALID_NAME;
-			sfn[i++] = c;
-			sfn[i++] = d;
-		} else {						/* Single byte code */
-			if (chk_chr("\"*+,:;<=>\?[]|\x7F", c))	/* Reject illegal chrs for SFN */
-				return FR_INVALID_NAME;
-			if (IsUpper(c)) {			/* ASCII large capital? */
-				b |= 2;
-			} else {
-				if (IsLower(c)) {		/* ASCII small capital? */
-					b |= 1; c -= 0x20;
-				}
-			}
-			sfn[i++] = c;
-		}
-	}
-	*path = &p[si];						/* Return pointer to the next segment */
-	c = (c <= ' ') ? NS_LAST : 0;		/* Set last segment flag if end of path */
-
-	if (!i) return FR_INVALID_NAME;		/* Reject nul string */
-	if (sfn[0] == DDE) sfn[0] = NDDE;	/* When first char collides with DDE, replace it with 0x05 */
-
-	if (ni == 8) b <<= 2;
-	if ((b & 0x03) == 0x01) c |= NS_EXT;	/* NT flag (Name extension has only small capital) */
-	if ((b & 0x0C) == 0x04) c |= NS_BODY;	/* NT flag (Name body has only small capital) */
-
-	sfn[NS] = c;		/* Store NT flag, File name is created */
-
-	return FR_OK;
-#endif
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Get file information from directory entry                             */
-/*-----------------------------------------------------------------------*/
-#if _FS_MINIMIZE <= 1
-static
-void get_fileinfo (		/* No return code */
-	DIR *dj,			/* Pointer to the directory object */
-	FILINFO *fno	 	/* Pointer to the file information to be filled */
-)
-{
-	UINT i;
-	BYTE nt, *dir;
-	TCHAR *p, c;
-
-
-	p = fno->fname;
-	if (dj->sect) {
-		dir = dj->dir;
-		nt = dir[DIR_NTres];		/* NT flag */
-		for (i = 0; i < 8; i++) {	/* Copy name body */
-			c = dir[i];
-			if (c == ' ') break;
-			if (c == NDDE) c = (TCHAR)DDE;
-			if (_USE_LFN && (nt & NS_BODY) && IsUpper(c)) c += 0x20;
-#if _LFN_UNICODE
-			if (IsDBCS1(c) && i < 7 && IsDBCS2(dir[i+1]))
-				c = (c << 8) | dir[++i];
-			c = ff_convert(c, 1);
-			if (!c) c = '?';
-#endif
-			*p++ = c;
-		}
-		if (dir[8] != ' ') {		/* Copy name extension */
-			*p++ = '.';
-			for (i = 8; i < 11; i++) {
-				c = dir[i];
-				if (c == ' ') break;
-				if (_USE_LFN && (nt & NS_EXT) && IsUpper(c)) c += 0x20;
-#if _LFN_UNICODE
-				if (IsDBCS1(c) && i < 10 && IsDBCS2(dir[i+1]))
-					c = (c << 8) | dir[++i];
-				c = ff_convert(c, 1);
-				if (!c) c = '?';
-#endif
-				*p++ = c;
-			}
-		}
-		fno->fattrib = dir[DIR_Attr];				/* Attribute */
-		fno->fsize = LD_DWORD(dir+DIR_FileSize);	/* Size */
-		fno->fdate = LD_WORD(dir+DIR_WrtDate);		/* Date */
-		fno->ftime = LD_WORD(dir+DIR_WrtTime);		/* Time */
-	}
-	*p = 0;		/* Terminate SFN str by a \0 */
-
-#if _USE_LFN
-	if (fno->lfname && fno->lfsize) {
-		TCHAR *tp = fno->lfname;
-		WCHAR w, *lfn;
-
-		i = 0;
-		if (dj->sect && dj->lfn_idx != 0xFFFF) {/* Get LFN if available */
-			lfn = dj->lfn;
-			while ((w = *lfn++) != 0) {			/* Get an LFN char */
-#if !_LFN_UNICODE
-				w = ff_convert(w, 0);			/* Unicode -> OEM conversion */
-				if (!w) { i = 0; break; }		/* Could not convert, no LFN */
-				if (_DF1S && w >= 0x100)		/* Put 1st byte if it is a DBC (always false on SBCS cfg) */
-					tp[i++] = (TCHAR)(w >> 8);
-#endif
-				if (i >= fno->lfsize - 1) { i = 0; break; }	/* Buffer overflow, no LFN */
-				tp[i++] = (TCHAR)w;
-			}
-		}
-		tp[i] = 0;	/* Terminate the LFN str by a \0 */
-	}
-#endif
-}
-#endif /* _FS_MINIMIZE <= 1 */
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Follow a file path                                                    */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT follow_path (	/* FR_OK(0): successful, !=0: error code */
-	DIR *dj,			/* Directory object to return last directory and found object */
-	const TCHAR *path	/* Full-path string to find a file or directory */
-)
-{
-	FRESULT res;
-	BYTE *dir, ns;
-
-
-#if _FS_RPATH
-	if (*path == '/' || *path == '\\') { /* There is a heading separator */
-		path++;	dj->sclust = 0;		/* Strip it and start from the root dir */
-	} else {							/* No heading separator */
-		dj->sclust = dj->fs->cdir;	/* Start from the current dir */
-	}
-#else
-	if (*path == '/' || *path == '\\')	/* Strip heading separator if exist */
-		path++;
-	dj->sclust = 0;						/* Start from the root dir */
-#endif
-
-	if ((UINT)*path < ' ') {			/* Nul path means the start directory itself */
-		res = dir_sdi(dj, 0);
-		dj->dir = 0;
-	} else {							/* Follow path */
-		for (;;) {
-			res = create_name(dj, &path);	/* Get a segment */
-			if (res != FR_OK) break;
-			res = dir_find(dj);				/* Find it */
-			ns = *(dj->fn+NS);
-			if (res != FR_OK) {				/* Failed to find the object */
-				if (res != FR_NO_FILE) break;	/* Abort if any hard error occurred */
-				/* Object not found */
-				if (_FS_RPATH && (ns & NS_DOT)) {	/* If dot entry is not exit */
-					dj->sclust = 0; dj->dir = 0;	/* It is the root dir */
-					res = FR_OK;
-					if (!(ns & NS_LAST)) continue;
-				} else {							/* Could not find the object */
-					if (!(ns & NS_LAST)) res = FR_NO_PATH;
-				}
-				break;
-			}
-			if (ns & NS_LAST) break;			/* Last segment match. Function completed. */
-			dir = dj->dir;						/* There is next segment. Follow the sub directory */
-			if (!(dir[DIR_Attr] & AM_DIR)) {	/* Cannot follow because it is a file */
-				res = FR_NO_PATH; break;
-			}
-			dj->sclust = ld_clust(dj->fs, dir);
-		}
-	}
-
-	return res;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Load a sector and check if it is an FAT Volume Boot Record            */
-/*-----------------------------------------------------------------------*/
-
-static
-BYTE check_fs (	/* 0:FAT-VBR, 1:Any BR but not FAT, 2:Not a BR, 3:Disk error */
-	FATFS *fs,	/* File system object */
-	DWORD sect	/* Sector# (lba) to check if it is an FAT boot record or not */
-)
-{
-	if (disk_read(fs->drv, fs->win, sect, 1) != RES_OK)	/* Load boot record */
-		return 3;
-	if (LD_WORD(&fs->win[BS_55AA]) != 0xAA55)		/* Check record signature (always placed at offset 510 even if the sector size is >512) */
-		return 2;
-
-	if ((LD_DWORD(&fs->win[BS_FilSysType]) & 0xFFFFFF) == 0x544146)	/* Check "FAT" string */
-		return 0;
-	if ((LD_DWORD(&fs->win[BS_FilSysType32]) & 0xFFFFFF) == 0x544146)
-		return 0;
-
-	return 1;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Check if the file system object is valid or not                       */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT chk_mounted (	/* FR_OK(0): successful, !=0: any error occurred */
-	const TCHAR **path,	/* Pointer to pointer to the path name (drive number) */
-	FATFS **rfs,		/* Pointer to pointer to the found file system object */
-	BYTE wmode			/* !=0: Check write protection for write access */
-)
-{
-	BYTE fmt, b, pi, *tbl;
-	UINT vol;
-	DSTATUS stat;
-	DWORD bsect, fasize, tsect, sysect, nclst, szbfat;
-	WORD nrsv;
-	const TCHAR *p = *path;
-	FATFS *fs;
-
-
-	/* Get logical drive number from the path name */
-	vol = p[0] - '0';					/* Is there a drive number? */
-	if (vol <= 9 && p[1] == ':') {		/* Found a drive number, get and strip it */
-		p += 2; *path = p;				/* Return pointer to the path name */
-	} else {							/* No drive number is given */
-#if _FS_RPATH
-		vol = CurrVol;					/* Use current drive */
-#else
-		vol = 0;						/* Use drive 0 */
-#endif
-	}
-
-	/* Check if the file system object is valid or not */
-	*rfs = 0;
-	if (vol >= _VOLUMES) 				/* Is the drive number valid? */
-		return FR_INVALID_DRIVE;
-	fs = FatFs[vol];					/* Get corresponding file system object */
-	if (!fs) return FR_NOT_ENABLED;		/* Is the file system object available? */
-
-	ENTER_FF(fs);						/* Lock file system */
-
-	*rfs = fs;							/* Return pointer to the corresponding file system object */
-	if (fs->fs_type) {					/* If the volume has been mounted */
-		stat = disk_status(fs->drv);
-		if (!(stat & STA_NOINIT)) {		/* and the physical drive is kept initialized (has not been changed), */
-			if (!_FS_READONLY && wmode && (stat & STA_PROTECT))	/* Check write protection if needed */
-				return FR_WRITE_PROTECTED;
-			return FR_OK;				/* The file system object is valid */
-		}
-	}
-
-	/* The file system object is not valid. */
-	/* Following code attempts to mount the volume. (analyze BPB and initialize the fs object) */
-
-	fs->fs_type = 0;					/* Clear the file system object */
-	fs->drv = LD2PD(vol);				/* Bind the logical drive and a physical drive */
-	stat = disk_initialize(fs->drv);	/* Initialize the physical drive */
-	if (stat & STA_NOINIT)				/* Check if the initialization succeeded */
-		return FR_NOT_READY;			/* Failed to initialize due to no medium or hard error */
-	if (!_FS_READONLY && wmode && (stat & STA_PROTECT))	/* Check disk write protection if needed */
-		return FR_WRITE_PROTECTED;
-#if _MAX_SS != 512						/* Get disk sector size (variable sector size cfg only) */
-	if (disk_ioctl(fs->drv, GET_SECTOR_SIZE, &fs->ssize) != RES_OK)
-		return FR_DISK_ERR;
-#endif
-	/* Search FAT partition on the drive. Supports only generic partitions, FDISK and SFD. */
-	fmt = check_fs(fs, bsect = 0);		/* Load sector 0 and check if it is an FAT-VBR (in SFD) */
-	if (LD2PT(vol) && !fmt) fmt = 1;	/* Force non-SFD if the volume is forced partition */
-	if (fmt == 1) {						/* Not an FAT-VBR, the physical drive can be partitioned */
-		/* Check the partition listed in the partition table */
-		pi = LD2PT(vol);
-		if (pi) pi--;
-		tbl = &fs->win[MBR_Table + pi * SZ_PTE];/* Partition table */
-		if (tbl[4]) {						/* Is the partition existing? */
-			bsect = LD_DWORD(&tbl[8]);		/* Partition offset in LBA */
-			fmt = check_fs(fs, bsect);		/* Check the partition */
-		}
-	}
-	if (fmt == 3) return FR_DISK_ERR;
-	if (fmt) return FR_NO_FILESYSTEM;		/* No FAT volume is found */
-
-	/* An FAT volume is found. Following code initializes the file system object */
-
-	if (LD_WORD(fs->win+BPB_BytsPerSec) != SS(fs))		/* (BPB_BytsPerSec must be equal to the physical sector size) */
-		return FR_NO_FILESYSTEM;
-
-	fasize = LD_WORD(fs->win+BPB_FATSz16);				/* Number of sectors per FAT */
-	if (!fasize) fasize = LD_DWORD(fs->win+BPB_FATSz32);
-	fs->fsize = fasize;
-
-	fs->n_fats = b = fs->win[BPB_NumFATs];				/* Number of FAT copies */
-	if (b != 1 && b != 2) return FR_NO_FILESYSTEM;		/* (Must be 1 or 2) */
-	fasize *= b;										/* Number of sectors for FAT area */
-
-	fs->csize = b = fs->win[BPB_SecPerClus];			/* Number of sectors per cluster */
-	if (!b || (b & (b - 1))) return FR_NO_FILESYSTEM;	/* (Must be power of 2) */
-
-	fs->n_rootdir = LD_WORD(fs->win+BPB_RootEntCnt);	/* Number of root directory entries */
-	if (fs->n_rootdir % (SS(fs) / SZ_DIR)) return FR_NO_FILESYSTEM;	/* (BPB_RootEntCnt must be sector aligned) */
-
-	tsect = LD_WORD(fs->win+BPB_TotSec16);				/* Number of sectors on the volume */
-	if (!tsect) tsect = LD_DWORD(fs->win+BPB_TotSec32);
-
-	nrsv = LD_WORD(fs->win+BPB_RsvdSecCnt);				/* Number of reserved sectors */
-	if (!nrsv) return FR_NO_FILESYSTEM;					/* (BPB_RsvdSecCnt must not be 0) */
-
-	/* Determine the FAT sub type */
-	sysect = nrsv + fasize + fs->n_rootdir / (SS(fs) / SZ_DIR);	/* RSV+FAT+DIR */
-	if (tsect < sysect) return FR_NO_FILESYSTEM;		/* (Invalid volume size) */
-	nclst = (tsect - sysect) / fs->csize;				/* Number of clusters */
-	if (!nclst) return FR_NO_FILESYSTEM;				/* (Invalid volume size) */
-	fmt = FS_FAT12;
-	if (nclst >= MIN_FAT16) fmt = FS_FAT16;
-	if (nclst >= MIN_FAT32) fmt = FS_FAT32;
-
-	/* Boundaries and Limits */
-	fs->n_fatent = nclst + 2;							/* Number of FAT entries */
-	fs->database = bsect + sysect;						/* Data start sector */
-	fs->fatbase = bsect + nrsv; 						/* FAT start sector */
-	if (fmt == FS_FAT32) {
-		if (fs->n_rootdir) return FR_NO_FILESYSTEM;		/* (BPB_RootEntCnt must be 0) */
-		fs->dirbase = LD_DWORD(fs->win+BPB_RootClus);	/* Root directory start cluster */
-		szbfat = fs->n_fatent * 4;						/* (Required FAT size) */
-	} else {
-		if (!fs->n_rootdir)	return FR_NO_FILESYSTEM;	/* (BPB_RootEntCnt must not be 0) */
-		fs->dirbase = fs->fatbase + fasize;				/* Root directory start sector */
-		szbfat = (fmt == FS_FAT16) ?					/* (Required FAT size) */
-			fs->n_fatent * 2 : fs->n_fatent * 3 / 2 + (fs->n_fatent & 1);
-	}
-	if (fs->fsize < (szbfat + (SS(fs) - 1)) / SS(fs))	/* (BPB_FATSz must not be less than required) */
-		return FR_NO_FILESYSTEM;
-
-#if !_FS_READONLY
-	/* Initialize cluster allocation information */
-	fs->free_clust = 0xFFFFFFFF;
-	fs->last_clust = 0;
-
-	/* Get fsinfo if available */
-	if (fmt == FS_FAT32) {
-	 	fs->fsi_flag = 0;
-		fs->fsi_sector = bsect + LD_WORD(fs->win+BPB_FSInfo);
-		if (disk_read(fs->drv, fs->win, fs->fsi_sector, 1) == RES_OK &&
-			LD_WORD(fs->win+BS_55AA) == 0xAA55 &&
-			LD_DWORD(fs->win+FSI_LeadSig) == 0x41615252 &&
-			LD_DWORD(fs->win+FSI_StrucSig) == 0x61417272) {
-				fs->last_clust = LD_DWORD(fs->win+FSI_Nxt_Free);
-				fs->free_clust = LD_DWORD(fs->win+FSI_Free_Count);
-		}
-	}
-#endif
-	fs->fs_type = fmt;		/* FAT sub-type */
-	fs->id = ++Fsid;		/* File system mount ID */
-	fs->winsect = 0;		/* Invalidate sector cache */
-	fs->wflag = 0;
-#if _FS_RPATH
-	fs->cdir = 0;			/* Current directory (root dir) */
-#endif
-#if _FS_LOCK				/* Clear file lock semaphores */
-	clear_lock(fs);
-#endif
-
-	return FR_OK;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Check if the file/dir object is valid or not                          */
-/*-----------------------------------------------------------------------*/
-
-static
-FRESULT validate (	/* FR_OK(0): The object is valid, !=0: Invalid */
-	void* obj		/* Pointer to the object FIL/DIR to check validity */
-)
-{
-	FIL *fil;
-
-
-	fil = (FIL*)obj;	/* Assuming offset of fs and id in the FIL/DIR is identical */
-	if (!fil->fs || !fil->fs->fs_type || fil->fs->id != fil->id)
-		return FR_INVALID_OBJECT;
-
-	ENTER_FF(fil->fs);		/* Lock file system */
-
-	if (disk_status(fil->fs->drv) & STA_NOINIT)
-		return FR_NOT_READY;
-
-	return FR_OK;
-}
-
-
-
-
-/*--------------------------------------------------------------------------
-
-   Public Functions
-
---------------------------------------------------------------------------*/
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Mount/Unmount a Logical Drive                                         */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_mount (
-	BYTE vol,		/* Logical drive number to be mounted/unmounted */
-	FATFS *fs		/* Pointer to new file system object (NULL for unmount)*/
-)
-{
-	FATFS *rfs;
-
-
-	if (vol >= _VOLUMES)		/* Check if the drive number is valid */
-		return FR_INVALID_DRIVE;
-	rfs = FatFs[vol];			/* Get current fs object */
-
-	if (rfs) {
-#if _FS_LOCK
-		clear_lock(rfs);
-#endif
-#if _FS_REENTRANT				/* Discard sync object of the current volume */
-		if (!ff_del_syncobj(rfs->sobj)) return FR_INT_ERR;
-#endif
-		rfs->fs_type = 0;		/* Clear old fs object */
-	}
-
-	if (fs) {
-		fs->fs_type = 0;		/* Clear new fs object */
-#if _FS_REENTRANT				/* Create sync object for the new volume */
-		if (!ff_cre_syncobj(vol, &fs->sobj)) return FR_INT_ERR;
-#endif
-	}
-	FatFs[vol] = fs;			/* Register new fs object */
-
-	return FR_OK;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Open or Create a File                                                 */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_open (
-	FIL *fp,			/* Pointer to the blank file object */
-	const TCHAR *path,	/* Pointer to the file name */
-	BYTE mode			/* Access mode and file open mode flags */
-)
-{
-	FRESULT res;
-	DIR dj;
-	BYTE *dir;
-	DEF_NAMEBUF;
-
-
-	if (!fp) return FR_INVALID_OBJECT;
-	fp->fs = 0;			/* Clear file object */
-
-#if !_FS_READONLY
-	mode &= FA_READ | FA_WRITE | FA_CREATE_ALWAYS | FA_OPEN_ALWAYS | FA_CREATE_NEW;
-	res = chk_mounted(&path, &dj.fs, (BYTE)(mode & ~FA_READ));
-#else
-	mode &= FA_READ;
-	res = chk_mounted(&path, &dj.fs, 0);
-#endif
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		res = follow_path(&dj, path);	/* Follow the file path */
-		dir = dj.dir;
-#if !_FS_READONLY	/* R/W configuration */
-		if (res == FR_OK) {
-			if (!dir)	/* Current dir itself */
-				res = FR_INVALID_NAME;
-#if _FS_LOCK
-			else
-				res = chk_lock(&dj, (mode & ~FA_READ) ? 1 : 0);
-#endif
-		}
-		/* Create or Open a file */
-		if (mode & (FA_CREATE_ALWAYS | FA_OPEN_ALWAYS | FA_CREATE_NEW)) {
-			DWORD dw, cl;
-
-			if (res != FR_OK) {					/* No file, create new */
-				if (res == FR_NO_FILE)			/* There is no file to open, create a new entry */
-#if _FS_LOCK
-					res = enq_lock() ? dir_register(&dj) : FR_TOO_MANY_OPEN_FILES;
-#else
-					res = dir_register(&dj);
-#endif
-				mode |= FA_CREATE_ALWAYS;		/* File is created */
-				dir = dj.dir;					/* New entry */
-			}
-			else {								/* Any object is already existing */
-				if (dir[DIR_Attr] & (AM_RDO | AM_DIR)) {	/* Cannot overwrite it (R/O or DIR) */
-					res = FR_DENIED;
-				} else {
-					if (mode & FA_CREATE_NEW)	/* Cannot create as new file */
-						res = FR_EXIST;
-				}
-			}
-			if (res == FR_OK && (mode & FA_CREATE_ALWAYS)) {	/* Truncate it if overwrite mode */
-				dw = get_fattime();					/* Created time */
-				ST_DWORD(dir+DIR_CrtTime, dw);
-				dir[DIR_Attr] = 0;					/* Reset attribute */
-				ST_DWORD(dir+DIR_FileSize, 0);		/* size = 0 */
-				cl = ld_clust(dj.fs, dir);			/* Get start cluster */
-				st_clust(dir, 0);					/* cluster = 0 */
-				dj.fs->wflag = 1;
-				if (cl) {							/* Remove the cluster chain if exist */
-					dw = dj.fs->winsect;
-					res = remove_chain(dj.fs, cl);
-					if (res == FR_OK) {
-						dj.fs->last_clust = cl - 1;	/* Reuse the cluster hole */
-						res = move_window(dj.fs, dw);
-					}
-				}
-			}
-		}
-		else {	/* Open an existing file */
-			if (res == FR_OK) {						/* Follow succeeded */
-				if (dir[DIR_Attr] & AM_DIR) {		/* It is a directory */
-					res = FR_NO_FILE;
-				} else {
-					if ((mode & FA_WRITE) && (dir[DIR_Attr] & AM_RDO)) /* R/O violation */
-						res = FR_DENIED;
-				}
-			}
-		}
-		if (res == FR_OK) {
-			if (mode & FA_CREATE_ALWAYS)			/* Set file change flag if created or overwritten */
-				mode |= FA__WRITTEN;
-			fp->dir_sect = dj.fs->winsect;			/* Pointer to the directory entry */
-			fp->dir_ptr = dir;
-#if _FS_LOCK
-			fp->lockid = inc_lock(&dj, (mode & ~FA_READ) ? 1 : 0);
-			if (!fp->lockid) res = FR_INT_ERR;
-#endif
-		}
-
-#else				/* R/O configuration */
-		if (res == FR_OK) {					/* Follow succeeded */
-			dir = dj.dir;
-			if (!dir) {						/* Current dir itself */
-				res = FR_INVALID_NAME;
-			} else {
-				if (dir[DIR_Attr] & AM_DIR)	/* It is a directory */
-					res = FR_NO_FILE;
-			}
-		}
-#endif
-		FREE_BUF();
-
-		if (res == FR_OK) {
-			fp->flag = mode;					/* File access mode */
-			fp->sclust = ld_clust(dj.fs, dir);	/* File start cluster */
-			fp->fsize = LD_DWORD(dir+DIR_FileSize);	/* File size */
-			fp->fptr = 0;						/* File pointer */
-			fp->dsect = 0;
-#if _USE_FASTSEEK
-			fp->cltbl = 0;						/* Normal seek mode */
-#endif
-			fp->fs = dj.fs; fp->id = dj.fs->id;	/* Validate file object */
-		}
-	}
-
-	LEAVE_FF(dj.fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Read File                                                             */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_read (
-	FIL *fp, 		/* Pointer to the file object */
-	void *buff,		/* Pointer to data buffer */
-	UINT btr,		/* Number of bytes to read */
-	UINT *br		/* Pointer to number of bytes read */
-)
-{
-	FRESULT res;
-	DWORD clst, sect, remain;
-	UINT rcnt, cc;
-	BYTE csect, *rbuff = buff;
-
-
-	*br = 0;	/* Clear read byte counter */
-
-	res = validate(fp);							/* Check validity */
-	if (res != FR_OK) LEAVE_FF(fp->fs, res);
-	if (fp->flag & FA__ERROR)					/* Aborted file? */
-		LEAVE_FF(fp->fs, FR_INT_ERR);
-	if (!(fp->flag & FA_READ)) 					/* Check access mode */
-		LEAVE_FF(fp->fs, FR_DENIED);
-	remain = fp->fsize - fp->fptr;
-	if (btr > remain) btr = (UINT)remain;		/* Truncate btr by remaining bytes */
-
-	for ( ;  btr;								/* Repeat until all data read */
-		rbuff += rcnt, fp->fptr += rcnt, *br += rcnt, btr -= rcnt) {
-		if ((fp->fptr % SS(fp->fs)) == 0) {		/* On the sector boundary? */
-			csect = (BYTE)(fp->fptr / SS(fp->fs) & (fp->fs->csize - 1));	/* Sector offset in the cluster */
-			if (!csect) {						/* On the cluster boundary? */
-				if (fp->fptr == 0) {			/* On the top of the file? */
-					clst = fp->sclust;			/* Follow from the origin */
-				} else {						/* Middle or end of the file */
-#if _USE_FASTSEEK
-					if (fp->cltbl)
-						clst = clmt_clust(fp, fp->fptr);	/* Get cluster# from the CLMT */
-					else
-#endif
-						clst = get_fat(fp->fs, fp->clust);	/* Follow cluster chain on the FAT */
-				}
-				if (clst < 2) ABORT(fp->fs, FR_INT_ERR);
-				if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
-				fp->clust = clst;				/* Update current cluster */
-			}
-			sect = clust2sect(fp->fs, fp->clust);	/* Get current sector */
-			if (!sect) ABORT(fp->fs, FR_INT_ERR);
-			sect += csect;
-			cc = btr / SS(fp->fs);				/* When remaining bytes >= sector size, */
-			if (cc) {							/* Read maximum contiguous sectors directly */
-				if (csect + cc > fp->fs->csize)	/* Clip at cluster boundary */
-					cc = fp->fs->csize - csect;
-				if (disk_read(fp->fs->drv, rbuff, sect, (BYTE)cc) != RES_OK)
-					ABORT(fp->fs, FR_DISK_ERR);
-#if !_FS_READONLY && _FS_MINIMIZE <= 2			/* Replace one of the read sectors with cached data if it contains a dirty sector */
-#if _FS_TINY
-				if (fp->fs->wflag && fp->fs->winsect - sect < cc)
-					mem_cpy(rbuff + ((fp->fs->winsect - sect) * SS(fp->fs)), fp->fs->win, SS(fp->fs));
-#else
-				if ((fp->flag & FA__DIRTY) && fp->dsect - sect < cc)
-					mem_cpy(rbuff + ((fp->dsect - sect) * SS(fp->fs)), fp->buf, SS(fp->fs));
-#endif
-#endif
-				rcnt = SS(fp->fs) * cc;			/* Number of bytes transferred */
-				continue;
-			}
-#if !_FS_TINY
-			if (fp->dsect != sect) {			/* Load data sector if not in cache */
-#if !_FS_READONLY
-				if (fp->flag & FA__DIRTY) {		/* Write-back dirty sector cache */
-					if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
-						ABORT(fp->fs, FR_DISK_ERR);
-					fp->flag &= ~FA__DIRTY;
-				}
-#endif
-				if (disk_read(fp->fs->drv, fp->buf, sect, 1) != RES_OK)	/* Fill sector cache */
-					ABORT(fp->fs, FR_DISK_ERR);
-			}
-#endif
-			fp->dsect = sect;
-		}
-		rcnt = SS(fp->fs) - ((UINT)fp->fptr % SS(fp->fs));	/* Get partial sector data from sector buffer */
-		if (rcnt > btr) rcnt = btr;
-#if _FS_TINY
-		if (move_window(fp->fs, fp->dsect))		/* Move sector window */
-			ABORT(fp->fs, FR_DISK_ERR);
-		mem_cpy(rbuff, &fp->fs->win[fp->fptr % SS(fp->fs)], rcnt);	/* Pick partial sector */
-#else
-		mem_cpy(rbuff, &fp->buf[fp->fptr % SS(fp->fs)], rcnt);	/* Pick partial sector */
-#endif
-	}
-
-	LEAVE_FF(fp->fs, FR_OK);
-}
-
-
-
-
-#if !_FS_READONLY
-/*-----------------------------------------------------------------------*/
-/* Write File                                                            */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_write (
-	FIL *fp,			/* Pointer to the file object */
-	const void *buff,	/* Pointer to the data to be written */
-	UINT btw,			/* Number of bytes to write */
-	UINT *bw			/* Pointer to number of bytes written */
-)
-{
-	FRESULT res;
-	DWORD clst, sect;
-	UINT wcnt, cc;
-	const BYTE *wbuff = buff;
-	BYTE csect;
-
-
-	*bw = 0;	/* Clear write byte counter */
-
-	res = validate(fp);						/* Check validity */
-	if (res != FR_OK) LEAVE_FF(fp->fs, res);
-	if (fp->flag & FA__ERROR)				/* Aborted file? */
-		LEAVE_FF(fp->fs, FR_INT_ERR);
-	if (!(fp->flag & FA_WRITE))				/* Check access mode */
-		LEAVE_FF(fp->fs, FR_DENIED);
-	if ((DWORD)(fp->fsize + btw) < fp->fsize) btw = 0;	/* File size cannot reach 4GB */
-
-	for ( ;  btw;							/* Repeat until all data written */
-		wbuff += wcnt, fp->fptr += wcnt, *bw += wcnt, btw -= wcnt) {
-		if ((fp->fptr % SS(fp->fs)) == 0) {	/* On the sector boundary? */
-			csect = (BYTE)(fp->fptr / SS(fp->fs) & (fp->fs->csize - 1));	/* Sector offset in the cluster */
-			if (!csect) {					/* On the cluster boundary? */
-				if (fp->fptr == 0) {		/* On the top of the file? */
-					clst = fp->sclust;		/* Follow from the origin */
-					if (clst == 0)			/* When no cluster is allocated, */
-						fp->sclust = clst = create_chain(fp->fs, 0);	/* Create a new cluster chain */
-				} else {					/* Middle or end of the file */
-#if _USE_FASTSEEK
-					if (fp->cltbl)
-						clst = clmt_clust(fp, fp->fptr);	/* Get cluster# from the CLMT */
-					else
-#endif
-						clst = create_chain(fp->fs, fp->clust);	/* Follow or stretch cluster chain on the FAT */
-				}
-				if (clst == 0) break;		/* Could not allocate a new cluster (disk full) */
-				if (clst == 1) ABORT(fp->fs, FR_INT_ERR);
-				if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
-				fp->clust = clst;			/* Update current cluster */
-			}
-#if _FS_TINY
-			if (fp->fs->winsect == fp->dsect && move_window(fp->fs, 0))	/* Write-back sector cache */
-				ABORT(fp->fs, FR_DISK_ERR);
-#else
-			if (fp->flag & FA__DIRTY) {		/* Write-back sector cache */
-				if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
-					ABORT(fp->fs, FR_DISK_ERR);
-				fp->flag &= ~FA__DIRTY;
-			}
-#endif
-			sect = clust2sect(fp->fs, fp->clust);	/* Get current sector */
-			if (!sect) ABORT(fp->fs, FR_INT_ERR);
-			sect += csect;
-			cc = btw / SS(fp->fs);			/* When remaining bytes >= sector size, */
-			if (cc) {						/* Write maximum contiguous sectors directly */
-				if (csect + cc > fp->fs->csize)	/* Clip at cluster boundary */
-					cc = fp->fs->csize - csect;
-				if (disk_write(fp->fs->drv, wbuff, sect, (BYTE)cc) != RES_OK)
-					ABORT(fp->fs, FR_DISK_ERR);
-#if _FS_TINY
-				if (fp->fs->winsect - sect < cc) {	/* Refill sector cache if it gets invalidated by the direct write */
-					mem_cpy(fp->fs->win, wbuff + ((fp->fs->winsect - sect) * SS(fp->fs)), SS(fp->fs));
-					fp->fs->wflag = 0;
-				}
-#else
-				if (fp->dsect - sect < cc) { /* Refill sector cache if it gets invalidated by the direct write */
-					mem_cpy(fp->buf, wbuff + ((fp->dsect - sect) * SS(fp->fs)), SS(fp->fs));
-					fp->flag &= ~FA__DIRTY;
-				}
-#endif
-				wcnt = SS(fp->fs) * cc;		/* Number of bytes transferred */
-				continue;
-			}
-#if _FS_TINY
-			if (fp->fptr >= fp->fsize) {	/* Avoid silly cache filling at growing edge */
-				if (move_window(fp->fs, 0)) ABORT(fp->fs, FR_DISK_ERR);
-				fp->fs->winsect = sect;
-			}
-#else
-			if (fp->dsect != sect) {		/* Fill sector cache with file data */
-				if (fp->fptr < fp->fsize &&
-					disk_read(fp->fs->drv, fp->buf, sect, 1) != RES_OK)
-						ABORT(fp->fs, FR_DISK_ERR);
-			}
-#endif
-			fp->dsect = sect;
-		}
-		wcnt = SS(fp->fs) - ((UINT)fp->fptr % SS(fp->fs));/* Put partial sector into file I/O buffer */
-		if (wcnt > btw) wcnt = btw;
-#if _FS_TINY
-		if (move_window(fp->fs, fp->dsect))	/* Move sector window */
-			ABORT(fp->fs, FR_DISK_ERR);
-		mem_cpy(&fp->fs->win[fp->fptr % SS(fp->fs)], wbuff, wcnt);	/* Fit partial sector */
-		fp->fs->wflag = 1;
-#else
-		mem_cpy(&fp->buf[fp->fptr % SS(fp->fs)], wbuff, wcnt);	/* Fit partial sector */
-		fp->flag |= FA__DIRTY;
-#endif
-	}
-
-	if (fp->fptr > fp->fsize) fp->fsize = fp->fptr;	/* Update file size if needed */
-	fp->flag |= FA__WRITTEN;						/* Set file change flag */
-
-	LEAVE_FF(fp->fs, FR_OK);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Synchronize the File Object                                           */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_sync (
-	FIL *fp		/* Pointer to the file object */
-)
-{
-	FRESULT res;
-	DWORD tim;
-	BYTE *dir;
-
-
-	res = validate(fp);					/* Check validity of the object */
-	if (res == FR_OK) {
-		if (fp->flag & FA__WRITTEN) {	/* Has the file been written? */
-#if !_FS_TINY	/* Write-back dirty buffer */
-			if (fp->flag & FA__DIRTY) {
-				if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
-					LEAVE_FF(fp->fs, FR_DISK_ERR);
-				fp->flag &= ~FA__DIRTY;
-			}
-#endif
-			/* Update the directory entry */
-			res = move_window(fp->fs, fp->dir_sect);
-			if (res == FR_OK) {
-				dir = fp->dir_ptr;
-				dir[DIR_Attr] |= AM_ARC;					/* Set archive bit */
-				ST_DWORD(dir+DIR_FileSize, fp->fsize);		/* Update file size */
-				st_clust(dir, fp->sclust);					/* Update start cluster */
-				tim = get_fattime();						/* Update updated time */
-				ST_DWORD(dir+DIR_WrtTime, tim);
-				ST_WORD(dir+DIR_LstAccDate, 0);
-				fp->flag &= ~FA__WRITTEN;
-				fp->fs->wflag = 1;
-				res = sync(fp->fs);
-			}
-		}
-	}
-
-	LEAVE_FF(fp->fs, res);
-}
-
-#endif /* !_FS_READONLY */
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Close File                                                            */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_close (
-	FIL *fp		/* Pointer to the file object to be closed */
-)
-{
-	FRESULT res;
-
-
-#if _FS_READONLY
-	res = validate(fp);
-	{
-#if _FS_REENTRANT
-		FATFS *fs = fp->fs;
-#endif
-		if (res == FR_OK) fp->fs = 0;	/* Discard file object */
-		LEAVE_FF(fs, res);
-	}
-#else
-	res = f_sync(fp);		/* Flush cached data */
-#if _FS_LOCK
-	if (res == FR_OK) {		/* Decrement open counter */
-#if _FS_REENTRANT
-		FATFS *fs = fp->fs;;
-		res = validate(fp);
-		if (res == FR_OK) {
-			res = dec_lock(fp->lockid);	
-			unlock_fs(fs, FR_OK);
-		}
-#else
-		res = dec_lock(fp->lockid);
-#endif
-	}
-#endif
-	if (res == FR_OK) fp->fs = 0;	/* Discard file object */
-	return res;
-#endif
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Current Drive/Directory Handlings                                     */
-/*-----------------------------------------------------------------------*/
-
-#if _FS_RPATH >= 1
-
-FRESULT f_chdrive (
-	BYTE drv		/* Drive number */
-)
-{
-	if (drv >= _VOLUMES) return FR_INVALID_DRIVE;
-
-	CurrVol = drv;
-
-	return FR_OK;
-}
-
-
-
-FRESULT f_chdir (
-	const TCHAR *path	/* Pointer to the directory path */
-)
-{
-	FRESULT res;
-	DIR dj;
-	DEF_NAMEBUF;
-
-
-	res = chk_mounted(&path, &dj.fs, 0);
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		res = follow_path(&dj, path);		/* Follow the path */
-		FREE_BUF();
-		if (res == FR_OK) {					/* Follow completed */
-			if (!dj.dir) {
-				dj.fs->cdir = dj.sclust;	/* Start directory itself */
-			} else {
-				if (dj.dir[DIR_Attr] & AM_DIR)	/* Reached to the directory */
-					dj.fs->cdir = ld_clust(dj.fs, dj.dir);
-				else
-					res = FR_NO_PATH;		/* Reached but a file */
-			}
-		}
-		if (res == FR_NO_FILE) res = FR_NO_PATH;
-	}
-
-	LEAVE_FF(dj.fs, res);
-}
-
-
-#if _FS_RPATH >= 2
-FRESULT f_getcwd (
-	TCHAR *path,	/* Pointer to the directory path */
-	UINT sz_path	/* Size of path */
-)
-{
-	FRESULT res;
-	DIR dj;
-	UINT i, n;
-	DWORD ccl;
-	TCHAR *tp;
-	FILINFO fno;
-	DEF_NAMEBUF;
-
-
-	*path = 0;
-	res = chk_mounted((const TCHAR**)&path, &dj.fs, 0);	/* Get current volume */
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		i = sz_path;		/* Bottom of buffer (dir stack base) */
-		dj.sclust = dj.fs->cdir;			/* Start to follow upper dir from current dir */
-		while ((ccl = dj.sclust) != 0) {	/* Repeat while current dir is a sub-dir */
-			res = dir_sdi(&dj, 1);			/* Get parent dir */
-			if (res != FR_OK) break;
-			res = dir_read(&dj);
-			if (res != FR_OK) break;
-			dj.sclust = ld_clust(dj.fs, dj.dir);	/* Goto parent dir */
-			res = dir_sdi(&dj, 0);
-			if (res != FR_OK) break;
-			do {							/* Find the entry links to the child dir */
-				res = dir_read(&dj);
-				if (res != FR_OK) break;
-				if (ccl == ld_clust(dj.fs, dj.dir)) break;	/* Found the entry */
-				res = dir_next(&dj, 0);	
-			} while (res == FR_OK);
-			if (res == FR_NO_FILE) res = FR_INT_ERR;/* It cannot be 'not found'. */
-			if (res != FR_OK) break;
-#if _USE_LFN
-			fno.lfname = path;
-			fno.lfsize = i;
-#endif
-			get_fileinfo(&dj, &fno);		/* Get the dir name and push it to the buffer */
-			tp = fno.fname;
-			if (_USE_LFN && *path) tp = path;
-			for (n = 0; tp[n]; n++) ;
-			if (i < n + 3) {
-				res = FR_NOT_ENOUGH_CORE; break;
-			}
-			while (n) path[--i] = tp[--n];
-			path[--i] = '/';
-		}
-		tp = path;
-		if (res == FR_OK) {
-			*tp++ = '0' + CurrVol;			/* Put drive number */
-			*tp++ = ':';
-			if (i == sz_path) {				/* Root-dir */
-				*tp++ = '/';
-			} else {						/* Sub-dir */
-				do		/* Add stacked path str */
-					*tp++ = path[i++];
-				while (i < sz_path);
-			}
-		}
-		*tp = 0;
-		FREE_BUF();
-	}
-
-	LEAVE_FF(dj.fs, res);
-}
-#endif /* _FS_RPATH >= 2 */
-#endif /* _FS_RPATH >= 1 */
-
-
-
-#if _FS_MINIMIZE <= 2
-/*-----------------------------------------------------------------------*/
-/* Seek File R/W Pointer                                                 */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_lseek (
-	FIL *fp,		/* Pointer to the file object */
-	DWORD ofs		/* File pointer from top of file */
-)
-{
-	FRESULT res;
-
-
-	res = validate(fp);					/* Check validity of the object */
-	if (res != FR_OK) LEAVE_FF(fp->fs, res);
-	if (fp->flag & FA__ERROR)			/* Check abort flag */
-		LEAVE_FF(fp->fs, FR_INT_ERR);
-
-#if _USE_FASTSEEK
-	if (fp->cltbl) {	/* Fast seek */
-		DWORD cl, pcl, ncl, tcl, dsc, tlen, ulen, *tbl;
-
-		if (ofs == CREATE_LINKMAP) {	/* Create CLMT */
-			tbl = fp->cltbl;
-			tlen = *tbl++; ulen = 2;	/* Given table size and required table size */
-			cl = fp->sclust;			/* Top of the chain */
-			if (cl) {
-				do {
-					/* Get a fragment */
-					tcl = cl; ncl = 0; ulen += 2;	/* Top, length and used items */
-					do {
-						pcl = cl; ncl++;
-						cl = get_fat(fp->fs, cl);
-						if (cl <= 1) ABORT(fp->fs, FR_INT_ERR);
-						if (cl == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
-					} while (cl == pcl + 1);
-					if (ulen <= tlen) {		/* Store the length and top of the fragment */
-						*tbl++ = ncl; *tbl++ = tcl;
-					}
-				} while (cl < fp->fs->n_fatent);	/* Repeat until end of chain */
-			}
-			*fp->cltbl = ulen;	/* Number of items used */
-			if (ulen <= tlen)
-				*tbl = 0;		/* Terminate table */
-			else
-				res = FR_NOT_ENOUGH_CORE;	/* Given table size is smaller than required */
-
-		} else {						/* Fast seek */
-			if (ofs > fp->fsize)		/* Clip offset at the file size */
-				ofs = fp->fsize;
-			fp->fptr = ofs;				/* Set file pointer */
-			if (ofs) {
-				fp->clust = clmt_clust(fp, ofs - 1);
-				dsc = clust2sect(fp->fs, fp->clust);
-				if (!dsc) ABORT(fp->fs, FR_INT_ERR);
-				dsc += (ofs - 1) / SS(fp->fs) & (fp->fs->csize - 1);
-				if (fp->fptr % SS(fp->fs) && dsc != fp->dsect) {	/* Refill sector cache if needed */
-#if !_FS_TINY
-#if !_FS_READONLY
-					if (fp->flag & FA__DIRTY) {		/* Write-back dirty sector cache */
-						if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
-							ABORT(fp->fs, FR_DISK_ERR);
-						fp->flag &= ~FA__DIRTY;
-					}
-#endif
-					if (disk_read(fp->fs->drv, fp->buf, dsc, 1) != RES_OK)	/* Load current sector */
-						ABORT(fp->fs, FR_DISK_ERR);
-#endif
-					fp->dsect = dsc;
-				}
-			}
-		}
-	} else
-#endif
-
-	/* Normal Seek */
-	{
-		DWORD clst, bcs, nsect, ifptr;
-
-		if (ofs > fp->fsize					/* In read-only mode, clip offset with the file size */
-#if !_FS_READONLY
-			 && !(fp->flag & FA_WRITE)
-#endif
-			) ofs = fp->fsize;
-
-		ifptr = fp->fptr;
-		fp->fptr = nsect = 0;
-		if (ofs) {
-			bcs = (DWORD)fp->fs->csize * SS(fp->fs);	/* Cluster size (byte) */
-			if (ifptr > 0 &&
-				(ofs - 1) / bcs >= (ifptr - 1) / bcs) {	/* When seek to same or following cluster, */
-				fp->fptr = (ifptr - 1) & ~(bcs - 1);	/* start from the current cluster */
-				ofs -= fp->fptr;
-				clst = fp->clust;
-			} else {									/* When seek to back cluster, */
-				clst = fp->sclust;						/* start from the first cluster */
-#if !_FS_READONLY
-				if (clst == 0) {						/* If no cluster chain, create a new chain */
-					clst = create_chain(fp->fs, 0);
-					if (clst == 1) ABORT(fp->fs, FR_INT_ERR);
-					if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
-					fp->sclust = clst;
-				}
-#endif
-				fp->clust = clst;
-			}
-			if (clst != 0) {
-				while (ofs > bcs) {						/* Cluster following loop */
-#if !_FS_READONLY
-					if (fp->flag & FA_WRITE) {			/* Check if in write mode or not */
-						clst = create_chain(fp->fs, clst);	/* Force stretch if in write mode */
-						if (clst == 0) {				/* When disk gets full, clip file size */
-							ofs = bcs; break;
-						}
-					} else
-#endif
-						clst = get_fat(fp->fs, clst);	/* Follow cluster chain if not in write mode */
-					if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
-					if (clst <= 1 || clst >= fp->fs->n_fatent) ABORT(fp->fs, FR_INT_ERR);
-					fp->clust = clst;
-					fp->fptr += bcs;
-					ofs -= bcs;
-				}
-				fp->fptr += ofs;
-				if (ofs % SS(fp->fs)) {
-					nsect = clust2sect(fp->fs, clst);	/* Current sector */
-					if (!nsect) ABORT(fp->fs, FR_INT_ERR);
-					nsect += ofs / SS(fp->fs);
-				}
-			}
-		}
-		if (fp->fptr % SS(fp->fs) && nsect != fp->dsect) {	/* Fill sector cache if needed */
-#if !_FS_TINY
-#if !_FS_READONLY
-			if (fp->flag & FA__DIRTY) {			/* Write-back dirty sector cache */
-				if (disk_write(fp->fs->drv, fp->buf, fp->dsect, 1) != RES_OK)
-					ABORT(fp->fs, FR_DISK_ERR);
-				fp->flag &= ~FA__DIRTY;
-			}
-#endif
-			if (disk_read(fp->fs->drv, fp->buf, nsect, 1) != RES_OK)	/* Fill sector cache */
-				ABORT(fp->fs, FR_DISK_ERR);
-#endif
-			fp->dsect = nsect;
-		}
-#if !_FS_READONLY
-		if (fp->fptr > fp->fsize) {			/* Set file change flag if the file size is extended */
-			fp->fsize = fp->fptr;
-			fp->flag |= FA__WRITTEN;
-		}
-#endif
-	}
-
-	LEAVE_FF(fp->fs, res);
-}
-
-
-
-#if _FS_MINIMIZE <= 1
-/*-----------------------------------------------------------------------*/
-/* Create a Directory Object                                             */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_opendir (
-	DIR *dj,			/* Pointer to directory object to create */
-	const TCHAR *path	/* Pointer to the directory path */
-)
-{
-	FRESULT res;
-	FATFS *fs;
-	DEF_NAMEBUF;
-
-
-	if (!dj) return FR_INVALID_OBJECT;
-
-	res = chk_mounted(&path, &dj->fs, 0);
-	fs = dj->fs;
-	if (res == FR_OK) {
-		INIT_BUF(*dj);
-		res = follow_path(dj, path);			/* Follow the path to the directory */
-		FREE_BUF();
-		if (res == FR_OK) {						/* Follow completed */
-			if (dj->dir) {						/* It is not the root dir */
-				if (dj->dir[DIR_Attr] & AM_DIR) {	/* The object is a directory */
-					dj->sclust = ld_clust(fs, dj->dir);
-				} else {						/* The object is not a directory */
-					res = FR_NO_PATH;
-				}
-			}
-			if (res == FR_OK) {
-				dj->id = fs->id;
-				res = dir_sdi(dj, 0);			/* Rewind dir */
-			}
-		}
-		if (res == FR_NO_FILE) res = FR_NO_PATH;
-		if (res != FR_OK) dj->fs = 0;			/* Invalidate the dir object if function failed */
-	} else {
-		dj->fs = 0;
-	}
-
-	LEAVE_FF(fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Read Directory Entry in Sequence                                      */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_readdir (
-	DIR *dj,			/* Pointer to the open directory object */
-	FILINFO *fno		/* Pointer to file information to return */
-)
-{
-	FRESULT res;
-	DEF_NAMEBUF;
-
-
-	res = validate(dj);						/* Check validity of the object */
-	if (res == FR_OK) {
-		if (!fno) {
-			res = dir_sdi(dj, 0);			/* Rewind the directory object */
-		} else {
-			INIT_BUF(*dj);
-			res = dir_read(dj);				/* Read an directory item */
-			if (res == FR_NO_FILE) {		/* Reached end of dir */
-				dj->sect = 0;
-				res = FR_OK;
-			}
-			if (res == FR_OK) {				/* A valid entry is found */
-				get_fileinfo(dj, fno);		/* Get the object information */
-				res = dir_next(dj, 0);		/* Increment index for next */
-				if (res == FR_NO_FILE) {
-					dj->sect = 0;
-					res = FR_OK;
-				}
-			}
-			FREE_BUF();
-		}
-	}
-
-	LEAVE_FF(dj->fs, res);
-}
-
-
-
-#if _FS_MINIMIZE == 0
-/*-----------------------------------------------------------------------*/
-/* Get File Status                                                       */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_stat (
-	const TCHAR *path,	/* Pointer to the file path */
-	FILINFO *fno		/* Pointer to file information to return */
-)
-{
-	FRESULT res;
-	DIR dj;
-	DEF_NAMEBUF;
-
-
-	res = chk_mounted(&path, &dj.fs, 0);
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		res = follow_path(&dj, path);	/* Follow the file path */
-		if (res == FR_OK) {				/* Follow completed */
-			if (dj.dir)		/* Found an object */
-				get_fileinfo(&dj, fno);
-			else			/* It is root dir */
-				res = FR_INVALID_NAME;
-		}
-		FREE_BUF();
-	}
-
-	LEAVE_FF(dj.fs, res);
-}
-
-
-
-#if !_FS_READONLY
-/*-----------------------------------------------------------------------*/
-/* Get Number of Free Clusters                                           */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_getfree (
-	const TCHAR *path,	/* Pointer to the logical drive number (root dir) */
-	DWORD *nclst,		/* Pointer to the variable to return number of free clusters */
-	FATFS **fatfs		/* Pointer to pointer to corresponding file system object to return */
-)
-{
-	FRESULT res;
-	FATFS *fs;
-	DWORD n, clst, sect, stat;
-	UINT i;
-	BYTE fat, *p;
-
-
-	/* Get drive number */
-	res = chk_mounted(&path, fatfs, 0);
-	fs = *fatfs;
-	if (res == FR_OK) {
-		/* If free_clust is valid, return it without full cluster scan */
-		if (fs->free_clust <= fs->n_fatent - 2) {
-			*nclst = fs->free_clust;
-		} else {
-			/* Get number of free clusters */
-			fat = fs->fs_type;
-			n = 0;
-			if (fat == FS_FAT12) {
-				clst = 2;
-				do {
-					stat = get_fat(fs, clst);
-					if (stat == 0xFFFFFFFF) { res = FR_DISK_ERR; break; }
-					if (stat == 1) { res = FR_INT_ERR; break; }
-					if (stat == 0) n++;
-				} while (++clst < fs->n_fatent);
-			} else {
-				clst = fs->n_fatent;
-				sect = fs->fatbase;
-				i = 0; p = 0;
-				do {
-					if (!i) {
-						res = move_window(fs, sect++);
-						if (res != FR_OK) break;
-						p = fs->win;
-						i = SS(fs);
-					}
-					if (fat == FS_FAT16) {
-						if (LD_WORD(p) == 0) n++;
-						p += 2; i -= 2;
-					} else {
-						if ((LD_DWORD(p) & 0x0FFFFFFF) == 0) n++;
-						p += 4; i -= 4;
-					}
-				} while (--clst);
-			}
-			fs->free_clust = n;
-			if (fat == FS_FAT32) fs->fsi_flag = 1;
-			*nclst = n;
-		}
-	}
-	LEAVE_FF(fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Truncate File                                                         */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_truncate (
-	FIL *fp		/* Pointer to the file object */
-)
-{
-	FRESULT res;
-	DWORD ncl;
-
-
-	if (!fp) return FR_INVALID_OBJECT;
-
-	res = validate(fp);						/* Check validity of the object */
-	if (res == FR_OK) {
-		if (fp->flag & FA__ERROR) {			/* Check abort flag */
-			res = FR_INT_ERR;
-		} else {
-			if (!(fp->flag & FA_WRITE))		/* Check access mode */
-				res = FR_DENIED;
-		}
-	}
-	if (res == FR_OK) {
-		if (fp->fsize > fp->fptr) {
-			fp->fsize = fp->fptr;	/* Set file size to current R/W point */
-			fp->flag |= FA__WRITTEN;
-			if (fp->fptr == 0) {	/* When set file size to zero, remove entire cluster chain */
-				res = remove_chain(fp->fs, fp->sclust);
-				fp->sclust = 0;
-			} else {				/* When truncate a part of the file, remove remaining clusters */
-				ncl = get_fat(fp->fs, fp->clust);
-				res = FR_OK;
-				if (ncl == 0xFFFFFFFF) res = FR_DISK_ERR;
-				if (ncl == 1) res = FR_INT_ERR;
-				if (res == FR_OK && ncl < fp->fs->n_fatent) {
-					res = put_fat(fp->fs, fp->clust, 0x0FFFFFFF);
-					if (res == FR_OK) res = remove_chain(fp->fs, ncl);
-				}
-			}
-		}
-		if (res != FR_OK) fp->flag |= FA__ERROR;
-	}
-
-	LEAVE_FF(fp->fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Delete a File or Directory                                            */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_unlink (
-	const TCHAR *path		/* Pointer to the file or directory path */
-)
-{
-	FRESULT res;
-	DIR dj, sdj;
-	BYTE *dir;
-	DWORD dclst;
-	DEF_NAMEBUF;
-
-
-	res = chk_mounted(&path, &dj.fs, 1);
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		res = follow_path(&dj, path);		/* Follow the file path */
-		if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT))
-			res = FR_INVALID_NAME;			/* Cannot remove dot entry */
-#if _FS_LOCK
-		if (res == FR_OK) res = chk_lock(&dj, 2);	/* Cannot remove open file */
-#endif
-		if (res == FR_OK) {					/* The object is accessible */
-			dir = dj.dir;
-			if (!dir) {
-				res = FR_INVALID_NAME;		/* Cannot remove the start directory */
-			} else {
-				if (dir[DIR_Attr] & AM_RDO)
-					res = FR_DENIED;		/* Cannot remove R/O object */
-			}
-			dclst = ld_clust(dj.fs, dir);
-			if (res == FR_OK && (dir[DIR_Attr] & AM_DIR)) {	/* Is it a sub-dir? */
-				if (dclst < 2) {
-					res = FR_INT_ERR;
-				} else {
-					mem_cpy(&sdj, &dj, sizeof (DIR));	/* Check if the sub-dir is empty or not */
-					sdj.sclust = dclst;
-					res = dir_sdi(&sdj, 2);		/* Exclude dot entries */
-					if (res == FR_OK) {
-						res = dir_read(&sdj);
-						if (res == FR_OK		/* Not empty dir */
-#if _FS_RPATH
-						|| dclst == dj.fs->cdir	/* Current dir */
-#endif
-						) res = FR_DENIED;
-						if (res == FR_NO_FILE) res = FR_OK;	/* Empty */
-					}
-				}
-			}
-			if (res == FR_OK) {
-				res = dir_remove(&dj);		/* Remove the directory entry */
-				if (res == FR_OK) {
-					if (dclst)				/* Remove the cluster chain if exist */
-						res = remove_chain(dj.fs, dclst);
-					if (res == FR_OK) res = sync(dj.fs);
-				}
-			}
-		}
-		FREE_BUF();
-	}
-	LEAVE_FF(dj.fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Create a Directory                                                    */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_mkdir (
-	const TCHAR *path		/* Pointer to the directory path */
-)
-{
-	FRESULT res;
-	DIR dj;
-	BYTE *dir, n;
-	DWORD dsc, dcl, pcl, tim = get_fattime();
-	DEF_NAMEBUF;
-
-
-	res = chk_mounted(&path, &dj.fs, 1);
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		res = follow_path(&dj, path);			/* Follow the file path */
-		if (res == FR_OK) res = FR_EXIST;		/* Any object with same name is already existing */
-		if (_FS_RPATH && res == FR_NO_FILE && (dj.fn[NS] & NS_DOT))
-			res = FR_INVALID_NAME;
-		if (res == FR_NO_FILE) {				/* Can create a new directory */
-			dcl = create_chain(dj.fs, 0);		/* Allocate a cluster for the new directory table */
-			res = FR_OK;
-			if (dcl == 0) res = FR_DENIED;		/* No space to allocate a new cluster */
-			if (dcl == 1) res = FR_INT_ERR;
-			if (dcl == 0xFFFFFFFF) res = FR_DISK_ERR;
-			if (res == FR_OK)					/* Flush FAT */
-				res = move_window(dj.fs, 0);
-			if (res == FR_OK) {					/* Initialize the new directory table */
-				dsc = clust2sect(dj.fs, dcl);
-				dir = dj.fs->win;
-				mem_set(dir, 0, SS(dj.fs));
-				mem_set(dir+DIR_Name, ' ', 8+3);	/* Create "." entry */
-				dir[DIR_Name] = '.';
-				dir[DIR_Attr] = AM_DIR;
-				ST_DWORD(dir+DIR_WrtTime, tim);
-				st_clust(dir, dcl);
-				mem_cpy(dir+SZ_DIR, dir, SZ_DIR); 	/* Create ".." entry */
-				dir[33] = '.'; pcl = dj.sclust;
-				if (dj.fs->fs_type == FS_FAT32 && pcl == dj.fs->dirbase)
-					pcl = 0;
-				st_clust(dir+SZ_DIR, pcl);
-				for (n = dj.fs->csize; n; n--) {	/* Write dot entries and clear following sectors */
-					dj.fs->winsect = dsc++;
-					dj.fs->wflag = 1;
-					res = move_window(dj.fs, 0);
-					if (res != FR_OK) break;
-					mem_set(dir, 0, SS(dj.fs));
-				}
-			}
-			if (res == FR_OK) res = dir_register(&dj);	/* Register the object to the directory */
-			if (res != FR_OK) {
-				remove_chain(dj.fs, dcl);			/* Could not register, remove cluster chain */
-			} else {
-				dir = dj.dir;
-				dir[DIR_Attr] = AM_DIR;				/* Attribute */
-				ST_DWORD(dir+DIR_WrtTime, tim);		/* Created time */
-				st_clust(dir, dcl);					/* Table start cluster */
-				dj.fs->wflag = 1;
-				res = sync(dj.fs);
-			}
-		}
-		FREE_BUF();
-	}
-
-	LEAVE_FF(dj.fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Change Attribute                                                      */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_chmod (
-	const TCHAR *path,	/* Pointer to the file path */
-	BYTE value,			/* Attribute bits */
-	BYTE mask			/* Attribute mask to change */
-)
-{
-	FRESULT res;
-	DIR dj;
-	BYTE *dir;
-	DEF_NAMEBUF;
-
-
-	res = chk_mounted(&path, &dj.fs, 1);
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		res = follow_path(&dj, path);		/* Follow the file path */
-		FREE_BUF();
-		if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT))
-			res = FR_INVALID_NAME;
-		if (res == FR_OK) {
-			dir = dj.dir;
-			if (!dir) {						/* Is it a root directory? */
-				res = FR_INVALID_NAME;
-			} else {						/* File or sub directory */
-				mask &= AM_RDO|AM_HID|AM_SYS|AM_ARC;	/* Valid attribute mask */
-				dir[DIR_Attr] = (value & mask) | (dir[DIR_Attr] & (BYTE)~mask);	/* Apply attribute change */
-				dj.fs->wflag = 1;
-				res = sync(dj.fs);
-			}
-		}
-	}
-
-	LEAVE_FF(dj.fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Change Timestamp                                                      */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_utime (
-	const TCHAR *path,	/* Pointer to the file/directory name */
-	const FILINFO *fno	/* Pointer to the time stamp to be set */
-)
-{
-	FRESULT res;
-	DIR dj;
-	BYTE *dir;
-	DEF_NAMEBUF;
-
-
-	res = chk_mounted(&path, &dj.fs, 1);
-	if (res == FR_OK) {
-		INIT_BUF(dj);
-		res = follow_path(&dj, path);	/* Follow the file path */
-		FREE_BUF();
-		if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT))
-			res = FR_INVALID_NAME;
-		if (res == FR_OK) {
-			dir = dj.dir;
-			if (!dir) {					/* Root directory */
-				res = FR_INVALID_NAME;
-			} else {					/* File or sub-directory */
-				ST_WORD(dir+DIR_WrtTime, fno->ftime);
-				ST_WORD(dir+DIR_WrtDate, fno->fdate);
-				dj.fs->wflag = 1;
-				res = sync(dj.fs);
-			}
-		}
-	}
-
-	LEAVE_FF(dj.fs, res);
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Rename File/Directory                                                 */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_rename (
-	const TCHAR *path_old,	/* Pointer to the old name */
-	const TCHAR *path_new	/* Pointer to the new name */
-)
-{
-	FRESULT res;
-	DIR djo, djn;
-	BYTE buf[21], *dir;
-	DWORD dw;
-	DEF_NAMEBUF;
-
-
-	res = chk_mounted(&path_old, &djo.fs, 1);
-	if (res == FR_OK) {
-		djn.fs = djo.fs;
-		INIT_BUF(djo);
-		res = follow_path(&djo, path_old);		/* Check old object */
-		if (_FS_RPATH && res == FR_OK && (djo.fn[NS] & NS_DOT))
-			res = FR_INVALID_NAME;
-#if _FS_LOCK
-		if (res == FR_OK) res = chk_lock(&djo, 2);
-#endif
-		if (res == FR_OK) {						/* Old object is found */
-			if (!djo.dir) {						/* Is root dir? */
-				res = FR_NO_FILE;
-			} else {
-				mem_cpy(buf, djo.dir+DIR_Attr, 21);		/* Save the object information except for name */
-				mem_cpy(&djn, &djo, sizeof (DIR));		/* Check new object */
-				res = follow_path(&djn, path_new);
-				if (res == FR_OK) res = FR_EXIST;		/* The new object name is already existing */
-				if (res == FR_NO_FILE) { 				/* Is it a valid path and no name collision? */
-/* Start critical section that an interruption or error can cause cross-link */
-					res = dir_register(&djn);			/* Register the new entry */
-					if (res == FR_OK) {
-						dir = djn.dir;					/* Copy object information except for name */
-						mem_cpy(dir+13, buf+2, 19);
-						dir[DIR_Attr] = buf[0] | AM_ARC;
-						djo.fs->wflag = 1;
-						if (djo.sclust != djn.sclust && (dir[DIR_Attr] & AM_DIR)) {		/* Update .. entry in the directory if needed */
-							dw = clust2sect(djo.fs, ld_clust(djo.fs, dir));
-							if (!dw) {
-								res = FR_INT_ERR;
-							} else {
-								res = move_window(djo.fs, dw);
-								dir = djo.fs->win+SZ_DIR;	/* .. entry */
-								if (res == FR_OK && dir[1] == '.') {
-									dw = (djo.fs->fs_type == FS_FAT32 && djn.sclust == djo.fs->dirbase) ? 0 : djn.sclust;
-									st_clust(dir, dw);
-									djo.fs->wflag = 1;
-								}
-							}
-						}
-						if (res == FR_OK) {
-							res = dir_remove(&djo);		/* Remove old entry */
-							if (res == FR_OK)
-								res = sync(djo.fs);
-						}
-					}
-/* End critical section */
-				}
-			}
-		}
-		FREE_BUF();
-	}
-	LEAVE_FF(djo.fs, res);
-}
-
-#endif /* !_FS_READONLY */
-#endif /* _FS_MINIMIZE == 0 */
-#endif /* _FS_MINIMIZE <= 1 */
-#endif /* _FS_MINIMIZE <= 2 */
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Forward data to the stream directly (available on only tiny cfg)      */
-/*-----------------------------------------------------------------------*/
-#if _USE_FORWARD && _FS_TINY
-
-FRESULT f_forward (
-	FIL *fp, 						/* Pointer to the file object */
-	UINT (*func)(const BYTE*,UINT),	/* Pointer to the streaming function */
-	UINT btr,						/* Number of bytes to forward */
-	UINT *bf						/* Pointer to number of bytes forwarded */
-)
-{
-	FRESULT res;
-	DWORD remain, clst, sect;
-	UINT rcnt;
-	BYTE csect;
-
-
-	*bf = 0;	/* Clear transfer byte counter */
-
-	if (!fp) return FR_INVALID_OBJECT;
-
-	res = validate(fp);								/* Check validity of the object */
-	if (res != FR_OK) LEAVE_FF(fp->fs, res);
-	if (fp->flag & FA__ERROR)						/* Check error flag */
-		LEAVE_FF(fp->fs, FR_INT_ERR);
-	if (!(fp->flag & FA_READ))						/* Check access mode */
-		LEAVE_FF(fp->fs, FR_DENIED);
-
-	remain = fp->fsize - fp->fptr;
-	if (btr > remain) btr = (UINT)remain;			/* Truncate btr by remaining bytes */
-
-	for ( ;  btr && (*func)(0, 0);					/* Repeat until all data transferred or stream becomes busy */
-		fp->fptr += rcnt, *bf += rcnt, btr -= rcnt) {
-		csect = (BYTE)(fp->fptr / SS(fp->fs) & (fp->fs->csize - 1));	/* Sector offset in the cluster */
-		if ((fp->fptr % SS(fp->fs)) == 0) {			/* On the sector boundary? */
-			if (!csect) {							/* On the cluster boundary? */
-				clst = (fp->fptr == 0) ?			/* On the top of the file? */
-					fp->sclust : get_fat(fp->fs, fp->clust);
-				if (clst <= 1) ABORT(fp->fs, FR_INT_ERR);
-				if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
-				fp->clust = clst;					/* Update current cluster */
-			}
-		}
-		sect = clust2sect(fp->fs, fp->clust);		/* Get current data sector */
-		if (!sect) ABORT(fp->fs, FR_INT_ERR);
-		sect += csect;
-		if (move_window(fp->fs, sect))				/* Move sector window */
-			ABORT(fp->fs, FR_DISK_ERR);
-		fp->dsect = sect;
-		rcnt = SS(fp->fs) - (WORD)(fp->fptr % SS(fp->fs));	/* Forward data from sector window */
-		if (rcnt > btr) rcnt = btr;
-		rcnt = (*func)(&fp->fs->win[(WORD)fp->fptr % SS(fp->fs)], rcnt);
-		if (!rcnt) ABORT(fp->fs, FR_INT_ERR);
-	}
-
-	LEAVE_FF(fp->fs, FR_OK);
-}
-#endif /* _USE_FORWARD */
-
-
-
-#if _USE_MKFS && !_FS_READONLY
-/*-----------------------------------------------------------------------*/
-/* Create File System on the Drive                                       */
-/*-----------------------------------------------------------------------*/
-#define N_ROOTDIR	512		/* Number of root dir entries for FAT12/16 */
-#define N_FATS		1		/* Number of FAT copies (1 or 2) */
-
-
-FRESULT f_mkfs (
-	BYTE drv,		/* Logical drive number */
-	BYTE sfd,		/* Partitioning rule 0:FDISK, 1:SFD */
-	UINT au			/* Allocation unit size [bytes] */
-)
-{
-	static const WORD vst[] = { 1024,   512,  256,  128,   64,    32,   16,    8,    4,    2,   0};
-	static const WORD cst[] = {32768, 16384, 8192, 4096, 2048, 16384, 8192, 4096, 2048, 1024, 512};
-	BYTE fmt, md, sys, *tbl, pdrv, part;
-	DWORD n_clst, vs, n, wsect;
-	UINT i;
-	DWORD b_vol, b_fat, b_dir, b_data;	/* LBA */
-	DWORD n_vol, n_rsv, n_fat, n_dir;	/* Size */
-	FATFS *fs;
-	DSTATUS stat;
-
-
-	/* Check mounted drive and clear work area */
-	if (drv >= _VOLUMES) return FR_INVALID_DRIVE;
-	if (sfd > 1) return FR_INVALID_PARAMETER;
-	if (au & (au - 1)) return FR_INVALID_PARAMETER;
-	fs = FatFs[drv];
-	if (!fs) return FR_NOT_ENABLED;
-	fs->fs_type = 0;
-	pdrv = LD2PD(drv);	/* Physical drive */
-	part = LD2PT(drv);	/* Partition (0:auto detect, 1-4:get from partition table)*/
-
-	/* Get disk statics */
-	stat = disk_initialize(pdrv);
-	if (stat & STA_NOINIT) return FR_NOT_READY;
-	if (stat & STA_PROTECT) return FR_WRITE_PROTECTED;
-#if _MAX_SS != 512					/* Get disk sector size */
-	if (disk_ioctl(pdrv, GET_SECTOR_SIZE, &SS(fs)) != RES_OK || SS(fs) > _MAX_SS)
-		return FR_DISK_ERR;
-#endif
-	if (_MULTI_PARTITION && part) {
-		/* Get partition information from partition table in the MBR */
-		if (disk_read(pdrv, fs->win, 0, 1) != RES_OK) return FR_DISK_ERR;
-		if (LD_WORD(fs->win+BS_55AA) != 0xAA55) return FR_MKFS_ABORTED;
-		tbl = &fs->win[MBR_Table + (part - 1) * SZ_PTE];
-		if (!tbl[4]) return FR_MKFS_ABORTED;	/* No partition? */
-		b_vol = LD_DWORD(tbl+8);	/* Volume start sector */
-		n_vol = LD_DWORD(tbl+12);	/* Volume size */
-	} else {
-		/* Create a partition in this function */
-		if (disk_ioctl(pdrv, GET_SECTOR_COUNT, &n_vol) != RES_OK || n_vol < 128)
-			return FR_DISK_ERR;
-		b_vol = (sfd) ? 0 : 63;		/* Volume start sector */
-		n_vol -= b_vol;				/* Volume size */
-	}
-
-	if (!au) {				/* AU auto selection */
-		vs = n_vol / (2000 / (SS(fs) / 512));
-		for (i = 0; vs < vst[i]; i++) ;
-		au = cst[i];
-	}
-	au /= SS(fs);		/* Number of sectors per cluster */
-	if (au == 0) au = 1;
-	if (au > 128) au = 128;
-
-	/* Pre-compute number of clusters and FAT sub-type */
-	n_clst = n_vol / au;
-	fmt = FS_FAT12;
-	if (n_clst >= MIN_FAT16) fmt = FS_FAT16;
-	if (n_clst >= MIN_FAT32) fmt = FS_FAT32;
-
-	/* Determine offset and size of FAT structure */
-	if (fmt == FS_FAT32) {
-		n_fat = ((n_clst * 4) + 8 + SS(fs) - 1) / SS(fs);
-		n_rsv = 32;
-		n_dir = 0;
-	} else {
-		n_fat = (fmt == FS_FAT12) ? (n_clst * 3 + 1) / 2 + 3 : (n_clst * 2) + 4;
-		n_fat = (n_fat + SS(fs) - 1) / SS(fs);
-		n_rsv = 1;
-		n_dir = (DWORD)N_ROOTDIR * SZ_DIR / SS(fs);
-	}
-	b_fat = b_vol + n_rsv;				/* FAT area start sector */
-	b_dir = b_fat + n_fat * N_FATS;		/* Directory area start sector */
-	b_data = b_dir + n_dir;				/* Data area start sector */
-	if (n_vol < b_data + au - b_vol) return FR_MKFS_ABORTED;	/* Too small volume */
-
-	/* Align data start sector to erase block boundary (for flash memory media) */
-	if (disk_ioctl(pdrv, GET_BLOCK_SIZE, &n) != RES_OK || !n || n > 32768) n = 1;
-	n = (b_data + n - 1) & ~(n - 1);	/* Next nearest erase block from current data start */
-	n = (n - b_data) / N_FATS;
-	if (fmt == FS_FAT32) {		/* FAT32: Move FAT offset */
-		n_rsv += n;
-		b_fat += n;
-	} else {					/* FAT12/16: Expand FAT size */
-		n_fat += n;
-	}
-
-	/* Determine number of clusters and final check of validity of the FAT sub-type */
-	n_clst = (n_vol - n_rsv - n_fat * N_FATS - n_dir) / au;
-	if (   (fmt == FS_FAT16 && n_clst < MIN_FAT16)
-		|| (fmt == FS_FAT32 && n_clst < MIN_FAT32))
-		return FR_MKFS_ABORTED;
-
-	switch (fmt) {	/* Determine system ID for partition table */
-	case FS_FAT12:	sys = 0x01; break;
-	case FS_FAT16:	sys = (n_vol < 0x10000) ? 0x04 : 0x06; break;
-	default: 		sys = 0x0C;
-	}
-
-	if (_MULTI_PARTITION && part) {
-		/* Update system ID in the partition table */
-		tbl = &fs->win[MBR_Table + (part - 1) * SZ_PTE];
-		tbl[4] = sys;
-		if (disk_write(pdrv, fs->win, 0, 1) != RES_OK) return FR_DISK_ERR;
-		md = 0xF8;
-	} else {
-		if (sfd) {	/* No partition table (SFD) */
-			md = 0xF0;
-		} else {	/* Create partition table (FDISK) */
-			mem_set(fs->win, 0, SS(fs));
-			tbl = fs->win+MBR_Table;	/* Create partition table for single partition in the drive */
-			tbl[1] = 1;						/* Partition start head */
-			tbl[2] = 1;						/* Partition start sector */
-			tbl[3] = 0;						/* Partition start cylinder */
-			tbl[4] = sys;					/* System type */
-			tbl[5] = 254;					/* Partition end head */
-			n = (b_vol + n_vol) / 63 / 255;
-			tbl[6] = (BYTE)((n >> 2) | 63);	/* Partition end sector */
-			tbl[7] = (BYTE)n;				/* End cylinder */
-			ST_DWORD(tbl+8, 63);			/* Partition start in LBA */
-			ST_DWORD(tbl+12, n_vol);		/* Partition size in LBA */
-			ST_WORD(fs->win+BS_55AA, 0xAA55);	/* MBR signature */
-			if (disk_write(pdrv, fs->win, 0, 1) != RES_OK)	/* Write it to the MBR sector */
-				return FR_DISK_ERR;
-			md = 0xF8;
-		}
-	}
-
-	/* Create BPB in the VBR */
-	tbl = fs->win;							/* Clear sector */
-	mem_set(tbl, 0, SS(fs));
-	mem_cpy(tbl, "\xEB\xFE\x90" "MSDOS5.0", 11);/* Boot jump code, OEM name */
-	i = SS(fs);								/* Sector size */
-	ST_WORD(tbl+BPB_BytsPerSec, i);
-	tbl[BPB_SecPerClus] = (BYTE)au;			/* Sectors per cluster */
-	ST_WORD(tbl+BPB_RsvdSecCnt, n_rsv);		/* Reserved sectors */
-	tbl[BPB_NumFATs] = N_FATS;				/* Number of FATs */
-	i = (fmt == FS_FAT32) ? 0 : N_ROOTDIR;	/* Number of rootdir entries */
-	ST_WORD(tbl+BPB_RootEntCnt, i);
-	if (n_vol < 0x10000) {					/* Number of total sectors */
-		ST_WORD(tbl+BPB_TotSec16, n_vol);
-	} else {
-		ST_DWORD(tbl+BPB_TotSec32, n_vol);
-	}
-	tbl[BPB_Media] = md;					/* Media descriptor */
-	ST_WORD(tbl+BPB_SecPerTrk, 63);			/* Number of sectors per track */
-	ST_WORD(tbl+BPB_NumHeads, 255);			/* Number of heads */
-	ST_DWORD(tbl+BPB_HiddSec, b_vol);		/* Hidden sectors */
-	n = get_fattime();						/* Use current time as VSN */
-	if (fmt == FS_FAT32) {
-		ST_DWORD(tbl+BS_VolID32, n);		/* VSN */
-		ST_DWORD(tbl+BPB_FATSz32, n_fat);	/* Number of sectors per FAT */
-		ST_DWORD(tbl+BPB_RootClus, 2);		/* Root directory start cluster (2) */
-		ST_WORD(tbl+BPB_FSInfo, 1);			/* FSInfo record offset (VBR+1) */
-		ST_WORD(tbl+BPB_BkBootSec, 6);		/* Backup boot record offset (VBR+6) */
-		tbl[BS_DrvNum32] = 0x80;			/* Drive number */
-		tbl[BS_BootSig32] = 0x29;			/* Extended boot signature */
-		mem_cpy(tbl+BS_VolLab32, "NO NAME    " "FAT32   ", 19);	/* Volume label, FAT signature */
-	} else {
-		ST_DWORD(tbl+BS_VolID, n);			/* VSN */
-		ST_WORD(tbl+BPB_FATSz16, n_fat);	/* Number of sectors per FAT */
-		tbl[BS_DrvNum] = 0x80;				/* Drive number */
-		tbl[BS_BootSig] = 0x29;				/* Extended boot signature */
-		mem_cpy(tbl+BS_VolLab, "NO NAME    " "FAT     ", 19);	/* Volume label, FAT signature */
-	}
-	ST_WORD(tbl+BS_55AA, 0xAA55);			/* Signature (Offset is fixed here regardless of sector size) */
-	if (disk_write(pdrv, tbl, b_vol, 1) != RES_OK)	/* Write it to the VBR sector */
-		return FR_DISK_ERR;
-	if (fmt == FS_FAT32)							/* Write backup VBR if needed (VBR+6) */
-		disk_write(pdrv, tbl, b_vol + 6, 1);
-
-	/* Initialize FAT area */
-	wsect = b_fat;
-	for (i = 0; i < N_FATS; i++) {		/* Initialize each FAT copy */
-		mem_set(tbl, 0, SS(fs));			/* 1st sector of the FAT  */
-		n = md;								/* Media descriptor byte */
-		if (fmt != FS_FAT32) {
-			n |= (fmt == FS_FAT12) ? 0x00FFFF00 : 0xFFFFFF00;
-			ST_DWORD(tbl+0, n);				/* Reserve cluster #0-1 (FAT12/16) */
-		} else {
-			n |= 0xFFFFFF00;
-			ST_DWORD(tbl+0, n);				/* Reserve cluster #0-1 (FAT32) */
-			ST_DWORD(tbl+4, 0xFFFFFFFF);
-			ST_DWORD(tbl+8, 0x0FFFFFFF);	/* Reserve cluster #2 for root dir */
-		}
-		if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK)
-			return FR_DISK_ERR;
-		mem_set(tbl, 0, SS(fs));			/* Fill following FAT entries with zero */
-		for (n = 1; n < n_fat; n++) {		/* This loop may take a time on FAT32 volume due to many single sector writes */
-			if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK)
-				return FR_DISK_ERR;
-		}
-	}
-
-	/* Initialize root directory */
-	i = (fmt == FS_FAT32) ? au : n_dir;
-	do {
-		if (disk_write(pdrv, tbl, wsect++, 1) != RES_OK)
-			return FR_DISK_ERR;
-	} while (--i);
-
-#if _USE_ERASE	/* Erase data area if needed */
-	{
-		DWORD eb[2];
-
-		eb[0] = wsect; eb[1] = wsect + (n_clst - ((fmt == FS_FAT32) ? 1 : 0)) * au - 1;
-		disk_ioctl(pdrv, CTRL_ERASE_SECTOR, eb);
-	}
-#endif
-
-	/* Create FSInfo if needed */
-	if (fmt == FS_FAT32) {
-		ST_DWORD(tbl+FSI_LeadSig, 0x41615252);
-		ST_DWORD(tbl+FSI_StrucSig, 0x61417272);
-		ST_DWORD(tbl+FSI_Free_Count, n_clst - 1);	/* Number of free clusters */
-		ST_DWORD(tbl+FSI_Nxt_Free, 2);				/* Last allocated cluster# */
-		ST_WORD(tbl+BS_55AA, 0xAA55);
-		disk_write(pdrv, tbl, b_vol + 1, 1);	/* Write original (VBR+1) */
-		disk_write(pdrv, tbl, b_vol + 7, 1);	/* Write backup (VBR+7) */
-	}
-
-	return (disk_ioctl(pdrv, CTRL_SYNC, 0) == RES_OK) ? FR_OK : FR_DISK_ERR;
-}
-
-
-#if _MULTI_PARTITION == 2
-/*-----------------------------------------------------------------------*/
-/* Divide Physical Drive                                                 */
-/*-----------------------------------------------------------------------*/
-
-FRESULT f_fdisk (
-	BYTE pdrv,			/* Physical drive number */
-	const DWORD szt[],	/* Pointer to the size table for each partitions */
-	void* work			/* Pointer to the working buffer */
-)
-{
-	UINT i, n, sz_cyl, tot_cyl, b_cyl, e_cyl, p_cyl;
-	BYTE s_hd, e_hd, *p, *buf = (BYTE*)work;
-	DSTATUS stat;
-	DWORD sz_disk, sz_part, s_part;
-
-
-	stat = disk_initialize(pdrv);
-	if (stat & STA_NOINIT) return FR_NOT_READY;
-	if (stat & STA_PROTECT) return FR_WRITE_PROTECTED;
-	if (disk_ioctl(pdrv, GET_SECTOR_COUNT, &sz_disk)) return FR_DISK_ERR;
-
-	/* Determine CHS in the table regardless of the drive geometry */
-	for (n = 16; n < 256 && sz_disk / n / 63 > 1024; n *= 2) ;
-	if (n == 256) n--;
-	e_hd = n - 1;
-	sz_cyl = 63 * n;
-	tot_cyl = sz_disk / sz_cyl;
-
-	/* Create partition table */
-	mem_set(buf, 0, _MAX_SS);
-	p = buf + MBR_Table; b_cyl = 0;
-	for (i = 0; i < 4; i++, p += SZ_PTE) {
-		p_cyl = (szt[i] <= 100) ? (DWORD)tot_cyl * szt[i] / 100 : szt[i] / sz_cyl;
-		if (!p_cyl) continue;
-		s_part = (DWORD)sz_cyl * b_cyl;
-		sz_part = (DWORD)sz_cyl * p_cyl;
-		if (i == 0) {	/* Exclude first track of cylinder 0 */
-			s_hd = 1;
-			s_part += 63; sz_part -= 63;
-		} else {
-			s_hd = 0;
-		}
-		e_cyl = b_cyl + p_cyl - 1;
-		if (e_cyl >= tot_cyl) return FR_INVALID_PARAMETER;
-
-		/* Set partition table */
-		p[1] = s_hd;						/* Start head */
-		p[2] = (BYTE)((b_cyl >> 2) + 1);	/* Start sector */
-		p[3] = (BYTE)b_cyl;					/* Start cylinder */
-		p[4] = 0x06;						/* System type (temporary setting) */
-		p[5] = e_hd;						/* End head */
-		p[6] = (BYTE)((e_cyl >> 2) + 63);	/* End sector */
-		p[7] = (BYTE)e_cyl;					/* End cylinder */
-		ST_DWORD(p + 8, s_part);			/* Start sector in LBA */
-		ST_DWORD(p + 12, sz_part);			/* Partition size */
-
-		/* Next partition */
-		b_cyl += p_cyl;
-	}
-	ST_WORD(p, 0xAA55);
-
-	/* Write it to the MBR */
-	return (disk_write(pdrv, buf, 0, 1) || disk_ioctl(pdrv, CTRL_SYNC, 0)) ? FR_DISK_ERR : FR_OK;
-}
-
-
-#endif /* _MULTI_PARTITION == 2 */
-#endif /* _USE_MKFS && !_FS_READONLY */
-
-
-
-
-#if _USE_STRFUNC
-/*-----------------------------------------------------------------------*/
-/* Get a string from the file                                            */
-/*-----------------------------------------------------------------------*/
-TCHAR* f_gets (
-	TCHAR* buff,	/* Pointer to the string buffer to read */
-	int len,		/* Size of string buffer (characters) */
-	FIL* fil		/* Pointer to the file object */
-)
-{
-	int n = 0;
-	TCHAR c, *p = buff;
-	BYTE s[2];
-	UINT rc;
-
-
-	while (n < len - 1) {			/* Read bytes until buffer gets filled */
-		f_read(fil, s, 1, &rc);
-		if (rc != 1) break;			/* Break on EOF or error */
-		c = s[0];
-#if _LFN_UNICODE					/* Read a character in UTF-8 encoding */
-		if (c >= 0x80) {
-			if (c < 0xC0) continue;	/* Skip stray trailer */
-			if (c < 0xE0) {			/* Two-byte sequence */
-				f_read(fil, s, 1, &rc);
-				if (rc != 1) break;
-				c = ((c & 0x1F) << 6) | (s[0] & 0x3F);
-				if (c < 0x80) c = '?';
-			} else {
-				if (c < 0xF0) {		/* Three-byte sequence */
-					f_read(fil, s, 2, &rc);
-					if (rc != 2) break;
-					c = (c << 12) | ((s[0] & 0x3F) << 6) | (s[1] & 0x3F);
-					if (c < 0x800) c = '?';
-				} else {			/* Reject four-byte sequence */
-					c = '?';
-				}
-			}
-		}
-#endif
-#if _USE_STRFUNC >= 2
-		if (c == '\r') continue;	/* Strip '\r' */
-#endif
-		*p++ = c;
-		n++;
-		if (c == '\n') break;		/* Break on EOL */
-	}
-	*p = 0;
-	return n ? buff : 0;			/* When no data read (eof or error), return with error. */
-}
-
-
-
-#if !_FS_READONLY
-#include <stdarg.h>
-/*-----------------------------------------------------------------------*/
-/* Put a character to the file                                           */
-/*-----------------------------------------------------------------------*/
-int f_putc (
-	TCHAR c,	/* A character to be output */
-	FIL* fil	/* Pointer to the file object */
-)
-{
-	UINT bw, btw;
-	BYTE s[3];
-
-
-#if _USE_STRFUNC >= 2
-	if (c == '\n') f_putc ('\r', fil);	/* LF -> CRLF conversion */
-#endif
-
-#if _LFN_UNICODE	/* Write the character in UTF-8 encoding */
-	if (c < 0x80) {			/* 7-bit */
-		s[0] = (BYTE)c;
-		btw = 1;
-	} else {
-		if (c < 0x800) {	/* 11-bit */
-			s[0] = (BYTE)(0xC0 | (c >> 6));
-			s[1] = (BYTE)(0x80 | (c & 0x3F));
-			btw = 2;
-		} else {			/* 16-bit */
-			s[0] = (BYTE)(0xE0 | (c >> 12));
-			s[1] = (BYTE)(0x80 | ((c >> 6) & 0x3F));
-			s[2] = (BYTE)(0x80 | (c & 0x3F));
-			btw = 3;
-		}
-	}
-#else				/* Write the character without conversion */
-	s[0] = (BYTE)c;
-	btw = 1;
-#endif
-	f_write(fil, s, btw, &bw);		/* Write the char to the file */
-	return (bw == btw) ? 1 : EOF;	/* Return the result */
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Put a string to the file                                              */
-/*-----------------------------------------------------------------------*/
-int f_puts (
-	const TCHAR* str,	/* Pointer to the string to be output */
-	FIL* fil			/* Pointer to the file object */
-)
-{
-	int n;
-
-
-	for (n = 0; *str; str++, n++) {
-		if (f_putc(*str, fil) == EOF) return EOF;
-	}
-	return n;
-}
-
-
-
-
-/*-----------------------------------------------------------------------*/
-/* Put a formatted string to the file                                    */
-/*-----------------------------------------------------------------------*/
-int f_printf (
-	FIL* fil,			/* Pointer to the file object */
-	const TCHAR* str,	/* Pointer to the format string */
-	...					/* Optional arguments... */
-)
-{
-	va_list arp;
-	BYTE f, r;
-	UINT i, j, w;
-	ULONG v;
-	TCHAR c, d, s[16], *p;
-	int res, chc, cc;
-
-
-	va_start(arp, str);
-
-	for (cc = res = 0; cc != EOF; res += cc) {
-		c = *str++;
-		if (c == 0) break;			/* End of string */
-		if (c != '%') {				/* Non escape character */
-			cc = f_putc(c, fil);
-			if (cc != EOF) cc = 1;
-			continue;
-		}
-		w = f = 0;
-		c = *str++;
-		if (c == '0') {				/* Flag: '0' padding */
-			f = 1; c = *str++;
-		} else {
-			if (c == '-') {			/* Flag: left justified */
-				f = 2; c = *str++;
-			}
-		}
-		while (IsDigit(c)) {		/* Precision */
-			w = w * 10 + c - '0';
-			c = *str++;
-		}
-		if (c == 'l' || c == 'L') {	/* Prefix: Size is long int */
-			f |= 4; c = *str++;
-		}
-		if (!c) break;
-		d = c;
-		if (IsLower(d)) d -= 0x20;
-		switch (d) {				/* Type is... */
-		case 'S' :					/* String */
-			p = va_arg(arp, TCHAR*);
-			for (j = 0; p[j]; j++) ;
-			chc = 0;
-			if (!(f & 2)) {
-				while (j++ < w) chc += (cc = f_putc(' ', fil));
-			}
-			chc += (cc = f_puts(p, fil));
-			while (j++ < w) chc += (cc = f_putc(' ', fil));
-			if (cc != EOF) cc = chc;
-			continue;
-		case 'C' :					/* Character */
-			cc = f_putc((TCHAR)va_arg(arp, int), fil); continue;
-		case 'B' :					/* Binary */
-			r = 2; break;
-		case 'O' :					/* Octal */
-			r = 8; break;
-		case 'D' :					/* Signed decimal */
-		case 'U' :					/* Unsigned decimal */
-			r = 10; break;
-		case 'X' :					/* Hexdecimal */
-			r = 16; break;
-		default:					/* Unknown type (pass-through) */
-			cc = f_putc(c, fil); continue;
-		}
-
-		/* Get an argument and put it in numeral */
-		v = (f & 4) ? (ULONG)va_arg(arp, long) : ((d == 'D') ? (ULONG)(long)va_arg(arp, int) : (ULONG)va_arg(arp, unsigned int));
-		if (d == 'D' && (v & 0x80000000)) {
-			v = 0 - v;
-			f |= 8;
-		}
-		i = 0;
-		do {
-			d = (TCHAR)(v % r); v /= r;
-			if (d > 9) d += (c == 'x') ? 0x27 : 0x07;
-			s[i++] = d + '0';
-		} while (v && i < sizeof s / sizeof s[0]);
-		if (f & 8) s[i++] = '-';
-		j = i; d = (f & 1) ? '0' : ' ';
-		res = 0;
-		while (!(f & 2) && j++ < w) res += (cc = f_putc(d, fil));
-		do res += (cc = f_putc(s[--i], fil)); while(i);
-		while (j++ < w) res += (cc = f_putc(' ', fil));
-		if (cc != EOF) cc = res;
-	}
-
-	va_end(arp);
-	return (cc == EOF) ? cc : res;
-}
-
-#endif /* !_FS_READONLY */
-#endif /* _USE_STRFUNC */
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/ff.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/ff.h
deleted file mode 100644
index 627cbaabe6..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/ff.h
+++ /dev/null
@@ -1,337 +0,0 @@
-/*---------------------------------------------------------------------------/
-/  FatFs - FAT file system module include file  R0.09a    (C)ChaN, 2012
-/----------------------------------------------------------------------------/
-/ FatFs module is a generic FAT file system module for small embedded systems.
-/ This is a free software that opened for education, research and commercial
-/ developments under license policy of following terms.
-/
-/  Copyright (C) 2012, ChaN, all right reserved.
-/
-/ * The FatFs module is a free software and there is NO WARRANTY.
-/ * No restriction on use. You can use, modify and redistribute it for
-/   personal, non-profit or commercial product UNDER YOUR RESPONSIBILITY.
-/ * Redistributions of source code must retain the above copyright notice.
-/
-/----------------------------------------------------------------------------*/
-
-#ifndef _FATFS
-#define _FATFS	4004	/* Revision ID */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include "integer.h"	/* Basic integer types */
-#include "ffconf.h"		/* FatFs configuration options */
-
-#if _FATFS != _FFCONF
-#error Wrong configuration file (ffconf.h).
-#endif
-
-
-
-/* Definitions of volume management */
-
-#if _MULTI_PARTITION		/* Multiple partition configuration */
-typedef struct {
-	BYTE pd;	/* Physical drive number */
-	BYTE pt;	/* Partition: 0:Auto detect, 1-4:Forced partition) */
-} PARTITION;
-extern PARTITION VolToPart[];	/* Volume - Partition resolution table */
-#define LD2PD(vol) (VolToPart[vol].pd)	/* Get physical drive number */
-#define LD2PT(vol) (VolToPart[vol].pt)	/* Get partition index */
-
-#else							/* Single partition configuration */
-#define LD2PD(vol) (BYTE)(vol)	/* Each logical drive is bound to the same physical drive number */
-#define LD2PT(vol) 0			/* Always mounts the 1st partition or in SFD */
-
-#endif
-
-
-
-/* Type of path name strings on FatFs API */
-
-#if _LFN_UNICODE			/* Unicode string */
-#if !_USE_LFN
-#error _LFN_UNICODE must be 0 in non-LFN cfg.
-#endif
-#ifndef _INC_TCHAR
-typedef WCHAR TCHAR;
-#define _T(x) L ## x
-#define _TEXT(x) L ## x
-#endif
-
-#else						/* ANSI/OEM string */
-#ifndef _INC_TCHAR
-typedef char TCHAR;
-#define _T(x) x
-#define _TEXT(x) x
-#endif
-
-#endif
-
-
-
-/* File system object structure (FATFS) */
-
-typedef struct {
-	BYTE	fs_type;		/* FAT sub-type (0:Not mounted) */
-	BYTE	drv;			/* Physical drive number */
-	BYTE	csize;			/* Sectors per cluster (1,2,4...128) */
-	BYTE	n_fats;			/* Number of FAT copies (1,2) */
-	BYTE	wflag;			/* win[] dirty flag (1:must be written back) */
-	BYTE	fsi_flag;		/* fsinfo dirty flag (1:must be written back) */
-	WORD	id;				/* File system mount ID */
-	WORD	n_rootdir;		/* Number of root directory entries (FAT12/16) */
-#if _MAX_SS != 512
-	WORD	ssize;			/* Bytes per sector (512, 1024, 2048 or 4096) */
-#endif
-#if _FS_REENTRANT
-	_SYNC_t	sobj;			/* Identifier of sync object */
-#endif
-#if !_FS_READONLY
-	DWORD	last_clust;		/* Last allocated cluster */
-	DWORD	free_clust;		/* Number of free clusters */
-	DWORD	fsi_sector;		/* fsinfo sector (FAT32) */
-#endif
-#if _FS_RPATH
-	DWORD	cdir;			/* Current directory start cluster (0:root) */
-#endif
-	DWORD	n_fatent;		/* Number of FAT entries (= number of clusters + 2) */
-	DWORD	fsize;			/* Sectors per FAT */
-	DWORD	fatbase;		/* FAT start sector */
-	DWORD	dirbase;		/* Root directory start sector (FAT32:Cluster#) */
-	DWORD	database;		/* Data start sector */
-	DWORD	winsect;		/* Current sector appearing in the win[] */
-	BYTE	win[_MAX_SS];	/* Disk access window for Directory, FAT (and Data on tiny cfg) */
-} FATFS;
-
-
-
-/* File object structure (FIL) */
-
-typedef struct {
-	FATFS*	fs;				/* Pointer to the related file system object */
-	WORD	id;				/* File system mount ID of the related file system object */
-	BYTE	flag;			/* File status flags */
-	BYTE	pad1;
-	DWORD	fptr;			/* File read/write pointer (0ed on file open) */
-	DWORD	fsize;			/* File size */
-	DWORD	sclust;			/* File data start cluster (0:no data cluster, always 0 when fsize is 0) */
-	DWORD	clust;			/* Current cluster of fpter */
-	DWORD	dsect;			/* Current data sector of fpter */
-#if !_FS_READONLY
-	DWORD	dir_sect;		/* Sector containing the directory entry */
-	BYTE*	dir_ptr;		/* Pointer to the directory entry in the window */
-#endif
-#if _USE_FASTSEEK
-	DWORD*	cltbl;			/* Pointer to the cluster link map table (null on file open) */
-#endif
-#if _FS_LOCK
-	UINT	lockid;			/* File lock ID (index of file semaphore table Files[]) */
-#endif
-#if !_FS_TINY
-	BYTE	buf[_MAX_SS];	/* File data read/write buffer */
-#endif
-} FIL;
-
-
-
-/* Directory object structure (DIR) */
-
-typedef struct {
-	FATFS*	fs;				/* Pointer to the owner file system object */
-	WORD	id;				/* Owner file system mount ID */
-	WORD	index;			/* Current read/write index number */
-	DWORD	sclust;			/* Table start cluster (0:Root dir) */
-	DWORD	clust;			/* Current cluster */
-	DWORD	sect;			/* Current sector */
-	BYTE*	dir;			/* Pointer to the current SFN entry in the win[] */
-	BYTE*	fn;				/* Pointer to the SFN (in/out) {file[8],ext[3],status[1]} */
-#if _USE_LFN
-	WCHAR*	lfn;			/* Pointer to the LFN working buffer */
-	WORD	lfn_idx;		/* Last matched LFN index number (0xFFFF:No LFN) */
-#endif
-} DIR;
-
-
-
-/* File status structure (FILINFO) */
-
-typedef struct {
-	DWORD	fsize;			/* File size */
-	WORD	fdate;			/* Last modified date */
-	WORD	ftime;			/* Last modified time */
-	BYTE	fattrib;		/* Attribute */
-	TCHAR	fname[13];		/* Short file name (8.3 format) */
-#if _USE_LFN
-	TCHAR*	lfname;			/* Pointer to the LFN buffer */
-	UINT 	lfsize;			/* Size of LFN buffer in TCHAR */
-#endif
-} FILINFO;
-
-
-
-/* File function return code (FRESULT) */
-
-typedef enum {
-	FR_OK = 0,				/* (0) Succeeded */
-	FR_DISK_ERR,			/* (1) A hard error occurred in the low level disk I/O layer */
-	FR_INT_ERR,				/* (2) Assertion failed */
-	FR_NOT_READY,			/* (3) The physical drive cannot work */
-	FR_NO_FILE,				/* (4) Could not find the file */
-	FR_NO_PATH,				/* (5) Could not find the path */
-	FR_INVALID_NAME,		/* (6) The path name format is invalid */
-	FR_DENIED,				/* (7) Access denied due to prohibited access or directory full */
-	FR_EXIST,				/* (8) Access denied due to prohibited access */
-	FR_INVALID_OBJECT,		/* (9) The file/directory object is invalid */
-	FR_WRITE_PROTECTED,		/* (10) The physical drive is write protected */
-	FR_INVALID_DRIVE,		/* (11) The logical drive number is invalid */
-	FR_NOT_ENABLED,			/* (12) The volume has no work area */
-	FR_NO_FILESYSTEM,		/* (13) There is no valid FAT volume */
-	FR_MKFS_ABORTED,		/* (14) The f_mkfs() aborted due to any parameter error */
-	FR_TIMEOUT,				/* (15) Could not get a grant to access the volume within defined period */
-	FR_LOCKED,				/* (16) The operation is rejected according to the file sharing policy */
-	FR_NOT_ENOUGH_CORE,		/* (17) LFN working buffer could not be allocated */
-	FR_TOO_MANY_OPEN_FILES,	/* (18) Number of open files > _FS_SHARE */
-	FR_INVALID_PARAMETER	/* (19) Given parameter is invalid */
-} FRESULT;
-
-
-
-/*--------------------------------------------------------------*/
-/* FatFs module application interface                           */
-
-FRESULT f_mount (BYTE, FATFS*);						/* Mount/Unmount a logical drive */
-FRESULT f_open (FIL*, const TCHAR*, BYTE);			/* Open or create a file */
-FRESULT f_read (FIL*, void*, UINT, UINT*);			/* Read data from a file */
-FRESULT f_lseek (FIL*, DWORD);						/* Move file pointer of a file object */
-FRESULT f_close (FIL*);								/* Close an open file object */
-FRESULT f_opendir (DIR*, const TCHAR*);				/* Open an existing directory */
-FRESULT f_readdir (DIR*, FILINFO*);					/* Read a directory item */
-FRESULT f_stat (const TCHAR*, FILINFO*);			/* Get file status */
-FRESULT f_write (FIL*, const void*, UINT, UINT*);	/* Write data to a file */
-FRESULT f_getfree (const TCHAR*, DWORD*, FATFS**);	/* Get number of free clusters on the drive */
-FRESULT f_truncate (FIL*);							/* Truncate file */
-FRESULT f_sync (FIL*);								/* Flush cached data of a writing file */
-FRESULT f_unlink (const TCHAR*);					/* Delete an existing file or directory */
-FRESULT	f_mkdir (const TCHAR*);						/* Create a new directory */
-FRESULT f_chmod (const TCHAR*, BYTE, BYTE);			/* Change attribute of the file/dir */
-FRESULT f_utime (const TCHAR*, const FILINFO*);		/* Change times-tamp of the file/dir */
-FRESULT f_rename (const TCHAR*, const TCHAR*);		/* Rename/Move a file or directory */
-FRESULT f_chdrive (BYTE);							/* Change current drive */
-FRESULT f_chdir (const TCHAR*);						/* Change current directory */
-FRESULT f_getcwd (TCHAR*, UINT);					/* Get current directory */
-FRESULT f_forward (FIL*, UINT(*)(const BYTE*,UINT), UINT, UINT*);	/* Forward data to the stream */
-FRESULT f_mkfs (BYTE, BYTE, UINT);					/* Create a file system on the drive */
-FRESULT	f_fdisk (BYTE, const DWORD[], void*);		/* Divide a physical drive into some partitions */
-int f_putc (TCHAR, FIL*);							/* Put a character to the file */
-int f_puts (const TCHAR*, FIL*);					/* Put a string to the file */
-int f_printf (FIL*, const TCHAR*, ...);				/* Put a formatted string to the file */
-TCHAR* f_gets (TCHAR*, int, FIL*);					/* Get a string from the file */
-
-#define f_eof(fp) (((fp)->fptr == (fp)->fsize) ? 1 : 0)
-#define f_error(fp) (((fp)->flag & FA__ERROR) ? 1 : 0)
-#define f_tell(fp) ((fp)->fptr)
-#define f_size(fp) ((fp)->fsize)
-
-#ifndef EOF
-#define EOF (-1)
-#endif
-
-
-
-
-/*--------------------------------------------------------------*/
-/* Additional user defined functions                            */
-
-/* RTC function */
-#if !_FS_READONLY
-DWORD get_fattime (void);
-#endif
-
-/* Unicode support functions */
-#if _USE_LFN						/* Unicode - OEM code conversion */
-WCHAR ff_convert (WCHAR, UINT);		/* OEM-Unicode bidirectional conversion */
-WCHAR ff_wtoupper (WCHAR);			/* Unicode upper-case conversion */
-#if _USE_LFN == 3					/* Memory functions */
-void* ff_memalloc (UINT);			/* Allocate memory block */
-void ff_memfree (void*);			/* Free memory block */
-#endif
-#endif
-
-/* Sync functions */
-#if _FS_REENTRANT
-int ff_cre_syncobj (BYTE, _SYNC_t*);/* Create a sync object */
-int ff_req_grant (_SYNC_t);			/* Lock sync object */
-void ff_rel_grant (_SYNC_t);		/* Unlock sync object */
-int ff_del_syncobj (_SYNC_t);		/* Delete a sync object */
-#endif
-
-
-
-
-/*--------------------------------------------------------------*/
-/* Flags and offset address                                     */
-
-
-/* File access control and file status flags (FIL.flag) */
-
-#define	FA_READ				0x01
-#define	FA_OPEN_EXISTING	0x00
-#define FA__ERROR			0x80
-
-#if !_FS_READONLY
-#define	FA_WRITE			0x02
-#define	FA_CREATE_NEW		0x04
-#define	FA_CREATE_ALWAYS	0x08
-#define	FA_OPEN_ALWAYS		0x10
-#define FA__WRITTEN			0x20
-#define FA__DIRTY			0x40
-#endif
-
-
-/* FAT sub type (FATFS.fs_type) */
-
-#define FS_FAT12	1
-#define FS_FAT16	2
-#define FS_FAT32	3
-
-
-/* File attribute bits for directory entry */
-
-#define	AM_RDO	0x01	/* Read only */
-#define	AM_HID	0x02	/* Hidden */
-#define	AM_SYS	0x04	/* System */
-#define	AM_VOL	0x08	/* Volume label */
-#define AM_LFN	0x0F	/* LFN entry */
-#define AM_DIR	0x10	/* Directory */
-#define AM_ARC	0x20	/* Archive */
-#define AM_MASK	0x3F	/* Mask of defined bits */
-
-
-/* Fast seek feature */
-#define CREATE_LINKMAP	0xFFFFFFFF
-
-
-
-/*--------------------------------*/
-/* Multi-byte word access macros  */
-
-#if _WORD_ACCESS == 1	/* Enable word access to the FAT structure */
-#define	LD_WORD(ptr)		(WORD)(*(WORD*)(BYTE*)(ptr))
-#define	LD_DWORD(ptr)		(DWORD)(*(DWORD*)(BYTE*)(ptr))
-#define	ST_WORD(ptr,val)	*(WORD*)(BYTE*)(ptr)=(WORD)(val)
-#define	ST_DWORD(ptr,val)	*(DWORD*)(BYTE*)(ptr)=(DWORD)(val)
-#else					/* Use byte-by-byte access to the FAT structure */
-#define	LD_WORD(ptr)		(WORD)(((WORD)*((BYTE*)(ptr)+1)<<8)|(WORD)*(BYTE*)(ptr))
-#define	LD_DWORD(ptr)		(DWORD)(((DWORD)*((BYTE*)(ptr)+3)<<24)|((DWORD)*((BYTE*)(ptr)+2)<<16)|((WORD)*((BYTE*)(ptr)+1)<<8)|*(BYTE*)(ptr))
-#define	ST_WORD(ptr,val)	*(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8)
-#define	ST_DWORD(ptr,val)	*(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8); *((BYTE*)(ptr)+2)=(BYTE)((DWORD)(val)>>16); *((BYTE*)(ptr)+3)=(BYTE)((DWORD)(val)>>24)
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _FATFS */
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/ffconf.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/ffconf.h
deleted file mode 100644
index 243a20fa22..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/ffconf.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*---------------------------------------------------------------------------/
-/  FatFs - FAT file system module configuration file  R0.09a (C)ChaN, 2012
-/----------------------------------------------------------------------------/
-/
-/ CAUTION! Do not forget to make clean the project after any changes to
-/ the configuration options.
-/
-/----------------------------------------------------------------------------*/
-#ifndef _FFCONF
-#define _FFCONF 4004	/* Revision ID */
-
-
-/*---------------------------------------------------------------------------/
-/ Function and Buffer Configurations
-/----------------------------------------------------------------------------*/
-
-#define	_FS_TINY	1		/* 0:Normal or 1:Tiny */
-/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system
-/  object instead of the sector buffer in the individual file object for file
-/  data transfer. This reduces memory consumption 512 bytes each file object. */
-
-
-#define _FS_READONLY	1	/* 0:Read/Write or 1:Read only */
-/* Setting _FS_READONLY to 1 defines read only configuration. This removes
-/  writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename,
-/  f_truncate and useless f_getfree. */
-
-
-#define _FS_MINIMIZE	2	/* 0 to 3 */
-/* The _FS_MINIMIZE option defines minimization level to remove some functions.
-/
-/   0: Full function.
-/   1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename
-/      are removed.
-/   2: f_opendir and f_readdir are removed in addition to 1.
-/   3: f_lseek is removed in addition to 2. */
-
-
-#define	_USE_STRFUNC	0	/* 0:Disable or 1-2:Enable */
-/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
-
-
-#define	_USE_MKFS	0		/* 0:Disable or 1:Enable */
-/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */
-
-
-#define	_USE_FORWARD	0	/* 0:Disable or 1:Enable */
-/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
-
-
-#define	_USE_FASTSEEK	0	/* 0:Disable or 1:Enable */
-/* To enable fast seek feature, set _USE_FASTSEEK to 1. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ Locale and Namespace Configurations
-/----------------------------------------------------------------------------*/
-
-#define _CODE_PAGE	932
-/* The _CODE_PAGE specifies the OEM code page to be used on the target system.
-/  Incorrect setting of the code page can cause a file open failure.
-/
-/   932  - Japanese Shift-JIS (DBCS, OEM, Windows)
-/   936  - Simplified Chinese GBK (DBCS, OEM, Windows)
-/   949  - Korean (DBCS, OEM, Windows)
-/   950  - Traditional Chinese Big5 (DBCS, OEM, Windows)
-/   1250 - Central Europe (Windows)
-/   1251 - Cyrillic (Windows)
-/   1252 - Latin 1 (Windows)
-/   1253 - Greek (Windows)
-/   1254 - Turkish (Windows)
-/   1255 - Hebrew (Windows)
-/   1256 - Arabic (Windows)
-/   1257 - Baltic (Windows)
-/   1258 - Vietnam (OEM, Windows)
-/   437  - U.S. (OEM)
-/   720  - Arabic (OEM)
-/   737  - Greek (OEM)
-/   775  - Baltic (OEM)
-/   850  - Multilingual Latin 1 (OEM)
-/   858  - Multilingual Latin 1 + Euro (OEM)
-/   852  - Latin 2 (OEM)
-/   855  - Cyrillic (OEM)
-/   866  - Russian (OEM)
-/   857  - Turkish (OEM)
-/   862  - Hebrew (OEM)
-/   874  - Thai (OEM, Windows)
-/	1    - ASCII only (Valid for non LFN cfg.)
-*/
-
-
-#define	_USE_LFN	0		/* 0 to 3 */
-#define	_MAX_LFN	255		/* Maximum LFN length to handle (12 to 255) */
-/* The _USE_LFN option switches the LFN support.
-/
-/   0: Disable LFN feature. _MAX_LFN and _LFN_UNICODE have no effect.
-/   1: Enable LFN with static working buffer on the BSS. Always NOT reentrant.
-/   2: Enable LFN with dynamic working buffer on the STACK.
-/   3: Enable LFN with dynamic working buffer on the HEAP.
-/
-/  The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. To enable LFN,
-/  Unicode handling functions ff_convert() and ff_wtoupper() must be added
-/  to the project. When enable to use heap, memory control functions
-/  ff_memalloc() and ff_memfree() must be added to the project. */
-
-
-#define	_LFN_UNICODE	0	/* 0:ANSI/OEM or 1:Unicode */
-/* To switch the character code set on FatFs API to Unicode,
-/  enable LFN feature and set _LFN_UNICODE to 1. */
-
-
-#define _FS_RPATH		0	/* 0 to 2 */
-/* The _FS_RPATH option configures relative path feature.
-/
-/   0: Disable relative path feature and remove related functions.
-/   1: Enable relative path. f_chdrive() and f_chdir() are available.
-/   2: f_getcwd() is available in addition to 1.
-/
-/  Note that output of the f_readdir function is affected by this option. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ Physical Drive Configurations
-/----------------------------------------------------------------------------*/
-
-#define _VOLUMES	1
-/* Number of volumes (logical drives) to be used. */
-
-
-#define	_MAX_SS		512		/* 512, 1024, 2048 or 4096 */
-/* Maximum sector size to be handled.
-/  Always set 512 for memory card and hard disk but a larger value may be
-/  required for on-board flash memory, floppy disk and optical disk.
-/  When _MAX_SS is larger than 512, it configures FatFs to variable sector size
-/  and GET_SECTOR_SIZE command must be implemented to the disk_ioctl function. */
-
-
-#define	_MULTI_PARTITION	0	/* 0:Single partition, 1/2:Enable multiple partition */
-/* When set to 0, each volume is bound to the same physical drive number and
-/ it can mount only first primary partition. When it is set to 1, each volume
-/ is tied to the partitions listed in VolToPart[]. */
-
-
-#define	_USE_ERASE	0	/* 0:Disable or 1:Enable */
-/* To enable sector erase feature, set _USE_ERASE to 1. CTRL_ERASE_SECTOR command
-/  should be added to the disk_ioctl function. */
-
-
-
-/*---------------------------------------------------------------------------/
-/ System Configurations
-/----------------------------------------------------------------------------*/
-
-#define _WORD_ACCESS	1	/* 0 or 1 */
-/* Set 0 first and it is always compatible with all platforms. The _WORD_ACCESS
-/  option defines which access method is used to the word data on the FAT volume.
-/
-/   0: Byte-by-byte access.
-/   1: Word access. Do not choose this unless following condition is met.
-/
-/  When the byte order on the memory is big-endian or address miss-aligned word
-/  access results incorrect behavior, the _WORD_ACCESS must be set to 0.
-/  If it is not the case, the value can also be set to 1 to improve the
-/  performance and code size. */
-
-
-/* A header file that defines sync object types on the O/S, such as
-/  windows.h, ucos_ii.h and semphr.h, must be included prior to ff.h. */
-
-#define _FS_REENTRANT	0		/* 0:Disable or 1:Enable */
-#define _FS_TIMEOUT		1000	/* Timeout period in unit of time ticks */
-#define	_SYNC_t			HANDLE	/* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */
-
-/* The _FS_REENTRANT option switches the reentrancy (thread safe) of the FatFs module.
-/
-/   0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect.
-/   1: Enable reentrancy. Also user provided synchronization handlers,
-/      ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj
-/      function must be added to the project. */
-
-
-#define	_FS_LOCK	0	/* 0:Disable or >=1:Enable */
-/* To enable file lock control feature, set _FS_LOCK to 1 or greater.
-   The value defines how many files can be opened simultaneously. */
-
-
-#endif /* _FFCONFIG */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/integer.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/integer.h
deleted file mode 100644
index 5408fe6b3e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/FATFs/integer.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*-------------------------------------------*/
-/* Integer type definitions for FatFs module */
-/*-------------------------------------------*/
-
-#ifndef _INTEGER
-#define _INTEGER
-
-#ifdef _WIN32	/* FatFs development platform */
-
-#include <windows.h>
-#include <tchar.h>
-
-#else			/* Embedded platform */
-
-/* These types must be 16-bit, 32-bit or larger integer */
-typedef int				INT;
-typedef unsigned int	UINT;
-
-/* These types must be 8-bit integer */
-typedef char			CHAR;
-typedef unsigned char	UCHAR;
-typedef unsigned char	BYTE;
-
-/* These types must be 16-bit integer */
-typedef short			SHORT;
-typedef unsigned short	USHORT;
-typedef unsigned short	WORD;
-typedef unsigned short	WCHAR;
-
-/* These types must be 32-bit integer */
-typedef long			LONG;
-typedef unsigned long	ULONG;
-typedef unsigned long	DWORD;
-
-#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/HTTPServerApp.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/HTTPServerApp.c
deleted file mode 100644
index b9cb3efa6d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/HTTPServerApp.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Simple HTTP Webserver Application. When connected to the uIP stack,
- *  this will serve out files to HTTP clients on port 80.
- */
-
-#define  INCLUDE_FROM_HTTPSERVERAPP_C
-#include "HTTPServerApp.h"
-
-/** HTTP server response header, for transmission before the page contents. This indicates to the host that a page exists at the
- *  given location, and gives extra connection information.
- */
-const char PROGMEM HTTP200Header[] = "HTTP/1.1 200 OK\r\n"
-                                     "Server: LUFA " LUFA_VERSION_STRING "\r\n"
-                                     "Connection: close\r\n"
-                                     "MIME-version: 1.0\r\n"
-                                     "Content-Type: ";
-
-/** HTTP server response header, for transmission before a resource not found error. This indicates to the host that the given
- *  URL is invalid, and gives extra error information.
- */
-const char PROGMEM HTTP404Header[] = "HTTP/1.1 404 Not Found\r\n"
-                                     "Server: LUFA " LUFA_VERSION_STRING "\r\n"
-                                     "Connection: close\r\n"
-                                     "MIME-version: 1.0\r\n"
-                                     "Content-Type: text/plain\r\n\r\n"
-                                     "Error 404: File Not Found: /";
-
-/** Default filename to fetch when a directory is requested */
-const char PROGMEM DefaultDirFileName[] = "index.htm";
-
-/** Default MIME type sent if no other MIME type can be determined. */
-const char PROGMEM DefaultMIMEType[] = "text/plain";
-
-/** List of MIME types for each supported file extension. */
-const MIME_Type_t MIMETypes[] =
-	{
-		{.Extension = "htm", .MIMEType = "text/html"},
-		{.Extension = "jpg", .MIMEType = "image/jpeg"},
-		{.Extension = "gif", .MIMEType = "image/gif"},
-		{.Extension = "bmp", .MIMEType = "image/bmp"},
-		{.Extension = "png", .MIMEType = "image/png"},
-		{.Extension = "ico", .MIMEType = "image/x-icon"},
-		{.Extension = "exe", .MIMEType = "application/octet-stream"},
-		{.Extension = "gz",  .MIMEType = "application/x-gzip"},
-		{.Extension = "zip", .MIMEType = "application/zip"},
-		{.Extension = "pdf", .MIMEType = "application/pdf"},
-	};
-
-/** FATFs structure to hold the internal state of the FAT driver for the Dataflash contents. */
-FATFS DiskFATState;
-
-
-/** Initialization function for the simple HTTP webserver. */
-void HTTPServerApp_Init(void)
-{
-	/* Listen on port 80 for HTTP connections from hosts */
-	uip_listen(HTONS(HTTP_SERVER_PORT));
-
-	/* Mount the Dataflash disk via FatFS */
-	f_mount(0, &DiskFATState);
-}
-
-/** uIP stack application callback for the simple HTTP webserver. This function must be called each time the
- *  TCP/IP stack needs a TCP packet to be processed.
- */
-void HTTPServerApp_Callback(void)
-{
-	uip_tcp_appstate_t* const AppState = &uip_conn->appstate;
-
-	if (uip_aborted() || uip_timedout() || uip_closed())
-	{
-		/* Lock to the closed state so that no further processing will occur on the connection */
-		AppState->HTTPServer.CurrentState  = WEBSERVER_STATE_Closing;
-		AppState->HTTPServer.NextState     = WEBSERVER_STATE_Closing;
-	}
-
-	if (uip_connected())
-	{
-		/* New connection - initialize connection state values */
-		AppState->HTTPServer.CurrentState  = WEBSERVER_STATE_OpenRequestedFile;
-		AppState->HTTPServer.NextState     = WEBSERVER_STATE_OpenRequestedFile;
-		AppState->HTTPServer.FileOpen      = false;
-		AppState->HTTPServer.ACKedFilePos  = 0;
-		AppState->HTTPServer.SentChunkSize = 0;
-	}
-
-	if (uip_acked())
-	{
-		/* Add the amount of ACKed file data to the total sent file bytes counter */
-		AppState->HTTPServer.ACKedFilePos += AppState->HTTPServer.SentChunkSize;
-
-		/* Progress to the next state once the current state's data has been ACKed */
-		AppState->HTTPServer.CurrentState = AppState->HTTPServer.NextState;
-	}
-
-	if (uip_rexmit())
-	{
-		/* Return file pointer to the last ACKed position */
-		f_lseek(&AppState->HTTPServer.FileHandle, AppState->HTTPServer.ACKedFilePos);
-	}
-
-	if (uip_rexmit() || uip_acked() || uip_newdata() || uip_connected() || uip_poll())
-	{
-		switch (AppState->HTTPServer.CurrentState)
-		{
-			case WEBSERVER_STATE_OpenRequestedFile:
-				HTTPServerApp_OpenRequestedFile();
-				break;
-			case WEBSERVER_STATE_SendResponseHeader:
-				HTTPServerApp_SendResponseHeader();
-				break;
-			case WEBSERVER_STATE_SendData:
-				HTTPServerApp_SendData();
-				break;
-			case WEBSERVER_STATE_Closing:
-				/* Connection is being terminated for some reason - close file handle */
-				f_close(&AppState->HTTPServer.FileHandle);
-				AppState->HTTPServer.FileOpen = false;
-
-				/* If connection is not already closed, close it */
-				uip_close();
-
-				AppState->HTTPServer.CurrentState = WEBSERVER_STATE_Closed;
-				AppState->HTTPServer.NextState    = WEBSERVER_STATE_Closed;
-				break;
-		}
-	}
-}
-
-/** HTTP Server State handler for the Request Process state. This state manages the processing of incoming HTTP
- *  GET requests to the server from the receiving HTTP client.
- */
-static void HTTPServerApp_OpenRequestedFile(void)
-{
-	uip_tcp_appstate_t* const AppState    = &uip_conn->appstate;
-	char*               const AppData     = (char*)uip_appdata;
-
-	/* No HTTP header received from the client, abort processing */
-	if (!(uip_newdata()))
-	  return;
-
-	char* RequestToken      = strtok(AppData, " ");
-	char* RequestedFileName = strtok(NULL, " ");
-
-	/* Must be a GET request, abort otherwise */
-	if (strcmp_P(RequestToken, PSTR("GET")) != 0)
-	{
-		uip_abort();
-		return;
-	}
-
-	/* Copy over the requested filename */
-	strlcpy(AppState->HTTPServer.FileName, &RequestedFileName[1], sizeof(AppState->HTTPServer.FileName));
-
-	/* Determine the length of the URI so that it can be checked to see if it is a directory */
-	uint8_t FileNameLen = strlen(AppState->HTTPServer.FileName);
-
-	/* If the URI is a directory, append the default filename */
-	if ((AppState->HTTPServer.FileName[FileNameLen - 1] == '/') || !(FileNameLen))
-	{
-		strlcpy_P(&AppState->HTTPServer.FileName[FileNameLen], DefaultDirFileName,
-		          (sizeof(AppState->HTTPServer.FileName) - FileNameLen));
-	}
-
-	/* Try to open the file from the Dataflash disk */
-	AppState->HTTPServer.FileOpen     = (f_open(&AppState->HTTPServer.FileHandle, AppState->HTTPServer.FileName,
-	                                            (FA_OPEN_EXISTING | FA_READ)) == FR_OK);
-
-	/* Lock to the SendResponseHeader state until connection terminated */
-	AppState->HTTPServer.CurrentState = WEBSERVER_STATE_SendResponseHeader;
-	AppState->HTTPServer.NextState    = WEBSERVER_STATE_SendResponseHeader;
-}
-
-/** HTTP Server State handler for the HTTP Response Header Send state. This state manages the transmission of
- *  the HTTP response header to the receiving HTTP client.
- */
-static void HTTPServerApp_SendResponseHeader(void)
-{
-	uip_tcp_appstate_t* const AppState    = &uip_conn->appstate;
-	char*               const AppData     = (char*)uip_appdata;
-
-	char* Extension     = strpbrk(AppState->HTTPServer.FileName, ".");
-	bool  FoundMIMEType = false;
-
-	/* If the file isn't already open, it wasn't found - send back a 404 error response and abort */
-	if (!(AppState->HTTPServer.FileOpen))
-	{
-		/* Copy over the HTTP 404 response header and send it to the receiving client */
-		strcpy_P(AppData, HTTP404Header);
-		strcat(AppData, AppState->HTTPServer.FileName);
-		uip_send(AppData, strlen(AppData));
-
-		AppState->HTTPServer.NextState = WEBSERVER_STATE_Closing;
-		return;
-	}
-
-	/* Copy over the HTTP 200 response header and send it to the receiving client */
-	strcpy_P(AppData, HTTP200Header);
-
-	/* Check to see if a MIME type for the requested file's extension was found */
-	if (Extension != NULL)
-	{
-		/* Look through the MIME type list, copy over the required MIME type if found */
-		for (uint8_t i = 0; i < (sizeof(MIMETypes) / sizeof(MIMETypes[0])); i++)
-		{
-			if (strcmp(&Extension[1], MIMETypes[i].Extension) == 0)
-			{
-				strcat(AppData, MIMETypes[i].MIMEType);
-				FoundMIMEType = true;
-				break;
-			}
-		}
-	}
-
-	/* Check if a MIME type was found and copied to the output buffer */
-	if (!(FoundMIMEType))
-	{
-		/* MIME type not found - copy over the default MIME type */
-		strcat_P(AppData, DefaultMIMEType);
-	}
-
-	/* Add the end-of-line terminator and end-of-headers terminator after the MIME type */
-	strcat_P(AppData, PSTR("\r\n\r\n"));
-
-	/* Send the MIME header to the receiving client */
-	uip_send(AppData, strlen(AppData));
-
-	/* When the MIME header is ACKed, progress to the data send stage */
-	AppState->HTTPServer.NextState = WEBSERVER_STATE_SendData;
-}
-
-/** HTTP Server State handler for the Data Send state. This state manages the transmission of file chunks
- *  to the receiving HTTP client.
- */
-static void HTTPServerApp_SendData(void)
-{
-	uip_tcp_appstate_t* const AppState    = &uip_conn->appstate;
-	char*               const AppData     = (char*)uip_appdata;
-
-	/* Get the maximum segment size for the current packet */
-	uint16_t MaxChunkSize = uip_mss();
-
-	/* Read the next chunk of data from the open file */
-	f_read(&AppState->HTTPServer.FileHandle, AppData, MaxChunkSize, &AppState->HTTPServer.SentChunkSize);
-
-	/* Send the next file chunk to the receiving client */
-	uip_send(AppData, AppState->HTTPServer.SentChunkSize);
-
-	/* Check if we are at the last chunk of the file, if so next ACK should close the connection */
-	if (MaxChunkSize != AppState->HTTPServer.SentChunkSize)
-	  AppState->HTTPServer.NextState = WEBSERVER_STATE_Closing;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/HTTPServerApp.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/HTTPServerApp.h
deleted file mode 100644
index 6e9ada00cd..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/HTTPServerApp.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for HTTPServerApp.c.
- */
-
-#ifndef _HTTPSERVER_APP_H_
-#define _HTTPSERVER_APP_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-		#include <string.h>
-
-		#include <LUFA/Version.h>
-
-		#include "Config/AppConfig.h"
-
-		#include <uip.h>
-		#include <ff.h>
-
-	/* Enums: */
-		/** States for each HTTP connection to the webserver. */
-		enum Webserver_States_t
-		{
-			WEBSERVER_STATE_OpenRequestedFile, /**< Currently opening requested file */
-			WEBSERVER_STATE_SendResponseHeader, /**< Currently sending HTTP response headers to the client */
-			WEBSERVER_STATE_SendData, /**< Currently sending HTTP page data to the client */
-			WEBSERVER_STATE_Closing, /**< Ready to close the connection to the client */
-			WEBSERVER_STATE_Closed, /**< Connection closed after all data sent */
-		};
-
-	/* Type Defines: */
-		/** Type define for a MIME type handler. */
-		typedef struct
-		{
-			char* Extension; /**< File extension (no leading '.' character) */
-			char* MIMEType;  /**< Appropriate MIME type to send when the extension is encountered */
-		} MIME_Type_t;
-
-	/* Macros: */
-		/** TCP listen port for incoming HTTP traffic. */
-		#define HTTP_SERVER_PORT  80
-
-	/* Function Prototypes: */
-		void HTTPServerApp_Init(void);
-		void HTTPServerApp_Callback(void);
-
-		#if defined(INCLUDE_FROM_HTTPSERVERAPP_C)
-			static void HTTPServerApp_OpenRequestedFile(void);
-			static void HTTPServerApp_SendResponseHeader(void);
-			static void HTTPServerApp_SendData(void);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/SCSI.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/SCSI.c
deleted file mode 100644
index 315f2e3a3d..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/SCSI.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  SCSI command processing routines, for SCSI commands issued by the host. Mass Storage
- *  devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information,
- *  which wrap around standard SCSI device commands for controlling the actual storage medium.
- */
-
-#define  INCLUDE_FROM_SCSI_C
-#include "SCSI.h"
-
-/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
- *  features and capabilities.
- */
-static const SCSI_Inquiry_Response_t InquiryData =
-	{
-		.DeviceType          = DEVICE_TYPE_BLOCK,
-		.PeripheralQualifier = 0,
-
-		.Removable           = true,
-
-		.Version             = 0,
-
-		.ResponseDataFormat  = 2,
-		.NormACA             = false,
-		.TrmTsk              = false,
-		.AERC                = false,
-
-		.AdditionalLength    = 0x1F,
-
-		.SoftReset           = false,
-		.CmdQue              = false,
-		.Linked              = false,
-		.Sync                = false,
-		.WideBus16Bit        = false,
-		.WideBus32Bit        = false,
-		.RelAddr             = false,
-
-		.VendorID            = "LUFA",
-		.ProductID           = "Dataflash Disk",
-		.RevisionID          = {'0','.','0','0'},
-	};
-
-/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE
- *  command is issued. This gives information on exactly why the last command failed to complete.
- */
-static SCSI_Request_Sense_Response_t SenseData =
-	{
-		.ResponseCode        = 0x70,
-		.AdditionalLength    = 0x0A,
-	};
-
-
-/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches
- *  to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns
- *  a command failure due to a ILLEGAL REQUEST.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise
- */
-bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	bool CommandSuccess = false;
-
-	/* Run the appropriate SCSI command hander function based on the passed command */
-	switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0])
-	{
-		case SCSI_CMD_INQUIRY:
-			CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_REQUEST_SENSE:
-			CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_READ_CAPACITY_10:
-			CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_SEND_DIAGNOSTIC:
-			CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_WRITE_10:
-			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE);
-			break;
-		case SCSI_CMD_READ_10:
-			CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ);
-			break;
-		case SCSI_CMD_MODE_SENSE_6:
-			CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo);
-			break;
-		case SCSI_CMD_START_STOP_UNIT:
-		case SCSI_CMD_TEST_UNIT_READY:
-		case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
-		case SCSI_CMD_VERIFY_10:
-			/* These commands should just succeed, no handling required */
-			CommandSuccess = true;
-			MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
-			break;
-		default:
-			/* Update the SENSE key to reflect the invalid command */
-			SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		                   SCSI_ASENSE_INVALID_COMMAND,
-		                   SCSI_ASENSEQ_NO_QUALIFIER);
-			break;
-	}
-
-	/* Check if command was successfully processed */
-	if (CommandSuccess)
-	{
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD,
-		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return true;
-	}
-
-	return false;
-}
-
-/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features
- *  and capabilities to the host.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint16_t AllocationLength  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]);
-	uint16_t BytesTransferred  = MIN(AllocationLength, sizeof(InquiryData));
-
-	/* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */
-	if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||
-	     MSInterfaceInfo->State.CommandBlock.SCSICommandData[2])
-	{
-		/* Optional but unsupported bits set - update the SENSE key and fail the request */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL);
-
-	/* Pad out remaining bytes with 0x00 */
-	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
-
-	/* Finalize the stream transfer to send the last packet */
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command,
- *  including the error code and additional error information so that the host can determine why a command failed to complete.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint8_t  AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];
-	uint8_t  BytesTransferred = MIN(AllocationLength, sizeof(SenseData));
-
-	Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL);
-	Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity
- *  on the selected Logical Unit (drive), as a number of OS-sized blocks.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	uint32_t LastBlockAddressInLUN = (VIRTUAL_MEMORY_BLOCKS - 1);
-	uint32_t MediaBlockSize        = VIRTUAL_MEMORY_BLOCK_SIZE;
-
-	Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL);
-	Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL);
-	Endpoint_ClearIN();
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the
- *  board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is
- *  supported.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	/* Check to see if the SELF TEST bit is not set */
-	if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2)))
-	{
-		/* Only self-test supported - update SENSE key and fail the command */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_INVALID_FIELD_IN_CDB,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Check to see if all attached Dataflash ICs are functional */
-	if (!(DataflashManager_CheckDataflashOperation()))
-	{
-		/* Update SENSE key with a hardware error condition and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR,
-		               SCSI_ASENSE_NO_ADDITIONAL_INFORMATION,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Succeed the command and update the bytes transferred counter */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0;
-
-	return true;
-}
-
-/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address
- *  and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual
- *  reading and writing of the data.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *  \param[in] IsDataRead  Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-                                      const bool IsDataRead)
-{
-	uint32_t BlockAddress;
-	uint16_t TotalBlocks;
-
-	/* Check if the disk is write protected or not */
-	if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY)
-	{
-		/* Block address is invalid, update SENSE key and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT,
-		               SCSI_ASENSE_WRITE_PROTECTED,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */
-	BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]);
-
-	/* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */
-	TotalBlocks  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]);
-
-	/* Check if the block address is outside the maximum allowable value for the LUN */
-	if (BlockAddress >= VIRTUAL_MEMORY_BLOCKS)
-	{
-		/* Block address is invalid, update SENSE key and return command fail */
-		SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST,
-		               SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE,
-		               SCSI_ASENSEQ_NO_QUALIFIER);
-
-		return false;
-	}
-
-	/* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */
-	if (IsDataRead == DATA_READ)
-	  DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
-	else
-	  DataflashManager_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks);
-
-	/* Update the bytes transferred counter and succeed the command */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE);
-
-	return true;
-}
-
-/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about
- *  the SCSI device, as well as the device's Write Protect status.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
- *
- *  \return Boolean \c true if the command completed successfully, \c false otherwise.
- */
-static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	/* Send an empty header response with the Write Protect flag status */
-	Endpoint_Write_8(0x00);
-	Endpoint_Write_8(0x00);
-	Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00);
-	Endpoint_Write_8(0x00);
-	Endpoint_ClearIN();
-
-	/* Update the bytes transferred counter and succeed the command */
-	MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4;
-
-	return true;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/SCSI.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/SCSI.h
deleted file mode 100644
index 53274dd892..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/SCSI.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for SCSI.c.
- */
-
-#ifndef _SCSI_H_
-#define _SCSI_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "../Descriptors.h"
-		#include "DataflashManager.h"
-
-	/* Macros: */
-		/** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This
-		 *  is for convenience, as it allows for all three sense values (returned upon request to the host to give information about
-		 *  the last command failure) in a quick and easy manner.
-		 *
-		 *  \param[in] Key    New SCSI sense key to set the sense code to
-		 *  \param[in] Acode  New SCSI additional sense key to set the additional sense code to
-		 *  \param[in] Aqual  New SCSI additional sense key qualifier to set the additional sense qualifier code to
-		 */
-		#define SCSI_SET_SENSE(Key, Acode, Aqual)  do { SenseData.SenseKey                 = (Key);   \
-		                                                SenseData.AdditionalSenseCode      = (Acode); \
-		                                                SenseData.AdditionalSenseQualifier = (Aqual); } while (0)
-
-		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */
-		#define DATA_READ           true
-
-		/** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */
-		#define DATA_WRITE          false
-
-		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */
-		#define DEVICE_TYPE_BLOCK   0x00
-
-		/** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */
-		#define DEVICE_TYPE_CDROM   0x05
-
-	/* Function Prototypes: */
-		bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-
-		#if defined(INCLUDE_FROM_SCSI_C)
-			static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-			static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo,
-			                                      const bool IsDataRead);
-			static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/TELNETServerApp.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/TELNETServerApp.c
deleted file mode 100644
index a05cd286f8..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/TELNETServerApp.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  TELNET Webserver Application. When connected to the uIP stack,
- *  this will serve out raw TELNET to the client on port 23.
- */
-
-#define  INCLUDE_FROM_TELNETSERVERAPP_C
-#include "TELNETServerApp.h"
-
-#if defined(ENABLE_TELNET_SERVER) || defined(__DOXYGEN__)
-
-/** Welcome message to send to a TELNET client when a connection is first made. */
-const char PROGMEM WelcomeHeader[] = "********************************************\r\n"
-                                     "*       LUFA uIP Webserver (TELNET)        *\r\n"
-                                     "********************************************\r\n";
-
-/** Main TELNET menu, giving the user the list of available commands they may issue */
-const char PROGMEM TELNETMenu[] = "\r\n"
-                                  "  == Available Commands: ==\r\n"
-                                  "     c) List Active TCP Connections\r\n"
-                                  "  =========================\r\n"
-                                  "\r\n>";
-
-/** Header to print before the current connections are printed to the client */
-const char PROGMEM CurrentConnectionsHeader[] = "\r\n* Current TCP Connections: *\r\n";
-
-/** Initialization function for the simple TELNET webserver. */
-void TELNETServerApp_Init(void)
-{
-	/* Listen on port 23 for TELNET connections from hosts */
-	uip_listen(HTONS(TELNET_SERVER_PORT));
-}
-
-/** uIP stack application callback for the TELNET server. This function must be called each time the
- *  TCP/IP stack needs a TCP packet to be processed.
- */
-void TELNETServerApp_Callback(void)
-{
-	uip_tcp_appstate_t* const AppState   = &uip_conn->appstate;
-	char*               const AppData    = (char*)uip_appdata;
-
-	if (uip_connected())
-	{
-		/* New connection - initialize connection state values */
-		AppState->TELNETServer.CurrentState = TELNET_STATE_SendHeader;
-	}
-
-	if (uip_acked())
-	{
-		/* Progress to the next state once the current state's data has been ACKed */
-		AppState->TELNETServer.CurrentState = AppState->TELNETServer.NextState;
-	}
-
-	if (uip_rexmit() || uip_acked() || uip_newdata() || uip_connected() || uip_poll())
-	{
-		switch (AppState->TELNETServer.CurrentState)
-		{
-			case TELNET_STATE_SendHeader:
-				/* Copy over and send the TELNET welcome message upon first connection */
-				strcpy_P(AppData, WelcomeHeader);
-				uip_send(AppData, strlen(AppData));
-
-				AppState->TELNETServer.NextState = TELNET_STATE_SendMenu;
-				break;
-			case TELNET_STATE_SendMenu:
-				/* Copy over and send the TELNET menu to the client */
-				strcpy_P(AppData, TELNETMenu);
-				uip_send(AppData, strlen(AppData));
-
-				AppState->TELNETServer.NextState = TELNET_STATE_GetCommand;
-				break;
-			case TELNET_STATE_GetCommand:
-				if (!(uip_datalen()))
-				  break;
-
-				/* Save the issued command for later processing */
-				AppState->TELNETServer.IssuedCommand = AppData[0];
-
-				AppState->TELNETServer.CurrentState  = TELNET_STATE_SendResponse;
-				break;
-			case TELNET_STATE_SendResponse:
-				/* Determine which command was issued, perform command processing */
-				switch (AppState->TELNETServer.IssuedCommand)
-				{
-					case 'c':
-						TELNETServerApp_DisplayTCPConnections();
-						break;
-					default:
-						strcpy_P(AppData, PSTR("Invalid Command.\r\n"));
-						uip_send(AppData, strlen(AppData));
-						break;
-				}
-
-				AppState->TELNETServer.NextState = TELNET_STATE_SendMenu;
-				break;
-		}
-	}
-}
-
-/** Sends a list of active TCP connections to the TELNET client. */
-static void TELNETServerApp_DisplayTCPConnections(void)
-{
-	char* const AppData    = (char*)uip_appdata;
-
-	strcpy_P(AppData, CurrentConnectionsHeader);
-
-	uint16_t ResponseLen     = strlen(AppData);
-	uint8_t  ActiveConnCount = 0;
-
-	/* Loop through the complete uIP TCP connections list, looking for active connections */
-	for (uint8_t i = 0; i < UIP_CONNS; i++)
-	{
-		struct uip_conn* CurrConnection = &uip_conns[i];
-
-		/* If the connection is not closed, it is active and must be added to the out buffer */
-		if (CurrConnection->tcpstateflags != UIP_CLOSED)
-		{
-			/* Add the current connection's details to the out buffer */
-			ResponseLen += sprintf_P(&AppData[ResponseLen], PSTR("%u) %d.%d.%d.%d (Local Port %u <=> Remote Port %u)\r\n"),
-			                         ++ActiveConnCount,
-			                         CurrConnection->ripaddr.u8[0],
-			                         CurrConnection->ripaddr.u8[1],
-			                         CurrConnection->ripaddr.u8[2],
-			                         CurrConnection->ripaddr.u8[3],
-			                         HTONS(CurrConnection->lport), HTONS(CurrConnection->rport));
-		}
-	}
-
-	uip_send(AppData, ResponseLen);
-}
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/TELNETServerApp.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/TELNETServerApp.h
deleted file mode 100644
index ac2a836543..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/TELNETServerApp.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for TELNETServerApp.c.
- */
-
-#ifndef _TELNETSERVER_APP_H_
-#define _TELNETSERVER_APP_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-		#include <string.h>
-		#include <stdio.h>
-
-		#include <uip.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** TCP listen port for incoming TELNET traffic. */
-		#define TELNET_SERVER_PORT  23
-
-	/* Enums: */
-		/** States for each TELNET connection to the server. */
-		enum TELNET_States_t
-		{
-			TELNET_STATE_SendHeader, /**< Currently sending welcome header to the client */
-			TELNET_STATE_SendMenu, /**< Currently sending the command list menu to the client */
-			TELNET_STATE_GetCommand, /**< Currently waiting for a command from the client */
-			TELNET_STATE_SendResponse, /**< Processing the issued command and sending a response */
-		};
-
-	/* Function Prototypes: */
-		void TELNETServerApp_Init(void);
-		void TELNETServerApp_Callback(void);
-
-		#if defined(INCLUDE_FROM_TELNETSERVERAPP_C)
-			static void TELNETServerApp_DisplayTCPConnections(void);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uIPManagement.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uIPManagement.c
deleted file mode 100644
index c9cbba7c51..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uIPManagement.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  uIP Management functions. This file contains the functions and globals needed to maintain the uIP
- *  stack once an RNDIS device has been attached to the system.
- */
-
-#define  INCLUDE_FROM_UIPMANAGEMENT_C
-#include "uIPManagement.h"
-
-/** Connection timer, to retain the time elapsed since the last time the uIP connections were managed. */
-static struct timer ConnectionTimer;
-
-/** ARP timer, to retain the time elapsed since the ARP cache was last updated. */
-static struct timer ARPTimer;
-
-/** MAC address of the RNDIS device, when enumerated. */
-struct uip_eth_addr MACAddress;
-
-
-/** Configures the uIP stack ready for network traffic processing. */
-void uIPManagement_Init(void)
-{
-	/* uIP Timing Initialization */
-	clock_init();
-	timer_set(&ConnectionTimer, CLOCK_SECOND / 2);
-	timer_set(&ARPTimer, CLOCK_SECOND * 10);
-
-	/* uIP Stack Initialization */
-	uip_init();
-	uip_arp_init();
-
-	/* DHCP/Server IP Settings Initialization */
-	if (USB_CurrentMode == USB_MODE_Device)
-	{
-		MACAddress.addr[0] = SERVER_MAC_ADDRESS[0];
-		MACAddress.addr[1] = SERVER_MAC_ADDRESS[1];
-		MACAddress.addr[2] = SERVER_MAC_ADDRESS[2];
-		MACAddress.addr[3] = SERVER_MAC_ADDRESS[3];
-		MACAddress.addr[4] = SERVER_MAC_ADDRESS[4];
-		MACAddress.addr[5] = SERVER_MAC_ADDRESS[5];
-
-		#if defined(ENABLE_DHCP_SERVER)
-		DHCPServerApp_Init();
-		#endif
-
-		uip_ipaddr_t IPAddress, Netmask, GatewayIPAddress;
-		uip_ipaddr(&IPAddress,        DEVICE_IP_ADDRESS[0], DEVICE_IP_ADDRESS[1], DEVICE_IP_ADDRESS[2], DEVICE_IP_ADDRESS[3]);
-		uip_ipaddr(&Netmask,          DEVICE_NETMASK[0],    DEVICE_NETMASK[1],    DEVICE_NETMASK[2],    DEVICE_NETMASK[3]);
-		uip_ipaddr(&GatewayIPAddress, DEVICE_GATEWAY[0],    DEVICE_GATEWAY[1],    DEVICE_GATEWAY[2],    DEVICE_GATEWAY[3]);
-		uip_sethostaddr(&IPAddress);
-		uip_setnetmask(&Netmask);
-		uip_setdraddr(&GatewayIPAddress);
-	}
-	else
-	{
-		#if defined(ENABLE_DHCP_CLIENT)
-		DHCPClientApp_Init();
-		#else
-		uip_ipaddr_t IPAddress, Netmask, GatewayIPAddress;
-		uip_ipaddr(&IPAddress,        DEVICE_IP_ADDRESS[0], DEVICE_IP_ADDRESS[1], DEVICE_IP_ADDRESS[2], DEVICE_IP_ADDRESS[3]);
-		uip_ipaddr(&Netmask,          DEVICE_NETMASK[0],    DEVICE_NETMASK[1],    DEVICE_NETMASK[2],    DEVICE_NETMASK[3]);
-		uip_ipaddr(&GatewayIPAddress, DEVICE_GATEWAY[0],    DEVICE_GATEWAY[1],    DEVICE_GATEWAY[2],    DEVICE_GATEWAY[3]);
-		uip_sethostaddr(&IPAddress);
-		uip_setnetmask(&Netmask);
-		uip_setdraddr(&GatewayIPAddress);
-		#endif
-	}
-
-	/* Virtual Webserver Ethernet Address Configuration */
-	uip_setethaddr(MACAddress);
-
-	/* HTTP Webserver Initialization */
-	HTTPServerApp_Init();
-
-	/* TELNET Server Initialization */
-	#if defined(ENABLE_TELNET_SERVER)
-	TELNETServerApp_Init();
-	#endif
-}
-
-/** uIP Management function. This function manages the uIP stack when called while an RNDIS device has been
- *  attached to the system.
- */
-void uIPManagement_ManageNetwork(void)
-{
-	if (((USB_CurrentMode == USB_MODE_Host)   && (USB_HostState   == HOST_STATE_Configured)) ||
-	    ((USB_CurrentMode == USB_MODE_Device) && (USB_DeviceState == DEVICE_STATE_Configured)))
-	{
-		uIPManagement_ProcessIncomingPacket();
-		uIPManagement_ManageConnections();
-	}
-}
-
-/** uIP TCP/IP network stack callback function for the processing of a given TCP connection. This routine dispatches
- *  to the appropriate TCP protocol application based on the connection's listen port number.
- */
-void uIPManagement_TCPCallback(void)
-{
-	/* Call the correct TCP application based on the port number the connection is listening on */
-	switch (uip_conn->lport)
-	{
-		case HTONS(HTTP_SERVER_PORT):
-			HTTPServerApp_Callback();
-			break;
-		#if defined(ENABLE_TELNET_SERVER)
-		case HTONS(TELNET_SERVER_PORT):
-			TELNETServerApp_Callback();
-			break;
-		#endif
-	}
-}
-
-/** uIP TCP/IP network stack callback function for the processing of a given UDP connection. This routine dispatches
- *  to the appropriate UDP protocol application based on the connection's listen port number.
- */
-void uIPManagement_UDPCallback(void)
-{
-	/* Call the correct UDP application based on the port number the connection is listening on */
-	switch (uip_udp_conn->lport)
-	{
-		#if defined(ENABLE_DHCP_CLIENT)
-		case HTONS(DHCP_CLIENT_PORT):
-			DHCPClientApp_Callback();
-			break;
-		#endif
-		#if defined(ENABLE_DHCP_SERVER)
-		case HTONS(DHCP_SERVER_PORT):
-			DHCPServerApp_Callback();
-			break;
-		#endif
-	}
-}
-
-/** Processes Incoming packets to the server from the connected RNDIS device, creating responses as needed. */
-static void uIPManagement_ProcessIncomingPacket(void)
-{
-	/* Determine which USB mode the system is currently initialized in */
-	if (USB_CurrentMode == USB_MODE_Device)
-	{
-		/* If no packet received, exit processing routine */
-		if (!(RNDIS_Device_IsPacketReceived(&Ethernet_RNDIS_Interface_Device)))
-		  return;
-
-		LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-		/* Read the Incoming packet straight into the UIP packet buffer */
-		RNDIS_Device_ReadPacket(&Ethernet_RNDIS_Interface_Device, uip_buf, &uip_len);
-	}
-	else
-	{
-		/* If no packet received, exit processing routine */
-		if (!(RNDIS_Host_IsPacketReceived(&Ethernet_RNDIS_Interface_Host)))
-		  return;
-
-		LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-		/* Read the Incoming packet straight into the UIP packet buffer */
-		RNDIS_Host_ReadPacket(&Ethernet_RNDIS_Interface_Host, uip_buf, &uip_len);
-	}
-
-	/* If the packet contains an Ethernet frame, process it */
-	if (uip_len > 0)
-	{
-		switch (((struct uip_eth_hdr*)uip_buf)->type)
-		{
-			case HTONS(UIP_ETHTYPE_IP):
-				/* Filter packet by MAC destination */
-				uip_arp_ipin();
-
-				/* Process Incoming packet */
-				uip_input();
-
-				/* If a response was generated, send it */
-				if (uip_len > 0)
-				{
-					/* Add destination MAC to outgoing packet */
-					uip_arp_out();
-
-					uip_split_output();
-				}
-
-				break;
-			case HTONS(UIP_ETHTYPE_ARP):
-				/* Process ARP packet */
-				uip_arp_arpin();
-
-				/* If a response was generated, send it */
-				if (uip_len > 0)
-				  uip_split_output();
-
-				break;
-		}
-	}
-
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Manages the currently open network connections, including TCP and (if enabled) UDP. */
-static void uIPManagement_ManageConnections(void)
-{
-	/* Poll TCP connections for more data to send back to the host */
-	for (uint8_t i = 0; i < UIP_CONNS; i++)
-	{
-		uip_poll_conn(&uip_conns[i]);
-
-		/* If a response was generated, send it */
-		if (uip_len > 0)
-		{
-			/* Add destination MAC to outgoing packet */
-			uip_arp_out();
-
-			/* Split and send the outgoing packet */
-			uip_split_output();
-		}
-	}
-
-	/* Manage open connections for timeouts */
-	if (timer_expired(&ConnectionTimer))
-	{
-		timer_reset(&ConnectionTimer);
-
-		LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-		for (uint8_t i = 0; i < UIP_CONNS; i++)
-		{
-			/* Run periodic connection management for each TCP connection */
-			uip_periodic(i);
-
-			/* If a response was generated, send it */
-			if (uip_len > 0)
-			{
-				/* Add destination MAC to outgoing packet */
-				uip_arp_out();
-
-				/* Split and send the outgoing packet */
-				uip_split_output();
-			}
-		}
-
-		#if defined(ENABLE_DHCP_CLIENT)
-		for (uint8_t i = 0; i < UIP_UDP_CONNS; i++)
-		{
-			/* Run periodic connection management for each UDP connection */
-			uip_udp_periodic(i);
-
-			/* If a response was generated, send it */
-			if (uip_len > 0)
-			{
-				/* Add destination MAC to outgoing packet */
-				uip_arp_out();
-
-				/* Split and send the outgoing packet */
-				uip_split_output();
-			}
-		}
-		#endif
-
-		LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	}
-
-	/* Manage ARP cache refreshing */
-	if (timer_expired(&ARPTimer))
-	{
-		timer_reset(&ARPTimer);
-		uip_arp_timer();
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uIPManagement.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uIPManagement.h
deleted file mode 100644
index 9a6fa17599..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uIPManagement.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for uIPManagement.c.
- */
-
-#ifndef _UIP_MANAGEMENT_H_
-#define _UIP_MANAGEMENT_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include <uip.h>
-		#include <uip_arp.h>
-		#include <uip-split.h>
-		#include <timer.h>
-
-		#include "Config/AppConfig.h"
-
-		#include "DHCPClientApp.h"
-		#include "DHCPServerApp.h"
-		#include "HTTPServerApp.h"
-		#include "TELNETServerApp.h"
-
-	/* External Variables: */
-		extern struct uip_eth_addr MACAddress;
-
-	/* Function Prototypes: */
-		void uIPManagement_Init(void);
-		void uIPManagement_ManageNetwork(void);
-		void uIPManagement_TCPCallback(void);
-		void uIPManagement_UDPCallback(void);
-
-		#if defined(INCLUDE_FROM_UIPMANAGEMENT_C)
-			static void uIPManagement_ProcessIncomingPacket(void);
-			static void uIPManagement_ManageConnections(void);
-		#endif
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/clock.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/clock.c
deleted file mode 100644
index e71f7209d2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/clock.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <stdint.h>
-#include <stdlib.h>
-#include <stdio.h>
-
-#include <LUFA/Common/Common.h>
-
-#include "clock.h"
-
-//Counted time
-volatile clock_time_t clock_datetime = 0;
-
-//Overflow interrupt
-ISR(TIMER1_COMPA_vect, ISR_BLOCK)
-{
-	clock_datetime += 1;
-}
-
-//Initialise the clock
-void clock_init()
-{
-	OCR1A  = (((F_CPU / 1024) / 100) - 1);
-	TCCR1B = ((1 << WGM12) | (1 << CS12) | (1 << CS10));
-	TIMSK1 = (1 << OCIE1A);
-}
-
-//Return time
-clock_time_t clock_time()
-{
-	clock_time_t time;
-
-	GlobalInterruptDisable();
-	time = clock_datetime;
-	GlobalInterruptEnable();
-
-	return time;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/clock.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/clock.h
deleted file mode 100644
index bbfa4ac0e3..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/clock.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __CLOCK_ARCH_H__
-#define __CLOCK_ARCH_H__
-
-#include <stdint.h>
-#include <util/atomic.h>
-
-typedef uint16_t clock_time_t;
-#define CLOCK_SECOND 100
-void clock_init(void);
-clock_time_t clock_time(void);
-
-#endif /* __CLOCK_ARCH_H__ */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/timer.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/timer.c
deleted file mode 100644
index eae06f43bd..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/timer.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/**
- * \addtogroup timer
- * @{
- */
-
-/**
- * \file
- * Timer library implementation.
- * \author
- * Adam Dunkels <adam@sics.se>
- */
-
-/*
- * Copyright (c) 2004, Swedish Institute of Computer Science.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Institute nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * This file is part of the uIP TCP/IP stack
- *
- * Author: Adam Dunkels <adam@sics.se>
- *
- * $Id: timer.c,v 1.2 2006/06/12 08:00:30 adam Exp $
- */
-
-#include "clock.h"
-#include "timer.h"
-
-/*---------------------------------------------------------------------------*/
-/**
- * Set a timer.
- *
- * This function is used to set a timer for a time sometime in the
- * future. The function timer_expired() will evaluate to true after
- * the timer has expired.
- *
- * \param t A pointer to the timer
- * \param interval The interval before the timer expires.
- *
- */
-void
-timer_set(struct timer *t, clock_time_t interval)
-{
-  t->interval = interval;
-  t->start = clock_time();
-}
-/*---------------------------------------------------------------------------*/
-/**
- * Reset the timer with the same interval.
- *
- * This function resets the timer with the same interval that was
- * given to the timer_set() function. The start point of the interval
- * is the exact time that the timer last expired. Therefore, this
- * function will cause the timer to be stable over time, unlike the
- * timer_restart() function.
- *
- * \param t A pointer to the timer.
- *
- * \sa timer_restart()
- */
-void
-timer_reset(struct timer *t)
-{
-  t->start += t->interval;
-}
-/*---------------------------------------------------------------------------*/
-/**
- * Restart the timer from the current point in time
- *
- * This function restarts a timer with the same interval that was
- * given to the timer_set() function. The timer will start at the
- * current time.
- *
- * \note A periodic timer will drift if this function is used to reset
- * it. For periodic timers, use the timer_reset() function instead.
- *
- * \param t A pointer to the timer.
- *
- * \sa timer_reset()
- */
-void
-timer_restart(struct timer *t)
-{
-  t->start = clock_time();
-}
-/*---------------------------------------------------------------------------*/
-/**
- * Check if a timer has expired.
- *
- * This function tests if a timer has expired and returns true or
- * false depending on its status.
- *
- * \param t A pointer to the timer
- *
- * \return Non-zero if the timer has expired, zero otherwise.
- *
- */
-int
-timer_expired(struct timer *t)
-{
-  return (clock_time_t)(clock_time() - t->start) >= (clock_time_t)t->interval;
-}
-/*---------------------------------------------------------------------------*/
-
-/** @} */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/timer.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/timer.h
deleted file mode 100644
index 04917e4c52..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/timer.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/**
- * \defgroup timer Timer library
- *
- * The timer library provides functions for setting, resetting and
- * restarting timers, and for checking if a timer has expired. An
- * application must "manually" check if its timers have expired; this
- * is not done automatically.
- *
- * A timer is declared as a \c struct \c timer and all access to the
- * timer is made by a pointer to the declared timer.
- *
- * \note The timer library uses the \ref clock "Clock library" to
- * measure time. Intervals should be specified in the format used by
- * the clock library.
- *
- * @{
- */
-
-
-/**
- * \file
- * Timer library header file.
- * \author
- * Adam Dunkels <adam@sics.se>
- */
-
-/*
- * Copyright (c) 2004, Swedish Institute of Computer Science.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Institute nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * This file is part of the uIP TCP/IP stack
- *
- * Author: Adam Dunkels <adam@sics.se>
- *
- * $Id: timer.h,v 1.3 2006/06/11 21:46:39 adam Exp $
- */
-#ifndef __TIMER_H__
-#define __TIMER_H__
-
-#include "clock.h"
-
-/**
- * A timer.
- *
- * This structure is used for declaring a timer. The timer must be set
- * with timer_set() before it can be used.
- *
- * \hideinitializer
- */
-struct timer {
-  clock_time_t start;
-  clock_time_t interval;
-};
-
-void timer_set(struct timer *t, clock_time_t interval);
-void timer_reset(struct timer *t);
-void timer_restart(struct timer *t);
-int timer_expired(struct timer *t);
-
-#endif /* __TIMER_H__ */
-
-/** @} */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip-split.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip-split.c
deleted file mode 100644
index 5222a05b63..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip-split.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Copyright (c) 2004, Swedish Institute of Computer Science.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Institute nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * This file is part of the Contiki operating system.
- *
- * Author: Adam Dunkels <adam@sics.se>
- *
- * $Id: uip-split.c,v 1.2 2008/10/14 13:39:12 julienabeille Exp $
- */
-
-#include "uip-split.h"
-
-
-#define BUF ((struct uip_tcpip_hdr *)&uip_buf[UIP_LLH_LEN])
-
-/*-----------------------------------------------------------------------------*/
-void
-uip_split_output(void)
-{
-#if UIP_TCP
-  u16_t tcplen, len1, len2;
-
-  /* We only try to split maximum sized TCP segments. */
-  if(BUF->proto == UIP_PROTO_TCP  && uip_len == UIP_BUFSIZE) {
-
-    tcplen = uip_len - UIP_TCPIP_HLEN - UIP_LLH_LEN;
-    /* Split the segment in two. If the original packet length was
-       odd, we make the second packet one byte larger. */
-    len1 = len2 = tcplen / 2;
-    if(len1 + len2 < tcplen) {
-      ++len2;
-    }
-
-    /* Create the first packet. This is done by altering the length
-       field of the IP header and updating the checksums. */
-    uip_len = len1 + UIP_TCPIP_HLEN + UIP_LLH_LEN;
-#if UIP_CONF_IPV6
-    /* For IPv6, the IP length field does not include the IPv6 IP header
-       length. */
-    BUF->len[0] = ((uip_len - UIP_IPH_LEN) >> 8);
-    BUF->len[1] = ((uip_len - UIP_IPH_LEN) & 0xff);
-#else /* UIP_CONF_IPV6 */
-    BUF->len[0] = (uip_len - UIP_LLH_LEN) >> 8;
-    BUF->len[1] = (uip_len - UIP_LLH_LEN) & 0xff;
-#endif /* UIP_CONF_IPV6 */
-
-    /* Recalculate the TCP checksum. */
-    BUF->tcpchksum = 0;
-    BUF->tcpchksum = ~(uip_tcpchksum());
-
-#if !UIP_CONF_IPV6
-    /* Recalculate the IP checksum. */
-    BUF->ipchksum = 0;
-    BUF->ipchksum = ~(uip_ipchksum());
-#endif /* UIP_CONF_IPV6 */
-
-    /* Transmit the first packet. */
-#if UIP_CONF_IPV6
-    tcpip_ipv6_output();
-#else
-	if (USB_CurrentMode == USB_MODE_Device)
-	  RNDIS_Device_SendPacket(&Ethernet_RNDIS_Interface_Device, uip_buf, uip_len);
-	else
-	  RNDIS_Host_SendPacket(&Ethernet_RNDIS_Interface_Host, uip_buf, uip_len);
-#endif /* UIP_CONF_IPV6 */
-
-    /* Now, create the second packet. To do this, it is not enough to
-       just alter the length field, but we must also update the TCP
-       sequence number and point the uip_appdata to a new place in
-       memory. This place is determined by the length of the first
-       packet (len1). */
-    uip_len = len2 + UIP_TCPIP_HLEN + UIP_LLH_LEN;
-#if UIP_CONF_IPV6
-    /* For IPv6, the IP length field does not include the IPv6 IP header
-       length. */
-    BUF->len[0] = ((uip_len - UIP_IPH_LEN) >> 8);
-    BUF->len[1] = ((uip_len - UIP_IPH_LEN) & 0xff);
-#else /* UIP_CONF_IPV6 */
-    BUF->len[0] = (uip_len  - UIP_LLH_LEN) >> 8;
-    BUF->len[1] = (uip_len - UIP_LLH_LEN) & 0xff;
-#endif /* UIP_CONF_IPV6 */
-
-    memcpy(uip_appdata, (u8_t *)uip_appdata + len1, len2);
-
-    uip_add32(BUF->seqno, len1);
-    BUF->seqno[0] = uip_acc32[0];
-    BUF->seqno[1] = uip_acc32[1];
-    BUF->seqno[2] = uip_acc32[2];
-    BUF->seqno[3] = uip_acc32[3];
-
-    /* Recalculate the TCP checksum. */
-    BUF->tcpchksum = 0;
-    BUF->tcpchksum = ~(uip_tcpchksum());
-
-#if !UIP_CONF_IPV6
-    /* Recalculate the IP checksum. */
-    BUF->ipchksum = 0;
-    BUF->ipchksum = ~(uip_ipchksum());
-#endif /* UIP_CONF_IPV6 */
-
-    /* Transmit the second packet. */
-#if UIP_CONF_IPV6
-    tcpip_ipv6_output();
-#else
-	if (USB_CurrentMode == USB_MODE_Device)
-	  RNDIS_Device_SendPacket(&Ethernet_RNDIS_Interface_Device, uip_buf, uip_len);
-	else
-	  RNDIS_Host_SendPacket(&Ethernet_RNDIS_Interface_Host, uip_buf, uip_len);
-#endif /* UIP_CONF_IPV6 */
-    return;
-  }
-#endif /* UIP_TCP */
-
-  /*    uip_fw_output();*/
-#if UIP_CONF_IPV6
-	tcpip_ipv6_output();
-#else
-	if (USB_CurrentMode == USB_MODE_Device)
-	  RNDIS_Device_SendPacket(&Ethernet_RNDIS_Interface_Device, uip_buf, uip_len);
-	else
-	  RNDIS_Host_SendPacket(&Ethernet_RNDIS_Interface_Host, uip_buf, uip_len);
-#endif /* UIP_CONF_IPV6 */
-}
-
-/*-----------------------------------------------------------------------------*/
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip-split.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip-split.h
deleted file mode 100644
index 0c768ce40a..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip-split.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright (c) 2004, Swedish Institute of Computer Science.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Institute nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * This file is part of the Contiki operating system.
- *
- * Author: Adam Dunkels <adam@sics.se>
- *
- * $Id: uip-split.h,v 1.1 2006/06/17 22:41:19 adamdunkels Exp $
- */
-/**
- * \addtogroup uip
- * @{
- */
-
-/**
- * \defgroup uipsplit uIP TCP throughput booster hack
- * @{
- *
- * The basic uIP TCP implementation only allows each TCP connection to
- * have a single TCP segment in flight at any given time. Because of
- * the delayed ACK algorithm employed by most TCP receivers, uIP's
- * limit on the amount of in-flight TCP segments seriously reduces the
- * maximum achievable throughput for sending data from uIP.
- *
- * The uip-split module is a hack which tries to remedy this
- * situation. By splitting maximum sized outgoing TCP segments into
- * two, the delayed ACK algorithm is not invoked at TCP
- * receivers. This improves the throughput when sending data from uIP
- * by orders of magnitude.
- *
- * The uip-split module uses the uip-fw module (uIP IP packet
- * forwarding) for sending packets. Therefore, the uip-fw module must
- * be set up with the appropriate network interfaces for this module
- * to work.
- */
-
-
-/**
- * \file
- * Module for splitting outbound TCP segments in two to avoid the
- * delayed ACK throughput degradation.
- * \author
- * Adam Dunkels <adam@sics.se>
- *
- */
-
-#ifndef __UIP_SPLIT_H__
-#define __UIP_SPLIT_H__
-
-#include <string.h>
-#include <uip.h>
-
-#include "../../USBHostMode.h"
-
-#include <LUFA/Drivers/USB/USB.h>
-
-/**
- * Handle outgoing packets.
- *
- * This function inspects an outgoing packet in the uip_buf buffer and
- * sends it out using the uip_fw_output() function. If the packet is a
- * full-sized TCP segment it will be split into two segments and
- * transmitted separately. This function should be called instead of
- * the actual device driver output function, or the uip_fw_output()
- * function.
- *
- * The headers of the outgoing packet is assumed to be in the uip_buf
- * buffer and the payload is assumed to be wherever uip_appdata
- * points. The length of the outgoing packet is assumed to be in the
- * uip_len variable.
- *
- */
-void uip_split_output(void);
-void uip_add32(u8_t *op32, u16_t op16);
-#endif /* __UIP_SPLIT_H__ */
-
-/** @} */
-/** @} */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip.c
deleted file mode 100644
index fead75775c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip.c
+++ /dev/null
@@ -1,1941 +0,0 @@
-#define DEBUG_PRINTF(...) /*printf(__VA_ARGS__)*/
-
-/**
- * \addtogroup uip
- * @{
- */
-
-/**
- * \file
- * The uIP TCP/IP stack code.
- * \author Adam Dunkels <adam@dunkels.com>
- */
-
-/*
- * Copyright (c) 2001-2003, Adam Dunkels.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * This file is part of the uIP TCP/IP stack.
- *
- * $Id: uip.c,v 1.15 2008/10/15 08:08:32 adamdunkels Exp $
- *
- */
-
-/*
- * uIP is a small implementation of the IP, UDP and TCP protocols (as
- * well as some basic ICMP stuff). The implementation couples the IP,
- * UDP, TCP and the application layers very tightly. To keep the size
- * of the compiled code down, this code frequently uses the goto
- * statement. While it would be possible to break the uip_process()
- * function into many smaller functions, this would increase the code
- * size because of the overhead of parameter passing and the fact that
- * the optimizer would not be as efficient.
- *
- * The principle is that we have a small buffer, called the uip_buf,
- * in which the device driver puts an incoming packet. The TCP/IP
- * stack parses the headers in the packet, and calls the
- * application. If the remote host has sent data to the application,
- * this data is present in the uip_buf and the application read the
- * data from there. It is up to the application to put this data into
- * a byte stream if needed. The application will not be fed with data
- * that is out of sequence.
- *
- * If the application whishes to send data to the peer, it should put
- * its data into the uip_buf. The uip_appdata pointer points to the
- * first available byte. The TCP/IP stack will calculate the
- * checksums, and fill in the necessary header fields and finally send
- * the packet back to the peer.
-*/
-
-#include "uip.h"
-#include "uipopt.h"
-#include "uip_arp.h"
-
-#if !UIP_CONF_IPV6 /* If UIP_CONF_IPV6 is defined, we compile the
-		      uip6.c file instead of this one. Therefore
-		      this #ifndef removes the entire compilation
-		      output of the uip.c file */
-
-
-#if UIP_CONF_IPV6
-#include "net/uip-neighbor.h"
-#endif /* UIP_CONF_IPV6 */
-
-#include <string.h>
-
-/*---------------------------------------------------------------------------*/
-/* Variable definitions. */
-
-
-/* The IP address of this host. If it is defined to be fixed (by
-   setting UIP_FIXEDADDR to 1 in uipopt.h), the address is set
-   here. Otherwise, the address */
-#if UIP_FIXEDADDR > 0
-const uip_ipaddr_t uip_hostaddr =
-  { UIP_IPADDR0, UIP_IPADDR1, UIP_IPADDR2, UIP_IPADDR3 };
-const uip_ipaddr_t uip_draddr =
-  { UIP_DRIPADDR0, UIP_DRIPADDR1, UIP_DRIPADDR2, UIP_DRIPADDR3 };
-const uip_ipaddr_t uip_netmask =
-  { UIP_NETMASK0, UIP_NETMASK1, UIP_NETMASK2, UIP_NETMASK3 };
-#else
-uip_ipaddr_t uip_hostaddr, uip_draddr, uip_netmask;
-#endif /* UIP_FIXEDADDR */
-
-const uip_ipaddr_t uip_broadcast_addr =
-#if UIP_CONF_IPV6
-  { { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-      0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff } };
-#else /* UIP_CONF_IPV6 */
-  { { 0xff, 0xff, 0xff, 0xff } };
-#endif /* UIP_CONF_IPV6 */
-const uip_ipaddr_t uip_all_zeroes_addr = { { 0x0, /* rest is 0 */ } };
-
-#if UIP_FIXEDETHADDR
-const struct uip_eth_addr uip_ethaddr = {{UIP_ETHADDR0,
-					  UIP_ETHADDR1,
-					  UIP_ETHADDR2,
-					  UIP_ETHADDR3,
-					  UIP_ETHADDR4,
-					  UIP_ETHADDR5}};
-#else
-struct uip_eth_addr uip_ethaddr = {{0,0,0,0,0,0}};
-#endif
-
-#ifndef UIP_CONF_EXTERNAL_BUFFER
-u8_t uip_buf[UIP_BUFSIZE + 2];   /* The packet buffer that contains
-				    incoming packets. */
-#endif /* UIP_CONF_EXTERNAL_BUFFER */
-
-void *uip_appdata;               /* The uip_appdata pointer points to
-				    application data. */
-void *uip_sappdata;              /* The uip_appdata pointer points to
-				    the application data which is to
-				    be sent. */
-#if UIP_URGDATA > 0
-void *uip_urgdata;               /* The uip_urgdata pointer points to
-   				    urgent data (out-of-band data), if
-   				    present. */
-u16_t uip_urglen, uip_surglen;
-#endif /* UIP_URGDATA > 0 */
-
-u16_t uip_len, uip_slen;
-                             /* The uip_len is either 8 or 16 bits,
-				depending on the maximum packet
-				size. */
-
-u8_t uip_flags;     /* The uip_flags variable is used for
-				communication between the TCP/IP stack
-				and the application program. */
-struct uip_conn *uip_conn;   /* uip_conn always points to the current
-				connection. */
-
-struct uip_conn uip_conns[UIP_CONNS];
-                             /* The uip_conns array holds all TCP
-				connections. */
-u16_t uip_listenports[UIP_LISTENPORTS];
-                             /* The uip_listenports list all currently
-				listening ports. */
-#if UIP_UDP
-struct uip_udp_conn *uip_udp_conn;
-struct uip_udp_conn uip_udp_conns[UIP_UDP_CONNS];
-#endif /* UIP_UDP */
-
-static u16_t ipid;           /* Ths ipid variable is an increasing
-				number that is used for the IP ID
-				field. */
-
-void uip_setipid(u16_t id) { ipid = id; }
-
-static u8_t iss[4];          /* The iss variable is used for the TCP
-				initial sequence number. */
-
-#if UIP_ACTIVE_OPEN
-static u16_t lastport;       /* Keeps track of the last port used for
-				a new connection. */
-#endif /* UIP_ACTIVE_OPEN */
-
-/* Temporary variables. */
-u8_t uip_acc32[4];
-static u8_t c, opt;
-static u16_t tmp16;
-
-/* Structures and definitions. */
-#define TCP_FIN 0x01
-#define TCP_SYN 0x02
-#define TCP_RST 0x04
-#define TCP_PSH 0x08
-#define TCP_ACK 0x10
-#define TCP_URG 0x20
-#define TCP_CTL 0x3f
-
-#define TCP_OPT_END     0   /* End of TCP options list */
-#define TCP_OPT_NOOP    1   /* "No-operation" TCP option */
-#define TCP_OPT_MSS     2   /* Maximum segment size TCP option */
-
-#define TCP_OPT_MSS_LEN 4   /* Length of TCP MSS option. */
-
-#define ICMP_ECHO_REPLY 0
-#define ICMP_ECHO       8
-
-#define ICMP_DEST_UNREACHABLE        3
-#define ICMP_PORT_UNREACHABLE        3
-
-#define ICMP6_ECHO_REPLY             129
-#define ICMP6_ECHO                   128
-#define ICMP6_NEIGHBOR_SOLICITATION  135
-#define ICMP6_NEIGHBOR_ADVERTISEMENT 136
-
-#define ICMP6_FLAG_S (1 << 6)
-
-#define ICMP6_OPTION_SOURCE_LINK_ADDRESS 1
-#define ICMP6_OPTION_TARGET_LINK_ADDRESS 2
-
-
-/* Macros. */
-#define BUF ((struct uip_tcpip_hdr *)&uip_buf[UIP_LLH_LEN])
-#define FBUF ((struct uip_tcpip_hdr *)&uip_reassbuf[0])
-#define ICMPBUF ((struct uip_icmpip_hdr *)&uip_buf[UIP_LLH_LEN])
-#define UDPBUF ((struct uip_udpip_hdr *)&uip_buf[UIP_LLH_LEN])
-
-
-#if UIP_STATISTICS == 1
-struct uip_stats uip_stat;
-#define UIP_STAT(s) s
-#else
-#define UIP_STAT(s)
-#endif /* UIP_STATISTICS == 1 */
-
-#if UIP_LOGGING == 1
-#include <stdio.h>
-void uip_log(char *msg);
-#define UIP_LOG(m) uip_log(m)
-#else
-#define UIP_LOG(m)
-#endif /* UIP_LOGGING == 1 */
-
-#if ! UIP_ARCH_ADD32
-void
-uip_add32(u8_t *op32, u16_t op16)
-{
-  uip_acc32[3] = op32[3] + (op16 & 0xff);
-  uip_acc32[2] = op32[2] + (op16 >> 8);
-  uip_acc32[1] = op32[1];
-  uip_acc32[0] = op32[0];
-
-  if(uip_acc32[2] < (op16 >> 8)) {
-    ++uip_acc32[1];
-    if(uip_acc32[1] == 0) {
-      ++uip_acc32[0];
-    }
-  }
-
-
-  if(uip_acc32[3] < (op16 & 0xff)) {
-    ++uip_acc32[2];
-    if(uip_acc32[2] == 0) {
-      ++uip_acc32[1];
-      if(uip_acc32[1] == 0) {
-	++uip_acc32[0];
-      }
-    }
-  }
-}
-
-#endif /* UIP_ARCH_ADD32 */
-
-#if ! UIP_ARCH_CHKSUM
-/*---------------------------------------------------------------------------*/
-static u16_t
-chksum(u16_t sum, const u8_t *data, u16_t len)
-{
-  u16_t t;
-  const u8_t *dataptr;
-  const u8_t *last_byte;
-
-  dataptr = data;
-  last_byte = data + len - 1;
-
-  while(dataptr < last_byte) {	/* At least two more bytes */
-    t = (dataptr[0] << 8) + dataptr[1];
-    sum += t;
-    if(sum < t) {
-      sum++;		/* carry */
-    }
-    dataptr += 2;
-  }
-
-  if(dataptr == last_byte) {
-    t = (dataptr[0] << 8) + 0;
-    sum += t;
-    if(sum < t) {
-      sum++;		/* carry */
-    }
-  }
-
-  /* Return sum in host byte order. */
-  return sum;
-}
-/*---------------------------------------------------------------------------*/
-u16_t
-uip_chksum(u16_t *data, u16_t len)
-{
-  return htons(chksum(0, (u8_t *)data, len));
-}
-/*---------------------------------------------------------------------------*/
-#ifndef UIP_ARCH_IPCHKSUM
-u16_t
-uip_ipchksum(void)
-{
-  u16_t sum;
-
-  sum = chksum(0, &uip_buf[UIP_LLH_LEN], UIP_IPH_LEN);
-  DEBUG_PRINTF("uip_ipchksum: sum 0x%04x\n", sum);
-  return (sum == 0) ? 0xffff : htons(sum);
-}
-#endif
-/*---------------------------------------------------------------------------*/
-static u16_t
-upper_layer_chksum(u8_t proto)
-{
-  u16_t upper_layer_len;
-  u16_t sum;
-
-#if UIP_CONF_IPV6
-  upper_layer_len = (((u16_t)(BUF->len[0]) << 8) + BUF->len[1]);
-#else /* UIP_CONF_IPV6 */
-  upper_layer_len = (((u16_t)(BUF->len[0]) << 8) + BUF->len[1]) - UIP_IPH_LEN;
-#endif /* UIP_CONF_IPV6 */
-
-  /* First sum pseudo-header. */
-
-  /* IP protocol and length fields. This addition cannot carry. */
-  sum = upper_layer_len + proto;
-  /* Sum IP source and destination addresses. */
-  sum = chksum(sum, (u8_t *)&BUF->srcipaddr, 2 * sizeof(uip_ipaddr_t));
-
-  /* Sum TCP header and data. */
-  sum = chksum(sum, &uip_buf[UIP_IPH_LEN + UIP_LLH_LEN],
-	       upper_layer_len);
-
-  return (sum == 0) ? 0xffff : htons(sum);
-}
-/*---------------------------------------------------------------------------*/
-#if UIP_CONF_IPV6
-u16_t
-uip_icmp6chksum(void)
-{
-  return upper_layer_chksum(UIP_PROTO_ICMP6);
-
-}
-#endif /* UIP_CONF_IPV6 */
-/*---------------------------------------------------------------------------*/
-u16_t
-uip_tcpchksum(void)
-{
-  return upper_layer_chksum(UIP_PROTO_TCP);
-}
-/*---------------------------------------------------------------------------*/
-#if UIP_UDP_CHECKSUMS
-u16_t
-uip_udpchksum(void)
-{
-  return upper_layer_chksum(UIP_PROTO_UDP);
-}
-#endif /* UIP_UDP_CHECKSUMS */
-#endif /* UIP_ARCH_CHKSUM */
-/*---------------------------------------------------------------------------*/
-void
-uip_init(void)
-{
-  for(c = 0; c < UIP_LISTENPORTS; ++c) {
-    uip_listenports[c] = 0;
-  }
-  for(c = 0; c < UIP_CONNS; ++c) {
-    uip_conns[c].tcpstateflags = UIP_CLOSED;
-  }
-#if UIP_ACTIVE_OPEN
-  lastport = 1024;
-#endif /* UIP_ACTIVE_OPEN */
-
-#if UIP_UDP
-  for(c = 0; c < UIP_UDP_CONNS; ++c) {
-    uip_udp_conns[c].lport = 0;
-  }
-#endif /* UIP_UDP */
-
-
-  /* IPv4 initialization. */
-#if UIP_FIXEDADDR == 0
-  /*  uip_hostaddr[0] = uip_hostaddr[1] = 0;*/
-#endif /* UIP_FIXEDADDR */
-
-}
-/*---------------------------------------------------------------------------*/
-#if UIP_ACTIVE_OPEN
-struct uip_conn *
-uip_connect(uip_ipaddr_t *ripaddr, u16_t rport)
-{
-  register struct uip_conn *conn, *cconn;
-
-  /* Find an unused local port. */
- again:
-  ++lastport;
-
-  if(lastport >= 32000) {
-    lastport = 4096;
-  }
-
-  /* Check if this port is already in use, and if so try to find
-     another one. */
-  for(c = 0; c < UIP_CONNS; ++c) {
-    conn = &uip_conns[c];
-    if(conn->tcpstateflags != UIP_CLOSED &&
-       conn->lport == htons(lastport)) {
-      goto again;
-    }
-  }
-
-  conn = 0;
-  for(c = 0; c < UIP_CONNS; ++c) {
-    cconn = &uip_conns[c];
-    if(cconn->tcpstateflags == UIP_CLOSED) {
-      conn = cconn;
-      break;
-    }
-    if(cconn->tcpstateflags == UIP_TIME_WAIT) {
-      if(conn == 0 ||
-	 cconn->timer > conn->timer) {
-	conn = cconn;
-      }
-    }
-  }
-
-  if(conn == 0) {
-    return 0;
-  }
-
-  conn->tcpstateflags = UIP_SYN_SENT;
-
-  conn->snd_nxt[0] = iss[0];
-  conn->snd_nxt[1] = iss[1];
-  conn->snd_nxt[2] = iss[2];
-  conn->snd_nxt[3] = iss[3];
-
-  conn->initialmss = conn->mss = UIP_TCP_MSS;
-
-  conn->len = 1;   /* TCP length of the SYN is one. */
-  conn->nrtx = 0;
-  conn->timer = 1; /* Send the SYN next time around. */
-  conn->rto = UIP_RTO;
-  conn->sa = 0;
-  conn->sv = 16;   /* Initial value of the RTT variance. */
-  conn->lport = htons(lastport);
-  conn->rport = rport;
-  uip_ipaddr_copy(&conn->ripaddr, ripaddr);
-
-  return conn;
-}
-#endif /* UIP_ACTIVE_OPEN */
-/*---------------------------------------------------------------------------*/
-#if UIP_UDP
-struct uip_udp_conn *
-uip_udp_new(const uip_ipaddr_t *ripaddr, u16_t rport)
-{
-  register struct uip_udp_conn *conn;
-
-  /* Find an unused local port. */
- again:
-  ++lastport;
-
-  if(lastport >= 32000) {
-    lastport = 4096;
-  }
-
-  for(c = 0; c < UIP_UDP_CONNS; ++c) {
-    if(uip_udp_conns[c].lport == htons(lastport)) {
-      goto again;
-    }
-  }
-
-
-  conn = 0;
-  for(c = 0; c < UIP_UDP_CONNS; ++c) {
-    if(uip_udp_conns[c].lport == 0) {
-      conn = &uip_udp_conns[c];
-      break;
-    }
-  }
-
-  if(conn == 0) {
-    return 0;
-  }
-
-  conn->lport = HTONS(lastport);
-  conn->rport = rport;
-  if(ripaddr == NULL) {
-    memset(&conn->ripaddr, 0, sizeof(uip_ipaddr_t));
-  } else {
-    uip_ipaddr_copy(&conn->ripaddr, ripaddr);
-  }
-  conn->ttl = UIP_TTL;
-
-  return conn;
-}
-#endif /* UIP_UDP */
-/*---------------------------------------------------------------------------*/
-void
-uip_unlisten(u16_t port)
-{
-  for(c = 0; c < UIP_LISTENPORTS; ++c) {
-    if(uip_listenports[c] == port) {
-      uip_listenports[c] = 0;
-      return;
-    }
-  }
-}
-/*---------------------------------------------------------------------------*/
-void
-uip_listen(u16_t port)
-{
-  for(c = 0; c < UIP_LISTENPORTS; ++c) {
-    if(uip_listenports[c] == 0) {
-      uip_listenports[c] = port;
-      return;
-    }
-  }
-}
-/*---------------------------------------------------------------------------*/
-/* XXX: IP fragment reassembly: not well-tested. */
-
-#if UIP_REASSEMBLY && !UIP_CONF_IPV6
-#define UIP_REASS_BUFSIZE (UIP_BUFSIZE - UIP_LLH_LEN)
-static u8_t uip_reassbuf[UIP_REASS_BUFSIZE];
-static u8_t uip_reassbitmap[UIP_REASS_BUFSIZE / (8 * 8)];
-static const u8_t bitmap_bits[8] = {0xff, 0x7f, 0x3f, 0x1f,
-				    0x0f, 0x07, 0x03, 0x01};
-static u16_t uip_reasslen;
-static u8_t uip_reassflags;
-#define UIP_REASS_FLAG_LASTFRAG 0x01
-static u8_t uip_reasstmr;
-
-#define IP_MF   0x20
-
-static u8_t
-uip_reass(void)
-{
-  u16_t offset, len;
-  u16_t i;
-
-  /* If ip_reasstmr is zero, no packet is present in the buffer, so we
-     write the IP header of the fragment into the reassembly
-     buffer. The timer is updated with the maximum age. */
-  if(uip_reasstmr == 0) {
-    memcpy(uip_reassbuf, &BUF->vhl, UIP_IPH_LEN);
-    uip_reasstmr = UIP_REASS_MAXAGE;
-    uip_reassflags = 0;
-    /* Clear the bitmap. */
-    memset(uip_reassbitmap, 0, sizeof(uip_reassbitmap));
-  }
-
-  /* Check if the incoming fragment matches the one currently present
-     in the reasembly buffer. If so, we proceed with copying the
-     fragment into the buffer. */
-  if(BUF->srcipaddr[0] == FBUF->srcipaddr[0] &&
-     BUF->srcipaddr[1] == FBUF->srcipaddr[1] &&
-     BUF->destipaddr[0] == FBUF->destipaddr[0] &&
-     BUF->destipaddr[1] == FBUF->destipaddr[1] &&
-     BUF->ipid[0] == FBUF->ipid[0] &&
-     BUF->ipid[1] == FBUF->ipid[1]) {
-
-    len = (BUF->len[0] << 8) + BUF->len[1] - (BUF->vhl & 0x0f) * 4;
-    offset = (((BUF->ipoffset[0] & 0x3f) << 8) + BUF->ipoffset[1]) * 8;
-
-    /* If the offset or the offset + fragment length overflows the
-       reassembly buffer, we discard the entire packet. */
-    if(offset > UIP_REASS_BUFSIZE ||
-       offset + len > UIP_REASS_BUFSIZE) {
-      uip_reasstmr = 0;
-      goto nullreturn;
-    }
-
-    /* Copy the fragment into the reassembly buffer, at the right
-       offset. */
-    memcpy(&uip_reassbuf[UIP_IPH_LEN + offset],
-	   (char *)BUF + (int)((BUF->vhl & 0x0f) * 4),
-	   len);
-
-    /* Update the bitmap. */
-    if(offset / (8 * 8) == (offset + len) / (8 * 8)) {
-      /* If the two endpoints are in the same byte, we only update
-	 that byte. */
-
-      uip_reassbitmap[offset / (8 * 8)] |=
-	     bitmap_bits[(offset / 8 ) & 7] &
-	     ~bitmap_bits[((offset + len) / 8 ) & 7];
-    } else {
-      /* If the two endpoints are in different bytes, we update the
-	 bytes in the endpoints and fill the stuff in-between with
-	 0xff. */
-      uip_reassbitmap[offset / (8 * 8)] |=
-	bitmap_bits[(offset / 8 ) & 7];
-      for(i = 1 + offset / (8 * 8); i < (offset + len) / (8 * 8); ++i) {
-	uip_reassbitmap[i] = 0xff;
-      }
-      uip_reassbitmap[(offset + len) / (8 * 8)] |=
-	~bitmap_bits[((offset + len) / 8 ) & 7];
-    }
-
-    /* If this fragment has the More Fragments flag set to zero, we
-       know that this is the last fragment, so we can calculate the
-       size of the entire packet. We also set the
-       IP_REASS_FLAG_LASTFRAG flag to indicate that we have received
-       the final fragment. */
-
-    if((BUF->ipoffset[0] & IP_MF) == 0) {
-      uip_reassflags |= UIP_REASS_FLAG_LASTFRAG;
-      uip_reasslen = offset + len;
-    }
-
-    /* Finally, we check if we have a full packet in the buffer. We do
-       this by checking if we have the last fragment and if all bits
-       in the bitmap are set. */
-    if(uip_reassflags & UIP_REASS_FLAG_LASTFRAG) {
-      /* Check all bytes up to and including all but the last byte in
-	 the bitmap. */
-      for(i = 0; i < uip_reasslen / (8 * 8) - 1; ++i) {
-	if(uip_reassbitmap[i] != 0xff) {
-	  goto nullreturn;
-	}
-      }
-      /* Check the last byte in the bitmap. It should contain just the
-	 right amount of bits. */
-      if(uip_reassbitmap[uip_reasslen / (8 * 8)] !=
-	 (u8_t)~bitmap_bits[uip_reasslen / 8 & 7]) {
-	goto nullreturn;
-      }
-
-      /* If we have come this far, we have a full packet in the
-	 buffer, so we allocate a pbuf and copy the packet into it. We
-	 also reset the timer. */
-      uip_reasstmr = 0;
-      memcpy(BUF, FBUF, uip_reasslen);
-
-      /* Pretend to be a "normal" (i.e., not fragmented) IP packet
-	 from now on. */
-      BUF->ipoffset[0] = BUF->ipoffset[1] = 0;
-      BUF->len[0] = uip_reasslen >> 8;
-      BUF->len[1] = uip_reasslen & 0xff;
-      BUF->ipchksum = 0;
-      BUF->ipchksum = ~(uip_ipchksum());
-
-      return uip_reasslen;
-    }
-  }
-
- nullreturn:
-  return 0;
-}
-#endif /* UIP_REASSEMBLY */
-/*---------------------------------------------------------------------------*/
-static void
-uip_add_rcv_nxt(u16_t n)
-{
-  uip_add32(uip_conn->rcv_nxt, n);
-  uip_conn->rcv_nxt[0] = uip_acc32[0];
-  uip_conn->rcv_nxt[1] = uip_acc32[1];
-  uip_conn->rcv_nxt[2] = uip_acc32[2];
-  uip_conn->rcv_nxt[3] = uip_acc32[3];
-}
-/*---------------------------------------------------------------------------*/
-void
-uip_process(u8_t flag)
-{
-  register struct uip_conn *uip_connr = uip_conn;
-
-#if UIP_UDP
-  if(flag == UIP_UDP_SEND_CONN) {
-    goto udp_send;
-  }
-#endif /* UIP_UDP */
-
-  uip_sappdata = uip_appdata = &uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN];
-
-  /* Check if we were invoked because of a poll request for a
-     particular connection. */
-  if(flag == UIP_POLL_REQUEST) {
-    if((uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_ESTABLISHED &&
-       !uip_outstanding(uip_connr)) {
-	uip_len = uip_slen = 0;
-	uip_flags = UIP_POLL;
-	UIP_APPCALL();
-	goto appsend;
-    }
-    goto drop;
-
-    /* Check if we were invoked because of the periodic timer firing. */
-  } else if(flag == UIP_TIMER) {
-#if UIP_REASSEMBLY
-    if(uip_reasstmr != 0) {
-      --uip_reasstmr;
-    }
-#endif /* UIP_REASSEMBLY */
-    /* Increase the initial sequence number. */
-    if(++iss[3] == 0) {
-      if(++iss[2] == 0) {
-	if(++iss[1] == 0) {
-	  ++iss[0];
-	}
-      }
-    }
-
-    /* Reset the length variables. */
-    uip_len = 0;
-    uip_slen = 0;
-
-    /* Check if the connection is in a state in which we simply wait
-       for the connection to time out. If so, we increase the
-       connection's timer and remove the connection if it times
-       out. */
-    if(uip_connr->tcpstateflags == UIP_TIME_WAIT ||
-       uip_connr->tcpstateflags == UIP_FIN_WAIT_2) {
-      ++(uip_connr->timer);
-      if(uip_connr->timer == UIP_TIME_WAIT_TIMEOUT) {
-	uip_connr->tcpstateflags = UIP_CLOSED;
-      }
-    } else if(uip_connr->tcpstateflags != UIP_CLOSED) {
-      /* If the connection has outstanding data, we increase the
-	 connection's timer and see if it has reached the RTO value
-	 in which case we retransmit. */
-      if(uip_outstanding(uip_connr)) {
-	if(uip_connr->timer-- == 0) {
-	  if(uip_connr->nrtx == UIP_MAXRTX ||
-	     ((uip_connr->tcpstateflags == UIP_SYN_SENT ||
-	       uip_connr->tcpstateflags == UIP_SYN_RCVD) &&
-	      uip_connr->nrtx == UIP_MAXSYNRTX)) {
-	    uip_connr->tcpstateflags = UIP_CLOSED;
-
-	    /* We call UIP_APPCALL() with uip_flags set to
-	       UIP_TIMEDOUT to inform the application that the
-	       connection has timed out. */
-	    uip_flags = UIP_TIMEDOUT;
-	    UIP_APPCALL();
-
-	    /* We also send a reset packet to the remote host. */
-	    BUF->flags = TCP_RST | TCP_ACK;
-	    goto tcp_send_nodata;
-	  }
-
-	  /* Exponential back-off. */
-	  uip_connr->timer = UIP_RTO << (uip_connr->nrtx > 4?
-					 4:
-					 uip_connr->nrtx);
-	  ++(uip_connr->nrtx);
-
-	  /* Ok, so we need to retransmit. We do this differently
-	     depending on which state we are in. In ESTABLISHED, we
-	     call upon the application so that it may prepare the
-	     data for the retransmit. In SYN_RCVD, we resend the
-	     SYNACK that we sent earlier and in LAST_ACK we have to
-	     retransmit our FINACK. */
-	  UIP_STAT(++uip_stat.tcp.rexmit);
-	  switch(uip_connr->tcpstateflags & UIP_TS_MASK) {
-	  case UIP_SYN_RCVD:
-	    /* In the SYN_RCVD state, we should retransmit our
-               SYNACK. */
-	    goto tcp_send_synack;
-
-#if UIP_ACTIVE_OPEN
-	  case UIP_SYN_SENT:
-	    /* In the SYN_SENT state, we retransmit out SYN. */
-	    BUF->flags = 0;
-	    goto tcp_send_syn;
-#endif /* UIP_ACTIVE_OPEN */
-
-	  case UIP_ESTABLISHED:
-	    /* In the ESTABLISHED state, we call upon the application
-               to do the actual retransmit after which we jump into
-               the code for sending out the packet (the apprexmit
-               label). */
-	    uip_flags = UIP_REXMIT;
-	    UIP_APPCALL();
-	    goto apprexmit;
-
-	  case UIP_FIN_WAIT_1:
-	  case UIP_CLOSING:
-	  case UIP_LAST_ACK:
-	    /* In all these states we should retransmit a FINACK. */
-	    goto tcp_send_finack;
-
-	  }
-	}
-      } else if((uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_ESTABLISHED) {
-	/* If there was no need for a retransmission, we poll the
-           application for new data. */
-	uip_len = uip_slen = 0;
-	uip_flags = UIP_POLL;
-	UIP_APPCALL();
-	goto appsend;
-      }
-    }
-    goto drop;
-  }
-#if UIP_UDP
-  if(flag == UIP_UDP_TIMER) {
-    if(uip_udp_conn->lport != 0) {
-      uip_conn = NULL;
-      uip_sappdata = uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN];
-      uip_len = uip_slen = 0;
-      uip_flags = UIP_POLL;
-      UIP_UDP_APPCALL();
-      goto udp_send;
-    } else {
-      goto drop;
-    }
-  }
-#endif
-
-  /* This is where the input processing starts. */
-  UIP_STAT(++uip_stat.ip.recv);
-
-  /* Start of IP input header processing code. */
-
-#if UIP_CONF_IPV6
-  /* Check validity of the IP header. */
-  if((BUF->vtc & 0xf0) != 0x60)  { /* IP version and header length. */
-    UIP_STAT(++uip_stat.ip.drop);
-    UIP_STAT(++uip_stat.ip.vhlerr);
-    UIP_LOG("ipv6: invalid version.");
-    goto drop;
-  }
-#else /* UIP_CONF_IPV6 */
-  /* Check validity of the IP header. */
-  if(BUF->vhl != 0x45)  { /* IP version and header length. */
-    UIP_STAT(++uip_stat.ip.drop);
-    UIP_STAT(++uip_stat.ip.vhlerr);
-    UIP_LOG("ip: invalid version or header length.");
-    goto drop;
-  }
-#endif /* UIP_CONF_IPV6 */
-
-  /* Check the size of the packet. If the size reported to us in
-     uip_len is smaller the size reported in the IP header, we assume
-     that the packet has been corrupted in transit. If the size of
-     uip_len is larger than the size reported in the IP packet header,
-     the packet has been padded and we set uip_len to the correct
-     value.. */
-
-  if((BUF->len[0] << 8) + BUF->len[1] <= uip_len) {
-    uip_len = (BUF->len[0] << 8) + BUF->len[1];
-#if UIP_CONF_IPV6
-    uip_len += 40; /* The length reported in the IPv6 header is the
-		      length of the payload that follows the
-		      header. However, uIP uses the uip_len variable
-		      for holding the size of the entire packet,
-		      including the IP header. For IPv4 this is not a
-		      problem as the length field in the IPv4 header
-		      contains the length of the entire packet. But
-		      for IPv6 we need to add the size of the IPv6
-		      header (40 bytes). */
-#endif /* UIP_CONF_IPV6 */
-  } else {
-    UIP_LOG("ip: packet shorter than reported in IP header.");
-    goto drop;
-  }
-
-#if !UIP_CONF_IPV6
-  /* Check the fragment flag. */
-  if((BUF->ipoffset[0] & 0x3f) != 0 ||
-     BUF->ipoffset[1] != 0) {
-#if UIP_REASSEMBLY
-    uip_len = uip_reass();
-    if(uip_len == 0) {
-      goto drop;
-    }
-#else /* UIP_REASSEMBLY */
-    UIP_STAT(++uip_stat.ip.drop);
-    UIP_STAT(++uip_stat.ip.fragerr);
-    UIP_LOG("ip: fragment dropped.");
-    goto drop;
-#endif /* UIP_REASSEMBLY */
-  }
-#endif /* UIP_CONF_IPV6 */
-
-  if(uip_ipaddr_cmp(&uip_hostaddr, &uip_all_zeroes_addr)) {
-    /* If we are configured to use ping IP address configuration and
-       hasn't been assigned an IP address yet, we accept all ICMP
-       packets. */
-#if UIP_PINGADDRCONF && !UIP_CONF_IPV6
-    if(BUF->proto == UIP_PROTO_ICMP) {
-      UIP_LOG("ip: possible ping config packet received.");
-      goto icmp_input;
-    } else {
-      UIP_LOG("ip: packet dropped since no address assigned.");
-      goto drop;
-    }
-#endif /* UIP_PINGADDRCONF */
-
-  } else {
-    /* If IP broadcast support is configured, we check for a broadcast
-       UDP packet, which may be destined to us. */
-#if UIP_BROADCAST
-    DEBUG_PRINTF("UDP IP checksum 0x%04x\n", uip_ipchksum());
-    if(BUF->proto == UIP_PROTO_UDP &&
-       uip_ipaddr_cmp(&BUF->destipaddr, &uip_broadcast_addr))
-	{
-		if (uip_ipaddr_cmp(&BUF->srcipaddr, &uip_all_zeroes_addr))
-		  uip_ipaddr_copy(&BUF->srcipaddr, &uip_broadcast_addr);
-
-		goto udp_input;
-    }
-#endif /* UIP_BROADCAST */
-
-    /* Check if the packet is destined for our IP address. */
-#if !UIP_CONF_IPV6
-    if(!uip_ipaddr_cmp(&BUF->destipaddr, &uip_hostaddr)) {
-      UIP_STAT(++uip_stat.ip.drop);
-      goto drop;
-    }
-#else /* UIP_CONF_IPV6 */
-    /* For IPv6, packet reception is a little trickier as we need to
-       make sure that we listen to certain multicast addresses (all
-       hosts multicast address, and the solicited-node multicast
-       address) as well. However, we will cheat here and accept all
-       multicast packets that are sent to the ff02::/16 addresses. */
-    if(!uip_ipaddr_cmp(&BUF->destipaddr, &uip_hostaddr) &&
-       BUF->destipaddr.u16[0] != HTONS(0xff02)) {
-      UIP_STAT(++uip_stat.ip.drop);
-      goto drop;
-    }
-#endif /* UIP_CONF_IPV6 */
-  }
-
-#if !UIP_CONF_IPV6
-  if(uip_ipchksum() != 0xffff) { /* Compute and check the IP header
-				    checksum. */
-    UIP_STAT(++uip_stat.ip.drop);
-    UIP_STAT(++uip_stat.ip.chkerr);
-    UIP_LOG("ip: bad checksum.");
-    goto drop;
-  }
-#endif /* UIP_CONF_IPV6 */
-
-  if(BUF->proto == UIP_PROTO_TCP) { /* Check for TCP packet. If so,
-				       proceed with TCP input
-				       processing. */
-    goto tcp_input;
-  }
-
-#if UIP_UDP
-  if(BUF->proto == UIP_PROTO_UDP) {
-    goto udp_input;
-  }
-#endif /* UIP_UDP */
-
-#if !UIP_CONF_IPV6
-  /* ICMPv4 processing code follows. */
-  if(BUF->proto != UIP_PROTO_ICMP) { /* We only allow ICMP packets from
-					here. */
-    UIP_STAT(++uip_stat.ip.drop);
-    UIP_STAT(++uip_stat.ip.protoerr);
-    UIP_LOG("ip: neither tcp nor icmp.");
-    goto drop;
-  }
-
-#if UIP_PINGADDRCONF
- icmp_input:
-#endif /* UIP_PINGADDRCONF */
-  UIP_STAT(++uip_stat.icmp.recv);
-
-  /* ICMP echo (i.e., ping) processing. This is simple, we only change
-     the ICMP type from ECHO to ECHO_REPLY and adjust the ICMP
-     checksum before we return the packet. */
-  if(ICMPBUF->type != ICMP_ECHO) {
-    UIP_STAT(++uip_stat.icmp.drop);
-    UIP_STAT(++uip_stat.icmp.typeerr);
-    UIP_LOG("icmp: not icmp echo.");
-    goto drop;
-  }
-
-  /* If we are configured to use ping IP address assignment, we use
-     the destination IP address of this ping packet and assign it to
-     yourself. */
-#if UIP_PINGADDRCONF
-  if(uip_ipaddr_cmp(&uip_hostaddr, &uip_all_zeroes_addr)) {
-    uip_hostaddr = BUF->destipaddr;
-  }
-#endif /* UIP_PINGADDRCONF */
-
-  ICMPBUF->type = ICMP_ECHO_REPLY;
-
-  if(ICMPBUF->icmpchksum >= HTONS(0xffff - (ICMP_ECHO << 8))) {
-    ICMPBUF->icmpchksum += HTONS(ICMP_ECHO << 8) + 1;
-  } else {
-    ICMPBUF->icmpchksum += HTONS(ICMP_ECHO << 8);
-  }
-
-  /* Swap IP addresses. */
-  uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr);
-  uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);
-
-  UIP_STAT(++uip_stat.icmp.sent);
-  BUF->ttl = UIP_TTL;
-  goto ip_send_nolen;
-
-  /* End of IPv4 input header processing code. */
-#else /* !UIP_CONF_IPV6 */
-
-  /* This is IPv6 ICMPv6 processing code. */
-  DEBUG_PRINTF("icmp6_input: length %d\n", uip_len);
-
-  if(BUF->proto != UIP_PROTO_ICMP6) { /* We only allow ICMPv6 packets from
-					 here. */
-    UIP_STAT(++uip_stat.ip.drop);
-    UIP_STAT(++uip_stat.ip.protoerr);
-    UIP_LOG("ip: neither tcp nor icmp6.");
-    goto drop;
-  }
-
-  UIP_STAT(++uip_stat.icmp.recv);
-
-  /* If we get a neighbor solicitation for our address we should send
-     a neighbor advertisement message back. */
-  if(ICMPBUF->type == ICMP6_NEIGHBOR_SOLICITATION) {
-    if(uip_ipaddr_cmp(&ICMPBUF->icmp6data, &uip_hostaddr)) {
-
-      if(ICMPBUF->options[0] == ICMP6_OPTION_SOURCE_LINK_ADDRESS) {
-	/* Save the sender's address in our neighbor list. */
-	uip_neighbor_add(&ICMPBUF->srcipaddr, &(ICMPBUF->options[2]));
-      }
-
-      /* We should now send a neighbor advertisement back to where the
-	 neighbor solicitation came from. */
-      ICMPBUF->type = ICMP6_NEIGHBOR_ADVERTISEMENT;
-      ICMPBUF->flags = ICMP6_FLAG_S; /* Solicited flag. */
-
-      ICMPBUF->reserved1 = ICMPBUF->reserved2 = ICMPBUF->reserved3 = 0;
-
-      uip_ipaddr_copy(&ICMPBUF->destipaddr, &ICMPBUF->srcipaddr);
-      uip_ipaddr_copy(&ICMPBUF->srcipaddr, &uip_hostaddr);
-      ICMPBUF->options[0] = ICMP6_OPTION_TARGET_LINK_ADDRESS;
-      ICMPBUF->options[1] = 1;  /* Options length, 1 = 8 bytes. */
-      memcpy(&(ICMPBUF->options[2]), &uip_ethaddr, sizeof(uip_ethaddr));
-      ICMPBUF->icmpchksum = 0;
-      ICMPBUF->icmpchksum = ~uip_icmp6chksum();
-
-      goto send;
-
-    }
-    goto drop;
-  } else if(ICMPBUF->type == ICMP6_ECHO) {
-    /* ICMP echo (i.e., ping) processing. This is simple, we only
-       change the ICMP type from ECHO to ECHO_REPLY and update the
-       ICMP checksum before we return the packet. */
-
-    ICMPBUF->type = ICMP6_ECHO_REPLY;
-
-    uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr);
-    uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);
-    ICMPBUF->icmpchksum = 0;
-    ICMPBUF->icmpchksum = ~uip_icmp6chksum();
-
-    UIP_STAT(++uip_stat.icmp.sent);
-    goto send;
-  } else {
-    DEBUG_PRINTF("Unknown icmp6 message type %d\n", ICMPBUF->type);
-    UIP_STAT(++uip_stat.icmp.drop);
-    UIP_STAT(++uip_stat.icmp.typeerr);
-    UIP_LOG("icmp: unknown ICMP message.");
-    goto drop;
-  }
-
-  /* End of IPv6 ICMP processing. */
-
-#endif /* !UIP_CONF_IPV6 */
-
-#if UIP_UDP
-  /* UDP input processing. */
- udp_input:
-  /* UDP processing is really just a hack. We don't do anything to the
-     UDP/IP headers, but let the UDP application do all the hard
-     work. If the application sets uip_slen, it has a packet to
-     send. */
-#if UIP_UDP_CHECKSUMS
-  uip_len = uip_len - UIP_IPUDPH_LEN;
-  uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN];
-  if(UDPBUF->udpchksum != 0 && uip_udpchksum() != 0xffff) {
-    UIP_STAT(++uip_stat.udp.drop);
-    UIP_STAT(++uip_stat.udp.chkerr);
-    UIP_LOG("udp: bad checksum.");
-    goto drop;
-  }
-#else /* UIP_UDP_CHECKSUMS */
-  uip_len = uip_len - UIP_IPUDPH_LEN;
-#endif /* UIP_UDP_CHECKSUMS */
-
-  /* Demultiplex this UDP packet between the UDP "connections". */
-  for(uip_udp_conn = &uip_udp_conns[0];
-      uip_udp_conn < &uip_udp_conns[UIP_UDP_CONNS];
-      ++uip_udp_conn) {
-    /* If the local UDP port is non-zero, the connection is considered
-       to be used. If so, the local port number is checked against the
-       destination port number in the received packet. If the two port
-       numbers match, the remote port number is checked if the
-       connection is bound to a remote port. Finally, if the
-       connection is bound to a remote IP address, the source IP
-       address of the packet is checked. */
-    if(uip_udp_conn->lport != 0 &&
-       UDPBUF->destport == uip_udp_conn->lport &&
-       (uip_udp_conn->rport == 0 ||
-        UDPBUF->srcport == uip_udp_conn->rport) &&
-       (uip_ipaddr_cmp(&uip_udp_conn->ripaddr, &uip_all_zeroes_addr) ||
-	uip_ipaddr_cmp(&uip_udp_conn->ripaddr, &uip_broadcast_addr) ||
-	uip_ipaddr_cmp(&BUF->srcipaddr, &uip_udp_conn->ripaddr))) {
-      goto udp_found;
-    }
-  }
-  UIP_LOG("udp: no matching connection found");
-#if UIP_CONF_ICMP_DEST_UNREACH && !UIP_CONF_IPV6
-  /* Copy fields from packet header into payload of this ICMP packet. */
-  memcpy(&(ICMPBUF->payload[0]), ICMPBUF, UIP_IPH_LEN + 8);
-
-  /* Set the ICMP type and code. */
-  ICMPBUF->type = ICMP_DEST_UNREACHABLE;
-  ICMPBUF->icode = ICMP_PORT_UNREACHABLE;
-
-  /* Calculate the ICMP checksum. */
-  ICMPBUF->icmpchksum = 0;
-  ICMPBUF->icmpchksum = ~uip_chksum((u16_t *)&(ICMPBUF->type), 36);
-
-  /* Set the IP destination address to be the source address of the
-     original packet. */
-  uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr);
-
-  /* Set our IP address as the source address. */
-  uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);
-
-  /* The size of the ICMP destination unreachable packet is 36 + the
-     size of the IP header (20) = 56. */
-  uip_len = 36 + UIP_IPH_LEN;
-  ICMPBUF->len[0] = 0;
-  ICMPBUF->len[1] = (u8_t)uip_len;
-  ICMPBUF->ttl = UIP_TTL;
-  ICMPBUF->proto = UIP_PROTO_ICMP;
-
-  goto ip_send_nolen;
-#else /* UIP_CONF_ICMP_DEST_UNREACH */
-  goto drop;
-#endif /* UIP_CONF_ICMP_DEST_UNREACH */
-
- udp_found:
-  uip_conn = NULL;
-  uip_flags = UIP_NEWDATA;
-  uip_sappdata = uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPUDPH_LEN];
-  uip_slen = 0;
-  UIP_UDP_APPCALL();
-
- udp_send:
-  if(uip_slen == 0) {
-    goto drop;
-  }
-  uip_len = uip_slen + UIP_IPUDPH_LEN;
-
-#if UIP_CONF_IPV6
-  /* For IPv6, the IP length field does not include the IPv6 IP header
-     length. */
-  BUF->len[0] = ((uip_len - UIP_IPH_LEN) >> 8);
-  BUF->len[1] = ((uip_len - UIP_IPH_LEN) & 0xff);
-#else /* UIP_CONF_IPV6 */
-  BUF->len[0] = (uip_len >> 8);
-  BUF->len[1] = (uip_len & 0xff);
-#endif /* UIP_CONF_IPV6 */
-
-  BUF->ttl = uip_udp_conn->ttl;
-  BUF->proto = UIP_PROTO_UDP;
-
-  UDPBUF->udplen = HTONS(uip_slen + UIP_UDPH_LEN);
-  UDPBUF->udpchksum = 0;
-
-  BUF->srcport  = uip_udp_conn->lport;
-  BUF->destport = uip_udp_conn->rport;
-
-  uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);
-  uip_ipaddr_copy(&BUF->destipaddr, &uip_udp_conn->ripaddr);
-
-  uip_appdata = &uip_buf[UIP_LLH_LEN + UIP_IPTCPH_LEN];
-
-#if UIP_UDP_CHECKSUMS
-  /* Calculate UDP checksum. */
-  UDPBUF->udpchksum = ~(uip_udpchksum());
-  if(UDPBUF->udpchksum == 0) {
-    UDPBUF->udpchksum = 0xffff;
-  }
-#endif /* UIP_UDP_CHECKSUMS */
-
-  goto ip_send_nolen;
-#endif /* UIP_UDP */
-
-  /* TCP input processing. */
- tcp_input:
-  UIP_STAT(++uip_stat.tcp.recv);
-
-  /* Start of TCP input header processing code. */
-
-  if(uip_tcpchksum() != 0xffff) {   /* Compute and check the TCP
-				       checksum. */
-    UIP_STAT(++uip_stat.tcp.drop);
-    UIP_STAT(++uip_stat.tcp.chkerr);
-    UIP_LOG("tcp: bad checksum.");
-    goto drop;
-  }
-
-  /* Demultiplex this segment. */
-  /* First check any active connections. */
-  for(uip_connr = &uip_conns[0]; uip_connr <= &uip_conns[UIP_CONNS - 1];
-      ++uip_connr) {
-    if(uip_connr->tcpstateflags != UIP_CLOSED &&
-       BUF->destport == uip_connr->lport &&
-       BUF->srcport == uip_connr->rport &&
-       uip_ipaddr_cmp(&BUF->srcipaddr, &uip_connr->ripaddr)) {
-      goto found;
-    }
-  }
-
-  /* If we didn't find and active connection that expected the packet,
-     either this packet is an old duplicate, or this is a SYN packet
-     destined for a connection in LISTEN. If the SYN flag isn't set,
-     it is an old packet and we send a RST. */
-  if((BUF->flags & TCP_CTL) != TCP_SYN) {
-    goto reset;
-  }
-
-  tmp16 = BUF->destport;
-  /* Next, check listening connections. */
-  for(c = 0; c < UIP_LISTENPORTS; ++c) {
-    if(tmp16 == uip_listenports[c]) {
-      goto found_listen;
-    }
-  }
-
-  /* No matching connection found, so we send a RST packet. */
-  UIP_STAT(++uip_stat.tcp.synrst);
-
- reset:
-  /* We do not send resets in response to resets. */
-  if(BUF->flags & TCP_RST) {
-    goto drop;
-  }
-
-  UIP_STAT(++uip_stat.tcp.rst);
-
-  BUF->flags = TCP_RST | TCP_ACK;
-  uip_len = UIP_IPTCPH_LEN;
-  BUF->tcpoffset = 5 << 4;
-
-  /* Flip the seqno and ackno fields in the TCP header. */
-  c = BUF->seqno[3];
-  BUF->seqno[3] = BUF->ackno[3];
-  BUF->ackno[3] = c;
-
-  c = BUF->seqno[2];
-  BUF->seqno[2] = BUF->ackno[2];
-  BUF->ackno[2] = c;
-
-  c = BUF->seqno[1];
-  BUF->seqno[1] = BUF->ackno[1];
-  BUF->ackno[1] = c;
-
-  c = BUF->seqno[0];
-  BUF->seqno[0] = BUF->ackno[0];
-  BUF->ackno[0] = c;
-
-  /* We also have to increase the sequence number we are
-     acknowledging. If the least significant byte overflowed, we need
-     to propagate the carry to the other bytes as well. */
-  if(++BUF->ackno[3] == 0) {
-    if(++BUF->ackno[2] == 0) {
-      if(++BUF->ackno[1] == 0) {
-	++BUF->ackno[0];
-      }
-    }
-  }
-
-  /* Swap port numbers. */
-  tmp16 = BUF->srcport;
-  BUF->srcport = BUF->destport;
-  BUF->destport = tmp16;
-
-  /* Swap IP addresses. */
-  uip_ipaddr_copy(&BUF->destipaddr, &BUF->srcipaddr);
-  uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);
-
-  /* And send out the RST packet! */
-  goto tcp_send_noconn;
-
-  /* This label will be jumped to if we matched the incoming packet
-     with a connection in LISTEN. In that case, we should create a new
-     connection and send a SYNACK in return. */
- found_listen:
-  /* First we check if there are any connections available. Unused
-     connections are kept in the same table as used connections, but
-     unused ones have the tcpstate set to CLOSED. Also, connections in
-     TIME_WAIT are kept track of and we'll use the oldest one if no
-     CLOSED connections are found. Thanks to Eddie C. Dost for a very
-     nice algorithm for the TIME_WAIT search. */
-  uip_connr = 0;
-  for(c = 0; c < UIP_CONNS; ++c) {
-    if(uip_conns[c].tcpstateflags == UIP_CLOSED) {
-      uip_connr = &uip_conns[c];
-      break;
-    }
-    if(uip_conns[c].tcpstateflags == UIP_TIME_WAIT) {
-      if(uip_connr == 0 ||
-	 uip_conns[c].timer > uip_connr->timer) {
-	uip_connr = &uip_conns[c];
-      }
-    }
-  }
-
-  if(uip_connr == 0) {
-    /* All connections are used already, we drop packet and hope that
-       the remote end will retransmit the packet at a time when we
-       have more spare connections. */
-    UIP_STAT(++uip_stat.tcp.syndrop);
-    UIP_LOG("tcp: found no unused connections.");
-    goto drop;
-  }
-  uip_conn = uip_connr;
-
-  /* Fill in the necessary fields for the new connection. */
-  uip_connr->rto = uip_connr->timer = UIP_RTO;
-  uip_connr->sa = 0;
-  uip_connr->sv = 4;
-  uip_connr->nrtx = 0;
-  uip_connr->lport = BUF->destport;
-  uip_connr->rport = BUF->srcport;
-  uip_ipaddr_copy(&uip_connr->ripaddr, &BUF->srcipaddr);
-  uip_connr->tcpstateflags = UIP_SYN_RCVD;
-
-  uip_connr->snd_nxt[0] = iss[0];
-  uip_connr->snd_nxt[1] = iss[1];
-  uip_connr->snd_nxt[2] = iss[2];
-  uip_connr->snd_nxt[3] = iss[3];
-  uip_connr->len = 1;
-
-  /* rcv_nxt should be the seqno from the incoming packet + 1. */
-  uip_connr->rcv_nxt[3] = BUF->seqno[3];
-  uip_connr->rcv_nxt[2] = BUF->seqno[2];
-  uip_connr->rcv_nxt[1] = BUF->seqno[1];
-  uip_connr->rcv_nxt[0] = BUF->seqno[0];
-  uip_add_rcv_nxt(1);
-
-  /* Parse the TCP MSS option, if present. */
-  if((BUF->tcpoffset & 0xf0) > 0x50) {
-    for(c = 0; c < ((BUF->tcpoffset >> 4) - 5) << 2 ;) {
-      opt = uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + c];
-      if(opt == TCP_OPT_END) {
-	/* End of options. */
-	break;
-      } else if(opt == TCP_OPT_NOOP) {
-	++c;
-	/* NOP option. */
-      } else if(opt == TCP_OPT_MSS &&
-		uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == TCP_OPT_MSS_LEN) {
-	/* An MSS option with the right option length. */
-	tmp16 = ((u16_t)uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 2 + c] << 8) |
-	  (u16_t)uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN + 3 + c];
-	uip_connr->initialmss = uip_connr->mss =
-	  tmp16 > UIP_TCP_MSS? UIP_TCP_MSS: tmp16;
-
-	/* And we are done processing options. */
-	break;
-      } else {
-	/* All other options have a length field, so that we easily
-	   can skip past them. */
-	if(uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == 0) {
-	  /* If the length field is zero, the options are malformed
-	     and we don't process them further. */
-	  break;
-	}
-	c += uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c];
-      }
-    }
-  }
-
-  /* Our response will be a SYNACK. */
-#if UIP_ACTIVE_OPEN
- tcp_send_synack:
-  BUF->flags = TCP_ACK;
-
- tcp_send_syn:
-  BUF->flags |= TCP_SYN;
-#else /* UIP_ACTIVE_OPEN */
- tcp_send_synack:
-  BUF->flags = TCP_SYN | TCP_ACK;
-#endif /* UIP_ACTIVE_OPEN */
-
-  /* We send out the TCP Maximum Segment Size option with our
-     SYNACK. */
-  BUF->optdata[0] = TCP_OPT_MSS;
-  BUF->optdata[1] = TCP_OPT_MSS_LEN;
-  BUF->optdata[2] = (UIP_TCP_MSS) / 256;
-  BUF->optdata[3] = (UIP_TCP_MSS) & 255;
-  uip_len = UIP_IPTCPH_LEN + TCP_OPT_MSS_LEN;
-  BUF->tcpoffset = ((UIP_TCPH_LEN + TCP_OPT_MSS_LEN) / 4) << 4;
-  goto tcp_send;
-
-  /* This label will be jumped to if we found an active connection. */
- found:
-  uip_conn = uip_connr;
-  uip_flags = 0;
-  /* We do a very naive form of TCP reset processing; we just accept
-     any RST and kill our connection. We should in fact check if the
-     sequence number of this reset is within our advertised window
-     before we accept the reset. */
-  if(BUF->flags & TCP_RST) {
-    uip_connr->tcpstateflags = UIP_CLOSED;
-    UIP_LOG("tcp: got reset, aborting connection.");
-    uip_flags = UIP_ABORT;
-    UIP_APPCALL();
-    goto drop;
-  }
-  /* Calculate the length of the data, if the application has sent
-     any data to us. */
-  c = (BUF->tcpoffset >> 4) << 2;
-  /* uip_len will contain the length of the actual TCP data. This is
-     calculated by subtracing the length of the TCP header (in
-     c) and the length of the IP header (20 bytes). */
-  uip_len = uip_len - c - UIP_IPH_LEN;
-
-  /* First, check if the sequence number of the incoming packet is
-     what we're expecting next. If not, we send out an ACK with the
-     correct numbers in. */
-  if(!(((uip_connr->tcpstateflags & UIP_TS_MASK) == UIP_SYN_SENT) &&
-       ((BUF->flags & TCP_CTL) == (TCP_SYN | TCP_ACK)))) {
-    if((uip_len > 0 || ((BUF->flags & (TCP_SYN | TCP_FIN)) != 0)) &&
-       (BUF->seqno[0] != uip_connr->rcv_nxt[0] ||
-	BUF->seqno[1] != uip_connr->rcv_nxt[1] ||
-	BUF->seqno[2] != uip_connr->rcv_nxt[2] ||
-	BUF->seqno[3] != uip_connr->rcv_nxt[3])) {
-      goto tcp_send_ack;
-    }
-  }
-
-  /* Next, check if the incoming segment acknowledges any outstanding
-     data. If so, we update the sequence number, reset the length of
-     the outstanding data, calculate RTT estimations, and reset the
-     retransmission timer. */
-  if((BUF->flags & TCP_ACK) && uip_outstanding(uip_connr)) {
-    uip_add32(uip_connr->snd_nxt, uip_connr->len);
-
-    if(BUF->ackno[0] == uip_acc32[0] &&
-       BUF->ackno[1] == uip_acc32[1] &&
-       BUF->ackno[2] == uip_acc32[2] &&
-       BUF->ackno[3] == uip_acc32[3]) {
-      /* Update sequence number. */
-      uip_connr->snd_nxt[0] = uip_acc32[0];
-      uip_connr->snd_nxt[1] = uip_acc32[1];
-      uip_connr->snd_nxt[2] = uip_acc32[2];
-      uip_connr->snd_nxt[3] = uip_acc32[3];
-
-      /* Do RTT estimation, unless we have done retransmissions. */
-      if(uip_connr->nrtx == 0) {
-	signed char m;
-	m = uip_connr->rto - uip_connr->timer;
-	/* This is taken directly from VJs original code in his paper */
-	m = m - (uip_connr->sa >> 3);
-	uip_connr->sa += m;
-	if(m < 0) {
-	  m = -m;
-	}
-	m = m - (uip_connr->sv >> 2);
-	uip_connr->sv += m;
-	uip_connr->rto = (uip_connr->sa >> 3) + uip_connr->sv;
-
-      }
-      /* Set the acknowledged flag. */
-      uip_flags = UIP_ACKDATA;
-      /* Reset the retransmission timer. */
-      uip_connr->timer = uip_connr->rto;
-
-      /* Reset length of outstanding data. */
-      uip_connr->len = 0;
-    }
-
-  }
-
-  /* Do different things depending on in what state the connection is. */
-  switch(uip_connr->tcpstateflags & UIP_TS_MASK) {
-    /* CLOSED and LISTEN are not handled here. CLOSE_WAIT is not
-	implemented, since we force the application to close when the
-	peer sends a FIN (hence the application goes directly from
-	ESTABLISHED to LAST_ACK). */
-  case UIP_SYN_RCVD:
-    /* In SYN_RCVD we have sent out a SYNACK in response to a SYN, and
-       we are waiting for an ACK that acknowledges the data we sent
-       out the last time. Therefore, we want to have the UIP_ACKDATA
-       flag set. If so, we enter the ESTABLISHED state. */
-    if(uip_flags & UIP_ACKDATA) {
-      uip_connr->tcpstateflags = UIP_ESTABLISHED;
-      uip_flags = UIP_CONNECTED;
-      uip_connr->len = 0;
-      if(uip_len > 0) {
-        uip_flags |= UIP_NEWDATA;
-        uip_add_rcv_nxt(uip_len);
-      }
-      uip_slen = 0;
-      UIP_APPCALL();
-      goto appsend;
-    }
-    goto drop;
-#if UIP_ACTIVE_OPEN
-  case UIP_SYN_SENT:
-    /* In SYN_SENT, we wait for a SYNACK that is sent in response to
-       our SYN. The rcv_nxt is set to sequence number in the SYNACK
-       plus one, and we send an ACK. We move into the ESTABLISHED
-       state. */
-    if((uip_flags & UIP_ACKDATA) &&
-       (BUF->flags & TCP_CTL) == (TCP_SYN | TCP_ACK)) {
-
-      /* Parse the TCP MSS option, if present. */
-      if((BUF->tcpoffset & 0xf0) > 0x50) {
-	for(c = 0; c < ((BUF->tcpoffset >> 4) - 5) << 2 ;) {
-	  opt = uip_buf[UIP_IPTCPH_LEN + UIP_LLH_LEN + c];
-	  if(opt == TCP_OPT_END) {
-	    /* End of options. */
-	    break;
-	  } else if(opt == TCP_OPT_NOOP) {
-	    ++c;
-	    /* NOP option. */
-	  } else if(opt == TCP_OPT_MSS &&
-		    uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == TCP_OPT_MSS_LEN) {
-	    /* An MSS option with the right option length. */
-	    tmp16 = (uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 2 + c] << 8) |
-	      uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 3 + c];
-	    uip_connr->initialmss =
-	      uip_connr->mss = tmp16 > UIP_TCP_MSS? UIP_TCP_MSS: tmp16;
-
-	    /* And we are done processing options. */
-	    break;
-	  } else {
-	    /* All other options have a length field, so that we easily
-	       can skip past them. */
-	    if(uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c] == 0) {
-	      /* If the length field is zero, the options are malformed
-		 and we don't process them further. */
-	      break;
-	    }
-	    c += uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN + 1 + c];
-	  }
-	}
-      }
-      uip_connr->tcpstateflags = UIP_ESTABLISHED;
-      uip_connr->rcv_nxt[0] = BUF->seqno[0];
-      uip_connr->rcv_nxt[1] = BUF->seqno[1];
-      uip_connr->rcv_nxt[2] = BUF->seqno[2];
-      uip_connr->rcv_nxt[3] = BUF->seqno[3];
-      uip_add_rcv_nxt(1);
-      uip_flags = UIP_CONNECTED | UIP_NEWDATA;
-      uip_connr->len = 0;
-      uip_len = 0;
-      uip_slen = 0;
-      UIP_APPCALL();
-      goto appsend;
-    }
-    /* Inform the application that the connection failed */
-    uip_flags = UIP_ABORT;
-    UIP_APPCALL();
-    /* The connection is closed after we send the RST */
-    uip_conn->tcpstateflags = UIP_CLOSED;
-    goto reset;
-#endif /* UIP_ACTIVE_OPEN */
-
-  case UIP_ESTABLISHED:
-    /* In the ESTABLISHED state, we call upon the application to feed
-    data into the uip_buf. If the UIP_ACKDATA flag is set, the
-    application should put new data into the buffer, otherwise we are
-    retransmitting an old segment, and the application should put that
-    data into the buffer.
-
-    If the incoming packet is a FIN, we should close the connection on
-    this side as well, and we send out a FIN and enter the LAST_ACK
-    state. We require that there is no outstanding data; otherwise the
-    sequence numbers will be screwed up. */
-
-    if(BUF->flags & TCP_FIN && !(uip_connr->tcpstateflags & UIP_STOPPED)) {
-      if(uip_outstanding(uip_connr)) {
-	goto drop;
-      }
-      uip_add_rcv_nxt(1 + uip_len);
-      uip_flags |= UIP_CLOSE;
-      if(uip_len > 0) {
-	uip_flags |= UIP_NEWDATA;
-      }
-      UIP_APPCALL();
-      uip_connr->len = 1;
-      uip_connr->tcpstateflags = UIP_LAST_ACK;
-      uip_connr->nrtx = 0;
-    tcp_send_finack:
-      BUF->flags = TCP_FIN | TCP_ACK;
-      goto tcp_send_nodata;
-    }
-
-    /* Check the URG flag. If this is set, the segment carries urgent
-       data that we must pass to the application. */
-    if((BUF->flags & TCP_URG) != 0) {
-#if UIP_URGDATA > 0
-      uip_urglen = (BUF->urgp[0] << 8) | BUF->urgp[1];
-      if(uip_urglen > uip_len) {
-	/* There is more urgent data in the next segment to come. */
-	uip_urglen = uip_len;
-      }
-      uip_add_rcv_nxt(uip_urglen);
-      uip_len -= uip_urglen;
-      uip_urgdata = uip_appdata;
-      uip_appdata += uip_urglen;
-    } else {
-      uip_urglen = 0;
-#else /* UIP_URGDATA > 0 */
-      uip_appdata = ((char *)uip_appdata) + ((BUF->urgp[0] << 8) | BUF->urgp[1]);
-      uip_len -= (BUF->urgp[0] << 8) | BUF->urgp[1];
-#endif /* UIP_URGDATA > 0 */
-    }
-
-    /* If uip_len > 0 we have TCP data in the packet, and we flag this
-       by setting the UIP_NEWDATA flag and update the sequence number
-       we acknowledge. If the application has stopped the dataflow
-       using uip_stop(), we must not accept any data packets from the
-       remote host. */
-    if(uip_len > 0 && !(uip_connr->tcpstateflags & UIP_STOPPED)) {
-      uip_flags |= UIP_NEWDATA;
-      uip_add_rcv_nxt(uip_len);
-    }
-
-    /* Check if the available buffer space advertised by the other end
-       is smaller than the initial MSS for this connection. If so, we
-       set the current MSS to the window size to ensure that the
-       application does not send more data than the other end can
-       handle.
-
-       If the remote host advertises a zero window, we set the MSS to
-       the initial MSS so that the application will send an entire MSS
-       of data. This data will not be acknowledged by the receiver,
-       and the application will retransmit it. This is called the
-       "persistent timer" and uses the retransmission mechanism.
-    */
-    tmp16 = ((u16_t)BUF->wnd[0] << 8) + (u16_t)BUF->wnd[1];
-    if(tmp16 > uip_connr->initialmss ||
-       tmp16 == 0) {
-      tmp16 = uip_connr->initialmss;
-    }
-    uip_connr->mss = tmp16;
-
-    /* If this packet constitutes an ACK for outstanding data (flagged
-       by the UIP_ACKDATA flag, we should call the application since it
-       might want to send more data. If the incoming packet had data
-       from the peer (as flagged by the UIP_NEWDATA flag), the
-       application must also be notified.
-
-       When the application is called, the global variable uip_len
-       contains the length of the incoming data. The application can
-       access the incoming data through the global pointer
-       uip_appdata, which usually points UIP_IPTCPH_LEN + UIP_LLH_LEN
-       bytes into the uip_buf array.
-
-       If the application wishes to send any data, this data should be
-       put into the uip_appdata and the length of the data should be
-       put into uip_len. If the application don't have any data to
-       send, uip_len must be set to 0. */
-    if(uip_flags & (UIP_NEWDATA | UIP_ACKDATA)) {
-      uip_slen = 0;
-      UIP_APPCALL();
-
-    appsend:
-
-      if(uip_flags & UIP_ABORT) {
-	uip_slen = 0;
-	uip_connr->tcpstateflags = UIP_CLOSED;
-	BUF->flags = TCP_RST | TCP_ACK;
-	goto tcp_send_nodata;
-      }
-
-      if(uip_flags & UIP_CLOSE) {
-	uip_slen = 0;
-	uip_connr->len = 1;
-	uip_connr->tcpstateflags = UIP_FIN_WAIT_1;
-	uip_connr->nrtx = 0;
-	BUF->flags = TCP_FIN | TCP_ACK;
-	goto tcp_send_nodata;
-      }
-
-      /* If uip_slen > 0, the application has data to be sent. */
-      if(uip_slen > 0) {
-
-	/* If the connection has acknowledged data, the contents of
-	   the ->len variable should be discarded. */
-	if((uip_flags & UIP_ACKDATA) != 0) {
-	  uip_connr->len = 0;
-	}
-
-	/* If the ->len variable is non-zero the connection has
-	   already data in transit and cannot send anymore right
-	   now. */
-	if(uip_connr->len == 0) {
-
-	  /* The application cannot send more than what is allowed by
-	     the mss (the minumum of the MSS and the available
-	     window). */
-	  if(uip_slen > uip_connr->mss) {
-	    uip_slen = uip_connr->mss;
-	  }
-
-	  /* Remember how much data we send out now so that we know
-	     when everything has been acknowledged. */
-	  uip_connr->len = uip_slen;
-	} else {
-
-	  /* If the application already had unacknowledged data, we
-	     make sure that the application does not send (i.e.,
-	     retransmit) out more than it previously sent out. */
-	  uip_slen = uip_connr->len;
-	}
-      }
-      uip_connr->nrtx = 0;
-    apprexmit:
-      uip_appdata = uip_sappdata;
-
-      /* If the application has data to be sent, or if the incoming
-         packet had new data in it, we must send out a packet. */
-      if(uip_slen > 0 && uip_connr->len > 0) {
-	/* Add the length of the IP and TCP headers. */
-	uip_len = uip_connr->len + UIP_TCPIP_HLEN;
-	/* We always set the ACK flag in response packets. */
-	BUF->flags = TCP_ACK | TCP_PSH;
-	/* Send the packet. */
-	goto tcp_send_noopts;
-      }
-      /* If there is no data to send, just send out a pure ACK if
-	 there is newdata. */
-      if(uip_flags & UIP_NEWDATA) {
-	uip_len = UIP_TCPIP_HLEN;
-	BUF->flags = TCP_ACK;
-	goto tcp_send_noopts;
-      }
-    }
-    goto drop;
-  case UIP_LAST_ACK:
-    /* We can close this connection if the peer has acknowledged our
-       FIN. This is indicated by the UIP_ACKDATA flag. */
-    if(uip_flags & UIP_ACKDATA) {
-      uip_connr->tcpstateflags = UIP_CLOSED;
-      uip_flags = UIP_CLOSE;
-      UIP_APPCALL();
-    }
-    break;
-
-  case UIP_FIN_WAIT_1:
-    /* The application has closed the connection, but the remote host
-       hasn't closed its end yet. Thus we do nothing but wait for a
-       FIN from the other side. */
-    if(uip_len > 0) {
-      uip_add_rcv_nxt(uip_len);
-    }
-    if(BUF->flags & TCP_FIN) {
-      if(uip_flags & UIP_ACKDATA) {
-	uip_connr->tcpstateflags = UIP_TIME_WAIT;
-	uip_connr->timer = 0;
-	uip_connr->len = 0;
-      } else {
-	uip_connr->tcpstateflags = UIP_CLOSING;
-      }
-      uip_add_rcv_nxt(1);
-      uip_flags = UIP_CLOSE;
-      UIP_APPCALL();
-      goto tcp_send_ack;
-    } else if(uip_flags & UIP_ACKDATA) {
-      uip_connr->tcpstateflags = UIP_FIN_WAIT_2;
-      uip_connr->len = 0;
-      goto drop;
-    }
-    if(uip_len > 0) {
-      goto tcp_send_ack;
-    }
-    goto drop;
-
-  case UIP_FIN_WAIT_2:
-    if(uip_len > 0) {
-      uip_add_rcv_nxt(uip_len);
-    }
-    if(BUF->flags & TCP_FIN) {
-      uip_connr->tcpstateflags = UIP_TIME_WAIT;
-      uip_connr->timer = 0;
-      uip_add_rcv_nxt(1);
-      uip_flags = UIP_CLOSE;
-      UIP_APPCALL();
-      goto tcp_send_ack;
-    }
-    if(uip_len > 0) {
-      goto tcp_send_ack;
-    }
-    goto drop;
-
-  case UIP_TIME_WAIT:
-    goto tcp_send_ack;
-
-  case UIP_CLOSING:
-    if(uip_flags & UIP_ACKDATA) {
-      uip_connr->tcpstateflags = UIP_TIME_WAIT;
-      uip_connr->timer = 0;
-    }
-  }
-  goto drop;
-
-  /* We jump here when we are ready to send the packet, and just want
-     to set the appropriate TCP sequence numbers in the TCP header. */
- tcp_send_ack:
-  BUF->flags = TCP_ACK;
-
- tcp_send_nodata:
-  uip_len = UIP_IPTCPH_LEN;
-
- tcp_send_noopts:
-  BUF->tcpoffset = (UIP_TCPH_LEN / 4) << 4;
-
-  /* We're done with the input processing. We are now ready to send a
-     reply. Our job is to fill in all the fields of the TCP and IP
-     headers before calculating the checksum and finally send the
-     packet. */
- tcp_send:
-  BUF->ackno[0] = uip_connr->rcv_nxt[0];
-  BUF->ackno[1] = uip_connr->rcv_nxt[1];
-  BUF->ackno[2] = uip_connr->rcv_nxt[2];
-  BUF->ackno[3] = uip_connr->rcv_nxt[3];
-
-  BUF->seqno[0] = uip_connr->snd_nxt[0];
-  BUF->seqno[1] = uip_connr->snd_nxt[1];
-  BUF->seqno[2] = uip_connr->snd_nxt[2];
-  BUF->seqno[3] = uip_connr->snd_nxt[3];
-
-  BUF->proto = UIP_PROTO_TCP;
-
-  BUF->srcport  = uip_connr->lport;
-  BUF->destport = uip_connr->rport;
-
-  uip_ipaddr_copy(&BUF->srcipaddr, &uip_hostaddr);
-  uip_ipaddr_copy(&BUF->destipaddr, &uip_connr->ripaddr);
-
-  if(uip_connr->tcpstateflags & UIP_STOPPED) {
-    /* If the connection has issued uip_stop(), we advertise a zero
-       window so that the remote host will stop sending data. */
-    BUF->wnd[0] = BUF->wnd[1] = 0;
-  } else {
-    BUF->wnd[0] = ((UIP_RECEIVE_WINDOW) >> 8);
-    BUF->wnd[1] = ((UIP_RECEIVE_WINDOW) & 0xff);
-  }
-
- tcp_send_noconn:
-  BUF->ttl = UIP_TTL;
-#if UIP_CONF_IPV6
-  /* For IPv6, the IP length field does not include the IPv6 IP header
-     length. */
-  BUF->len[0] = ((uip_len - UIP_IPH_LEN) >> 8);
-  BUF->len[1] = ((uip_len - UIP_IPH_LEN) & 0xff);
-#else /* UIP_CONF_IPV6 */
-  BUF->len[0] = (uip_len >> 8);
-  BUF->len[1] = (uip_len & 0xff);
-#endif /* UIP_CONF_IPV6 */
-
-  BUF->urgp[0] = BUF->urgp[1] = 0;
-
-  /* Calculate TCP checksum. */
-  BUF->tcpchksum = 0;
-  BUF->tcpchksum = ~(uip_tcpchksum());
-
- ip_send_nolen:
-#if UIP_CONF_IPV6
-  BUF->vtc = 0x60;
-  BUF->tcflow = 0x00;
-  BUF->flow = 0x00;
-#else /* UIP_CONF_IPV6 */
-  BUF->vhl = 0x45;
-  BUF->tos = 0;
-  BUF->ipoffset[0] = BUF->ipoffset[1] = 0;
-  ++ipid;
-  BUF->ipid[0] = ipid >> 8;
-  BUF->ipid[1] = ipid & 0xff;
-  /* Calculate IP checksum. */
-  BUF->ipchksum = 0;
-  BUF->ipchksum = ~(uip_ipchksum());
-  DEBUG_PRINTF("uip ip_send_nolen: checksum 0x%04x\n", uip_ipchksum());
-#endif /* UIP_CONF_IPV6 */
-  UIP_STAT(++uip_stat.tcp.sent);
-#if UIP_CONF_IPV6
- send:
-#endif /* UIP_CONF_IPV6 */
-  DEBUG_PRINTF("Sending packet with length %d (%d)\n", uip_len,
-	       (BUF->len[0] << 8) | BUF->len[1]);
-
-  UIP_STAT(++uip_stat.ip.sent);
-  /* Return and let the caller do the actual transmission. */
-  uip_flags = 0;
-  return;
-
- drop:
-  uip_len = 0;
-  uip_flags = 0;
-  return;
-}
-/*---------------------------------------------------------------------------*/
-u16_t
-htons(u16_t val)
-{
-  return HTONS(val);
-}
-
-u32_t
-htonl(u32_t val)
-{
-  return HTONL(val);
-}
-/*---------------------------------------------------------------------------*/
-void
-uip_send(const void *data, int len)
-{
-  int copylen;
-#define MIN(a,b) ((a) < (b)? (a): (b))
-  copylen = MIN(len, UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN -
-		(int)((char *)uip_sappdata - (char *)&uip_buf[UIP_LLH_LEN + UIP_TCPIP_HLEN]));
-  if(copylen > 0) {
-    uip_slen = copylen;
-    if(data != uip_sappdata) {
-      memcpy(uip_sappdata, (data), uip_slen);
-    }
-  }
-}
-/*---------------------------------------------------------------------------*/
-/** @} */
-#endif /* UIP_CONF_IPV6 */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip.h
deleted file mode 100644
index 7b87a2c77c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip.h
+++ /dev/null
@@ -1,2130 +0,0 @@
-
-/**
- * \addtogroup uip
- * @{
- */
-
-/**
- * \file
- * Header file for the uIP TCP/IP stack.
- * \author  Adam Dunkels <adam@dunkels.com>
- * \author  Julien Abeille <jabeille@cisco.com> (IPv6 related code)
- * \author  Mathilde Durvy <mdurvy@cisco.com> (IPv6 related code)
- *
- * The uIP TCP/IP stack header file contains definitions for a number
- * of C macros that are used by uIP programs as well as internal uIP
- * structures, TCP/IP header structures and function declarations.
- *
- */
-
-/*
- * Copyright (c) 2001-2003, Adam Dunkels.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * This file is part of the uIP TCP/IP stack.
- *
- * $Id: uip.h,v 1.24 2009/04/06 13:18:50 nvt-se Exp $
- *
- */
-
-#ifndef __UIP_H__
-#define __UIP_H__
-
-#include "uipopt.h"
-
-/**
- * Representation of an IP address.
- *
- */
-#if UIP_CONF_IPV6
-typedef union uip_ip6addr_t {
-  u8_t  u8[16];			/* Initialiser, must come first!!! */
-  u16_t u16[8];
-} uip_ip6addr_t;
-
-typedef uip_ip6addr_t uip_ipaddr_t;
-#else /* UIP_CONF_IPV6 */
-typedef union uip_ip4addr_t {
-  u8_t  u8[4];			/* Initialiser, must come first!!! */
-  u16_t u16[2];
-#if 0
-  u32_t u32;
-#endif
-} uip_ip4addr_t;
-typedef uip_ip4addr_t uip_ipaddr_t;
-#endif /* UIP_CONF_IPV6 */
-
-
-/*---------------------------------------------------------------------------*/
-
-/** \brief 16 bit 802.15.4 address */
-struct uip_802154_shortaddr {
-  u8_t addr[2];
-};
-/** \brief 64 bit 802.15.4 address */
-struct uip_802154_longaddr {
-  u8_t addr[8];
-};
-
-/** \brief 802.11 address */
-struct uip_80211_addr {
-  u8_t addr[6];
-};
-
-/** \brief 802.3 address */
-struct uip_eth_addr {
-  u8_t addr[6];
-};
-
-#if UIP_CONF_LL_802154
-/** \brief 802.15.4 address */
-typedef struct uip_802154_longaddr uip_lladdr_t;
-#define UIP_802154_SHORTADDR_LEN 2
-#define UIP_802154_LONGADDR_LEN  8
-#define UIP_LLADDR_LEN UIP_802154_LONGADDR_LEN
-#else /*UIP_CONF_LL_802154*/
-#if UIP_CONF_LL_80211
-/** \brief 802.11 address */
-typedef struct uip_80211_addr uip_lladdr_t;
-#define UIP_LLADDR_LEN 6
-#else /*UIP_CONF_LL_80211*/
-/** \brief Ethernet address */
-typedef struct uip_eth_addr uip_lladdr_t;
-#define UIP_LLADDR_LEN 6
-#endif /*UIP_CONF_LL_80211*/
-#endif /*UIP_CONF_LL_802154*/
-
-/*---------------------------------------------------------------------------*/
-/* First, the functions that should be called from the
- * system. Initialization, the periodic timer, and incoming packets are
- * handled by the following three functions.
- */
-/**
- * \defgroup uipconffunc uIP configuration functions
- * @{
- *
- * The uIP configuration functions are used for setting run-time
- * parameters in uIP such as IP addresses.
- */
-
-/**
- * Set the IP address of this host.
- *
- * The IP address is represented as a 4-byte array where the first
- * octet of the IP address is put in the first member of the 4-byte
- * array.
- *
- * Example:
- \code
-
- uip_ipaddr_t addr;
-
- uip_ipaddr(&addr, 192,168,1,2);
- uip_sethostaddr(&addr);
-
- \endcode
- * \param addr A pointer to an IP address of type uip_ipaddr_t;
- *
- * \sa uip_ipaddr()
- *
- * \hideinitializer
- */
-#define uip_sethostaddr(addr) uip_ipaddr_copy(&uip_hostaddr, (addr))
-
-/**
- * Get the IP address of this host.
- *
- * The IP address is represented as a 4-byte array where the first
- * octet of the IP address is put in the first member of the 4-byte
- * array.
- *
- * Example:
- \code
- uip_ipaddr_t hostaddr;
-
- uip_gethostaddr(&hostaddr);
- \endcode
- * \param addr A pointer to a uip_ipaddr_t variable that will be
- * filled in with the currently configured IP address.
- *
- * \hideinitializer
- */
-#define uip_gethostaddr(addr) uip_ipaddr_copy((addr), &uip_hostaddr)
-
-/**
- * Set the default router's IP address.
- *
- * \param addr A pointer to a uip_ipaddr_t variable containing the IP
- * address of the default router.
- *
- * \sa uip_ipaddr()
- *
- * \hideinitializer
- */
-#define uip_setdraddr(addr) uip_ipaddr_copy(&uip_draddr, (addr))
-
-/**
- * Set the netmask.
- *
- * \param addr A pointer to a uip_ipaddr_t variable containing the IP
- * address of the netmask.
- *
- * \sa uip_ipaddr()
- *
- * \hideinitializer
- */
-#define uip_setnetmask(addr) uip_ipaddr_copy(&uip_netmask, (addr))
-
-
-/**
- * Get the default router's IP address.
- *
- * \param addr A pointer to a uip_ipaddr_t variable that will be
- * filled in with the IP address of the default router.
- *
- * \hideinitializer
- */
-#define uip_getdraddr(addr) uip_ipaddr_copy((addr), &uip_draddr)
-
-/**
- * Get the netmask.
- *
- * \param addr A pointer to a uip_ipaddr_t variable that will be
- * filled in with the value of the netmask.
- *
- * \hideinitializer
- */
-#define uip_getnetmask(addr) uip_ipaddr_copy((addr), &uip_netmask)
-
-/** @} */
-
-/**
- * \defgroup uipinit uIP initialization functions
- * @{
- *
- * The uIP initialization functions are used for booting uIP.
- */
-
-/**
- * uIP initialization function.
- *
- * This function should be called at boot up to initialize the uIP
- * TCP/IP stack.
- */
-void uip_init(void);
-
-/**
- * uIP initialization function.
- *
- * This function may be used at boot time to set the initial ip_id.
- */
-void uip_setipid(u16_t id);
-
-/** @} */
-
-/**
- * \defgroup uipdevfunc uIP device driver functions
- * @{
- *
- * These functions are used by a network device driver for interacting
- * with uIP.
- */
-
-/**
- * Process an incoming packet.
- *
- * This function should be called when the device driver has received
- * a packet from the network. The packet from the device driver must
- * be present in the uip_buf buffer, and the length of the packet
- * should be placed in the uip_len variable.
- *
- * When the function returns, there may be an outbound packet placed
- * in the uip_buf packet buffer. If so, the uip_len variable is set to
- * the length of the packet. If no packet is to be sent out, the
- * uip_len variable is set to 0.
- *
- * The usual way of calling the function is presented by the source
- * code below.
- \code
- uip_len = devicedriver_poll();
- if(uip_len > 0) {
- uip_input();
- if(uip_len > 0) {
- devicedriver_send();
- }
- }
- \endcode
- *
- * \note If you are writing a uIP device driver that needs ARP
- * (Address Resolution Protocol), e.g., when running uIP over
- * Ethernet, you will need to call the uIP ARP code before calling
- * this function:
- \code
- #define BUF ((struct uip_eth_hdr *)&uip_buf[0])
- uip_len = ethernet_devicedrver_poll();
- if(uip_len > 0) {
- if(BUF->type == HTONS(UIP_ETHTYPE_IP)) {
- uip_arp_ipin();
- uip_input();
- if(uip_len > 0) {
- uip_arp_out();
- ethernet_devicedriver_send();
- }
- } else if(BUF->type == HTONS(UIP_ETHTYPE_ARP)) {
- uip_arp_arpin();
- if(uip_len > 0) {
- ethernet_devicedriver_send();
- }
- }
- \endcode
- *
- * \hideinitializer
- */
-#define uip_input()        uip_process(UIP_DATA)
-
-
-/**
- * Periodic processing for a connection identified by its number.
- *
- * This function does the necessary periodic processing (timers,
- * polling) for a uIP TCP connection, and should be called when the
- * periodic uIP timer goes off. It should be called for every
- * connection, regardless of whether they are open of closed.
- *
- * When the function returns, it may have an outbound packet waiting
- * for service in the uIP packet buffer, and if so the uip_len
- * variable is set to a value larger than zero. The device driver
- * should be called to send out the packet.
- *
- * The usual way of calling the function is through a for() loop like
- * this:
- \code
- for(i = 0; i < UIP_CONNS; ++i) {
- uip_periodic(i);
- if(uip_len > 0) {
- devicedriver_send();
- }
- }
- \endcode
- *
- * \note If you are writing a uIP device driver that needs ARP
- * (Address Resolution Protocol), e.g., when running uIP over
- * Ethernet, you will need to call the uip_arp_out() function before
- * calling the device driver:
- \code
- for(i = 0; i < UIP_CONNS; ++i) {
- uip_periodic(i);
- if(uip_len > 0) {
- uip_arp_out();
- ethernet_devicedriver_send();
- }
- }
- \endcode
- *
- * \param conn The number of the connection which is to be periodically polled.
- *
- * \hideinitializer
- */
-#if UIP_TCP
-#define uip_periodic(conn) do { uip_conn = &uip_conns[conn];    \
-    uip_process(UIP_TIMER); } while (0)
-
-/**
- *
- *
- */
-#define uip_conn_active(conn) (uip_conns[conn].tcpstateflags != UIP_CLOSED)
-
-/**
- * Perform periodic processing for a connection identified by a pointer
- * to its structure.
- *
- * Same as uip_periodic() but takes a pointer to the actual uip_conn
- * struct instead of an integer as its argument. This function can be
- * used to force periodic processing of a specific connection.
- *
- * \param conn A pointer to the uip_conn struct for the connection to
- * be processed.
- *
- * \hideinitializer
- */
-#define uip_periodic_conn(conn) do { uip_conn = conn;   \
-    uip_process(UIP_TIMER); } while (0)
-
-/**
- * Request that a particular connection should be polled.
- *
- * Similar to uip_periodic_conn() but does not perform any timer
- * processing. The application is polled for new data.
- *
- * \param conn A pointer to the uip_conn struct for the connection to
- * be processed.
- *
- * \hideinitializer
- */
-#define uip_poll_conn(conn) do { uip_conn = conn;       \
-    uip_process(UIP_POLL_REQUEST); } while (0)
-
-#endif /* UIP_TCP */
-
-#if UIP_UDP
-/**
- * Periodic processing for a UDP connection identified by its number.
- *
- * This function is essentially the same as uip_periodic(), but for
- * UDP connections. It is called in a similar fashion as the
- * uip_periodic() function:
- \code
- for(i = 0; i < UIP_UDP_CONNS; i++) {
- uip_udp_periodic(i);
- if(uip_len > 0) {
- devicedriver_send();
- }
- }
- \endcode
- *
- * \note As for the uip_periodic() function, special care has to be
- * taken when using uIP together with ARP and Ethernet:
- \code
- for(i = 0; i < UIP_UDP_CONNS; i++) {
- uip_udp_periodic(i);
- if(uip_len > 0) {
- uip_arp_out();
- ethernet_devicedriver_send();
- }
- }
- \endcode
- *
- * \param conn The number of the UDP connection to be processed.
- *
- * \hideinitializer
- */
-#define uip_udp_periodic(conn) do { uip_udp_conn = &uip_udp_conns[conn]; \
-    uip_process(UIP_UDP_TIMER); } while(0)
-
-/**
- * Periodic processing for a UDP connection identified by a pointer to
- * its structure.
- *
- * Same as uip_udp_periodic() but takes a pointer to the actual
- * uip_conn struct instead of an integer as its argument. This
- * function can be used to force periodic processing of a specific
- * connection.
- *
- * \param conn A pointer to the uip_udp_conn struct for the connection
- * to be processed.
- *
- * \hideinitializer
- */
-#define uip_udp_periodic_conn(conn) do { uip_udp_conn = conn;   \
-    uip_process(UIP_UDP_TIMER); } while(0)
-#endif /* UIP_UDP */
-
-/** \brief Abandon the reassembly of the current packet */
-void uip_reass_over(void);
-
-/**
- * The uIP packet buffer.
- *
- * The uip_buf array is used to hold incoming and outgoing
- * packets. The device driver should place incoming data into this
- * buffer. When sending data, the device driver should read the link
- * level headers and the TCP/IP headers from this buffer. The size of
- * the link level headers is configured by the UIP_LLH_LEN define.
- *
- * \note The application data need not be placed in this buffer, so
- * the device driver must read it from the place pointed to by the
- * uip_appdata pointer as illustrated by the following example:
- \code
- void
- devicedriver_send(void)
- {
- hwsend(&uip_buf[0], UIP_LLH_LEN);
- if(uip_len <= UIP_LLH_LEN + UIP_TCPIP_HLEN) {
- hwsend(&uip_buf[UIP_LLH_LEN], uip_len - UIP_LLH_LEN);
- } else {
- hwsend(&uip_buf[UIP_LLH_LEN], UIP_TCPIP_HLEN);
- hwsend(uip_appdata, uip_len - UIP_TCPIP_HLEN - UIP_LLH_LEN);
- }
- }
- \endcode
-*/
-extern u8_t uip_buf[UIP_BUFSIZE+2];
-
-
-
-/** @} */
-
-/*---------------------------------------------------------------------------*/
-/* Functions that are used by the uIP application program. Opening and
- * closing connections, sending and receiving data, etc. is all
- * handled by the functions below.
- */
-/**
- * \defgroup uipappfunc uIP application functions
- * @{
- *
- * Functions used by an application running of top of uIP.
- */
-
-/**
- * Start listening to the specified port.
- *
- * \note Since this function expects the port number in network byte
- * order, a conversion using HTONS() or htons() is necessary.
- *
- \code
- uip_listen(HTONS(80));
- \endcode
- *
- * \param port A 16-bit port number in network byte order.
- */
-void uip_listen(u16_t port);
-
-/**
- * Stop listening to the specified port.
- *
- * \note Since this function expects the port number in network byte
- * order, a conversion using HTONS() or htons() is necessary.
- *
- \code
- uip_unlisten(HTONS(80));
- \endcode
- *
- * \param port A 16-bit port number in network byte order.
- */
-void uip_unlisten(u16_t port);
-
-/**
- * Connect to a remote host using TCP.
- *
- * This function is used to start a new connection to the specified
- * port on the specified host. It allocates a new connection identifier,
- * sets the connection to the SYN_SENT state and sets the
- * retransmission timer to 0. This will cause a TCP SYN segment to be
- * sent out the next time this connection is periodically processed,
- * which usually is done within 0.5 seconds after the call to
- * uip_connect().
- *
- * \note This function is available only if support for active open
- * has been configured by defining UIP_ACTIVE_OPEN to 1 in uipopt.h.
- *
- * \note Since this function requires the port number to be in network
- * byte order, a conversion using HTONS() or htons() is necessary.
- *
- \code
- uip_ipaddr_t ipaddr;
-
- uip_ipaddr(&ipaddr, 192,168,1,2);
- uip_connect(&ipaddr, HTONS(80));
- \endcode
- *
- * \param ripaddr The IP address of the remote host.
- *
- * \param port A 16-bit port number in network byte order.
- *
- * \return A pointer to the uIP connection identifier for the new connection,
- * or NULL if no connection could be allocated.
- *
- */
-struct uip_conn *uip_connect(uip_ipaddr_t *ripaddr, u16_t port);
-
-
-
-/**
- * \internal
- *
- * Check if a connection has outstanding (i.e., unacknowledged) data.
- *
- * \param conn A pointer to the uip_conn structure for the connection.
- *
- * \hideinitializer
- */
-#define uip_outstanding(conn) ((conn)->len)
-
-/**
- * Send data on the current connection.
- *
- * This function is used to send out a single segment of TCP
- * data. Only applications that have been invoked by uIP for event
- * processing can send data.
- *
- * The amount of data that actually is sent out after a call to this
- * function is determined by the maximum amount of data TCP allows. uIP
- * will automatically crop the data so that only the appropriate
- * amount of data is sent. The function uip_mss() can be used to query
- * uIP for the amount of data that actually will be sent.
- *
- * \note This function does not guarantee that the sent data will
- * arrive at the destination. If the data is lost in the network, the
- * application will be invoked with the uip_rexmit() event being
- * set. The application will then have to resend the data using this
- * function.
- *
- * \param data A pointer to the data which is to be sent.
- *
- * \param len The maximum amount of data bytes to be sent.
- *
- * \hideinitializer
- */
-void uip_send(const void *data, int len);
-
-/**
- * The length of any incoming data that is currently available (if available)
- * in the uip_appdata buffer.
- *
- * The test function uip_data() must first be used to check if there
- * is any data available at all.
- *
- * \hideinitializer
- */
-/*void uip_datalen(void);*/
-#define uip_datalen()       uip_len
-
-/**
- * The length of any out-of-band data (urgent data) that has arrived
- * on the connection.
- *
- * \note The configuration parameter UIP_URGDATA must be set for this
- * function to be enabled.
- *
- * \hideinitializer
- */
-#define uip_urgdatalen()    uip_urglen
-
-/**
- * Close the current connection.
- *
- * This function will close the current connection in a nice way.
- *
- * \hideinitializer
- */
-#define uip_close()         (uip_flags = UIP_CLOSE)
-
-/**
- * Abort the current connection.
- *
- * This function will abort (reset) the current connection, and is
- * usually used when an error has occurred that prevents using the
- * uip_close() function.
- *
- * \hideinitializer
- */
-#define uip_abort()         (uip_flags = UIP_ABORT)
-
-/**
- * Tell the sending host to stop sending data.
- *
- * This function will close our receiver's window so that we stop
- * receiving data for the current connection.
- *
- * \hideinitializer
- */
-#define uip_stop()          (uip_conn->tcpstateflags |= UIP_STOPPED)
-
-/**
- * Find out if the current connection has been previously stopped with
- * uip_stop().
- *
- * \hideinitializer
- */
-#define uip_stopped(conn)   ((conn)->tcpstateflags & UIP_STOPPED)
-
-/**
- * Restart the current connection, if is has previously been stopped
- * with uip_stop().
- *
- * This function will open the receiver's window again so that we
- * start receiving data for the current connection.
- *
- * \hideinitializer
- */
-#define uip_restart()         do { uip_flags |= UIP_NEWDATA;    \
-    uip_conn->tcpstateflags &= ~UIP_STOPPED;                    \
-  } while(0)
-
-
-/* uIP tests that can be made to determine in what state the current
-   connection is, and what the application function should do. */
-
-/**
- * Is the current connection a UDP connection?
- *
- * This function checks whether the current connection is a UDP connection.
- *
- * \hideinitializer
- *
- */
-#define uip_udpconnection() (uip_conn == NULL)
-
-/**
- * Is new incoming data available?
- *
- * Will reduce to non-zero if there is new data for the application
- * present at the uip_appdata pointer. The size of the data is
- * available through the uip_len variable.
- *
- * \hideinitializer
- */
-#define uip_newdata()   (uip_flags & UIP_NEWDATA)
-
-/**
- * Has previously sent data been acknowledged?
- *
- * Will reduce to non-zero if the previously sent data has been
- * acknowledged by the remote host. This means that the application
- * can send new data.
- *
- * \hideinitializer
- */
-#define uip_acked()   (uip_flags & UIP_ACKDATA)
-
-/**
- * Has the connection just been connected?
- *
- * Reduces to non-zero if the current connection has been connected to
- * a remote host. This will happen both if the connection has been
- * actively opened (with uip_connect()) or passively opened (with
- * uip_listen()).
- *
- * \hideinitializer
- */
-#define uip_connected() (uip_flags & UIP_CONNECTED)
-
-/**
- * Has the connection been closed by the other end?
- *
- * Is non-zero if the connection has been closed by the remote
- * host. The application may then do the necessary clean-ups.
- *
- * \hideinitializer
- */
-#define uip_closed()    (uip_flags & UIP_CLOSE)
-
-/**
- * Has the connection been aborted by the other end?
- *
- * Non-zero if the current connection has been aborted (reset) by the
- * remote host.
- *
- * \hideinitializer
- */
-#define uip_aborted()    (uip_flags & UIP_ABORT)
-
-/**
- * Has the connection timed out?
- *
- * Non-zero if the current connection has been aborted due to too many
- * retransmissions.
- *
- * \hideinitializer
- */
-#define uip_timedout()    (uip_flags & UIP_TIMEDOUT)
-
-/**
- * Do we need to retransmit previously data?
- *
- * Reduces to non-zero if the previously sent data has been lost in
- * the network, and the application should retransmit it. The
- * application should send the exact same data as it did the last
- * time, using the uip_send() function.
- *
- * \hideinitializer
- */
-#define uip_rexmit()     (uip_flags & UIP_REXMIT)
-
-/**
- * Is the connection being polled by uIP?
- *
- * Is non-zero if the reason the application is invoked is that the
- * current connection has been idle for a while and should be
- * polled.
- *
- * The polling event can be used for sending data without having to
- * wait for the remote host to send data.
- *
- * \hideinitializer
- */
-#define uip_poll()       (uip_flags & UIP_POLL)
-
-/**
- * Get the initial maximum segment size (MSS) of the current
- * connection.
- *
- * \hideinitializer
- */
-#define uip_initialmss()             (uip_conn->initialmss)
-
-/**
- * Get the current maximum segment size that can be sent on the current
- * connection.
- *
- * The current maximum segment size that can be sent on the
- * connection is computed from the receiver's window and the MSS of
- * the connection (which also is available by calling
- * uip_initialmss()).
- *
- * \hideinitializer
- */
-#define uip_mss()             (uip_conn->mss)
-
-/**
- * Set up a new UDP connection.
- *
- * This function sets up a new UDP connection. The function will
- * automatically allocate an unused local port for the new
- * connection. However, another port can be chosen by using the
- * uip_udp_bind() call, after the uip_udp_new() function has been
- * called.
- *
- * Example:
- \code
- uip_ipaddr_t addr;
- struct uip_udp_conn *c;
-
- uip_ipaddr(&addr, 192,168,2,1);
- c = uip_udp_new(&addr, HTONS(12345));
- if(c != NULL) {
- uip_udp_bind(c, HTONS(12344));
- }
- \endcode
- * \param ripaddr The IP address of the remote host.
- *
- * \param rport The remote port number in network byte order.
- *
- * \return The uip_udp_conn structure for the new connection or NULL
- * if no connection could be allocated.
- */
-struct uip_udp_conn *uip_udp_new(const uip_ipaddr_t *ripaddr, u16_t rport);
-
-/**
- * Removed a UDP connection.
- *
- * \param conn A pointer to the uip_udp_conn structure for the connection.
- *
- * \hideinitializer
- */
-#define uip_udp_remove(conn) (conn)->lport = 0
-
-/**
- * Bind a UDP connection to a local port.
- *
- * \param conn A pointer to the uip_udp_conn structure for the
- * connection.
- *
- * \param port The local port number, in network byte order.
- *
- * \hideinitializer
- */
-#define uip_udp_bind(conn, port) (conn)->lport = port
-
-/**
- * Send a UDP datagram of length len on the current connection.
- *
- * This function can only be called in response to a UDP event (poll
- * or newdata). The data must be present in the uip_buf buffer, at the
- * place pointed to by the uip_appdata pointer.
- *
- * \param len The length of the data in the uip_buf buffer.
- *
- * \hideinitializer
- */
-#define uip_udp_send(len) uip_send((char *)uip_appdata, len)
-
-/** @} */
-
-/* uIP convenience and converting functions. */
-
-/**
- * \defgroup uipconvfunc uIP conversion functions
- * @{
- *
- * These functions can be used for converting between different data
- * formats used by uIP.
- */
-
-/**
- * Convert an IP address to four bytes separated by commas.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr;
- printf("ipaddr=%d.%d.%d.%d\n", uip_ipaddr_to_quad(&ipaddr));
- \endcode
- *
- * \param a A pointer to a uip_ipaddr_t.
- * \hideinitializer
- */
-#define uip_ipaddr_to_quad(a) (a)->u8[0],(a)->u8[1],(a)->u8[2],(a)->u8[3]
-
-/**
- * Construct an IP address from four bytes.
- *
- * This function constructs an IP address of the type that uIP handles
- * internally from four bytes. The function is handy for specifying IP
- * addresses to use with e.g. the uip_connect() function.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr;
- struct uip_conn *c;
-
- uip_ipaddr(&ipaddr, 192,168,1,2);
- c = uip_connect(&ipaddr, HTONS(80));
- \endcode
- *
- * \param addr A pointer to a uip_ipaddr_t variable that will be
- * filled in with the IP address.
- *
- * \param addr0 The first octet of the IP address.
- * \param addr1 The second octet of the IP address.
- * \param addr2 The third octet of the IP address.
- * \param addr3 The forth octet of the IP address.
- *
- * \hideinitializer
- */
-#define uip_ipaddr(addr, addr0,addr1,addr2,addr3) do {  \
-    (addr)->u8[0] = addr0;                              \
-    (addr)->u8[1] = addr1;                              \
-    (addr)->u8[2] = addr2;                              \
-    (addr)->u8[3] = addr3;                              \
-  } while(0)
-
-/**
- * Construct an IPv6 address from eight 16-bit words.
- *
- * This function constructs an IPv6 address.
- *
- * \hideinitializer
- */
-#define uip_ip6addr(addr, addr0,addr1,addr2,addr3,addr4,addr5,addr6,addr7) do { \
-    (addr)->u16[0] = HTONS(addr0);                                      \
-    (addr)->u16[1] = HTONS(addr1);                                      \
-    (addr)->u16[2] = HTONS(addr2);                                      \
-    (addr)->u16[3] = HTONS(addr3);                                      \
-    (addr)->u16[4] = HTONS(addr4);                                      \
-    (addr)->u16[5] = HTONS(addr5);                                      \
-    (addr)->u16[6] = HTONS(addr6);                                      \
-    (addr)->u16[7] = HTONS(addr7);                                      \
-  } while(0)
-
-/**
- * Construct an IPv6 address from sixteen 8-bit words.
- *
- * This function constructs an IPv6 address.
- *
- * \hideinitializer
- */
-#define uip_ip6addr_u8(addr, addr0,addr1,addr2,addr3,addr4,addr5,addr6,addr7,addr8,addr9,addr10,addr11,addr12,addr13,addr14,addr15) do { \
-    (addr)->u8[0] = addr0;                                       \
-    (addr)->u8[1] = addr1;                                       \
-    (addr)->u8[2] = addr2;                                       \
-    (addr)->u8[3] = addr3;                                       \
-    (addr)->u8[4] = addr4;                                       \
-    (addr)->u8[5] = addr5;                                       \
-    (addr)->u8[6] = addr6;                                       \
-    (addr)->u8[7] = addr7;                                       \
-    (addr)->u8[8] = addr8;                                       \
-    (addr)->u8[9] = addr9;                                       \
-    (addr)->u8[10] = addr10;                                     \
-    (addr)->u8[11] = addr11;                                     \
-    (addr)->u8[12] = addr12;                                     \
-    (addr)->u8[13] = addr13;                                     \
-    (addr)->u8[14] = addr14;                                     \
-    (addr)->u8[15] = addr15;                                     \
-  } while(0)
-
-
-/**
- * Copy an IP address to another IP address.
- *
- * Copies an IP address from one place to another.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr1, ipaddr2;
-
- uip_ipaddr(&ipaddr1, 192,16,1,2);
- uip_ipaddr_copy(&ipaddr2, &ipaddr1);
- \endcode
- *
- * \param dest The destination for the copy.
- * \param src The source from where to copy.
- *
- * \hideinitializer
- */
-#ifndef uip_ipaddr_copy
-#define uip_ipaddr_copy(dest, src) (*(dest) = *(src))
-#endif
-
-/**
- * Compare two IP addresses
- *
- * Compares two IP addresses.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr1, ipaddr2;
-
- uip_ipaddr(&ipaddr1, 192,16,1,2);
- if(uip_ipaddr_cmp(&ipaddr2, &ipaddr1)) {
- printf("They are the same");
- }
- \endcode
- *
- * \param addr1 The first IP address.
- * \param addr2 The second IP address.
- *
- * \hideinitializer
- */
-#if !UIP_CONF_IPV6
-#define uip_ipaddr_cmp(addr1, addr2) ((addr1)->u16[0] == (addr2)->u16[0] && \
-				      (addr1)->u16[1] == (addr2)->u16[1])
-#else /* !UIP_CONF_IPV6 */
-#define uip_ipaddr_cmp(addr1, addr2) (memcmp(addr1, addr2, sizeof(uip_ip6addr_t)) == 0)
-#endif /* !UIP_CONF_IPV6 */
-
-/**
- * Compare two IP addresses with netmasks
- *
- * Compares two IP addresses with netmasks. The masks are used to mask
- * out the bits that are to be compared.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr1, ipaddr2, mask;
-
- uip_ipaddr(&mask, 255,255,255,0);
- uip_ipaddr(&ipaddr1, 192,16,1,2);
- uip_ipaddr(&ipaddr2, 192,16,1,3);
- if(uip_ipaddr_maskcmp(&ipaddr1, &ipaddr2, &mask)) {
- printf("They are the same");
- }
- \endcode
- *
- * \param addr1 The first IP address.
- * \param addr2 The second IP address.
- * \param mask The netmask.
- *
- * \hideinitializer
- */
-#if !UIP_CONF_IPV6
-#define uip_ipaddr_maskcmp(addr1, addr2, mask)          \
-  (((((u16_t *)addr1)[0] & ((u16_t *)mask)[0]) ==       \
-    (((u16_t *)addr2)[0] & ((u16_t *)mask)[0])) &&      \
-   ((((u16_t *)addr1)[1] & ((u16_t *)mask)[1]) ==       \
-    (((u16_t *)addr2)[1] & ((u16_t *)mask)[1])))
-#else
-#define uip_ipaddr_prefixcmp(addr1, addr2, length) (memcmp(addr1, addr2, length>>3) == 0)
-#endif
-
-
-/**
- * Check if an address is a broadcast address for a network.
- *
- * Checks if an address is the broadcast address for a network. The
- * network is defined by an IP address that is on the network and the
- * network's netmask.
- *
- * \param addr The IP address.
- * \param netaddr The network's IP address.
- * \param netmask The network's netmask.
- *
- * \hideinitializer
- */
-/*#define uip_ipaddr_isbroadcast(addr, netaddr, netmask)
-  ((uip_ipaddr_t *)(addr)).u16 & ((uip_ipaddr_t *)(addr)).u16*/
-
-
-
-/**
- * Mask out the network part of an IP address.
- *
- * Masks out the network part of an IP address, given the address and
- * the netmask.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr1, ipaddr2, netmask;
-
- uip_ipaddr(&ipaddr1, 192,16,1,2);
- uip_ipaddr(&netmask, 255,255,255,0);
- uip_ipaddr_mask(&ipaddr2, &ipaddr1, &netmask);
- \endcode
- *
- * In the example above, the variable "ipaddr2" will contain the IP
- * address 192.168.1.0.
- *
- * \param dest Where the result is to be placed.
- * \param src The IP address.
- * \param mask The netmask.
- *
- * \hideinitializer
- */
-#define uip_ipaddr_mask(dest, src, mask) do {                           \
-    ((u16_t *)dest)[0] = ((u16_t *)src)[0] & ((u16_t *)mask)[0];        \
-    ((u16_t *)dest)[1] = ((u16_t *)src)[1] & ((u16_t *)mask)[1];        \
-  } while(0)
-
-/**
- * Pick the first octet of an IP address.
- *
- * Picks out the first octet of an IP address.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr;
- u8_t octet;
-
- uip_ipaddr(&ipaddr, 1,2,3,4);
- octet = uip_ipaddr1(&ipaddr);
- \endcode
- *
- * In the example above, the variable "octet" will contain the value 1.
- *
- * \hideinitializer
- */
-#define uip_ipaddr1(addr) ((addr)->u8[0])
-
-/**
- * Pick the second octet of an IP address.
- *
- * Picks out the second octet of an IP address.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr;
- u8_t octet;
-
- uip_ipaddr(&ipaddr, 1,2,3,4);
- octet = uip_ipaddr2(&ipaddr);
- \endcode
- *
- * In the example above, the variable "octet" will contain the value 2.
- *
- * \hideinitializer
- */
-#define uip_ipaddr2(addr) ((addr)->u8[1])
-
-/**
- * Pick the third octet of an IP address.
- *
- * Picks out the third octet of an IP address.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr;
- u8_t octet;
-
- uip_ipaddr(&ipaddr, 1,2,3,4);
- octet = uip_ipaddr3(&ipaddr);
- \endcode
- *
- * In the example above, the variable "octet" will contain the value 3.
- *
- * \hideinitializer
- */
-#define uip_ipaddr3(addr) ((addr)->u8[2])
-
-/**
- * Pick the fourth octet of an IP address.
- *
- * Picks out the fourth octet of an IP address.
- *
- * Example:
- \code
- uip_ipaddr_t ipaddr;
- u8_t octet;
-
- uip_ipaddr(&ipaddr, 1,2,3,4);
- octet = uip_ipaddr4(&ipaddr);
- \endcode
- *
- * In the example above, the variable "octet" will contain the value 4.
- *
- * \hideinitializer
- */
-#define uip_ipaddr4(addr) ((addr)->u8[3])
-
-/**
- * Convert 16-bit quantity from host byte order to network byte order.
- *
- * This macro is primarily used for converting constants from host
- * byte order to network byte order. For converting variables to
- * network byte order, use the htons() function instead.
- *
- * \hideinitializer
- */
-#ifndef HTONS
-#   if UIP_BYTE_ORDER == UIP_BIG_ENDIAN
-#      define HTONS(n) (n)
-#      define HTONL(n) (n)
-#   else /* UIP_BYTE_ORDER == UIP_BIG_ENDIAN */
-#      define HTONS(n) (u16_t)((((u16_t) (n)) << 8) | (((u16_t) (n)) >> 8))
-#      define HTONL(n) (((u32_t)HTONS(n) << 16) | HTONS((u32_t)(n) >> 16))
-#   endif /* UIP_BYTE_ORDER == UIP_BIG_ENDIAN */
-#else
-#error "HTONS already defined!"
-#endif /* HTONS */
-
-/**
- * Convert 16-bit quantity from host byte order to network byte order.
- *
- * This function is primarily used for converting variables from host
- * byte order to network byte order. For converting constants to
- * network byte order, use the HTONS() macro instead.
- */
-#ifndef htons
-u16_t htons(u16_t val);
-#endif /* htons */
-#ifndef ntohs
-#define ntohs htons
-#endif
-
-#ifndef htonl
-u32_t htonl(u32_t val);
-#endif /* htonl */
-#ifndef ntohl
-#define ntohl htonl
-#endif
-
-/** @} */
-
-/**
- * Pointer to the application data in the packet buffer.
- *
- * This pointer points to the application data when the application is
- * called. If the application wishes to send data, the application may
- * use this space to write the data into before calling uip_send().
- */
-extern void *uip_appdata;
-
-#if UIP_URGDATA > 0
-/* u8_t *uip_urgdata:
- *
- * This pointer points to any urgent data that has been received. Only
- * present if compiled with support for urgent data (UIP_URGDATA).
- */
-extern void *uip_urgdata;
-#endif /* UIP_URGDATA > 0 */
-
-
-/**
- * \defgroup uipdrivervars Variables used in uIP device drivers
- * @{
- *
- * uIP has a few global variables that are used in device drivers for
- * uIP.
- */
-
-/**
- * The length of the packet in the uip_buf buffer.
- *
- * The global variable uip_len holds the length of the packet in the
- * uip_buf buffer.
- *
- * When the network device driver calls the uIP input function,
- * uip_len should be set to the length of the packet in the uip_buf
- * buffer.
- *
- * When sending packets, the device driver should use the contents of
- * the uip_len variable to determine the length of the outgoing
- * packet.
- *
- */
-extern u16_t uip_len;
-
-/**
- * The length of the extension headers
- */
-extern u8_t uip_ext_len;
-/** @} */
-
-#if UIP_URGDATA > 0
-extern u16_t uip_urglen, uip_surglen;
-#endif /* UIP_URGDATA > 0 */
-
-
-/**
- * Representation of a uIP TCP connection.
- *
- * The uip_conn structure is used for identifying a connection. All
- * but one field in the structure are to be considered read-only by an
- * application. The only exception is the appstate field whose purpose
- * is to let the application store application-specific state (e.g.,
- * file pointers) for the connection. The type of this field is
- * configured in the "uipopt.h" header file.
- */
-struct uip_conn {
-  uip_ipaddr_t ripaddr;   /**< The IP address of the remote host. */
-
-  u16_t lport;        /**< The local TCP port, in network byte order. */
-  u16_t rport;        /**< The local remote TCP port, in network byte
-			 order. */
-
-  u8_t rcv_nxt[4];    /**< The sequence number that we expect to
-			 receive next. */
-  u8_t snd_nxt[4];    /**< The sequence number that was last sent by
-                         us. */
-  u16_t len;          /**< Length of the data that was previously sent. */
-  u16_t mss;          /**< Current maximum segment size for the
-			 connection. */
-  u16_t initialmss;   /**< Initial maximum segment size for the
-			 connection. */
-  u8_t sa;            /**< Retransmission time-out calculation state
-			 variable. */
-  u8_t sv;            /**< Retransmission time-out calculation state
-			 variable. */
-  u8_t rto;           /**< Retransmission time-out. */
-  u8_t tcpstateflags; /**< TCP state and flags. */
-  u8_t timer;         /**< The retransmission timer. */
-  u8_t nrtx;          /**< The number of retransmissions for the last
-			 segment sent. */
-
-  /** The application state. */
-  uip_tcp_appstate_t appstate;
-};
-
-
-/**
- * Pointer to the current TCP connection.
- *
- * The uip_conn pointer can be used to access the current TCP
- * connection.
- */
-
-extern struct uip_conn *uip_conn;
-#if UIP_TCP
-/* The array containing all uIP connections. */
-extern struct uip_conn uip_conns[UIP_CONNS];
-#endif
-
-/**
- * \addtogroup uiparch
- * @{
- */
-
-/**
- * 4-byte array used for the 32-bit sequence number calculations.
- */
-extern u8_t uip_acc32[4];
-/** @} */
-
-/**
- * Representation of a uIP UDP connection.
- */
-struct uip_udp_conn {
-  uip_ipaddr_t ripaddr;   /**< The IP address of the remote peer. */
-  u16_t lport;        /**< The local port number in network byte order. */
-  u16_t rport;        /**< The remote port number in network byte order. */
-  u8_t  ttl;          /**< Default time-to-live. */
-
-  /** The application state. */
-  uip_udp_appstate_t appstate;
-};
-
-/**
- * The current UDP connection.
- */
-extern struct uip_udp_conn *uip_udp_conn;
-extern struct uip_udp_conn uip_udp_conns[UIP_UDP_CONNS];
-
-struct uip_router {
-  int (*activate)(void);
-  int (*deactivate)(void);
-  uip_ipaddr_t *(*lookup)(uip_ipaddr_t *destipaddr, uip_ipaddr_t *nexthop);
-};
-
-#if UIP_CONF_ROUTER
-extern const struct uip_router *uip_router;
-
-/**
- * uIP routing driver registration function.
- */
-void uip_router_register(const struct uip_router *router);
-#endif /*UIP_CONF_ROUTER*/
-
-#if UIP_CONF_ICMP6
-struct uip_icmp6_conn {
-  uip_icmp6_appstate_t appstate;
-};
-extern struct uip_icmp6_conn uip_icmp6_conns;
-#endif /*UIP_CONF_ICMP6*/
-
-/**
- * The uIP TCP/IP statistics.
- *
- * This is the variable in which the uIP TCP/IP statistics are gathered.
- */
-#if UIP_STATISTICS == 1
-extern struct uip_stats uip_stat;
-#define UIP_STAT(s) s
-#else
-#define UIP_STAT(s)
-#endif /* UIP_STATISTICS == 1 */
-
-/**
- * The structure holding the TCP/IP statistics that are gathered if
- * UIP_STATISTICS is set to 1.
- *
- */
-struct uip_stats {
-  struct {
-    uip_stats_t recv;     /**< Number of received packets at the IP
-			     layer. */
-    uip_stats_t sent;     /**< Number of sent packets at the IP
-			     layer. */
-    uip_stats_t forwarded;/**< Number of forwarded packets at the IP
-			     layer. */
-    uip_stats_t drop;     /**< Number of dropped packets at the IP
-			     layer. */
-    uip_stats_t vhlerr;   /**< Number of packets dropped due to wrong
-			     IP version or header length. */
-    uip_stats_t hblenerr; /**< Number of packets dropped due to wrong
-			     IP length, high byte. */
-    uip_stats_t lblenerr; /**< Number of packets dropped due to wrong
-			     IP length, low byte. */
-    uip_stats_t fragerr;  /**< Number of packets dropped since they
-			     were IP fragments. */
-    uip_stats_t chkerr;   /**< Number of packets dropped due to IP
-			     checksum errors. */
-    uip_stats_t protoerr; /**< Number of packets dropped since they
-			     were neither ICMP, UDP nor TCP. */
-  } ip;                   /**< IP statistics. */
-  struct {
-    uip_stats_t recv;     /**< Number of received ICMP packets. */
-    uip_stats_t sent;     /**< Number of sent ICMP packets. */
-    uip_stats_t drop;     /**< Number of dropped ICMP packets. */
-    uip_stats_t typeerr;  /**< Number of ICMP packets with a wrong
-			     type. */
-    uip_stats_t chkerr;   /**< Number of ICMP packets with a bad
-			     checksum. */
-  } icmp;                 /**< ICMP statistics. */
-#if UIP_TCP
-  struct {
-    uip_stats_t recv;     /**< Number of received TCP segments. */
-    uip_stats_t sent;     /**< Number of sent TCP segments. */
-    uip_stats_t drop;     /**< Number of dropped TCP segments. */
-    uip_stats_t chkerr;   /**< Number of TCP segments with a bad
-			     checksum. */
-    uip_stats_t ackerr;   /**< Number of TCP segments with a bad ACK
-			     number. */
-    uip_stats_t rst;      /**< Number of received TCP RST (reset) segments. */
-    uip_stats_t rexmit;   /**< Number of retransmitted TCP segments. */
-    uip_stats_t syndrop;  /**< Number of dropped SYNs due to too few
-			     connections was available. */
-    uip_stats_t synrst;   /**< Number of SYNs for closed ports,
-			     triggering a RST. */
-  } tcp;                  /**< TCP statistics. */
-#endif
-#if UIP_UDP
-  struct {
-    uip_stats_t drop;     /**< Number of dropped UDP segments. */
-    uip_stats_t recv;     /**< Number of received UDP segments. */
-    uip_stats_t sent;     /**< Number of sent UDP segments. */
-    uip_stats_t chkerr;   /**< Number of UDP segments with a bad
-			     checksum. */
-  } udp;                  /**< UDP statistics. */
-#endif /* UIP_UDP */
-#if UIP_CONF_IPV6
-  struct {
-    uip_stats_t drop;     /**< Number of dropped ND6 packets. */
-    uip_stats_t recv;     /**< Number of received ND6 packets */
-    uip_stats_t sent;     /**< Number of sent ND6 packets */
-  } nd6;
-#endif /*UIP_CONF_IPV6*/
-};
-
-
-/*---------------------------------------------------------------------------*/
-/* All the stuff below this point is internal to uIP and should not be
- * used directly by an application or by a device driver.
- */
-/*---------------------------------------------------------------------------*/
-
-
-
-/* u8_t uip_flags:
- *
- * When the application is called, uip_flags will contain the flags
- * that are defined in this file. Please read below for more
- * information.
- */
-extern u8_t uip_flags;
-
-/* The following flags may be set in the global variable uip_flags
-   before calling the application callback. The UIP_ACKDATA,
-   UIP_NEWDATA, and UIP_CLOSE flags may both be set at the same time,
-   whereas the others are mutually exclusive. Note that these flags
-   should *NOT* be accessed directly, but only through the uIP
-   functions/macros. */
-
-#define UIP_ACKDATA   1     /* Signifies that the outstanding data was
-			       acked and the application should send
-			       out new data instead of retransmitting
-			       the last data. */
-#define UIP_NEWDATA   2     /* Flags the fact that the peer has sent
-			       us new data. */
-#define UIP_REXMIT    4     /* Tells the application to retransmit the
-			       data that was last sent. */
-#define UIP_POLL      8     /* Used for polling the application, to
-			       check if the application has data that
-			       it wants to send. */
-#define UIP_CLOSE     16    /* The remote host has closed the
-			       connection, thus the connection has
-			       gone away. Or the application signals
-			       that it wants to close the
-			       connection. */
-#define UIP_ABORT     32    /* The remote host has aborted the
-			       connection, thus the connection has
-			       gone away. Or the application signals
-			       that it wants to abort the
-			       connection. */
-#define UIP_CONNECTED 64    /* We have got a connection from a remote
-                               host and have set up a new connection
-                               for it, or an active connection has
-                               been successfully established. */
-
-#define UIP_TIMEDOUT  128   /* The connection has been aborted due to
-			       too many retransmissions. */
-
-
-/**
- * \brief process the options within a hop by hop or destination option header
- * \retval 0: nothing to send,
- * \retval 1: drop pkt
- * \retval 2: ICMP error message to send
-*/
-/*static u8_t
-uip_ext_hdr_options_process(); */
-
-/* uip_process(flag):
- *
- * The actual uIP function which does all the work.
- */
-void uip_process(u8_t flag);
-
-  /* The following flags are passed as an argument to the uip_process()
-   function. They are used to distinguish between the two cases where
-   uip_process() is called. It can be called either because we have
-   incoming data that should be processed, or because the periodic
-   timer has fired. These values are never used directly, but only in
-   the macros defined in this file. */
-
-#define UIP_DATA          1     /* Tells uIP that there is incoming
-				   data in the uip_buf buffer. The
-				   length of the data is stored in the
-				   global variable uip_len. */
-#define UIP_TIMER         2     /* Tells uIP that the periodic timer
-				   has fired. */
-#define UIP_POLL_REQUEST  3     /* Tells uIP that a connection should
-				   be polled. */
-#define UIP_UDP_SEND_CONN 4     /* Tells uIP that a UDP datagram
-				   should be constructed in the
-				   uip_buf buffer. */
-#if UIP_UDP
-#define UIP_UDP_TIMER     5
-#endif /* UIP_UDP */
-
-/* The TCP states used in the uip_conn->tcpstateflags. */
-#define UIP_CLOSED      0
-#define UIP_SYN_RCVD    1
-#define UIP_SYN_SENT    2
-#define UIP_ESTABLISHED 3
-#define UIP_FIN_WAIT_1  4
-#define UIP_FIN_WAIT_2  5
-#define UIP_CLOSING     6
-#define UIP_TIME_WAIT   7
-#define UIP_LAST_ACK    8
-#define UIP_TS_MASK     15
-
-#define UIP_STOPPED      16
-
-/* The TCP and IP headers. */
-struct uip_tcpip_hdr {
-#if UIP_CONF_IPV6
-  /* IPv6 header. */
-  u8_t vtc,
-    tcflow;
-  u16_t flow;
-  u8_t len[2];
-  u8_t proto, ttl;
-  uip_ip6addr_t srcipaddr, destipaddr;
-#else /* UIP_CONF_IPV6 */
-  /* IPv4 header. */
-  u8_t vhl,
-    tos,
-    len[2],
-    ipid[2],
-    ipoffset[2],
-    ttl,
-    proto;
-  u16_t ipchksum;
-  uip_ipaddr_t srcipaddr, destipaddr;
-#endif /* UIP_CONF_IPV6 */
-
-  /* TCP header. */
-  u16_t srcport,
-    destport;
-  u8_t seqno[4],
-    ackno[4],
-    tcpoffset,
-    flags,
-    wnd[2];
-  u16_t tcpchksum;
-  u8_t urgp[2];
-  u8_t optdata[4];
-};
-
-/* The ICMP and IP headers. */
-struct uip_icmpip_hdr {
-#if UIP_CONF_IPV6
-  /* IPv6 header. */
-  u8_t vtc,
-    tcf;
-  u16_t flow;
-  u8_t len[2];
-  u8_t proto, ttl;
-  uip_ip6addr_t srcipaddr, destipaddr;
-#else /* UIP_CONF_IPV6 */
-  /* IPv4 header. */
-  u8_t vhl,
-    tos,
-    len[2],
-    ipid[2],
-    ipoffset[2],
-    ttl,
-    proto;
-  u16_t ipchksum;
-  uip_ipaddr_t srcipaddr, destipaddr;
-#endif /* UIP_CONF_IPV6 */
-
-  /* ICMP header. */
-  u8_t type, icode;
-  u16_t icmpchksum;
-#if !UIP_CONF_IPV6
-  u16_t id, seqno;
-  u8_t payload[1];
-#endif /* !UIP_CONF_IPV6 */
-};
-
-
-/* The UDP and IP headers. */
-struct uip_udpip_hdr {
-#if UIP_CONF_IPV6
-  /* IPv6 header. */
-  u8_t vtc,
-    tcf;
-  u16_t flow;
-  u8_t len[2];
-  u8_t proto, ttl;
-  uip_ip6addr_t srcipaddr, destipaddr;
-#else /* UIP_CONF_IPV6 */
-  /* IP header. */
-  u8_t vhl,
-    tos,
-    len[2],
-    ipid[2],
-    ipoffset[2],
-    ttl,
-    proto;
-  u16_t ipchksum;
-  uip_ipaddr_t srcipaddr, destipaddr;
-#endif /* UIP_CONF_IPV6 */
-
-  /* UDP header. */
-  u16_t srcport,
-    destport;
-  u16_t udplen;
-  u16_t udpchksum;
-};
-
-/*
- * In IPv6 the length of the L3 headers before the transport header is
- * not fixed, due to the possibility to include extension option headers
- * after the IP header. hence we split here L3 and L4 headers
- */
-/* The IP header */
-struct uip_ip_hdr {
-#if UIP_CONF_IPV6
-  /* IPV6 header */
-  u8_t vtc;
-  u8_t tcflow;
-  u16_t flow;
-  u8_t len[2];
-  u8_t proto, ttl;
-  uip_ip6addr_t srcipaddr, destipaddr;
-#else /* UIP_CONF_IPV6 */
-  /* IPV4 header */
-  u8_t vhl,
-    tos,
-    len[2],
-    ipid[2],
-    ipoffset[2],
-    ttl,
-    proto;
-  u16_t ipchksum;
-  uip_ipaddr_t srcipaddr, destipaddr;
-#endif /* UIP_CONF_IPV6 */
-};
-
-
-/*
- * IPv6 extension option headers: we are able to process
- * the 4 extension headers defined in RFC2460 (IPv6):
- * - Hop by hop option header, destination option header:
- *   These two are not used by any core IPv6 protocol, hence
- *   we just read them and go to the next. They convey options,
- *   the options defined in RFC2460 are Pad1 and PadN, which do
- *   some padding, and that we do not need to read (the length
- *   field in the header is enough)
- * - Routing header: this one is most notably used by MIPv6,
- *   which we do not implement, hence we just read it and go
- *   to the next
- * - Fragmentation header: we read this header and are able to
- *   reassemble packets
- *
- * We do not offer any means to send packets with extension headers
- *
- * We do not implement Authentication and ESP headers, which are
- * used in IPSec and defined in RFC4302,4303,4305,4385
- */
-/* common header part */
-struct uip_ext_hdr {
-  u8_t next;
-  u8_t len;
-};
-
-/* Hop by Hop option header */
-struct uip_hbho_hdr {
-  u8_t next;
-  u8_t len;
-};
-
-/* destination option header */
-struct uip_desto_hdr {
-  u8_t next;
-  u8_t len;
-};
-
-/* We do not define structures for PAD1 and PADN options */
-
-/*
- * routing header
- * the routing header as 4 common bytes, then routing header type
- * specific data there are several types of routing header. Type 0 was
- * deprecated as per RFC5095 most notable other type is 2, used in
- * RFC3775 (MIPv6) here we do not implement MIPv6, so we just need to
- * parse the 4 first bytes
- */
-struct uip_routing_hdr {
-  u8_t next;
-  u8_t len;
-  u8_t routing_type;
-  u8_t seg_left;
-};
-
-/* fragmentation header */
-struct uip_frag_hdr {
-  u8_t next;
-  u8_t res;
-  u16_t offsetresmore;
-  u32_t id;
-};
-
-/*
- * an option within the destination or hop by hop option headers
- * it contains type an length, which is true for all options but PAD1
- */
-struct uip_ext_hdr_opt {
-  u8_t type;
-  u8_t len;
-};
-
-/* PADN option */
-struct uip_ext_hdr_opt_padn {
-  u8_t opt_type;
-  u8_t opt_len;
-};
-
-/* TCP header */
-struct uip_tcp_hdr {
-  u16_t srcport;
-  u16_t destport;
-  u8_t seqno[4];
-  u8_t ackno[4];
-  u8_t tcpoffset;
-  u8_t flags;
-  u8_t  wnd[2];
-  u16_t tcpchksum;
-  u8_t urgp[2];
-  u8_t optdata[4];
-};
-
-/* The ICMP headers. */
-struct uip_icmp_hdr {
-  u8_t type, icode;
-  u16_t icmpchksum;
-#if !UIP_CONF_IPV6
-  u16_t id, seqno;
-#endif /* !UIP_CONF_IPV6 */
-};
-
-
-/* The UDP headers. */
-struct uip_udp_hdr {
-  u16_t srcport;
-  u16_t destport;
-  u16_t udplen;
-  u16_t udpchksum;
-};
-
-
-/**
- * The buffer size available for user data in the \ref uip_buf buffer.
- *
- * This macro holds the available size for user data in the \ref
- * uip_buf buffer. The macro is intended to be used for checking
- * bounds of available user data.
- *
- * Example:
- \code
- snprintf(uip_appdata, UIP_APPDATA_SIZE, "%u\n", i);
- \endcode
- *
- * \hideinitializer
- */
-#define UIP_APPDATA_SIZE (UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN)
-#define UIP_APPDATA_PTR (void *)&uip_buf[UIP_LLH_LEN + UIP_TCPIP_HLEN]
-
-#define UIP_PROTO_ICMP  1
-#define UIP_PROTO_TCP   6
-#define UIP_PROTO_UDP   17
-#define UIP_PROTO_ICMP6 58
-
-
-#if UIP_CONF_IPV6
-/** @{ */
-/** \brief  extension headers types */
-#define UIP_PROTO_HBHO        0
-#define UIP_PROTO_DESTO       60
-#define UIP_PROTO_ROUTING     43
-#define UIP_PROTO_FRAG        44
-#define UIP_PROTO_NONE        59
-/** @} */
-
-/** @{ */
-/** \brief  Destination and Hop By Hop extension headers option types */
-#define UIP_EXT_HDR_OPT_PAD1  0
-#define UIP_EXT_HDR_OPT_PADN  1
-/** @} */
-
-/** @{ */
-/**
- * \brief Bitmaps for extension header processing
- *
- * When processing extension headers, we should record somehow which one we
- * see, because you cannot have twice the same header, except for destination
- * We store all this in one u8_t bitmap one bit for each header expected. The
- * order in the bitmap is the order recommended in RFC2460
- */
-#define UIP_EXT_HDR_BITMAP_HBHO 0x01
-#define UIP_EXT_HDR_BITMAP_DESTO1 0x02
-#define UIP_EXT_HDR_BITMAP_ROUTING 0x04
-#define UIP_EXT_HDR_BITMAP_FRAG 0x08
-#define UIP_EXT_HDR_BITMAP_AH 0x10
-#define UIP_EXT_HDR_BITMAP_ESP 0x20
-#define UIP_EXT_HDR_BITMAP_DESTO2 0x40
-/** @} */
-
-
-#endif /* UIP_CONF_IPV6 */
-
-
-/* Header sizes. */
-#if UIP_CONF_IPV6
-#define UIP_IPH_LEN    40
-#define UIP_FRAGH_LEN  8
-#else /* UIP_CONF_IPV6 */
-#define UIP_IPH_LEN    20    /* Size of IP header */
-#endif /* UIP_CONF_IPV6 */
-
-#define UIP_UDPH_LEN    8    /* Size of UDP header */
-#define UIP_TCPH_LEN   20    /* Size of TCP header */
-#ifdef UIP_IPH_LEN
-#define UIP_ICMPH_LEN   4    /* Size of ICMP header */
-#endif
-#define UIP_IPUDPH_LEN (UIP_UDPH_LEN + UIP_IPH_LEN)    /* Size of IP +
-                        * UDP
-							   * header */
-#define UIP_IPTCPH_LEN (UIP_TCPH_LEN + UIP_IPH_LEN)    /* Size of IP +
-							   * TCP
-							   * header */
-#define UIP_TCPIP_HLEN UIP_IPTCPH_LEN
-#define UIP_IPICMPH_LEN (UIP_IPH_LEN + UIP_ICMPH_LEN) /* size of ICMP
-                                                         + IP header */
-#define UIP_LLIPH_LEN (UIP_LLH_LEN + UIP_IPH_LEN)    /* size of L2
-                                                        + IP header */
-#if UIP_CONF_IPV6
-/**
- * The sums below are quite used in ND. When used for uip_buf, we
- * include link layer length when used for uip_len, we do not, hence
- * we need values with and without LLH_LEN we do not use capital
- * letters as these values are variable
- */
-#define uip_l2_l3_hdr_len (UIP_LLH_LEN + UIP_IPH_LEN + uip_ext_len)
-#define uip_l2_l3_icmp_hdr_len (UIP_LLH_LEN + UIP_IPH_LEN + uip_ext_len + UIP_ICMPH_LEN)
-#define uip_l3_hdr_len (UIP_IPH_LEN + uip_ext_len)
-#define uip_l3_icmp_hdr_len (UIP_IPH_LEN + uip_ext_len + UIP_ICMPH_LEN)
-#endif /*UIP_CONF_IPV6*/
-
-
-#if UIP_FIXEDADDR
-extern const uip_ipaddr_t uip_hostaddr, uip_netmask, uip_draddr;
-#else /* UIP_FIXEDADDR */
-extern uip_ipaddr_t uip_hostaddr, uip_netmask, uip_draddr;
-#endif /* UIP_FIXEDADDR */
-extern const uip_ipaddr_t uip_broadcast_addr;
-extern const uip_ipaddr_t uip_all_zeroes_addr;
-
-#if UIP_FIXEDETHADDR
-extern const uip_lladdr_t uip_lladdr;
-#else
-extern uip_lladdr_t uip_lladdr;
-#endif
-
-
-
-
-#ifdef UIP_CONF_IPV6
-/**
- * \brief Is IPv6 address a the unspecified address
- * a is of type uip_ipaddr_t
- */
-#define uip_is_addr_unspecified(a)               \
-  ((((a)->u16[0]) == 0) &&                       \
-   (((a)->u16[1]) == 0) &&                       \
-   (((a)->u16[2]) == 0) &&                       \
-   (((a)->u16[3]) == 0) &&                       \
-   (((a)->u16[4]) == 0) &&                       \
-   (((a)->u16[5]) == 0) &&                       \
-   (((a)->u16[6]) == 0) &&                       \
-   (((a)->u16[7]) == 0))
-
-/** \brief Is IPv6 address a the link local all-nodes multicast address */
-#define uip_is_addr_linklocal_allnodes_mcast(a)     \
-  ((((a)->u8[0]) == 0xff) &&                        \
-   (((a)->u8[1]) == 0x02) &&                        \
-   (((a)->u16[1]) == 0) &&                          \
-   (((a)->u16[2]) == 0) &&                          \
-   (((a)->u16[3]) == 0) &&                          \
-   (((a)->u16[4]) == 0) &&                          \
-   (((a)->u16[5]) == 0) &&                          \
-   (((a)->u16[6]) == 0) &&                          \
-   (((a)->u8[14]) == 0) &&                          \
-   (((a)->u8[15]) == 0x01))
-
-/** \brief set IP address a to unspecified */
-#define uip_create_unspecified(a) uip_ip6addr(a, 0, 0, 0, 0, 0, 0, 0, 0)
-
-/** \brief set IP address a to the link local all-nodes multicast address */
-#define uip_create_linklocal_allnodes_mcast(a) uip_ip6addr(a, 0xff02, 0, 0, 0, 0, 0, 0, 0x0001)
-
-/** \brief set IP address a to the link local all-routers multicast address */
-#define uip_create_linklocal_allrouters_mcast(a) uip_ip6addr(a, 0xff02, 0, 0, 0, 0, 0, 0, 0x0002)
-
-/**
- * \brief  is addr (a) a solicited node multicast address, see RFC3513
- *  a is of type uip_ipaddr_t*
- */
-#define uip_is_addr_solicited_node(a)           \
-  ((((a)->u8[0]) == 0xFF) &&                     \
-  (((a)->u8[1]) == 0x02) &&                     \
-  (((a)->u16[1]) == 0) &&                       \
-  (((a)->u16[2]) == 0) &&                       \
-  (((a)->u16[3]) == 0) &&                       \
-  (((a)->u16[4]) == 0) &&                       \
-  (((a)->u16[5]) == 1) &&                       \
-  (((a)->u8[12]) == 0xFF))
-
-/**
- * \briefput in b the solicited node address corresponding to address a
- * both a and b are of type uip_ipaddr_t*
- * */
-#define uip_create_solicited_node(a, b)    \
-  (((b)->u8[0]) = 0xFF);                        \
-  (((b)->u8[1]) = 0x02);                        \
-  (((b)->u16[1]) = 0);                          \
-  (((b)->u16[2]) = 0);                          \
-  (((b)->u16[3]) = 0);                          \
-  (((b)->u16[4]) = 0);                          \
-  (((b)->u8[10]) = 0);                          \
-  (((b)->u8[11]) = 0x01);                       \
-  (((b)->u8[12]) = 0xFF);                       \
-  (((b)->u8[13]) = ((a)->u8[13]));              \
-  (((b)->u16[7]) = ((a)->u16[7]))
-
-/**
- * \brief is addr (a) a link local unicast address, see RFC3513
- *  i.e. is (a) on prefix FE80::/10
- *  a is of type uip_ipaddr_t*
- */
-#define uip_is_addr_link_local(a) \
-  ((((a)->u8[0]) == 0xFE) && \
-  (((a)->u8[1]) == 0x80))
-
-/**
- * \brief was addr (a) forged based on the mac address m
- * a type is uip_ipaddr_t
- * m type is uiplladdr_t
- */
-#if UIP_CONF_LL_802154
-#define uip_is_addr_mac_addr_based(a, m) \
-  ((((a)->u8[8])  == (((m)->addr[0]) ^ 0x02)) &&   \
-   (((a)->u8[9])  == (m)->addr[1]) &&            \
-   (((a)->u8[10]) == (m)->addr[2]) &&            \
-   (((a)->u8[11]) == (m)->addr[3]) &&            \
-   (((a)->u8[12]) == (m)->addr[4]) &&            \
-   (((a)->u8[13]) == (m)->addr[5]) &&            \
-   (((a)->u8[14]) == (m)->addr[6]) &&            \
-   (((a)->u8[15]) == (m)->addr[7]))
-#else
-
-#define uip_is_addr_mac_addr_based(a, m) \
-  ((((a)->u8[8])  == (((m)->addr[0]) | 0x02)) &&   \
-   (((a)->u8[9])  == (m)->addr[1]) &&            \
-   (((a)->u8[10]) == (m)->addr[2]) &&            \
-   (((a)->u8[11]) == 0xff) &&            \
-   (((a)->u8[12]) == 0xfe) &&            \
-   (((a)->u8[13]) == (m)->addr[3]) &&            \
-   (((a)->u8[14]) == (m)->addr[4]) &&            \
-   (((a)->u8[15]) == (m)->addr[5]))
-
-#endif /*UIP_CONF_LL_802154*/
-
-/**
- * \brief is address a multicast address, see RFC 3513
- * a is of type uip_ipaddr_t*
- * */
-#define uip_is_addr_mcast(a)                    \
-  (((a)->u8[0]) == 0xFF)
-
-/**
- * \brief is group-id of multicast address a
- * the all nodes group-id
- */
-#define uip_is_mcast_group_id_all_nodes(a) \
-  ((((a)->u16[1])  == 0) &&                 \
-   (((a)->u16[2])  == 0) &&                 \
-   (((a)->u16[3])  == 0) &&                 \
-   (((a)->u16[4])  == 0) &&                 \
-   (((a)->u16[5])  == 0) &&                 \
-   (((a)->u16[6])  == 0) &&                 \
-   (((a)->u8[14])  == 0) &&                 \
-   (((a)->u8[15])  == 1))
-
-/**
- * \brief is group-id of multicast address a
- * the all routers group-id
- */
-#define uip_is_mcast_group_id_all_routers(a) \
-  ((((a)->u16[1])  == 0) &&                 \
-   (((a)->u16[2])  == 0) &&                 \
-   (((a)->u16[3])  == 0) &&                 \
-   (((a)->u16[4])  == 0) &&                 \
-   (((a)->u16[5])  == 0) &&                 \
-   (((a)->u16[6])  == 0) &&                 \
-   (((a)->u8[14])  == 0) &&                 \
-   (((a)->u8[15])  == 2))
-
-
-#endif /*UIP_CONF_IPV6*/
-
-/**
- * Calculate the Internet checksum over a buffer.
- *
- * The Internet checksum is the one's complement of the one's
- * complement sum of all 16-bit words in the buffer.
- *
- * See RFC1071.
- *
- * \param buf A pointer to the buffer over which the checksum is to be
- * computed.
- *
- * \param len The length of the buffer over which the checksum is to
- * be computed.
- *
- * \return The Internet checksum of the buffer.
- */
-u16_t uip_chksum(u16_t *buf, u16_t len);
-
-/**
- * Calculate the IP header checksum of the packet header in uip_buf.
- *
- * The IP header checksum is the Internet checksum of the 20 bytes of
- * the IP header.
- *
- * \return The IP header checksum of the IP header in the uip_buf
- * buffer.
- */
-u16_t uip_ipchksum(void);
-
-/**
- * Calculate the TCP checksum of the packet in uip_buf and uip_appdata.
- *
- * The TCP checksum is the Internet checksum of data contents of the
- * TCP segment, and a pseudo-header as defined in RFC793.
- *
- * \return The TCP checksum of the TCP segment in uip_buf and pointed
- * to by uip_appdata.
- */
-u16_t uip_tcpchksum(void);
-
-/**
- * Calculate the UDP checksum of the packet in uip_buf and uip_appdata.
- *
- * The UDP checksum is the Internet checksum of data contents of the
- * UDP segment, and a pseudo-header as defined in RFC768.
- *
- * \return The UDP checksum of the UDP segment in uip_buf and pointed
- * to by uip_appdata.
- */
-u16_t uip_udpchksum(void);
-
-/**
- * Calculate the ICMP checksum of the packet in uip_buf.
- *
- * \return The ICMP checksum of the ICMP packet in uip_buf
- */
-u16_t uip_icmp6chksum(void);
-
-
-#endif /* __UIP_H__ */
-
-
-/** @} */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip_arp.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip_arp.c
deleted file mode 100644
index fcb783b140..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip_arp.c
+++ /dev/null
@@ -1,432 +0,0 @@
-/**
- * \addtogroup uip
- * @{
- */
-
-/**
- * \defgroup uiparp uIP Address Resolution Protocol
- * @{
- *
- * The Address Resolution Protocol ARP is used for mapping between IP
- * addresses and link level addresses such as the Ethernet MAC
- * addresses. ARP uses broadcast queries to ask for the link level
- * address of a known IP address and the host which is configured with
- * the IP address for which the query was meant, will respond with its
- * link level address.
- *
- * \note This ARP implementation only supports Ethernet.
- */
-
-/**
- * \file
- * Implementation of the ARP Address Resolution Protocol.
- * \author Adam Dunkels <adam@dunkels.com>
- *
- */
-
-/*
- * Copyright (c) 2001-2003, Adam Dunkels.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * This file is part of the uIP TCP/IP stack.
- *
- * $Id: uip_arp.c,v 1.5 2008/02/07 01:35:00 adamdunkels Exp $
- *
- */
-
-
-#include "uip_arp.h"
-
-#include <string.h>
-
-struct arp_hdr {
-  struct uip_eth_hdr ethhdr;
-  u16_t hwtype;
-  u16_t protocol;
-  u8_t hwlen;
-  u8_t protolen;
-  u16_t opcode;
-  struct uip_eth_addr shwaddr;
-  uip_ipaddr_t sipaddr;
-  struct uip_eth_addr dhwaddr;
-  uip_ipaddr_t dipaddr;
-};
-
-struct ethip_hdr {
-  struct uip_eth_hdr ethhdr;
-  /* IP header. */
-  u8_t vhl,
-    tos,
-    len[2],
-    ipid[2],
-    ipoffset[2],
-    ttl,
-    proto;
-  u16_t ipchksum;
-  uip_ipaddr_t srcipaddr, destipaddr;
-};
-
-#define ARP_REQUEST 1
-#define ARP_REPLY   2
-
-#define ARP_HWTYPE_ETH 1
-
-struct arp_entry {
-  uip_ipaddr_t ipaddr;
-  struct uip_eth_addr ethaddr;
-  u8_t time;
-};
-
-static const struct uip_eth_addr broadcast_ethaddr =
-  {{0xff,0xff,0xff,0xff,0xff,0xff}};
-static const u16_t broadcast_ipaddr[2] = {0xffff,0xffff};
-
-static struct arp_entry arp_table[UIP_ARPTAB_SIZE];
-static uip_ipaddr_t ipaddr;
-static u8_t i, c;
-
-static u8_t arptime;
-static u8_t tmpage;
-
-#define BUF   ((struct arp_hdr *)&uip_buf[0])
-#define IPBUF ((struct ethip_hdr *)&uip_buf[0])
-
-#define DEBUG 0
-#if DEBUG
-#include <stdio.h>
-#define PRINTF(...) printf(__VA_ARGS__)
-#else
-#define PRINTF(...)
-#endif
-
-/*-----------------------------------------------------------------------------------*/
-/**
- * Initialize the ARP module.
- *
- */
-/*-----------------------------------------------------------------------------------*/
-void
-uip_arp_init(void)
-{
-  for(i = 0; i < UIP_ARPTAB_SIZE; ++i) {
-    memset(&arp_table[i].ipaddr, 0, 4);
-  }
-}
-/*-----------------------------------------------------------------------------------*/
-/**
- * Periodic ARP processing function.
- *
- * This function performs periodic timer processing in the ARP module
- * and should be called at regular intervals. The recommended interval
- * is 10 seconds between the calls.
- *
- */
-/*-----------------------------------------------------------------------------------*/
-void
-uip_arp_timer(void)
-{
-  struct arp_entry *tabptr = NULL;
-
-  ++arptime;
-  for(i = 0; i < UIP_ARPTAB_SIZE; ++i) {
-    tabptr = &arp_table[i];
-    if(uip_ipaddr_cmp(&tabptr->ipaddr, &uip_all_zeroes_addr) &&
-       arptime - tabptr->time >= UIP_ARP_MAXAGE) {
-      memset(&tabptr->ipaddr, 0, 4);
-    }
-  }
-
-}
-/*-----------------------------------------------------------------------------------*/
-static void
-uip_arp_update(uip_ipaddr_t *ipaddr, struct uip_eth_addr *ethaddr)
-{
-  register struct arp_entry *tabptr = NULL;
-  /* Walk through the ARP mapping table and try to find an entry to
-     update. If none is found, the IP -> MAC address mapping is
-     inserted in the ARP table. */
-  for(i = 0; i < UIP_ARPTAB_SIZE; ++i) {
-
-    tabptr = &arp_table[i];
-    /* Only check those entries that are actually in use. */
-    if(!uip_ipaddr_cmp(&tabptr->ipaddr, &uip_all_zeroes_addr)) {
-
-      /* Check if the source IP address of the incoming packet matches
-         the IP address in this ARP table entry. */
-      if(uip_ipaddr_cmp(ipaddr, &tabptr->ipaddr)) {
-
-	/* An old entry found, update this and return. */
-	memcpy(tabptr->ethaddr.addr, ethaddr->addr, 6);
-	tabptr->time = arptime;
-
-	return;
-      }
-    }
-  }
-
-  /* If we get here, no existing ARP table entry was found, so we
-     create one. */
-
-  /* First, we try to find an unused entry in the ARP table. */
-  for(i = 0; i < UIP_ARPTAB_SIZE; ++i) {
-    tabptr = &arp_table[i];
-    if(uip_ipaddr_cmp(&tabptr->ipaddr, &uip_all_zeroes_addr)) {
-      break;
-    }
-  }
-
-  /* If no unused entry is found, we try to find the oldest entry and
-     throw it away. */
-  if(i == UIP_ARPTAB_SIZE) {
-    tmpage = 0;
-    c = 0;
-    for(i = 0; i < UIP_ARPTAB_SIZE; ++i) {
-      tabptr = &arp_table[i];
-      if(arptime - tabptr->time > tmpage) {
-	tmpage = arptime - tabptr->time;
-	c = i;
-      }
-    }
-    i = c;
-    tabptr = &arp_table[i];
-  }
-
-  /* Now, i is the ARP table entry which we will fill with the new
-     information. */
-  uip_ipaddr_copy(&tabptr->ipaddr, ipaddr);
-  memcpy(tabptr->ethaddr.addr, ethaddr->addr, 6);
-  tabptr->time = arptime;
-}
-/*-----------------------------------------------------------------------------------*/
-/**
- * ARP processing for incoming IP packets
- *
- * This function should be called by the device driver when an IP
- * packet has been received. The function will check if the address is
- * in the ARP cache, and if so the ARP cache entry will be
- * refreshed. If no ARP cache entry was found, a new one is created.
- *
- * This function expects an IP packet with a prepended Ethernet header
- * in the uip_buf[] buffer, and the length of the packet in the global
- * variable uip_len.
- */
-/*-----------------------------------------------------------------------------------*/
-#if 0
-void
-uip_arp_ipin(void)
-{
-  uip_len -= sizeof(struct uip_eth_hdr);
-
-  /* Only insert/update an entry if the source IP address of the
-     incoming IP packet comes from a host on the local network. */
-  if((IPBUF->srcipaddr[0] & uip_netmask[0]) !=
-     (uip_hostaddr[0] & uip_netmask[0])) {
-    return;
-  }
-  if((IPBUF->srcipaddr[1] & uip_netmask[1]) !=
-     (uip_hostaddr[1] & uip_netmask[1])) {
-    return;
-  }
-  uip_arp_update(IPBUF->srcipaddr, &(IPBUF->ethhdr.src));
-
-  return;
-}
-#endif /* 0 */
-/*-----------------------------------------------------------------------------------*/
-/**
- * ARP processing for incoming ARP packets.
- *
- * This function should be called by the device driver when an ARP
- * packet has been received. The function will act differently
- * depending on the ARP packet type: if it is a reply for a request
- * that we previously sent out, the ARP cache will be filled in with
- * the values from the ARP reply. If the incoming ARP packet is an ARP
- * request for our IP address, an ARP reply packet is created and put
- * into the uip_buf[] buffer.
- *
- * When the function returns, the value of the global variable uip_len
- * indicates whether the device driver should send out a packet or
- * not. If uip_len is zero, no packet should be sent. If uip_len is
- * non-zero, it contains the length of the outbound packet that is
- * present in the uip_buf[] buffer.
- *
- * This function expects an ARP packet with a prepended Ethernet
- * header in the uip_buf[] buffer, and the length of the packet in the
- * global variable uip_len.
- */
-/*-----------------------------------------------------------------------------------*/
-void
-uip_arp_arpin(void)
-{
-  if(uip_len < sizeof(struct arp_hdr)) {
-    uip_len = 0;
-    return;
-  }
-  uip_len = 0;
-
-  switch(BUF->opcode) {
-  case HTONS(ARP_REQUEST):
-    /* ARP request. If it asked for our address, we send out a
-       reply. */
-    /*    if(BUF->dipaddr[0] == uip_hostaddr[0] &&
-	  BUF->dipaddr[1] == uip_hostaddr[1]) {*/
-    PRINTF("uip_arp_arpin: request for %d.%d.%d.%d (we are %d.%d.%d.%d)\n",
-	   BUF->dipaddr.u8[0], BUF->dipaddr.u8[1],
-	   BUF->dipaddr.u8[2], BUF->dipaddr.u8[3],
-	   uip_hostaddr.u8[0], uip_hostaddr.u8[1],
-	   uip_hostaddr.u8[2], uip_hostaddr.u8[3]);
-    if(uip_ipaddr_cmp(&BUF->dipaddr, &uip_hostaddr)) {
-      /* First, we register the one who made the request in our ARP
-	 table, since it is likely that we will do more communication
-	 with this host in the future. */
-      uip_arp_update(&BUF->sipaddr, &BUF->shwaddr);
-
-      BUF->opcode = HTONS(ARP_REPLY);
-
-      memcpy(BUF->dhwaddr.addr, BUF->shwaddr.addr, 6);
-      memcpy(BUF->shwaddr.addr, uip_ethaddr.addr, 6);
-      memcpy(BUF->ethhdr.src.addr, uip_ethaddr.addr, 6);
-      memcpy(BUF->ethhdr.dest.addr, BUF->dhwaddr.addr, 6);
-
-      uip_ipaddr_copy(&BUF->dipaddr, &BUF->sipaddr);
-      uip_ipaddr_copy(&BUF->sipaddr, &uip_hostaddr);
-
-      BUF->ethhdr.type = HTONS(UIP_ETHTYPE_ARP);
-      uip_len = sizeof(struct arp_hdr);
-    }
-    break;
-  case HTONS(ARP_REPLY):
-    /* ARP reply. We insert or update the ARP table if it was meant
-       for us. */
-    if(uip_ipaddr_cmp(&BUF->dipaddr, &uip_hostaddr)) {
-      uip_arp_update(&BUF->sipaddr, &BUF->shwaddr);
-    }
-    break;
-  }
-
-  return;
-}
-/*-----------------------------------------------------------------------------------*/
-/**
- * Prepend Ethernet header to an outbound IP packet and see if we need
- * to send out an ARP request.
- *
- * This function should be called before sending out an IP packet. The
- * function checks the destination IP address of the IP packet to see
- * what Ethernet MAC address that should be used as a destination MAC
- * address on the Ethernet.
- *
- * If the destination IP address is in the local network (determined
- * by logical ANDing of netmask and our IP address), the function
- * checks the ARP cache to see if an entry for the destination IP
- * address is found. If so, an Ethernet header is prepended and the
- * function returns. If no ARP cache entry is found for the
- * destination IP address, the packet in the uip_buf[] is replaced by
- * an ARP request packet for the IP address. The IP packet is dropped
- * and it is assumed that they higher level protocols (e.g., TCP)
- * eventually will retransmit the dropped packet.
- *
- * If the destination IP address is not on the local network, the IP
- * address of the default router is used instead.
- *
- * When the function returns, a packet is present in the uip_buf[]
- * buffer, and the length of the packet is in the global variable
- * uip_len.
- */
-/*-----------------------------------------------------------------------------------*/
-void
-uip_arp_out(void)
-{
-  struct arp_entry *tabptr = NULL;
-
-  /* Find the destination IP address in the ARP table and construct
-     the Ethernet header. If the destination IP address isn't on the
-     local network, we use the default router's IP address instead.
-
-     If not ARP table entry is found, we overwrite the original IP
-     packet with an ARP request for the IP address. */
-
-  /* First check if destination is a local broadcast. */
-  if(uip_ipaddr_cmp(&IPBUF->destipaddr, &uip_broadcast_addr)) {
-    memcpy(IPBUF->ethhdr.dest.addr, broadcast_ethaddr.addr, 6);
-  } else {
-    /* Check if the destination address is on the local network. */
-    if(!uip_ipaddr_maskcmp(&IPBUF->destipaddr, &uip_hostaddr, &uip_netmask)) {
-      /* Destination address was not on the local network, so we need to
-	 use the default router's IP address instead of the destination
-	 address when determining the MAC address. */
-      uip_ipaddr_copy(&ipaddr, &uip_draddr);
-    } else {
-      /* Else, we use the destination IP address. */
-      uip_ipaddr_copy(&ipaddr, &IPBUF->destipaddr);
-    }
-
-    for(i = 0; i < UIP_ARPTAB_SIZE; ++i) {
-      tabptr = &arp_table[i];
-      if(uip_ipaddr_cmp(&ipaddr, &tabptr->ipaddr)) {
-	break;
-      }
-    }
-
-    if(i == UIP_ARPTAB_SIZE) {
-      /* The destination address was not in our ARP table, so we
-	 overwrite the IP packet with an ARP request. */
-
-      memset(BUF->ethhdr.dest.addr, 0xff, 6);
-      memset(BUF->dhwaddr.addr, 0x00, 6);
-      memcpy(BUF->ethhdr.src.addr, uip_ethaddr.addr, 6);
-      memcpy(BUF->shwaddr.addr, uip_ethaddr.addr, 6);
-
-      uip_ipaddr_copy(&BUF->dipaddr, &ipaddr);
-      uip_ipaddr_copy(&BUF->sipaddr, &uip_hostaddr);
-      BUF->opcode = HTONS(ARP_REQUEST); /* ARP request. */
-      BUF->hwtype = HTONS(ARP_HWTYPE_ETH);
-      BUF->protocol = HTONS(UIP_ETHTYPE_IP);
-      BUF->hwlen = 6;
-      BUF->protolen = 4;
-      BUF->ethhdr.type = HTONS(UIP_ETHTYPE_ARP);
-
-      uip_appdata = &uip_buf[UIP_TCPIP_HLEN + UIP_LLH_LEN];
-
-      uip_len = sizeof(struct arp_hdr);
-      return;
-    }
-
-    /* Build an ethernet header. */
-    memcpy(IPBUF->ethhdr.dest.addr, tabptr->ethaddr.addr, 6);
-  }
-  memcpy(IPBUF->ethhdr.src.addr, uip_ethaddr.addr, 6);
-
-  IPBUF->ethhdr.type = HTONS(UIP_ETHTYPE_IP);
-
-  uip_len += sizeof(struct uip_eth_hdr);
-}
-/*-----------------------------------------------------------------------------------*/
-
-/** @} */
-/** @} */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip_arp.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip_arp.h
deleted file mode 100644
index 4e78ce7b77..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uip_arp.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/**
- * \addtogroup uip
- * @{
- */
-
-/**
- * \addtogroup uiparp
- * @{
- */
-
-/**
- * \file
- * Macros and definitions for the ARP module.
- * \author Adam Dunkels <adam@dunkels.com>
- */
-
-
-/*
- * Copyright (c) 2001-2003, Adam Dunkels.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * This file is part of the uIP TCP/IP stack.
- *
- * $Id: uip_arp.h,v 1.2 2006/08/26 23:58:45 oliverschmidt Exp $
- *
- */
-
-#ifndef __UIP_ARP_H__
-#define __UIP_ARP_H__
-
-#include "uip.h"
-
-
-extern struct uip_eth_addr uip_ethaddr;
-
-/**
- * The Ethernet header.
- */
-struct uip_eth_hdr {
-  struct uip_eth_addr dest;
-  struct uip_eth_addr src;
-  u16_t type;
-};
-
-#define UIP_ETHTYPE_ARP  0x0806
-#define UIP_ETHTYPE_IP   0x0800
-#define UIP_ETHTYPE_IPV6 0x86dd
-
-
-/* The uip_arp_init() function must be called before any of the other
-   ARP functions. */
-void uip_arp_init(void);
-
-/* The uip_arp_ipin() function should be called whenever an IP packet
-   arrives from the Ethernet. This function refreshes the ARP table or
-   inserts a new mapping if none exists. The function assumes that an
-   IP packet with an Ethernet header is present in the uip_buf buffer
-   and that the length of the packet is in the uip_len variable. */
-/*void uip_arp_ipin(void);*/
-#define uip_arp_ipin()
-
-/* The uip_arp_arpin() should be called when an ARP packet is received
-   by the Ethernet driver. This function also assumes that the
-   Ethernet frame is present in the uip_buf buffer. When the
-   uip_arp_arpin() function returns, the contents of the uip_buf
-   buffer should be sent out on the Ethernet if the uip_len variable
-   is > 0. */
-void uip_arp_arpin(void);
-
-/* The uip_arp_out() function should be called when an IP packet
-   should be sent out on the Ethernet. This function creates an
-   Ethernet header before the IP header in the uip_buf buffer. The
-   Ethernet header will have the correct Ethernet MAC destination
-   address filled in if an ARP table entry for the destination IP
-   address (or the IP address of the default router) is present. If no
-   such table entry is found, the IP packet is overwritten with an ARP
-   request and we rely on TCP to retransmit the packet that was
-   overwritten. In any case, the uip_len variable holds the length of
-   the Ethernet frame that should be transmitted. */
-void uip_arp_out(void);
-
-/* The uip_arp_timer() function should be called every ten seconds. It
-   is responsible for flushing old entries in the ARP table. */
-void uip_arp_timer(void);
-
-/** @} */
-
-/**
- * \addtogroup uipconffunc
- * @{
- */
-
-
-/**
- * Specifiy the Ethernet MAC address.
- *
- * The ARP code needs to know the MAC address of the Ethernet card in
- * order to be able to respond to ARP queries and to generate working
- * Ethernet headers.
- *
- * \note This macro only specifies the Ethernet MAC address to the ARP
- * code. It cannot be used to change the MAC address of the Ethernet
- * card.
- *
- * \param eaddr A pointer to a struct uip_eth_addr containing the
- * Ethernet MAC address of the Ethernet card.
- *
- * \hideinitializer
- */
-#define uip_setethaddr(eaddr) do {uip_ethaddr.addr[0] = eaddr.addr[0]; \
-                              uip_ethaddr.addr[1] = eaddr.addr[1];\
-                              uip_ethaddr.addr[2] = eaddr.addr[2];\
-                              uip_ethaddr.addr[3] = eaddr.addr[3];\
-                              uip_ethaddr.addr[4] = eaddr.addr[4];\
-                              uip_ethaddr.addr[5] = eaddr.addr[5];} while(0)
-
-/** @} */
-
-
-#endif /* __UIP_ARP_H__ */
-/** @} */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uipopt.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uipopt.h
deleted file mode 100644
index 520c03f25e..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uipopt.h
+++ /dev/null
@@ -1,740 +0,0 @@
-/**
- * \addtogroup uip
- * @{
- */
-
-/**
- * \defgroup uipopt Configuration options for uIP
- * @{
- *
- * uIP is configured using the per-project configuration file
- * "uipopt.h". This file contains all compile-time options for uIP and
- * should be tweaked to match each specific project. The uIP
- * distribution contains a documented example "uipopt.h" that can be
- * copied and modified for each project.
- */
-
-/**
- * \file
- * Configuration options for uIP.
- * \author Adam Dunkels <adam@dunkels.com>
- *
- * This file is used for tweaking various configuration options for
- * uIP. You should make a copy of this file into one of your project's
- * directories instead of editing this example "uipopt.h" file that
- * comes with the uIP distribution.
- */
-
-/*
- * Copyright (c) 2001-2003, Adam Dunkels.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- *    products derived from this software without specific prior
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * This file is part of the uIP TCP/IP stack.
- *
- * $Id: uipopt.h,v 1.11 2009/04/10 00:37:48 adamdunkels Exp $
- *
- */
-
-#ifndef __UIPOPT_H__
-#define __UIPOPT_H__
-
-#include "Config/AppConfig.h"
-
-#ifndef UIP_LITTLE_ENDIAN
-#define UIP_LITTLE_ENDIAN  3412
-#endif /* UIP_LITTLE_ENDIAN */
-#ifndef UIP_BIG_ENDIAN
-#define UIP_BIG_ENDIAN     1234
-#endif /* UIP_BIG_ENDIAN */
-
-/*------------------------------------------------------------------------------*/
-
-/**
- * \defgroup uipoptstaticconf Static configuration options
- * @{
- *
- * These configuration options can be used for setting the IP address
- * settings statically, but only if UIP_FIXEDADDR is set to 1. The
- * configuration options for a specific node includes IP address,
- * netmask and default router as well as the Ethernet address. The
- * netmask, default router and Ethernet address are applicable only
- * if uIP should be run over Ethernet.
- *
- * This options are meaningful only for the IPv4 code.
- *
- * All of these should be changed to suit your project.
- */
-
-/**
- * Determines if uIP should use a fixed IP address or not.
- *
- * If uIP should use a fixed IP address, the settings are set in the
- * uipopt.h file. If not, the macros uip_sethostaddr(),
- * uip_setdraddr() and uip_setnetmask() should be used instead.
- *
- * \hideinitializer
- */
-#define UIP_FIXEDADDR    0
-
-/**
- * Ping IP address assignment.
- *
- * uIP uses a "ping" packets for setting its own IP address if this
- * option is set. If so, uIP will start with an empty IP address and
- * the destination IP address of the first incoming "ping" (ICMP echo)
- * packet will be used for setting the hosts IP address.
- *
- * \note This works only if UIP_FIXEDADDR is 0.
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_PINGADDRCONF
-#define UIP_PINGADDRCONF UIP_CONF_PINGADDRCONF
-#else /* UIP_CONF_PINGADDRCONF */
-#define UIP_PINGADDRCONF 0
-#endif /* UIP_CONF_PINGADDRCONF */
-
-
-/**
- * Specifies if the uIP ARP module should be compiled with a fixed
- * Ethernet MAC address or not.
- *
- * If this configuration option is 0, the macro uip_setethaddr() can
- * be used to specify the Ethernet address at run-time.
- *
- * \hideinitializer
- */
-#define UIP_FIXEDETHADDR 0
-
-/** @} */
-/*------------------------------------------------------------------------------*/
-/**
- * \defgroup uipoptip IP configuration options
- * @{
- *
- */
-/**
- * The IP TTL (time to live) of IP packets sent by uIP.
- *
- * This should normally not be changed.
- */
-#define UIP_TTL         64
-
-/**
- * The maximum time an IP fragment should wait in the reassembly
- * buffer before it is dropped.
- *
- */
-#define UIP_REASS_MAXAGE 60 /*60s*/
-
-/**
- * Turn on support for IP packet reassembly.
- *
- * uIP supports reassembly of fragmented IP packets. This features
- * requires an additional amount of RAM to hold the reassembly buffer
- * and the reassembly code size is approximately 700 bytes.  The
- * reassembly buffer is of the same size as the uip_buf buffer
- * (configured by UIP_BUFSIZE).
- *
- * \note IP packet reassembly is not heavily tested.
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_REASSEMBLY
-#define UIP_REASSEMBLY UIP_CONF_REASSEMBLY
-#else /* UIP_CONF_REASSEMBLY */
-#define UIP_REASSEMBLY 0
-#endif /* UIP_CONF_REASSEMBLY */
-/** @} */
-
-/*------------------------------------------------------------------------------*/
-/**
- * \defgroup uipoptipv6 IPv6 configuration options
- * @{
- *
- */
-
-/** The maximum transmission unit at the IP Layer*/
-#define UIP_LINK_MTU 1280
-
-#ifndef UIP_CONF_IPV6
-/** Do we use IPv6 or not (default: no) */
-#define UIP_CONF_IPV6                 0
-#endif
-
-#ifndef UIP_CONF_IPV6_QUEUE_PKT
-/** Do we do per %neighbor queuing during address resolution (default: no) */
-#define UIP_CONF_IPV6_QUEUE_PKT       0
-#endif
-
-#ifndef UIP_CONF_IPV6_CHECKS
-/** Do we do IPv6 consistency checks (highly recommended, default: yes) */
-#define UIP_CONF_IPV6_CHECKS          1
-#endif
-
-#ifndef UIP_CONF_IPV6_REASSEMBLY
-/** Do we do IPv6 fragmentation (default: no) */
-#define UIP_CONF_IPV6_REASSEMBLY      0
-#endif
-
-#ifndef UIP_CONF_NETIF_MAX_ADDRESSES
-/** Default number of IPv6 addresses associated to the node's interface */
-#define UIP_CONF_NETIF_MAX_ADDRESSES  3
-#endif
-
-#ifndef UIP_CONF_ND6_MAX_PREFIXES
-/** Default number of IPv6 prefixes associated to the node's interface */
-#define UIP_CONF_ND6_MAX_PREFIXES     3
-#endif
-
-#ifndef UIP_CONF_ND6_MAX_NEIGHBORS
-/** Default number of neighbors that can be stored in the %neighbor cache */
-#define UIP_CONF_ND6_MAX_NEIGHBORS    4
-#endif
-
-#ifndef UIP_CONF_ND6_MAX_DEFROUTERS
-/** Minimum number of default routers */
-#define UIP_CONF_ND6_MAX_DEFROUTERS   2
-#endif
-/** @} */
-
-/*------------------------------------------------------------------------------*/
-/**
- * \defgroup uipoptudp UDP configuration options
- * @{
- *
- * \note The UDP support in uIP is still not entirely complete; there
- * is no support for sending or receiving broadcast or multicast
- * packets, but it works well enough to support a number of vital
- * applications such as DNS queries, though
- */
-
-/**
- * Toggles whether UDP support should be compiled in or not.
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_UDP
-#define UIP_UDP UIP_CONF_UDP
-#else /* UIP_CONF_UDP */
-#define UIP_UDP           1
-#endif /* UIP_CONF_UDP */
-
-/**
- * Toggles if UDP checksums should be used or not.
- *
- * \note Support for UDP checksums is currently not included in uIP,
- * so this option has no function.
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_UDP_CHECKSUMS
-#define UIP_UDP_CHECKSUMS UIP_CONF_UDP_CHECKSUMS
-#else
-#define UIP_UDP_CHECKSUMS 0
-#endif
-
-/**
- * The maximum amount of concurrent UDP connections.
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_UDP_CONNS
-#define UIP_UDP_CONNS UIP_CONF_UDP_CONNS
-#else /* UIP_CONF_UDP_CONNS */
-#define UIP_UDP_CONNS    10
-#endif /* UIP_CONF_UDP_CONNS */
-
-/**
- * The name of the function that should be called when UDP datagrams arrive.
- *
- * \hideinitializer
- */
-
-
-/** @} */
-/*------------------------------------------------------------------------------*/
-/**
- * \defgroup uipopttcp TCP configuration options
- * @{
- */
-
-/**
- * Toggles whether TCP support should be compiled in or not.
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_TCP
-#define UIP_TCP UIP_CONF_TCP
-#else /* UIP_CONF_TCP */
-#define UIP_TCP           1
-#endif /* UIP_CONF_TCP */
-
-/**
- * Determines if support for opening connections from uIP should be
- * compiled in.
- *
- * If the applications that are running on top of uIP for this project
- * do not need to open outgoing TCP connections, this configuration
- * option can be turned off to reduce the code size of uIP.
- *
- * \hideinitializer
- */
-#ifndef UIP_CONF_ACTIVE_OPEN
-#define UIP_ACTIVE_OPEN 1
-#else /* UIP_CONF_ACTIVE_OPEN */
-#define UIP_ACTIVE_OPEN UIP_CONF_ACTIVE_OPEN
-#endif /* UIP_CONF_ACTIVE_OPEN */
-
-/**
- * The maximum number of simultaneously open TCP connections.
- *
- * Since the TCP connections are statically allocated, turning this
- * configuration knob down results in less RAM used. Each TCP
- * connection requires approximately 30 bytes of memory.
- *
- * \hideinitializer
- */
-#ifndef UIP_CONF_MAX_CONNECTIONS
-#define UIP_CONNS       10
-#else /* UIP_CONF_MAX_CONNECTIONS */
-#define UIP_CONNS UIP_CONF_MAX_CONNECTIONS
-#endif /* UIP_CONF_MAX_CONNECTIONS */
-
-
-/**
- * The maximum number of simultaneously listening TCP ports.
- *
- * Each listening TCP port requires 2 bytes of memory.
- *
- * \hideinitializer
- */
-#ifndef UIP_CONF_MAX_LISTENPORTS
-#define UIP_LISTENPORTS 20
-#else /* UIP_CONF_MAX_LISTENPORTS */
-#define UIP_LISTENPORTS UIP_CONF_MAX_LISTENPORTS
-#endif /* UIP_CONF_MAX_LISTENPORTS */
-
-/**
- * Determines if support for TCP urgent data notification should be
- * compiled in.
- *
- * Urgent data (out-of-band data) is a rarely used TCP feature that
- * very seldom would be required.
- *
- * \hideinitializer
- */
-#if !defined(UIP_URGDATA)
-#define UIP_URGDATA      0
-#endif
-
-/**
- * The initial retransmission timeout counted in timer pulses.
- *
- * This should not be changed.
- */
-#if !defined(UIP_RTO)
-#define UIP_RTO         3
-#endif
-
-/**
- * The maximum number of times a segment should be retransmitted
- * before the connection should be aborted.
- *
- * This should not be changed.
- */
-#if !defined(UIP_MAXRTX)
-#define UIP_MAXRTX      8
-#endif
-
-/**
- * The maximum number of times a SYN segment should be retransmitted
- * before a connection request should be deemed to have been
- * unsuccessful.
- *
- * This should not need to be changed.
- */
-#if !defined(UIP_MAXSYNRTX)
-#define UIP_MAXSYNRTX      5
-#endif
-
-/**
- * The TCP maximum segment size.
- *
- * This is should not be to set to more than
- * UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN.
- */
-#ifdef UIP_CONF_TCP_MSS
-#define UIP_TCP_MSS UIP_CONF_TCP_MSS
-#else
-#define UIP_TCP_MSS     (UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN)
-#endif
-
-/**
- * The size of the advertised receiver's window.
- *
- * Should be set low (i.e., to the size of the uip_buf buffer) if the
- * application is slow to process incoming data, or high (32768 bytes)
- * if the application processes data quickly.
- *
- * \hideinitializer
- */
-#ifndef UIP_CONF_RECEIVE_WINDOW
-#define UIP_RECEIVE_WINDOW UIP_TCP_MSS
-#else
-#define UIP_RECEIVE_WINDOW UIP_CONF_RECEIVE_WINDOW
-#endif
-
-/**
- * How long a connection should stay in the TIME_WAIT state.
- *
- * This configuration option has no real implication, and it should be
- * left untouched.
- */
-#define UIP_TIME_WAIT_TIMEOUT 120
-
-
-/** @} */
-/*------------------------------------------------------------------------------*/
-/**
- * \defgroup uipoptarp ARP configuration options
- * @{
- */
-
-/**
- * The size of the ARP table.
- *
- * This option should be set to a larger value if this uIP node will
- * have many connections from the local network.
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_ARPTAB_SIZE
-#define UIP_ARPTAB_SIZE UIP_CONF_ARPTAB_SIZE
-#else
-#define UIP_ARPTAB_SIZE 8
-#endif
-
-/**
- * The maximum age of ARP table entries measured in 10ths of seconds.
- *
- * An UIP_ARP_MAXAGE of 120 corresponds to 20 minutes (BSD
- * default).
- */
-#define UIP_ARP_MAXAGE 120
-
-
-/** @} */
-
-/*------------------------------------------------------------------------------*/
-
-/**
- * \defgroup uipoptmac layer 2 options (for ipv6)
- * @{
- */
-
-#define UIP_DEFAULT_PREFIX_LEN 64
-
-/** @} */
-
-/*------------------------------------------------------------------------------*/
-
-/**
- * \defgroup uipoptsics 6lowpan options (for ipv6)
- * @{
- */
-/**
- * Timeout for packet reassembly at the 6lowpan layer
- * (should be < 60s)
- */
-#ifdef SICSLOWPAN_CONF_MAXAGE
-#define SICSLOWPAN_REASS_MAXAGE SICSLOWPAN_CONF_MAXAGE
-#else
-#define SICSLOWPAN_REASS_MAXAGE 20
-#endif
-
-/**
- * Do we compress the IP header or not (default: no)
- */
-#ifndef SICSLOWPAN_CONF_COMPRESSION
-#define SICSLOWPAN_CONF_COMPRESSION 0
-#endif
-
-/**
- * If we use IPHC compression, how many address contexts do we support
- */
-#ifndef SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS
-#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 1
-#endif
-
-/**
- * Do we support 6lowpan fragmentation
- */
-#ifndef SICSLOWPAN_CONF_FRAG
-#define SICSLOWPAN_CONF_FRAG  0
-#endif
-
-/** @} */
-
-/*------------------------------------------------------------------------------*/
-
-/**
- * \defgroup uipoptgeneral General configuration options
- * @{
- */
-
-/**
- * The size of the uIP packet buffer.
- *
- * The uIP packet buffer should not be smaller than 60 bytes, and does
- * not need to be larger than 1514 bytes. Lower size results in lower
- * TCP throughput, larger size results in higher TCP throughput.
- *
- * \hideinitializer
- */
-#ifndef UIP_CONF_BUFFER_SIZE
-#define UIP_BUFSIZE UIP_LINK_MTU + UIP_LLH_LEN
-#else /* UIP_CONF_BUFFER_SIZE */
-#define UIP_BUFSIZE UIP_CONF_BUFFER_SIZE
-#endif /* UIP_CONF_BUFFER_SIZE */
-
-
-/**
- * Determines if statistics support should be compiled in.
- *
- * The statistics is useful for debugging and to show the user.
- *
- * \hideinitializer
- */
-#ifndef UIP_CONF_STATISTICS
-#define UIP_STATISTICS  0
-#else /* UIP_CONF_STATISTICS */
-#define UIP_STATISTICS UIP_CONF_STATISTICS
-#endif /* UIP_CONF_STATISTICS */
-
-/**
- * Determines if logging of certain events should be compiled in.
- *
- * This is useful mostly for debugging. The function uip_log()
- * must be implemented to suit the architecture of the project, if
- * logging is turned on.
- *
- * \hideinitializer
- */
-#ifndef UIP_CONF_LOGGING
-#define UIP_LOGGING     0
-#else /* UIP_CONF_LOGGING */
-#define UIP_LOGGING     UIP_CONF_LOGGING
-#endif /* UIP_CONF_LOGGING */
-
-/**
- * Broadcast support.
- *
- * This flag configures IP broadcast support. This is useful only
- * together with UDP.
- *
- * \hideinitializer
- *
- */
-#ifndef UIP_CONF_BROADCAST
-#define UIP_BROADCAST 0
-#else /* UIP_CONF_BROADCAST */
-#define UIP_BROADCAST UIP_CONF_BROADCAST
-#endif /* UIP_CONF_BROADCAST */
-
-/**
- * Print out a uIP log message.
- *
- * This function must be implemented by the module that uses uIP, and
- * is called by uIP whenever a log message is generated.
- */
-void uip_log(char *msg);
-
-/**
- * The link level header length.
- *
- * This is the offset into the uip_buf where the IP header can be
- * found. For Ethernet, this should be set to 14. For SLIP, this
- * should be set to 0.
- *
- * \note we probably won't use this constant for other link layers than
- * ethernet as they have variable header length (this is due to variable
- * number and type of address fields and to optional security features)
- * E.g.: 802.15.4 -> 2 + (1/2*4/8) + 0/5/6/10/14
- *       802.11 -> 4 + (6*3/4) + 2
- * \hideinitializer
- */
-#ifdef UIP_CONF_LLH_LEN
-#define UIP_LLH_LEN UIP_CONF_LLH_LEN
-#else /* UIP_LLH_LEN */
-#define UIP_LLH_LEN     14
-#endif /* UIP_CONF_LLH_LEN */
-
-/** @} */
-/*------------------------------------------------------------------------------*/
-/**
- * \defgroup uipoptcpu CPU architecture configuration
- * @{
- *
- * The CPU architecture configuration is where the endianess of the
- * CPU on which uIP is to be run is specified. Most CPUs today are
- * little endian, and the most notable exception are the Motorolas
- * which are big endian. The BYTE_ORDER macro should be changed to
- * reflect the CPU architecture on which uIP is to be run.
- */
-
-/**
- * The byte order of the CPU architecture on which uIP is to be run.
- *
- * This option can be either UIP_BIG_ENDIAN (Motorola byte order) or
- * UIP_LITTLE_ENDIAN (Intel byte order).
- *
- * \hideinitializer
- */
-#ifdef UIP_CONF_BYTE_ORDER
-#define UIP_BYTE_ORDER     UIP_CONF_BYTE_ORDER
-#else /* UIP_CONF_BYTE_ORDER */
-#define UIP_BYTE_ORDER     UIP_LITTLE_ENDIAN
-#endif /* UIP_CONF_BYTE_ORDER */
-
-/** @} */
-/*------------------------------------------------------------------------------*/
-
-#include <ff.h>
-#include <stdbool.h>
-#include <stdint.h>
-
-#include "timer.h"
-
-typedef uint8_t u8_t;
-typedef uint16_t u16_t;
-typedef uint32_t u32_t;
-typedef uint32_t uip_stats_t;
-
-/**
- * \defgroup uipoptapp Application specific configurations
- * @{
- *
- * An uIP application is implemented using a single application
- * function that is called by uIP whenever a TCP/IP event occurs. The
- * name of this function must be registered with uIP at compile time
- * using the UIP_APPCALL definition.
- *
- * uIP applications can store the application state within the
- * uip_conn structure by specifying the type of the application
- * structure by typedef:ing the type uip_tcp_appstate_t and uip_udp_appstate_t.
- *
- * The file containing the definitions must be included in the
- * uipopt.h file.
- *
- * The following example illustrates how this can look.
- \code
-
- void httpd_appcall(void);
- #define UIP_APPCALL     httpd_appcall
-
- struct httpd_state {
- u8_t state;
- u16_t count;
- char *dataptr;
- char *script;
- };
- typedef struct httpd_state uip_tcp_appstate_t
- \endcode
-*/
-#define UIP_UDP_APPCALL uIPManagement_UDPCallback
-void UIP_UDP_APPCALL(void);
-
-/**
- * \var #define UIP_APPCALL
- *
- * The name of the application function that uIP should call in
- * response to TCP/IP events.
- *
- */
-#define UIP_APPCALL     uIPManagement_TCPCallback
-void UIP_APPCALL(void);
-
-/**
- * \var typedef uip_tcp_appstate_t
- *
- * The type of the application state that is to be stored in the
- * uip_conn structure. This usually is typedef:ed to a struct holding
- * application state information.
- */
-typedef union
-{
-	struct
-	{
-		uint8_t  CurrentState;
-		uint8_t  NextState;
-
-		char     FileName[MAX_URI_LENGTH];
-		FIL      FileHandle;
-		bool     FileOpen;
-		uint32_t ACKedFilePos;
-		uint16_t SentChunkSize;
-	} HTTPServer;
-
-	struct
-	{
-		uint8_t  CurrentState;
-		uint8_t  NextState;
-
-		uint8_t  IssuedCommand;
-	} TELNETServer;
-} uip_tcp_appstate_t;
-
-/**
- * \var typedef uip_udp_appstate_t
- *
- * The type of the application state that is to be stored in the
- * uip_conn structure. This usually is typedef:ed to a struct holding
- * application state information.
- */
-typedef union
-{
-	struct
-	{
-		uint8_t      CurrentState;
-		struct timer Timeout;
-
-		struct
-		{
-			uint8_t AllocatedIP[4];
-			uint8_t Netmask[4];
-			uint8_t GatewayIP[4];
-			uint8_t ServerIP[4];
-		} DHCPOffer_Data;
-	} DHCPClient;
-} uip_udp_appstate_t;
-/** @} */
-
-#endif /* __UIPOPT_H__ */
-/** @} */
-/** @} */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/USBDeviceMode.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/USBDeviceMode.c
deleted file mode 100644
index b2c6b39094..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/USBDeviceMode.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Mode management functions and variables. This file contains the LUFA code required to
- *  manage the USB Mass Storage device mode.
- */
-
-#include "USBDeviceMode.h"
-
-/** Message buffer for RNDIS messages processed by the RNDIS device class driver. */
-static uint8_t RNDIS_Message_Buffer[192];
-
-/** LUFA RNDIS Class driver interface configuration and state information. This structure is
- *  passed to all RNDIS Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface_Device =
-	{
-		.Config =
-			{
-				.ControlInterfaceNumber         = INTERFACE_ID_CDC_CCI,
-				.DataINEndpoint                 =
-					{
-						.Address                = CDC_TX_EPADDR,
-						.Size                   = CDC_TXRX_EPSIZE,
-						.Banks                  = 1,
-					},
-				.DataOUTEndpoint                =
-					{
-						.Address                = CDC_RX_EPADDR,
-						.Size                   = CDC_TXRX_EPSIZE,
-						.Banks                  = 1,
-					},
-				.NotificationEndpoint           =
-					{
-						.Address                = CDC_NOTIFICATION_EPADDR,
-						.Size                   = CDC_NOTIFICATION_EPSIZE,
-						.Banks                  = 1,
-					},
-				.AdapterVendorDescription       = "LUFA RNDIS Adapter",
-				.AdapterMACAddress              = {{0x02, 0x00, 0x02, 0x00, 0x02, 0x00}},
-				.MessageBuffer                  = RNDIS_Message_Buffer,
-				.MessageBufferLength            = sizeof(RNDIS_Message_Buffer),
-			},
-	};
-
-/** LUFA Mass Storage Class driver interface configuration and state information. This structure is
- *  passed to all Mass Storage Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_MS_Device_t Disk_MS_Interface =
-	{
-		.Config =
-			{
-				.InterfaceNumber                = INTERFACE_ID_MassStorage,
-				.DataINEndpoint                 =
-					{
-						.Address                = MASS_STORAGE_IN_EPADDR,
-						.Size                   = MASS_STORAGE_IO_EPSIZE,
-						.Banks                  = 1,
-					},
-				.DataOUTEndpoint                =
-					{
-						.Address                = MASS_STORAGE_OUT_EPADDR,
-						.Size                   = MASS_STORAGE_IO_EPSIZE,
-						.Banks                  = 1,
-					},
-				.TotalLUNs                 = 1,
-			},
-	};
-
-
-/** USB device mode management task. This function manages the Mass Storage Device class driver when the device is
- *  initialized in USB device mode.
- */
-void USBDeviceMode_USBTask(void)
-{
-	if (USB_CurrentMode != USB_MODE_Device)
-	  return;
-
-	uIPManagement_ManageNetwork();
-
-	RNDIS_Device_USBTask(&Ethernet_RNDIS_Interface_Device);
-	MS_Device_USBTask(&Disk_MS_Interface);
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uIPManagement_Init();
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	ConfigSuccess &= RNDIS_Device_ConfigureEndpoints(&Ethernet_RNDIS_Interface_Device);
-	ConfigSuccess &= MS_Device_ConfigureEndpoints(&Disk_MS_Interface);
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	RNDIS_Device_ProcessControlRequest(&Ethernet_RNDIS_Interface_Device);
-	MS_Device_ProcessControlRequest(&Disk_MS_Interface);
-}
-
-/** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed.
- *
- *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface configuration structure being referenced
- */
-bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
-	bool CommandSuccess;
-
-	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-	CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo);
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-
-	return CommandSuccess;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/USBDeviceMode.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/USBDeviceMode.h
deleted file mode 100644
index fe584e5644..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/USBDeviceMode.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for USBDeviceMode.c.
- */
-
-#ifndef _USBDEVICEMODE_H_
-#define _USBDEVICEMODE_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "Webserver.h"
-		#include "Descriptors.h"
-		#include "Lib/uIPManagement.h"
-		#include "Lib/SCSI.h"
-		#include "Config/AppConfig.h"
-
-	/* External Variables: */
-		extern USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface_Device;
-
-	/* Function Prototypes: */
-		void USBDeviceMode_USBTask(void);
-
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-
-		bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/USBHostMode.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/USBHostMode.c
deleted file mode 100644
index f4179e5ef0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/USBHostMode.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Host Mode management functions and variables. This file contains the LUFA code required to
- *  manage the USB RNDIS host mode.
- */
-
-#include "USBHostMode.h"
-
-/** LUFA RNDIS Class driver interface configuration and state information. This structure is
- *  passed to all RNDIS Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_RNDIS_Host_t Ethernet_RNDIS_Interface_Host =
-	{
-		.Config =
-			{
-				.DataINPipe             =
-					{
-						.Address        = (PIPE_DIR_IN  | 1),
-						.Banks          = 1,
-					},
-				.DataOUTPipe            =
-					{
-						.Address        = (PIPE_DIR_OUT | 2),
-						.Banks          = 1,
-					},
-				.NotificationPipe       =
-					{
-						.Address        = (PIPE_DIR_IN  | 3),
-						.Banks          = 1,
-					},
-				.HostMaxPacketSize      = UIP_CONF_BUFFER_SIZE,
-			},
-	};
-
-
-/** USB host mode management task. This function manages the RNDIS Host class driver and uIP stack when the device is
- *  initialized in USB host mode.
- */
-void USBHostMode_USBTask(void)
-{
-	if (USB_CurrentMode != USB_MODE_Host)
-	  return;
-
-	uIPManagement_ManageNetwork();
-
-	RNDIS_Host_USBTask(&Ethernet_RNDIS_Interface_Host);
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-	uint16_t ConfigDescriptorSize;
-	uint8_t  ConfigDescriptorData[512];
-
-	if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-	                                       sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (RNDIS_Host_ConfigurePipes(&Ethernet_RNDIS_Interface_Host,
-	                              ConfigDescriptorSize, ConfigDescriptorData) != RNDIS_ENUMERROR_NoError)
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		return;
-	}
-
-	if (RNDIS_Host_InitializeDevice(&Ethernet_RNDIS_Interface_Host) != HOST_SENDCONTROL_Successful)
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	uint32_t PacketFilter = (REMOTE_NDIS_PACKET_DIRECTED | REMOTE_NDIS_PACKET_BROADCAST);
-	if (RNDIS_Host_SetRNDISProperty(&Ethernet_RNDIS_Interface_Host, OID_GEN_CURRENT_PACKET_FILTER,
-	                                &PacketFilter, sizeof(PacketFilter)) != HOST_SENDCONTROL_Successful)
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	if (RNDIS_Host_QueryRNDISProperty(&Ethernet_RNDIS_Interface_Host, OID_802_3_CURRENT_ADDRESS,
-	                                  &MACAddress, sizeof(MACAddress)) != HOST_SENDCONTROL_Successful)
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-		USB_Host_SetDeviceConfiguration(0);
-		return;
-	}
-
-	/* Initialize uIP stack */
-	uIPManagement_Init();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_Disable();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/USBHostMode.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/USBHostMode.h
deleted file mode 100644
index be4eddbbbb..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/USBHostMode.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for USBHostMode.c.
- */
-
-#ifndef _USBHOSTMODE_H_
-#define _USBHOSTMODE_H_
-
-	/* Includes: */
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "Webserver.h"
-		#include "Lib/uIPManagement.h"
-		#include "Config/AppConfig.h"
-
-	/* External Variables: */
-		extern USB_ClassInfo_RNDIS_Host_t Ethernet_RNDIS_Interface_Host;
-
-	/* Function Prototypes: */
-		void USBHostMode_USBTask(void);
-
-		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-		void EVENT_USB_Host_DeviceAttached(void);
-		void EVENT_USB_Host_DeviceUnattached(void);
-		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
-		                                            const uint8_t SubErrorCode);
-		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Webserver.c b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Webserver.c
deleted file mode 100644
index caa372b943..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Webserver.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the Webserver project. This file contains the main tasks of
- *  the project and is responsible for the initial application hardware configuration.
- */
-
-#include "Webserver.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		if (USB_CurrentMode == USB_MODE_Host)
-		  USBHostMode_USBTask();
-		else
-		  USBDeviceMode_USBTask();
-
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Hardware Initialization */
-	Dataflash_Init();
-	LEDs_Init();
-	USB_Init(USB_MODE_UID);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Webserver.h b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Webserver.h
deleted file mode 100644
index 5879ff3ec1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Webserver.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for Webserver.c.
- */
-
-#ifndef _WEBSERVER_H_
-#define _WEBSERVER_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/pgmspace.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Board/Dataflash.h>
-		#include <LUFA/Drivers/Peripheral/SPI.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-		#include "USBDeviceMode.h"
-		#include "USBHostMode.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY          LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING      (LEDS_LED1 | LEDS_LED2)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY             LEDS_LED2
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR            (LEDS_LED1 | LEDS_LED3)
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_USB_BUSY             (LEDS_LED1 | LEDS_LED3 | LEDS_LED4)
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Webserver.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Webserver.txt
deleted file mode 100644
index 10aa716528..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/Webserver.txt
+++ /dev/null
@@ -1,126 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage uIP Powered Webserver Project
- *
- *  \section Sec_Compat Project Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this project.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Dual Mode Host/Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC) \n
- *        Mass Storage Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard) \n
- *        Bulk-Only Transport</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>Microsoft RNDIS Specification \n
- *        USBIF Mass Storage Standard \n
- *        USB Bulk-Only Transport Standard \n
- *        SCSI Primary Commands Specification \n
- *        SCSI Block Commands Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Simple HTTP webserver project. This project combines the LUFA library with the uIP TCP/IP full network stack and FatFS
- *  library to create a RNDIS host capable of serving out HTTP web pages to multiple hosts simultaneously. This project
- *  demonstrates how the libraries can be combined into a robust network enabled application, with the addition of a RNDIS
- *  network device.
- *
- *  To use this project, plug the USB AVR into a computer, so that it enumerates as a standard Mass Storage and RNDIS composite
- *  device. Load HTML files onto the disk, so that they can be served out to clients -- the default file to serve should be called
- *  <i>index.htm</i>. Filenames must be in 8.3 format for them to be retrieved correctly by the webserver, and the total
- *  requested file path must be equal to or less than the maximum URI length (\see \ref Sec_Options). Supply the included INF
- *  file when requested on Windows machines to enable the RNDIS interface, and allow the files to be viewed on a standard web-browser
- *  using the IP address 10.0.0.2.
- *
- *  When attached to a RNDIS class device, such as a USB (desktop) modem, the system will enumerate the device, set the
- *  appropriate parameters needed for connectivity and begin listening for new HTTP connections on port 80 and TELNET
- *  connections on port 23. The device IP, netmask and default gateway IP must be set to values appropriate for the RNDIS
- *  device being used for this project to work if the DHCP client is disabled (see \ref Sec_Options) - otherwise, the device
- *  will query the network's DHCP server for these parameters automatically.
- *
- *  When properly configured, the webserver can be accessed from any HTTP web browser by typing in the device's statically or
- *  dynamically allocated IP address. The TELNET client can be accessed via any network socket app by connecting to the device
- *  on port 23 on the device's statically or dynamically allocated IP address.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>ENABLE_TELNET_SERVER</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this enables the TELNET server in addition to the HTTP webserver, which listens for incoming connections
- *        and processes user commands.</td>
- *   </tr>
- *   <tr>
- *    <td>ENABLE_DHCP_CLIENT</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this enables the DHCP client for dynamic IP allocation of the network settings from a DHCP server.</td>
- *   </tr>
- *   <tr>
- *    <td>ENABLE_DHCP_SERVER</td>
- *    <td>AppConfig.h</td>
- *    <td>When defined, this enables the DHCP server for dynamic IP allocation of the network settings to a DHCP client.</td>
- *   </tr>
- *   <tr>
- *    <td>DEVICE_IP_ADDRESS</td>
- *    <td>AppConfig.h</td>
- *    <td>IP address that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).</td>
- *   </tr>
- *   <tr>
- *    <td>DEVICE_NETMASK</td>
- *    <td>AppConfig.h</td>
- *    <td>Netmask that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined).</td>
- *   </tr>
- *   <tr>
- *    <td>DEVICE_GATEWAY</td>
- *    <td>AppConfig.h</td>
- *    <td>Default routing gateway that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT
- *        is not defined).</td>
- *   </tr>
- *   <tr>
- *    <td>MAX_URI_LENGTH</td>
- *    <td>AppConfig.h</td>
- *    <td>Maximum length of a URI for the Webserver. This is the maximum file path, including subdirectories and separators.</td>
- *   </tr>
- *   <tr>
- *    <td>SERVER_MAC_ADDRESS</td>
- *    <td>AppConfig.h</td>
- *    <td>MAC address of the server used when sending Ethernet packets onto the bus.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/asf.xml
deleted file mode 100644
index ea6b4c66f0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/asf.xml
+++ /dev/null
@@ -1,96 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="RNDIS Webserver" id="lufa.projects.webserver.avr8">

-		<require idref="lufa.projects.webserver"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.projects.webserver" caption="RNDIS Webserver">

-		<info type="description" value="summary">

-		RNDIS Webserver project, using the open source uIP network stack.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Dual Role"/>

-			<keyword value="RNDIS Class"/>

-			<keyword value="Mass Storage Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="Webserver.txt"/>

-		<build type="distribute" subtype="user-file" value="LUFA Webserver RNDIS.inf"/>

-

-		<build type="c-source" value="Webserver.c"/>

-		<build type="c-source" value="USBDeviceMode.c"/>

-		<build type="c-source" value="USBHostMode.c"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Webserver.h"/>

-		<build type="header-file" value="USBDeviceMode.h"/>

-		<build type="header-file" value="USBHostMode.h"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="c-source" value="Lib/DataflashManager.c"/>

-		<build type="header-file" value="Lib/DataflashManager.h"/>

-		<build type="c-source" value="Lib/DHCPClientApp.c"/>

-		<build type="header-file" value="Lib/DHCPClientApp.h"/>

-		<build type="c-source" value="Lib/DHCPCommon.c"/>

-		<build type="header-file" value="Lib/DHCPCommon.h"/>

-		<build type="c-source" value="Lib/DHCPServerApp.c"/>

-		<build type="header-file" value="Lib/DHCPServerApp.h"/>

-		<build type="c-source" value="Lib/HTTPServerApp.c"/>

-		<build type="header-file" value="Lib/HTTPServerApp.h"/>

-		<build type="c-source" value="Lib/SCSI.c"/>

-		<build type="header-file" value="Lib/SCSI.h"/>

-		<build type="c-source" value="Lib/TELNETServerApp.c"/>

-		<build type="header-file" value="Lib/TELNETServerApp.h"/>

-		<build type="c-source" value="Lib/uIPManagement.c"/>

-		<build type="header-file" value="Lib/uIPManagement.h"/>

-

-		<build type="include-path" value="Lib/FATFs/"/>

-		<build type="c-source" value="Lib/FATFs/ff.c"/>

-		<build type="header-file" value="Lib/FATFs/ff.h"/>

-		<build type="c-source" value="Lib/FATFs/diskio.c"/>

-		<build type="header-file" value="Lib/FATFs/diskio.h"/>

-		<build type="header-file" value="Lib/FATFs/ffconf.h"/>

-		<build type="header-file" value="Lib/FATFs/integer.h"/>

-

-		<build type="include-path" value="Lib/uip/"/>

-		<build type="c-source" value="Lib/uip/clock.c"/>

-		<build type="header-file" value="Lib/uip/clock.h"/>

-		<build type="c-source" value="Lib/uip/timer.c"/>

-		<build type="header-file" value="Lib/uip/timer.h"/>

-		<build type="c-source" value="Lib/uip/uip.c"/>

-		<build type="header-file" value="Lib/uip/uip.h"/>

-		<build type="c-source" value="Lib/uip/uip_arp.c"/>

-		<build type="header-file" value="Lib/uip/uip_arp.h"/>

-		<build type="c-source" value="Lib/uip/uip-split.c"/>

-		<build type="header-file" value="Lib/uip/uip-split.h"/>

-		<build type="header-file" value="Lib/uip/uipopt.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-		<require idref="lufa.drivers.board.dataflash"/>

-		<require idref="lufa.drivers.peripheral.spi"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/doxyfile
deleted file mode 100644
index 419cf11fd0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/doxyfile
+++ /dev/null
@@ -1,2365 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - uIP Powered Webserver Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       = */uip/* \
-                         */FATFs/*
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/makefile
deleted file mode 100644
index 2a7bb37a47..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/Webserver/makefile
+++ /dev/null
@@ -1,41 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = USBKEY
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = Webserver
-SRC          = $(TARGET).c Descriptors.c USBDeviceMode.c USBHostMode.c Lib/SCSI.c Lib/DataflashManager.c \
-               Lib/uIPManagement.c Lib/DHCPCommon.c Lib/DHCPClientApp.c Lib/DHCPServerApp.c Lib/HTTPServerApp.c \
-               Lib/TELNETServerApp.c Lib/uip/uip.c Lib/uip/uip_arp.c Lib/uip/timer.c Lib/uip/clock.c \
-               Lib/uip/uip-split.c Lib/FATFs/diskio.c Lib/FATFs/ff.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -ILib/uip/ -ILib/FATFs/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/Config/AppConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/Config/AppConfig.h
deleted file mode 100644
index 7163fc9c03..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/Config/AppConfig.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief Application Configuration Header File
- *
- *  This is a header file which is be used to configure some of
- *  the application's compile time options, as an alternative to
- *  specifying the compile time constants supplied through a
- *  makefile or build system.
- *
- *  For information on what each token does, refer to the
- *  \ref Sec_Options section of the application documentation.
- */
-
-#ifndef _APP_CONFIG_H_
-#define _APP_CONFIG_H_
-
-	#define AUX_LINE_PORT              PORTB
-	#define AUX_LINE_PIN               PINB
-	#define AUX_LINE_DDR               DDRB
-	#define AUX_LINE_MASK              (1 << 4)
-
-//	#define ENABLE_ISP_PROTOCOL
-	#define ENABLE_XPROG_PROTOCOL
-
-	#define VTARGET_ADC_CHANNEL        2
-	#define VTARGET_REF_VOLTS          3.3
-	#define VTARGET_SCALE_FACTOR       2
-//	#define VTARGET_USE_INTERNAL_REF
-//	#define NO_VTARGET_DETECT
-//	#define XCK_RESCUE_CLOCK_ENABLE
-//	#define INVERTED_ISP_MISO
-
-//	#define LIBUSB_DRIVER_COMPAT
-//	#define RESET_TOGGLES_LIBUSB_COMPAT
-//	#define FIRMWARE_VERSION_MINOR     0x11
-
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/Config/LUFAConfig.h b/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/Config/LUFAConfig.h
deleted file mode 100644
index ec38aa6476..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/Config/LUFAConfig.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief LUFA Library Configuration Header File
- *
- *  This header file is used to configure LUFA's compile time options,
- *  as an alternative to the compile time constants supplied through
- *  a makefile.
- *
- *  For information on what each token does, refer to the LUFA
- *  manual section "Summary of Compile Tokens".
- */
-
-#ifndef _LUFA_CONFIG_H_
-#define _LUFA_CONFIG_H_
-
-	#if (ARCH == ARCH_AVR8)
-
-		/* Non-USB Related Configuration Tokens: */
-//		#define DISABLE_TERMINAL_CODES
-
-		/* USB Class Driver Related Tokens: */
-//		#define HID_HOST_BOOT_PROTOCOL_ONLY
-//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
-//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
-//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
-//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
-//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
-//		#define NO_CLASS_DRIVER_AUTOFLUSH
-
-		/* General USB Driver Related Tokens: */
-		#define ORDERED_EP_CONFIG
-		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
-		#define USB_DEVICE_ONLY
-//		#define USB_HOST_ONLY
-//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
-//		#define NO_LIMITED_CONTROLLER_CONNECT
-		#define NO_SOF_EVENTS
-
-		/* USB Device Mode Driver Related Tokens: */
-//		#define USE_RAM_DESCRIPTORS
-//		#define USE_FLASH_DESCRIPTORS
-//		#define USE_EEPROM_DESCRIPTORS
-//		#define NO_INTERNAL_SERIAL
-		#define FIXED_CONTROL_ENDPOINT_SIZE      16
-		#define DEVICE_STATE_AS_GPIOR            0
-		#define FIXED_NUM_CONFIGURATIONS         1
-//		#define CONTROL_ONLY_DEVICE
-//		#define INTERRUPT_CONTROL_ENDPOINT
-		#define NO_DEVICE_REMOTE_WAKEUP
-		#define NO_DEVICE_SELF_POWER
-
-		/* USB Host Mode Driver Related Tokens: */
-//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
-//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
-//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
-//		#define NO_AUTO_VBUS_MANAGEMENT
-//		#define INVERTED_VBUS_ENABLE_LINE
-
-	#else
-
-		#error Unsupported architecture for this LUFA configuration file.
-
-	#endif
-#endif
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/LUFA XPLAIN Bridge.inf b/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/LUFA XPLAIN Bridge.inf
deleted file mode 100644
index 45840e8bf0..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/LUFA XPLAIN Bridge.inf
+++ /dev/null
@@ -1,66 +0,0 @@
-;************************************************************
-; Windows USB CDC ACM Setup File
-; Copyright (c) 2000 Microsoft Corporation
-;************************************************************
-
-[DefaultInstall]
-CopyINF="LUFA XPLAIN Bridge.inf"
-
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%MFGNAME%
-DriverVer=7/1/2012,10.0.0.0
-
-[Manufacturer]
-%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
-
-[SourceDisksNames]
-
-[SourceDisksFiles]
-
-[DestinationDirs]
-DefaultDestDir=12
-
-[DriverInstall]
-Include=mdmcpq.inf
-CopyFiles=FakeModemCopyFileSection
-AddReg=DriverInstall.AddReg
-
-[DriverInstall.Services]
-Include=mdmcpq.inf
-AddService=usbser, 0x00000002, LowerFilter_Service_Inst
-
-[DriverInstall.AddReg]
-HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
-
-;------------------------------------------------------------------------------
-;  Vendor and Product ID Definitions
-;------------------------------------------------------------------------------
-; When developing your USB device, the VID and PID used in the PC side
-; application program and the firmware on the microcontroller must match.
-; Modify the below line to use your VID and PID.  Use the format as shown below.
-; Note: One INF file can be used for multiple devices with different VID and PIDs.
-; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
-;------------------------------------------------------------------------------
-[DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204B
-
-[DeviceList.NTx86]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204B
-
-[DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204B
-
-[DeviceList.NTia64]
-%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204B
-
-;------------------------------------------------------------------------------
-;  String Definitions
-;------------------------------------------------------------------------------
-;Modify these strings to customize your device
-;------------------------------------------------------------------------------
-[Strings]
-MFGNAME="http://www.lufa-lib.org"
-DESCRIPTION="LUFA XPLAIN Bridge"
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/Lib/SoftUART.c b/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/Lib/SoftUART.c
deleted file mode 100644
index 0290ca2045..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/Lib/SoftUART.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2010  David Prentice (david.prentice [at] farming [dot] uk)
-  Copyright 2010  Peter Danneger
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Software UART for both data transmission and reception. This
- *  code continuously monitors the ring buffers set up by the main
- *  project source file and reads/writes data as it becomes available.
- */
-
-#include "SoftUART.h"
-
-/** Total number of bits remaining to be sent in the current frame */
-static uint8_t TX_BitsRemaining;
-
-/** Temporary data variable to hold the byte being transmitted as it is shifted out */
-static uint8_t TX_Data;
-
-/** Total number of bits remaining to be received in the current frame */
-static uint8_t RX_BitsRemaining;
-
-/** Temporary data variable to hold the byte being received as it is shifted in */
-static uint8_t RX_Data;
-
-
-/** Initializes the software UART, ready for data transmission and reception into the global ring buffers. */
-void SoftUART_Init(void)
-{
-	/* Set TX pin to output high, enable RX pull-up */
-	STXPORT |= (1 << STX);
-	STXDDR  |= (1 << STX);
-	SRXPORT |= (1 << SRX);
-
-	/* Enable INT0 for the detection of incoming start bits that signal the start of a byte */
-	EICRA  = (1 << ISC01);
-	EIMSK  = (1 << INT0);
-
-	/* Set the transmission and reception timer compare values for the default baud rate */
-	SoftUART_SetBaud(9600);
-
-	/* Setup reception timer compare ISR */
-	TIMSK1 = (1 << OCIE1A);
-
-	/* Setup transmission timer compare ISR and start the timer */
-	TIMSK3 = (1 << OCIE3A);
-	TCCR3B = ((1 << CS30) | (1 << WGM32));
-}
-
-/** ISR to detect the start of a bit being sent to the software UART. */
-ISR(INT0_vect, ISR_BLOCK)
-{
-	/* Reset the number of reception bits remaining counter */
-	RX_BitsRemaining = 8;
-
-	/* Reset the bit reception timer to -(1/2) of the total bit time, so that the first data bit is
-	 * sampled mid way through the total bit time, making reception more robust.
-	 */
-	TCNT1 = -(OCR1A >> 1);
-
-	/* Check to see that the pin is still low (prevents glitches from starting a frame reception) */
-	if (!(SRXPIN & (1 << SRX)))
-	{
-		/* Disable start bit detection ISR while the next byte is received */
-		EIMSK = 0;
-
-		/* Start the reception timer */
-		TCCR1B = ((1 << CS10) | (1 << WGM12));
-	}
-}
-
-/** ISR to manage the reception of bits to the software UART. */
-ISR(TIMER1_COMPA_vect, ISR_BLOCK)
-{
-	/* Cache the current RX pin value for later checking */
-	uint8_t SRX_Cached = (SRXPIN & (1 << SRX));
-
-	/* Check if reception has finished */
-	if (RX_BitsRemaining)
-	{
-		/* Shift the current received bit mask to the next bit position */
-		RX_Data >>= 1;
-		RX_BitsRemaining--;
-
-		/* Store next bit into the received data variable */
-		if (SRX_Cached)
-		  RX_Data |= (1 << 7);
-	}
-	else
-	{
-		/* Disable the reception timer as all data has now been received, re-enable start bit detection ISR */
-		TCCR1B = 0;
-		EIFR   = (1 << INTF0);
-		EIMSK  = (1 << INT0);
-
-		/* Reception complete, store the received byte if stop bit valid */
-		if (SRX_Cached)
-		  RingBuffer_Insert(&UARTtoUSB_Buffer, RX_Data);
-	}
-}
-
-/** ISR to manage the transmission of bits via the software UART. */
-ISR(TIMER3_COMPA_vect, ISR_BLOCK)
-{
-	/* Check if transmission has finished */
-	if (TX_BitsRemaining)
-	{
-		/* Set the TX line to the value of the next bit in the byte to send */
-		if (TX_Data & (1 << 0))
-		  STXPORT &= ~(1 << STX);
-		else
-		  STXPORT |=  (1 << STX);
-
-		/* Shift the transmission byte to move the next bit into position and decrement the bits remaining counter */
-		TX_Data >>= 1;
-		TX_BitsRemaining--;
-	}
-	else if (!(RX_BitsRemaining) && !(RingBuffer_IsEmpty(&USBtoUART_Buffer)))
-	{
-		/* Start bit - TX line low */
-		STXPORT &= ~(1 << STX);
-
-		/* Transmission complete, get the next byte to send (if available) */
-		TX_Data          = ~RingBuffer_Remove(&USBtoUART_Buffer);
-		TX_BitsRemaining = 9;
-	}
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/Lib/SoftUART.h b/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/Lib/SoftUART.h
deleted file mode 100644
index 59a2d9c29c..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/Lib/SoftUART.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2010  David Prentice (david.prentice [at] farming [dot] uk)
-  Copyright 2010  Peter Danneger
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for SoftUART.c.
- */
-
-#ifndef _SOFT_UART_
-#define _SOFT_UART_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-
-		#include "../XPLAINBridge.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		#define SRX        PD0
-		#define SRXPIN     PIND
-		#define SRXPORT    PORTD
-
-		#define STX        PD1
-		#define STXPORT    PORTD
-		#define STXDDR     DDRD
-
-	/* Inline Functions: */
-		static inline void SoftUART_SetBaud(const uint32_t Baud)
-		{
-			uint16_t BitTime = ((F_CPU / Baud) - 1);
-
-			OCR1A = BitTime;
-			OCR3A = BitTime;
-		}
-
-	/* Function Prototypes: */
-		void SoftUART_Init(void);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/USARTDescriptors.c b/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/USARTDescriptors.c
deleted file mode 100644
index 439a5f58ea..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/USARTDescriptors.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
- *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.
- */
-
-#include "USARTDescriptors.h"
-
-
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
- *  device characteristics, including the supported USB version, control endpoint size and the
- *  number of device configurations. The descriptor is read out by the USB host when the enumeration
- *  process begins.
- */
-const USB_Descriptor_Device_t PROGMEM USART_DeviceDescriptor =
-{
-	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-
-	.USBSpecification       = VERSION_BCD(1,1,0),
-	.Class                  = CDC_CSCP_CDCClass,
-	.SubClass               = CDC_CSCP_NoSpecificSubclass,
-	.Protocol               = CDC_CSCP_NoSpecificProtocol,
-
-	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-
-	.VendorID               = 0x03EB,
-	.ProductID              = 0x204B,
-	.ReleaseNumber          = VERSION_BCD(0,0,1),
-
-	.ManufacturerStrIndex   = USART_STRING_ID_Manufacturer,
-	.ProductStrIndex        = USART_STRING_ID_Product,
-	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-
-	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
-};
-
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
- *  of the device in one of its supported configurations, including information about any device interfaces
- *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
- *  a configuration so that the host may correctly communicate with the USB device.
- */
-const USART_USB_Descriptor_Configuration_t PROGMEM USART_ConfigurationDescriptor =
-{
-	.Config =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
-
-			.TotalConfigurationSize = sizeof(USART_USB_Descriptor_Configuration_t),
-			.TotalInterfaces        = 2,
-
-			.ConfigurationNumber    = 1,
-			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-
-			.ConfigAttributes       = USB_CONFIG_ATTR_RESERVED,
-
-			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
-		},
-
-	.CDC_CCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_CCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 1,
-
-			.Class                  = CDC_CSCP_CDCClass,
-			.SubClass               = CDC_CSCP_ACMSubclass,
-			.Protocol               = CDC_CSCP_ATCommandProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_Functional_Header =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-
-			.CDCSpecification       = VERSION_BCD(1,1,0),
-		},
-
-	.CDC_Functional_ACM =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-
-			.Capabilities           = 0x06,
-		},
-
-	.CDC_Functional_Union =
-		{
-			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
-			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-
-			.MasterInterfaceNumber  = INTERFACE_ID_CDC_CCI,
-			.SlaveInterfaceNumber   = INTERFACE_ID_CDC_DCI,
-		},
-
-	.CDC_NotificationEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_NOTIFICATION_EPADDR,
-			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
-			.PollingIntervalMS      = 0xFF
-		},
-
-	.CDC_DCI_Interface =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
-
-			.InterfaceNumber        = INTERFACE_ID_CDC_DCI,
-			.AlternateSetting       = 0,
-
-			.TotalEndpoints         = 2,
-
-			.Class                  = CDC_CSCP_CDCDataClass,
-			.SubClass               = CDC_CSCP_NoDataSubclass,
-			.Protocol               = CDC_CSCP_NoDataProtocol,
-
-			.InterfaceStrIndex      = NO_DESCRIPTOR
-		},
-
-	.CDC_DataOutEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_RX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		},
-
-	.CDC_DataInEndpoint =
-		{
-			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-
-			.EndpointAddress        = CDC_TX_EPADDR,
-			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CDC_TXRX_EPSIZE,
-			.PollingIntervalMS      = 0x05
-		}
-};
-
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
- *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
- *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
- */
-const USB_Descriptor_String_t PROGMEM USART_LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
-
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
- *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM USART_ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
-
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
- *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
- *  Descriptor.
- */
-const USB_Descriptor_String_t PROGMEM USART_ProductString = USB_STRING_DESCRIPTOR(L"LUFA XPLAIN Bridge");
-
-/** Descriptor retrieval function for the USART Bridge descriptors. This function is in turn called by the GetDescriptor
- *  callback function in the main source file, to retrieve the device's descriptors when in USART bridge mode.
- */
-uint16_t USART_GetDescriptor(const uint16_t wValue,
-                             const uint8_t wIndex,
-                             const void** const DescriptorAddress,
-                             uint8_t* const DescriptorMemorySpace)
-{
-	const uint8_t  DescriptorType   = (wValue >> 8);
-	const uint8_t  DescriptorNumber = (wValue & 0xFF);
-
-	const void* Address = NULL;
-	uint16_t    Size    = NO_DESCRIPTOR;
-
-	*DescriptorMemorySpace = MEMSPACE_FLASH;
-
-	switch (DescriptorType)
-	{
-		case DTYPE_Device:
-			Address = &USART_DeviceDescriptor;
-			Size    = sizeof(USB_Descriptor_Device_t);
-			break;
-		case DTYPE_Configuration:
-			Address = &USART_ConfigurationDescriptor;
-			Size    = sizeof(USART_USB_Descriptor_Configuration_t);
-			break;
-		case DTYPE_String:
-			switch (DescriptorNumber)
-			{
-				case USART_STRING_ID_Language:
-					Address = &USART_LanguageString;
-					Size    = pgm_read_byte(&USART_LanguageString.Header.Size);
-					break;
-				case USART_STRING_ID_Manufacturer:
-					Address = &USART_ManufacturerString;
-					Size    = pgm_read_byte(&USART_ManufacturerString.Header.Size);
-					break;
-				case USART_STRING_ID_Product:
-					Address = &USART_ProductString;
-					Size    = pgm_read_byte(&USART_ProductString.Header.Size);
-					break;
-			}
-
-			break;
-	}
-
-	*DescriptorAddress = Address;
-	return Size;
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/USARTDescriptors.h b/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/USARTDescriptors.h
deleted file mode 100644
index c77931cf91..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/USARTDescriptors.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for USARTDescriptors.c.
- */
-
-#ifndef _USART_DESCRIPTORS_H_
-#define _USART_DESCRIPTORS_H_
-
-	/* Includes: */
-		#include <avr/pgmspace.h>
-
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		/** Endpoint address of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPADDR        (ENDPOINT_DIR_IN  | 2)
-
-		/** Endpoint address of the CDC device-to-host data IN endpoint. */
-		#define CDC_TX_EPADDR                  (ENDPOINT_DIR_IN  | 3)
-
-		/** Endpoint address of the CDC host-to-device data OUT endpoint. */
-		#define CDC_RX_EPADDR                  (ENDPOINT_DIR_OUT | 4)
-
-		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
-		#define CDC_NOTIFICATION_EPSIZE        8
-
-		/** Size in bytes of the CDC data IN and OUT endpoints. */
-		#define CDC_TXRX_EPSIZE                16
-
-	/* Type Defines: */
-		/** Type define for the device configuration descriptor structure. This must be defined in the
-		 *  application code, as the configuration descriptor contains several sub-descriptors which
-		 *  vary between devices, and which describe the device's usage to the host.
-		 */
-		typedef struct
-		{
-			USB_Descriptor_Configuration_Header_t    Config;
-
-			// CDC Control Interface
-			USB_Descriptor_Interface_t               CDC_CCI_Interface;
-			USB_CDC_Descriptor_FunctionalHeader_t    CDC_Functional_Header;
-			USB_CDC_Descriptor_FunctionalACM_t       CDC_Functional_ACM;
-			USB_CDC_Descriptor_FunctionalUnion_t     CDC_Functional_Union;
-			USB_Descriptor_Endpoint_t                CDC_NotificationEndpoint;
-
-			// CDC Data Interface
-			USB_Descriptor_Interface_t               CDC_DCI_Interface;
-			USB_Descriptor_Endpoint_t                CDC_DataOutEndpoint;
-			USB_Descriptor_Endpoint_t                CDC_DataInEndpoint;
-		} USART_USB_Descriptor_Configuration_t;
-
-		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
-		 *  should have a unique ID index associated with it, which can be used to refer to the
-		 *  interface from other descriptors.
-		 */
-		enum USART_InterfaceDescriptors_t
-		{
-			INTERFACE_ID_CDC_CCI = 0, /**< CDC CCI interface descriptor ID */
-			INTERFACE_ID_CDC_DCI = 1, /**< CDC DCI interface descriptor ID */
-		};
-
-		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
-		 *  have a unique ID index associated with it, which can be used to refer to the string from
-		 *  other descriptors.
-		 */
-		enum USART_StringDescriptors_t
-		{
-			USART_STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
-			USART_STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
-			USART_STRING_ID_Product      = 2, /**< Product string ID */
-		};
-
-	/* Function Prototypes: */
-		uint16_t USART_GetDescriptor(const uint16_t wValue,
-		                             const uint8_t wIndex,
-		                             const void** const DescriptorAddress,
-		                             uint8_t* const DescriptorMemorySpace);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/XPLAINBridge.c b/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/XPLAINBridge.c
deleted file mode 100644
index 7c24c973ea..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/XPLAINBridge.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the XPLAINBridge project. This file contains the main tasks of
- *  the project and is responsible for the initial application hardware configuration.
- */
-
-#include "XPLAINBridge.h"
-
-/** Current firmware mode, making the device behave as either a programmer or a USART bridge */
-bool CurrentFirmwareMode = MODE_USART_BRIDGE;
-
-/** LUFA CDC Class driver interface configuration and state information. This structure is
- *  passed to all CDC Class driver functions, so that multiple instances of the same class
- *  within a device can be differentiated from one another.
- */
-USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
-	{
-		.Config =
-			{
-				.ControlInterfaceNumber         = INTERFACE_ID_CDC_CCI,
-				.DataINEndpoint                 =
-					{
-						.Address                = CDC_TX_EPADDR,
-						.Size                   = CDC_TXRX_EPSIZE,
-						.Banks                  = 1,
-					},
-				.DataOUTEndpoint                =
-					{
-						.Address                = CDC_RX_EPADDR,
-						.Size                   = CDC_TXRX_EPSIZE,
-						.Banks                  = 1,
-					},
-				.NotificationEndpoint           =
-					{
-						.Address                = CDC_NOTIFICATION_EPADDR,
-						.Size                   = CDC_NOTIFICATION_EPSIZE,
-						.Banks                  = 1,
-					},
-			},
-	};
-
-/** Circular buffer to hold data from the host before it is sent to the device via the serial port. */
-RingBuffer_t   USBtoUART_Buffer;
-
-/** Underlying data buffer for \ref USBtoUART_Buffer, where the stored bytes are located. */
-static uint8_t USBtoUART_Buffer_Data[128];
-
-/** Circular buffer to hold data from the serial port before it is sent to the host. */
-RingBuffer_t   UARTtoUSB_Buffer;
-
-/** Underlying data buffer for \ref UARTtoUSB_Buffer, where the stored bytes are located. */
-static uint8_t UARTtoUSB_Buffer_Data[128];
-
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-
-	for (;;)
-	{
-		if (CurrentFirmwareMode == MODE_USART_BRIDGE)
-		  UARTBridge_Task();
-		else
-		  AVRISP_Task();
-
-		USB_USBTask();
-	}
-}
-
-void AVRISP_Task(void)
-{
-	/* Must be in the configured state for the AVRISP code to process data */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	V2Params_UpdateParamValues();
-
-	Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPADDR);
-
-	/* Check to see if a V2 Protocol command has been received */
-	if (Endpoint_IsOUTReceived())
-	{
-		LEDs_SetAllLEDs(LEDMASK_BUSY);
-
-		/* Pass off processing of the V2 Protocol command to the V2 Protocol handler */
-		V2Protocol_ProcessCommand();
-
-		LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	}
-}
-
-void UARTBridge_Task(void)
-{
-	/* Must be in the configured state for the USART Bridge code to process data */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	/* Only try to read in bytes from the CDC interface if the transmit buffer is not full */
-	if (!(RingBuffer_IsFull(&USBtoUART_Buffer)))
-	{
-		int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
-
-		/* Read bytes from the USB OUT endpoint into the UART transmit buffer */
-		if (!(ReceivedByte < 0))
-		  RingBuffer_Insert(&USBtoUART_Buffer, ReceivedByte);
-	}
-
-	/* Check if the UART receive buffer flush timer has expired or buffer is nearly full */
-	uint16_t BufferCount = RingBuffer_GetCount(&UARTtoUSB_Buffer);
-	if ((TIFR0 & (1 << TOV0)) || (BufferCount > 200))
-	{
-		/* Clear flush timer expiry flag */
-		TIFR0 |= (1 << TOV0);
-
-		/* Read bytes from the USART receive buffer into the USB IN endpoint */
-		while (BufferCount--)
-		{
-			/* Try to send the next byte of data to the host, abort if there is an error without dequeuing */
-			if (CDC_Device_SendByte(&VirtualSerial_CDC_Interface,
-									RingBuffer_Peek(&UARTtoUSB_Buffer)) != ENDPOINT_READYWAIT_NoError)
-			{
-				break;
-			}
-
-			/* Dequeue the already sent byte from the buffer now we have confirmed that no transmission error occurred */
-			RingBuffer_Remove(&UARTtoUSB_Buffer);
-		}
-	}
-
-	CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-#if (ARCH == ARCH_AVR8)
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-#endif
-
-	/* Disable JTAG debugging */
-	MCUCR |= (1 << JTD);
-	MCUCR |= (1 << JTD);
-
-	/* Enable pull-up on the JTAG TDI pin so we can use it to select the mode */
-	PORTF |= (1 << 7);
-	Delay_MS(10);
-
-	/* Select the firmware mode based on the JTD pin's value */
-	CurrentFirmwareMode = (PINF & (1 << 7)) ? MODE_USART_BRIDGE : MODE_PDI_PROGRAMMER;
-
-	/* Re-enable JTAG debugging */
-	MCUCR &= ~(1 << JTD);
-	MCUCR &= ~(1 << JTD);
-
-	/* Hardware Initialization */
-	SoftUART_Init();
-	LEDs_Init();
-	#if defined(RESET_TOGGLES_LIBUSB_COMPAT)
-	UpdateCurrentCompatibilityMode();
-	#endif
-
-	/* USB Stack Initialization */
-	USB_Init();
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	bool ConfigSuccess = true;
-
-	/* Configure the device endpoints according to the selected mode */
-	if (CurrentFirmwareMode == MODE_USART_BRIDGE)
-	{
-		ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
-
-		/* Configure the UART flush timer - run at Fcpu/1024 for maximum interval before overflow */
-		TCCR0B = ((1 << CS02) | (1 << CS00));
-
-		/* Initialize ring buffers used to hold serial data between USB and software UART interfaces */
-		RingBuffer_InitBuffer(&USBtoUART_Buffer, USBtoUART_Buffer_Data, sizeof(USBtoUART_Buffer_Data));
-		RingBuffer_InitBuffer(&UARTtoUSB_Buffer, UARTtoUSB_Buffer_Data, sizeof(UARTtoUSB_Buffer_Data));
-
-		/* Start the software USART */
-		SoftUART_Init();
-	}
-	else
-	{
-		ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1);
-
-		if ((AVRISP_DATA_IN_EPADDR & ENDPOINT_EPNUM_MASK) != (AVRISP_DATA_OUT_EPADDR & ENDPOINT_EPNUM_MASK))
-		  ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1);
-
-		/* Configure the V2 protocol packet handler */
-		V2Protocol_Init();
-	}
-
-	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
-}
-
-/** Event handler for the library USB Control Request reception event. */
-void EVENT_USB_Device_ControlRequest(void)
-{
-	if (CurrentFirmwareMode == MODE_USART_BRIDGE)
-	  CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the CDC Class driver Line Encoding Changed event.
- *
- *  \param[in] CDCInterfaceInfo  Pointer to the CDC class interface configuration structure being referenced
- */
-void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
-{
-	/* Change the software UART's baud rate to match the new baud rate */
-	SoftUART_SetBaud(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
-}
-
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
- *  documentation) by the application code so that the address and size of a requested descriptor can be given
- *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
- *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
- *  USB host.
- *
- *  \param[in]  wValue                 Descriptor type and index to retrieve
- *  \param[in]  wIndex                 Sub-index to retrieve (such as a localized string language)
- *  \param[out] DescriptorAddress      Address of the retrieved descriptor
- *  \param[out] DescriptorMemorySpace  Memory space that the descriptor is stored in
- *
- *  \return Length of the retrieved descriptor in bytes, or NO_DESCRIPTOR if the descriptor was not found
- */
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
-                                    const void** const DescriptorAddress,
-		                            uint8_t* const DescriptorMemorySpace)
-{
-	/* Return the correct descriptors based on the selected mode */
-	if (CurrentFirmwareMode == MODE_USART_BRIDGE)
-	  return USART_GetDescriptor(wValue, wIndex, DescriptorAddress, DescriptorMemorySpace);
-	else
-	  return AVRISP_GetDescriptor(wValue, wIndex, DescriptorAddress, DescriptorMemorySpace);
-}
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/XPLAINBridge.h b/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/XPLAINBridge.h
deleted file mode 100644
index 73da4d2ff1..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/XPLAINBridge.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2014.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for XPLAINBridge.c.
- */
-
-#ifndef _XPLAIN_BRIDGE_H_
-#define _XPLAIN_BRIDGE_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/wdt.h>
-		#include <avr/power.h>
-		#include <avr/interrupt.h>
-		#include <util/delay.h>
-
-		#include "USARTDescriptors.h"
-
-		#include "AVRISPDescriptors.h"
-		#include "Lib/V2Protocol.h"
-		#include "Lib/SoftUART.h"
-		#include "Config/AppConfig.h"
-
-		#include <LUFA/Drivers/Board/LEDs.h>
-		#include <LUFA/Drivers/Misc/RingBuffer.h>
-		#include <LUFA/Drivers/USB/USB.h>
-		#include <LUFA/Platform/Platform.h>
-
-	/* Macros: */
-		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
-		#define LEDMASK_USB_NOTREADY     LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
-		#define LEDMASK_USB_ENUMERATING  LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
-		#define LEDMASK_USB_READY        LEDS_NO_LEDS
-
-		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
-		#define LEDMASK_USB_ERROR        LEDS_LED1
-
-		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
-		#define LEDMASK_BUSY             LEDS_LED1
-
-		/** Firmware mode define for the USART Bridge mode. */
-		#define MODE_USART_BRIDGE        false
-
-		/** Firmware mode define for the AVRISP Programmer mode. */
-		#define MODE_PDI_PROGRAMMER      true
-
-	/* External Variables: */
-		extern bool         CurrentFirmwareMode;
-		extern RingBuffer_t UARTtoUSB_Buffer;
-		extern RingBuffer_t USBtoUART_Buffer;
-
-	/* Function Prototypes: */
-		void SetupHardware(void);
-		void AVRISP_Task(void);
-		void UARTBridge_Task(void);
-
-		void EVENT_USB_Device_ConfigurationChanged(void);
-		void EVENT_USB_Device_ControlRequest(void);
-		void EVENT_USB_Device_Connect(void);
-		void EVENT_USB_Device_Disconnect(void);
-
-		void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo);
-
-		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-		                                    const uint8_t wIndex,
-		                                    const void** const DescriptorAddress,
-		                                    uint8_t* const DescriptorMemorySpace)
-		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3) ATTR_NON_NULL_PTR_ARG(4);
-
-#endif
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/XPLAINBridge.txt b/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/XPLAINBridge.txt
deleted file mode 100644
index 45557ef976..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/XPLAINBridge.txt
+++ /dev/null
@@ -1,109 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage XPLAIN UART Bridge/PDI Programmer Project
- *
- *  \section Sec_Compat Project Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li AT90USB1287
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this project.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>1) Device</td>
- *    <td>2) Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>1) Communications Device Class (CDC)</td>
- *    <td>2) Vendor Specific Class</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>1) Abstract Control Model (ACM)</td>
- *    <td>2) N/A</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>1) USBIF CDC Class Standard</td>
- *    <td>2) Atmel AVRISP MKII Protocol Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>1) Full Speed Mode</td>
- *    <td>2) Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  This project serves a dual purpose. When loaded into the USB AVR on the XPLAIN board, it will act as either a USB to Serial
- *  converter for the XPLAIN's hardware USART (at a speed of 9600 baud), or an AVRStudio compatible PDI programmer for the XMEGA.
- *  This project replaces the firmware preloaded onto the XPLAIN's onboard AT90USB1287 microcontroller.
- *
- *  When power to the board is applied, the TDI pin (pin 9) of the USB AVR's JTAG port is read. If the pin is left high, the device
- *  will enumerate as a regular COM port on the host, which can then be opened and data exchanged between the XMEGA and Host as if
- *  the XMEGA was connected directly to the host's serial port. If the pin is pulled low by shorting it to GND (pin 10), the device
- *  will enumerate as an AVRISP-MKII to the host, so that the XMEGA can be reprogrammed by AVRStudio or other compatible software
- *  such as avrdude by connecting to the board as if it was an Atmel AVRISP-MKII programmer.
- *
- *  After running this project in serial bridge mode for the first time on a new computer, you will need to supply the .INF file
- *  located in this project project's directory as the device's driver when running under Windows. This will enable Windows to use
- *  its inbuilt CDC virtual serial drivers, negating the need for custom drivers for the device. Other Operating Systems should
- *  automatically use their own inbuilt CDC-ACM drivers.
- *
- *  In serial bridge mode, the UART baud rate can be altered through the host terminal software to select a new baud rate - the default
- *  baud is 9600. Note that parity, data bits and stop bits are fixed at none, eight and one respectively can cannot be altered. Changes
- *  to the connection's parity, data bits or stop bits are ignored by the firmware. As the serial link between the controllers on the
- *  XPLAIN is software emulated by the USB AVR, not all baud rates will work correctly.
- *
- *  This project relies on files from the LUFA AVRISP-MKII project for compilation.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>LIBUSB_DRIVER_COMPAT</td>
- *    <td>AppConfig.h</td>
- *    <td>Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making
- *        the code compatible with software such as avrdude (all platforms) that use the libUSB driver.
- *
- *        \note This option is incompatible with \c RESET_TOGGLES_LIBUSB_COMPAT.</td>
- *   </tr>
- *   <tr>
- *    <td>RESET_TOGGLES_LIBUSB_COMPAT</td>
- *    <td>Makefile LUFA_OPTS</td>
- *    <td>Define to make the /RESET line of the AVR toggle between Jungo and libUSB driver compatibility modes. Each time the AVR is
- *        reset externally via the reset pin, the compatibility mode will be toggled. The compatibility mode is preserved between
- *        power cycles and is not toggled via other forms of reset such as Watchdog or Brown Out.
- *
- *        When this option is enabled, all board LEDs will flash twice on startup for Jungo compatibility mode, and five times for
- *        libUSB compatibility mode.
- *
- *        \note This option is incompatible with \c LIBUSB_DRIVER_COMPAT.</td>
- *   </tr>
- *   <tr>
- *    <td>FIRMWARE_VERSION_MINOR</td>
- *    <td>AppConfig.h</td>
- *    <td>Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible
- *        with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here.</td>
- *   </tr>
- *  </table>
- */
-
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/asf.xml
deleted file mode 100644
index 7aa2107cc2..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/asf.xml
+++ /dev/null
@@ -1,57 +0,0 @@
-<asf xmlversion="1.0">

-	<project caption="XPLAIN Bridge" id="lufa.projects.xplain_bridge.avr8">

-		<require idref="lufa.projects.xplain_bridge"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="usbkey"/>

-

-		<build type="define" name="F_CPU" value="8000000UL"/>

-		<build type="define" name="F_USB" value="8000000UL"/>

-	</project>

-

-	<module type="application" id="lufa.projects.xplain_bridge" caption="XPLAIN Bridge">

-		<info type="description" value="summary">

-		Bridge firmware for the original (green) XPLAIN board, for programming and USB virtual serial communications.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Class Driver APIs"/>

-			<keyword value="USB Device"/>

-			<keyword value="CDC Class"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="XPLAINBridge.txt"/>

-		<build type="distribute" subtype="user-file" value="LUFA XPLAIN Bridge.inf"/>

-

-		<build type="c-source" value="XPLAINBridge.c"/>

-		<build type="c-source" value="USARTDescriptors.c"/>

-		<build type="header-file" value="XPLAINBridge.h"/>

-		<build type="header-file" value="USARTDescriptors.h"/>

-

-		<build type="c-source" value="Lib/SoftUART.c"/>

-		<build type="header-file" value="Lib/SoftUART.h"/>

-

-		<require idref="lufa.projects.avrispmkii_clone.src"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.misc.ringbuffer"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/doxyfile b/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/doxyfile
deleted file mode 100644
index f3498adb94..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/doxyfile
+++ /dev/null
@@ -1,2364 +0,0 @@
-# Doxyfile 1.8.8
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "LUFA Library - XPLAIN Serial Bridge/PDI Programmer Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
-# characters to appear in the names of generated files. If set to NO, non-ASCII
-# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
-# U+3044.
-# The default value is: NO.
-
-ALLOW_UNICODE_NAMES    = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       = "The $name class" \
-                         "The $name widget" \
-                         "The $name file" \
-                         is \
-                         provides \
-                         specifies \
-                         contains \
-                         represents \
-                         a \
-                         an \
-                         the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = YES
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is fixed
-# or free formatted code, this is the default for Fortran type files), VHDL. For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = NO
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = NO
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = NO
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. See also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          = *.h \
-                         *.c \
-                         *.txt
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                = Documentation/
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        = __* \
-                         INCLUDE_FROM_*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = NO
-
-# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
-# Note: The availability of this option depends on whether or not doxygen was
-# compiled with the --with-libclang option.
-# The default value is: NO.
-
-CLANG_ASSISTED_PARSING = NO
-
-# If clang assisted parsing is enabled you can provide the compiler with command
-# line options that you would normally use when invoking the compiler. Note that
-# the include paths will already be set by doxygen for the files and directories
-# specified with INPUT and INCLUDE_PATH.
-# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
-
-CLANG_OPTIONS          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
-# cascading style sheets that are included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet files to the output directory.
-# Note: The order of the extra stylesheet files is of importance (e.g. the last
-# stylesheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
-# enables the Previous and Next buttons.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = NO
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
-# setting. When disabled, doxygen will generate a PHP script for searching and
-# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
-# and searching needs to be provided by external tools. See the section
-# "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
-# for the replacement values of the other commands the user is refered to
-# HTML_HEADER.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
-# LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# The MAN_SUBDIR tag determines the name of the directory created within
-# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
-# MAN_EXTENSION with the initial . removed.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_SUBDIR             =
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = YES
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             = __DOXYGEN__ \
-                         PROGMEM
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all references to function-like macros that are alone on a line, have
-# an all uppercase name, and do not end with a semicolon. Such function macros
-# are typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have a unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           =
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = NO
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = NO
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = NO
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = NO
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = NO
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = NO
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = NO
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-PLANTUML_JAR_PATH      =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/makefile
deleted file mode 100644
index 68e0a70885..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/XPLAINBridge/makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-# Run "make help" for target help.
-
-AVRISP_PATH  = ../AVRISP-MKII
-
-MCU          = at90usb1287
-ARCH         = AVR8
-BOARD        = XPLAIN
-F_CPU        = 8000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = XPLAINBridge
-SRC          = $(TARGET).c Lib/SoftUART.c USARTDescriptors.c $(AVRISP_PATH)/AVRISPDescriptors.c $(AVRISP_PATH)/Lib/V2Protocol.c \
-               $(AVRISP_PATH)/Lib/V2ProtocolParams.c $(AVRISP_PATH)/Lib/ISP/ISPProtocol.c $(AVRISP_PATH)/Lib/ISP/ISPTarget.c \
-               $(AVRISP_PATH)/Lib/XPROG/XPROGProtocol.c $(AVRISP_PATH)/Lib/XPROG/XPROGTarget.c $(AVRISP_PATH)/Lib/XPROG/XMEGANVM.c \
-               $(AVRISP_PATH)/Lib/XPROG/TINYNVM.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -I$(AVRISP_PATH)
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Since this project borrows files from the AVRISP-MKII project which may also have an
-# identical OBJDIR directory, we need to enforce the use of this project's object file
-# directory as the one where the build object files are to be stored by pre-pending the
-# absolute path of the current project to the OBJDIR variable.
-ifneq ($(OBJDIR),)
-  override OBJDIR:=$(shell pwd)/$(OBJDIR)
-endif
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Projects/makefile b/tmk_core/protocol/lufa/LUFA-git/Projects/makefile
deleted file mode 100644
index 6552c59401..0000000000
--- a/tmk_core/protocol/lufa/LUFA-git/Projects/makefile
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2014.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-
-# Makefile to build all the LUFA Projects. Call with "make all" to
-# rebuild all projects.
-
-# Projects are pre-cleaned before each one is built, to ensure any
-# custom LUFA library build options are reflected in the compiled
-# code.
-
-PROJECT_DIRECTORIES := $(shell ls -d */)
-
-# This makefile is potentially infinitely recursive if something really bad
-# happens when determining the set of project directories - hard-abort if
-# more than 10 levels deep to avoid angry emails.
-ifeq ($(MAKELEVEL), 10)
-   $(error EMERGENCY ABORT: INFINITE RECURSION DETECTED)
-endif
-
-# Need to special-case building without a per-project object directory
-ifeq ($(OBJDIR),)
-   # If no target specified, force "clean all" and disallow parallel build
-   ifeq ($(MAKECMDGOALS),)
-      MAKECMDGOALS := clean all
-      .NOTPARALLEL:
-   endif
-
-   # If one of the targets is to build, force "clean" beforehand and disallow parallel build
-   ifneq ($(findstring all, $(MAKECMDGOALS)),)
-      MAKECMDGOALS := clean $(MAKECMDGOALS)
-      .NOTPARALLEL:
-   endif
-endif
-
-%: $(PROJECT_DIRECTORIES)
-	@echo . > /dev/null
-
-$(PROJECT_DIRECTORIES):
-	@$(MAKE) -C $@ $(MAKECMDGOALS)
-
-.PHONY: $(PROJECT_DIRECTORIES)
-
diff --git a/tmk_core/protocol/lufa/lufa.h b/tmk_core/protocol/lufa/lufa.h
index af01bf6b9d..aad08d6407 100644
--- a/tmk_core/protocol/lufa/lufa.h
+++ b/tmk_core/protocol/lufa/lufa.h
@@ -49,7 +49,7 @@
 #include <LUFA/Drivers/USB/USB.h>
 #include "host.h"
 #ifdef MIDI_ENABLE
-  #include "midi/midi.h"
+  #include "midi.h"
 #endif
 #ifdef __cplusplus
 extern "C" {
diff --git a/tmk_core/protocol/midi.mk b/tmk_core/protocol/midi.mk
new file mode 100644
index 0000000000..c85ae42ff2
--- /dev/null
+++ b/tmk_core/protocol/midi.mk
@@ -0,0 +1,9 @@
+MIDI_DIR = protocol/midi
+
+SRC += midi.c \
+	   midi_device.c \
+	   bytequeue/bytequeue.c \
+	   bytequeue/interrupt_setting.c \
+	   $(LUFA_SRC_USBCLASS)
+
+VPATH += $(TMK_PATH)/$(MIDI_DIR)
\ No newline at end of file
diff --git a/tmk_core/protocol/lufa/midi/Config/LUFAConfig.h b/tmk_core/protocol/midi/Config/LUFAConfig.h
index fa9404498f..fa9404498f 100755
--- a/tmk_core/protocol/lufa/midi/Config/LUFAConfig.h
+++ b/tmk_core/protocol/midi/Config/LUFAConfig.h
diff --git a/tmk_core/protocol/lufa/midi/bytequeue/COPYING b/tmk_core/protocol/midi/bytequeue/COPYING
index 94a9ed024d..94a9ed024d 100755
--- a/tmk_core/protocol/lufa/midi/bytequeue/COPYING
+++ b/tmk_core/protocol/midi/bytequeue/COPYING
diff --git a/tmk_core/protocol/lufa/midi/bytequeue/bytequeue.c b/tmk_core/protocol/midi/bytequeue/bytequeue.c
index e434956328..e434956328 100755
--- a/tmk_core/protocol/lufa/midi/bytequeue/bytequeue.c
+++ b/tmk_core/protocol/midi/bytequeue/bytequeue.c
diff --git a/tmk_core/protocol/lufa/midi/bytequeue/bytequeue.h b/tmk_core/protocol/midi/bytequeue/bytequeue.h
index e4a286134f..e4a286134f 100755
--- a/tmk_core/protocol/lufa/midi/bytequeue/bytequeue.h
+++ b/tmk_core/protocol/midi/bytequeue/bytequeue.h
diff --git a/tmk_core/protocol/lufa/midi/bytequeue/interrupt_setting.c b/tmk_core/protocol/midi/bytequeue/interrupt_setting.c
index eafef527c0..eafef527c0 100755
--- a/tmk_core/protocol/lufa/midi/bytequeue/interrupt_setting.c
+++ b/tmk_core/protocol/midi/bytequeue/interrupt_setting.c
diff --git a/tmk_core/protocol/lufa/midi/bytequeue/interrupt_setting.h b/tmk_core/protocol/midi/bytequeue/interrupt_setting.h
index 053d02c9d0..053d02c9d0 100755
--- a/tmk_core/protocol/lufa/midi/bytequeue/interrupt_setting.h
+++ b/tmk_core/protocol/midi/bytequeue/interrupt_setting.h
diff --git a/tmk_core/protocol/lufa/midi/midi.c b/tmk_core/protocol/midi/midi.c
index 11a589078c..11a589078c 100755
--- a/tmk_core/protocol/lufa/midi/midi.c
+++ b/tmk_core/protocol/midi/midi.c
diff --git a/tmk_core/protocol/lufa/midi/midi.h b/tmk_core/protocol/midi/midi.h
index 1a36737df8..1a36737df8 100755
--- a/tmk_core/protocol/lufa/midi/midi.h
+++ b/tmk_core/protocol/midi/midi.h
diff --git a/tmk_core/protocol/lufa/midi/midi_device.c b/tmk_core/protocol/midi/midi_device.c
index 3215a007d5..3215a007d5 100755
--- a/tmk_core/protocol/lufa/midi/midi_device.c
+++ b/tmk_core/protocol/midi/midi_device.c
diff --git a/tmk_core/protocol/lufa/midi/midi_device.h b/tmk_core/protocol/midi/midi_device.h
index 088995286c..088995286c 100755
--- a/tmk_core/protocol/lufa/midi/midi_device.h
+++ b/tmk_core/protocol/midi/midi_device.h
diff --git a/tmk_core/protocol/lufa/midi/midi_function_types.h b/tmk_core/protocol/midi/midi_function_types.h
index 35c4601b20..35c4601b20 100755
--- a/tmk_core/protocol/lufa/midi/midi_function_types.h
+++ b/tmk_core/protocol/midi/midi_function_types.h
diff --git a/tmk_core/protocol/lufa/midi/sysex_tools.c b/tmk_core/protocol/midi/sysex_tools.c
index 7563a3e2aa..7563a3e2aa 100755
--- a/tmk_core/protocol/lufa/midi/sysex_tools.c
+++ b/tmk_core/protocol/midi/sysex_tools.c
diff --git a/tmk_core/protocol/lufa/midi/sysex_tools.h b/tmk_core/protocol/midi/sysex_tools.h
index 3654d0114f..3654d0114f 100755
--- a/tmk_core/protocol/lufa/midi/sysex_tools.h
+++ b/tmk_core/protocol/midi/sysex_tools.h